summaryrefslogtreecommitdiff
path: root/drivers/gpu/drm/amd/pm/swsmu/amdgpu_smu.c
AgeCommit message (Collapse)Author
2025-11-24drm/amd/pm: adjust the visibility of pp_table sysfs nodeYang Wang
v1: - make pp_table invisible on VF mode (only valid on BM) - make pp_table invisible on Mi* chips (Not supported) - make pp_table invisible if scpm feature is enabled. v2: move pp_table invisible code logic into amdgpu_dpm_get_pp_table() function. v3: add table buffer pointer check both on powerplay & swsmu. Signed-off-by: Yang Wang <kevinyang.wang@amd.com> Reviewed-by: Lijo Lazar <lijo.lazar@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-11-24drm/amd/pm: fix amdgpu_irq enabled counter unbalanced on smu v11.0Yang Wang
v1: - fix amdgpu_irq enabled counter unbalanced issue on smu_v11_0_disable_thermal_alert. v2: - re-enable smu thermal alert to make amdgpu irq counter balance for smu v11.0 if in runpm state [75582.361561] ------------[ cut here ]------------ [75582.361565] WARNING: CPU: 42 PID: 533 at drivers/gpu/drm/amd/amdgpu/amdgpu_irq.c:639 amdgpu_irq_put+0xd8/0xf0 [amdgpu] ... [75582.362211] Tainted: [E]=UNSIGNED_MODULE [75582.362214] Hardware name: GIGABYTE MZ01-CE0-00/MZ01-CE0-00, BIOS F14a 08/14/2020 [75582.362218] Workqueue: pm pm_runtime_work [75582.362225] RIP: 0010:amdgpu_irq_put+0xd8/0xf0 [amdgpu] [75582.362556] Code: 31 f6 31 ff e9 c9 bf cf c2 44 89 f2 4c 89 e6 4c 89 ef e8 db fc ff ff 5b 41 5c 41 5d 41 5e 5d 31 d2 31 f6 31 ff e9 a8 bf cf c2 <0f> 0b eb c3 b8 fe ff ff ff eb 97 e9 84 e8 8b 00 0f 1f 84 00 00 00 [75582.362560] RSP: 0018:ffffd50d51297b80 EFLAGS: 00010246 [75582.362564] RAX: 0000000000000000 RBX: 0000000000000001 RCX: 0000000000000000 [75582.362568] RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000000 [75582.362570] RBP: ffffd50d51297ba0 R08: 0000000000000000 R09: 0000000000000000 [75582.362573] R10: 0000000000000000 R11: 0000000000000000 R12: ffff8e72091d2008 [75582.362576] R13: ffff8e720af80000 R14: 0000000000000000 R15: ffff8e720af80000 [75582.362579] FS: 0000000000000000(0000) GS:ffff8e9158262000(0000) knlGS:0000000000000000 [75582.362582] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [75582.362585] CR2: 000074869d040c14 CR3: 0000001e37a3e000 CR4: 00000000003506f0 [75582.362588] Call Trace: [75582.362591] <TASK> [75582.362597] smu_v11_0_disable_thermal_alert+0x17/0x30 [amdgpu] [75582.362983] smu_smc_hw_cleanup+0x79/0x4f0 [amdgpu] [75582.363375] smu_suspend+0x92/0x110 [amdgpu] [75582.363762] ? gfx_v10_0_hw_fini+0xd5/0x150 [amdgpu] [75582.364098] amdgpu_ip_block_suspend+0x27/0x80 [amdgpu] [75582.364377] ? timer_delete_sync+0x10/0x20 [75582.364384] amdgpu_device_ip_suspend_phase2+0x190/0x450 [amdgpu] [75582.364665] amdgpu_device_suspend+0x1ae/0x2f0 [amdgpu] [75582.364948] amdgpu_pmops_runtime_suspend+0xf3/0x1f0 [amdgpu] [75582.365230] pci_pm_runtime_suspend+0x6d/0x1f0 [75582.365237] ? __pfx_pci_pm_runtime_suspend+0x10/0x10 [75582.365242] __rpm_callback+0x4c/0x190 [75582.365246] ? srso_return_thunk+0x5/0x5f [75582.365252] ? srso_return_thunk+0x5/0x5f [75582.365256] ? ktime_get_mono_fast_ns+0x43/0xe0 [75582.365263] rpm_callback+0x6e/0x80 [75582.365267] rpm_suspend+0x124/0x5f0 [75582.365271] ? srso_return_thunk+0x5/0x5f [75582.365275] ? __schedule+0x439/0x15e0 [75582.365281] ? srso_return_thunk+0x5/0x5f [75582.365285] ? __queue_delayed_work+0xb8/0x180 [75582.365293] pm_runtime_work+0xc6/0xe0 [75582.365297] process_one_work+0x1a1/0x3f0 [75582.365303] worker_thread+0x2ba/0x3d0 [75582.365309] kthread+0x107/0x220 [75582.365313] ? __pfx_worker_thread+0x10/0x10 [75582.365318] ? __pfx_kthread+0x10/0x10 [75582.365323] ret_from_fork+0xa2/0x120 [75582.365328] ? __pfx_kthread+0x10/0x10 [75582.365332] ret_from_fork_asm+0x1a/0x30 [75582.365343] </TASK> [75582.365345] ---[ end trace 0000000000000000 ]--- [75582.365350] amdgpu 0000:05:00.0: amdgpu: Fail to disable thermal alert! [75582.365379] amdgpu 0000:05:00.0: amdgpu: suspend of IP block <smu> failed -22 Signed-off-by: Yang Wang <kevinyang.wang@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Lijo Lazar <lijo.lazar@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-11-11drm/amd/pm: Expose ppt1 limit for gc_v9_5_0Asad Kamal
Expose power2_cap hwmon node for retrieving and configuring ppt1 limit on supported boards for gc_v9_5_0 v2: Remove version check (Lijo) v3: Remove power2_average (Lijo) v4: Put back power2_average, will be removed separately (Lijo) Signed-off-by: Asad Kamal <asad.kamal@amd.com> Reviewed-by: Lijo Lazar <lijo.lazar@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-11-11drm/amd/pm: Add NULL check for power limitAsad Kamal
Add NULL check for smu power limit pointer v2: Update error code on failure (Lijo) Signed-off-by: Asad Kamal <asad.kamal@amd.com> Reviewed-by: Lijo Lazar <lijo.lazar@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-11-04drm/amd/pm: add smu ras driver frameworkGangliang Xie
add functions to get smu ras driver Signed-off-by: Gangliang Xie <ganglxie@amd.com> Signed-off-by: Yang Wang <kevinyang.wang@amd.com> Reviewed-by: Tao Zhou <tao.zhou1@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-11-04drm/amdgpu/smu: Handle S0ix for vangoghAlex Deucher
Fix the flows for S0ix. There is no need to stop rlc or reintialize PMFW in S0ix. Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/4659 Reviewed-by: Mario Limonciello <mario.limonciello@amd.com> Reported-by: Antheas Kapenekakis <lkml@antheas.dev> Tested-by: Antheas Kapenekakis <lkml@antheas.dev> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-10-13drm/amd: Drop calls to restore power limit and clock from smu_resume()Mario Limonciello
User requested power limits and clock settings are already restored as part of smu_restore_dpm_user_profile(). It's unnecessary to call the same restore as part of smu_resume(). Revert the following commits to drop that extra restore: commit ed4efe426a49 ("drm/amd: Restore cached power limit during resume") commit 796ff8a7e01b ("drm/amd: Restore cached manual clock settings during resume") commit f9b80514a722 ("drm/amd: Only restore cached manual clock settings in restore if OD enabled") Suggested-by: Lijo Lazar <Lijo.Lazar@amd.com> Reviewed-by: Lijo Lazar <lijo.lazar@amd.com> Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-10-13drm/amd/pm: export a function amdgpu_smu_ras_send_msg to allow send msg directlyYiPeng Chai
provide a interface that allows ras client send msg to smu/pmfw directly. Signed-off-by: Yang Wang <kevinyang.wang@amd.com> Signed-off-by: YiPeng Chai <YiPeng.Chai@amd.com> Reviewed-by: Tao Zhou <tao.zhou1@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-10-13drm/amd: Save and restore all limit typesMario Limonciello
Vangogh has separate limits for default PPT and fast PPT. Add infrastructure to save both of these limits and restore both of them. Reviewed-by: Lijo Lazar <lijo.lazar@amd.com> Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-10-13drm/amd: Remove second call to set_power_limit()Mario Limonciello
The min/max limits only make sense for default PPT. Restructure smu_set_power_limit() to only use them in that case. Reviewed-by: Lijo Lazar <lijo.lazar@amd.com> Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-10-13drm/amd: Stop overloading power limit with limit typeMario Limonciello
When passed around internally the upper 8 bits of power limit include the limit type. This is non-obvious without digging into the nuances of each function. Instead pass the limit type as an argument to all applicable layers. Reviewed-by: Lijo Lazar <lijo.lazar@amd.com> Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-09-16drm/amd: Only restore cached manual clock settings in restore if OD enabledMario Limonciello
If OD is not enabled then restoring cached clock settings doesn't make sense and actually leads to errors in resume. Check if enabled before restoring settings. Fixes: 4e9526924d09 ("drm/amd: Restore cached manual clock settings during resume") Reported-by: Jérôme Lécuyer <jerome.4a4c@gmail.com> Closes: https://lore.kernel.org/amd-gfx/0ffe2692-7bfa-4821-856e-dd0f18e2c32b@amd.com/T/#me6db8ddb192626360c462b7570ed7eba0c6c9733 Suggested-by: Jérôme Lécuyer <jerome.4a4c@gmail.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-09-15drm/amd: Drop unnecessary calls to smu_dpm_set_vpe_enable()Mario Limonciello (AMD)
smu_hw_init() and smu_hw_fini() call smu_dpm_set_vpe_enable() for APUs as part of startup and teardown. These calls however are not necessary because vpe_hw_init()/vpe_hw_fini() will call at init/fini: ``` vpe_hw_init() / vpe_hw_fini() amdgpu_device_ip_set_powergating_state() vpe_set_powergating_state() amdgpu_dpm_enable_vpe() amdgpu_dpm_set_powergating_by_smu() smu_dpm_set_power_gate() smu_dpm_set_vpe_enable() ``` Drop the extra calls. Signed-off-by: Mario Limonciello (AMD) <superm1@kernel.org> Reviewed-by: Yang Wang <kevinyang.wang@amd.com> Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-09-15drm/amd/pm: unified smu feature cap for vcn resetYang Wang
unified vcn reset smu feature cap Signed-off-by: Yang Wang <kevinyang.wang@amd.com> Reviewed-by: Lijo Lazar <lijo.lazar@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-09-15drm/amd/pm: unified smu feature cap for sdma resetYang Wang
unified sdma reset smu feature cap Signed-off-by: Yang Wang <kevinyang.wang@amd.com> Reviewed-by: Lijo Lazar <lijo.lazar@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-09-15drm/amd/pm: unified smu feature cap for link resetYang Wang
unified link reset smu feature cap Signed-off-by: Yang Wang <kevinyang.wang@amd.com> Reviewed-by: Lijo Lazar <lijo.lazar@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-09-15drm/amd/pm: unified smu feature cap interfaceYang Wang
add a unified interface to provide smu feature cap set. Signed-off-by: Yang Wang <kevinyang.wang@amd.com> Reviewed-by: Lijo Lazar <lijo.lazar@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-09-15drm/amd/pm: make smu_set_temp_funcs() smu specific for smu v13.0.6Yang Wang
move smu_set_temp_funcs() into smu_v13.0.6 ppt.c file to keep same code layer in amdgpu_smu.c. (only set_ppt func in amdgpu_smu.c) Signed-off-by: Yang Wang <kevinyang.wang@amd.com> Reviewed-by: Lijo Lazar <lijo.lazar@amd.com> Reviewed-by: Asad Kamal <asad.kamal@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-08-15drm/amd/pm: Add VCN reset support check capabilityJesse.Zhang
This change introduces infrastructure to check whether VCN reset is supported by the SMU firmware. Key changes include: 1. Added new functions to query VCN reset support: - amdgpu_dpm_reset_vcn_is_supported() - smu_reset_vcn_is_supported() - pptable_funcs.reset_vcn_is_supported callback 2. Implemented proper locking in the DPM layer with mutex protection 3. Maintained consistency with existing SDMA reset support checks The new capability allows callers to check for VCN reset support before attempting the operation, preventing unnecessary attempts on unsupported platforms. v2: clean up debug info(Alex) Suggested-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Ruili Ji <ruiliji2@amd.com> Signed-off-by: Jesse Zhang <Jesse.Zhang@amd.com> Reviewed-by: Lijo Lazar <lijo.lazar@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-08-06drm/amd/pm: Add cache logic for temperature metricLijo Lazar
Add caching logic for baseboard and gpuboard temperature metrics tables. Signed-off-by: Lijo Lazar <lijo.lazar@amd.com> Reviewed-by: Asad Kamal <asad.kamal@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-08-06drm/amd/pm: Fetch and fill temperature metricsAsad Kamal
Fetch system metrics table to fill gpuboard/baseboard temperature metrics data for smu_v13_0_12 v2: Remove unnecessary checks, used separate metrics time for temperature metrics table(Lijo) v3: Use cached values for back to back system metrics query(Lijo) Signed-off-by: Asad Kamal <asad.kamal@amd.com> Reviewed-by: Lijo Lazar <lijo.lazar@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-08-06drm/amd/pm: Add smu interface for temp metricsAsad Kamal
Add smu interface to get baseboard/gpuboard temperature metrics v2: Rename is_support to is_supported(Lijo) Signed-off-by: Asad Kamal <asad.kamal@amd.com> Reviewed-by: Lijo Lazar <lijo.lazar@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-08-04drm/amd: Restore cached manual clock settings during resumeMario Limonciello
If the SCLK limits have been set before S3 they will not be restored. The limits are however cached in the driver and so they can be restored by running a commit sequence during resume. Acked-by: Alex Deucher <alexander.deucher@amd.com> Link: https://lore.kernel.org/r/20250725031222.3015095-3-superm1@kernel.org Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-08-04drm/amd: Restore cached power limit during resumeMario Limonciello
The power limit will be cached in smu->current_power_limit but if the ASIC goes into S3 this value won't be restored. Restore the value during SMU resume. Acked-by: Alex Deucher <alexander.deucher@amd.com> Link: https://lore.kernel.org/r/20250725031222.3015095-2-superm1@kernel.org Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-06-24drm/amd/pm: Add support to set min ISP clocksPratap Nirujogi
Add support to set ISP clocks for SMU v14.0.0. ISP driver uses amdgpu_dpm_set_soft_freq_range() API to set clocks via SMU interface than communicating with PMFW directly. amdgpu_dpm_set_soft_freq_range() is updated to take in any pp_clock_type than limiting to support only PP_SCLK to allow ISP and other driver modules to set the min/max clocks. Any clock specific restrictions are expected to be taken care in SOC specific SMU implementations instead of generic amdgpu_dpm and amdgpu_smu interfaces. Reviewed-by: Xiaojian Du <xiaojian.du@amd.com> Reviewed-by: Lijo Lazar <lijo.lazar@amd.com> Reviewed-by: Mario Limonciello <mario.limonciello@amd.com> Signed-off-by: Pratap Nirujogi <pratap.nirujogi@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-06-24drm/amd/pm: Add support to set ISP PowerPratap Nirujogi
Add support to set ISP power for SMU v14.0.0. ISP driver uses amdgpu_dpm_set_powergating_by_smu() API to enable / disable power via SMU interface than communicating with PMFW directly. Reviewed-by: Lijo Lazar <lijo.lazar@amd.com> Reviewed-by: Mario Limonciello <mario.limonciello@amd.com> Signed-off-by: Pratap Nirujogi <pratap.nirujogi@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-06-18drm/amd/pm: move the dpm table setting back after featureenablementKenneth Feng
move the dpm table setting back after featureenablemend due to dependancy. For SMUv13.0.6, there is no pptable. Those frequency tables are available through FW metrics and it needs DPM to be enabled. Signed-off-by: Kenneth Feng <kenneth.feng@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-06-18drm/amd/pm: update pcie dpm parameters before smu feature enablementKenneth Feng
update pcie dpm parameters before smu feature enablement Signed-off-by: Kenneth Feng <kenneth.feng@amd.com> Reviewed-by: Yang Wang <kevinyang.wang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-06-18drm/amdgpu: update GPU addresses for SMU and PSPSamuel Zhang
add amdgpu_bo_fb_aper_addr() and update the cached GPU addresses to use the FB aperture address for SMU and PSP. 2 reasons for this change: 1. when pdb0 is enabled, gpu addr from amdgpu_bo_create_kernel() is GART aperture address, it is not compatible with SMU and PSP, it need to be updated to use FB aperture address. 2. Since FB aperture address will change after switching to new GPU index after hibernation, it need to be updated on resume. Signed-off-by: Jiang Liu <gerry@linux.alibaba.com> Signed-off-by: Samuel Zhang <guoqing.zhang@amd.com> Acked-by: Christian König <christian.koenig@amd.com> Reviewed-by: Lijo Lazar <lijo.lazar@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-05-22drm/amd/pm: Add support to query partition metricsLijo Lazar
Add interfaces to query compute partition related metrics data. Signed-off-by: Lijo Lazar <lijo.lazar@amd.com> Reviewed-by: Asad Kamal <asad.kamal@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-05-13drm/amd/pm: Remove unused smu_mode2_reset_is_supportDr. David Alan Gilbert
smu_mode2_reset_is_support() was added in 2020 by commit 5c03e5843e6b ("drm/amdgpu:add smu mode1/2 support for aldebaran") but has remained unused. See discussion at: https://lore.kernel.org/all/DM4PR12MB5165D85BD85BC8FC8BF7A3B48E88A@DM4PR12MB5165.namprd12.prod.outlook.com/ Remove it. Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-04-08drm/amdgpu/pm/swsmu: implement pause workload profileAlex Deucher
Add the callback for implementation for swsmu. Reviewed-by: Kenneth Feng <kenneth.feng@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-04-07drm/amd/pm: implement dpm vcn reset functionRuili Ji
Implement VCN engine reset by sending MSG_ResetVCN on smu 13.0.6. v2: fix format for code and message Reviewed-by: Sonny Jiang <sonny.jiang@amd.com> Reviewed-by: Leo Liu <leo.liu@amd.com> Signed-off-by: Ruili Ji <ruiliji2@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-04-07drm/amd/pm: Add link reset for SMU 13.0.6Ce Sun
Add link reset implementation Signed-off-by: Ce Sun <cesun102@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-03-19drm/amd/pm: Add debug bit for smu pool allocationLijo Lazar
In certain cases, it's desirable to avoid PMFW log transactions to system memory. Add a mask bit to decide whether to allocate smu pool in device memory or system memory. Signed-off-by: Lijo Lazar <lijo.lazar@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-03-13drm/amdgpu: Add amdgpu_sriov_multi_vf_mode functionEmily Deng
Use amdgpu_sriov_multi_vf_mode to replace amdgpu_sriov_vf(adev) && !amdgpu_sriov_is_pp_one_vf(adev). Signed-off-by: Emily Deng <Emily.Deng@amd.com> Reviewed-by: Lijo Lazar <lijo.lazar@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-02-27drm/amdgpu/vcn: make powergating status per instanceAlex Deucher
Store it per instance so we can track it per instance. v2: index instances directly on vcn1.0 and 2.0 to make it clear that they only support a single instance (Lijo) Reviewed-by: Boyuan Zhang <Boyuan.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-02-25drm/amd/pm: handling of set performance levelMangesh Gadre
display performance level when set not supported Signed-off-by: Mangesh Gadre <Mangesh.Gadre@amd.com> Reviewed-by: Lijo Lazar <lijo.lazar@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-02-25drm/amd/pm: add support for checking SDMA reset capabilityJesse.zhang@amd.com
This patch introduces a new function to check if the SMU supports resetting the SDMA engine. This capability check ensures that the driver does not attempt to reset the SDMA engine on hardware that does not support it. The following changes are included: - New function `amdgpu_dpm_reset_sdma_is_supported` to check SDMA reset support at the AMDGPU driver level. - New function `smu_reset_sdma_is_supported` to check SDMA reset support at the SMU level. - Implementation of `smu_v13_0_6_reset_sdma_is_supported` for the specific SMU version v13.0.6. - Updated `smu_v13_0_6_reset_sdma` to use the new capability check before attempting to reset the SDMA engine. v2: change smu_reset_sdma_is_supported type to bool (Tim) Signed-off-by: Vitaly Prosyak <vitaly.prosyak@amd.com> Signed-off-by: Jesse Zhang <jesse.zhang@amd.com> Reviewed-by: Tim Huang <tim.huang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-02-19drm/amd/pm: Fetch current power limit from PMFWLijo Lazar
On SMU v13.0.12, always query the firmware to get the current power limit as it could be updated through other means also. Signed-off-by: Lijo Lazar <lijo.lazar@amd.com> Reviewed-by: Asad Kamal <asad.kamal@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-02-12drm/amd/pm: add support for IP version 11.5.2Ying Li
This initializes drm/amd/pm version 11.5.2 Signed-off-by: YING LI <yingli12@amd.com> Reviewed-by: Mario Limonciello <mario.limonciello@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-02-12drm/amdgpu/swsmu: set workload profile to bootup defaultAlex Deucher
Now that we can select a workload profile dynamically when we submit work, it's best to default to the bootup default workload profile. Defaulting to other profiles prevents some power management features from kicking in during idle periods. Once all jobs have finished, the workload profile will automatically move back to default bootup for max power savings. Reviewed-by: Lijo Lazar <lijo.lazar@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-02-12drm/amdgpu: add support for SMU IP version 14.0.5Tim Huang
This initializes SMU IP version 14.0.5. Signed-off-by: Tim Huang <tim.huang@amd.com> Reviewed-by: Yifan Zhang <yifan1.zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-02-12drm/amdgpu: avoid buffer overflow attach in smu_sys_set_pp_table()Jiang Liu
It malicious user provides a small pptable through sysfs and then a bigger pptable, it may cause buffer overflow attack in function smu_sys_set_pp_table(). Reviewed-by: Lijo Lazar <lijo.lazar@amd.com> Signed-off-by: Jiang Liu <gerry@linux.alibaba.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2024-12-10drm/amd/pm: Add smu_v13_0_12 supportAsad Kamal
Add support for new smu 13_0_12 version v2: Updated subject & moved skipping p2s init to a separate patch Signed-off-by: Asad Kamal <asad.kamal@amd.com> Reviewed-by: Lijo Lazar <lijo.lazar@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-12-10drm/amd/amdgpu: Add missing kdoc 'inst' parameter in ↵Srinivasan Shanmugam
'smu_dpm_set_power_gate' function This commit adds the missing kdoc parameter descriptor for 'inst' in the smu_dpm_set_power_gate function. The 'inst' parameter, which specifies the instance of the IP block to power gate/ungate. Fixes the below with gcc W=1: drivers/gpu/drm/amd/amdgpu/../pm/swsmu/amdgpu_smu.c:359: warning: Function parameter or struct member 'inst' not described in 'smu_dpm_set_power_gate' Cc: Christian König <christian.koenig@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com> Reviewed-by: Boyuan Zhang <Boyuan.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-12-10drm/amdgpu: pass ip_block in set_clockgating_stateBoyuan Zhang
Pass ip_block instead of adev in set_clockgating_state() callback functions. Modify set_clockgating_state()for all correspoding ip blocks. v2: remove all changes for is_idle(), remove type casting Signed-off-by: Boyuan Zhang <boyuan.zhang@amd.com> Acked-by: Christian König <christian.koenig@amd.com> Reviewed-by: Sunil Khatri <sunil.khatri@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-12-10drm/amdgpu: pass ip_block in set_powergating_stateBoyuan Zhang
Pass ip_block instead of adev in set_powergating_state callback function. Modify set_powergating_state ip functions for all correspoding ip blocks. v2: fix a ip block index error. v3: remove type casting Signed-off-by: Boyuan Zhang <boyuan.zhang@amd.com> Suggested-by: Christian König <christian.koenig@amd.com> Acked-by: Christian König <christian.koenig@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Sunil Khatri <sunil.khatri@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-12-10drm/amd/pm: add inst to set_powergating_by_smuBoyuan Zhang
Add an instance parameter to set_powergating_by_smu() function, and re-write all amd_pm functions accordingly. Then use the instance to call smu_dpm_set_vcn_enable(). v2: remove duplicated functions. remove for-loop in smu_dpm_set_power_gate(), and temporarily move it to to amdgpu_dpm_set_powergating_by_smu(), in order to keep the exact same logic as before, until further separation in next patch. v3: add instance number in error message. Signed-off-by: Boyuan Zhang <boyuan.zhang@amd.com> Acked-by: Christian König <christian.koenig@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-12-10drm/amd/pm: add inst to smu_dpm_set_vcn_enableBoyuan Zhang
First, add an instance parameter to smu_dpm_set_vcn_enable() function, and calling dpm_set_vcn_enable() with this given instance. Second, modify vcn_gated to be an array, to track the gating status for each vcn instance separately. With these 2 changes, smu_dpm_set_vcn_enable() will check and set the gating status for the given vcn instance ONLY. v2: remove duplicated functions. remove for-loop in dpm_set_vcn_enable(), and temporarily move it to to smu_dpm_set_power_gate(), in order to keep the exact same logic as before, until further separation in next patch. v3: add instance number in error message. v4: declaring i at the top of the function. Signed-off-by: Boyuan Zhang <boyuan.zhang@amd.com> Acked-by: Christian König <christian.koenig@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
generated by cgit v1.2.3 (git 2.46.0) at 2025-12-10 08:00:53 +0000