| Age | Commit message (Collapse) | Author |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull SoC driver updates from Arnd Bergmann:
"This is the first half of the driver changes:
- A treewide interface change to the "syscore" operations for power
management, as a preparation for future Tegra specific changes
- Reset controller updates with added drivers for LAN969x, eic770 and
RZ/G3S SoCs
- Protection of system controller registers on Renesas and Google
SoCs, to prevent trivially triggering a system crash from e.g.
debugfs access
- soc_device identification updates on Nvidia, Exynos and Mediatek
- debugfs support in the ST STM32 firewall driver
- Minor updates for SoC drivers on AMD/Xilinx, Renesas, Allwinner, TI
- Cleanups for memory controller support on Nvidia and Renesas"
* tag 'soc-drivers-6.19' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (114 commits)
memory: tegra186-emc: Fix missing put_bpmp
Documentation: reset: Remove reset_controller_add_lookup()
reset: fix BIT macro reference
reset: rzg2l-usbphy-ctrl: Fix a NULL vs IS_ERR() bug in probe
reset: th1520: Support reset controllers in more subsystems
reset: th1520: Prepare for supporting multiple controllers
dt-bindings: reset: thead,th1520-reset: Add controllers for more subsys
dt-bindings: reset: thead,th1520-reset: Remove non-VO-subsystem resets
reset: remove legacy reset lookup code
clk: davinci: psc: drop unused reset lookup
reset: rzg2l-usbphy-ctrl: Add support for RZ/G3S SoC
reset: rzg2l-usbphy-ctrl: Add support for USB PWRRDY
dt-bindings: reset: renesas,rzg2l-usbphy-ctrl: Document RZ/G3S support
reset: eswin: Add eic7700 reset driver
dt-bindings: reset: eswin: Documentation for eic7700 SoC
reset: sparx5: add LAN969x support
dt-bindings: reset: microchip: Add LAN969x support
soc: rockchip: grf: Add select correct PWM implementation on RK3368
soc/tegra: pmc: Add USB wake events for Tegra234
amba: tegra-ahb: Fix device leak on SMMU enable
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux
Pull gpio updates from Bartosz Golaszewski:
"There's one new driver, lots of various updates to existing ones, some
refactoring support for new models and misc tweaks and fixes.
The biggest new feature in GPIO core is adding support for managed,
enable-counted sharing of GPIO pins, something that - until now - was
only hacked around with the GPIOD_FLAGS_BIT_NONEXCLUSIVE request flag
which basically allowed drivers to "fight it out" for the descriptor
and provided no synchronization. It was enabled on Qualcomm platforms
(and thus is enabled on arm64 defconfig) and I plan on removing
GPIOD_FLAGS_BIT_NONEXCLUSIVE once all drivers using it are switched to
the new mechanism.
GPIO core:
- add proper support for shared GPIOs that's aiming to replace the
current sharing mechanism (which provides no synchronization ot
enable counting) and enable it for Qualcomm platforms
- improve the software node GPIO lookup by using the fwnode
representation instead of the software node's name which was prone
to bugs (GPIO controllers don't have to use the software node's
name as their kernel label)
- remove the last user of legacy-of-mm-gpiochip.h and drop the header
- move closer to removing the legacy gpio_request_one() routine
- rename some symbols for consistency
- shrink GPIO printk() helpers by reusing existing code
- remove some redundant kernel messages
- use min() instead of min_t() in GPIO ACPI code
- use system_percpu_wq instead of system_wq in GPIO character device
code
New drivers:
- add a driver for the QIXIS FPGA GPIO controller
Driver improvements:
- use modernized variants of power management macros across a wide
array of drivers in order to avoid having to use the __maybe_unused
attribute
- convert gpio-elkhartlake and reset-gpio to using the auxiliary bus
instead of the platform bus as they are not really described in
firmware
- use lock guards and update symbol prefixes in gpio-mmio
- support the bryx radio interface kit in gpio-mpsse + refactor the
driver
- use software nodes for configuring the reset-gpio driver, including
setting up the reference to the shared "reset" pin
- check and propagate the return value of gpiod_set_value() to
user-space in gpio-virtuser (this was previously not possible as
this function returned void)
- extend the gpio-regmap helper with more features (bypass cache for
aliased inputs, force writes for aliased data registers, add a new
configuration parameter)
- remove unneeded includes from gpio-aspeed and gpio-latch
- add support for Tegra410 to gpio-tegra186
- replace PCI-specific PM with generic device-level PM in gpio-bt8xx
- use dynamic GPIO range allocation in gpio-loongson-64bit
- improve handling of level-triggered interrupts in gpio-pca953x
- add suspend/resume support to gpio-fxl6408
- add support for more models to gpio-menz127
- optimize gpio-mvebu interrupt handling by avoiding unnecessary
calls to mvebu_gpio_irq_handler()
- make locking more consistent in gpio-grgpio
Device-tree bindings:
- document new NXP and Microchip models
Documentation:
- add a comprehensive compatibility and feature list for
gpio-pca953x, which is a great addition as it's probably the most
commonly used GPIO expander driver
- kernel-doc tweaks
Late fixes:
- use BYTE_CTRL_MODE for 2K2000/3000 models in gpio-loongson"
* tag 'gpio-updates-for-v6.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux: (80 commits)
gpio: loongson: Switch 2K2000/3000 GPIO to BYTE_CTRL_MODE
gpio: regmap: fix kernel-doc notation
gpio: shared: fix a deadlock
gpio: shared-proxy: set suppress_bind_attrs
gpio: shared: ignore GPIO hogs when traversing the device tree
gpio: shared: ignore special __symbols__ node when traversing device tree
gpio: shared: handle the reset-gpios corner case
gpio: zynq: Use modern PM macros
gpio: xilinx: Use modern PM macros
gpio: xgene: Use modern PM macros
gpio: uniphier: Use modern PM macros
gpio: tqmx86: Use modern PM macros
gpio: pch: Use modern PM macros
gpio: omap: Use modern PM macros
gpio: msc313: Use modern PM macros
gpio: mlxbf2: Use modern PM macros
gpio: ml-ioh: Use modern PM macros
gpio: pl061: Use modern PM macros
gpio: htc-egpio: Use modern PM macros
gpio: brcmstb: Use modern PM macros
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound updates from Takashi Iwai:
"The majority of changes at this time were about ASoC with a lot of
code refactoring works. From the functionality POV, there isn't much
to see, but we have a wide range of device-specific fixes and updates.
Here are some highlights:
- Continued ASoC API cleanup work, spanned over many files
- Added a SoundWire SCDA generic class driver with regmap support
- Enhancements and fixes for Cirrus, Intel, Maxim and Qualcomm.
- Support for ASoC Allwinner A523, Mediatek MT8189, Qualcomm QCM2290,
QRB2210 and SM6115, SpacemiT K1, and TI TAS2568, TAS5802, TAS5806,
TAS5815, TAS5828 and TAS5830
- Usual HD-audio and USB-audio quirks and fixups
- Support for Onkyo SE-300PCIE, TASCAM IF-FW/DM MkII
Some gpiolib changes for shared GPIOs are included along with this PR
for covering ASoC drivers changes"
* tag 'sound-6.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (739 commits)
ALSA: hda/realtek: Add PCI SSIDs to HP ProBook quirks
ALSA: usb-audio: Simplify with usb_endpoint_max_periodic_payload()
ALSA: hda/realtek: fix mute/micmute LEDs don't work for more HP laptops
ALSA: rawmidi: Fix inconsistent indenting warning reported by smatch
ALSA: dice: fix buffer overflow in detect_stream_formats()
ASoC: codecs: Modify awinic amplifier dsp read and write functions
ASoC: SDCA: Fixup some more Kconfig issues
ASoC: cs35l56: Log a message if firmware is missing
ASoC: nau8325: Delete a stray tab
firmware: cs_dsp: Add test cases for client_ops == NULL
firmware: cs_dsp: Don't require client to provide a struct cs_dsp_client_ops
ASoC: fsl_micfil: Set channel range control
ASoC: fsl_micfil: Add default quality for different platforms
ASoC: intel: sof_sdw: Add codec_info for cs42l45
ASoC: sdw_utils: Add cs42l45 support functions
ASoC: intel: sof_sdw: Add ability to have auxiliary devices
ASoC: sdw_utils: Move codec_name to dai info
ASoC: sdw_utils: Add codec_conf for every DAI
ASoC: SDCA: Add terminal type into input/output widget name
ASoC: SDCA: Align mute controls to ALSA expectations
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull fd prepare updates from Christian Brauner:
"This adds the FD_ADD() and FD_PREPARE() primitive. They simplify the
common pattern of get_unused_fd_flags() + create file + fd_install()
that is used extensively throughout the kernel and currently requires
cumbersome cleanup paths.
FD_ADD() - For simple cases where a file is installed immediately:
fd = FD_ADD(O_CLOEXEC, vfio_device_open_file(device));
if (fd < 0)
vfio_device_put_registration(device);
return fd;
FD_PREPARE() - For cases requiring access to the fd or file, or
additional work before publishing:
FD_PREPARE(fdf, O_CLOEXEC, sync_file->file);
if (fdf.err) {
fput(sync_file->file);
return fdf.err;
}
data.fence = fd_prepare_fd(fdf);
if (copy_to_user((void __user *)arg, &data, sizeof(data)))
return -EFAULT;
return fd_publish(fdf);
The primitives are centered around struct fd_prepare. FD_PREPARE()
encapsulates all allocation and cleanup logic and must be followed by
a call to fd_publish() which associates the fd with the file and
installs it into the caller's fdtable. If fd_publish() isn't called,
both are deallocated automatically. FD_ADD() is a shorthand that does
fd_publish() immediately and never exposes the struct to the caller.
I've implemented this in a way that it's compatible with the cleanup
infrastructure while also being usable separately. IOW, it's centered
around struct fd_prepare which is aliased to class_fd_prepare_t and so
we can make use of all the basica guard infrastructure"
* tag 'vfs-6.19-rc1.fd_prepare.fs' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs: (42 commits)
io_uring: convert io_create_mock_file() to FD_PREPARE()
file: convert replace_fd() to FD_PREPARE()
vfio: convert vfio_group_ioctl_get_device_fd() to FD_ADD()
tty: convert ptm_open_peer() to FD_ADD()
ntsync: convert ntsync_obj_get_fd() to FD_PREPARE()
media: convert media_request_alloc() to FD_PREPARE()
hv: convert mshv_ioctl_create_partition() to FD_ADD()
gpio: convert linehandle_create() to FD_PREPARE()
pseries: port papr_rtas_setup_file_interface() to FD_ADD()
pseries: convert papr_platform_dump_create_handle() to FD_ADD()
spufs: convert spufs_gang_open() to FD_PREPARE()
papr-hvpipe: convert papr_hvpipe_dev_create_handle() to FD_PREPARE()
spufs: convert spufs_context_open() to FD_PREPARE()
net/socket: convert __sys_accept4_file() to FD_ADD()
net/socket: convert sock_map_fd() to FD_ADD()
net/kcm: convert kcm_ioctl() to FD_PREPARE()
net/handshake: convert handshake_nl_accept_doit() to FD_PREPARE()
secretmem: convert memfd_secret() to FD_ADD()
memfd: convert memfd_create() to FD_ADD()
bpf: convert bpf_token_create() to FD_PREPARE()
...
|
|
The manuals of 2K2000 says both BIT_CTRL_MODE and BYTE_CTRL_MODE are
supported but the latter is recommended. Also on 2K3000, per the ACPI
DSDT the GPIO controller is compatible with 2K2000, but it fails to
operate GPIOs 62 and 63 (and maybe others) using BIT_CTRL_MODE.
Using BYTE_CTRL_MODE also makes those 2K3000 GPIOs work.
Fixes: 3feb70a61740 ("gpio: loongson: add more gpio chip support")
Cc: stable@vger.kernel.org
Signed-off-by: Xi Ruoyao <xry111@xry111.site>
Reviewed-by: Huacai Chen <chenhuacai@loongson.cn>
Link: https://lore.kernel.org/r/20251128075033.255821-1-xry111@xry111.site
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
|
|
Link: https://patch.msgid.link/20251123-work-fd-prepare-v4-38-b6efa1706cfd@kernel.org
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
It's possible that the auxiliary proxy device we add when setting up the
GPIO controller exposing shared pins, will get matched and probed
immediately. The gpio-proxy-driver will then retrieve the shared
descriptor structure. That will cause a recursive mutex locking and
a deadlock because we're already holding the gpio_shared_lock in
gpio_device_setup_shared() and try to take it again in
devm_gpiod_shared_get() like this:
[ 4.298346] gpiolib_shared: GPIO 130 owned by f100000.pinctrl is shared by multiple consumers
[ 4.307157] gpiolib_shared: Setting up a shared GPIO entry for speaker@0,3
[ 4.314604]
[ 4.316146] ============================================
[ 4.321600] WARNING: possible recursive locking detected
[ 4.327054] 6.18.0-rc7-next-20251125-g3f300d0674f6-dirty #3887 Not tainted
[ 4.334115] --------------------------------------------
[ 4.339566] kworker/u32:3/71 is trying to acquire lock:
[ 4.344931] ffffda019ba71850 (gpio_shared_lock){+.+.}-{4:4}, at: devm_gpiod_shared_get+0x34/0x2e0
[ 4.354057]
[ 4.354057] but task is already holding lock:
[ 4.360041] ffffda019ba71850 (gpio_shared_lock){+.+.}-{4:4}, at: gpio_device_setup_shared+0x30/0x268
[ 4.369421]
[ 4.369421] other info that might help us debug this:
[ 4.376126] Possible unsafe locking scenario:
[ 4.376126]
[ 4.382198] CPU0
[ 4.384711] ----
[ 4.387223] lock(gpio_shared_lock);
[ 4.390992] lock(gpio_shared_lock);
[ 4.394761]
[ 4.394761] *** DEADLOCK ***
[ 4.394761]
[ 4.400832] May be due to missing lock nesting notation
[ 4.400832]
[ 4.407802] 5 locks held by kworker/u32:3/71:
[ 4.412279] #0: ffff000080020948 ((wq_completion)events_unbound){+.+.}-{0:0}, at: process_one_work+0x194/0x64c
[ 4.422650] #1: ffff800080963d60 (deferred_probe_work){+.+.}-{0:0}, at: process_one_work+0x1bc/0x64c
[ 4.432117] #2: ffff00008165c8f8 (&dev->mutex){....}-{4:4}, at: __device_attach+0x3c/0x198
[ 4.440700] #3: ffffda019ba71850 (gpio_shared_lock){+.+.}-{4:4}, at: gpio_device_setup_shared+0x30/0x268
[ 4.450523] #4: ffff0000810fe918 (&dev->mutex){....}-{4:4}, at: __device_attach+0x3c/0x198
[ 4.459103]
[ 4.459103] stack backtrace:
[ 4.463581] CPU: 6 UID: 0 PID: 71 Comm: kworker/u32:3 Not tainted 6.18.0-rc7-next-20251125-g3f300d0674f6-dirty #3887 PREEMPT
[ 4.463589] Hardware name: Qualcomm Technologies, Inc. Robotics RB5 (DT)
[ 4.463593] Workqueue: events_unbound deferred_probe_work_func
[ 4.463602] Call trace:
[ 4.463604] show_stack+0x18/0x24 (C)
[ 4.463617] dump_stack_lvl+0x70/0x98
[ 4.463627] dump_stack+0x18/0x24
[ 4.463636] print_deadlock_bug+0x224/0x238
[ 4.463643] __lock_acquire+0xe4c/0x15f0
[ 4.463648] lock_acquire+0x1cc/0x344
[ 4.463653] __mutex_lock+0xb8/0x840
[ 4.463661] mutex_lock_nested+0x24/0x30
[ 4.463667] devm_gpiod_shared_get+0x34/0x2e0
[ 4.463674] gpio_shared_proxy_probe+0x18/0x138
[ 4.463682] auxiliary_bus_probe+0x40/0x78
[ 4.463688] really_probe+0xbc/0x2c0
[ 4.463694] __driver_probe_device+0x78/0x120
[ 4.463701] driver_probe_device+0x3c/0x160
[ 4.463708] __device_attach_driver+0xb8/0x140
[ 4.463716] bus_for_each_drv+0x88/0xe8
[ 4.463723] __device_attach+0xa0/0x198
[ 4.463729] device_initial_probe+0x14/0x20
[ 4.463737] bus_probe_device+0xb4/0xc0
[ 4.463743] device_add+0x578/0x76c
[ 4.463747] __auxiliary_device_add+0x40/0xac
[ 4.463752] gpio_device_setup_shared+0x1f8/0x268
[ 4.463758] gpiochip_add_data_with_key+0xdac/0x10ac
[ 4.463763] devm_gpiochip_add_data_with_key+0x30/0x80
[ 4.463768] msm_pinctrl_probe+0x4b0/0x5e0
[ 4.463779] sm8250_pinctrl_probe+0x18/0x40
[ 4.463784] platform_probe+0x5c/0xa4
[ 4.463793] really_probe+0xbc/0x2c0
[ 4.463800] __driver_probe_device+0x78/0x120
[ 4.463807] driver_probe_device+0x3c/0x160
[ 4.463814] __device_attach_driver+0xb8/0x140
[ 4.463821] bus_for_each_drv+0x88/0xe8
[ 4.463827] __device_attach+0xa0/0x198
[ 4.463834] device_initial_probe+0x14/0x20
[ 4.463841] bus_probe_device+0xb4/0xc0
[ 4.463847] deferred_probe_work_func+0x90/0xcc
[ 4.463854] process_one_work+0x214/0x64c
[ 4.463860] worker_thread+0x1bc/0x360
[ 4.463866] kthread+0x14c/0x220
[ 4.463871] ret_from_fork+0x10/0x20
[ 77.265041] random: crng init done
Fortunately, at the time of creating of the auxiliary device, we already
know the correct entry so let's store it as the device's platform data.
We don't need to hold gpio_shared_lock in devm_gpiod_shared_get() as
we're not removing the entry or traversing the list anymore but we still
need to protect it from concurrent modification of its fields so add a
more fine-grained mutex.
Fixes: a060b8c511ab ("gpiolib: implement low-level, shared GPIO support")
Reported-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Closes: https://lore.kernel.org/all/fimuvblfy2cmn7o4wzcxjzrux5mwhvlvyxfsgeqs6ore2xg75i@ax46d3sfmdux/
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Tested-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20251128-gpio-shared-deadlock-v2-1-9f3ae8ddcb09@linaro.org
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
|
|
User-space must not fiddle with shared-proxy auxiliary devices. Disable
bind/unbind attributes in sysfs.
Link: https://lore.kernel.org/r/20251126191730.66277-1-brgl@bgdev.pl
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
|
|
GPIO hogs have a "gpios" property but it's not a phandle to a remote
node - it references the parent GPIO controller. We must not try to
parse it as a phandle.
Fixes: a060b8c511ab ("gpiolib: implement low-level, shared GPIO support")
Reported-by: Cosmin Tanislav <demonsingur@gmail.com>
Closes: https://lore.kernel.org/all/2d96e464-e17c-4ff5-9a08-b215b77da04f@gmail.com/
Link: https://lore.kernel.org/r/20251126-gpio-shared-fixes-v1-2-18309c0e87b5@linaro.org
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
|
|
The __symbols__ node is a special, internal node and its properties must
not be considered when scanning the device-tree for shared GPIOs.
Fixes: a060b8c511ab ("gpiolib: implement low-level, shared GPIO support")
Reported-by: Jon Hunter <jonathanh@nvidia.com>
Closes: https://lore.kernel.org/all/0829a21c-f97d-41b6-90bc-2acaec42caab@nvidia.com/
Tested-by: Jon Hunter <jonathanh@nvidia.com>
Acked-by: Jon Hunter <jonathanh@nvidia.com>
Link: https://lore.kernel.org/r/20251126-gpio-shared-fixes-v1-1-18309c0e87b5@linaro.org
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
|
|
There's an unexpected interaction between the reset-gpio driver and the
shared GPIO support. The reset-gpio device is an auxiliary device that's
created dynamically and fulfills a similar role to the gpio-shared-proxy
driver but is limited in scope to just supporting the "reset-gpios"
property.
The shared GPIO core code does not take into account that the machine
lookup entry we create when scanning the device-tree must connect the
reset-gpio device - that is the actual consumer of the GPIO and not the
consumer defined on the device tree, which in turn consumes the shared
reset control exposed by the reset-gpio device - to the GPIO controller.
We also must not skip the gpio-shared-proxy driver as it's possible that
a shared GPIO may be used by one consumer as a reset-gpios going through
the reset-gpio device and another that uses GPIOLIB.
We need to make it a special case handled in gpiolib-shared.c. Add a new
function - gpio_shared_dev_is_reset_gpio() - whose role it is to verify
if a non-matching consumer of a shared pin is a reset-gpio device and
make sure it's the right one for this pin. To that end make sure that
its parent is the GPIO controller in question and that the fwnode we
identified as sharing the pin references that controller via the
"reset-gpios" property.
Only include that code if the reset-gpio driver is enabled.
Fixes: a060b8c511ab ("gpiolib: implement low-level, shared GPIO support")
Reported-by: Val Packett <val@packett.cool>
Closes: https://lore.kernel.org/all/3b5d9df5-934d-4591-8827-6c9573a6f7ba@packett.cool/
Tested-by: Val Packett <val@packett.cool>
Tested-by: Abel Vesa <abel.vesa@linaro.org>
Link: https://lore.kernel.org/r/20251125-gpiolib-shared-reset-gpio-fix-v2-1-4eb6fa41f1dd@linaro.org
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
|
|
Merge series from Johan Hovold <johan@kernel.org>:
This series fixes device and OF node reference leaks during probe and
a clock prepare imbalance on probe failures.
Included is a related cleanup of an error path.
|
|
Use the modern PM macros for the suspend and resume functions to be
automatically dropped by the compiler when CONFIG_PM or
CONFIG_PM_SLEEP are disabled, without having to use __maybe_unused
Signed-off-by: Jisheng Zhang <jszhang@kernel.org>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Link: https://lore.kernel.org/r/20251124002105.25429-15-jszhang@kernel.org
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
|
|
Use the modern PM macros for the suspend and resume functions to be
automatically dropped by the compiler when CONFIG_PM or
CONFIG_PM_SLEEP are disabled, without having to use __maybe_unused
Signed-off-by: Jisheng Zhang <jszhang@kernel.org>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Link: https://lore.kernel.org/r/20251124002105.25429-14-jszhang@kernel.org
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
|
|
Use the modern PM macros for the suspend and resume functions to be
automatically dropped by the compiler when CONFIG_PM or
CONFIG_PM_SLEEP are disabled, without having to use __maybe_unused
Signed-off-by: Jisheng Zhang <jszhang@kernel.org>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Link: https://lore.kernel.org/r/20251124002105.25429-13-jszhang@kernel.org
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
|
|
Use the modern PM macros for the suspend and resume functions to be
automatically dropped by the compiler when CONFIG_PM or
CONFIG_PM_SLEEP are disabled, without having to use __maybe_unused
Signed-off-by: Jisheng Zhang <jszhang@kernel.org>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Link: https://lore.kernel.org/r/20251124002105.25429-12-jszhang@kernel.org
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
|
|
Use the modern PM macros for the suspend and resume functions to be
automatically dropped by the compiler when CONFIG_PM or
CONFIG_PM_SLEEP are disabled, without having to use __maybe_unused
Signed-off-by: Jisheng Zhang <jszhang@kernel.org>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20251124002105.25429-11-jszhang@kernel.org
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
|
|
Use the modern PM macros for the suspend and resume functions to be
automatically dropped by the compiler when CONFIG_PM or
CONFIG_PM_SLEEP are disabled, without having to use __maybe_unused
Signed-off-by: Jisheng Zhang <jszhang@kernel.org>
Acked-by: Andy Shevchenko <andy@kernel.org>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Link: https://lore.kernel.org/r/20251124002105.25429-10-jszhang@kernel.org
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
|
|
Use the modern PM macros for the suspend and resume functions to be
automatically dropped by the compiler when CONFIG_PM or
CONFIG_PM_SLEEP are disabled, without having to use __maybe_unused
Signed-off-by: Jisheng Zhang <jszhang@kernel.org>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Link: https://lore.kernel.org/r/20251124002105.25429-9-jszhang@kernel.org
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
|
|
Use the modern PM macros for the suspend and resume functions to be
automatically dropped by the compiler when CONFIG_PM or
CONFIG_PM_SLEEP are disabled, without having to use __maybe_unused
Signed-off-by: Jisheng Zhang <jszhang@kernel.org>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Link: https://lore.kernel.org/r/20251124002105.25429-8-jszhang@kernel.org
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
|
|
Use the modern PM macros for the suspend and resume functions to be
automatically dropped by the compiler when CONFIG_PM or
CONFIG_PM_SLEEP are disabled, without having to use __maybe_unused
Signed-off-by: Jisheng Zhang <jszhang@kernel.org>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Link: https://lore.kernel.org/r/20251124002105.25429-7-jszhang@kernel.org
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
|
|
Use the modern PM macros for the suspend and resume functions to be
automatically dropped by the compiler when CONFIG_PM or
CONFIG_PM_SLEEP are disabled, without having to use __maybe_unused
Signed-off-by: Jisheng Zhang <jszhang@kernel.org>
Acked-by: Andy Shevchenko <andy@kernel.org>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Link: https://lore.kernel.org/r/20251124002105.25429-6-jszhang@kernel.org
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
|
|
Use the modern PM macros for the suspend and resume functions to be
automatically dropped by the compiler when CONFIG_PM or
CONFIG_PM_SLEEP are disabled, without having to use #ifdef guards.
This has the advantage of always compiling these functions in,
independently of any Kconfig option. Thanks to that, bugs and other
regressions are subsequently easier to catch.
The pl061_context_save_regs structure is always embedded into struct
pl061 to simplify code, so this brings a tiny 8 bytes memory overhead
for !CONFIG_PM_SLEEP.
Signed-off-by: Jisheng Zhang <jszhang@kernel.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Link: https://lore.kernel.org/r/20251124002105.25429-5-jszhang@kernel.org
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
|
|
Use the modern PM macros for the suspend and resume functions to be
automatically dropped by the compiler when CONFIG_PM or
CONFIG_PM_SLEEP are disabled, without having to use #ifdef guards.
This has the advantage of always compiling these functions in,
independently of any Kconfig option. Thanks to that, bugs and other
regressions are subsequently easier to catch.
Signed-off-by: Jisheng Zhang <jszhang@kernel.org>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Link: https://lore.kernel.org/r/20251124002105.25429-4-jszhang@kernel.org
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
|
|
Use the modern PM macros for the suspend and resume functions to be
automatically dropped by the compiler when CONFIG_PM or
CONFIG_PM_SLEEP are disabled, without having to use #ifdef guards.
This has the advantage of always compiling these functions in,
independently of any Kconfig option. Thanks to that, bugs and other
regressions are subsequently easier to catch.
Signed-off-by: Jisheng Zhang <jszhang@kernel.org>
Acked-by: Doug Berger <opendmb@gmail.com>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20251124002105.25429-3-jszhang@kernel.org
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
|
|
Use the modern PM macros for the suspend and resume functions to be
automatically dropped by the compiler when CONFIG_PM or
CONFIG_PM_SLEEP are disabled, without having to use #ifdef guards.
This has the advantage of always compiling these functions in,
independently of any Kconfig option. Thanks to that, bugs and other
regressions are subsequently easier to catch.
Signed-off-by: Jisheng Zhang <jszhang@kernel.org>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Link: https://lore.kernel.org/r/20251124002105.25429-2-jszhang@kernel.org
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/andy/linux-gpio-intel into gpio/for-next
intel-gpio for v6.19-1
* Replace min_t() by min() to avoid cutting upper bits and do type checking
gpiolib: acpi: use min() instead of min_t()
|
|
into gpio/for-next
Reset/GPIO/swnode changes for v6.19
* Extend software node implementation, allowing its properties to reference
existing firmware nodes.
* Update the GPIO property interface to use reworked swnode macros.
* Rework reset-gpio code to use GPIO lookup via swnode.
* Fix spi-cs42l43 driver to work with swnode changes.
|
|
When doing a software node lookup, we require both the fwnode that
references a GPIO chip as well as the node associated with that chip to
be software nodes. However, we now allow referencing generic firmware
nodes from software nodes in driver core so we should allow the same in
GPIO core. Make the software node name check optional and dependent on
whether the referenced firmware node is a software node. If it's not,
just continue with the lookup.
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
|
|
Currently, during suspend, do nothing; during resume, just sync the
regmap cache to hw regs.
Signed-off-by: Jisheng Zhang <jszhang@kernel.org>
Link: https://lore.kernel.org/r/20251119140455.10096-1-jszhang@kernel.org
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
|
|
The 16Z034 and 16Z037 are 8 bits GPIO controllers that share the
same registers and features of the 16Z127 GPIO controller.
Signed-off-by: Jose Javier Rodriguez Barbarin <dev-josejavier.rodriguez@duagon.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20251118083115.9545-1-dev-josejavier.rodriguez@duagon.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
|
|
Merge series from Bartosz Golaszewski <brgl@bgdev.pl>:
Problem statement: GPIOs are implemented as a strictly exclusive
resource in the kernel but there are lots of platforms on which single
pin is shared by multiple devices which don't communicate so need some
way of properly sharing access to a GPIO. What we have now is the
GPIOD_FLAGS_BIT_NONEXCLUSIVE flag which was introduced as a hack and
doesn't do any locking or arbitration of access - it literally just hand
the same GPIO descriptor to all interested users.
The proposed solution is composed of three major parts: the high-level,
shared GPIO proxy driver that arbitrates access to the shared pin and
exposes a regular GPIO chip interface to consumers, a low-level shared
GPIOLIB module that scans firmware nodes and creates auxiliary devices
that attach to the proxy driver and finally a set of core GPIOLIB
changes that plug the former into the GPIO lookup path.
The changes are implemented in a way that allows to seamlessly compile
out any code related to sharing GPIOs for systems that don't need it.
The practical use-case for this are the powerdown GPIOs shared by
speakers on Qualcomm db845c platform, however I have also extensively
tested it using gpio-virtuser on arm64 qemu with various DT
configurations.
|
|
min_t(u16, a, b) casts an 'unsigned long' to 'u16'.
Use min(a, b) instead as it promotes the both values to int
and so cannot discard significant bits.
In this case the values should be ok.
Detected by an extra check added to min_t().
Signed-off-by: David Laight <david.laight.linux@gmail.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
|
|
Since PCI device should not be abusing platform device, MFD parent to
platform child path is no longer being pursued for this driver. Convert
it to auxiliary driver, which will be used by EHL PSE auxiliary device.
Signed-off-by: Raag Jadav <raag.jadav@intel.com>
Acked-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20251112034040.457801-3-raag.jadav@intel.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
|
|
With the final call to fput() on a file descriptor, the release action
may be deferred and scheduled on a work queue. The reference count of
that descriptor is still zero and it must not be used. It's possible
that a GPIO change, we want to notify the user-space about, happens
AFTER the reference count on the file descriptor associated with the
character device went down to zero but BEFORE the .release() callback
was called from the workqueue and so BEFORE we unregistered from the
notifier.
Using the regular get_file() routine in this situation triggers the
following warning:
struct file::f_count incremented from zero; use-after-free condition present!
So use the get_file_active() variant that will return NULL on file
descriptors that have been or are being released.
Fixes: 40b7c49950bd ("gpio: cdev: put emitting the line state events on a workqueue")
Reported-by: Alexander Sverdlin <alexander.sverdlin@siemens.com>
Closes: https://lore.kernel.org/all/5d605f7fc99456804911403102a4fe999a14cc85.camel@siemens.com/
Tested-by: Alexander Sverdlin <alexander.sverdlin@siemens.com>
Link: https://lore.kernel.org/r/20251117-gpio-cdev-get-file-v1-1-28a16b5985b8@linaro.org
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
|
|
While this function is supposed to be used by all scanning functions, so
far we only have a single one for OF trees. Once we add support for ACPI
and software nodes, we'll drop the CONFIG_OF guard around this routine
but in order to avoid build warnings, let's extend it to cover it in the
meantime.
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202511180232.EItKeYjY-lkp@intel.com/
Link: https://lore.kernel.org/r/20251118-gpiolib-shared-of-guard-v1-1-e4ef149a2e0b@linaro.org
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
|
|
The fact that CONFIG_OF is enabled does not mean that the device tree is
populated and that of_root points to a valid device node. Check if it's
NULL before trying to traverse the tree.
Fixes: a060b8c511ab ("gpiolib: implement low-level, shared GPIO support")
Reported-by: Mark Brown <broonie@kernel.org>
Closes: https://lore.kernel.org/all/dbe20642-9662-40af-a593-c1263baea73b@sirena.org.uk/
Tested-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20251118200459.13969-1-brgl@bgdev.pl
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
|
|
On Tegra410, Compute and System GPIOs have same port names. This
results in the same GPIO names for both Compute and System GPIOs
during initialization in `tegra186_gpio_probe()`, which results in
following warnings:
kernel: gpio gpiochip1: Detected name collision for GPIO name 'PA.00'
kernel: gpio gpiochip1: Detected name collision for GPIO name 'PA.01'
kernel: gpio gpiochip1: Detected name collision for GPIO name 'PA.02'
kernel: gpio gpiochip1: Detected name collision for GPIO name 'PB.00'
kernel: gpio gpiochip1: Detected name collision for GPIO name 'PB.01'
...
Add GPIO name prefix in the SoC data and use it to initialize the GPIO
name.
Port names remain unchanged for previous SoCs. On Tegra410, Compute
GPIOs are named COMPUTE-P<PORT>.GPIO, and System GPIOs are named
SYSTEM-P<PORT>.GPIO.
Fixes: 9631a10083d8 ("gpio: tegra186: Add support for Tegra410")
Signed-off-by: Kartik Rajput <kkartik@nvidia.com>
Acked-by: Thierry Reding <treding@nvidia.com>
Reviewed-by: Jon Hunter <jonathanh@nvidia.com>
Link: https://lore.kernel.org/r/20251113163112.885900-1-kkartik@nvidia.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
|
|
Allow to kill devm_gpio_request_one() independently by converting it
to use legacy APIs that will be alive a bit longer.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20251112093608.1481030-3-andriy.shevchenko@linux.intel.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
|
|
Make sure we kill gpio_request_one() first by converting it to
use legacy APIs that will be alive a bit longer. In particular,
this also shows the code we will use in another function to make
it die independently.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20251112093608.1481030-2-andriy.shevchenko@linux.intel.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux.git into gpio/for-next
Immutable branch between the GPIO, ASoC and regulator trees for v6.19-rc1
Add better support for GPIOs shared by multiple consumers.
|
|
Provide an interface allowing consumers to check if a GPIO descriptor
represents a GPIO that can potentially be shared by multiple consumers
at the same time. This is exposed to allow subsystems that already
work around the limitations of the current non-exclusive GPIO handling
in some ways, to gradually convert to relying on the new shared GPIO
feature of GPIOLIB.
Extend the gpiolib-shared module to mark the GPIO shared proxy
descriptors with a flag checked by the new interface.
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20251112-gpio-shared-v4-6-b51f97b1abd8@linaro.org
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
|
|
As the final step in adding official support for shared GPIOs, enable
the previously added elements in core GPIO subsystem code. Set-up shared
GPIOs when adding a GPIO chip, tear it down on removal and check if a
GPIO descriptor looked up during the firmware-node stage is shared and
fall-back to machine lookup in this case.
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20251112-gpio-shared-v4-5-b51f97b1abd8@linaro.org
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
|
|
Add a virtual GPIO proxy driver which arbitrates access to a single
shared GPIO by multiple users. It works together with the core shared
GPIO support from GPIOLIB and functions by acquiring a reference to a
shared GPIO descriptor exposed by gpiolib-shared and making sure that
the state of the GPIO stays consistent.
In general: if there's only one user at the moment: allow it to do
anything as if this was a normal GPIO (in essence: just propagate calls
to the underlying real hardware driver). If there are more users: don't
allow to change the direction set by the initial user, allow to change
configuration options but warn about possible conflicts and finally:
treat the output-high value as a reference counted, logical "GPIO
enabled" setting, meaning: the GPIO value is set to high when the first
user requests it to be high and back to low once the last user stops
"voting" for high.
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20251112-gpio-shared-v4-4-b51f97b1abd8@linaro.org
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
|
|
This module scans the device tree (for now only OF nodes are supported
but care is taken to make other fwnode implementations easy to
integrate) and determines which GPIO lines are shared by multiple users.
It stores that information in memory. When the GPIO chip exposing shared
lines is registered, the shared GPIO descriptors it exposes are marked
as shared and virtual "proxy" devices that mediate access to the shared
lines are created. When a consumer of a shared GPIO looks it up, its
fwnode lookup is redirected to a just-in-time machine lookup that points
to this proxy device.
This code can be compiled out on platforms which don't use shared GPIOs.
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20251112-gpio-shared-v4-3-b51f97b1abd8@linaro.org
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
|
|
Define a new GPIO descriptor flag for marking pins that are shared by
multiple consumer. This flag will be used in several places so we need
to do it in advance and separately from other changes.
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20251112-gpio-shared-v4-2-b51f97b1abd8@linaro.org
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
|
|
Several drivers can benefit from registering per-instance data along
with the syscore operations. To achieve this, move the modifiable fields
out of the syscore_ops structure and into a separate struct syscore that
can be registered with the framework. Add a void * driver data field for
drivers to store contextual data that will be passed to the syscore ops.
Acked-by: Rafael J. Wysocki (Intel) <rafael@kernel.org>
Signed-off-by: Thierry Reding <treding@nvidia.com>
|
|
tb10x_set_bits() is not referenced anywhere leading to W=1 warning:
gpio-tb10x.c:59:20: error: unused function 'tb10x_set_bits' [-Werror,-Wunused-function]
After its removal, tb10x_reg_write() becomes unused as well.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20251106-gpio-of-match-v1-1-50c7115a045e@linaro.org
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
|
|
Currently if a user enqueue a work item using schedule_delayed_work() the
used wq is "system_wq" (per-cpu wq) while queue_delayed_work() use
WORK_CPU_UNBOUND (used when a cpu is not specified). The same applies to
schedule_work() that is using system_wq and queue_work(), that makes use
again of WORK_CPU_UNBOUND.
This lack of consistency cannot be addressed without refactoring the API.
system_wq should be the per-cpu workqueue, yet in this name nothing makes
that clear, so replace system_wq with system_percpu_wq.
The old wq (system_wq) will be kept for a few release cycles.
Suggested-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Marco Crivellari <marco.crivellari@suse.com>
Link: https://lore.kernel.org/r/20251031111628.143924-2-marco.crivellari@suse.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
|
|
Restore the set_config operation, as it was lost during the refactoring of
the gpio-aggregator driver while creating the gpio forwarder library.
Fixes: b31c68fd851e7 ("gpio: aggregator: handle runtime registration of gpio_desc in gpiochip_fwd")
Reported-by: kernel test robot <oliver.sang@intel.com>
Closes: https://lore.kernel.org/oe-lkp/202509281206.a7334ae8-lkp@intel.com
Signed-off-by: Thomas Richard <thomas.richard@bootlin.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20250929-gpio-aggregator-fix-set-config-callback-v1-1-39046e1da609@bootlin.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
|
