selftests: net-drv: remove the nic_performance and nic_link_layer tests

Revert fbbf93556f0c ("selftests: nic_performance: Add selftest for performance of NIC driver")
Revert c087dc54394b ("selftests: nic_link_layer: Add selftest case for speed and duplex states")
Revert 6116075e18f7 ("selftests: nic_link_layer: Add link layer selftest for NIC driver")

These tests don't clean up after themselves, don't use the disruptive
annotations, don't get included in make install etc. etc. The tests
were added before we have any "HW" runner, so the issues were missed.
Our CI doesn't have any way of excluding broken tests, remove these
for now to stop the random pollution of results due to broken env.
We can always add them back once / if fixed.

Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Reviewed-by: David Wei <dw@davidwei.uk>
Link: https://patch.msgid.link/20250507140109.929801-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

1 files changed, 0 insertions, 113 deletions

diff --git a/tools/testing/selftests/drivers/net/hw/nic_link_layer.py b/tools/testing/selftests/drivers/net/hw/nic_link_layer.py
deleted file mode 100644
index efd921180532..000000000000
--- a/tools/testing/selftests/drivers/net/hw/nic_link_layer.py
+++ /dev/null
@@ -1,113 +0,0 @@
-#!/usr/bin/env python3
-# SPDX-License-Identifier: GPL-2.0
-
-#Introduction:
-#This file has basic link layer tests for generic NIC drivers.
-#The test comprises of auto-negotiation, speed and duplex checks.
-#
-#Setup:
-#Connect the DUT PC with NIC card to partner pc back via ethernet medium of your choice(RJ45, T1)
-#
-#        DUT PC                                              Partner PC
-#┌───────────────────────┐                         ┌──────────────────────────┐
-#│                       │                         │                          │
-#│                       │                         │                          │
-#│           ┌───────────┐                         │                          │
-#│           │DUT NIC    │         Eth             │                          │
-#│           │Interface ─┼─────────────────────────┼─    any eth Interface    │
-#│           └───────────┘                         │                          │
-#│                       │                         │                          │
-#│                       │                         │                          │
-#└───────────────────────┘                         └──────────────────────────┘
-#
-#Configurations:
-#Required minimum ethtool version is 6.10 (supports json)
-#Default values:
-#time_delay = 8 #time taken to wait for transitions to happen, in seconds.
-
-import time
-import argparse
-from lib.py import ksft_run, ksft_exit, ksft_pr, ksft_eq
-from lib.py import KsftFailEx, KsftSkipEx
-from lib.py import NetDrvEpEnv
-from lib.py import LinkConfig
-
-def _pre_test_checks(cfg: object, link_config: LinkConfig) -> None:
-    if link_config.partner_netif is None:
-        KsftSkipEx("Partner interface is not available")
-    if not link_config.check_autoneg_supported() or not link_config.check_autoneg_supported(remote=True):
-        KsftSkipEx(f"Auto-negotiation not supported for interface {cfg.ifname} or {link_config.partner_netif}")
-    if not link_config.verify_link_up():
-        raise KsftSkipEx(f"Link state of interface {cfg.ifname} is DOWN")
-
-def verify_autonegotiation(cfg: object, expected_state: str, link_config: LinkConfig) -> None:
-    if not link_config.verify_link_up():
-        raise KsftSkipEx(f"Link state of interface {cfg.ifname} is DOWN")
-    """Verifying the autonegotiation state in partner"""
-    partner_autoneg_output = link_config.get_ethtool_field("auto-negotiation", remote=True)
-    if partner_autoneg_output is None:
-        KsftSkipEx(f"Auto-negotiation state not available for interface {link_config.partner_netif}")
-    partner_autoneg_state = "on" if partner_autoneg_output is True else "off"
-
-    ksft_eq(partner_autoneg_state, expected_state)
-
-    """Verifying the autonegotiation state of local"""
-    autoneg_output = link_config.get_ethtool_field("auto-negotiation")
-    if autoneg_output is None:
-        KsftSkipEx(f"Auto-negotiation state not available for interface {cfg.ifname}")
-    actual_state = "on" if autoneg_output is True else "off"
-
-    ksft_eq(actual_state, expected_state)
-
-    """Verifying the link establishment"""
-    link_available = link_config.get_ethtool_field("link-detected")
-    if link_available is None:
-        KsftSkipEx(f"Link status not available for interface {cfg.ifname}")
-    if link_available != True:
-        raise KsftSkipEx("Link not established at interface {cfg.ifname} after changing auto-negotiation")
-
-def test_autonegotiation(cfg: object, link_config: LinkConfig, time_delay: int) -> None:
-    _pre_test_checks(cfg, link_config)
-    for state in ["off", "on"]:
-        if not link_config.set_autonegotiation_state(state, remote=True):
-            raise KsftSkipEx(f"Unable to set auto-negotiation state for interface {link_config.partner_netif}")
-        if not link_config.set_autonegotiation_state(state):
-            raise KsftSkipEx(f"Unable to set auto-negotiation state for interface {cfg.ifname}")
-        time.sleep(time_delay)
-        verify_autonegotiation(cfg, state, link_config)
-
-def test_network_speed(cfg: object, link_config: LinkConfig, time_delay: int) -> None:
-    _pre_test_checks(cfg, link_config)
-    common_link_modes = link_config.common_link_modes
-    if not common_link_modes:
-        KsftSkipEx("No common link modes exist")
-    speeds, duplex_modes = link_config.get_speed_duplex_values(common_link_modes)
-
-    if speeds and duplex_modes and len(speeds) == len(duplex_modes):
-        for idx in range(len(speeds)):
-            speed = speeds[idx]
-            duplex = duplex_modes[idx]
-            if not link_config.set_speed_and_duplex(speed, duplex):
-                raise KsftFailEx(f"Unable to set speed and duplex parameters for {cfg.ifname}")
-            time.sleep(time_delay)
-            if not link_config.verify_speed_and_duplex(speed, duplex):
-                raise KsftSkipEx(f"Error occurred while verifying speed and duplex states for interface {cfg.ifname}")
-    else:
-        if not speeds or not duplex_modes:
-            KsftSkipEx(f"No supported speeds or duplex modes found for interface {cfg.ifname}")
-        else:
-            KsftSkipEx("Mismatch in the number of speeds and duplex modes")
-
-def main() -> None:
-    parser = argparse.ArgumentParser(description="Run basic link layer tests for NIC driver")
-    parser.add_argument('--time-delay', type=int, default=8, help='Time taken to wait for transitions to happen(in seconds). Default is 8 seconds.')
-    args = parser.parse_args()
-    time_delay = args.time_delay
-    with NetDrvEpEnv(__file__, nsim_test=False) as cfg:
-        link_config = LinkConfig(cfg)
-        ksft_run(globs=globals(), case_pfx={"test_"}, args=(cfg, link_config, time_delay,))
-        link_config.reset_interface()
-    ksft_exit()
-
-if __name__ == "__main__":
-    main()