diff options
Diffstat (limited to 'kernel/sched/ext.c')
| -rw-r--r-- | kernel/sched/ext.c | 1034 |
1 files changed, 0 insertions, 1034 deletions
diff --git a/kernel/sched/ext.c b/kernel/sched/ext.c index fda2b4e85ee3..7e15e852370c 100644 --- a/kernel/sched/ext.c +++ b/kernel/sched/ext.c @@ -9,1040 +9,6 @@ #include <linux/btf_ids.h> #include "ext_idle.h" -#define SCX_OP_IDX(op) (offsetof(struct sched_ext_ops, op) / sizeof(void (*)(void))) - -enum scx_consts { - SCX_DSP_DFL_MAX_BATCH = 32, - SCX_DSP_MAX_LOOPS = 32, - SCX_WATCHDOG_MAX_TIMEOUT = 30 * HZ, - - SCX_EXIT_BT_LEN = 64, - SCX_EXIT_MSG_LEN = 1024, - SCX_EXIT_DUMP_DFL_LEN = 32768, - - SCX_CPUPERF_ONE = SCHED_CAPACITY_SCALE, - - /* - * Iterating all tasks may take a while. Periodically drop - * scx_tasks_lock to avoid causing e.g. CSD and RCU stalls. - */ - SCX_TASK_ITER_BATCH = 32, -}; - -enum scx_exit_kind { - SCX_EXIT_NONE, - SCX_EXIT_DONE, - - SCX_EXIT_UNREG = 64, /* user-space initiated unregistration */ - SCX_EXIT_UNREG_BPF, /* BPF-initiated unregistration */ - SCX_EXIT_UNREG_KERN, /* kernel-initiated unregistration */ - SCX_EXIT_SYSRQ, /* requested by 'S' sysrq */ - - SCX_EXIT_ERROR = 1024, /* runtime error, error msg contains details */ - SCX_EXIT_ERROR_BPF, /* ERROR but triggered through scx_bpf_error() */ - SCX_EXIT_ERROR_STALL, /* watchdog detected stalled runnable tasks */ -}; - -/* - * An exit code can be specified when exiting with scx_bpf_exit() or scx_exit(), - * corresponding to exit_kind UNREG_BPF and UNREG_KERN respectively. The codes - * are 64bit of the format: - * - * Bits: [63 .. 48 47 .. 32 31 .. 0] - * [ SYS ACT ] [ SYS RSN ] [ USR ] - * - * SYS ACT: System-defined exit actions - * SYS RSN: System-defined exit reasons - * USR : User-defined exit codes and reasons - * - * Using the above, users may communicate intention and context by ORing system - * actions and/or system reasons with a user-defined exit code. - */ -enum scx_exit_code { - /* Reasons */ - SCX_ECODE_RSN_HOTPLUG = 1LLU << 32, - - /* Actions */ - SCX_ECODE_ACT_RESTART = 1LLU << 48, -}; - -/* - * scx_exit_info is passed to ops.exit() to describe why the BPF scheduler is - * being disabled. - */ -struct scx_exit_info { - /* %SCX_EXIT_* - broad category of the exit reason */ - enum scx_exit_kind kind; - - /* exit code if gracefully exiting */ - s64 exit_code; - - /* textual representation of the above */ - const char *reason; - - /* backtrace if exiting due to an error */ - unsigned long *bt; - u32 bt_len; - - /* informational message */ - char *msg; - - /* debug dump */ - char *dump; -}; - -/* sched_ext_ops.flags */ -enum scx_ops_flags { - /* - * Keep built-in idle tracking even if ops.update_idle() is implemented. - */ - SCX_OPS_KEEP_BUILTIN_IDLE = 1LLU << 0, - - /* - * By default, if there are no other task to run on the CPU, ext core - * keeps running the current task even after its slice expires. If this - * flag is specified, such tasks are passed to ops.enqueue() with - * %SCX_ENQ_LAST. See the comment above %SCX_ENQ_LAST for more info. - */ - SCX_OPS_ENQ_LAST = 1LLU << 1, - - /* - * An exiting task may schedule after PF_EXITING is set. In such cases, - * bpf_task_from_pid() may not be able to find the task and if the BPF - * scheduler depends on pid lookup for dispatching, the task will be - * lost leading to various issues including RCU grace period stalls. - * - * To mask this problem, by default, unhashed tasks are automatically - * dispatched to the local DSQ on enqueue. If the BPF scheduler doesn't - * depend on pid lookups and wants to handle these tasks directly, the - * following flag can be used. - */ - SCX_OPS_ENQ_EXITING = 1LLU << 2, - - /* - * If set, only tasks with policy set to SCHED_EXT are attached to - * sched_ext. If clear, SCHED_NORMAL tasks are also included. - */ - SCX_OPS_SWITCH_PARTIAL = 1LLU << 3, - - /* - * A migration disabled task can only execute on its current CPU. By - * default, such tasks are automatically put on the CPU's local DSQ with - * the default slice on enqueue. If this ops flag is set, they also go - * through ops.enqueue(). - * - * A migration disabled task never invokes ops.select_cpu() as it can - * only select the current CPU. Also, p->cpus_ptr will only contain its - * current CPU while p->nr_cpus_allowed keeps tracking p->user_cpus_ptr - * and thus may disagree with cpumask_weight(p->cpus_ptr). - */ - SCX_OPS_ENQ_MIGRATION_DISABLED = 1LLU << 4, - - /* - * Queued wakeup (ttwu_queue) is a wakeup optimization that invokes - * ops.enqueue() on the ops.select_cpu() selected or the wakee's - * previous CPU via IPI (inter-processor interrupt) to reduce cacheline - * transfers. When this optimization is enabled, ops.select_cpu() is - * skipped in some cases (when racing against the wakee switching out). - * As the BPF scheduler may depend on ops.select_cpu() being invoked - * during wakeups, queued wakeup is disabled by default. - * - * If this ops flag is set, queued wakeup optimization is enabled and - * the BPF scheduler must be able to handle ops.enqueue() invoked on the - * wakee's CPU without preceding ops.select_cpu() even for tasks which - * may be executed on multiple CPUs. - */ - SCX_OPS_ALLOW_QUEUED_WAKEUP = 1LLU << 5, - - /* - * If set, enable per-node idle cpumasks. If clear, use a single global - * flat idle cpumask. - */ - SCX_OPS_BUILTIN_IDLE_PER_NODE = 1LLU << 6, - - /* - * CPU cgroup support flags - */ - SCX_OPS_HAS_CGROUP_WEIGHT = 1LLU << 16, /* DEPRECATED, will be removed on 6.18 */ - - SCX_OPS_ALL_FLAGS = SCX_OPS_KEEP_BUILTIN_IDLE | - SCX_OPS_ENQ_LAST | - SCX_OPS_ENQ_EXITING | - SCX_OPS_ENQ_MIGRATION_DISABLED | - SCX_OPS_ALLOW_QUEUED_WAKEUP | - SCX_OPS_SWITCH_PARTIAL | - SCX_OPS_BUILTIN_IDLE_PER_NODE | - SCX_OPS_HAS_CGROUP_WEIGHT, - - /* high 8 bits are internal, don't include in SCX_OPS_ALL_FLAGS */ - __SCX_OPS_INTERNAL_MASK = 0xffLLU << 56, - - SCX_OPS_HAS_CPU_PREEMPT = 1LLU << 56, -}; - -/* argument container for ops.init_task() */ -struct scx_init_task_args { - /* - * Set if ops.init_task() is being invoked on the fork path, as opposed - * to the scheduler transition path. - */ - bool fork; -#ifdef CONFIG_EXT_GROUP_SCHED - /* the cgroup the task is joining */ - struct cgroup *cgroup; -#endif -}; - -/* argument container for ops.exit_task() */ -struct scx_exit_task_args { - /* Whether the task exited before running on sched_ext. */ - bool cancelled; -}; - -/* argument container for ops->cgroup_init() */ -struct scx_cgroup_init_args { - /* the weight of the cgroup [1..10000] */ - u32 weight; - - /* bandwidth control parameters from cpu.max and cpu.max.burst */ - u64 bw_period_us; - u64 bw_quota_us; - u64 bw_burst_us; -}; - -enum scx_cpu_preempt_reason { - /* next task is being scheduled by &sched_class_rt */ - SCX_CPU_PREEMPT_RT, - /* next task is being scheduled by &sched_class_dl */ - SCX_CPU_PREEMPT_DL, - /* next task is being scheduled by &sched_class_stop */ - SCX_CPU_PREEMPT_STOP, - /* unknown reason for SCX being preempted */ - SCX_CPU_PREEMPT_UNKNOWN, -}; - -/* - * Argument container for ops->cpu_acquire(). Currently empty, but may be - * expanded in the future. - */ -struct scx_cpu_acquire_args {}; - -/* argument container for ops->cpu_release() */ -struct scx_cpu_release_args { - /* the reason the CPU was preempted */ - enum scx_cpu_preempt_reason reason; - - /* the task that's going to be scheduled on the CPU */ - struct task_struct *task; -}; - -/* - * Informational context provided to dump operations. - */ -struct scx_dump_ctx { - enum scx_exit_kind kind; - s64 exit_code; - const char *reason; - u64 at_ns; - u64 at_jiffies; -}; - -/** - * struct sched_ext_ops - Operation table for BPF scheduler implementation - * - * A BPF scheduler can implement an arbitrary scheduling policy by - * implementing and loading operations in this table. Note that a userland - * scheduling policy can also be implemented using the BPF scheduler - * as a shim layer. - */ -struct sched_ext_ops { - /** - * @select_cpu: Pick the target CPU for a task which is being woken up - * @p: task being woken up - * @prev_cpu: the cpu @p was on before sleeping - * @wake_flags: SCX_WAKE_* - * - * Decision made here isn't final. @p may be moved to any CPU while it - * is getting dispatched for execution later. However, as @p is not on - * the rq at this point, getting the eventual execution CPU right here - * saves a small bit of overhead down the line. - * - * If an idle CPU is returned, the CPU is kicked and will try to - * dispatch. While an explicit custom mechanism can be added, - * select_cpu() serves as the default way to wake up idle CPUs. - * - * @p may be inserted into a DSQ directly by calling - * scx_bpf_dsq_insert(). If so, the ops.enqueue() will be skipped. - * Directly inserting into %SCX_DSQ_LOCAL will put @p in the local DSQ - * of the CPU returned by this operation. - * - * Note that select_cpu() is never called for tasks that can only run - * on a single CPU or tasks with migration disabled, as they don't have - * the option to select a different CPU. See select_task_rq() for - * details. - */ - s32 (*select_cpu)(struct task_struct *p, s32 prev_cpu, u64 wake_flags); - - /** - * @enqueue: Enqueue a task on the BPF scheduler - * @p: task being enqueued - * @enq_flags: %SCX_ENQ_* - * - * @p is ready to run. Insert directly into a DSQ by calling - * scx_bpf_dsq_insert() or enqueue on the BPF scheduler. If not directly - * inserted, the bpf scheduler owns @p and if it fails to dispatch @p, - * the task will stall. - * - * If @p was inserted into a DSQ from ops.select_cpu(), this callback is - * skipped. - */ - void (*enqueue)(struct task_struct *p, u64 enq_flags); - - /** - * @dequeue: Remove a task from the BPF scheduler - * @p: task being dequeued - * @deq_flags: %SCX_DEQ_* - * - * Remove @p from the BPF scheduler. This is usually called to isolate - * the task while updating its scheduling properties (e.g. priority). - * - * The ext core keeps track of whether the BPF side owns a given task or - * not and can gracefully ignore spurious dispatches from BPF side, - * which makes it safe to not implement this method. However, depending - * on the scheduling logic, this can lead to confusing behaviors - e.g. - * scheduling position not being updated across a priority change. - */ - void (*dequeue)(struct task_struct *p, u64 deq_flags); - - /** - * @dispatch: Dispatch tasks from the BPF scheduler and/or user DSQs - * @cpu: CPU to dispatch tasks for - * @prev: previous task being switched out - * - * Called when a CPU's local dsq is empty. The operation should dispatch - * one or more tasks from the BPF scheduler into the DSQs using - * scx_bpf_dsq_insert() and/or move from user DSQs into the local DSQ - * using scx_bpf_dsq_move_to_local(). - * - * The maximum number of times scx_bpf_dsq_insert() can be called - * without an intervening scx_bpf_dsq_move_to_local() is specified by - * ops.dispatch_max_batch. See the comments on top of the two functions - * for more details. - * - * When not %NULL, @prev is an SCX task with its slice depleted. If - * @prev is still runnable as indicated by set %SCX_TASK_QUEUED in - * @prev->scx.flags, it is not enqueued yet and will be enqueued after - * ops.dispatch() returns. To keep executing @prev, return without - * dispatching or moving any tasks. Also see %SCX_OPS_ENQ_LAST. - */ - void (*dispatch)(s32 cpu, struct task_struct *prev); - - /** - * @tick: Periodic tick - * @p: task running currently - * - * This operation is called every 1/HZ seconds on CPUs which are - * executing an SCX task. Setting @p->scx.slice to 0 will trigger an - * immediate dispatch cycle on the CPU. - */ - void (*tick)(struct task_struct *p); - - /** - * @runnable: A task is becoming runnable on its associated CPU - * @p: task becoming runnable - * @enq_flags: %SCX_ENQ_* - * - * This and the following three functions can be used to track a task's - * execution state transitions. A task becomes ->runnable() on a CPU, - * and then goes through one or more ->running() and ->stopping() pairs - * as it runs on the CPU, and eventually becomes ->quiescent() when it's - * done running on the CPU. - * - * @p is becoming runnable on the CPU because it's - * - * - waking up (%SCX_ENQ_WAKEUP) - * - being moved from another CPU - * - being restored after temporarily taken off the queue for an - * attribute change. - * - * This and ->enqueue() are related but not coupled. This operation - * notifies @p's state transition and may not be followed by ->enqueue() - * e.g. when @p is being dispatched to a remote CPU, or when @p is - * being enqueued on a CPU experiencing a hotplug event. Likewise, a - * task may be ->enqueue()'d without being preceded by this operation - * e.g. after exhausting its slice. - */ - void (*runnable)(struct task_struct *p, u64 enq_flags); - - /** - * @running: A task is starting to run on its associated CPU - * @p: task starting to run - * - * Note that this callback may be called from a CPU other than the - * one the task is going to run on. This can happen when a task - * property is changed (i.e., affinity), since scx_next_task_scx(), - * which triggers this callback, may run on a CPU different from - * the task's assigned CPU. - * - * Therefore, always use scx_bpf_task_cpu(@p) to determine the - * target CPU the task is going to use. - * - * See ->runnable() for explanation on the task state notifiers. - */ - void (*running)(struct task_struct *p); - - /** - * @stopping: A task is stopping execution - * @p: task stopping to run - * @runnable: is task @p still runnable? - * - * Note that this callback may be called from a CPU other than the - * one the task was running on. This can happen when a task - * property is changed (i.e., affinity), since dequeue_task_scx(), - * which triggers this callback, may run on a CPU different from - * the task's assigned CPU. - * - * Therefore, always use scx_bpf_task_cpu(@p) to retrieve the CPU - * the task was running on. - * - * See ->runnable() for explanation on the task state notifiers. If - * !@runnable, ->quiescent() will be invoked after this operation - * returns. - */ - void (*stopping)(struct task_struct *p, bool runnable); - - /** - * @quiescent: A task is becoming not runnable on its associated CPU - * @p: task becoming not runnable - * @deq_flags: %SCX_DEQ_* - * - * See ->runnable() for explanation on the task state notifiers. - * - * @p is becoming quiescent on the CPU because it's - * - * - sleeping (%SCX_DEQ_SLEEP) - * - being moved to another CPU - * - being temporarily taken off the queue for an attribute change - * (%SCX_DEQ_SAVE) - * - * This and ->dequeue() are related but not coupled. This operation - * notifies @p's state transition and may not be preceded by ->dequeue() - * e.g. when @p is being dispatched to a remote CPU. - */ - void (*quiescent)(struct task_struct *p, u64 deq_flags); - - /** - * @yield: Yield CPU - * @from: yielding task - * @to: optional yield target task - * - * If @to is NULL, @from is yielding the CPU to other runnable tasks. - * The BPF scheduler should ensure that other available tasks are - * dispatched before the yielding task. Return value is ignored in this - * case. - * - * If @to is not-NULL, @from wants to yield the CPU to @to. If the bpf - * scheduler can implement the request, return %true; otherwise, %false. - */ - bool (*yield)(struct task_struct *from, struct task_struct *to); - - /** - * @core_sched_before: Task ordering for core-sched - * @a: task A - * @b: task B - * - * Used by core-sched to determine the ordering between two tasks. See - * Documentation/admin-guide/hw-vuln/core-scheduling.rst for details on - * core-sched. - * - * Both @a and @b are runnable and may or may not currently be queued on - * the BPF scheduler. Should return %true if @a should run before @b. - * %false if there's no required ordering or @b should run before @a. - * - * If not specified, the default is ordering them according to when they - * became runnable. - */ - bool (*core_sched_before)(struct task_struct *a, struct task_struct *b); - - /** - * @set_weight: Set task weight - * @p: task to set weight for - * @weight: new weight [1..10000] - * - * Update @p's weight to @weight. - */ - void (*set_weight)(struct task_struct *p, u32 weight); - - /** - * @set_cpumask: Set CPU affinity - * @p: task to set CPU affinity for - * @cpumask: cpumask of cpus that @p can run on - * - * Update @p's CPU affinity to @cpumask. - */ - void (*set_cpumask)(struct task_struct *p, - const struct cpumask *cpumask); - - /** - * @update_idle: Update the idle state of a CPU - * @cpu: CPU to update the idle state for - * @idle: whether entering or exiting the idle state - * - * This operation is called when @rq's CPU goes or leaves the idle - * state. By default, implementing this operation disables the built-in - * idle CPU tracking and the following helpers become unavailable: - * - * - scx_bpf_select_cpu_dfl() - * - scx_bpf_select_cpu_and() - * - scx_bpf_test_and_clear_cpu_idle() - * - scx_bpf_pick_idle_cpu() - * - * The user also must implement ops.select_cpu() as the default - * implementation relies on scx_bpf_select_cpu_dfl(). - * - * Specify the %SCX_OPS_KEEP_BUILTIN_IDLE flag to keep the built-in idle - * tracking. - */ - void (*update_idle)(s32 cpu, bool idle); - - /** - * @cpu_acquire: A CPU is becoming available to the BPF scheduler - * @cpu: The CPU being acquired by the BPF scheduler. - * @args: Acquire arguments, see the struct definition. - * - * A CPU that was previously released from the BPF scheduler is now once - * again under its control. - */ - void (*cpu_acquire)(s32 cpu, struct scx_cpu_acquire_args *args); - - /** - * @cpu_release: A CPU is taken away from the BPF scheduler - * @cpu: The CPU being released by the BPF scheduler. - * @args: Release arguments, see the struct definition. - * - * The specified CPU is no longer under the control of the BPF - * scheduler. This could be because it was preempted by a higher - * priority sched_class, though there may be other reasons as well. The - * caller should consult @args->reason to determine the cause. - */ - void (*cpu_release)(s32 cpu, struct scx_cpu_release_args *args); - - /** - * @init_task: Initialize a task to run in a BPF scheduler - * @p: task to initialize for BPF scheduling - * @args: init arguments, see the struct definition - * - * Either we're loading a BPF scheduler or a new task is being forked. - * Initialize @p for BPF scheduling. This operation may block and can - * be used for allocations, and is called exactly once for a task. - * - * Return 0 for success, -errno for failure. An error return while - * loading will abort loading of the BPF scheduler. During a fork, it - * will abort that specific fork. - */ - s32 (*init_task)(struct task_struct *p, struct scx_init_task_args *args); - - /** - * @exit_task: Exit a previously-running task from the system - * @p: task to exit - * @args: exit arguments, see the struct definition - * - * @p is exiting or the BPF scheduler is being unloaded. Perform any - * necessary cleanup for @p. - */ - void (*exit_task)(struct task_struct *p, struct scx_exit_task_args *args); - - /** - * @enable: Enable BPF scheduling for a task - * @p: task to enable BPF scheduling for - * - * Enable @p for BPF scheduling. enable() is called on @p any time it - * enters SCX, and is always paired with a matching disable(). - */ - void (*enable)(struct task_struct *p); - - /** - * @disable: Disable BPF scheduling for a task - * @p: task to disable BPF scheduling for - * - * @p is exiting, leaving SCX or the BPF scheduler is being unloaded. - * Disable BPF scheduling for @p. A disable() call is always matched - * with a prior enable() call. - */ - void (*disable)(struct task_struct *p); - - /** - * @dump: Dump BPF scheduler state on error - * @ctx: debug dump context - * - * Use scx_bpf_dump() to generate BPF scheduler specific debug dump. - */ - void (*dump)(struct scx_dump_ctx *ctx); - - /** - * @dump_cpu: Dump BPF scheduler state for a CPU on error - * @ctx: debug dump context - * @cpu: CPU to generate debug dump for - * @idle: @cpu is currently idle without any runnable tasks - * - * Use scx_bpf_dump() to generate BPF scheduler specific debug dump for - * @cpu. If @idle is %true and this operation doesn't produce any - * output, @cpu is skipped for dump. - */ - void (*dump_cpu)(struct scx_dump_ctx *ctx, s32 cpu, bool idle); - - /** - * @dump_task: Dump BPF scheduler state for a runnable task on error - * @ctx: debug dump context - * @p: runnable task to generate debug dump for - * - * Use scx_bpf_dump() to generate BPF scheduler specific debug dump for - * @p. - */ - void (*dump_task)(struct scx_dump_ctx *ctx, struct task_struct *p); - -#ifdef CONFIG_EXT_GROUP_SCHED - /** - * @cgroup_init: Initialize a cgroup - * @cgrp: cgroup being initialized - * @args: init arguments, see the struct definition - * - * Either the BPF scheduler is being loaded or @cgrp created, initialize - * @cgrp for sched_ext. This operation may block. - * - * Return 0 for success, -errno for failure. An error return while - * loading will abort loading of the BPF scheduler. During cgroup - * creation, it will abort the specific cgroup creation. - */ - s32 (*cgroup_init)(struct cgroup *cgrp, - struct scx_cgroup_init_args *args); - - /** - * @cgroup_exit: Exit a cgroup - * @cgrp: cgroup being exited - * - * Either the BPF scheduler is being unloaded or @cgrp destroyed, exit - * @cgrp for sched_ext. This operation my block. - */ - void (*cgroup_exit)(struct cgroup *cgrp); - - /** - * @cgroup_prep_move: Prepare a task to be moved to a different cgroup - * @p: task being moved - * @from: cgroup @p is being moved from - * @to: cgroup @p is being moved to - * - * Prepare @p for move from cgroup @from to @to. This operation may - * block and can be used for allocations. - * - * Return 0 for success, -errno for failure. An error return aborts the - * migration. - */ - s32 (*cgroup_prep_move)(struct task_struct *p, - struct cgroup *from, struct cgroup *to); - - /** - * @cgroup_move: Commit cgroup move - * @p: task being moved - * @from: cgroup @p is being moved from - * @to: cgroup @p is being moved to - * - * Commit the move. @p is dequeued during this operation. - */ - void (*cgroup_move)(struct task_struct *p, - struct cgroup *from, struct cgroup *to); - - /** - * @cgroup_cancel_move: Cancel cgroup move - * @p: task whose cgroup move is being canceled - * @from: cgroup @p was being moved from - * @to: cgroup @p was being moved to - * - * @p was cgroup_prep_move()'d but failed before reaching cgroup_move(). - * Undo the preparation. - */ - void (*cgroup_cancel_move)(struct task_struct *p, - struct cgroup *from, struct cgroup *to); - - /** - * @cgroup_set_weight: A cgroup's weight is being changed - * @cgrp: cgroup whose weight is being updated - * @weight: new weight [1..10000] - * - * Update @cgrp's weight to @weight. - */ - void (*cgroup_set_weight)(struct cgroup *cgrp, u32 weight); - - /** - * @cgroup_set_bandwidth: A cgroup's bandwidth is being changed - * @cgrp: cgroup whose bandwidth is being updated - * @period_us: bandwidth control period - * @quota_us: bandwidth control quota - * @burst_us: bandwidth control burst - * - * Update @cgrp's bandwidth control parameters. This is from the cpu.max - * cgroup interface. - * - * @quota_us / @period_us determines the CPU bandwidth @cgrp is entitled - * to. For example, if @period_us is 1_000_000 and @quota_us is - * 2_500_000. @cgrp is entitled to 2.5 CPUs. @burst_us can be - * interpreted in the same fashion and specifies how much @cgrp can - * burst temporarily. The specific control mechanism and thus the - * interpretation of @period_us and burstiness is upto to the BPF - * scheduler. - */ - void (*cgroup_set_bandwidth)(struct cgroup *cgrp, - u64 period_us, u64 quota_us, u64 burst_us); - -#endif /* CONFIG_EXT_GROUP_SCHED */ - - /* - * All online ops must come before ops.cpu_online(). - */ - - /** - * @cpu_online: A CPU became online - * @cpu: CPU which just came up - * - * @cpu just came online. @cpu will not call ops.enqueue() or - * ops.dispatch(), nor run tasks associated with other CPUs beforehand. - */ - void (*cpu_online)(s32 cpu); - - /** - * @cpu_offline: A CPU is going offline - * @cpu: CPU which is going offline - * - * @cpu is going offline. @cpu will not call ops.enqueue() or - * ops.dispatch(), nor run tasks associated with other CPUs afterwards. - */ - void (*cpu_offline)(s32 cpu); - - /* - * All CPU hotplug ops must come before ops.init(). - */ - - /** - * @init: Initialize the BPF scheduler - */ - s32 (*init)(void); - - /** - * @exit: Clean up after the BPF scheduler - * @info: Exit info - * - * ops.exit() is also called on ops.init() failure, which is a bit - * unusual. This is to allow rich reporting through @info on how - * ops.init() failed. - */ - void (*exit)(struct scx_exit_info *info); - - /** - * @dispatch_max_batch: Max nr of tasks that dispatch() can dispatch - */ - u32 dispatch_max_batch; - - /** - * @flags: %SCX_OPS_* flags - */ - u64 flags; - - /** - * @timeout_ms: The maximum amount of time, in milliseconds, that a - * runnable task should be able to wait before being scheduled. The - * maximum timeout may not exceed the default timeout of 30 seconds. - * - * Defaults to the maximum allowed timeout value of 30 seconds. - */ - u32 timeout_ms; - - /** - * @exit_dump_len: scx_exit_info.dump buffer length. If 0, the default - * value of 32768 is used. - */ - u32 exit_dump_len; - - /** - * @hotplug_seq: A sequence number that may be set by the scheduler to - * detect when a hotplug event has occurred during the loading process. - * If 0, no detection occurs. Otherwise, the scheduler will fail to - * load if the sequence number does not match @scx_hotplug_seq on the - * enable path. - */ - u64 hotplug_seq; - - /** - * @name: BPF scheduler's name - * - * Must be a non-zero valid BPF object name including only isalnum(), - * '_' and '.' chars. Shows up in kernel.sched_ext_ops sysctl while the - * BPF scheduler is enabled. - */ - char name[SCX_OPS_NAME_LEN]; - - /* internal use only, must be NULL */ - void *priv; -}; - -enum scx_opi { - SCX_OPI_BEGIN = 0, - SCX_OPI_NORMAL_BEGIN = 0, - SCX_OPI_NORMAL_END = SCX_OP_IDX(cpu_online), - SCX_OPI_CPU_HOTPLUG_BEGIN = SCX_OP_IDX(cpu_online), - SCX_OPI_CPU_HOTPLUG_END = SCX_OP_IDX(init), - SCX_OPI_END = SCX_OP_IDX(init), -}; - -/* - * Collection of event counters. Event types are placed in descending order. - */ -struct scx_event_stats { - /* - * If ops.select_cpu() returns a CPU which can't be used by the task, - * the core scheduler code silently picks a fallback CPU. - */ - s64 SCX_EV_SELECT_CPU_FALLBACK; - - /* - * When dispatching to a local DSQ, the CPU may have gone offline in - * the meantime. In this case, the task is bounced to the global DSQ. - */ - s64 SCX_EV_DISPATCH_LOCAL_DSQ_OFFLINE; - - /* - * If SCX_OPS_ENQ_LAST is not set, the number of times that a task - * continued to run because there were no other tasks on the CPU. - */ - s64 SCX_EV_DISPATCH_KEEP_LAST; - - /* - * If SCX_OPS_ENQ_EXITING is not set, the number of times that a task - * is dispatched to a local DSQ when exiting. - */ - s64 SCX_EV_ENQ_SKIP_EXITING; - - /* - * If SCX_OPS_ENQ_MIGRATION_DISABLED is not set, the number of times a - * migration disabled task skips ops.enqueue() and is dispatched to its - * local DSQ. - */ - s64 SCX_EV_ENQ_SKIP_MIGRATION_DISABLED; - - /* - * Total number of times a task's time slice was refilled with the - * default value (SCX_SLICE_DFL). - */ - s64 SCX_EV_REFILL_SLICE_DFL; - - /* - * The total duration of bypass modes in nanoseconds. - */ - s64 SCX_EV_BYPASS_DURATION; - - /* - * The number of tasks dispatched in the bypassing mode. - */ - s64 SCX_EV_BYPASS_DISPATCH; - - /* - * The number of times the bypassing mode has been activated. - */ - s64 SCX_EV_BYPASS_ACTIVATE; -}; - -struct scx_sched { - struct sched_ext_ops ops; - DECLARE_BITMAP(has_op, SCX_OPI_END); - - /* - * Dispatch queues. - * - * The global DSQ (%SCX_DSQ_GLOBAL) is split per-node for scalability. - * This is to avoid live-locking in bypass mode where all tasks are - * dispatched to %SCX_DSQ_GLOBAL and all CPUs consume from it. If - * per-node split isn't sufficient, it can be further split. - */ - struct rhashtable dsq_hash; - struct scx_dispatch_q **global_dsqs; - - /* - * The event counters are in a per-CPU variable to minimize the - * accounting overhead. A system-wide view on the event counter is - * constructed when requested by scx_bpf_events(). - */ - struct scx_event_stats __percpu *event_stats_cpu; - - bool warned_zero_slice; - - atomic_t exit_kind; - struct scx_exit_info *exit_info; - - struct kobject kobj; - - struct kthread_worker *helper; - struct irq_work error_irq_work; - struct kthread_work disable_work; - struct rcu_work rcu_work; -}; - -enum scx_wake_flags { - /* expose select WF_* flags as enums */ - SCX_WAKE_FORK = WF_FORK, - SCX_WAKE_TTWU = WF_TTWU, - SCX_WAKE_SYNC = WF_SYNC, -}; - -enum scx_enq_flags { - /* expose select ENQUEUE_* flags as enums */ - SCX_ENQ_WAKEUP = ENQUEUE_WAKEUP, - SCX_ENQ_HEAD = ENQUEUE_HEAD, - SCX_ENQ_CPU_SELECTED = ENQUEUE_RQ_SELECTED, - - /* high 32bits are SCX specific */ - - /* - * Set the following to trigger preemption when calling - * scx_bpf_dsq_insert() with a local dsq as the target. The slice of the - * current task is cleared to zero and the CPU is kicked into the - * scheduling path. Implies %SCX_ENQ_HEAD. - */ - SCX_ENQ_PREEMPT = 1LLU << 32, - - /* - * The task being enqueued was previously enqueued on the current CPU's - * %SCX_DSQ_LOCAL, but was removed from it in a call to the - * scx_bpf_reenqueue_local() kfunc. If scx_bpf_reenqueue_local() was - * invoked in a ->cpu_release() callback, and the task is again - * dispatched back to %SCX_LOCAL_DSQ by this current ->enqueue(), the - * task will not be scheduled on the CPU until at least the next invocation - * of the ->cpu_acquire() callback. - */ - SCX_ENQ_REENQ = 1LLU << 40, - - /* - * The task being enqueued is the only task available for the cpu. By - * default, ext core keeps executing such tasks but when - * %SCX_OPS_ENQ_LAST is specified, they're ops.enqueue()'d with the - * %SCX_ENQ_LAST flag set. - * - * The BPF scheduler is responsible for triggering a follow-up - * scheduling event. Otherwise, Execution may stall. - */ - SCX_ENQ_LAST = 1LLU << 41, - - /* high 8 bits are internal */ - __SCX_ENQ_INTERNAL_MASK = 0xffLLU << 56, - - SCX_ENQ_CLEAR_OPSS = 1LLU << 56, - SCX_ENQ_DSQ_PRIQ = 1LLU << 57, -}; - -enum scx_deq_flags { - /* expose select DEQUEUE_* flags as enums */ - SCX_DEQ_SLEEP = DEQUEUE_SLEEP, - - /* high 32bits are SCX specific */ - - /* - * The generic core-sched layer decided to execute the task even though - * it hasn't been dispatched yet. Dequeue from the BPF side. - */ - SCX_DEQ_CORE_SCHED_EXEC = 1LLU << 32, -}; - -enum scx_pick_idle_cpu_flags { - SCX_PICK_IDLE_CORE = 1LLU << 0, /* pick a CPU whose SMT siblings are also idle */ - SCX_PICK_IDLE_IN_NODE = 1LLU << 1, /* pick a CPU in the same target NUMA node */ -}; - -enum scx_kick_flags { - /* - * Kick the target CPU if idle. Guarantees that the target CPU goes - * through at least one full scheduling cycle before going idle. If the - * target CPU can be determined to be currently not idle and going to go - * through a scheduling cycle before going idle, noop. - */ - SCX_KICK_IDLE = 1LLU << 0, - - /* - * Preempt the current task and execute the dispatch path. If the - * current task of the target CPU is an SCX task, its ->scx.slice is - * cleared to zero before the scheduling path is invoked so that the - * task expires and the dispatch path is invoked. - */ - SCX_KICK_PREEMPT = 1LLU << 1, - - /* - * Wait for the CPU to be rescheduled. The scx_bpf_kick_cpu() call will - * return after the target CPU finishes picking the next task. - */ - SCX_KICK_WAIT = 1LLU << 2, -}; - -enum scx_tg_flags { - SCX_TG_ONLINE = 1U << 0, - SCX_TG_INITED = 1U << 1, -}; - -enum scx_enable_state { - SCX_ENABLING, - SCX_ENABLED, - SCX_DISABLING, - SCX_DISABLED, -}; - -static const char *scx_enable_state_str[] = { - [SCX_ENABLING] = "enabling", - [SCX_ENABLED] = "enabled", - [SCX_DISABLING] = "disabling", - [SCX_DISABLED] = "disabled", -}; - -/* - * sched_ext_entity->ops_state - * - * Used to track the task ownership between the SCX core and the BPF scheduler. - * State transitions look as follows: - * - * NONE -> QUEUEING -> QUEUED -> DISPATCHING - * ^ | | - * | v v - * \-------------------------------/ - * - * QUEUEING and DISPATCHING states can be waited upon. See wait_ops_state() call - * sites for explanations on the conditions being waited upon and why they are - * safe. Transitions out of them into NONE or QUEUED must store_release and the - * waiters should load_acquire. - * - * Tracking scx_ops_state enables sched_ext core to reliably determine whether - * any given task can be dispatched by the BPF scheduler at all times and thus - * relaxes the requirements on the BPF scheduler. This allows the BPF scheduler - * to try to dispatch any task anytime regardless of its state as the SCX core - * can safely reject invalid dispatches. - */ -enum scx_ops_state { - SCX_OPSS_NONE, /* owned by the SCX core */ - SCX_OPSS_QUEUEING, /* in transit to the BPF scheduler */ - SCX_OPSS_QUEUED, /* owned by the BPF scheduler */ - SCX_OPSS_DISPATCHING, /* in transit back to the SCX core */ - - /* - * QSEQ brands each QUEUED instance so that, when dispatch races - * dequeue/requeue, the dispatcher can tell whether it still has a claim - * on the task being dispatched. - * - * As some 32bit archs can't do 64bit store_release/load_acquire, - * p->scx.ops_state is atomic_long_t which leaves 30 bits for QSEQ on - * 32bit machines. The dispatch race window QSEQ protects is very narrow - * and runs with IRQ disabled. 30 bits should be sufficient. - */ - SCX_OPSS_QSEQ_SHIFT = 2, -}; - -/* Use macros to ensure that the type is unsigned long for the masks */ -#define SCX_OPSS_STATE_MASK ((1LU << SCX_OPSS_QSEQ_SHIFT) - 1) -#define SCX_OPSS_QSEQ_MASK (~SCX_OPSS_STATE_MASK) - /* * NOTE: sched_ext is in the process of growing multiple scheduler support and * scx_root usage is in a transitional state. Naked dereferences are safe if the |