summaryrefslogtreecommitdiff
path: root/drivers/gpu/drm/amd/display
AgeCommit message (Collapse)Author
2025-10-07drm/amd/display: Properly disable scaling on DCE6Timur Kristóf
SCL_SCALER_ENABLE can be used to enable/disable the scaler on DCE6. Program it to 0 when scaling isn't used, 1 when used. Additionally, clear some other registers when scaling is disabled and program the SCL_UPDATE register as recommended. This fixes visible glitches for users whose BIOS sets up a mode with scaling at boot, which DC was unable to clean up. Fixes: b70aaf5586f2 ("drm/amd/display: dce_transform: add DCE6 specific macros,functions") Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Timur Kristóf <timur.kristof@gmail.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-10-07drm/amd/display: Properly clear SCL_*_FILTER_CONTROL on DCE6Timur Kristóf
Previously, the code would set a bit field which didn't exist on DCE6 so it would be effectively a no-op. Fixes: b70aaf5586f2 ("drm/amd/display: dce_transform: add DCE6 specific macros,functions") Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Timur Kristóf <timur.kristof@gmail.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-10-07drm/amd/display: Add missing DCE6 SCL_HORZ_FILTER_INIT* SRIsTimur Kristóf
Without these, it's impossible to program these registers. Fixes: 102b2f587ac8 ("drm/amd/display: dce_transform: DCE6 Scaling Horizontal Filter Init (v2)") Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Timur Kristóf <timur.kristof@gmail.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-09-25drm/amd/display: Share dce100_validate_global with DCE6-8Timur Kristóf
The dce100_validate_global function was verbatim exactly the same as dce60_validate_global and dce80_validate_global. Share dce100_validate_global between DCE6-10 to save code size. Signed-off-by: Timur Kristóf <timur.kristof@gmail.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-09-25drm/amd/display: Share dce100_validate_bandwidth with DCE6-8Timur Kristóf
DCE6-8 have very similar capabilities to DCE10, they support the same DP and HDMI versions and work similarly. Share dce100_validate_bandwidth between DCE6-10 to reduce code duplication in the DC driver. Signed-off-by: Timur Kristóf <timur.kristof@gmail.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-09-25drm/amd/display: Reject modes with too high pixel clock on DCE6-10Timur Kristóf
Reject modes with a pixel clock higher than the maximum display clock. Use 400 MHz as a fallback value when the maximum display clock is not known. Pixel clocks that are higher than the display clock just won't work and are not supported. With the addition of the YUV422 fallback, DC can now accidentally select a mode requiring higher pixel clock than actually supported when the DP version supports the required bandwidth but the clock is otherwise too high for the display engine. DCE 6-10 don't support these modes but they don't have a bandwidth calculation to reject them properly. Fixes: db291ed1732e ("drm/amd/display: Add fallback path for YCBCR422") Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Timur Kristóf <timur.kristof@gmail.com> Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-09-25drm/amd/display: Only enable common modes for eDP and LVDSMario Limonciello
[Why] The main reason common modes are added is for compatibility with clone mode when a laptop is connected to a projector or external monitor. Since commit 978fa2f6d0b12 ("drm/amd/display: Use scaling for non-native resolutions on eDP") when non-native modes are picked for eDP the GPU scalar will be used. This is because it is inconsistent whether eDP panels have the capability to actually drive non-native resolutions. With panels connected to other connectors this limitation generally doesn't exist as we the EDID will advertise support for a number of resolutions and monitors will use built in scaling hardware. Comparing DC and non-DC code paths the non-DC code path only adds common modes for LVDS and eDP whereas the DC codepath does it for all connector types. In the past there was an experiment done to disable common mode adding for eDP and LVDS from commit 6d396e7ac1ce3 ("drm/amd/display: Disable common modes for LVDS") and commit 7948afb46af92 ("drm/amd/display: Disable common modes for eDP") but this was reverted in commit a8b79b09185de ("drm/amd: Re-enable common modes for eDP and LVDS") because it caused problems with Xorg. [How] Only add common modes for eDP and LVDS for DC, matching the behavior of non-DC. Suggested-by: Timur Kristóf <timur.kristof@gmail.com> Reviewed-by: Harry Wentland <harry.wentland@amd.com> Reviewed-by: Timur Kristóf <timur.kristof@gmail.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Link: https://lore.kernel.org/r/20250924161624.1975819-2-mario.limonciello@amd.com Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-09-23drm/amd/display: remove output_tf_change flagMelissa Wen
Remove this flag as the driver stopped managing it individually since commit a4056c2a6344 ("drm/amd/display: use HW hdr mult for brightness boost"). After some back and forth it was reintroduced as a condition to `set_output_transfer_func()` in [1]. Without direct management, this flag only changes value when all surface update flags are set true on UPDATE_TYPE_FULL with no output TF status meaning. Fixes: bb622e0c0044 ("drm/amd/display: program output tf when required") [1] Signed-off-by: Melissa Wen <mwen@igalia.com> Reviewed-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-09-23drm/amd/display: Optimize remove_duplicates() from O(N^2) to O(N)Kuan-Wei Chiu
Replace the previous O(N^2) implementation of remove_duplicates() with a O(N) version using a fast/slow pointer approach. The new version keeps only the first occurrence of each element and compacts the array in place, improving efficiency without changing functionality. Signed-off-by: Kuan-Wei Chiu <visitorckw@gmail.com> Reviewed-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-09-23drm/amd/display: change dc stream color settings only in atomic commitMelissa Wen
Don't update DC stream color components during atomic check. The driver will continue validating the new CRTC color state but will not change DC stream color components. The DC stream color state will only be programmed at commit time in the `atomic_setup_commit` stage. It fixes gamma LUT loss reported by KDE users when changing brightness quickly or changing Display settings (such as overscan) with nightlight on and HDR. As KWin can do a test commit with color settings different from those that should be applied in a non-test-only commit, if the driver changes DC stream color state in atomic check, this state can be eventually HW programmed in commit tail, instead of the respective state set by the non-blocking commit. Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/4444 Reported-by: Xaver Hugl <xaver.hugl@gmail.com> Signed-off-by: Melissa Wen <mwen@igalia.com> Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-09-23drm/amd/display: update color on atomic commit timeMelissa Wen
Use `atomic_commit_setup` to change the DC stream state. It's a preparation to remove from `atomic_check` changes in CRTC color components of DC stream state and prevent DC to commit TEST_ONLY changes. Link: https://gitlab.freedesktop.org/drm/amd/-/issues/4444 Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Melissa Wen <mwen@igalia.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-09-23drm/amd/display: Promote DC to 3.2.351Taimur Hassan
- Disable stutter when programming watermarks on dcn32 - Improve brightness calculations - Fix saving vbios clocks during init for DCN314 - Enable DTM 3 on DCN3.1+ dGPUs - Add new ultra sleep field in DMUB - Isolate DCN401 SMU functions - Refactor and add logging of SMU functions. - Add dccg logging - Fix DCN35 clocks initialization Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by: Taimur Hassan <Syed.Hassan@amd.com> Signed-off-by: Ivan Lipski <ivan.lipski@amd.com> Tested-by: Dan Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-09-23drm/amd/display: [FW Promotion] Release 0.1.28.0Taimur Hassan
Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by: Taimur Hassan <Syed.Hassan@amd.com> Signed-off-by: Ivan Lipski <ivan.lipski@amd.com> Tested-by: Dan Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-09-23drm/amd/display: Init DCN35 clocks from pre-os HW valuesLeo Li
[Why] We did not initialize dc clocks with boot-time hw values during init. This lead to incorrect clock values in dc, causing `dcn35_update_clocks` to make incorrect updates. [How] Correctly initialize DC with pre-os clk values from HW. s/dump/save/ as that accurately reflects the purpose of the functions. Fixes: 8774029f76b9 ("drm/amd/display: Add DCN35 CLK_MGR") Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Fangzhi Zuo <Jerry.Zuo@amd.com> Signed-off-by: Ivan Lipski <ivan.lipski@amd.com> Tested-by: Dan Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-09-23drm/amd/display: Revert "correct sw cache timing to ensure dispclk ramping"Charlene Liu
[why] Need consider SSC enabled case This reverts commit f1fd8a9ac2aa5118f76baf28e6ca4d6962a485be. Reviewed-by: Ovidiu (Ovi) Bunea <ovidiu.bunea@amd.com> Reviewed-by: Chris Park <chris.park@amd.com> Signed-off-by: Charlene Liu <Charlene.Liu@amd.com> Signed-off-by: Ivan Lipski <ivan.lipski@amd.com> Tested-by: Dan Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-09-23drm/amd/display: Correct sw cache timing to ensure dispclk rampingCharlene Liu
[why] Current driver will cache the dispclk right after send cmd to pmfw, but actual clock not reached yet. Change to only cache the dispclk setting after HW reached to the real clock. Also give some range as it might be in bypass clock setting. Reviewed-by: Yihan Zhu <yihan.zhu@amd.com> Signed-off-by: Charlene Liu <Charlene.Liu@amd.com> Signed-off-by: Ivan Lipski <ivan.lipski@amd.com> Tested-by: Dan Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-09-23drm/amd/display: Insert dccg log for easy debugCharlene Liu
[why] Log for sequence tracking Reviewed-by: Ovidiu (Ovi) Bunea <ovidiu.bunea@amd.com> Reviewed-by: Yihan Zhu <yihan.zhu@amd.com> Signed-off-by: Charlene Liu <Charlene.Liu@amd.com> Signed-off-by: Ivan Lipski <ivan.lipski@amd.com> Tested-by: Dan Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-09-23drm/amd/display: Remove wm_optimized_requiredDillon Varone
[WHY&HOW] This is a redundant field that is identically to optimized_required, so just replace it. Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by: Dillon Varone <Dillon.Varone@amd.com> Signed-off-by: Ivan Lipski <ivan.lipski@amd.com> Tested-by: Dan Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-09-23drm/amd/display: Set wm_pending when disable stutter w/a usedDillon Varone
[WHY&HOW] When stutter is disabled prior to watermark programming due to a w/a, wm_pending should be returned as true. Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by: Dillon Varone <Dillon.Varone@amd.com> Signed-off-by: Ivan Lipski <ivan.lipski@amd.com> Tested-by: Dan Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-09-23drm/amd/display: Refactor SMU tracingDillon Varone
[WHY&HOW] Add new tracing and performance measurements for SMU messaging. Reviewed-by: Alvin Lee <alvin.lee2@amd.com> Signed-off-by: Dillon Varone <Dillon.Varone@amd.com> Signed-off-by: Ivan Lipski <ivan.lipski@amd.com> Tested-by: Dan Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-09-23drm/amd/display: Isolate dcn401 SMU functionsDillon Varone
[WHY&HOW] SMU interfaces are not backwards and forwards compatible, so they should be isolated per version. Reviewed-by: Alvin Lee <alvin.lee2@amd.com> Signed-off-by: Dillon Varone <Dillon.Varone@amd.com> Signed-off-by: Ivan Lipski <ivan.lipski@amd.com> Tested-by: Dan Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-09-23drm/amd/display: Add fast sync field in ultra sleep more for DMUBAllen Li
[Why&How] We need to inform DMUB whether fast sync in ultra sleep mode is supported, so that it can disable desync error detection when the it is not enabled. This helps prevent unexpected desync errors when transitioning out of ultra sleep mode. Add fast sync in ultra sleep mode field in replay copy setting command. Reviewed-by: Robin Chen <robin.chen@amd.com> Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Signed-off-by: Allen Li <wei-guang.li@amd.com> Signed-off-by: Ivan Lipski <ivan.lipski@amd.com> Tested-by: Dan Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-09-23drm/amd/display: Use mpc.preblend flag to indicate preblendAlvin Lee
[Description] Modifications in per asic capability means mpc.preblend flag should be used to indicate preblend. Update relevant paths to use this flag. Fixes: 39923050615c ("drm/amd/display: Clear DPP 3DLUT Cap") Reviewed-by: Dillon Varone <dillon.varone@amd.com> Signed-off-by: Alvin Lee <Alvin.Lee2@amd.com> Signed-off-by: Ivan Lipski <ivan.lipski@amd.com> Tested-by: Dan Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-09-23drm/amd/display: Fix for test crash due to power gatingSridevi Arvindekar
[Why/How] Call power gating routine only if it is defined. Reviewed-by: Alvin Lee <alvin.lee2@amd.com> Signed-off-by: Sridevi Arvindekar <sarvinde@amd.com> Signed-off-by: Ivan Lipski <ivan.lipski@amd.com> Tested-by: Dan Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-09-23drm/amd/display: Enable DTM v3 on dGPUs with DCN 3.1+Ivan Lipski
[Why&How] Right now, only selected APUs have enabled DTM v3, which allows to use newer firmware for content protection. We want to enable it on the dGPUs starting with DCN 3.2 Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by: Ivan Lipski <ivan.lipski@amd.com> Tested-by: Dan Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-09-23drm/amd/display: Init dispclk from bootup clock for DCN314Lo-an Chen
[Why] Driver does not pick up and save vbios's clocks during init clocks, the dispclk in clk_mgr will keep 0 until the first update clocks. In some cases, OS changes the timing in the second set mode (lower the pixel clock), causing the driver to lower the dispclk in prepare bandwidth, which is illegal and causes grey screen. [How] 1. Dump and save the vbios's clocks, and init the dispclk in dcn314_init_clocks. 2. Fix the condition in dcn314_update_clocks, regarding a 0kHz value. Reviewed-by: Charlene Liu <charlene.liu@amd.com> Signed-off-by: Lo-an Chen <lo-an.chen@amd.com> Signed-off-by: Ivan Lipski <ivan.lipski@amd.com> Tested-by: Dan Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-09-23drm/amd/display: Handle interpolation for first data pointMario Limonciello
[Why] If the first data point for a custom brightness curve is not 0% luminance then the first few luminance values will be ignored. [How] Check signal is below first data point and if so do linear interpolation to 0 instead. Reviewed-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Signed-off-by: Ivan Lipski <ivan.lipski@amd.com> Tested-by: Dan Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-09-23drm/amd/display: Add monitor patch to read psr cap againPaul Hsieh
[Why & How] According to the vendor’s requirement, after each OUI write, the PSR cap must be read; otherwise, the vendor will default to using PSRSU. But its PSR cap indicates that it only supports PSR1. Reviewed-by: Wenjing Liu <wenjing.liu@amd.com> Signed-off-by: Paul Hsieh <Paul.Hsieh@amd.com> Signed-off-by: Ivan Lipski <ivan.lipski@amd.com> Tested-by: Dan Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-09-23drm/amd/display: Add AVI infoframe copy in copy_stream_update_to_streamKarthi Kandasamy
[WHY] Ensure AVI infoframe updates from stream updates are applied to the active stream so OS overrides are not lost. [HOW] Copy avi_infopacket to stream when valid flag is set. Follow existing infopacket copy pattern and perform a basic validity check before assignment. Reviewed-by: Aric Cyr <aric.cyr@amd.com> Signed-off-by: Karthi Kandasamy <karthi.kandasamy@amd.com> Signed-off-by: Ivan Lipski <ivan.lipski@amd.com> Tested-by: Dan Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-09-23drm/amd/display: Add missing post flip callsDillon Varone
[WHY&HOW] dc_post_update_surfaces_to_stream needs to be called after a full update completes in order to optimize clocks and watermarks for power. Add missing calls before idle entry is requested to ensure optimal power. Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by: Dillon Varone <Dillon.Varone@amd.com> Signed-off-by: Ivan Lipski <ivan.lipski@amd.com> Tested-by: Dan Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-09-23drm/amd/display: Disable stutter when programming watermarks on dcn32Dillon Varone
[WHY&HOW] Reprogramming watermarks with stutter allowed can cause instability on some ASICs. Disable it prior to raising watermarks (prepare bandwidth), then re-enable after lowering (optimize bandwidth). Reviewed-by: Alvin Lee <Alvin.Lee2@amd.com> Signed-off-by: Dillon Varone <Dillon.Varone@amd.com> Signed-off-by: Ivan Lipski <ivan.lipski@amd.com> Tested-by: Dan Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-09-22Merge tag 'amd-drm-next-6.18-2025-09-19' of ↵Dave Airlie
https://gitlab.freedesktop.org/agd5f/linux into drm-next amd-drm-next-6.18-2025-09-19: amdgpu: - Fence drv clean up fix - DPC fixes - Misc display fixes - Support the MMIO remap page as a ttm pool - JPEG parser updates - UserQ updates - VCN ctx handling fixes - Documentation updates - Misc cleanups - SMU 13.0.x updates - SI DPM updates - GC 11.x cleaner shader updates - DMCUB updates - DML fixes - Improve fallback handling for pixel encoding - VCN reset improvements - DCE6 DC updates - DSC fixes - Use devm for i2c buses - GPUVM locking updates - GPUVM documentation improvements - Drop non-DC DCE11 code - S0ix fixes - Backlight fix - SR-IOV fixes amdkfd: - SVM updates Signed-off-by: Dave Airlie <airlied@redhat.com> From: Alex Deucher <alexander.deucher@amd.com> Link: https://lore.kernel.org/r/20250919193354.2989255-1-alexander.deucher@amd.com
2025-09-18drm/amd/display: Only restore backlight after amdgpu_dm_init or dm_resumeMatthew Schwartz
On clients that utilize AMD_PRIVATE_COLOR properties for HDR support, brightness sliders can include a hardware controlled portion and a gamma-based portion. This is the case on the Steam Deck OLED when using gamescope with Steam as a client. When a user sets a brightness level while HDR is active, the gamma-based portion and/or hardware portion are adjusted to achieve the desired brightness. However, when a modeset takes place while the gamma-based portion is in-use, restoring the hardware brightness level overrides the user's overall brightness level and results in a mismatch between what the slider reports and the display's current brightness. To avoid overriding gamma-based brightness, only restore HW backlight level after boot or resume. This ensures that the backlight level is set correctly after the DC layer resets it while avoiding interference with subsequent modesets. Fixes: 7875afafba84 ("drm/amd/display: Fix brightness level not retained over reboot") Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/4551 Signed-off-by: Matthew Schwartz <matthew.schwartz@linux.dev> Reviewed-by: Mario Limonciello <mario.limonciello@amd.com> Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-09-16drm/amd/display: Use devm_i2c_add_adapter to simplify i2c cleanup logicRodrigo Siqueira
This commit replaces the utilization of i2c_add/del_adapter() with devm_i2c_add_adapter() to reduce the amount of boilerplate. Using devm_i2c_add_adapter() has the advantage of removing the manual manipulation of the I2C adapter. Suggested-by: Robert Beckett <bob.beckett@collabora.com> Signed-off-by: Rodrigo Siqueira <siqueira@igalia.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-09-16drm/amd/display: Use kmalloc_array() instead of kmalloc()James Flowers
Documentation/process/deprecated.rst recommends against the use of kmalloc with dynamic size calculations due to the risk of overflow and smaller allocation being made than the caller was expecting. This could lead to buffer overflow in code similar to the memcpy in amdgpu_dm_plane_add_modifier(). Signed-off-by: James Flowers <bold.zone2373@fastmail.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-09-15drm/amd/display: Don't use non-registered VUPDATE on DCE 6Timur Kristóf
The VUPDATE interrupt isn't registered on DCE 6, so don't try to use that. This fixes a page flip timeout after sleep/resume on DCE 6. Signed-off-by: Timur Kristóf <timur.kristof@gmail.com> Reviewed-by: Rodrigo Siqueira <siqueira@igalia.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-09-15drm/amd/display: Disable VRR on DCE 6Timur Kristóf
DCE 6 was not advertised as being able to support VRR, so let's mark it as unsupported for now. The VRR implementation in amdgpu_dm depends on the VUPDATE interrupt which is not registered for DCE 6. Signed-off-by: Timur Kristóf <timur.kristof@gmail.com> Reviewed-by: Rodrigo Siqueira <siqueira@igalia.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-09-15drm/amd/display: Disable fastboot on DCE 6 tooTimur Kristóf
It already didn't work on DCE 8, so there is no reason to assume it would on DCE 6. Signed-off-by: Timur Kristóf <timur.kristof@gmail.com> Reviewed-by: Rodrigo Siqueira <siqueira@igalia.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-09-15drm/amd/display/dml2: Guard dml21_map_dc_state_into_dml_display_cfg with ↵Xi Ruoyao
DC_FP_START dml21_map_dc_state_into_dml_display_cfg calls (the call is usually inlined by the compiler) populate_dml21_surface_config_from_plane_state and populate_dml21_plane_config_from_plane_state which may use FPU. In a x86-64 build: $ objdump --disassemble=dml21_map_dc_state_into_dml_display_cfg \ > drivers/gpu/drm/amd/display/dc/dml2/dml21/dml21_translation_helper.o | > grep %xmm -c 63 Thus it needs to be guarded with DC_FP_START. But we must note that the current code quality of the in-kernel FPU use in AMD dml2 is very much problematic: we are actually calling DC_FP_START in dml21_wrapper.c here, and this translation unit is built with CC_FLAGS_FPU. Strictly speaking this does not make any sense: with CC_FLAGS_FPU the compiler is allowed to generate FPU uses anywhere in the translated code, perhaps out of the DC_FP_START guard. This problematic pattern also occurs in at least dml2_wrapper.c, dcn35_fpu.c, and dcn351_fpu.c. Thus we really need a careful audit and refactor for the in-kernel FPU uses, and this patch is simply whacking a mole. However per the reporter, whacking this mole is enough to make a 9060XT "just work." Reported-by: Asiacn <710187964@qq.com> Closes: https://github.com/loongson-community/discussions/issues/102 Tested-by: Asiacn <710187964@qq.com> Signed-off-by: Xi Ruoyao <xry111@xry111.site> Reviewed-by: Huacai Chen <chenhuacai@loongson.cn> Reviewed-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-09-15drm/amd/display: Keep PLL0 running on DCE 6.0 and 6.4Timur Kristóf
DC can turn off the display clock when no displays are connected or when all displays are off, for reference see: - dce*_validate_bandwidth DC also assumes that the DP clock is always on and never powers it down, for reference see: - dce110_clock_source_power_down In case of DCE 6.0 and 6.4, PLL0 is the clock source for both the engine clock and DP clock, for reference see: - radeon_atom_pick_pll - atombios_crtc_set_disp_eng_pll Therefore, PLL0 should be always kept running on DCE 6.0 and 6.4. This commit achieves that by ensuring that by setting the display clock to the corresponding value in low power state instead of zero. This fixes a page flip timeout on SI with DC which happens when all connected displays are blanked. Signed-off-by: Timur Kristóf <timur.kristof@gmail.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-09-15drm/amd/display: Fix DVI-D/HDMI adaptersTimur Kristóf
When the EDID has the HDMI bit, we should simply select the HDMI signal type even on DVI ports. For reference see, the legacy amdgpu display code: amdgpu_atombios_encoder_get_encoder_mode which selects ATOM_ENCODER_MODE_HDMI for the same case. This commit fixes DVI connectors to work with DVI-D/HDMI adapters so that they can now produce output over these connectors for HDMI monitors with higher bandwidth modes. With this change, even HDMI audio works through DVI. For testing, I used a CAA-DMDHFD3 DVI-D/HDMI adapter with the following GPUs: Tahiti (DCE 6) - DC can now output 4K 30 Hz over DVI Polaris 10 (DCE 11.2) - DC can now output 4K 60 Hz over DVI Signed-off-by: Timur Kristóf <timur.kristof@gmail.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-09-15drm/amd/display: Promote DC to 3.2.350Taimur Hassan
This version brings along following updates: - Add DSC padding for OVT support - Setup pixel encoding for YCBCR422 - Fix dml ms order - Rename header file link.h to link_service.h - Fix DMUB loading sequence - Modify link training policy Signed-off-by: Taimur Hassan <Syed.Hassan@amd.com> Acked-by: Wayne Lin <Wayne.Lin@amd.com> Signed-off-by: Ray Wu <ray.wu@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-09-15Revert "drm/amd/display: Reduce Stack Usage by moving 'audio_output' into ↵Martin Leung
'stream_res' v4" This reverts commit 1cf1205ef268 ("drm/amd/display: Reduce Stack Usage by moving 'audio_output' into 'stream_res' v4") Reason for revert: Causes DP compliance errors Acked-by: Wayne Lin <Wayne.Lin@amd.com> Signed-off-by: Martin Leung <Martin.Leung@amd.com> Signed-off-by: Ray Wu <ray.wu@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-09-15drm/amd/display: Add DSC padding for OVT SupportRelja Vojvodic
[Why] -Certain OVT timings require DSC configurations which divide the horizontal active unevenly across DSC slices -DSC slices must be even, so padding needs to be added to the active to make this possible -The pixel clock of the HW now needs to be increased to accommodate the extra padded pixels -To keep the line time the same, the blank of the HW timing needs to be increased as well [How] -Calculate h_active padding, h_total padding, and pixel clock based off of the original OVT timing and DSC calculations -Store these values in the pipe and program HW with these modifications -Added general support for cases where DSC slice config does not evenly split the horizontal active by fixing some slice width calculations -Updated PPS calculations for these cases Reviewed-by: Chris Park <chris.park@amd.com> Reviewed-by: Wenjing Liu <wenjing.liu@amd.com> Signed-off-by: Relja Vojvodic <rvojvodi@amd.com> Signed-off-by: Ray Wu <ray.wu@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-09-15drm/amd/display: Add fallback path for YCBCR422Mario Limonciello
[Why] DP validation may fail with multiple displays and higher color depths. The sink may support others though. [How] When DP bandwidth validation fails, progressively fallback through: - YUV422 8bpc (bandwidth efficient) - YUV422 6bpc (reduced color depth) - YUV420 (last resort) This resolves cases where displays would show no image due to insufficient DP link bandwidth for the requested RGB mode. Suggested-by: Mauri Carvalho <mcarvalho3@lenovo.com> Reviewed-by: Wayne Lin <wayne.lin@amd.com> Signed-off-by: Mario Limonciello <Mario.Limonciello@amd.com> Signed-off-by: Ray Wu <ray.wu@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-09-15drm/amd/display: Set up pixel encoding for YCBCR422Mario Limonciello
[Why] fill_stream_properties_from_drm_display_mode() will not configure pixel encoding to YCBCR422 when the DRM color format supports YCBCR422 but not YCBCR420 or YCBCR4444. Instead it will fallback to RGB. [How] Add support for YCBCR422 in pixel encoding mapping. Suggested-by: Mauri Carvalho <mcarvalho3@lenovo.com> Reviewed-by: Wayne Lin <wayne.lin@amd.com> Signed-off-by: Mario Limonciello <Mario.Limonciello@amd.com> Signed-off-by: Ray Wu <ray.wu@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-09-15drm/amd/display: fix dml ms order of operationsAusef Yousof
[why&how] small error in order of operations in immediateflipbytes calculation on dml ms side that can result in dml ms and mp mismatch immediateflip support for a given pipe and thus an invalid hw state, correct the order to align with mp. Reviewed-by: Leo Chen <leo.chen@amd.com> Signed-off-by: Ausef Yousof <Ausef.Yousof@amd.com> Signed-off-by: Ray Wu <ray.wu@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-09-15drm/amd/display: limit one non-related log to dGPUCharlene Liu
[Why&How] some log are for dGPU only. Added check to limit log. Reviewed-by: Chris Park <chris.park@amd.com> Signed-off-by: Charlene Liu <Charlene.Liu@amd.com> Signed-off-by: Ray Wu <ray.wu@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-09-15drm/amd/display: Allow RX6xxx & RX7700 to invoke amdgpu_irq_get/putIvan Lipski
[Why&How] As reported on https://gitlab.freedesktop.org/drm/amd/-/issues/3936, SMU hang can occur if the interrupts are not enabled appropriately, causing a vblank timeout. This patch reverts commit 5009628d8509 ("drm/amd/display: Remove unnecessary amdgpu_irq_get/put"), but only for RX6xxx & RX7700 GPUs, on which the issue was observed. This will re-enable interrupts regardless of whether the user space needed it or not. Fixes: 5009628d8509 ("drm/amd/display: Remove unnecessary amdgpu_irq_get/put") Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/3936 Suggested-by: Sun peng Li <sunpeng.li@amd.com> Reviewed-by: Sun peng Li <sunpeng.li@amd.com> Signed-off-by: Ivan Lipski <ivan.lipski@amd.com> Signed-off-by: Ray Wu <ray.wu@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-09-15drm/amd/display: Rename header file link.h to link_service.hWesley Chalmers
[WHY] Header file name "link.h" collides with system header when dc is compiled as a user-mode library [WHAT] Rename link.h to link_service.h to avoid name collision Reviewed-by: Alvin Lee <alvin.lee2@amd.com> Signed-off-by: Wesley Chalmers <Wesley.Chalmers@amd.com> Signed-off-by: Ray Wu <ray.wu@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
generated by cgit v1.2.3 (git 2.46.0) at 2025-12-12 09:40:32 +0000