| Age | Commit message (Collapse) | Author |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply
Pull power supply and reset updates from Sebastian Reichel:
"Power-supply core:
- documentation fixes
power-supply drivers:
- add BD71828 charger driver
- add Richtek RT9756 driver
- max77705: add adaptive input current support
- max77705: add support for multiple devices
- misc small fixes
reset drivers:
- add spacemit-p1 poweroff/reboot driver"
* tag 'for-v6.19' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply:
Revert "power: supply: qcom_battmgr: support disabling charge control"
Documentation: power: rt9756: Document exported sysfs entries
power: supply: rt9756: Add Richtek RT9756 smart cap divider charger
dt-bindings: power: supply: Add Richtek RT9756 smart cap divider charger
driver: reset: spacemit-p1: add driver for poweroff/reboot
power: supply: apm_power: only unset own apm_get_power_status
power: supply: use ktime_divns() to avoid 64-bit division
docs: power: clean up power_supply_class.rst
power: supply: qcom_battmgr: support disabling charge control
power: supply: qcom_battmgr: clamp charge control thresholds
power: supply: wm831x: Check wm831x_set_bits() return value
power: supply: rt9467: Prevent using uninitialized local variable in rt9467_set_value_from_ranges()
power: supply: rt9467: Return error on failure in rt9467_set_value_from_ranges()
power: supply: max17040: Check iio_read_channel_processed() return code
power: supply: cw2015: Check devm_delayed_work_autocancel() return code
power: supply: rt5033_charger: Fix device node reference leaks
power: supply: max77705: Fix potential IRQ chip conflict when probing two devices
power: supply: max77705_charger: implement aicl feature
MAINTAINERS: Add entry for BD71828 charger
power: supply: Add bd718(15/28/78) charger driver
|
|
Merge PM QoS updates and a cpupower utility update for 6.19-rc1:
- Introduce and document a QoS limit on CPU exit latency during wakeup
from suspend-to-idle (Ulf Hansson)
- Add support for building libcpupower statically (Zuo An)
* pm-qos:
Documentation: power/cpuidle: Document the CPU system wakeup latency QoS
cpuidle: Respect the CPU system wakeup QoS limit for cpuidle
sched: idle: Respect the CPU system wakeup QoS limit for s2idle
pmdomain: Respect the CPU system wakeup QoS limit for cpuidle
pmdomain: Respect the CPU system wakeup QoS limit for s2idle
PM: QoS: Introduce a CPU system wakeup QoS limit
* pm-tools:
tools/power/cpupower: Support building libcpupower statically
|
|
Merge updates related to system suspend and hibernation for 6.19-rc1:
- Replace snprintf() with scnprintf() in show_trace_dev_match()
(Kaushlendra Kumar)
- Fix memory allocation error handling in pm_vt_switch_required()
(Malaya Kumar Rout)
- Introduce CALL_PM_OP() macro and use it to simplify code in
generic PM operations (Kaushlendra Kumar)
- Add module param to backtrace all CPUs in the device power management
watchdog (Sergey Senozhatsky)
- Rework message printing in swsusp_save() (Rafael Wysocki)
- Make it possible to change the number of hibernation compression
threads (Xueqin Luo)
- Clarify that only cgroup1 freezer uses PM freezer (Tejun Heo)
- Add document on debugging shutdown hangs to PM documentation and
correct a mistaken configuration option in it (Mario Limonciello)
- Shut down wakeup source timer before removing the wakeup source from
the list (Kaushlendra Kumar, Rafael Wysocki)
- Introduce new PMSG_POWEROFF event for system shutdown handling with
the help of PM device callbacks (Mario Limonciello)
- Make pm_test delay interruptible by wakeup events (Riwen Lu)
- Clean up kernel-doc comment style usage in the core hibernation
code and remove unuseful comments from it (Sunday Adelodun, Rafael
Wysocki)
- Add support for handling wakeup events and aborting the suspend
process while it is syncing file systems (Samuel Wu, Rafael Wysocki)
* pm-sleep: (21 commits)
PM: hibernate: Extra cleanup of comments in swap handling code
PM: sleep: Call pm_sleep_fs_sync() instead of ksys_sync_helper()
PM: sleep: Add support for wakeup during filesystem sync
PM: hibernate: Clean up kernel-doc comment style usage
PM: suspend: Make pm_test delay interruptible by wakeup events
usb: sl811-hcd: Add PM_EVENT_POWEROFF into suspend callbacks
scsi: Add PM_EVENT_POWEROFF into suspend callbacks
PM: Introduce new PMSG_POWEROFF event
PM: wakeup: Update after recent wakeup source removal ordering change
PM: wakeup: Delete timer before removing wakeup source from list
Documentation: power: Correct a mistaken configuration option
Documentation: power: Add document on debugging shutdown hangs
freezer: Clarify that only cgroup1 freezer uses PM freezer
PM: hibernate: add sysfs interface for hibernate_compression_threads
PM: hibernate: make compression threads configurable
PM: hibernate: dynamically allocate crc->unc_len/unc for configurable threads
PM: hibernate: Rework message printing in swsusp_save()
PM: dpm_watchdog: add module param to backtrace all CPUs
PM: sleep: Introduce CALL_PM_OP() macro to simplify code
PM: console: Fix memory allocation error handling in pm_vt_switch_required()
...
|
|
Let's document how the new CPU system wakeup latency QoS limit can be used
from user space, along with how the constraint is taken into account for
s2idle and cpuidle.
Reviewed-by: Dhruva Gole <d-gole@ti.com>
Reviewed-by: Kevin Hilman (TI) <khilman@baylibre.com>
Tested-by: Kevin Hilman (TI) <khilman@baylibre.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Link: https://patch.msgid.link/20251125112650.329269-7-ulf.hansson@linaro.org
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Somehow CONFIG_PSTORE_FIRMWARE ended up in this document when I intended
it to be CONFIG_CHROMEOS_PSTORE. Correct the configuration option and
make it clear that not all options are required.
Fixes: b1f02f005a2e ("Documentation: power: Add document on debugging shutdown hangs")
Reported-by: Rodrigo Siqueira <siqueira@igalia.com>
Signed-off-by: Mario Limonciello (AMD) <superm1@kernel.org>
[ rjw: Fixes: tag ]
Link: https://patch.msgid.link/20251106142524.3841343-1-superm1@kernel.org
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
If the kernel hangs while shutting down, ideally a UART log should
be captured to debug the problem. However if one isn't available,
users can use the pstore functionality to retrieve logs.
Add a document explaining how this works to make it more accessible
to users.
Tested-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Mario Limonciello (AMD) <superm1@kernel.org>
Link: https://patch.msgid.link/20251025004341.2386868-1-superm1@kernel.org
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Clean up grammar, punctuation, etc., in the power supply class
documentation.
Add article adjectives where needed.
Hyphenate some adjectives.
Fix punctuation.
Fix some verb usage (singular/plural).
Fix run-on sentences.
Add "is" in a few places.
Change "QA" to "Q&A".
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reviewed-by: Dhruva Gole <d-gole@ti.com>
Link: https://patch.msgid.link/20251014182008.823980-1-rdunlap@infradead.org
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
|
|
Drop confusing descriptions of pm_runtime_allow() and pm_runtime_forbid()
from Documentation/power/runtime_pm.rst and update the kerneldoc comments
of these functions to better explain their purpose.
Link: https://lore.kernel.org/linux-pm/08976178-298f-79d9-1d63-cff5a4e56cc3@linux.intel.com/
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Brian Norris <briannorris@chromium.org>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://patch.msgid.link/12780841.O9o76ZdvQC@rafael.j.wysocki
|
|
Pull documentation updates from Jonathan Corbet:
"It has been a relatively busy cycle in docsland, with changes all
over:
- Bring the kernel memory-model docs into the Sphinx build in the
"literal include" mode.
- Lots of build-infrastructure work, further cleaning up long-term
kernel-doc technical debt. The sphinx-pre-install tool has been
converted to Python and updated for current systems.
- A new tool to detect when documents have been moved and generate
HTML redirects; this can be used on kernel.org (or any other site
hosting the rendered docs) to avoid breaking links.
- Automated processing of the YAML files describing the netlink
protocol.
- A significant update of the maintainer's PGP guide.
... and a seemingly endless series of typo fixes, build-problem fixes,
etc"
* tag 'docs-6.18' of git://git.lwn.net/linux: (193 commits)
Documentation/features: Update feature lists for 6.17-rc7
docs: remove cdomain.py
Documentation/process: submitting-patches: fix typo in "were do"
docs: dev-tools/lkmm: Fix typo of missing file extension
Documentation: trace: histogram: Convert ftrace docs cross-reference
Documentation: trace: histogram-design: Wrap introductory note in note:: directive
Documentation: trace: historgram-design: Separate sched_waking histogram section heading and the following diagram
Documentation: trace: histogram-design: Trim trailing vertices in diagram explanation text
Documentation: trace: histogram: Fix histogram trigger subsection number order
docs: driver-api: fix spelling of "buses".
Documentation: fbcon: Use admonition directives
Documentation: fbcon: Reindent 8th step of attach/detach/unload
Documentation: fbcon: Add boot options and attach/detach/unload section headings
docs: filesystems: sysfs: add remaining top level sysfs directory descriptions
docs: filesystems: sysfs: clarify symlink destinations in dev and bus/devices descriptions
docs: filesystems: sysfs: remove top level sysfs net directory
docs: maintainer: Fix ambiguous subheading formatting
docs: kdoc: a few more dump_typedef() tweaks
docs: kdoc: remove redundant comment stripping in dump_typedef()
docs: kdoc: remove some dead code in dump_typedef()
...
|
|
The current consumer documentation does not include bulk operations,
providing an example of how to acquire multiple regulators by calling
regulator_get() multiple times. That solution is valid and slightly
simpler for a small amount of regulators, but it does not scale well.
Document the bulk operations to get, enable and disable regulators.
Signed-off-by: Javier Carrasco <javier.carrasco.cruz@gmail.com>
Link: https://patch.msgid.link/20250819-reg_consumer_doc-v1-1-b631fc0d35a3@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Fix typos.
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Link: https://lore.kernel.org/r/20250813200526.290420-8-helgaas@kernel.org
|
|
Merge runtime PM updates and power capping updates for 6.17-rc1:
- Document return values of suspend-related API functions in the
runtime PM framework (Sakari Ailus)
- Mark last busy stamp in multiple autosuspend-related functions in the
runtime PM framework and update its documentation (Sakari Ailus)
- Take active children into account in pm_runtime_get_if_in_use() for
consistency (Rafael Wysocki)
- Fix NULL pointer dereference in get_pd_power_uw() in the dtpm_cpu
power capping driver (Sivan Zohar-Kotzer)
- Add support for the Bartlett Lake platform to the Intel RAPL power
capping driver (Qiao Wei)
- Add PL4 support for Panther Lake to the intel_rapl_msr power capping
driver (Zhang Rui)
* pm-runtime:
PM: runtime: Take active children into account in pm_runtime_get_if_in_use()
Documentation: PM: *_autosuspend() functions update last busy time
PM: runtime: Mark last busy stamp in pm_request_autosuspend()
PM: runtime: Mark last busy stamp in pm_runtime_autosuspend()
PM: runtime: Mark last busy stamp in pm_runtime_put_sync_autosuspend()
PM: runtime: Mark last busy stamp in pm_runtime_put_autosuspend()
PM: runtime: Document return values of suspend-related API functions
* pm-powercap:
powercap: dtpm_cpu: Fix NULL pointer dereference in get_pd_power_uw()
powercap: intel_rapl: Add support for Bartlett Lake platform
powercap: intel_rapl_msr: Add PL4 support for Panther Lake
|
|
cpu_latency_qos_add|remove_notifier() doesn't exist, hence let's drop
the documentation of them.
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Link: https://patch.msgid.link/20250710102656.127654-1-ulf.hansson@linaro.org
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Document that the *_autosuspend() variants of the Runtime PM functions
update the last busy timestamp.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://patch.msgid.link/20250616061212.2286741-7-sakari.ailus@linux.intel.com
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Set device's last busy timestamp to current time in
pm_request_autosuspend().
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://patch.msgid.link/20250616061212.2286741-6-sakari.ailus@linux.intel.com
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Set device's last busy timestamp to current time in
pm_runtime_autosuspend().
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://patch.msgid.link/20250616061212.2286741-5-sakari.ailus@linux.intel.com
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Set device's last busy timestamp to current time in
pm_runtime_put_sync_autosuspend().
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://patch.msgid.link/20250616061212.2286741-4-sakari.ailus@linux.intel.com
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Set device's last busy timestamp to current time in
pm_runtime_put_autosuspend(). Callers wishing not to do that will need to
use __pm_runtime_put_autosuspend().
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://patch.msgid.link/20250616061212.2286741-3-sakari.ailus@linux.intel.com
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Fix the API name to free the allocated table in the example driver code
that modifies the EM. Also fix the passing of correct table when
updating the cost.
Signed-off-by: Atul Kumar Pant <atulpant.linux@gmail.com>
Link: https://patch.msgid.link/20250511071141.13237-1-atulpant.linux@gmail.com
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Fixes a grammar issue ("than" -> "then") and changes "re-use" to
"reuse" for consistency with modern spelling.
Signed-off-by: Moon Hee Lee <moonhee.lee.ca@gmail.com>
Link: https://patch.msgid.link/20250506220057.5589-1-moonhee.lee.ca@gmail.com
[ rjw: Subject edits ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
pm_runtime_autosuspend() got accidentally renamed as
__pm_runtime_autosuspend() whereas the intention in the
patch was to rename pm_runtime_put_autosuspend() only.
Fix it.
Fixes: b7d46644e554 ("PM: runtime: Add pm_runtime_put_autosuspend() replacement")
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://patch.msgid.link/20250410153106.4146265-2-sakari.ailus@linux.intel.com
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Pull documentation fixes from Jonathan Corbet:
"Two fixes for footnote-related warnings that appeared with Sphinx 8.x.
We want to encourage use of newer Sphinx - they fixed a performance
problem and the docs build takes less than half the time it used to"
* tag 'docs-6.14-2' of git://git.lwn.net/linux:
docs: power: Fix footnote reference for Toshiba Satellite P10-554
Documentation: ublk: Drop Stefan Hajnoczi's message footnote
|
|
Sphinx reports unreferenced footnote warning on "Video issues with S3
resume" doc:
Documentation/power/video.rst:213: WARNING: Footnote [#] is not referenced. [ref.footnote]
Fix the warning by separating footnote reference for Toshiba Satellite
P10-554 by a space.
Fixes: 151f4e2bdc7a ("docs: power: convert docs to ReST and rename to *.rst")
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Closes: https://lore.kernel.org/linux-next/20250122170335.148a23b0@canb.auug.org.au/
Signed-off-by: Bagas Sanjaya <bagasdotme@gmail.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Link: https://lore.kernel.org/r/20250122143456.68867-4-bagasdotme@gmail.com
|
|
Update the documentation to match the behaviour of the code.
pm_runtime_resume_and_get() always returns 0 on success, even if
__pm_runtime_resume() returns 1.
Fixes: 2c412337cfe6 ("PM: runtime: Add documentation for pm_runtime_resume_and_get()")
Signed-off-by: Paul Barker <paul.barker.ct@bp.renesas.com>
Link: https://patch.msgid.link/20241203143729.478-1-paul.barker.ct@bp.renesas.com
[ rjw: Subject and changelog edits, adjusted new comment formatting ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
The Documentation refers to some deprecated macros.
Update those parts accordingly.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://patch.msgid.link/20240903172520.3568731-1-andriy.shevchenko@linux.intel.com
[ rjw: Changelog edit ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Add a helper function that allow regulator consumers to allow low-level
HW access, in order to enable/disable regulator in atomic context.
The use-case for RZ/G2L SoC is to enable VBUS selection register based
on vbus detection that happens in interrupt context.
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Link: https://patch.msgid.link/20240616105402.45211-4-biju.das.jz@bp.renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
platform_pci_wakeup_init() was removed by d2e5f0c16ad6 ("ACPI / PCI: Rework
the setup and cleanup of device wakeup") but was still mentioned in the
documentation.
Update the doc to refer to pci_acpi_setup(), which does the equivalent
work.
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Dhruva Gole <d-gole@ti.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Typos are bad. Fix them.
Signed-off-by: Saravana Kannan <saravanak@google.com>
Reviewed-by: Dhruva Gole <d-gole@ti.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Merge Enery Model changes for 6.9-rc1:
- Allow the Energy Model to be updated dynamically (Lukasz Luba).
* pm-em: (24 commits)
PM: EM: Fix nr_states warnings in static checks
Documentation: EM: Update with runtime modification design
PM: EM: Add em_dev_compute_costs()
PM: EM: Remove old table
PM: EM: Change debugfs configuration to use runtime EM table data
drivers/thermal/devfreq_cooling: Use new Energy Model interface
drivers/thermal/cpufreq_cooling: Use new Energy Model interface
powercap/dtpm_devfreq: Use new Energy Model interface to get table
powercap/dtpm_cpu: Use new Energy Model interface to get table
PM: EM: Optimize em_cpu_energy() and remove division
PM: EM: Support late CPUs booting and capacity adjustment
PM: EM: Add performance field to struct em_perf_state and optimize
PM: EM: Add em_perf_state_from_pd() to get performance states table
PM: EM: Introduce em_dev_update_perf_domain() for EM updates
PM: EM: Add functions for memory allocations for new EM tables
PM: EM: Use runtime modified EM for CPUs energy estimation in EAS
PM: EM: Introduce runtime modifiable table
PM: EM: Split the allocation and initialization of the EM table
PM: EM: Check if the get_cost() callback is present in em_compute_costs()
PM: EM: Introduce em_compute_costs()
...
|
|
Merge cpufreq changes for 6.9-rc1:
- Enable preferred core support in the amd-pstate cpufreq driver (Meng
Li).
- Fix min_perf assignment in amd_pstate_adjust_perf() and make the
min/max limit perf values in amd-pstate always stay within the
(highest perf, lowest perf) range (Tor Vic, Meng Li).
- Change default transition delay in cpufreq to 2ms (Qais Yousef).
- Drop long-unused cpudata::prev_cummulative_iowait from the
intel_pstate cpufreq driver (Jiri Slaby).
- Allow intel_pstate to assign model-specific values to strings used in
the EPP sysfs interface and make it do so on Meteor Lake (Srinivas
Pandruvada).
- Remove references to 10ms minimum sampling rate from comments in the
cpufreq code (Pierre Gondois).
- Prevent scaling_cur_freq from exceeding scaling_max_freq when the
latter is an inefficient frequency (Shivnandan Kumar).
- Honour transition_latency over transition_delay_us in cpufreq (Qais
Yousef).
- Stop unregistering cpufreq cooling on CPU hot-remove (Viresh Kumar).
- General enhancements / cleanups to ARM cpufreq drivers (tianyu2,
Nícolas F. R. A. Prado, Erick Archer, Arnd Bergmann, Anastasia
Belova).
- Update cpufreq-dt-platdev to block/approve devices (Richard Acayan).
- Make the SCMI cpufreq driver get a transition delay value from
firmware (Pierre Gondois).
* pm-cpufreq: (28 commits)
cpufreq: scmi: Set transition_delay_us
firmware: arm_scmi: Populate fast channel rate_limit
firmware: arm_scmi: Populate perf commands rate_limit
cpufreq: Don't unregister cpufreq cooling on CPU hotplug
cpufreq: Honour transition_latency over transition_delay_us
cpufreq: Limit resolving a frequency to policy min/max
cpufreq: amd-pstate: adjust min/max limit perf
cpufreq: Remove references to 10ms min sampling rate
cpufreq: intel_pstate: Update default EPPs for Meteor Lake
cpufreq: intel_pstate: Allow model specific EPPs
cpufreq: qcom-hw: add CONFIG_COMMON_CLK dependency
cpufreq: dt-platdev: block SDM670 in cpufreq-dt-platdev
cpufreq: intel_pstate: remove cpudata::prev_cummulative_iowait
cpufreq: Change default transition delay to 2ms
cpufreq: amd-pstate: Fix min_perf assignment in amd_pstate_adjust_perf()
Documentation: PM: amd-pstate: Fix section title underline
Documentation: introduce amd-pstate preferrd core mode kernel command line options
Documentation: amd-pstate: introduce amd-pstate preferred core
cpufreq: amd-pstate: Update amd-pstate preferred core ranking dynamically
ACPI: cpufreq: Add highest perf change notification
...
|
|
Merge changes related to the runtime power management of devices for
6.9-rc1:
- Simplify pm_runtime_get_if_active() usage and add a replacement for
pm_runtime_put_autosuspend() (Sakari Ailus).
- Add a tracepoint for runtime_status changes tracking (Vilas Bhat).
- Fix section title markdown in the runtime PM documentation (Yiwei
Lin).
* pm-runtime:
Documentation: PM: Fix runtime_pm.rst markdown syntax
PM: runtime: add tracepoint for runtime_status changes
PM: runtime: Add pm_runtime_put_autosuspend() replacement
PM: runtime: Simplify pm_runtime_get_if_active() usage
|
|
The '7. Generic subsystem callbacks' should be a section title, but
the markdown syntax is not adequate now.
Fix it so the chapter can be linked at docs.kernel.org correctly.
Signed-off-by: Yiwei Lin <s921975628@gmail.com>
[ rjw: Changelog edits ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
According to the context, 'pci_pm_suspend_noirq' is the right
word for the changed sentence.
Signed-off-by: Yiwei Lin <s921975628@gmail.com>
[ rjw: Subject edits ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Add __pm_runtime_put_autosuspend() that replaces
pm_runtime_put_autosuspend() for new users. The intent is to later
re-purpose pm_runtime_put_autosuspend() to also mark the device's last
busy stamp---which is what the vast majority of users actually need.
This is also described in pm_runtime_put_autosuspend() documentation.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
There are two ways to opportunistically increment a device's runtime PM
usage count, calling either pm_runtime_get_if_active() or
pm_runtime_get_if_in_use(). The former has an argument to tell whether to
ignore the usage count or not, and the latter simply calls the former with
ign_usage_count set to false. The other users that want to ignore the
usage_count will have to explicitly set that argument to true which is a
bit cumbersome.
To make this function more practical to use, remove the ign_usage_count
argument from the function. The main implementation is in a static
function called pm_runtime_get_conditional() and implementations of
pm_runtime_get_if_active() and pm_runtime_get_if_in_use() are moved to
runtime.c.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Alex Elder <elder@linaro.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Takashi Iwai <tiwai@suse.de> # sound/
Reviewed-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com> # drivers/accel/ivpu/
Acked-by: Rodrigo Vivi <rodrigo.vivi@intel.com> # drivers/gpu/drm/i915/
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Acked-by: Bjorn Helgaas <bhelgaas@google.com> # drivers/pci/
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Add a new description which covers the information about runtime EM.
It contains the design decisions, describes models and how they
reflect the reality. Remove description of the default EM. Add example
driver code which modifies EM. Add API documentation for the new feature
which allows to modify the EM in runtime.
Reviewed-by: Dietmar Eggemann <dietmar.eggemann@arm.com>
Tested-by: Dietmar Eggemann <dietmar.eggemann@arm.com>
Signed-off-by: Lukasz Luba <lukasz.luba@arm.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
As noted in the "Deprecated Interfaces, Language Features, Attributes,
and Conventions" documentation [1], size calculations (especially
multiplication) should not be performed in memory allocator (or similar)
function arguments due to the risk of them overflowing. This could lead
to values wrapping around and a smaller allocation being made than the
caller was expecting. Using those allocations could lead to linear
overflows of heap memory and other misbehaviors.
So, in the example code use the purpose specific kcalloc() function
instead of the argument size * count in the kzalloc() function.
At the same time, modify the translations accordingly.
Signed-off-by: Erick Archer <erick.archer@gmx.com>
Reviewed-by: Hu Haowen <2023002089@link.tyut.edu.cn>
Reviewed-by: Yanteng Si <siyanteng@loongson.cn>
Reviewed-by: Hu Haowen <2023002089@link.tyut.edu.cn>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
|
|
The core freezer logic has been modified by commit f5d39b020809
("freezer,sched: Rewrite core freezer logic"), so adjust the
documentation to reflect the new code. The main changes include:
- Drop references to PF_FROZEN and PF_FREEZER_SKIP
- Describe TASK_FROZEN, TASK_FREEZABLE and __TASK_FREEZABLE_UNSAFE
- Replace system_freezing_cnt with freezer_active
- Use a different example for the loop of a freezable kernel thread,
since the old code is gone gone
Signed-off-by: Kevin Hao <haokexin@gmail.com>
[ rjw: Subject and changelog edits, doc text adjustments ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Fix typos in Documentation.
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Link: https://lore.kernel.org/r/20230814212822.193684-4-helgaas@kernel.org
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
|
|
Removing an erroneous 'd' at the end of 'regulator_enable'.
Signed-off-by: Philippe De Muyter <phdm@macqel.be>
Cc: Liam Girdwood <lgirdwood@gmail.com>
Cc: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/1682537582-2314-1-git-send-email-Philippe.DeMuyter@macq.eu
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management updates from Rafael Wysocki:
"These add EPP support to the AMD P-state cpufreq driver, add support
for new platforms to the Intel RAPL power capping driver, intel_idle
and the Qualcomm cpufreq driver, enable thermal cooling for Tegra194,
drop the custom cpufreq driver for loongson1 that is not necessary any
more (and the corresponding cpufreq platform device), fix assorted
issues and clean up code.
Specifics:
- Add EPP support to the AMD P-state cpufreq driver (Perry Yuan, Wyes
Karny, Arnd Bergmann, Bagas Sanjaya)
- Drop the custom cpufreq driver for loongson1 that is not necessary
any more and the corresponding cpufreq platform device (Keguang
Zhang)
- Remove "select SRCU" from system sleep, cpufreq and OPP Kconfig
entries (Paul E. McKenney)
- Enable thermal cooling for Tegra194 (Yi-Wei Wang)
- Register module device table and add missing compatibles for
cpufreq-qcom-hw (Nícolas F. R. A. Prado, Abel Vesa and Luca Weiss)
- Various dt binding updates for qcom-cpufreq-nvmem and
opp-v2-kryo-cpu (Christian Marangi)
- Make kobj_type structure in the cpufreq core constant (Thomas
Weißschuh)
- Make cpufreq_unregister_driver() return void (Uwe Kleine-König)
- Make the TEO cpuidle governor check CPU utilization in order to
refine idle state selection (Kajetan Puchalski)
- Make Kconfig select the haltpoll cpuidle governor when the haltpoll
cpuidle driver is selected and replace a default_idle() call in
that driver with arch_cpu_idle() to allow MWAIT to be used (Li
RongQing)
- Add Emerald Rapids Xeon support to the intel_idle driver (Artem
Bityutskiy)
- Add ARCH_SUSPEND_POSSIBLE dependencies for ARMv4 cpuidle drivers to
avoid randconfig build failures (Arnd Bergmann)
- Make kobj_type structures used in the cpuidle sysfs interface
constant (Thomas Weißschuh)
- Make the cpuidle driver registration code update microsecond values
of idle state parameters in accordance with their nanosecond values
if they are provided (Rafael Wysocki)
- Make the PSCI cpuidle driver prevent topology CPUs from being
suspended on PREEMPT_RT (Krzysztof Kozlowski)
- Document that pm_runtime_force_suspend() cannot be used with
DPM_FLAG_SMART_SUSPEND (Richard Fitzgerald)
- Add EXPORT macros for exporting PM functions from drivers (Richard
Fitzgerald)
- Remove /** from non-kernel-doc comments in hibernation code (Randy
Dunlap)
- Fix possible name leak in powercap_register_zone() (Yang Yingliang)
- Add Meteor Lake and Emerald Rapids support to the intel_rapl power
capping driver (Zhang Rui)
- Modify the idle_inject power capping facility to support 100% idle
injection (Srinivas Pandruvada)
- Fix large time windows handling in the intel_rapl power capping
driver (Zhang Rui)
- Fix memory leaks with using debugfs_lookup() in the generic PM
domains and Energy Model code (Greg Kroah-Hartman)
- Add missing 'cache-unified' property in the example for kryo OPP
bindings (Rob Herring)
- Fix error checking in opp_migrate_dentry() (Qi Zheng)
- Let qcom,opp-fuse-level be a 2-long array for qcom SoCs (Konrad
Dybcio)
- Modify some power management utilities to use the canonical ftrace
path (Ross Zwisler)
- Correct spelling problems for Documentation/power/ as reported by
codespell (Randy Dunlap)"
* tag 'pm-6.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (53 commits)
Documentation: amd-pstate: disambiguate user space sections
cpufreq: amd-pstate: Fix invalid write to MSR_AMD_CPPC_REQ
dt-bindings: opp: opp-v2-kryo-cpu: enlarge opp-supported-hw maximum
dt-bindings: cpufreq: qcom-cpufreq-nvmem: make cpr bindings optional
dt-bindings: cpufreq: qcom-cpufreq-nvmem: specify supported opp tables
PM: Add EXPORT macros for exporting PM functions
cpuidle: psci: Do not suspend topology CPUs on PREEMPT_RT
MIPS: loongson32: Drop obsolete cpufreq platform device
powercap: intel_rapl: Fix handling for large time window
cpuidle: driver: Update microsecond values of state parameters as needed
cpuidle: sysfs: make kobj_type structures constant
cpuidle: add ARCH_SUSPEND_POSSIBLE dependencies
PM: EM: fix memory leak with using debugfs_lookup()
PM: domains: fix memory leak with using debugfs_lookup()
cpufreq: Make kobj_type structure constant
cpufreq: davinci: Fix clk use after free
cpufreq: amd-pstate: avoid uninitialized variable use
cpufreq: Make cpufreq_unregister_driver() return void
OPP: fix error checking in opp_migrate_dentry()
dt-bindings: cpufreq: cpufreq-qcom-hw: Add SM8550 compatible
...
|
|
This driver was used for a couple of Intel PXA and Samsung S3C24xx
based PDAs, but all of those are now removed from the kernel, so
the driver itself is no longer useful.
Cc: Anton Vorontsov <cbou@mail.ru>
Cc: linux-pm@vger.kernel.org
Acked-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Acked-by: Robert Jarzmik <robert.jarzmik@free.fr>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
Correct spelling problems for Documentation/power/ as reported
by codespell.
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Merge devfreq changes, PM QoS change, and power management tools and
documentation changes for v5.20-rc1:
- Add new devfreq driver for Mediatek CCI (Cache Coherent
Interconnect) (Johnson Wang).
- Convert the Samsung Exynos SoC Bus bindings to DT schema of
exynos-bus.c (Krzysztof Kozlowski).
- Address kernel-doc warnings by adding the description for unused
fucntion parameters in devfreq core (Mauro Carvalho Chehab).
- Use NULL to pass a null pointer rather than zero according to the
function propotype in imx-bus.c (Colin Ian King).
- Print error message instead of error interger value in
tegra30-devfreq.c (Dmitry Osipenko).
- Add checks to prevent setting negative frequency QoS limits for
CPUs (Shivnandan Kumar).
- Update the pm-graph suite of utilities to the latest revision 5.9
including multiple improvements (Todd Brandt).
- Drop pme_interrupt reference from the PCI power management
documentation (Mario Limonciello).
* pm-devfreq:
PM / devfreq: tegra30: Add error message for devm_devfreq_add_device()
PM / devfreq: imx-bus: use NULL to pass a null pointer rather than zero
PM / devfreq: shut up kernel-doc warnings
dt-bindings: interconnect: samsung,exynos-bus: convert to dtschema
PM / devfreq: mediatek: Introduce MediaTek CCI devfreq driver
dt-bindings: interconnect: Add MediaTek CCI dt-bindings
* pm-qos:
PM: QoS: Add check to make sure CPU freq is non-negative
* pm-tools:
pm-graph v5.9
* pm-docs:
Documentation: PM: Drop pme_interrupt reference
|
|
The EM now uses the micro-Watts scale for the power values. Update
related documentation to reflect that fact.
Fix also a problematic sentence in the doc "to:" which triggers test
scripts complaining about wrong email address.
Reviewed-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Signed-off-by: Lukasz Luba <lukasz.luba@arm.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
`pme_interrupt` was dropped from `struct pci_dev` as part of commit
8370c2dc4c7b ("PCI / PM: Drop pme_interrupt flag from struct pci_dev"),
but the Documentation still includes this member.
Remove it from the documentation as well and update it to have the missing
`pme_poll` member instead.
Fixes: 8370c2dc4c7b ("PCI / PM: Drop pme_interrupt flag from struct pci_dev")
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Add description about new artificial EM registration and use cases.
Update also the documentation with the new .get_cost() callback
description and usage.
Signed-off-by: Lukasz Luba <lukasz.luba@arm.com>
Reviewed-by: Ionela Voinescu <ionela.voinescu@arm.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
The .active_power() callback passes the device pointer when it's called.
Aligned with a convetion present in other subsystems and pass the 'dev'
as a first argument. It looks more cleaner.
Adjust all affected drivers which implement that API callback.
Suggested-by: Ionela Voinescu <ionela.voinescu@arm.com>
Signed-off-by: Lukasz Luba <lukasz.luba@arm.com>
Reviewed-by: Ionela Voinescu <ionela.voinescu@arm.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
The new registration method allows to get power values from the DT OPP
definition. The new OPP entry property "opp-microwatt" contains total
power expressed in micro-Watts. Align the EM documentation with this
new possible registration method of EM.
Signed-off-by: Lukasz Luba <lukasz.luba@arm.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
|
|
Merge an operating performance points (OPP) update, devfreq updates
and power capping updates for 5.17-rc1:
- Update outdated OPP documentation (Tang Yizhou).
- Reduce log severity for informative message regarding frequency
transition failures in devfreq (Tzung-Bi Shih).
- Add DRAM frequency controller devfreq driver for Allwinner sunXi
SoCs (Samuel Holland).
- Add missing COMMON_CLK dependency to the sun8i devfreq driver (Arnd
Bergmann).
- Add support for new layout of Psys PowerLimit Register on SPR to
the Intel RAPL power capping driver (Zhang Rui).
- Fix typo in a comment in idle_inject.c (Jason Wang).
- Remove unused function definition from the DTPM (Dynamit Thermal
Power Management) power capping framework (Daniel Lezcano).
- Reduce DTPM trace verbosity (Daniel Lezcano).
* pm-opp:
Documentation: power: Update outdated contents in opp.rst
* pm-devfreq:
PM / devfreq: Reduce log severity for informative message
PM / devfreq: sun8i: addd COMMON_CLK dependency
PM / devfreq: Add a driver for the sun8i/sun50i MBUS
* powercap:
powercap/drivers/dtpm: Reduce trace verbosity
powercap/drivers/dtpm: Remove unused function definition
powercap: fix typo in a comment in idle_inject.c
powercap: intel_rapl: support new layout of Psys PowerLimit Register on SPR
|
