| Age | Commit message (Collapse) | Author |
|---|
|
Pull drm updates from Dave Airlie:
"There was a rather late merge of a new color pipeline feature, that
some userspace projects are blocked on, and has seen a lot of work in
amdgpu. This should have seen some time in -next. There is additional
support for this for Intel, that if it arrives in the next day or two
I'll pass it on in another pull request and you can decide if you want
to take it.
Highlights:
- Arm Ethos NPU accelerator driver
- new DRM color pipeline support
- amdgpu will now run discrete SI/CIK cards instead of radeon, which
enables vulkan support in userspace
- msm gets gen8 gpu support
- initial Xe3P support in xe
Full detail summary:
New driver:
- Arm Ethos-U65/U85 accel driver
Core:
- support the drm color pipeline in vkms/amdgfx
- add support for drm colorop pipeline
- add COLOR PIPELINE plane property
- add DRM_CLIENT_CAP_PLANE_COLOR_PIPELINE
- throttle dirty worker with vblank
- use drm_for_each_bridge_in_chain_scoped in drm's bridge code
- Ensure drm_client_modeset tests are enabled in UML
- add simulated vblank interrupt - use in drivers
- dumb buffer sizing helper
- move freeing of drm client memory to driver
- crtc sharpness strength property
- stop using system_wq in scheduler/drivers
- support emergency restore in drm-client
Rust:
- make slice::as_flattened usable on all supported rustc
- add FromBytes::from_bytes_prefix() method
- remove redundant device ptr from Rust GEM object
- Change how AlwaysRefCounted is implemented for GEM objects
gpuvm:
- Add deferred vm_bo cleanup to GPUVM (for rust)
atomic:
- cleanup and improve state handling interfaces
buddy:
- optimize block management
dma-buf:
- heaps: Create heap per CMA reserved location
- improve userspace documentation
dp:
- add POST_LT_ADJ_REQ training sequence
- DPCD dSC quirk for synaptics panamera devices
- helpers to query branch DSC max throughput
ttm:
- Rename ttm_bo_put to ttm_bo_fini
- allow page protection flags on risc-v
- rework pipelined eviction fence handling
amdgpu:
- enable amdgpu by default for SI/CI dGPUs
- enable DC by default on SI
- refactor CIK/SI enablement
- add ABM KMS property
- Re-enable DM idle optimizations
- DC Analog encoders support
- Powerplay fixes for fiji/iceland
- Enable DC on bonaire by default
- HMM cleanup
- Add new RAS framework
- DML2.1 updates
- YCbCr420 fixes
- DC FP fixes
- DMUB fixes
- LTTPR fixes
- DTBCLK fixes
- DMU cursor offload handling
- Userq validation improvements
- Unify shutdown callback handling
- Suspend improvements
- Power limit code cleanup
- SR-IOV fixes
- AUX backlight fixes
- DCN 3.5 fixes
- HDMI compliance fixes
- DCN 4.0.1 cursor updates
- DCN interrupt fix
- DC KMS full update improvements
- Add additional HDCP traces
- DCN 3.2 fixes
- DP MST fixes
- Add support for new SR-IOV mailbox interface
- UQ reset support
- HDP flush rework
- VCE1 support
amdkfd:
- HMM cleanups
- Relax checks on save area overallocations
- Fix GPU mappings after prefetch
radeon:
- refactor CIK/SI enablement
xe:
- Initial Xe3P support
- panic support on VRAM for display
- fix stolen size check
- Loosen used tracking restriction
- New SR-IOV debugfs structure and debugfs updates
- Hide the GPU madvise flag behind a VM_BIND flag
- Always expose VRAM provisioning data on discrete GPUs
- Allow VRAM mappings for userptr when used with SVM
- Allow pinning of p2p dma-buf
- Use per-tile debugfs where appropriate
- Add documentation for Execution Queues
- PF improvements
- VF migration recovery redesign work
- User / Kernel VRAM partitioning
- Update Tile-based messages
- Allow configfs to disable specific GT types
- VF provisioning and migration improvements
- use SVM range helpers in PT layer
- Initial CRI support
- access VF registers using dedicated MMIO view
- limit number of jobs per exec queue
- add sriov_admin sysfs tree
- more crescent island specific support
- debugfs residency counter
- SRIOV migration work
- runtime registers for GFX 35
i915:
- add initial Xe3p_LPD display version 35 support
- Enable LNL+ content adaptive sharpness filter
- Use optimized VRR guardband
- Enable Xe3p LT PHY
- enable FBC support for Xe3p_LPD display
- add display 30.02 firmware support
- refactor SKL+ watermark latency setup
- refactor fbdev handling
- call i915/xe runtime PM via function pointers
- refactor i915/xe stolen memory/display interfaces
- use display version instead of gfx version in display code
- extend i915_display_info with Type-C port details
- lots of display cleanups/refactorings
- set O_LARGEFILE in __create_shmem
- skuip guc communication warning on reset
- fix time conversions
- defeature DRRS on LNL+
- refactor intel_frontbuffer split between i915/xe/display
- convert inteL_rom interfaces to struct drm_device
- unify display register polling interfaces
- aovid lock inversion when pinning to GGTT on CHV/BXT+VTD
panel:
- Add KD116N3730A08/A12, chromebook mt8189
- JT101TM023, LQ079L1SX01,
- GLD070WX3-SL01 MIPI DSI
- Samsung LTL106AL0, Samsung LTL106AL01
- Raystar RFF500F-AWH-DNN
- Winstar WF70A8SYJHLNGA
- Wanchanglong w552946aaa
- Samsung SOFEF00
- Lenovo X13s panel
- ilitek-ili9881c - add rpi 5" support
- visionx-rm69299 - add backlight support
- edp - support AUI B116XAN02.0
bridge:
- improve ref counting
- ti-sn65dsi86 - add support for DP mode with HPD
- synopsis: support CEC, init timer with correct freq
- ASL CS5263 DP-to-HDMI bridge support
nova-core:
- introduce bitfield! macro
- introduce safe integer converters
- GSP inits to fully booted state on Ampere
- Use more future-proof register for GPU identification
nova-drm:
- select NOVA_CORE
- 64-bit only
nouveau:
- improve reclocking on tegra 186+
- add large page and compression support
msm:
- GPU:
- Gen8 support: A840 (Kaanapali) and X2-85 (Glymur)
- A612 support
- MDSS:
- Added support for Glymur and QCS8300 platforms
- DPU:
- Enabled Quad-Pipe support, unlocking higher resolutions support
- Added support for Glymur platform
- Documented DPU on QCS8300 platform as supported
- DisplayPort:
- Added support for Glymur platform
- Added support lame remapping inside DP block
- Documented DisplayPort controller on QCS8300 and SM6150/QCS615
as supported
tegra:
- NVJPG driver
panfrost:
- display JM contexts over debugfs
- export JM contexts to userspace
- improve error and job handling
panthor:
- support custom ASN_HASH for mt8196
- support mali-G1 GPU
- flush shmem write before mapping buffers uncached
- make timeout per-queue instead of per-job
mediatek:
- MT8195/88 HDMIv2/DDCv2 support
rockchip:
- dsi: add support for RK3368
amdxdna:
- enhance runtime PM
- last hardware error reading uapi
- support firmware debug output
- add resource and telemetry data uapi
- preemption support
imx:
- add driver for HDMI TX Parallel audio interface
ivpu:
- add support for user-managed preemption buffer
- add userptr support
- update JSM firware API to 3.33.0
- add better alloc/free warnings
- fix page fault in unbind all bos
- rework bind/unbind of imported buffers
- enable MCA ECC signalling
- split fw runtime and global memory buffers
- add fdinfo memory statistics
tidss:
- convert to drm logging
- logging cleanup
ast:
- refactor generation init paths
- add per chip generation detect_tx_chip
- set quirks for each chip model
atmel-hlcdc:
- set LCDC_ATTRE register in plane disable
- set correct values for plane scaler
solomon:
- use drm helper for get_modes and move_valid
sitronix:
- fix output position when clearing screens
qaic:
- support dma-buf exports
- support new firmware's READ_DATA implementation
- sahara AIC200 image table update
- add sysfs support
- add coredump support
- add uevents support
- PM support
sun4i:
- layer refactors to decouple plane from output
- improve DE33 support
vc4:
- switch to generic CEC helpers
komeda:
- use drm_ logging functions
vkms:
- configfs support for display configuration
vgem:
- fix fence timer deadlock
etnaviv:
- add HWDB entry for GC8000 Nano Ultra VIP r6205"
* tag 'drm-next-2025-12-03' of https://gitlab.freedesktop.org/drm/kernel: (1869 commits)
Revert "drm/amd: Skip power ungate during suspend for VPE"
drm/amdgpu: use common defines for HUB faults
drm/amdgpu/gmc12: add amdgpu_vm_handle_fault() handling
drm/amdgpu/gmc11: add amdgpu_vm_handle_fault() handling
drm/amdgpu: use static ids for ACP platform devs
drm/amdgpu/sdma6: Update SDMA 6.0.3 FW version to include UMQ protected-fence fix
drm/amdgpu: Forward VMID reservation errors
drm/amdgpu/gmc8: Delegate VM faults to soft IRQ handler ring
drm/amdgpu/gmc7: Delegate VM faults to soft IRQ handler ring
drm/amdgpu/gmc6: Delegate VM faults to soft IRQ handler ring
drm/amdgpu/gmc6: Cache VM fault info
drm/amdgpu/gmc6: Don't print MC client as it's unknown
drm/amdgpu/cz_ih: Enable soft IRQ handler ring
drm/amdgpu/tonga_ih: Enable soft IRQ handler ring
drm/amdgpu/iceland_ih: Enable soft IRQ handler ring
drm/amdgpu/cik_ih: Enable soft IRQ handler ring
drm/amdgpu/si_ih: Enable soft IRQ handler ring
drm/amd/display: fix typo in display_mode_core_structs.h
drm/amd/display: fix Smart Power OLED not working after S4
drm/amd/display: Move RGB-type check for audio sync to DCE HW sequence
...
|
|
Add support for the transparent ASL CS5263 DP-to-HDMI bridge.
Signed-off-by: Ettore Chimenti <ettore.chimenti@linaro.org>
Signed-off-by: Georg Gottleuber <ggo@tuxedocomputers.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patch.msgid.link/20251121142623.251118-4-ggo@tuxedocomputers.com
|
|
The sii902x driver was caching HDMI detection state in a sink_is_hdmi field
and checking it in mode_set() to determine whether to set HDMI or DVI
output mode. This approach had two problems:
1. With DRM_BRIDGE_ATTACH_NO_CONNECTOR (used by modern display drivers like
TIDSS), the bridge's get_modes() is never called. Instead, the
drm_bridge_connector helper calls the bridge's edid_read() and updates the
connector itself. This meant sink_is_hdmi was never populated, causing the
driver to default to DVI mode and breaking HDMI audio.
2. The mode_set() callback doesn't receive atomic state or connector
pointer, making it impossible to check connector->display_info.is_hdmi
directly at that point.
Fix this by moving the HDMI vs DVI decision from mode_set() to
atomic_enable(), where we can access the connector via
drm_atomic_get_new_connector_for_encoder(). This works for both connector
models:
- With DRM_BRIDGE_ATTACH_NO_CONNECTOR: Returns the drm_bridge_connector
created by the display driver, which has already been updated by the
helper's call to drm_edid_connector_update()
- Without DRM_BRIDGE_ATTACH_NO_CONNECTOR (legacy): Returns the connector
embedded in sii902x struct, which gets updated by the bridge's own
get_modes()
Fixes: 3de47e1309c2 ("drm/bridge: sii902x: use display info is_hdmi")
Signed-off-by: Devarsh Thakkar <devarsht@ti.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patch.msgid.link/20251030151635.3019864-1-devarsht@ti.com
|
|
The IT66122 is a pin compatible replacement for the IT66122. Based on
empirical testing, the new device looks to be compatible with IT66121.
However due to a lack of public data sheet at this time beyond overall
feature list[1] (which seems to add additional features vs ITT66121),
it is hard to determine that additional register operations required
to enable additional features.
So, introduce the device as a new compatible that we will detect based
on vid/pid match, with explicit id that can be used to extend the
driver capability as information becomes available later on.
[1] https://www.ite.com.tw/en/product/cate1/IT66122
Signed-off-by: Nishanth Menon <nm@ti.com>
Reviewed-by: Andrew Davis <afd@ti.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patch.msgid.link/20251029150636.3118628-6-nm@ti.com
|
|
The driver knows exactly which version of the chip is present since
the vid/pid is used to enforce a compatibility. Given that some
devices like IT66121 has potentially been replaced with IT66122 mid
production for many platforms, it makes no sense to use the vid/pid
as an enforcement for compatibility. Instead, detect the ID of the
actual chip in use by matching the corresponding vid/pid and drop the
compatible specific lookup table.
Signed-off-by: Nishanth Menon <nm@ti.com>
Reviewed-by: Andrew Davis <afd@ti.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patch.msgid.link/20251029150636.3118628-5-nm@ti.com
|
|
Keep the compatibles sorted alpha-numerically.
Signed-off-by: Nishanth Menon <nm@ti.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patch.msgid.link/20251029150636.3118628-4-nm@ti.com
|
|
Drop the ftrace like dev_dbg() that checkpatch --strict complains about:
WARNING: Unnecessary ftrace-like logging - prefer using ftrace
+ dev_dbg(dev, "%s\n", __func__);
WARNING: Unnecessary ftrace-like logging - prefer using ftrace
+ dev_dbg(dev, "%s\n", __func__);
WARNING: Unnecessary ftrace-like logging - prefer using ftrace
+ dev_dbg(dev, "%s\n", __func__);
Signed-off-by: Nishanth Menon <nm@ti.com>
Reviewed-by: Andrew Davis <afd@ti.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patch.msgid.link/20251029150636.3118628-3-nm@ti.com
|
|
The Parade PS185HDM is a transparent Displayport to HDMI bridge.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Signed-off-by: Maud Spierings <maud_spierings@hotmail.com>
Link: https://patch.msgid.link/20251116-asus_usbc_dp-v2-2-cc8f51136c9f@hotmail.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
|
|
Extend struct dw_hdmi_qp_plat_data to include the supported display
output formats and maximum bits per color channel. When provided by the
platform driver, use them to setup the HDMI bridge accordingly.
Additionally, improve debug logging in dw_hdmi_qp_bridge_atomic_enable()
to also show the current HDMI output format and bpc.
Acked-by: Daniel Stone <daniels@collabora.com>
Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://lore.kernel.org/r/20251021-rk3588-10bpc-v3-2-3d3eed00a6db@collabora.com
|
|
DRM bridges should be always added to the global bridge list before being
attached.
Reviewed-by: Raphael Gallais-Pou <rgallaispou@gmail.com>
Link: https://patch.msgid.link/20251028-b4-drm-bridge-alloc-add-before-attach-v3-6-bb8611acbbfb@bootlin.com
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
|
|
https://gitlab.freedesktop.org/drm/misc/kernel into drm-next
drm-misc-next for v6.19:
UAPI Changes:
amdxdna:
- Support reading last hardware error
Cross-subsystem Changes:
dma-buf:
- heaps: Create heap per CMA reserved location; Improve user-space documentation
Core Changes:
atomic:
- Clean up and improve state-handling interfaces, update drivers
bridge:
- Improve ref counting
buddy:
- Optimize block management
Driver Changes:
amdxdna:
- Fix runtime power management
- Support firmware debug output
ast:
- Set quirks for each chip model
atmel-hlcdc:
- Set LCDC_ATTRE register in plane disable
- Set correct values for plane scaler
bochs:
- Use vblank timer
bridge:
- synopsis: Support CEC; Init timer with correct frequency
cirrus-qemu:
- Use vblank timer
imx:
- Clean up
ivu:
- Update JSM API to 3.33.0
- Reset engine on more job errors
- Return correct error codes for jobs
komeda:
- Use drm_ logging functions
panel:
- edp: Support AUO B116XAN02.0
panfrost:
- Embed struct drm_driver in Panfrost device
- Improve error handling
- Clean up job handling
panthor:
- Support custom ASN_HASH for mt8196
renesas:
- rz-du: Fix dependencies
rockchip:
- dsi: Add support for RK3368
- Fix LUT size for RK3386
sitronix:
- Fix output position when clearing screens
qaic:
- Support dma-buf exports
- Support new firmware's READ_DATA implementation
- Replace kcalloc with memdup
- Replace snprintf() with sysfs_emit()
- Avoid overflows in arithmetics
- Clean up
- Fixes
qxl:
- Use vblank timer
rockchip:
- Clean up mode-setting code
vgem:
- Fix fence timer deadlock
virtgpu:
- Use vblank timer
Signed-off-by: Simona Vetter <simona.vetter@ffwll.ch>
From: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://lore.kernel.org/r/20251021111837.GA40643@linux.fritz.box
|
|
https://gitlab.freedesktop.org/drm/misc/kernel into drm-next
drm-misc-next for v6.19:
UAPI Changes:
Cross-subsystem Changes:
- fbcon cleanups.
- Make drivers depend on FB_TILEBLITTING instead of selecting it,
and hide FB_MODE_HELPERS.
Core Changes:
- More preparations for rust.
- Throttle dirty worker with vblank
- Use drm_for_each_bridge_in_chain_scoped in drm's bridge code and
assorted fixes.
- Ensure drm_client_modeset tests are enabled in UML.
- Rename ttm_bo_put to ttm_bo_fini, as a further step in removing the
TTM bo refcount.
- Add POST_LT_ADJ_REQ training sequence.
- Show list of removed but still allocated bridges.
- Add a simulated vblank interrupt for hardware without it,
and add some helpers to use them in vkms and hypervdrm.
Driver Changes:
- Assorted small fixes, cleanups and updates to host1x, tegra,
panthor, amdxdna, gud, vc4, ssd130x, ivpu, panfrost, panthor,
sysfb, bridge/sn65dsi86, solomon, ast, tidss.
- Convert drivers from using .round_rate() to .determine_rate()
- Add support for KD116N3730A07/A12, chromebook mt8189, JT101TM023,
LQ079L1SX01, raspberrypi 5" panels.
- Improve reclocking on tegra186+ with nouveau.
- Improve runtime pm in amdxdna.
- Add support for HTX_PAI in imx.
- Use a helper to calculate dumb buffer sizes in most drivers.
Signed-off-by: Simona Vetter <simona.vetter@ffwll.ch>
From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://lore.kernel.org/r/b412fb91-8545-466a-8102-d89c0f2758a7@linux.intel.com
|
|
Currently the TIMER_BASE_CONFIG0 register gets initialized to a fixed
value as initially found in vendor driver code supporting the RK3588
SoC. As a matter of fact the value matches the rate of the HDMI TX
reference clock, which is roughly 428.57 MHz.
However, on RK3576 SoC that rate is slightly lower, i.e. 396.00 MHz, and
the incorrect register configuration breaks CEC functionality.
Set the timer base according to the actual reference clock rate that
shall be provided by the platform driver. Otherwise fallback to the
vendor default.
While at it, also drop the unnecessary empty lines in
dw_hdmi_qp_init_hw().
Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://lore.kernel.org/r/20250903-rk3588-hdmi-cec-v4-2-fa25163c4b08@collabora.com
|
|
Add support for the CEC interface of the Synopsys DesignWare HDMI QP TX
controller.
This is based on the downstream implementation, but rewritten on top of
the CEC helpers added recently to the DRM HDMI connector framework.
Also note struct dw_hdmi_qp_plat_data has been extended to include the
CEC IRQ number to be provided by the platform driver.
Co-developed-by: Algea Cao <algea.cao@rock-chips.com>
Signed-off-by: Algea Cao <algea.cao@rock-chips.com>
Co-developed-by: Derek Foreman <derek.foreman@collabora.com>
Signed-off-by: Derek Foreman <derek.foreman@collabora.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://lore.kernel.org/r/20250903-rk3588-hdmi-cec-v4-1-fa25163c4b08@collabora.com
|
|
Updating drm-misc-fixes to the state of v6.18-rc1.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
|
|
Updating drm-misc-next to the state of v6.18-rc1.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
|
|
There is now a new LT9211 rev. U5, which reports chip ID 0x18 0x01 0xe4 .
The previous LT9211 reported chip ID 0x18 0x01 0xe3 , which is what the
driver checks for right now. Since there is a possibility there will be
yet another revision of the LT9211 in the future, drop the last version
nibble check to allow all future revisions of the chip to work with this
driver.
This fix makes LT9211 rev. U5 work with this driver.
Fixes: 8ce4129e3de4 ("drm/bridge: lt9211: Add Lontium LT9211 bridge driver")
Signed-off-by: Marek Vasut <marek.vasut@mailbox.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20251011110017.12521-1-marek.vasut@mailbox.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
|
|
Pull drm updates from Dave Airlie:
"cross-subsystem:
- i2c-hid: Make elan touch controllers power on after panel is
enabled
- dt bindings for STM32MP25 SoC
- pci vgaarb: use screen_info helpers
- rust pin-init updates
- add MEI driver for late binding firmware update/load
uapi:
- add ioctl for reassigning GEM handles
- provide boot_display attribute on boot-up devices
core:
- document DRM_MODE_PAGE_FLIP_EVENT
- add vendor specific recovery method to drm device wedged uevent
gem:
- Simplify gpuvm locking
ttm:
- add interface to populate buffers
sched:
- Fix race condition in trace code
atomic:
- Reallow no-op async page flips
display:
- dp: Fix command length
video:
- Improve pixel-format handling for struct screen_info
rust:
- drop Opaque<> from ioctl args
- Alloc:
- BorrowedPage type and AsPageIter traits
- Implement Vmalloc::to_page() and VmallocPageIter
- DMA/Scatterlist:
- Add dma::DataDirection and type alias for dma_addr_t
- Abstraction for struct scatterlist and sg_table
- DRM:
- simplify use of generics
- add DriverFile type alias
- drop Object::SIZE
- Rust:
- pin-init tree merge
- Various methods for AsBytes and FromBytes traits
gpuvm:
- Support madvice in Xe driver
gpusvm:
- fix hmm_pfn_to_map_order usage in gpusvm
bridge:
- Improve and fix ref counting on bridge management
- cdns-dsi: Various improvements to mode setting
- Support Solomon SSD2825 plus DT bindings
- Support Waveshare DSI2DPI plus DT bindings
- Support Content Protection property
- display-connector: Improve DP display detection
- Add support for Radxa Ra620 plus DT bindings
- adv7511: Provide SPD and HDMI infoframes
- it6505: Replace crypto_shash with sha()
- synopsys: Add support for DW DPTX Controller plus DT bindings
- adv7511: Write full Audio infoframe
- ite6263: Support vendor-specific infoframes
- simple: Add support for Realtek RTD2171 DP-to-HDMI plus DT bindings
panel:
- panel-edp: Support mt8189 Chromebooks; Support BOE NV140WUM-N64;
Support SHP LQ134Z1; Fixes
- panel-simple: Support Olimex LCD-OLinuXino-5CTS plus DT bindings
- Support Samsung AMS561RA01
- Support Hydis HV101HD1 plus DT bindings
- ilitek-ili9881c: Refactor mode setting; Add support for Bestar
BSD1218-A101KL68 LCD plus DT bindings
- lvds: Add support for Ampire AMP19201200B5TZQW-T03 to DT bindings
- edp: Add support for additonal mt8189 Chromebook panels
- lvds: Add DT bindings for EDT ETML0700Z8DHA
amdgpu:
- add CRIU support for gem objects
- RAS updates
- VCN SRAM load fixes
- EDID read fixes
- eDP ALPM support
- Documentation updates
- Rework PTE flag generation
- DCE6 fixes
- VCN devcoredump cleanup
- MMHUB client id fixes
- VCN 5.0.1 RAS support
- SMU 13.0.x updates
- Expanded PCIe DPC support
- Expanded VCN reset support
- VPE per queue reset support
- give kernel jobs unique id for tracing
- pre-populate exported buffers
- cyan skillfish updates
- make vbios build number available in sysfs
- userq updates
- HDCP updates
- support MMIO remap page as ttm pool
- JPEG parser updates
- DCE6 DC updates
- use devm for i2c buses
- GPUVM locking updates
- Drop non-DC DCE11 code
- improve fallback handling for pixel encoding
amdkfd:
- SVM/page migration fixes
- debugfs fixes
- add CRIO support for gem objects
- SVM updates
radeon:
- use dev_warn_once in CS parsers
xe:
- add madvise interface
- add DRM_IOCTL_XE_VM_QUERY_MEMORY_RANGE_ATTRS to query VMA count
and memory attributes
- drop L# bank mask reporting from media GT3 on Xe3+.
- add SLPC power_profile sysfs interface
- add configs attribs to add post/mid context-switch commands
- handle firmware reported hardware errors notifying userspace with
device wedged uevent
- use same dir structure across sysfs/debugfs
- cleanup and future proof vram region init
- add G-states and PCI link states to debugfs
- Add SRIOV support for CCS surfaces on Xe2+
- Enable SRIOV PF mode by default on supported platforms
- move flush to common code
- extended core workarounds for Xe2/3
- use DRM scheduler for delayed GT TLB invalidations
- configs improvements and allow VF device enablement
- prep work to expose mmio regions to userspace
- VF migration support added
- prepare GPU SVM for THP migration
- start fixing XE_PAGE_SIZE vs PAGE_SIZE
- add PSMI support for hw validation
- resize VF bars to max possible size according to number of VFs
- Ensure GT is in C0 during resume
- pre-populate exported buffers
- replace xe_hmm with gpusvm
- add more SVM GT stats to debugfs
- improve fake pci and WA kunnit handle for new platform testing
- Test GuC to GuC comms to add debugging
- use attribute groups to simplify sysfs registration
- add Late Binding firmware code to interact with MEI
i915:
- apply multiple JSL/EHL/Gen7/Gen6 workarounds properly
- protect against overflow in active_engine()
- Use try_cmpxchg64() in __active_lookup()
- include GuC registers in error state
- get rid of dev->struct_mutex
- iopoll: generalize read_poll_timout
- lots more display refactoring
- Reject HBR3 in any eDP Panel
- Prune modes for YUV420
- Display Wa fix, additions, and updates
- DP: Fix 2.7 Gbps link training on g4x
- DP: Adjust the idle pattern handling
- DP: Shuffle the link training code a bit
- Don't set/read the DSI C clock divider on GLK
- Enable_psr kernel parameter changes
- Type-C enabled/disconnected dp-alt sink
- Wildcat Lake enabling
- DP HDR updates
- DRAM detection
- wait PSR idle on dsb commit
- Remove FBC modulo 4 restriction for ADL-P+
- panic: refactor framebuffer allocation
habanalabs:
- debug/visibility improvements
- vmalloc-backed coherent mmap support
- HLDIO infrastructure
nova-core:
- various register!() macro improvements
- minor vbios/firmware fixes/refactoring
- advance firmware boot stages; process Booter and patch signatures
- process GSP and GSP bootloader
- Add r570.144 firmware bindings and update to it
- Move GSP boot code to own module
- Use new pin-init features to store driver's private data in a
single allocation
- Update ARef import from sync::aref
nova-drm:
- Update ARef import from sync::aref
tyr:
- initial driver skeleton for a rust driver for ARM Mali GPUs
- capable of powering up, query metadata and provide it to userspace.
msm:
- GPU and Core:
- in DT bindings describe clocks per GPU type
- GMU bandwidth voting for x1-85
- a623/a663 speedbins
- cleanup some remaining no-iommu leftovers after VM_BIND conversion
- fix GEM obj 32b size truncation
- add missing VM_BIND param validation
- IFPC for x1-85 and a750
- register xml and gen_header.py sync from mesa
- Display:
- add missing bindings for display on SC8180X
- added DisplayPort MST bindings
- conversion from round_rate() to determine_rate()
amdxdna:
- add IOCTL_AMDXDNA_GET_ARRAY
- support user space allocated buffers
- streamline PM interfaces
- Refactoring wrt. hardware contexts
- improve error reporting
nouveau:
- use GSP firmware by default
- improve error reporting
- Pre-populate exported buffers
ast:
- Clean up detection of DRAM config
exynos:
- add DSIM bridge driver support for Exynos7870
- Document Exynos7870 DSIM compatible in dt-binding
panthor:
- Print task/pid on errors
- Add support for Mali G710, G510, G310, Gx15, Gx20, Gx25
- Improve cache flushing
- Fail VM bind if BO has offset
renesas:
- convert to RUNTIME_PM_OPS
rcar-du:
- Make number of lanes configurable
- Use RUNTIME_PM_OPS
- Add support for DSI commands
rocket:
- Add driver for Rockchip NPU plus DT bindings
- Use kfree() and sizeof() correctly
- Test DMA status
rockchip:
- dsi2: Add support for RK3576 plus DT bindings
- Add support for RK3588 DPTX output
tidss:
- Use crtc_ fields for programming display mode
- Remove other drivers from aperture
pixpaper:
- Add support for Mayqueen Pixpaper plus DT bindings
v3d:
- Support querying nubmer of GPU resets for KHR_robustness
stm:
- Clean up logging
- ltdc: Add support support for STM32MP257F-EV1 plus DT bindings
sitronix:
- st7571-i2c: Add support for inverted displays and 2-bit grayscale
tidss:
- Convert to kernel's FIELD_ macros
vesadrm:
- Support 8-bit palette mode
imagination:
- Improve power management
- Add support for TH1520 GPU
- Support Risc-V architectures
v3d:
- Improve job management and locking
vkms:
- Support variants of ARGB8888, ARGB16161616, RGB565, RGB888 and P01x
- Spport YUV with 16-bit components"
* tag 'drm-next-2025-10-01' of https://gitlab.freedesktop.org/drm/kernel: (1455 commits)
drm/amd: Add name to modes from amdgpu_connector_add_common_modes()
drm/amd: Drop some common modes from amdgpu_connector_add_common_modes()
drm/amdgpu: update MODULE_PARM_DESC for freesync_video
drm/amd: Use dynamic array size declaration for amdgpu_connector_add_common_modes()
drm/amd/display: Share dce100_validate_global with DCE6-8
drm/amd/display: Share dce100_validate_bandwidth with DCE6-8
drm/amdgpu: Fix fence signaling race condition in userqueue
amd/amdkfd: enhance kfd process check in switch partition
amd/amdkfd: resolve a race in amdgpu_amdkfd_device_fini_sw
drm/amd/display: Reject modes with too high pixel clock on DCE6-10
drm/amd: Drop unnecessary check in amdgpu_connector_add_common_modes()
drm/amd/display: Only enable common modes for eDP and LVDS
drm/amdgpu: remove the redeclaration of variable i
drm/amdgpu/userq: assign an error code for invalid userq va
drm/amdgpu: revert "rework reserved VMID handling" v2
drm/amdgpu: remove leftover from enforcing isolation by VMID
drm/amdgpu: Add fallback to pipe reset if KCQ ring reset fails
accel/habanalabs: add Infineon version check
accel/habanalabs/gaudi2: read preboot status after recovering from dirty state
accel/habanalabs: add HL_GET_P_STATE passthrough type
...
|
|
The HDMI TX Parallel Audio Interface (HTX_PAI) is a digital module that
acts as the bridge between the Audio Subsystem to the HDMI TX Controller.
This IP block is found in the HDMI subsystem of the i.MX8MP SoC.
Data received from the audio subsystem can have an arbitrary component
ordering. The HTX_PAI block has integrated muxing options to select which
sections of the 32-bit input data word will be mapped to each IEC60958
field. The HTX_PAI_FIELD_CTRL register contains mux selects to
individually select P,C,U,V,Data, and Preamble.
Use component helper so that imx8mp-hdmi-tx will be aggregate driver,
imx8mp-hdmi-pai will be component driver, then imx8mp-hdmi-pai can use
bind() ops to get the plat_data from imx8mp-hdmi-tx device.
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Reviewed-by: Liu Ying <victor.liu@nxp.com>
Tested-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Liu Ying <victor.liu@nxp.com>
Link: https://lore.kernel.org/r/20250923053001.2678596-6-shengjiu.wang@nxp.com
|
|
Add API dw_hdmi_set_sample_iec958() for IEC958 format because audio device
driver needs IEC958 information to configure this specific setting.
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Acked-by: Liu Ying <victor.liu@nxp.com>
Tested-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Liu Ying <victor.liu@nxp.com>
Link: https://lore.kernel.org/r/20250923053001.2678596-5-shengjiu.wang@nxp.com
|
|
Add API dw_hdmi_to_plat_data() to fetch plat_data because audio device
driver needs it to enable(disable)_audio().
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Acked-by: Liu Ying <victor.liu@nxp.com>
Tested-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Liu Ying <victor.liu@nxp.com>
Link: https://lore.kernel.org/r/20250923053001.2678596-4-shengjiu.wang@nxp.com
|
|
https://gitlab.freedesktop.org/drm/misc/kernel into drm-next
Short summary of fixes pull:
bridge:
- waveshare-dsi: Fix error handling in probe function
pixpaper:
- select GEM SHMEM helpers
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://lore.kernel.org/r/20250925064257.GA9107@linux.fritz.box
|
|
Add support for DisplayPort to the bridge, which entails the following:
- Get and use an interrupt for HPD;
- Properly clear all status bits in the interrupt handler;
Signed-off-by: John Ripple <john.ripple@keysight.com>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://lore.kernel.org/r/20250915174543.2564994-1-john.ripple@keysight.com
|
|
devm_drm_bridge_alloc() returns ERR_PTR on failure instead of a
NULL pointer, so use IS_ERR() to check the returned pointer and
turn proper error code on failure by using PTR_ERR().
Fixes: dbdea37add13 ("drm: bridge: Add waveshare DSI2DPI unit driver")
Signed-off-by: Liu Ying <victor.liu@nxp.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250806084121.510207-1-victor.liu@nxp.com
|
|
Add missing mutex unlock before returning from the error path in
cdns_mhdp_atomic_enable().
Fixes: 935a92a1c400 ("drm: bridge: cdns-mhdp8546: Fix possible null pointer dereference")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Qi Xi <xiqi2@huawei.com>
Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20250904034447.665427-1-xiqi2@huawei.com
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
|
|
If the interrupt occurs before resource initialization is complete, the
interrupt handler/worker may access uninitialized data such as the I2C
tcpc_client device, potentially leading to NULL pointer dereference.
Signed-off-by: Loic Poulain <loic.poulain@oss.qualcomm.com>
Fixes: 8bdfc5dae4e3 ("drm/bridge: anx7625: Add anx7625 MIPI DSI/DPI to DP")
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250709085438.56188-1-loic.poulain@oss.qualcomm.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
|
|
Add support for Exynos7870's DSIM IP block in the bridge driver.
Signed-off-by: Kaustabh Chakraborty <kauschluss@disroot.org>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
|
|
Presently, all devices refer to clock names from a single array. The
only controlling parameter is the number of clocks (num_clks field of
samsung_dsim_driver_data) which uses the first n clocks of that array.
As new devices are added, this approach turns out to be cumbersome.
Separate the clock names in individual arrays required by each variant,
in a struct clk_bulk_data. Add a pointer field to the driver data struct
which points to their respective clock names, and rework the clock usage
code to use the clk_bulk_* API instead.
Signed-off-by: Kaustabh Chakraborty <kauschluss@disroot.org>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
|
|
Exynos7870's DSIM requires more time to stabilize its PLL. The current
timeout value, 1000, doesn't suffice. Increase the value to 3000, which
is just about enough as observed experimentally.
Signed-off-by: Kaustabh Chakraborty <kauschluss@disroot.org>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
|
|
The PLL_STABLE bit of DSIM_DPHY_STATUS is hardcoded to BIT(31), but
Exynos7870's DSIM has it in BIT(24) as per downstream kernel sources.
In order to support both, move this bit value to the driver data struct
and define it for every driver compatible. Reference the value from
there instead, in functions wherever required.
Signed-off-by: Kaustabh Chakraborty <kauschluss@disroot.org>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
|
|
Currently, PLL_P offset of DSIM_PLLCTRL is configurable in the driver
data, while PLL_M and PLL_S offsets are hardcoded as 4-bit and 1-bit
offsets respectively, but Exynos7870's DSIM have them at 3-bit and 0-bit
offsets as per downstream kernel sources.
In order to support both, move both offset values to the driver data
struct and define it for every driver compatible. Reference the values
from there instead, in functions wherever required.
Signed-off-by: Kaustabh Chakraborty <kauschluss@disroot.org>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
|
|
The VIDEO_MODE bit of DSIM_CONFIG is hardcoded to BIT(25), but
Exynos7870's DSIM has it in BIT(18) as per downstream kernel sources.
In order to support both, move this bit value to the driver data struct
and define it for every driver compatible. Reference the value from
there instead, in functions wherever required.
Signed-off-by: Kaustabh Chakraborty <kauschluss@disroot.org>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
|
|
The MAIN_VSA offset of DSIM_MSYNC is hardcoded to a 22-bit offset, but
Exynos7870's DSIM has it in a 16-bit offset as per the downstream kernel
sources.
In order to support both, move this offset value to the driver data
struct and define it for every driver compatible. Reference the value
from there instead, in functions wherever required.
Signed-off-by: Kaustabh Chakraborty <kauschluss@disroot.org>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
|
|
DSIM_CLKCTRL bit and offset values hardcoded in the driver:
name | bit/offset value
--------------------------+-----------------
DSIM_LANE_ESC_CLK_EN_CLK | 19
DSIM_LANE_ESC_CLK_EN_DATA | 20
DSIM_BYTE_CLKEN | 24
DSIM_ESC_CLKEN | 28
DSIM_TX_REQUEST_HSCLK | 31
DSIM_CLKCTRL bit and offset values in Exynos7870 DSIM as per downstream
kernel sources:
name | bit/offset value
--------------------------+-----------------
DSIM_LANE_ESC_CLK_EN_CLK | 8
DSIM_LANE_ESC_CLK_EN_DATA | 9
DSIM_BYTE_CLKEN | 17
DSIM_ESC_CLKEN | 16
DSIM_TX_REQUEST_HSCLK | 20
In order to support both, move all values to the driver data struct and
define it for every driver compatible. Reference the values from there
instead, in functions wherever required.
Signed-off-by: Kaustabh Chakraborty <kauschluss@disroot.org>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
|
|
Exynos7870's DSIM device doesn't require waiting for the header FIFO
during a MIPI DSI transfer. Add a flag in the driver data in order to
control said behavior.
Signed-off-by: Kaustabh Chakraborty <kauschluss@disroot.org>
Signed-off-by: Inki Dae <inki.dae@samsung.com
|
|
On Exynos7870 devices, enabling the display requires disabling
standby by writing to the SFRCTRL register. Add the register and related
bit values. Since this behavior isn't available on other SoCs, implement
a flag in the driver data struct indicating the availability of this
feature.
Signed-off-by: Kaustabh Chakraborty <kauschluss@disroot.org>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
|
|
Exynos7870's DSIM has separate registers for LINK and DPHY status. This
is in contrast to older variants in the driver which use a single
register for both.
Add a driver data flag which indicates that the device variant supports
the legacy status register. Change the register read calls
appropriately.
Suggested-by: Inki Dae <inki.dae@samsung.com>
Signed-off-by: Kaustabh Chakraborty <kauschluss@disroot.org>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
|
|
Backmerging to drm-misc-next to get fixes from v6.17-rc6.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
|
|
This is a backmerge of Linux 6.17-rc6, needed for msm,
also requested by misc.
Signed-off-by: Dave Airlie <airlied@redhat.com>
|
|
Since commit 63d00be69348fda4 ("PM: runtime: Allow unassigned
->runtime_suspend|resume callbacks"), unassigned
.runtime_{suspend,resume}() callbacks are treated the same as dummy
callbacks that just return zero.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Liu Ying <victor.liu@nxp.com>
Signed-off-by: Liu Ying <victor.liu@nxp.com>
Link: https://lore.kernel.org/r/c7436cda28409f0080dca6cd2ca13f142d6dc489.1756999913.git.geert+renesas@glider.be
|
|
IT6263 supports HDMI vendor specific infoframe. The infoframe header
and payload are configurable via NULL packet registers. The infoframe
is enabled and disabled via PKT_NULL_CTRL register. Add the HDMI vendor
specific infoframe support.
Signed-off-by: Liu Ying <victor.liu@nxp.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250908-it6263-vendor-specific-infoframe-v2-1-3f2ebd9135ad@nxp.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
|
|
Instead of writing the first byte of the infoframe (and hoping that the
rest is default / zeroes), hook Audio InfoFrame support into the
write_infoframe / clear_infoframes callbacks and use
drm_atomic_helper_connector_hdmi_update_audio_infoframe() to write the
frame.
Acked-by: Maxime Ripard <mripard@kernel.org>
Link: https://lore.kernel.org/r/20250903-adv7511-audio-infoframe-v1-2-05b24459b9a4@oss.qualcomm.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
|
|
Instead of disabling and then reenabling AVI infoframe, use the
recommended way of updating it on the fly: latch current values using
the ADV7511_REG_INFOFRAME_UPDATE register.
Acked-by: Maxime Ripard <mripard@kernel.org>
Link: https://lore.kernel.org/r/20250903-adv7511-audio-infoframe-v1-1-05b24459b9a4@oss.qualcomm.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
|
|
Add support for the transparent Realtek RTD2171 DP-to-HDMI bridge.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20250908-topic-x1e80100-hdmi-v3-2-c53b0f2bc2fb@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
|
|
When no other driver selects CONFIG_VIDEOMODE_HELPERS but
CONFIG_DRM_CDNS_DSI is enabled, there is a linker or modpost error:
ERROR: modpost: "drm_display_mode_to_videomode" [drivers/gpu/drm/bridge/cadence/cdns-dsi.ko] undefined!
Select VIDEOMODE_HELPERS to ensure that this helper function is
available to the driver.
Fixes: ce4bc5ca7c1d ("drm/bridge: cdns-dsi: Use video mode and clean up cdns_dsi_mode2cfg()")
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250821-cdns-videohelpers-v1-1-853e021908cf@kernel.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
|
|
Instead of using the "sha1" crypto_shash, simply call the sha1() library
function. This is simpler and faster.
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Reviewed-by: Chen-Yu Tsai <wenst@chromium.org>
Link: https://patch.msgid.link/20250821175613.14717-1-ebiggers@kernel.org
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
|
|
The bridge has three bootstrap pins which are sampled to determine the
frequency of the external reference clock. The driver will also
(over)write that setting. But it seems this is racy after the bridge is
enabled. It was observed that although the driver write the correct
value (by sniffing on the I2C bus), the register has the wrong value.
The datasheet states that the GPIO lines have to be stable for at least
5us after asserting the EN signal. Thus, there seems to be some logic
which samples the GPIO lines and this logic appears to overwrite the
register value which was set by the driver. Waiting 20us after
asserting the EN line resolves this issue.
Fixes: a095f15c00e2 ("drm/bridge: add support for sn65dsi86 bridge driver")
Signed-off-by: Michael Walle <mwalle@kernel.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://lore.kernel.org/r/20250821122341.1257286-1-mwalle@kernel.org
|
|
Use drm_bridge_chain_get_last_bridge() instead of open coding a loop with
two invocations of drm_bridge_get_next_bridge() per iteration.
Besides being cleaner and more efficient, this change is necessary in
preparation for drm_bridge_get_next_bridge() to get a reference to the
returned bridge.
Reviewed-by: Maxime Ripard <mripard@kernel.org>
Reviewed-by: Liu Ying <victor.liu@nxp.com>
Link: https://lore.kernel.org/r/20250801-drm-bridge-alloc-getput-drm_bridge_get_next_bridge-v2-3-888912b0be13@bootlin.com
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
|
|
ADV75xx hardware supports sending SPD InfoFrame over the HDMI link. Also
it provides support for two generic (Spare) InfoFrames. Use those
capabilities to be able to send SPD and HDMI Vendor-Specific Infoframes.
Reviewed-by: Maxime Ripard <mripard@kernel.org>
Link: https://lore.kernel.org/r/20250827-adv7511-infoframes-v1-1-f89b9690f89c@oss.qualcomm.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
|
|
The DW DP TX Controller is compliant with the DisplayPort Specification
Version 1.4 with the following features:
* DisplayPort 1.4a
* Main Link: 1/2/4 lanes
* Main Link Support 1.62Gbps, 2.7Gbps, 5.4Gbps and 8.1Gbps
* AUX channel 1Mbps
* Single Stream Transport(SST)
* Multistream Transport (MST)
* Type-C support (alternate mode)
* HDCP 2.2, HDCP 1.3
* Supports up to 8/10 bits per color component
* Supports RBG, YCbCr4:4:4, YCbCr4:2:2, YCbCr4:2:0
* Pixel clock up to 594MHz
* I2S, SPDIF audio interface
Add library with common helpers to make it can be shared with
other SoC.
Signed-off-by: Andy Yan <andy.yan@rock-chips.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Tested-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Link: https://lore.kernel.org/r/20250822063959.692098-3-andyshrk@163.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
|
