| Age | Commit message (Collapse) | Author |
|---|
|
Pull SoC devicetree updates from Arnd Bergmann:
"Three new SoCs got added in existing arm64 chip families:
- Renesas R-Car X5H (R8A78000) is a new generation of automotive
SoCs, based on 16 Cortex-A720 (Armv9.2) cores, which makes the the
currently highest-perforance embedded SoC.
- TI AM62L is a new variant of the AM62 family of industrial SoCs,
this one comes without a GPU.
- Qualcomm MSM8937 (Snapdragon 430) is an older mobile phone chip
based on Cortex-A53, and closely related to MSM8917 (Snapdragn
425), which we already support.
In addition, there are a good number of newly supported machines
across SoC families:
- Two Aspeed AST2600 (Cortex-A7) based BMC setups for large servers
- Mobile Phones and tables based on Mediatek MT6582, Nvidia Tegra124,
Qualcomm MSM8937 and Qualcomm MSM8939,
- Two Laptops based on Qualcomm SoCs: one using the older sdm850, the
other using x1p42100.
- One Router based on Rockchips RK3568
- 24 variants of the Enclustra Mercury system-on-module, all based on
32-bit Intel/Altera SocFPGA chips, plus two boards using 64-bit
SocFPGA Agilex chips..
- 30 industrial/embedded boards and single-board computers, using
various chips from NXP, Rockchips, Mediatek, TI, Amlogic, Qualcomm,
Spacemit, and Starfive.
In total there are 783 commits here, the majority of these improving
hardware support and cleaning up devicetree files across the tree,
with the majority of the changes going into the Qualcomm, NXP, Renesas
and Rockchips platforms"
* tag 'soc-dt-6.19' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (782 commits)
arm64: dts: mediatek: mt8195: Fix address range for JPEG decoder core 1
ARM: dts: samsung: exynos4412-midas: turn off SDIO WLAN chip during system suspend
ARM: dts: samsung: exynos4210-trats: turn off SDIO WLAN chip during system suspend
ARM: dts: samsung: exynos4210-i9100: turn off SDIO WLAN chip during system suspend
ARM: dts: samsung: universal_c210: turn off SDIO WLAN chip during system suspend
arm64: dts: amlogic: meson-g12b: Fix L2 cache reference for S922X CPUs
arm64: dts: Add gpio_intc node for Amlogic S7D SoCs
arm64: dts: Add gpio_intc node for Amlogic S7 SoCs
arm64: dts: Add gpio_intc node for Amlogic S6 SoCs
arm64: dts: amlogic: s7d: add ao secure node
arm64: dts: amlogic: s7: add ao secure node
arm64: dts: amlogic: s6: add ao secure node
arm64: dts: amlogic: Fix the register name of the 'DBI' region
dts: arm64: amlogic: add a5 pinctrl node
arm64: dts: amlogic: s7d: add power domain controller node
arm64: dts: amlogic: s7: add power domain controller node
arm64: dts: amlogic: s6: add power domain controller node
dts: arm64: amlogic: Add ISP related nodes for C3
arm64: dts: meson: add initial device-tree for Tanix TX9 Pro
dt-bindings: arm: amlogic: add support for Tanix TX9 Pro
...
|
|
Make SoM .dtsi SoC-agnostic by moving SoC include to board level
imx6qdl-var-som.dtsi currently includes imx6q.dtsi, which makes this SoM
description Quad/Dual specific and prevents reuse from i.MX6DL boards.
Changes:
- Move imx6q.dtsi include from imx6qdl-var-som.dtsi to
imx6q-var-mx6customboard.dts.
- Remove /dts-v1/; from imx6qdl-var-som.dtsi (dtsi files should not declare
version)
This keeps the SoM .dtsi SoC-agnostic (it already relies on imx6qdl.dtsi for
family-common parts) and allows boards using the DualLite or Solo to include
imx6dl.dtsi instead.
Why this is needed:
To reuse imx6qdl-var-som.dtsi on i.MX6DL board.
No functional changes for imx6q-var-mx6customboard are intended.
Signed-off-by: Stefan Prisacariu <stefan.prisacariu@prevas.dk>
Link: https://lore.kernel.org/all/20250925104942.4148376-1-stefan.prisacariu@prevas.dk/
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
Describe the RGB LED indicator according to the reality - it is a single
part containing all the three R,G and B LEDs in one package.
With this description the chan-name property becomes useless, remove it.
Signed-off-by: Michal Vokáč <michal.vokac@ysoft.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
Lynx, Pegasus and Pegasus+ boards have a speaker connected to the PWM3.
Enable a pwm-beeper on these boards so the system can produce simple
sounds.
Signed-off-by: Michal Vokáč <michal.vokac@ysoft.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
Add the EPD PMIC for the e70k02 based devices as a step towards full EPD
support.
Acked-by: Alistair Francis <alistair@alistair23.me>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Andreas Kemnade <akemnade@kernel.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
Add support for I2S audio on Amarula rmm board. Audio codec
TLV320AIC3X is connected as slave to SAIF0, which provides
bitclock, frame and MCLK.
Co-developed-by: Michael Trimarchi <michael@amarulasolutions.com>
Signed-off-by: Michael Trimarchi <michael@amarulasolutions.com>
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
The i.MX6UL reference manual lists two possible interrupt lines for
SAI3 (56 and 57, offset +32). The current device tree entry uses
the first one (24), which prevents IRQs from being handled properly.
Use the second interrupt line (25), which does allow interrupts
to work as expected.
Fixes: 36e2edf6ac07 ("ARM: dts: imx6ul: add sai support")
Signed-off-by: Maarten Zanders <maarten@zanders.be>
Cc: stable@vger.kernel.org
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
Add vdd-supply and vddio-supply for fsl,mpl3115 to fix below CHECK_DTBS
warnings:
arch/arm/boot/dts/nxp/imx/imx53-ppd.dtb: pressure-sensor@60 (fsl,mpl3115): 'vdd-supply' is a required property
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
i.MX7ULP pinctrl don't support bias-pull-up property. So remove it to fix
below CHECK_DTBS warnings:
arch/arm/boot/dts/nxp/imx/imx7ulp-evk.dtb: pinctrl@40ac0000 (fsl,imx7ulp-iomuxc1): lpuart4grp: 'bias-pull-up' does not match any of the regexes: '^pinctrl-[0-9]+$'
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
Remove undocumented clock-names for ov5642 to fix below CHECK_DTBS warnings:
arch/arm/boot/dts/nxp/imx/imx6q-sabresd.dtb: camera@3c (ovti,ov5642): 'clock-names' does not match any of the regexes: '^pinctrl-[0-9]+$'
from schema $id: http://devicetree.org/schemas/media/i2c/ovti,ov5642.yaml#
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
Add device_type for memory node to fix below CHECK_DTB warnings:
arch/arm/boot/dts/nxp/imx/imx6dl-b105pv2.dtb: / (ge,imx6dl-b105pv2): memory@10000000: 'device_type' is a required property
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
Add bus type for parallel ov5640 to fix below CHECK_DTBS warnings:
arch/arm/boot/dts/nxp/imx/imx6q-sabrelite.dtb: camera@42 (ovti,ov5642): port:endpoint:hsync-active: False schema does not allow 1
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
Add supplies for wm8731 to fix below CHECK_DTB warnings:
arch/arm/boot/dts/nxp/imx/imx6q-cm-fx6.dtb: codec@1a (wlf,wm8731): 'AVDD-supply' is a required property
from schema $id: http://devicetree.org/schemas/sound/wlf,wm8731.yaml#
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
Fix typo interrupt, which should be 'interrupts'. Fix below CHECK_DTBS
warnings.
arch/arm/boot/dts/nxp/imx/imx6dl-skov-revc-lt2.dtb: switch@0 (microchip,ksz8873): Unevaluated properties are not allowed ('interrupt', 'pinctrl-names' were unexpected)
from schema $id: http://devicetree.org/schemas/net/dsa/microchip,ksz.yaml
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
Remove redundant linux,phandle to fix below CHECK_DTBS warnings:
arch/arm/boot/dts/nxp/imx/imx6dl-gw560x.dtb: pmic@3c (lltc,ltc3676): regulators:sw3: Unevaluated properties are not allowed ('linux,phandle' was unexpected)
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
Rename power-supply to vcc-supply for touchscreen to fix below CHECK_DTB
warnings:
arch/arm/boot/dts/nxp/imx/imx6ull-dhcom-pdk2.dtb: touchscreen@38 (edt,edt-ft5406): Unevaluated properties are not allowed ('power-supply' was unexpected)
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
Add power-supply for lcd panel to fix below CHECK_DTBS warnings:
arch/arm/boot/dts/nxp/imx/imx6q-evi.dtb: panel (sharp,lq101k1ly04): 'power-supply' is a required property
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
Rename i2c<n>mux to i2c to fix below CHECK_DTBS warnings:
arch/arm/boot/dts/nxp/imx/imx6q-nitrogen6_max.dtb: i2c2mux (i2c-mux-gpio): $nodename:0: 'i2c2mux' does not match '^(i2c-?)?mux'
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
Remove extra space in " jedec,spi-nor" to fix below CHECK_DTBS warnings:
arch/arm/boot/dts/nxp/imx/imx6ull-phytec-tauri-emmc.dtb: /soc/bus@2000000/spba-bus@2000000/spi@2008000/flash@2: failed to match any schema with compatible: [' jedec,spi-nor']
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
Add device_type, bus-range, ranges for pci nodes. Rename intel,i211 to
ethernet to fix below CHECK_DTBS warnings:
arch/arm/boot/dts/nxp/imx/imx6q-utilite-pro.dtb: pcie@0,0: 'device_type' is a required property
from schema $id: http://devicetree.org/schemas/pci/pci-bus-common.yaml#
arch/arm/boot/dts/nxp/imx/imx6q-utilite-pro.dtb: pcie@0,0: 'ranges' is a required property
from schema $id: http://devicetree.org/schemas/pci/pci-bus-common.yaml
arm/boot/dts/nxp/imx/imx6q-utilite-pro.dtb: pcie@0,0: 'intel,i211@pcie0,0' does not match any of the regexes: '.*-names$', '.*-supply$', '^#.*-cells$', '^#[a-zA-Z0-9,+\\-._]{0,63}$', '^[a-zA-Z0-9][a-zA-Z0-9#,+\\-._]{0,63}$', '^[a-zA-Z0-9][a-zA-Z0-9,+\\-._]{0,63}@[0-9a-fA-F]+(,[0-9a-fA-F]+)*$', '^__.*__$', 'pinctrl-[0-9]+'
from schema $id: http://devicetree.org/schemas/dt-core.yaml
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
Rename ir_recv to ir-receiver to fix below CHECK_DTBS warnings:
arm/boot/dts/nxp/imx/imx6q-tbs2910.dtb: ir_recv (gpio-ir-receiver): $nodename:0: 'ir_recv' does not match '^ir(-receiver)?(@[a-f0-9]+)?$'
from schema $id: http://devicetree.org/schemas/media/gpio-ir-receiver.yaml
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
Remove redundant pinctrl-name since pinctrl-0 doesn't exist to fix below
CHECK_DTBS warnings:
arch/arm/boot/dts/nxp/imx/imx6q-pistachio.dtb: pinctrl@20e0000 (fsl,imx6q-iomuxc): 'pinctrl-0' is a dependency of 'pinctrl-names'
from schema $id: http://devicetree.org/schemas/pinctrl/pinctrl-consumer.yaml
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
Change voltage-divider's io-channel-cells to 1 to fix below CHECK_DTBS
warnings:
arch/arm/boot/dts/nxp/imx/imx6dl-plym2m.dtb: voltage-divider-vaccu (voltage-divider): #io-channel-cells: 1 was expected
from schema $id: http://devicetree.org/schemas/iio/afe/voltage-divider.yaml
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
Remove gpio suffix for regulator to fix below CHECK_DTBS warnings:
(fsl,imx6sx-sdb): regulator-pcie-gpio: {'compatible': ['regulator-fixed'], 'phandle': 69} is not of type 'array'
from schema $id: http://devicetree.org/schemas/gpio/gpio-consumer.yaml
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
Rename ngpio to ngpios to fix below CHECK_DTBS warnings:
arch/arm/boot/dts/nxp/imx/imx6dl-ts4900.dtb: gpio@28 (technologic,ts4900-gpio): 'ngpio' does not match any of the regexes: '^(hog-[0-9]+|.+-hog(-[0-9]+)?)$', '^pinctrl-[0-9]+$'
from schema $id: http://devicetree.org/schemas/trivial-gpio.yaml
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
rename m95m02 to eeprom to fix below CHECK_DTBS warnings:
arch/arm/boot/dts/nxp/imx/imx6q-evi.dtb: m95m02@1 (st,m95m02): $nodename: 'anyOf' conditional failed, one must be fixed:
'm95m02@1' does not match '^eeprom@[0-9a-f]{1,2}$'
'm95m02@1' does not match '^fram@[0-9a-f]{1,2}$'
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
Rename touch-thermal0 to touch-0-thermal to fix below CHECK_DTBS warnings:
arch/arm/boot/dts/nxp/imx/imx6dl-plym2m.dtb: thermal-zones: 'touch-thermal0', 'touch-thermal1' do not match any of the regexes: '^[a-zA-Z][a-zA-Z0-9\\-]{1,10}-thermal$', 'pinctrl-[0-9]+'
from schema $id: http://devicetree.org/schemas/thermal/thermal-zones.yaml
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
Rename stmpgpio to gpio and add gpio-controller and interrupt-controller.
Rename stmpe_adc to adc. Move interrupt-controller and gpio-controller
under gpio node.
to fix below CHECK_DTBS warnings:
/home/lizhi/source/linux-upstream-pci/arch/arm/boot/dts/nxp/imx/imx6q-dmo-edmqmx6.dtb: stmpe1601@40 (st,stmpe1601): gpio: 'interrupt-controller' is a required property
from schema $id: http://devicetree.org/schemas/mfd/st,stmpe.yaml#
/home/lizhi/source/linux-upstream-pci/arch/arm/boot/dts/nxp/imx/imx6q-dmo-edmqmx6.dtb: gpio (st,stmpe-gpio): 'interrupt-controller' is a required property
from schema $id: http://devicetree.org/schemas/gpio/st,stmpe-gpio.yaml#
/home/lizhi/source/linux-upstream-pci/arch/arm/boot/dts/nxp/imx/imx6q-dmo-edmqmx6.dtb: stmpe1601@44 (st,stmpe1601): gpio: 'interrupt-controller' is a required property
from schema $id: http://devicetree.org/schemas/mfd/st,stmpe.yaml#
/home/lizhi/source/linux-upstream-pci/arch/arm/boot/dts/nxp/imx/imx6q-dmo-edmqmx6.dtb: gpio (st,stmpe-gpio): 'interrupt-controller' is a required property
from schema $id: http://devicetree.org/schemas/gpio/st,stmpe-gpio.yaml#
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
The RTC inside mc34708 is supported by RTC_DRV_MC13XXX since v3.6-rc1.
Enable the PMIC RTC on the imx53-qsrb. Without a battery the RTC may be
powered via the micro-USB connector when main 5V power is not available.
Signed-off-by: Alexander Kurz <akurz@blala.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
The correct compatible is nxp,pcf2123
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
Rename the 'ssi2' and 'aud3' nodes to 'mux-ssi2' and 'mux-aud3' in the
audmux configuration of imx51-zii-rdu1.dts to comply with the naming
convention in imx-audmux.yaml.
This fixes the following dt-schema warning:
imx51-zii-rdu1.dtb: audmux@83fd0000 (fsl,imx51-audmux): 'aud3', 'ssi2'
do not match any of the regexes: '^mux-[0-9a-z]*$', '^pinctrl-[0-9]+$'
Fixes: ceef0396f367f ("ARM: dts: imx: add ZII RDU1 board")
Signed-off-by: Jihed Chaibi <jihed.chaibi.dev@gmail.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
The 'report-rate-hz' property for the edt-ft5x06 driver was added and
handled in the Linux kernel by me with patches [1] and [2] for this
specific board.
The v1 upstream version, which was the one applied to the customer's
kernel, used the 'report-rate' property, which was written directly to
the controller register. During review, the 'hz' suffix was added,
changing its handling so that writing the value directly to the register
was no longer possible for the M06 controller.
Once the patches were accepted in mainline, I did not reapply them to
the customer's kernel, and when upstreaming the DTS for this board, I
forgot to correct the 'report-rate-hz' property value.
The property must be set to 60 because this board uses the M06 controller,
which expects the report rate in units of 10 Hz, meaning the actual value
written to the register is 6.
[1] 625f829586ea ("dt-bindings: input: touchscreen: edt-ft5x06: add report-rate-hz")
[2] 5bcee83a406c ("Input: edt-ft5x06 - set report rate by dts property")
Fixes: ffea3cac94ba ("ARM: dts: imx6ul: support Engicam MicroGEA RMM board")
Co-developed-by: Michael Trimarchi <michael@amarulasolutions.com>
Signed-off-by: Michael Trimarchi <michael@amarulasolutions.com>
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
Replace verbatim license text with a `SPDX-License-Identifier`.
The comment header mis-attributes this license to be "X11", but the
license text does not include the last line "Except as contained in this
notice, the name of the X Consortium shall not be used in advertising or
otherwise to promote the sale, use or other dealings in this Software
without prior written authorization from the X Consortium.". Therefore,
this license is actually equivalent to the SPDX "MIT" license (confirmed
by text diffing).
Cc: Andrej Rosano <andrej@inversepath.com>
Signed-off-by: Bence Csókás <csokas.bence@prolan.hu>
Acked-by: Andrej Rosano <andrej.rosano@reversec.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into soc/dt
i.MX ARM device tree changes for 6.18:
- A series from Alexander Stein to clean up the most of dt-schema warnings
for LS1021A
- A couple of changes from Bence Csókás to replace license text comment
with SPDX identifier for imx6-display5 and imx6-aristainetos2 board
- A couple of vfxxx dt-schema cleanups from Fabio Estevam
- A bunch of changes from Frank Li to clean up dt-schema warnings on
various platforms, VF610, LS1021A, i.MX6, etc.
- Minor whitespace cleanup on i.MX8ULL from Krzysztof Kozlowski
- An imx6ulz-bsh-smm-m2 workaround from Wolfgang Birkner to get resume
via console work
* tag 'imx-dt-6.18' of https://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: (44 commits)
ARM: dts: imx6sll: Use 'dma-names'
ARM: dts: imx6: change rtc compatible string to st,m41t00 from m41t00
ARM: dts: imx6: remove undefined linux,default-trigger source
ARM: dts: imx6ul-pico: add power-supply for vxt,vl050-8048nt-c01
ARM: dts: imx6ul-14x14-evk: add regulator for ov5640
ARM: dts: imx6: replace isl,isl12022 with isil,isl12022 for RTC
ARM: dts: imx6: replace gpio-key with gpio-keys compatible string
ARM: dts: imx6: rename i2c<n>mux i2c-mux-<n>
ARM: dts: imx6: rename node name flash to eeprom
ARM: dts: imx6: rename node i2c-gpio to i2c.
ARM: dts: imx6: rename touch screen's node name to touchscreen
ARM: dts: imx6: remove redundant pinctrl-names
ARM: dts: imx6qdl-aristainetos2: rename ethernet-phy to ethernet-phy@0
ARM: dts: imx6: add interrupt-cells for dlg,da9063 pmic
ARM: dts: imx6: align rtc chip node name to 'rtc'
ARM: dts: imx6: add key- prefix for gpio-keys
ARM: dts: imx6: add #address-cells for gsc@20
ARM: dts: imx6ul-tx6ul: Switch away from deprecated `phy-reset-gpios`
ARM: dts: mba6ul: Add MicIn routing
ARM: dts: ls1021a-tsn: Remove redundant #address-cells for ethernet-switch@1
...
Link: https://lore.kernel.org/r/20250915132535.253859-2-shawnguo2@yeah.net
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
'dma-name' is not a valid property and causes the following dt-schema
warning:
dma-name: b'rx\x00tx\x00' is not of type 'object', 'integer', 'array', 'boolean', 'null'
Fix it by using 'dma-names' instead.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
m41t00 compatible is not existing. Change it to st,m41t00 to fix below
CHECK_DTBS warnings:
arch/arm/boot/dts/nxp/imx/imx6dl-ts7970.dtb: /soc/bus@2100000/i2c@21a0000/rtc@68: failed to match any schema with compatible: ['m41t00']
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
Set gpio/off to none for linux,default-trigger.
Fix below CHECK_DTBS warnings:
arch/arm/boot/dts/nxp/imx/imx6dl-phytec-mira-rdk-nand.dtb: user-leds (gpio-leds): user-led1:linux,default-trigger: 'oneOf' conditional failed, one must be fixed:
'gpio' is not one of ['backlight', 'default-on', 'heartbeat', 'disk-activity', 'disk-read', 'disk-write', 'timer', 'pattern', 'audio-micmute', 'audio-mute', 'bluetooth-power', 'flash', 'kbd-capslock', 'mtd', 'nand-disk', 'netdev', 'none', 'rc-feedback', 'torch', 'usb-gadget', 'usb-host', 'usbport']
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
Add power-supply for vxt,vl050-8048nt-c01 to fix below CHECK_DTBS warnings:
arch/arm/boot/dts/nxp/imx/imx6ul-pico-dwarf.dtb: panel (vxt,vl050-8048nt-c01): 'power-supply' is a required property
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
Add required power supply for ov5640.
Fix below CHECK_DTBS warnings:
arch/arm/boot/dts/nxp/imx/imx6ul-14x14-evk.dtb: camera@3c (ovti,ov5640): 'AVDD-supply' is a required property
from schema $id: http://devicetree.org/schemas/media/i2c/ovti,ov5640.yaml#
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
The compatible string isl,isl12022 is typo, it should be isil,isl12022.
Fix below CHECK_DTBS warning:
arch/arm/boot/dts/nxp/imx/imx6dl-ts7970.dtb: /soc/bus@2100000/i2c@21a0000/rtc@6f: failed to match any schema with compatible: ['isl,isl12022']
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
Compatible string 'gpio-key' is not existed. Correct it to 'gpio-keys'.
Fix below CHECK_DTBS warnings
arch/arm/boot/dts/nxp/imx/imx6ul-phytec-segin-ff-rdk-emmc.dtb: /gpio-keys: failed to match any schema with compatible: ['gpio-key']
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
Rename i2c<n>mux i2c-mux-<n> to fix below CHECK_DTBS warnings:
arch/arm/boot/dts/nxp/imx/imx6q-nitrogen6_max.dtb: i2c2mux (i2c-mux-gpio): $nodename:0: 'i2c2mux' does not match '^(i2c-?)?mux'
from schema $id: http://devicetree.org/schemas/i2c/i2c-mux-gpio.yaml
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
Rename node name flash to eeprom to fix below CHECK_DTBS warnings:
arch/arm/boot/dts/nxp/imx/imx6q-b450v3.dtb: flash@0 (atmel,at25): $nodename: 'anyOf' conditional failed, one must be fixed:
'flash@0' does not match '^eeprom@[0-9a-f]{1,2}$'
'flash@0' does not match '^fram@[0-9a-f]{1,2}$'
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
Rename node name i2c-gpio to i2c to fix below CHECK_DTBS warnings:
arch/arm/boot/dts/nxp/imx/imx6ul-tx6ul-0010.dtb: / (karo,imx6ul-tx6ul): i2c-gpio: {'compatible': ['i2c-gpio'], '#address-cells': 1, '#size-cells': 0, 'pinctrl-names': ['default'], 'pinctrl-0': [[68]], 'sda-gpios': [[46, 1, 0]], 'scl-gpios': [[46, 0, 0]], 'clock-frequency': 400000, 'status': ['okay'], 'rtc@68': {'compatible': ['dallas,ds1339'], 'reg': [[104]], 'status': ['disabled']}} is not of type 'array'
from schema $id: http://devicetree.org/schemas/gpio/gpio-consumer.yaml#
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
Rename touch to touchscreen.
Rename stmpe_touchscreen to touchscreen.
Rename stmpe_adc to adc.
Fix below CHECK_DTBS warning:
arch/arm/boot/dts/nxp/imx/imx7d-nitrogen7.dtb: touch@48 (ti,tsc2004): 'wakeup-gpios' does not match any of the regexes: '^pinctrl-[0-9]+$'
from schema $id: http://devicetree.org/schemas/input/touchscreen/ti,tsc2005.yaml#
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
Remove redundant pinctrl-name because no pinctrl-0 existed to fix below
CHECK_DTBS warnings:
arch/arm/boot/dts/nxp/imx/imx6dl-hummingboard.dtb: pwm@2084000 (fsl,imx6q-pwm): 'pinctrl-0' is a dependency of 'pinctrl-names'
from schema $id: http://devicetree.org/schemas/pinctrl/pinctrl-consumer.yaml#
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
Rename ethernet-phy to ethernet-phy@0 to fix below CHECK_DTB warnings:
arch/arm/boot/dts/nxp/imx/imx6dl-aristainetos2_4.dtb: ethernet@2188000 (fsl,imx6q-fec): mdio: Unevaluated properties are not allowed ('ethernet-phy' was unexpected)
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
Add interrupt-cells for pmic to fix below CHECK_DTBS warnings:
arm/boot/dts/nxp/imx/imx6dl-emcon-avari.dtb: pmic@58 (dlg,da9063): 'interrupt-controller' is a required property
from schema $id: http://devicetree.org/schemas/mfd/dlg,da9063.yaml
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
Rename node name ds1672 to rtc to fix below CHECK_DTB warning:
arch/arm/boot/dts/nxp/imx/imx6dl-gw51xx.dtb: ds1672@68 (dallas,ds1672): $nodename:0: 'ds1672@68' does not match '^rtc(@.*|-([0-9]|[1-9][0-9]+))?$
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
Add key- prefix for gpio-keys and rename button_0 to button-0 to fix below
CHECK_DTB warning:
arch/arm/boot/dts/nxp/imx/imx6q-gw51xx.dtb: gpio-keys (gpio-keys): 'eeprom-wp', ... do not match any of the regexes: '^(button|...))$', 'pinctrl-[0-9]+
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
