| Age | Commit message (Collapse) | Author |
|---|
|
Pull KVM updates from Paolo Bonzini:
"ARM:
- Support for userspace handling of synchronous external aborts
(SEAs), allowing the VMM to potentially handle the abort in a
non-fatal manner
- Large rework of the VGIC's list register handling with the goal of
supporting more active/pending IRQs than available list registers
in hardware. In addition, the VGIC now supports EOImode==1 style
deactivations for IRQs which may occur on a separate vCPU than the
one that acked the IRQ
- Support for FEAT_XNX (user / privileged execute permissions) and
FEAT_HAF (hardware update to the Access Flag) in the software page
table walkers and shadow MMU
- Allow page table destruction to reschedule, fixing long
need_resched latencies observed when destroying a large VM
- Minor fixes to KVM and selftests
Loongarch:
- Get VM PMU capability from HW GCFG register
- Add AVEC basic support
- Use 64-bit register definition for EIOINTC
- Add KVM timer test cases for tools/selftests
RISC/V:
- SBI message passing (MPXY) support for KVM guest
- Give a new, more specific error subcode for the case when in-kernel
AIA virtualization fails to allocate IMSIC VS-file
- Support KVM_DIRTY_LOG_INITIALLY_SET, enabling dirty log gradually
in small chunks
- Fix guest page fault within HLV* instructions
- Flush VS-stage TLB after VCPU migration for Andes cores
s390:
- Always allocate ESCA (Extended System Control Area), instead of
starting with the basic SCA and converting to ESCA with the
addition of the 65th vCPU. The price is increased number of exits
(and worse performance) on z10 and earlier processor; ESCA was
introduced by z114/z196 in 2010
- VIRT_XFER_TO_GUEST_WORK support
- Operation exception forwarding support
- Cleanups
x86:
- Skip the costly "zap all SPTEs" on an MMIO generation wrap if MMIO
SPTE caching is disabled, as there can't be any relevant SPTEs to
zap
- Relocate a misplaced export
- Fix an async #PF bug where KVM would clear the completion queue
when the guest transitioned in and out of paging mode, e.g. when
handling an SMI and then returning to paged mode via RSM
- Leave KVM's user-return notifier registered even when disabling
virtualization, as long as kvm.ko is loaded. On reboot/shutdown,
keeping the notifier registered is ok; the kernel does not use the
MSRs and the callback will run cleanly and restore host MSRs if the
CPU manages to return to userspace before the system goes down
- Use the checked version of {get,put}_user()
- Fix a long-lurking bug where KVM's lack of catch-up logic for
periodic APIC timers can result in a hard lockup in the host
- Revert the periodic kvmclock sync logic now that KVM doesn't use a
clocksource that's subject to NTP corrections
- Clean up KVM's handling of MMIO Stale Data and L1TF, and bury the
latter behind CONFIG_CPU_MITIGATIONS
- Context switch XCR0, XSS, and PKRU outside of the entry/exit fast
path; the only reason they were handled in the fast path was to
paper of a bug in the core #MC code, and that has long since been
fixed
- Add emulator support for AVX MOV instructions, to play nice with
emulated devices whose guest drivers like to access PCI BARs with
large multi-byte instructions
x86 (AMD):
- Fix a few missing "VMCB dirty" bugs
- Fix the worst of KVM's lack of EFER.LMSLE emulation
- Add AVIC support for addressing 4k vCPUs in x2AVIC mode
- Fix incorrect handling of selective CR0 writes when checking
intercepts during emulation of L2 instructions
- Fix a currently-benign bug where KVM would clobber SPEC_CTRL[63:32]
on VMRUN and #VMEXIT
- Fix a bug where KVM corrupt the guest code stream when re-injecting
a soft interrupt if the guest patched the underlying code after the
VM-Exit, e.g. when Linux patches code with a temporary INT3
- Add KVM_X86_SNP_POLICY_BITS to advertise supported SNP policy bits
to userspace, and extend KVM "support" to all policy bits that
don't require any actual support from KVM
x86 (Intel):
- Use the root role from kvm_mmu_page to construct EPTPs instead of
the current vCPU state, partly as worthwhile cleanup, but mostly to
pave the way for tracking per-root TLB flushes, and elide EPT
flushes on pCPU migration if the root is clean from a previous
flush
- Add a few missing nested consistency checks
- Rip out support for doing "early" consistency checks via hardware
as the functionality hasn't been used in years and is no longer
useful in general; replace it with an off-by-default module param
to WARN if hardware fails a check that KVM does not perform
- Fix a currently-benign bug where KVM would drop the guest's
SPEC_CTRL[63:32] on VM-Enter
- Misc cleanups
- Overhaul the TDX code to address systemic races where KVM (acting
on behalf of userspace) could inadvertantly trigger lock contention
in the TDX-Module; KVM was either working around these in weird,
ugly ways, or was simply oblivious to them (though even Yan's
devilish selftests could only break individual VMs, not the host
kernel)
- Fix a bug where KVM could corrupt a vCPU's cpu_list when freeing a
TDX vCPU, if creating said vCPU failed partway through
- Fix a few sparse warnings (bad annotation, 0 != NULL)
- Use struct_size() to simplify copying TDX capabilities to userspace
- Fix a bug where TDX would effectively corrupt user-return MSR
values if the TDX Module rejects VP.ENTER and thus doesn't clobber
host MSRs as expected
Selftests:
- Fix a math goof in mmu_stress_test when running on a single-CPU
system/VM
- Forcefully override ARCH from x86_64 to x86 to play nice with
specifying ARCH=x86_64 on the command line
- Extend a bunch of nested VMX to validate nested SVM as well
- Add support for LA57 in the core VM_MODE_xxx macro, and add a test
to verify KVM can save/restore nested VMX state when L1 is using
5-level paging, but L2 is not
- Clean up the guest paging code in anticipation of sharing the core
logic for nested EPT and nested NPT
guest_memfd:
- Add NUMA mempolicy support for guest_memfd, and clean up a variety
of rough edges in guest_memfd along the way
- Define a CLASS to automatically handle get+put when grabbing a
guest_memfd from a memslot to make it harder to leak references
- Enhance KVM selftests to make it easer to develop and debug
selftests like those added for guest_memfd NUMA support, e.g. where
test and/or KVM bugs often result in hard-to-debug SIGBUS errors
- Misc cleanups
Generic:
- Use the recently-added WQ_PERCPU when creating the per-CPU
workqueue for irqfd cleanup
- Fix a goof in the dirty ring documentation
- Fix choice of target for directed yield across different calls to
kvm_vcpu_on_spin(); the function was always starting from the first
vCPU instead of continuing the round-robin search"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (260 commits)
KVM: arm64: at: Update AF on software walk only if VM has FEAT_HAFDBS
KVM: arm64: at: Use correct HA bit in TCR_EL2 when regime is EL2
KVM: arm64: Document KVM_PGTABLE_PROT_{UX,PX}
KVM: arm64: Fix spelling mistake "Unexpeced" -> "Unexpected"
KVM: arm64: Add break to default case in kvm_pgtable_stage2_pte_prot()
KVM: arm64: Add endian casting to kvm_swap_s[12]_desc()
KVM: arm64: Fix compilation when CONFIG_ARM64_USE_LSE_ATOMICS=n
KVM: arm64: selftests: Add test for AT emulation
KVM: arm64: nv: Expose hardware access flag management to NV guests
KVM: arm64: nv: Implement HW access flag management in stage-2 SW PTW
KVM: arm64: Implement HW access flag management in stage-1 SW PTW
KVM: arm64: Propagate PTW errors up to AT emulation
KVM: arm64: Add helper for swapping guest descriptor
KVM: arm64: nv: Use pgtable definitions in stage-2 walk
KVM: arm64: Handle endianness in read helper for emulated PTW
KVM: arm64: nv: Stop passing vCPU through void ptr in S2 PTW
KVM: arm64: Call helper for reading descriptors directly
KVM: arm64: nv: Advertise support for FEAT_XNX
KVM: arm64: Teach ptdump about FEAT_XNX permissions
KVM: s390: Use generic VIRT_XFER_TO_GUEST_WORK functions
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull persistent dentry infrastructure and conversion from Al Viro:
"Some filesystems use a kinda-sorta controlled dentry refcount leak to
pin dentries of created objects in dcache (and undo it when removing
those). A reference is grabbed and not released, but it's not actually
_stored_ anywhere.
That works, but it's hard to follow and verify; among other things, we
have no way to tell _which_ of the increments is intended to be an
unpaired one. Worse, on removal we need to decide whether the
reference had already been dropped, which can be non-trivial if that
removal is on umount and we need to figure out if this dentry is
pinned due to e.g. unlink() not done. Usually that is handled by using
kill_litter_super() as ->kill_sb(), but there are open-coded special
cases of the same (consider e.g. /proc/self).
Things get simpler if we introduce a new dentry flag
(DCACHE_PERSISTENT) marking those "leaked" dentries. Having it set
claims responsibility for +1 in refcount.
The end result this series is aiming for:
- get these unbalanced dget() and dput() replaced with new primitives
that would, in addition to adjusting refcount, set and clear
persistency flag.
- instead of having kill_litter_super() mess with removing the
remaining "leaked" references (e.g. for all tmpfs files that hadn't
been removed prior to umount), have the regular
shrink_dcache_for_umount() strip DCACHE_PERSISTENT of all dentries,
dropping the corresponding reference if it had been set. After that
kill_litter_super() becomes an equivalent of kill_anon_super().
Doing that in a single step is not feasible - it would affect too many
places in too many filesystems. It has to be split into a series.
This work has really started early in 2024; quite a few preliminary
pieces have already gone into mainline. This chunk is finally getting
to the meat of that stuff - infrastructure and most of the conversions
to it.
Some pieces are still sitting in the local branches, but the bulk of
that stuff is here"
* tag 'pull-persistency' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (54 commits)
d_make_discardable(): warn if given a non-persistent dentry
kill securityfs_recursive_remove()
convert securityfs
get rid of kill_litter_super()
convert rust_binderfs
convert nfsctl
convert rpc_pipefs
convert hypfs
hypfs: swich hypfs_create_u64() to returning int
hypfs: switch hypfs_create_str() to returning int
hypfs: don't pin dentries twice
convert gadgetfs
gadgetfs: switch to simple_remove_by_name()
convert functionfs
functionfs: switch to simple_remove_by_name()
functionfs: fix the open/removal races
functionfs: need to cancel ->reset_work in ->kill_sb()
functionfs: don't bother with ffs->ref in ffs_data_{opened,closed}()
functionfs: don't abuse ffs_data_closed() on fs shutdown
convert selinuxfs
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull MM updates from Andrew Morton:
"__vmalloc()/kvmalloc() and no-block support" (Uladzislau Rezki)
Rework the vmalloc() code to support non-blocking allocations
(GFP_ATOIC, GFP_NOWAIT)
"ksm: fix exec/fork inheritance" (xu xin)
Fix a rare case where the KSM MMF_VM_MERGE_ANY prctl state is not
inherited across fork/exec
"mm/zswap: misc cleanup of code and documentations" (SeongJae Park)
Some light maintenance work on the zswap code
"mm/page_owner: add debugfs files 'show_handles' and 'show_stacks_handles'" (Mauricio Faria de Oliveira)
Enhance the /sys/kernel/debug/page_owner debug feature by adding
unique identifiers to differentiate the various stack traces so
that userspace monitoring tools can better match stack traces over
time
"mm/page_alloc: pcp->batch cleanups" (Joshua Hahn)
Minor alterations to the page allocator's per-cpu-pages feature
"Improve UFFDIO_MOVE scalability by removing anon_vma lock" (Lokesh Gidra)
Address a scalability issue in userfaultfd's UFFDIO_MOVE operation
"kasan: cleanups for kasan_enabled() checks" (Sabyrzhan Tasbolatov)
"drivers/base/node: fold node register and unregister functions" (Donet Tom)
Clean up the NUMA node handling code a little
"mm: some optimizations for prot numa" (Kefeng Wang)
Cleanups and small optimizations to the NUMA allocation hinting
code
"mm/page_alloc: Batch callers of free_pcppages_bulk" (Joshua Hahn)
Address long lock hold times at boot on large machines. These were
causing (harmless) softlockup warnings
"optimize the logic for handling dirty file folios during reclaim" (Baolin Wang)
Remove some now-unnecessary work from page reclaim
"mm/damon: allow DAMOS auto-tuned for per-memcg per-node memory usage" (SeongJae Park)
Enhance the DAMOS auto-tuning feature
"mm/damon: fixes for address alignment issues in DAMON_LRU_SORT and DAMON_RECLAIM" (Quanmin Yan)
Fix DAMON_LRU_SORT and DAMON_RECLAIM with certain userspace
configuration
"expand mmap_prepare functionality, port more users" (Lorenzo Stoakes)
Enhance the new(ish) file_operations.mmap_prepare() method and port
additional callsites from the old ->mmap() over to ->mmap_prepare()
"Fix stale IOTLB entries for kernel address space" (Lu Baolu)
Fix a bug (and possible security issue on non-x86) in the IOMMU
code. In some situations the IOMMU could be left hanging onto a
stale kernel pagetable entry
"mm/huge_memory: cleanup __split_unmapped_folio()" (Wei Yang)
Clean up and optimize the folio splitting code
"mm, swap: misc cleanup and bugfix" (Kairui Song)
Some cleanups and a minor fix in the swap discard code
"mm/damon: misc documentation fixups" (SeongJae Park)
"mm/damon: support pin-point targets removal" (SeongJae Park)
Permit userspace to remove a specific monitoring target in the
middle of the current targets list
"mm: MISC follow-up patches for linux/pgalloc.h" (Harry Yoo)
A couple of cleanups related to mm header file inclusion
"mm/swapfile.c: select swap devices of default priority round robin" (Baoquan He)
improve the selection of swap devices for NUMA machines
"mm: Convert memory block states (MEM_*) macros to enums" (Israel Batista)
Change the memory block labels from macros to enums so they will
appear in kernel debug info
"ksm: perform a range-walk to jump over holes in break_ksm" (Pedro Demarchi Gomes)
Address an inefficiency when KSM unmerges an address range
"mm/damon/tests: fix memory bugs in kunit tests" (SeongJae Park)
Fix leaks and unhandled malloc() failures in DAMON userspace unit
tests
"some cleanups for pageout()" (Baolin Wang)
Clean up a couple of minor things in the page scanner's
writeback-for-eviction code
"mm/hugetlb: refactor sysfs/sysctl interfaces" (Hui Zhu)
Move hugetlb's sysfs/sysctl handling code into a new file
"introduce VM_MAYBE_GUARD and make it sticky" (Lorenzo Stoakes)
Make the VMA guard regions available in /proc/pid/smaps and
improves the mergeability of guarded VMAs
"mm: perform guard region install/remove under VMA lock" (Lorenzo Stoakes)
Reduce mmap lock contention for callers performing VMA guard region
operations
"vma_start_write_killable" (Matthew Wilcox)
Start work on permitting applications to be killed when they are
waiting on a read_lock on the VMA lock
"mm/damon/tests: add more tests for online parameters commit" (SeongJae Park)
Add additional userspace testing of DAMON's "commit" feature
"mm/damon: misc cleanups" (SeongJae Park)
"make VM_SOFTDIRTY a sticky VMA flag" (Lorenzo Stoakes)
Address the possible loss of a VMA's VM_SOFTDIRTY flag when that
VMA is merged with another
"mm: support device-private THP" (Balbir Singh)
Introduce support for Transparent Huge Page (THP) migration in zone
device-private memory
"Optimize folio split in memory failure" (Zi Yan)
"mm/huge_memory: Define split_type and consolidate split support checks" (Wei Yang)
Some more cleanups in the folio splitting code
"mm: remove is_swap_[pte, pmd]() + non-swap entries, introduce leaf entries" (Lorenzo Stoakes)
Clean up our handling of pagetable leaf entries by introducing the
concept of 'software leaf entries', of type softleaf_t
"reparent the THP split queue" (Muchun Song)
Reparent the THP split queue to its parent memcg. This is in
preparation for addressing the long-standing "dying memcg" problem,
wherein dead memcg's linger for too long, consuming memory
resources
"unify PMD scan results and remove redundant cleanup" (Wei Yang)
A little cleanup in the hugepage collapse code
"zram: introduce writeback bio batching" (Sergey Senozhatsky)
Improve zram writeback efficiency by introducing batched bio
writeback support
"memcg: cleanup the memcg stats interfaces" (Shakeel Butt)
Clean up our handling of the interrupt safety of some memcg stats
"make vmalloc gfp flags usage more apparent" (Vishal Moola)
Clean up vmalloc's handling of incoming GFP flags
"mm: Add soft-dirty and uffd-wp support for RISC-V" (Chunyan Zhang)
Teach soft dirty and userfaultfd write protect tracking to use
RISC-V's Svrsw60t59b extension
"mm: swap: small fixes and comment cleanups" (Youngjun Park)
Fix a small bug and clean up some of the swap code
"initial work on making VMA flags a bitmap" (Lorenzo Stoakes)
Start work on converting the vma struct's flags to a bitmap, so we
stop running out of them, especially on 32-bit
"mm/swapfile: fix and cleanup swap list iterations" (Youngjun Park)
Address a possible bug in the swap discard code and clean things
up a little
[ This merge also reverts commit ebb9aeb980e5 ("vfio/nvgrace-gpu:
register device memory for poison handling") because it looks
broken to me, I've asked for clarification - Linus ]
* tag 'mm-stable-2025-12-03-21-26' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (321 commits)
mm: fix vma_start_write_killable() signal handling
mm/swapfile: use plist_for_each_entry in __folio_throttle_swaprate
mm/swapfile: fix list iteration when next node is removed during discard
fs/proc/task_mmu.c: fix make_uffd_wp_huge_pte() huge pte handling
mm/kfence: add reboot notifier to disable KFENCE on shutdown
memcg: remove inc/dec_lruvec_kmem_state helpers
selftests/mm/uffd: initialize char variable to Null
mm: fix DEBUG_RODATA_TEST indentation in Kconfig
mm: introduce VMA flags bitmap type
tools/testing/vma: eliminate dependency on vma->__vm_flags
mm: simplify and rename mm flags function for clarity
mm: declare VMA flags by bit
zram: fix a spelling mistake
mm/page_alloc: optimize lowmem_reserve max lookup using its semantic monotonicity
mm/vmscan: skip increasing kswapd_failures when reclaim was boosted
pagemap: update BUDDY flag documentation
mm: swap: remove scan_swap_map_slots() references from comments
mm: swap: change swap_alloc_slow() to void
mm, swap: remove redundant comment for read_swap_cache_async
mm, swap: use SWP_SOLIDSTATE to determine if swap is rotational
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next
Pull bpf updates from Alexei Starovoitov:
- Convert selftests/bpf/test_tc_edt and test_tc_tunnel from .sh to
test_progs runner (Alexis Lothoré)
- Convert selftests/bpf/test_xsk to test_progs runner (Bastien
Curutchet)
- Replace bpf memory allocator with kmalloc_nolock() in
bpf_local_storage (Amery Hung), and in bpf streams and range tree
(Puranjay Mohan)
- Introduce support for indirect jumps in BPF verifier and x86 JIT
(Anton Protopopov) and arm64 JIT (Puranjay Mohan)
- Remove runqslower bpf tool (Hoyeon Lee)
- Fix corner cases in the verifier to close several syzbot reports
(Eduard Zingerman, KaFai Wan)
- Several improvements in deadlock detection in rqspinlock (Kumar
Kartikeya Dwivedi)
- Implement "jmp" mode for BPF trampoline and corresponding
DYNAMIC_FTRACE_WITH_JMP. It improves "fexit" program type performance
from 80 M/s to 136 M/s. With Steven's Ack. (Menglong Dong)
- Add ability to test non-linear skbs in BPF_PROG_TEST_RUN (Paul
Chaignon)
- Do not let BPF_PROG_TEST_RUN emit invalid GSO types to stack (Daniel
Borkmann)
- Generalize buildid reader into bpf_dynptr (Mykyta Yatsenko)
- Optimize bpf_map_update_elem() for map-in-map types (Ritesh
Oedayrajsingh Varma)
- Introduce overwrite mode for BPF ring buffer (Xu Kuohai)
* tag 'bpf-next-6.19' of git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (169 commits)
bpf: optimize bpf_map_update_elem() for map-in-map types
bpf: make kprobe_multi_link_prog_run always_inline
selftests/bpf: do not hardcode target rate in test_tc_edt BPF program
selftests/bpf: remove test_tc_edt.sh
selftests/bpf: integrate test_tc_edt into test_progs
selftests/bpf: rename test_tc_edt.bpf.c section to expose program type
selftests/bpf: Add success stats to rqspinlock stress test
rqspinlock: Precede non-head waiter queueing with AA check
rqspinlock: Disable spinning for trylock fallback
rqspinlock: Use trylock fallback when per-CPU rqnode is busy
rqspinlock: Perform AA checks immediately
rqspinlock: Enclose lock/unlock within lock entry acquisitions
bpf: Remove runqslower tool
selftests/bpf: Remove usage of lsm/file_alloc_security in selftest
bpf: Disable file_alloc_security hook
bpf: check for insn arrays in check_ptr_alignment
bpf: force BPF_F_RDONLY_PROG on insn array creation
bpf: Fix exclusive map memory leak
selftests/bpf: Make CS length configurable for rqspinlock stress test
selftests/bpf: Add lock wait time stats to rqspinlock stress test
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6
Pull crypto updates from Herbert Xu:
"API:
- Rewrite memcpy_sglist from scratch
- Add on-stack AEAD request allocation
- Fix partial block processing in ahash
Algorithms:
- Remove ansi_cprng
- Remove tcrypt tests for poly1305
- Fix EINPROGRESS processing in authenc
- Fix double-free in zstd
Drivers:
- Use drbg ctr helper when reseeding xilinx-trng
- Add support for PCI device 0x115A to ccp
- Add support of paes in caam
- Add support for aes-xts in dthev2
Others:
- Use likely in rhashtable lookup
- Fix lockdep false-positive in padata by removing a helper"
* tag 'v6.19-p1' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (71 commits)
crypto: zstd - fix double-free in per-CPU stream cleanup
crypto: ahash - Zero positive err value in ahash_update_finish
crypto: ahash - Fix crypto_ahash_import with partial block data
crypto: lib/mpi - use min() instead of min_t()
crypto: ccp - use min() instead of min_t()
hwrng: core - use min3() instead of nested min_t()
crypto: aesni - ctr_crypt() use min() instead of min_t()
crypto: drbg - Delete unused ctx from struct sdesc
crypto: testmgr - Add missing DES weak and semi-weak key tests
Revert "crypto: scatterwalk - Move skcipher walk and use it for memcpy_sglist"
crypto: scatterwalk - Fix memcpy_sglist() to always succeed
crypto: iaa - Request to add Kanchana P Sridhar to Maintainers.
crypto: tcrypt - Remove unused poly1305 support
crypto: ansi_cprng - Remove unused ansi_cprng algorithm
crypto: asymmetric_keys - fix uninitialized pointers with free attribute
KEYS: Avoid -Wflex-array-member-not-at-end warning
crypto: ccree - Correctly handle return of sg_nents_for_len
crypto: starfive - Correctly handle return of sg_nents_for_len
crypto: iaa - Fix incorrect return value in save_iaa_wq()
crypto: zstd - Remove unnecessary size_t cast
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ebiggers/linux
Pull crypto library updates from Eric Biggers:
"This is the main crypto library pull request for 6.19. It includes:
- Add SHA-3 support to lib/crypto/, including support for both the
hash functions and the extendable-output functions. Reimplement the
existing SHA-3 crypto_shash support on top of the library.
This is motivated mainly by the upcoming support for the ML-DSA
signature algorithm, which needs the SHAKE128 and SHAKE256
functions. But even on its own it's a useful cleanup.
This also fixes the longstanding issue where the
architecture-optimized SHA-3 code was disabled by default.
- Add BLAKE2b support to lib/crypto/, and reimplement the existing
BLAKE2b crypto_shash support on top of the library.
This is motivated mainly by btrfs, which supports BLAKE2b
checksums. With this change, all btrfs checksum algorithms now have
library APIs. btrfs is planned to start just using the library
directly.
This refactor also improves consistency between the BLAKE2b code
and BLAKE2s code. And as usual, it also fixes the issue where the
architecture-optimized BLAKE2b code was disabled by default.
- Add POLYVAL support to lib/crypto/, replacing the existing POLYVAL
support in crypto_shash. Reimplement HCTR2 on top of the library.
This simplifies the code and improves HCTR2 performance. As usual,
it also makes the architecture-optimized code be enabled by
default. The generic implementation of POLYVAL is greatly improved
as well.
- Clean up the BLAKE2s code
- Add FIPS self-tests for SHA-1, SHA-2, and SHA-3"
* tag 'libcrypto-updates-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiggers/linux: (37 commits)
fscrypt: Drop obsolete recommendation to enable optimized POLYVAL
crypto: polyval - Remove the polyval crypto_shash
crypto: hctr2 - Convert to use POLYVAL library
lib/crypto: x86/polyval: Migrate optimized code into library
lib/crypto: arm64/polyval: Migrate optimized code into library
lib/crypto: polyval: Add POLYVAL library
crypto: polyval - Rename conflicting functions
lib/crypto: x86/blake2s: Use vpternlogd for 3-input XORs
lib/crypto: x86/blake2s: Avoid writing back unchanged 'f' value
lib/crypto: x86/blake2s: Improve readability
lib/crypto: x86/blake2s: Use local labels for data
lib/crypto: x86/blake2s: Drop check for nblocks == 0
lib/crypto: x86/blake2s: Fix 32-bit arg treated as 64-bit
lib/crypto: arm, arm64: Drop filenames from file comments
lib/crypto: arm/blake2s: Fix some comments
crypto: s390/sha3 - Remove superseded SHA-3 code
crypto: sha3 - Reimplement using library API
crypto: jitterentropy - Use default sha3 implementation
lib/crypto: s390/sha3: Add optimized one-shot SHA-3 digest functions
lib/crypto: sha3: Support arch overrides of one-shot digest functions
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
Pull s390 updates from Heiko Carstens:
- Provide a new interface for dynamic configuration and deconfiguration
of hotplug memory, allowing with and without memmap_on_memory
support. This makes the way memory hotplug is handled on s390 much
more similar to other architectures
- Remove compat support. There shouldn't be any compat user space
around anymore, therefore get rid of a lot of code which also doesn't
need to be tested anymore
- Add stackprotector support. GCC 16 will get new compiler options,
which allow to generate code required for kernel stackprotector
support
- Merge pai_crypto and pai_ext PMU drivers into a new driver. This
removes a lot of duplicated code. The new driver is also extendable
and allows to support new PMUs
- Add driver override support for AP queues
- Rework and extend zcrypt and AP trace events to allow for tracing of
crypto requests
- Support block sizes larger than 65535 bytes for CCW tape devices
- Since the rework of the virtual kernel address space the module area
and the kernel image are within the same 4GB area. This eliminates
the need of weak per cpu variables. Get rid of
ARCH_MODULE_NEEDS_WEAK_PER_CPU
- Various other small improvements and fixes
* tag 's390-6.19-1' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: (92 commits)
watchdog: diag288_wdt: Remove KMSG_COMPONENT macro
s390/entry: Use lay instead of aghik
s390/vdso: Get rid of -m64 flag handling
s390/vdso: Rename vdso64 to vdso
s390: Rename head64.S to head.S
s390/vdso: Use common STABS_DEBUG and DWARF_DEBUG macros
s390: Add stackprotector support
s390/modules: Simplify module_finalize() slightly
s390: Remove KMSG_COMPONENT macro
s390/percpu: Get rid of ARCH_MODULE_NEEDS_WEAK_PER_CPU
s390/ap: Restrict driver_override versus apmask and aqmask use
s390/ap: Rename mutex ap_perms_mutex to ap_attr_mutex
s390/ap: Support driver_override for AP queue devices
s390/ap: Use all-bits-one apmask/aqmask for vfio in_use() checks
s390/debug: Update description of resize operation
s390/syscalls: Switch to generic system call table generation
s390/syscalls: Remove system call table pointer from thread_struct
s390/uapi: Remove 31 bit support from uapi header files
s390: Remove compat support
tools: Remove s390 compat support
...
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/kvms390/linux into HEAD
- SCA rework
- VIRT_XFER_TO_GUEST_WORK support
- Operation exception forwarding support
- Cleanups
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull scoped user access updates from Thomas Gleixner:
"Scoped user mode access and related changes:
- Implement the missing u64 user access function on ARM when
CONFIG_CPU_SPECTRE=n.
This makes it possible to access a 64bit value in generic code with
[unsafe_]get_user(). All other architectures and ARM variants
provide the relevant accessors already.
- Ensure that ASM GOTO jump label usage in the user mode access
helpers always goes through a local C scope label indirection
inside the helpers.
This is required because compilers are not supporting that a ASM
GOTO target leaves a auto cleanup scope. GCC silently fails to emit
the cleanup invocation and CLANG fails the build.
[ Editor's note: gcc-16 will have fixed the code generation issue
in commit f68fe3ddda4 ("eh: Invoke cleanups/destructors in asm
goto jumps [PR122835]"). But we obviously have to deal with clang
and older versions of gcc, so.. - Linus ]
This provides generic wrapper macros and the conversion of affected
architecture code to use them.
- Scoped user mode access with auto cleanup
Access to user mode memory can be required in hot code paths, but
if it has to be done with user controlled pointers, the access is
shielded with a speculation barrier, so that the CPU cannot
speculate around the address range check. Those speculation
barriers impact performance quite significantly.
This cost can be avoided by "masking" the provided pointer so it is
guaranteed to be in the valid user memory access range and
otherwise to point to a guaranteed unpopulated address space. This
has to be done without branches so it creates an address dependency
for the access, which the CPU cannot speculate ahead.
This results in repeating and error prone programming patterns:
if (can_do_masked_user_access())
from = masked_user_read_access_begin((from));
else if (!user_read_access_begin(from, sizeof(*from)))
return -EFAULT;
unsafe_get_user(val, from, Efault);
user_read_access_end();
return 0;
Efault:
user_read_access_end();
return -EFAULT;
which can be replaced with scopes and automatic cleanup:
scoped_user_read_access(from, Efault)
unsafe_get_user(val, from, Efault);
return 0;
Efault:
return -EFAULT;
- Convert code which implements the above pattern over to
scope_user.*.access(). This also corrects a couple of imbalanced
masked_*_begin() instances which are harmless on most
architectures, but prevent PowerPC from implementing the masking
optimization.
- Add a missing speculation barrier in copy_from_user_iter()"
* tag 'core-uaccess-2025-11-30' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
lib/strn*,uaccess: Use masked_user_{read/write}_access_begin when required
scm: Convert put_cmsg() to scoped user access
iov_iter: Add missing speculation barrier to copy_from_user_iter()
iov_iter: Convert copy_from_user_iter() to masked user access
select: Convert to scoped user access
x86/futex: Convert to scoped user access
futex: Convert to get/put_user_inline()
uaccess: Provide put/get_user_inline()
uaccess: Provide scoped user access regions
arm64: uaccess: Use unsafe wrappers for ASM GOTO
s390/uaccess: Use unsafe wrappers for ASM GOTO
riscv/uaccess: Use unsafe wrappers for ASM GOTO
powerpc/uaccess: Use unsafe wrappers for ASM GOTO
x86/uaccess: Use unsafe wrappers for ASM GOTO
uaccess: Provide ASM GOTO safe wrappers for unsafe_*_user()
ARM: uaccess: Implement missing __get_user_asm_dword()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull bug handling infrastructure updates from Ingo Molnar:
"Core updates:
- Improve WARN(), which has vararg printf like arguments, to work
with the x86 #UD based WARN-optimizing infrastructure by hiding the
format in the bug_table and replacing this first argument with the
address of the bug-table entry, while making the actual function
that's called a UD1 instruction (Peter Zijlstra)
- Introduce the CONFIG_DEBUG_BUGVERBOSE_DETAILED Kconfig switch (Ingo
Molnar, s390 support by Heiko Carstens)
Fixes and cleanups:
- bugs/s390: Remove private WARN_ON() implementation (Heiko Carstens)
- <asm/bugs.h>: Make i386 use GENERIC_BUG_RELATIVE_POINTERS (Peter
Zijlstra)"
* tag 'core-bugs-2025-12-01' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (31 commits)
x86/bugs: Make i386 use GENERIC_BUG_RELATIVE_POINTERS
x86/bug: Fix BUG_FORMAT vs KASLR
x86_64/bug: Inline the UD1
x86/bug: Implement WARN_ONCE()
x86_64/bug: Implement __WARN_printf()
x86/bug: Use BUG_FORMAT for DEBUG_BUGVERBOSE_DETAILED
x86/bug: Add BUG_FORMAT basics
bug: Allow architectures to provide __WARN_printf()
bug: Implement WARN_ON() using __WARN_FLAGS()
bug: Add report_bug_entry()
bug: Add BUG_FORMAT_ARGS infrastructure
bug: Clean up CONFIG_GENERIC_BUG_RELATIVE_POINTERS
bug: Add BUG_FORMAT infrastructure
x86: Rework __bug_table helpers
bugs/s390: Remove private WARN_ON() implementation
bugs/core: Reorganize fields in the first line of WARNING output, add ->comm[] output
bugs/sh: Concatenate 'cond_str' with '__FILE__' in __WARN_FLAGS(), to extend WARN_ON/BUG_ON output
bugs/parisc: Concatenate 'cond_str' with '__FILE__' in __WARN_FLAGS(), to extend WARN_ON/BUG_ON output
bugs/riscv: Concatenate 'cond_str' with '__FILE__' in __BUG_FLAGS(), to extend WARN_ON/BUG_ON output
bugs/riscv: Pass in 'cond_str' to __BUG_FLAGS()
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull scheduler updates from Ingo Molnar:
"Scalability and load-balancing improvements:
- Enable scheduler feature NEXT_BUDDY (Mel Gorman)
- Reimplement NEXT_BUDDY to align with EEVDF goals (Mel Gorman)
- Skip sched_balance_running cmpxchg when balance is not due (Tim
Chen)
- Implement generic code for architecture specific sched domain NUMA
distances (Tim Chen)
- Optimize the NUMA distances of the sched-domains builds of Intel
Granite Rapids (GNR) and Clearwater Forest (CWF) platforms (Tim
Chen)
- Implement proportional newidle balance: a randomized algorithm that
runs newidle balancing proportional to its success rate. (Peter
Zijlstra)
Scheduler infrastructure changes:
- Implement the 'sched_change' scoped_guard() pattern for the entire
scheduler (Peter Zijlstra)
- More broadly utilize the sched_change guard (Peter Zijlstra)
- Add support to pick functions to take runqueue-flags (Joel
Fernandes)
- Provide and use set_need_resched_current() (Peter Zijlstra)
Fair scheduling enhancements:
- Forfeit vruntime on yield (Fernand Sieber)
- Only update stats for allowed CPUs when looking for dst group (Adam
Li)
CPU-core scheduling enhancements:
- Optimize core cookie matching check (Fernand Sieber)
Deadline scheduler fixes:
- Only set free_cpus for online runqueues (Doug Berger)
- Fix dl_server time accounting (Peter Zijlstra)
- Fix dl_server stop condition (Peter Zijlstra)
Proxy scheduling fixes:
- Yield the donor task (Fernand Sieber)
Fixes and cleanups:
- Fix do_set_cpus_allowed() locking (Peter Zijlstra)
- Fix migrate_disable_switch() locking (Peter Zijlstra)
- Remove double update_rq_clock() in __set_cpus_allowed_ptr_locked()
(Hao Jia)
- Increase sched_tick_remote timeout (Phil Auld)
- sched/deadline: Use cpumask_weight_and() in dl_bw_cpus() (Shrikanth
Hegde)
- sched/deadline: Clean up select_task_rq_dl() (Shrikanth Hegde)"
* tag 'sched-core-2025-12-01' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (44 commits)
sched: Provide and use set_need_resched_current()
sched/fair: Proportional newidle balance
sched/fair: Small cleanup to update_newidle_cost()
sched/fair: Small cleanup to sched_balance_newidle()
sched/fair: Revert max_newidle_lb_cost bump
sched/fair: Reimplement NEXT_BUDDY to align with EEVDF goals
sched/fair: Enable scheduler feature NEXT_BUDDY
sched: Increase sched_tick_remote timeout
sched/fair: Have SD_SERIALIZE affect newidle balancing
sched/fair: Skip sched_balance_running cmpxchg when balance is not due
sched/deadline: Minor cleanup in select_task_rq_dl()
sched/deadline: Use cpumask_weight_and() in dl_bw_cpus
sched/deadline: Document dl_server
sched/deadline: Fix dl_server stop condition
sched/deadline: Fix dl_server time accounting
sched/core: Remove double update_rq_clock() in __set_cpus_allowed_ptr_locked()
sched/eevdf: Fix min_vruntime vs avg_vruntime
sched/core: Add comment explaining force-idle vruntime snapshots
sched/core: Optimize core cookie matching check
sched/proxy: Yield the donor task
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull objtool updates from Ingo Molnar:
- klp-build livepatch module generation (Josh Poimboeuf)
Introduce new objtool features and a klp-build script to generate
livepatch modules using a source .patch as input.
This builds on concepts from the longstanding out-of-tree kpatch
project which began in 2012 and has been used for many years to
generate livepatch modules for production kernels. However, this is a
complete rewrite which incorporates hard-earned lessons from 12+
years of maintaining kpatch.
Key improvements compared to kpatch-build:
- Integrated with objtool: Leverages objtool's existing control-flow
graph analysis to help detect changed functions.
- Works on vmlinux.o: Supports late-linked objects, making it
compatible with LTO, IBT, and similar.
- Simplified code base: ~3k fewer lines of code.
- Upstream: No more out-of-tree #ifdef hacks, far less cruft.
- Cleaner internals: Vastly simplified logic for
symbol/section/reloc inclusion and special section extraction.
- Robust __LINE__ macro handling: Avoids false positive binary diffs
caused by the __LINE__ macro by introducing a fix-patch-lines
script which injects #line directives into the source .patch to
preserve the original line numbers at compile time.
- Disassemble code with libopcodes instead of running objdump
(Alexandre Chartre)
- Disassemble support (-d option to objtool) by Alexandre Chartre,
which supports the decoding of various Linux kernel code generation
specials such as alternatives:
17ef: sched_balance_find_dst_group+0x62f mov 0x34(%r9),%edx
17f3: sched_balance_find_dst_group+0x633 | <alternative.17f3> | X86_FEATURE_POPCNT
17f3: sched_balance_find_dst_group+0x633 | call 0x17f8 <__sw_hweight64> | popcnt %rdi,%rax
17f8: sched_balance_find_dst_group+0x638 cmp %eax,%edx
... jump table alternatives:
1895: sched_use_asym_prio+0x5 test $0x8,%ch
1898: sched_use_asym_prio+0x8 je 0x18a9 <sched_use_asym_prio+0x19>
189a: sched_use_asym_prio+0xa | <jump_table.189a> | JUMP
189a: sched_use_asym_prio+0xa | jmp 0x18ae <sched_use_asym_prio+0x1e> | nop2
189c: sched_use_asym_prio+0xc mov $0x1,%eax
18a1: sched_use_asym_prio+0x11 and $0x80,%ecx
... exception table alternatives:
native_read_msr:
5b80: native_read_msr+0x0 mov %edi,%ecx
5b82: native_read_msr+0x2 | <ex_table.5b82> | EXCEPTION
5b82: native_read_msr+0x2 | rdmsr | resume at 0x5b84 <native_read_msr+0x4>
5b84: native_read_msr+0x4 shl $0x20,%rdx
.... x86 feature flag decoding (also see the X86_FEATURE_POPCNT
example in sched_balance_find_dst_group() above):
2faaf: start_thread_common.constprop.0+0x1f jne 0x2fba4 <start_thread_common.constprop.0+0x114>
2fab5: start_thread_common.constprop.0+0x25 | <alternative.2fab5> | X86_FEATURE_ALWAYS | X86_BUG_NULL_SEG
2fab5: start_thread_common.constprop.0+0x25 | jmp 0x2faba <.altinstr_aux+0x2f4> | jmp 0x4b0 <start_thread_common.constprop.0+0x3f> | nop5
2faba: start_thread_common.constprop.0+0x2a mov $0x2b,%eax
... NOP sequence shortening:
1048e2: snapshot_write_finalize+0xc2 je 0x104917 <snapshot_write_finalize+0xf7>
1048e4: snapshot_write_finalize+0xc4 nop6
1048ea: snapshot_write_finalize+0xca nop11
1048f5: snapshot_write_finalize+0xd5 nop11
104900: snapshot_write_finalize+0xe0 mov %rax,%rcx
104903: snapshot_write_finalize+0xe3 mov 0x10(%rdx),%rax
... and much more.
- Function validation tracing support (Alexandre Chartre)
- Various -ffunction-sections fixes (Josh Poimboeuf)
- Clang AutoFDO (Automated Feedback-Directed Optimizations) support
(Josh Poimboeuf)
- Misc fixes and cleanups (Borislav Petkov, Chen Ni, Dylan Hatch, Ingo
Molnar, John Wang, Josh Poimboeuf, Pankaj Raghav, Peter Zijlstra,
Thorsten Blum)
* tag 'objtool-core-2025-12-01' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (129 commits)
objtool: Fix segfault on unknown alternatives
objtool: Build with disassembly can fail when including bdf.h
objtool: Trim trailing NOPs in alternative
objtool: Add wide output for disassembly
objtool: Compact output for alternatives with one instruction
objtool: Improve naming of group alternatives
objtool: Add Function to get the name of a CPU feature
objtool: Provide access to feature and flags of group alternatives
objtool: Fix address references in alternatives
objtool: Disassemble jump table alternatives
objtool: Disassemble exception table alternatives
objtool: Print addresses with alternative instructions
objtool: Disassemble group alternatives
objtool: Print headers for alternatives
objtool: Preserve alternatives order
objtool: Add the --disas=<function-pattern> action
objtool: Do not validate IBT for .return_sites and .call_sites
objtool: Improve tracing of alternative instructions
objtool: Add functions to better name alternatives
objtool: Identify the different types of alternatives
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull namespace updates from Christian Brauner:
"This contains substantial namespace infrastructure changes including a new
system call, active reference counting, and extensive header cleanups.
The branch depends on the shared kbuild branch for -fms-extensions support.
Features:
- listns() system call
Add a new listns() system call that allows userspace to iterate
through namespaces in the system. This provides a programmatic
interface to discover and inspect namespaces, addressing
longstanding limitations:
Currently, there is no direct way for userspace to enumerate
namespaces. Applications must resort to scanning /proc/*/ns/ across
all processes, which is:
- Inefficient - requires iterating over all processes
- Incomplete - misses namespaces not attached to any running
process but kept alive by file descriptors, bind mounts, or
parent references
- Permission-heavy - requires access to /proc for many processes
- No ordering or ownership information
- No filtering per namespace type
The listns() system call solves these problems:
ssize_t listns(const struct ns_id_req *req, u64 *ns_ids,
size_t nr_ns_ids, unsigned int flags);
struct ns_id_req {
__u32 size;
__u32 spare;
__u64 ns_id;
struct /* listns */ {
__u32 ns_type;
__u32 spare2;
__u64 user_ns_id;
};
};
Features include:
- Pagination support for large namespace sets
- Filtering by namespace type (MNT_NS, NET_NS, USER_NS, etc.)
- Filtering by owning user namespace
- Permission checks respecting namespace isolation
- Active Reference Counting
Introduce an active reference count that tracks namespace
visibility to userspace. A namespace is visible in the following
cases:
- The namespace is in use by a task
- The namespace is persisted through a VFS object (namespace file
descriptor or bind-mount)
- The namespace is a hierarchical type and is the parent of child
namespaces
The active reference count does not regulate lifetime (that's still
done by the normal reference count) - it only regulates visibility
to namespace file handles and listns().
This prevents resurrection of namespaces that are pinned only for
internal kernel reasons (e.g., user namespaces held by
file->f_cred, lazy TLB references on idle CPUs, etc.) which should
not be accessible via (1)-(3).
- Unified Namespace Tree
Introduce a unified tree structure for all namespaces with:
- Fixed IDs assigned to initial namespaces
- Lookup based solely on inode number
- Maintained list of owned namespaces per user namespace
- Simplified rbtree comparison helpers
Cleanups
- Header Reorganization:
- Move namespace types into separate header (ns_common_types.h)
- Decouple nstree from ns_common header
- Move nstree types into separate header
- Switch to new ns_tree_{node,root} structures with helper functions
- Use guards for ns_tree_lock
- Initial Namespace Reference Count Optimization
- Make all reference counts on initial namespaces a nop to avoid
pointless cacheline ping-pong for namespaces that can never go
away
- Drop custom reference count initialization for initial namespaces
- Add NS_COMMON_INIT() macro and use it for all namespaces
- pid: rely on common reference count behavior
- Miscellaneous Cleanups
- Rename exit_task_namespaces() to exit_nsproxy_namespaces()
- Rename is_initial_namespace() and make argument const
- Use boolean to indicate anonymous mount namespace
- Simplify owner list iteration in nstree
- nsfs: raise SB_I_NODEV, SB_I_NOEXEC, and DCACHE_DONTCACHE explicitly
- nsfs: use inode_just_drop()
- pidfs: raise DCACHE_DONTCACHE explicitly
- pidfs: simplify PIDFD_GET__NAMESPACE ioctls
- libfs: allow to specify s_d_flags
- cgroup: add cgroup namespace to tree after owner is set
- nsproxy: fix free_nsproxy() and simplify create_new_namespaces()
Fixes:
- setns(pidfd, ...) race condition
Fix a subtle race when using pidfds with setns(). When the target
task exits after prepare_nsset() but before commit_nsset(), the
namespace's active reference count might have been dropped. If
setns() then installs the namespaces, it would bump the active
reference count from zero without taking the required reference on
the owner namespace, leading to underflow when later decremented.
The fix resurrects the ownership chain if necessary - if the caller
succeeded in grabbing passive references, the setns() should
succeed even if the target task exits or gets reaped.
- Return EFAULT on put_user() error instead of success
- Make sure references are dropped outside of RCU lock (some
namespaces like mount namespace sleep when putting the last
reference)
- Don't skip active reference count initialization for network
namespace
- Add asserts for active refcount underflow
- Add asserts for initial namespace reference counts (both passive
and active)
- ipc: enable is_ns_init_id() assertions
- Fix kernel-doc comments for internal nstree functions
- Selftests
- 15 active reference count tests
- 9 listns() functionality tests
- 7 listns() permission tests
- 12 inactive namespace resurrection tests
- 3 threaded active reference count tests
- commit_creds() active reference tests
- Pagination and stress tests
- EFAULT handling test
- nsid tests fixes"
* tag 'namespace-6.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs: (103 commits)
pidfs: simplify PIDFD_GET_<type>_NAMESPACE ioctls
nstree: fix kernel-doc comments for internal functions
nsproxy: fix free_nsproxy() and simplify create_new_namespaces()
selftests/namespaces: fix nsid tests
ns: drop custom reference count initialization for initial namespaces
pid: rely on common reference count behavior
ns: add asserts for initial namespace active reference counts
ns: add asserts for initial namespace reference counts
ns: make all reference counts on initial namespace a nop
ipc: enable is_ns_init_id() assertions
fs: use boolean to indicate anonymous mount namespace
ns: rename is_initial_namespace()
ns: make is_initial_namespace() argument const
nstree: use guards for ns_tree_lock
nstree: simplify owner list iteration
nstree: switch to new structures
nstree: add helper to operate on struct ns_tree_{node,root}
nstree: move nstree types into separate header
nstree: decouple from ns_common header
ns: move namespace types into separate header
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull misc vfs updates from Christian Brauner:
"Features:
- Cheaper MAY_EXEC handling for path lookup. This elides MAY_WRITE
permission checks during path lookup and adds the
IOP_FASTPERM_MAY_EXEC flag so filesystems like btrfs can avoid
expensive permission work.
- Hide dentry_cache behind runtime const machinery.
- Add German Maglione as virtiofs co-maintainer.
Cleanups:
- Tidy up and inline step_into() and walk_component() for improved
code generation.
- Re-enable IOCB_NOWAIT writes to files. This refactors file
timestamp update logic, fixing a layering bypass in btrfs when
updating timestamps on device files and improving FMODE_NOCMTIME
handling in VFS now that nfsd started using it.
- Path lookup optimizations extracting slowpaths into dedicated
routines and adding branch prediction hints for mntput_no_expire(),
fd_install(), lookup_slow(), and various other hot paths.
- Enable clang's -fms-extensions flag, requiring a JFS rename to
avoid conflicts.
- Remove spurious exports in fs/file_attr.c.
- Stop duplicating union pipe_index declaration. This depends on the
shared kbuild branch that brings in -fms-extensions support which
is merged into this branch.
- Use MD5 library instead of crypto_shash in ecryptfs.
- Use largest_zero_folio() in iomap_dio_zero().
- Replace simple_strtol/strtoul with kstrtoint/kstrtouint in init and
initrd code.
- Various typo fixes.
Fixes:
- Fix emergency sync for btrfs. Btrfs requires an explicit sync_fs()
call with wait == 1 to commit super blocks. The emergency sync path
never passed this, leaving btrfs data uncommitted during emergency
sync.
- Use local kmap in watch_queue's post_one_notification().
- Add hint prints in sb_set_blocksize() for LBS dependency on THP"
* tag 'vfs-6.19-rc1.misc' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs: (35 commits)
MAINTAINERS: add German Maglione as virtiofs co-maintainer
fs: inline step_into() and walk_component()
fs: tidy up step_into() & friends before inlining
orangefs: use inode_update_timestamps directly
btrfs: fix the comment on btrfs_update_time
btrfs: use vfs_utimes to update file timestamps
fs: export vfs_utimes
fs: lift the FMODE_NOCMTIME check into file_update_time_flags
fs: refactor file timestamp update logic
include/linux/fs.h: trivial fix: regualr -> regular
fs/splice.c: trivial fix: pipes -> pipe's
fs: mark lookup_slow() as noinline
fs: add predicts based on nd->depth
fs: move mntput_no_expire() slowpath into a dedicated routine
fs: remove spurious exports in fs/file_attr.c
watch_queue: Use local kmap in post_one_notification()
fs: touch up predicts in path lookup
fs: move fd_install() slowpath into a dedicated routine and provide commentary
fs: hide dentry_cache behind runtime const machinery
fs: touch predicts in do_dentry_open()
...
|
|
Switch to using the generic infrastructure to check for and handle pending
work before transitioning into guest mode.
xfer_to_guest_mode_handle_work() does a few more things than the current
code does when deciding whether or not to exit the __vcpu_run() loop. The
exittime tests from kvm-unit-tests, in my tests, were within a few percent
compared to before this series, which is within noise tolerance.
Co-developed-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Andrew Donnellan <ajd@linux.ibm.com>
Acked-by: Janosch Frank <frankja@linux.ibm.com>
[frankja@linux.ibm.com: Removed semicolon]
Signed-off-by: Janosch Frank <frankja@linux.ibm.com>
|
|
Move enabling and disabling of interrupts around the SIE instruction to
entry code. Enabling interrupts only after the __TI_sie flag has been set
guarantees that the SIE instruction is not executed if an interrupt happens
between enabling interrupts and the execution of the SIE instruction.
Interrupt handlers and machine check handler forward the PSW to the
sie_exit label in such cases.
This is a prerequisite for VIRT_XFER_TO_GUEST_WORK to prevent that guest
context is entered when e.g. a scheduler IPI, indicating that a reschedule
is required, happens right before the SIE instruction, which could lead to
long delays.
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Tested-by: Andrew Donnellan <ajd@linux.ibm.com>
Signed-off-by: Andrew Donnellan <ajd@linux.ibm.com>
Reviewed-by: Janosch Frank <frankja@linux.ibm.com>
Signed-off-by: Janosch Frank <frankja@linux.ibm.com>
|
|
Add a signal_exits counter for s390, as exists on arm64, loongarch, mips,
powerpc, riscv and x86.
This is used by kvm_handle_signal_exit(), which we will use when we
later enable CONFIG_VIRT_XFER_TO_GUEST_WORK.
Signed-off-by: Andrew Donnellan <ajd@linux.ibm.com>
Reviewed-by: Janosch Frank <frankja@linux.ibm.com>
Signed-off-by: Janosch Frank <frankja@linux.ibm.com>
|
|
Use the lay instruction instead of aghik. aghik is only available since
z196, therefore compiling the kernel for z10 results in this error:
arch/s390/kernel/entry.S: Assembler messages:
arch/s390/kernel/entry.S:165: Error: Unrecognized opcode: `aghik'
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202511261518.nBbQN5h7-lkp@intel.com/
Fixes: f5730d44e05e ("s390: Add stackprotector support")
Reviewed-by: Jan Polensky <japo@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
|
|
KVM TDX changes for 6.19:
- Overhaul the TDX code to address systemic races where KVM (acting on behalf
of userspace) could inadvertantly trigger lock contention in the TDX-Module,
which KVM was either working around in weird, ugly ways, or was simply
oblivious to (as proven by Yan tripping several KVM_BUG_ON()s with clever
selftests).
- Fix a bug where KVM could corrupt a vCPU's cpu_list when freeing a vCPU if
creating said vCPU failed partway through.
- Fix a few sparse warnings (bad annotation, 0 != NULL).
- Use struct_size() to simplify copying capabilities to userspace.
|
|
The compiler/assembler flag -m64 is added and removed at two locations.
This pointless exercise is a leftover to keep the 31 and 64 bit vdso
Makefiles as symmetrical as possible. Given that the 31 bit vdso code
does not exist anymore, remove the -m64 flag handling.
Suggested-by: Jens Remus <jremus@linux.ibm.com>
Reviewed-by: Jens Remus <jremus@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
|
|
Since compat is gone there is only a 64 bit vdso left.
Remove the superfluous "64" suffix everywhere.
Reviewed-by: Jens Remus <jremus@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
|
|
All the code is 64 bit, therefore remove the superfluous suffix.
Reviewed-by: Jens Remus <jremus@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
|
|
This simplifies the vDSO linker script. The ELF_DETAILS macro was not
used in addition, as done on arm64 and powerpc, as that would introduce
an empty .modinfo section.
Note that this rearranges the .comment section to follow after all of
the debug sections.
Signed-off-by: Jens Remus <jremus@linux.ibm.com>
Reviewed-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
|
|
There is simply no need for the hugely confusing concept of 'non-swap'
swap entries now we have the concept of softleaf entries and relevant
softleaf_xxx() helpers.
Adjust all callers to use these instead and remove non_swap_entry()
altogether.
No functional change intended.
Link: https://lkml.kernel.org/r/2562093f37f4a9cffea0447058014485eb50aaaf.1762812360.git.lorenzo.stoakes@oracle.com
Signed-off-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: Alexander Gordeev <agordeev@linux.ibm.com>
Cc: Alistair Popple <apopple@nvidia.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Axel Rasmussen <axelrasmussen@google.com>
Cc: Baolin Wang <baolin.wang@linux.alibaba.com>
Cc: Baoquan He <bhe@redhat.com>
Cc: Barry Song <baohua@kernel.org>
Cc: Byungchul Park <byungchul@sk.com>
Cc: Chengming Zhou <chengming.zhou@linux.dev>
Cc: Chris Li <chrisl@kernel.org>
Cc: Christian Borntraeger <borntraeger@linux.ibm.com>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Claudio Imbrenda <imbrenda@linux.ibm.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Dev Jain <dev.jain@arm.com>
Cc: Gerald Schaefer <gerald.schaefer@linux.ibm.com>
Cc: Gregory Price <gourry@gourry.net>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: "Huang, Ying" <ying.huang@linux.alibaba.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Jann Horn <jannh@google.com>
Cc: Janosch Frank <frankja@linux.ibm.com>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: Joshua Hahn <joshua.hahnjy@gmail.com>
Cc: Kairui Song <kasong@tencent.com>
Cc: Kemeng Shi <shikemeng@huaweicloud.com>
Cc: Lance Yang <lance.yang@linux.dev>
Cc: Leon Romanovsky <leon@kernel.org>
Cc: Liam Howlett <liam.howlett@oracle.com>
Cc: Mathew Brost <matthew.brost@intel.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Miaohe Lin <linmiaohe@huawei.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Naoya Horiguchi <nao.horiguchi@gmail.com>
Cc: Nhat Pham <nphamcs@gmail.com>
Cc: Nico Pache <npache@redhat.com>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Pasha Tatashin <pasha.tatashin@soleen.com>
Cc: Peter Xu <peterx@redhat.com>
Cc: Rakie Kim <rakie.kim@sk.com>
Cc: Rik van Riel <riel@surriel.com>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Cc: SeongJae Park <sj@kernel.org>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Sven Schnelle <svens@linux.ibm.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Wei Xu <weixugc@google.com>
Cc: xu xin <xu.xin16@zte.com.cn>
Cc: Yuanchu Xie <yuanchu@google.com>
Cc: Zi Yan <ziy@nvidia.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
For hugetlbs, gmap puds have the present bit set. For normal puds (which
point to ptes), the bit is not set. This is in contrast to the normal
userspace puds, which always have the bit set for present pmds.
This causes issues when ___pte_offset_map() is modified to only check for
the present bit.
The solution to the problem is simply to always set the present bit for
present gmap pmds.
Link: https://lkml.kernel.org/r/20251028130150.57379-2-imbrenda@linux.ibm.com
Signed-off-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Link: https://lore.kernel.org/lkml/20251017144924.10034-1-borntraeger@linux.ibm.com/
Tested-by: Christian Borntraeger <borntraeger@linux.ibm.com>
Acked-by: Christian Borntraeger <borntraeger@linux.ibm.com>
Acked-by: Balbir Singh <balbirs@nvidia.com>
Cc: Alexander Gordeev <agordeev@linux.ibm.com>
Cc: Alistair Popple <apopple@nvidia.com>
Cc: Baolin Wang <baolin.wang@linux.alibaba.com>
Cc: Barry Song <baohua@kernel.org>
Cc: Byungchul Park <byungchul@sk.com>
Cc: Danilo Krummrich <dakr@kernel.org>
Cc: Dave Airlie <airlied@gmail.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Dev Jain <dev.jain@arm.com>
Cc: Francois Dugast <francois.dugast@intel.com>
Cc: Gregory Price <gourry@gourry.net>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: "Huang, Ying" <ying.huang@linux.alibaba.com>
Cc: Joshua Hahn <joshua.hahnjy@gmail.com>
Cc: Liam Howlett <liam.howlett@oracle.com>
Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: Lyude <lyude@redhat.com>
Cc: Mathew Brost <matthew.brost@intel.com>
Cc: Mika Penttilä <mpenttil@redhat.com>
Cc: Nico Pache <npache@redhat.com>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Rakie Kim <rakie.kim@sk.com>
Cc: Ralph Campbell <rcampbell@nvidia.com>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Zi Yan <ziy@nvidia.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
In the origin logic, the bpf_arch_text_poke() assume that the old and new
instructions have the same opcode. However, they can have different opcode
if we want to replace a "call" insn with a "jmp" insn.
Therefore, add the new function parameter "old_t" along with the "new_t",
which are used to indicate the old and new poke type. Meanwhile, adjust
the implement of bpf_arch_text_poke() for all the archs.
"BPF_MOD_NOP" is added to make the code more readable. In
bpf_arch_text_poke(), we still check if the new and old address is NULL to
determine if nop insn should be used, which I think is more safe.
Signed-off-by: Menglong Dong <dongml2@chinatelecom.cn>
Link: https://lore.kernel.org/r/20251118123639.688444-6-dongml2@chinatelecom.cn
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Stackprotector support was previously unavailable on s390 because by
default compilers generate code which is not suitable for the kernel:
the canary value is accessed via thread local storage, where the address
of thread local storage is within access registers 0 and 1.
Using those registers also for the kernel would come with a significant
performance impact and more complicated kernel entry/exit code, since
access registers contents would have to be exchanged on every kernel entry
and exit.
With the upcoming gcc 16 release new compiler options will become available
which allow to generate code suitable for the kernel. [1]
Compiler option -mstack-protector-guard=global instructs gcc to generate
stackprotector code that refers to a global stackprotector canary value via
symbol __stack_chk_guard. Access to this value is guaranteed to occur via
larl and lgrl instructions.
Furthermore, compiler option -mstack-protector-guard-record generates a
section containing all code addresses that reference the canary value.
To allow for per task canary values the instructions which load the address
of __stack_chk_guard are patched so they access a lowcore field instead: a
per task canary value is available within the task_struct of each task, and
is written to the per-cpu lowcore location on each context switch.
Also add sanity checks and debugging option to be consistent with other
kernel code patching mechanisms.
Full debugging output can be enabled with the following kernel command line
options:
debug_stackprotector
bootdebug
ignore_loglevel
earlyprintk
dyndbg="file stackprotector.c +p"
Example debug output:
stackprot: 0000021e402d4eda: c010005a9ae3 -> c01f00070240
where "<insn address>: <old insn> -> <new insn>".
[1] gcc commit 0cd1f03939d5 ("s390: Support global stack protector")
Reviewed-by: Sven Schnelle <svens@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
|
|
Preinitialize the return value, and break out the for loop in
module_finalize() in case of an error to get rid of an ifdef.
This makes it easier to add additional code, which may also depend
on config options.
Reviewed-by: Sven Schnelle <svens@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
|
|
The KMSG_COMPONENT macro is a leftover of the s390 specific "kernel
message catalog" which never made it upstream.
Remove the macro in order to get rid of a pointless indirection. Replace
all users with the string it defines. In almost all cases this leads to a
simple replacement like this:
- #define KMSG_COMPONENT "appldata"
- #define pr_fmt(fmt) KMSG_COMPONENT ": " fmt
+ #define pr_fmt(fmt) "appldata: " fmt
Except for some special cases this is just mechanical/scripted work.
Acked-by: Thomas Richter <tmricht@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
|
|
Since the rework of the kernel virtual address space [1] the module area
and the kernel image are within the same 4GB area. Therefore there is no
need for the weak per cpu workaround for modules anymore. Remove it.
[1] commit c98d2ecae08f ("s390/mm: Uncouple physical vs virtual address spaces")
Acked-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
|
|
Remove ansi_cprng, since it's obsolete and unused, as confirmed at
https://lore.kernel.org/r/aQxpnckYMgAAOLpZ@gondor.apana.org.au/
This was originally added in 2008, apparently as a FIPS approved random
number generator. Whether this has ever belonged upstream is
questionable. Either way, ansi_cprng is no longer usable for this
purpose, since it's been superseded by the more modern algorithms in
crypto/drbg.c, and FIPS itself no longer allows it. (NIST SP 800-131A
Rev 1 (2015) says that RNGs based on ANSI X9.31 will be disallowed after
2015. NIST SP 800-131A Rev 2 (2019) confirms they are now disallowed.)
Therefore, there is no reason to keep it around.
Suggested-by: Herbert Xu <herbert@gondor.apana.org.au>
Cc: Haotian Zhang <vulab@iscas.ac.cn>
Cc: Neil Horman <nhorman@tuxdriver.com>
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Bring in the UDB and objtool data annotations to avoid conflicts while further extending the bug exceptions.
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
|
|
The VSIE code currently checks that the BSCA struct fits within
a page, and returns a validity exception 0x003b if it doesn't.
The BSCA is pinned in memory rather than shadowed (see block
comment at end of kvm_s390_cpu_feat_init()), so enforcing the
CPU entries to be on the same pinned page makes sense.
Except those entries aren't going to be used below the guest,
and according to the definition of that validity exception only
the header of the BSCA (everything but the CPU entries) needs to
be within a page. Adjust the alignment check to account for that.
Signed-off-by: Eric Farman <farman@linux.ibm.com>
Reviewed-by: Christian Borntraeger <borntraeger@linux.ibm.com>
Reviewed-by: Christoph Schlameuss <schlameuss@linux.ibm.com>
Signed-off-by: Janosch Frank <frankja@linux.ibm.com>
|
|
Setting KVM_CAP_S390_USER_OPEREXEC will forward all operation
exceptions to user space. This also includes the 0x0000 instructions
managed by KVM_CAP_S390_USER_INSTR0. It's helpful if user space wants
to emulate instructions which do not (yet) have an opcode.
While we're at it refine the documentation for
KVM_CAP_S390_USER_INSTR0.
Signed-off-by: Janosch Frank <frankja@linux.ibm.com>
Reviewed-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Acked-by: Christian Borntraeger <borntraeger@linux.ibm.com>
Signed-off-by: Janosch Frank <frankja@linux.ibm.com>
|
|
set_tsk_need_resched(current) requires set_preempt_need_resched(current) to
work correctly outside of the scheduler.
Provide set_need_resched_current() which wraps this correctly and replace
all the open coded instances.
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://patch.msgid.link/20251116174750.665769842@linutronix.de
|
|
just have hypfs_create_file() do the usual simple_start_creating()/
d_make_persistent()/simple_done_creating() and that's it
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
same story as for hypfs_create_str()
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
Every single caller only cares about PTR_ERR_OR_ZERO() of return value...
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
hypfs dentries end up with refcount 2 when they are not busy.
Refcount 1 is enough to keep them pinned, and going that way
allows to simplify things nicely:
* don't need to drop an extra reference before the
call of kill_litter_super() in ->kill_sb(); all we need
there is to reset the cleanup list - everything on it will
be taken out automatically.
* we can make use of simple_recursive_removal() on
tree rebuilds; just make sure that only children of root
end up in the cleanup list and hypfs_delete_tree() becomes
much simpler
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
The s390 syscall.tbl format differs slightly from most others, and
therefore requires an s390 specific system call table generation
script.
With compat support gone use the opportunity to switch to generic
system call table generation. The abi for all 64 bit system calls is
now common, since there is no need to specify if system call entry
points are only for 64 bit anymore.
Furthermore create the system call table in C instead of assembler
code in order to get type checking for all system call functions
contained within the table.
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
|
|
With compat support gone there is only one system call table
left. Therefore remove the sys_call_table pointer from
thread_struct and use the sys_call_table directly.
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
|
|
Since the kernel does not support running 31 bit / compat binaries
anymore, remove also the corresponding 31 bit support from uapi header
files.
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
|
|
There shouldn't be any 31 bit code around anymore that matters.
Remove the compat layer support required to run 31 bit code.
Reason for removal is code simplification and reduced test effort.
Note that this comes without any deprecation warnings added to config
options, or kernel messages, since most likely those would be ignored
anyway.
If it turns out there is still a reason to keep the compat layer this
can be reverted at any time in the future.
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
|
|
All system call wrappers should match the sys_call_ptr_t type. This is not
the case for system calls without parameters. Add the missing pt_regs
parameter there too.
Note: this is currently not a problem, since the parameter is unused.
However it prevents to create a correctly typed system call table in
C. With the current assembler implementation this works because of
missing type checking.
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
|
|
kvm_s390_handle_lpsw() make use of the psw_compat_t type even though
the code has nothing to do with CONFIG_COMPAT, for which the type is
supposed to be used. Use psw32_t instead.
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
|
|
Use a standard "_t" suffix for psw_t32 and rename it to psw32_t.
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
|
|
INVALID_PHYS_ADDR has very similar definitions across the code base.
Hence just move that inside header <liux/mm.h> for more generic usage.
Also drop the now redundant ones which are no longer required.
Link: https://lkml.kernel.org/r/20251021025638.2420216-1-anshuman.khandual@arm.com
Signed-off-by: Anshuman Khandual <anshuman.khandual@arm.com>
Acked-by: Alexander Gordeev <agordeev@linux.ibm.com> [s390]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
Pull s390 fix from Heiko Carstens:
- Fix a bug in the __ptep_rdp() inline assembly which may lead to
missing TLB flushes
* tag 's390-6.18-4' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
s390/mm: Fix __ptep_rdp() inline assembly
|
|
When a zero ASCE is passed to the __ptep_rdp() inline assembly, the
generated instruction should have the R3 field of the instruction set to
zero. However the inline assembly is written incorrectly: for such cases a
zero is loaded into a register allocated by the compiler and this register
is then used by the instruction.
This means that selected TLB entries may not be flushed since the specified
ASCE does not match the one which was used when the selected TLB entries
were created.
Fix this by removing the asce and opt parameters of __ptep_rdp(), since
all callers always pass zero, and use a hard-coded register zero for
the R3 field.
Fixes: 0807b856521f ("s390/mm: add support for RDP (Reset DAT-Protection)")
Cc: stable@vger.kernel.org
Reviewed-by: Gerald Schaefer <gerald.schaefer@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
|
|
In case of a kernel crash caused by a protection exception, print the
unmodified PSW address as reported by the CPU. The protection exception
handler modifies the PSW address in order to keep fault handling easy,
however that leads to misleading call traces.
Therefore restore the original PSW address before printing it.
Before this change the output in case of a protection exception looks like
this:
Oops: 0004 ilc:2 [#1]SMP
Krnl PSW : 0704c00180000000 000003ffe0b40d78 (sysrq_handle_crash+0x28/0x40)
R:0 T:1 IO:1 EX:1 Key:0 M:1 W:0 P:0 AS:3 CC:0 PM:0 RI:0 EA:3
...
Krnl Code: 000003ffe0b40d66: e3e0f0980024 stg %r14,152(%r15)
000003ffe0b40d6c: c010fffffff2 larl %r1,000003ffe0b40d50
#000003ffe0b40d72: c0200046b6bc larl %r2,000003ffe1417aea
>000003ffe0b40d78: 92021000 mvi 0(%r1),2
000003ffe0b40d7c: c0e5ffae03d6 brasl %r14,000003ffe0101528
With this change it looks like this:
Oops: 0004 ilc:2 [#1]SMP
Krnl PSW : 0704c00180000000 000003ffe0b40dfc (sysrq_handle_crash+0x2c/0x40)
R:0 T:1 IO:1 EX:1 Key:0 M:1 W:0 P:0 AS:3 CC:0 PM:0 RI:0 EA:3
...
Krnl Code: 000003ffe0b40dec: c010fffffff2 larl %r1,000003ffe0b40dd0
000003ffe0b40df2: c0200046b67c larl %r2,000003ffe1417aea
*000003ffe0b40df8: 92021000 mvi 0(%r1),2
>000003ffe0b40dfc: c0e5ffae03b6 brasl %r14,000003ffe0101568
000003ffe0b40e02: 0707 bcr 0,%r7
Note that with this change the PSW address points to the instruction behind
the instruction which caused the exception like it is expected for
protection exceptions.
This also replaces the '#' marker in the disassembly with '*', which allows
to distinguish between new and old behavior.
Reviewed-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
|
