summaryrefslogtreecommitdiff
path: root/drivers/gpu/drm/i915
AgeCommit message (Collapse)Author
5 daysMerge tag 'drm-next-2025-12-05' of https://gitlab.freedesktop.org/drm/kernelLinus Torvalds
Pull more drm updates from Dave Airlie: "There was some additional intel code for color operations we wanted to land. However I discovered I missed a pull for the xe vfio driver which I had sorted into 6.20 in my brain, until Thomas mentioned it. This contains the xe vfio code, a bunch of xe fixes that were waiting and the i915 color management support. I'd like to include it as part of keeping the two main vendors on the same page and giving a good cross-driver experience for userspace when it starts using it. vfio: - add a vfio_pci variant driver for Intel xe/i915 display: - add plane color management support xe: - Add scope-based cleanup helper for runtime PM - vfio xe driver prerequisites and exports - fix vfio link error - Fix a memory leak - Fix a 64-bit division - vf migration fix - LRC pause fix" * tag 'drm-next-2025-12-05' of https://gitlab.freedesktop.org/drm/kernel: (25 commits) drm/i915/color: Enable Plane Color Pipelines drm/i915/color: Add 3D LUT to color pipeline drm/i915/color: Add registers for 3D LUT drm/i915/color: Program Plane Post CSC Registers drm/i915/color: Program Pre-CSC registers drm/i915/color: Add framework to program PRE/POST CSC LUT drm/i915: Add register definitions for Plane Post CSC drm/i915: Add register definitions for Plane Degamma drm/i915/color: Add plane CTM callback for D12 and beyond drm/i915/color: Preserve sign bit when int_bits is Zero drm/i915/color: Add framework to program CSC drm/i915/color: Create a transfer function color pipeline drm/i915/color: Add helper to create intel colorop drm/i915: Add intel_color_op drm/i915/display: Add identifiers for driver specific blocks drm/xe/pf: fix VFIO link error drm/xe: Protect against unset LRC when pausing submissions drm/xe/vf: Start re-emission from first unsignaled job during VF migration drm/xe/pf: Use div_u64 when calculating GGTT profile drm/xe: Fix memory leak when handling pagefault vma ...
5 daysMerge tag 'vfio-v6.19-rc1' of https://github.com/awilliam/linux-vfioLinus Torvalds
Pull VFIO updates from Alex Williamson: - Move libvfio selftest artifacts in preparation of more tightly coupled integration with KVM selftests (David Matlack) - Fix comment typo in mtty driver (Chu Guangqing) - Support for new hardware revision in the hisi_acc vfio-pci variant driver where the migration registers can now be accessed via the PF. When enabled for this support, the full BAR can be exposed to the user (Longfang Liu) - Fix vfio cdev support for VF token passing, using the correct size for the kernel structure, thereby actually allowing userspace to provide a non-zero UUID token. Also set the match token callback for the hisi_acc, fixing VF token support for this this vfio-pci variant driver (Raghavendra Rao Ananta) - Introduce internal callbacks on vfio devices to simplify and consolidate duplicate code for generating VFIO_DEVICE_GET_REGION_INFO data, removing various ioctl intercepts with a more structured solution (Jason Gunthorpe) - Introduce dma-buf support for vfio-pci devices, allowing MMIO regions to be exposed through dma-buf objects with lifecycle managed through move operations. This enables low-level interactions such as a vfio-pci based SPDK drivers interacting directly with dma-buf capable RDMA devices to enable peer-to-peer operations. IOMMUFD is also now able to build upon this support to fill a long standing feature gap versus the legacy vfio type1 IOMMU backend with an implementation of P2P support for VM use cases that better manages the lifecycle of the P2P mapping (Leon Romanovsky, Jason Gunthorpe, Vivek Kasireddy) - Convert eventfd triggering for error and request signals to use RCU mechanisms in order to avoid a 3-way lockdep reported deadlock issue (Alex Williamson) - Fix a 32-bit overflow introduced via dma-buf support manifesting with large DMA buffers (Alex Mastro) - Convert nvgrace-gpu vfio-pci variant driver to insert mappings on fault rather than at mmap time. This conversion serves both to make use of huge PFNMAPs but also to both avoid corrected RAS events during reset by now being subject to vfio-pci-core's use of unmap_mapping_range(), and to enable a device readiness test after reset (Ankit Agrawal) - Refactoring of vfio selftests to support multi-device tests and split code to provide better separation between IOMMU and device objects. This work also enables a new test suite addition to measure parallel device initialization latency (David Matlack) * tag 'vfio-v6.19-rc1' of https://github.com/awilliam/linux-vfio: (65 commits) vfio: selftests: Add vfio_pci_device_init_perf_test vfio: selftests: Eliminate INVALID_IOVA vfio: selftests: Split libvfio.h into separate header files vfio: selftests: Move vfio_selftests_*() helpers into libvfio.c vfio: selftests: Rename vfio_util.h to libvfio.h vfio: selftests: Stop passing device for IOMMU operations vfio: selftests: Move IOVA allocator into iova_allocator.c vfio: selftests: Move IOMMU library code into iommu.c vfio: selftests: Rename struct vfio_dma_region to dma_region vfio: selftests: Upgrade driver logging to dev_err() vfio: selftests: Prefix logs with device BDF where relevant vfio: selftests: Eliminate overly chatty logging vfio: selftests: Support multiple devices in the same container/iommufd vfio: selftests: Introduce struct iommu vfio: selftests: Rename struct vfio_iommu_mode to iommu_mode vfio: selftests: Allow passing multiple BDFs on the command line vfio: selftests: Split run.sh into separate scripts vfio: selftests: Move run.sh into scripts directory vfio/nvgrace-gpu: wait for the GPU mem to be ready vfio/nvgrace-gpu: Inform devmem unmapped after reset ...
5 daysMerge tag 'pci-v6.19-changes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci Pull PCI updates from Bjorn Helgaas: "Enumeration: - Enable host bridge emulation for PCI_DOMAINS_GENERIC platforms (Dan Williams) - Switch vmd from custom domain number allocator to the common allocator to prevent a potential race with new non-VMD buses (Dan Williams) - Enable Precision Time Measurement (PTM) only if device advertises support for a relevant role, to prevent invalid PTM Requests that cause ACS violations that are reported as AER Uncorrectable Non-Fatal errors (Mika Westerberg) Resource management: - Prevent resource tree corruption when BAR resize fails (Ilpo Järvinen) - Restore BARs to the original size if a BAR resize fails (Ilpo Järvinen) - Remove BAR release from BAR resize attempts by the xe, i915, and amdgpu drivers so the PCI core can restore BARs if the resize fails (Ilpo Järvinen) - Move Resizable BAR code to rebar.c (Ilpo Järvinen) - Add pci_rebar_size_supported() and use it in i915 and xe (Ilpo Järvinen) - Add pci_rebar_get_max_size() and use it in xe and amdgpu (Ilpo Järvinen) Power management and error handling: - For drivers using PCI legacy suspend, save config state at suspend so that state (not any earlier state from enumeration, probe, or error recovery) will be restored when resuming (Lukas Wunner) - For devices with no driver or a driver that lacks power management, save config state at hibernate so that state (not any earlier state from enumeration, probe, or error recovery) will be restored when resuming (Lukas Wunner) - Save device config space on device addition, before driver binding, so error recovery works more reliably (Lukas Wunner) - Drop pci_save_state() from several drivers that no longer need it since the PCI core always does it and pci_restore_state() no longer invalidates the saved state (Lukas Wunner) - Document use of pci_save_state() by drivers to capture the state they want restored during error recovery (Lukas Wunner) Power control: - Add a struct pci_ops.assert_perst() function pointer to assert/deassert PCIe PERST# and implement it for the qcom driver (Krishna Chaitanya Chundru) - Add DT binding and pwrctrl driver for the Toshiba TC9563 PCIe switch, which must be held in reset after poweron so the pwrctrl driver can configure the switch via I2C before bringing up the links (Krishna Chaitanya Chundru) Endpoint framework: - Convert the endpoint doorbell test to use a threaded IRQ to fix a 'sleeping while atomic' issue (Bhanu Seshu Kumar Valluri) - Add endpoint VNTB MSI doorbell support to reduce latency between host and endpoint (Frank Li) New native PCIe controller drivers: - Add CIX Sky1 host controller DT binding and driver (Hans Zhang) - Add NXP S32G host controller DT binding and driver (Vincent Guittot) - Add Renesas RZ/G3S host controller DT binding and driver (Claudiu Beznea) - Add SpacemiT K1 host controller DT binding and driver (Alex Elder) Amlogic Meson PCIe controller driver: - Update DT binding to name DBI region 'dbi', not 'elbi', and update driver to support both (Manivannan Sadhasivam) Apple PCIe controller driver: - Move struct pci_host_bridge allocation from pci_host_common_init() to callers, which significantly simplifies pcie-apple (Marc Zyngier) Broadcom STB PCIe controller driver: - Disable advertising ASPM L0s support correctly (Jim Quinlan) - Add a panic/die handler to print diagnostic info in case PCIe caused an unrecoverable abort (Jim Quinlan) Cadence PCIe controller driver: - Add module support for Cadence platform host and endpoint controller driver (Manikandan K Pillai) - Split headers into 'legacy' (LGA) and 'high perf' (HPA) to prepare for new CIX Sky1 driver (Manikandan K Pillai) MediaTek PCIe controller driver: - Convert DT binding to YAML schema (Christian Marangi) - Add Airoha AN7583 DT compatible and driver support (Christian Marangi) Qualcomm PCIe controller driver: - Add Qualcomm Kaanapali to SM8550 DT binding (Qiang Yu) - Add required 'power-domains' and 'resets' to qcom sa8775p, sc7280, sc8280xp, sm8150, sm8250, sm8350, sm8450, sm8550, x1e80100 DT schemas (Krzysztof Kozlowski) - Look up OPP using both frequency and data rate (not just frequency) so RPMh votes can account for both (Krishna Chaitanya Chundru) Rockchip DesignWare PCIe controller driver: - Add Rockchip RK3528 compatible strings in DT binding (Yao Zi) STMicroelectronics STM32MP25 PCIe controller driver: - Fix a race between link training and endpoint register initialization (Christian Bruel) - Align endpoint allocations to match the ATU requirements (Christian Bruel) Synopsys DesignWare PCIe controller driver: - Clear L1 PM Substate Capability 'Supported' bits unless glue driver says it's supported, which prevents users from enabling non-working L1SS. Currently only qcom and tegra194 support L1SS (Bjorn Helgaas) - Remove now-superfluous L1SS disable code from tegra194 (Bjorn Helgaas) - Configure L1SS support in dw-rockchip when DT says 'supports-clkreq' (Shawn Lin) TI Keystone PCIe controller driver: - Fail the probe instead of silently succeeding if ks_pcie_of_data didn't specify Root Complex or Endpoint mode (Siddharth Vadapalli) - Make keystone buildable as a loadable module, except on ARM32 where hook_fault_code() is __init (Siddharth Vadapalli)" * tag 'pci-v6.19-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci: (100 commits) MAINTAINERS: Add Manivannan Sadhasivam as PCI/pwrctrl maintainer MAINTAINERS: Add CIX Sky1 PCIe controller driver maintainer PCI: sky1: Add PCIe host support for CIX Sky1 dt-bindings: PCI: Add CIX Sky1 PCIe Root Complex bindings PCI: cadence: Add support for High Perf Architecture (HPA) controller MAINTAINERS: Add NXP S32G PCIe controller driver maintainer PCI: s32g: Add NXP S32G PCIe controller driver (RC) PCI: dwc: Add register and bitfield definitions dt-bindings: PCI: s32g: Add NXP S32G PCIe controller PCI: Add Renesas RZ/G3S host controller driver PCI: host-generic: Move bridge allocation outside of pci_host_common_init() dt-bindings: PCI: Add Renesas RZ/G3S PCIe controller binding PCI: Validate pci_rebar_size_supported() input Documentation: PCI: Amend error recovery doc with pci_save_state() rules treewide: Drop pci_save_state() after pci_restore_state() PCI/ERR: Ensure error recoverability at all times PCI/PM: Stop needlessly clearing state_saved on enumeration and thaw PCI/PM: Reinstate clearing state_saved in legacy and !PM codepaths PCI: dw-rockchip: Configure L1SS support PCI: tegra194: Remove unnecessary L1SS disable code ...
6 daysdrm/i915/color: Enable Plane Color PipelinesUma Shankar
Expose color pipeline and add ability to program it. v2: Set bit to enable multisegmented lut v3: s/drm_color_lut_32/drm_color_lut32 (Simon) v4: - Fix dsb programming - Remove multi-segment LUT, they will be added in later patches - Add pipeline only to TGL+ - Code Refactor Reviewed-by: Suraj Kandpal <suraj.kandpal@intel.com> Signed-off-by: Chaitanya Kumar Borah <chaitanya.kumar.borah@intel.com> Signed-off-by: Uma Shankar <uma.shankar@intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patch.msgid.link/20251203085211.3663374-16-uma.shankar@intel.com
6 daysdrm/i915/color: Add 3D LUT to color pipelineChaitanya Kumar Borah
Add helpers to program the 3D LUT registers and arm them. LUT_3D_READY in LUT_3D_CLT is cleared off by the HW once the LUT buffer is loaded into it's internal working RAM. So by the time we try to load/commit new values, we expect it to be cleared off. If not, log an error and return without writing new values. Do it only when writing with MMIO. There is no way to read register within DSB execution. v2: - Add information regarding LUT_3D_READY to commit message (Jani) - Log error instead of a drm_warn and return without committing changes if 3DLUT HW is not ready to accept new values. - Refactor intel_color_crtc_has_3dlut() Also remove Gen10 check (Suraj) v3: - Addressed review comments (Suraj) Reviewed-by: Suraj Kandpal <suraj.kandpal@intel.com> Signed-off-by: Chaitanya Kumar Borah <chaitanya.kumar.borah@intel.com> Signed-off-by: Uma Shankar <uma.shankar@intel.com> Link: https://patch.msgid.link/20251203085211.3663374-15-uma.shankar@intel.com Signed-off-by: Jani Nikula <jani.nikula@intel.com>
6 daysdrm/i915/color: Add registers for 3D LUTChaitanya Kumar Borah
Add registers needed to program 3D LUT v2: - Follow convention documented in i915_reg.h (Jani) - Removing space in trailer (Suraj) - Move registers to intel_color_regs.h BSpec: 69378, 69379, 69380 Reviewed-by: Suraj Kandpal <suraj.kandpal@intel.com> Signed-off-by: Chaitanya Kumar Borah <chaitanya.kumar.borah@intel.com> Signed-off-by: Uma Shankar <uma.shankar@intel.com> Link: https://patch.msgid.link/20251203085211.3663374-14-uma.shankar@intel.com Signed-off-by: Jani Nikula <jani.nikula@intel.com>
6 daysdrm/i915/color: Program Plane Post CSC RegistersUma Shankar
Extract the LUT and program plane post csc registers. v2: Add DSB support v3: Add support for single segment 1D LUT v4: - s/drm_color_lut_32/drm_color_lut32 (Simon) - Move declaration to beginning of the function (Suraj) - Remove multisegmented code, add it later - Remove dead code for SDR planes, add it later v5: - Fix iterator issues v6: Removed redundant variable (Suraj) Reviewed-by: Suraj Kandpal <suraj.kandpal@intel.com> Signed-off-by: Uma Shankar <uma.shankar@intel.com> Signed-off-by: Chaitanya Kumar Borah <chaitanya.kumar.borah@intel.com> Link: https://patch.msgid.link/20251203085211.3663374-13-uma.shankar@intel.com Signed-off-by: Jani Nikula <jani.nikula@intel.com>
6 daysdrm/i915/color: Program Pre-CSC registersUma Shankar
Add callback to program Pre-CSC LUT for TGL and beyond v2: Add DSB support v3: Add support for single segment 1D LUT color op v4: - s/drm_color_lut_32/drm_color_lut32/ (Simon) - Change commit message (Suraj) - Improve comments (Suraj) - Remove multisegmented programming, to be added later - Remove dead code for SDR planes, add when needed BSpec: 50411, 50412, 50413, 50414 Reviewed-by: Suraj Kandpal <suraj.kandpal@intel.com> Signed-off-by: Uma Shankar <uma.shankar@intel.com> Signed-off-by: Chaitanya Kumar Borah <chaitanya.kumar.borah@intel.com> Link: https://patch.msgid.link/20251203085211.3663374-12-uma.shankar@intel.com Signed-off-by: Jani Nikula <jani.nikula@intel.com>
6 daysdrm/i915/color: Add framework to program PRE/POST CSC LUTUma Shankar
Add framework that will help in loading LUT to Pre/Post CSC color blocks. v2: Add dsb support v3: Align enum names v4: Propagate change in lut data to crtc_state Reviewed-by: Suraj Kandpal <suraj.kandpal@intel.com> Signed-off-by: Uma Shankar <uma.shankar@intel.com> Signed-off-by: Chaitanya Kumar Borah <chaitanya.kumar.borah@intel.com> Link: https://patch.msgid.link/20251203085211.3663374-11-uma.shankar@intel.com Signed-off-by: Jani Nikula <jani.nikula@intel.com>
6 daysdrm/i915: Add register definitions for Plane Post CSCUma Shankar
Add macros to define Plane Post CSC registers v2: - Add Plane Post CSC Gamma Multi Segment Enable bit - Add BSpec entries (Suraj) v3: - Fix checkpatch issues (Suraj) BSpec: 50403, 50404, 50405, 50406, 50409, 50410, Reviewed-by: Suraj Kandpal <suraj.kandpal@intel.com> Signed-off-by: Uma Shankar <uma.shankar@intel.com> Signed-off-by: Chaitanya Kumar Borah <chaitanya.kumar.borah@intel.com> Link: https://patch.msgid.link/20251203085211.3663374-10-uma.shankar@intel.com Signed-off-by: Jani Nikula <jani.nikula@intel.com>
6 daysdrm/i915: Add register definitions for Plane DegammaUma Shankar
Add macros to define Plane Degamma registers v2: - Add BSpec links (Suraj) v3: - Add Bspec links in trailer (Suraj) - Fix checkpatch issues (Suraj) BSpec: 50411, 50412, 50413, 50414 Reviewed-by: Suraj Kandpal <suraj.kandpal@intel.com> Signed-off-by: Uma Shankar <uma.shankar@intel.com> Signed-off-by: Chaitanya Kumar Borah <chaitanya.kumar.borah@intel.com> Link: https://patch.msgid.link/20251203085211.3663374-9-uma.shankar@intel.com Signed-off-by: Jani Nikula <jani.nikula@intel.com>
6 daysdrm/i915/color: Add plane CTM callback for D12 and beyondUma Shankar
Add callback for setting CTM block in platforms D12 and beyond v2: - Add dsb support - Pass plane_state as we are now doing a uapi to hw state copy - Add support for 3x4 matrix v3: - Add relevant header file - Fix typo (Suraj) - Add callback to TGL+ (Suraj) Reviewed-by: Suraj Kandpal <suraj.kandpal@intel.com> Signed-off-by: Chaitanya Kumar Borah <chaitanya.kumar.borah@intel.com> Signed-off-by: Uma Shankar <uma.shankar@intel.com> Link: https://patch.msgid.link/20251203085211.3663374-8-uma.shankar@intel.com Signed-off-by: Jani Nikula <jani.nikula@intel.com>
6 daysdrm/i915/color: Preserve sign bit when int_bits is ZeroChaitanya Kumar Borah
When int_bits == 0, we lose the sign bit when we do the range check and apply the mask. Fix this by ensuring a minimum of one integer bit, which guarantees space for the sign bit in fully fractional representations (e.g. S0.12) Reviewed-by: Suraj Kandpal <suraj.kandpal@intel.com> Signed-off-by: Chaitanya Kumar Borah <chaitanya.kumar.borah@intel.com> Signed-off-by: Uma Shankar <uma.shankar@intel.com> Link: https://patch.msgid.link/20251203085211.3663374-7-uma.shankar@intel.com Signed-off-by: Jani Nikula <jani.nikula@intel.com>
6 daysdrm/i915/color: Add framework to program CSCChaitanya Kumar Borah
Add framework to program CSC. It enables copying of matrix from UAPI to intel plane state. Also add helper functions which will eventually program values to hardware. Add a crtc state variable to track plane color change. v2: - Add crtc_state->plane_color_changed - Improve comments (Suraj) - s/intel_plane_*_color/intel_plane_color_* (Suraj) v3: - align parameters with open braces (Suraj) - Improve commit message (Suraj) v4: - Re-arrange variable declaration (Suraj) Reviewed-by: Suraj Kandpal <suraj.kandpal@intel.com> Signed-off-by: Chaitanya Kumar Borah <chaitanya.kumar.borah@intel.com> Signed-off-by: Uma Shankar <uma.shankar@intel.com> Link: https://patch.msgid.link/20251203085211.3663374-6-uma.shankar@intel.com Signed-off-by: Jani Nikula <jani.nikula@intel.com>
6 daysdrm/i915/color: Create a transfer function color pipelineChaitanya Kumar Borah
Add a color pipeline with three colorops in the sequence 1D LUT - 3x4 CTM - 1D LUT This pipeline can be used to do any color space conversion or HDR tone mapping v2: Change namespace to drm_plane_colorop* v3: Use simpler/pre-existing colorops for first iteration v4: - s/*_tf_*/*_color_* (Jani) - Refactor to separate files (Jani) - Add missing space in comment (Suraj) - Consolidate patch that adds/attaches pipeline property v5: - Limit MAX_COLOR_PIPELINES to 2.(Suraj) Increase it as and when we add more pipelines. - Remove redundant initialization code (Suraj) v6: - Use drm_plane_create_color_pipeline_property() (Arun) Now MAX_COLOR_PIPELINES is 1 Reviewed-by: Suraj Kandpal <suraj.kandpal@intel.com> Signed-off-by: Uma Shankar <uma.shankar@intel.com> Signed-off-by: Chaitanya Kumar Borah <chaitanya.kumar.borah@intel.com> Link: https://patch.msgid.link/20251203085211.3663374-5-uma.shankar@intel.com Signed-off-by: Jani Nikula <jani.nikula@intel.com>
6 daysdrm/i915/color: Add helper to create intel coloropChaitanya Kumar Borah
Add intel colorop create helper v2: - Make function names consistent (Jani) - Remove redundant code related to colorop state - Refactor code to separate files Reviewed-by: Suraj Kandpal <suraj.kandpal@intel.com> Signed-off-by: Chaitanya Kumar Borah <chaitanya.kumar.borah@intel.com> Signed-off-by: Uma Shankar <uma.shankar@intel.com> Link: https://patch.msgid.link/20251203085211.3663374-4-uma.shankar@intel.com Signed-off-by: Jani Nikula <jani.nikula@intel.com>
6 daysdrm/i915: Add intel_color_opChaitanya Kumar Borah
Add data structure to store intel specific details of colorop v2: - Remove dead code - Convert macro to function (Jani) - Remove colorop state as it is not being used - Refactor to separate file Reviewed-by: Suraj Kandpal <suraj.kandpal@intel.com> Signed-off-by: Chaitanya Kumar Borah <chaitanya.kumar.borah@intel.com> Signed-off-by: Uma Shankar <uma.shankar@intel.com> Link: https://patch.msgid.link/20251203085211.3663374-3-uma.shankar@intel.com Signed-off-by: Jani Nikula <jani.nikula@intel.com>
6 daysdrm/i915/display: Add identifiers for driver specific blocksChaitanya Kumar Borah
Add macros to identify intel specific color blocks. It will help in mapping drm_color_ops to intel color HW blocks v2:- Prefix enums with INTEL_* (Jani, Suraj) - Remove unnecessary comments (Jani) - Commit message improvements (Suraj) Reviewed-by: Suraj Kandpal <suraj.kandpal@intel.com> Signed-off-by: Chaitanya Kumar Borah <chaitanya.kumar.borah@intel.com> Signed-off-by: Uma Shankar <uma.shankar@intel.com> Link: https://patch.msgid.link/20251203085211.3663374-2-uma.shankar@intel.com Signed-off-by: Jani Nikula <jani.nikula@intel.com>
6 daysMerge tag 'drm-next-2025-12-03' of https://gitlab.freedesktop.org/drm/kernelLinus Torvalds
Pull drm updates from Dave Airlie: "There was a rather late merge of a new color pipeline feature, that some userspace projects are blocked on, and has seen a lot of work in amdgpu. This should have seen some time in -next. There is additional support for this for Intel, that if it arrives in the next day or two I'll pass it on in another pull request and you can decide if you want to take it. Highlights: - Arm Ethos NPU accelerator driver - new DRM color pipeline support - amdgpu will now run discrete SI/CIK cards instead of radeon, which enables vulkan support in userspace - msm gets gen8 gpu support - initial Xe3P support in xe Full detail summary: New driver: - Arm Ethos-U65/U85 accel driver Core: - support the drm color pipeline in vkms/amdgfx - add support for drm colorop pipeline - add COLOR PIPELINE plane property - add DRM_CLIENT_CAP_PLANE_COLOR_PIPELINE - throttle dirty worker with vblank - use drm_for_each_bridge_in_chain_scoped in drm's bridge code - Ensure drm_client_modeset tests are enabled in UML - add simulated vblank interrupt - use in drivers - dumb buffer sizing helper - move freeing of drm client memory to driver - crtc sharpness strength property - stop using system_wq in scheduler/drivers - support emergency restore in drm-client Rust: - make slice::as_flattened usable on all supported rustc - add FromBytes::from_bytes_prefix() method - remove redundant device ptr from Rust GEM object - Change how AlwaysRefCounted is implemented for GEM objects gpuvm: - Add deferred vm_bo cleanup to GPUVM (for rust) atomic: - cleanup and improve state handling interfaces buddy: - optimize block management dma-buf: - heaps: Create heap per CMA reserved location - improve userspace documentation dp: - add POST_LT_ADJ_REQ training sequence - DPCD dSC quirk for synaptics panamera devices - helpers to query branch DSC max throughput ttm: - Rename ttm_bo_put to ttm_bo_fini - allow page protection flags on risc-v - rework pipelined eviction fence handling amdgpu: - enable amdgpu by default for SI/CI dGPUs - enable DC by default on SI - refactor CIK/SI enablement - add ABM KMS property - Re-enable DM idle optimizations - DC Analog encoders support - Powerplay fixes for fiji/iceland - Enable DC on bonaire by default - HMM cleanup - Add new RAS framework - DML2.1 updates - YCbCr420 fixes - DC FP fixes - DMUB fixes - LTTPR fixes - DTBCLK fixes - DMU cursor offload handling - Userq validation improvements - Unify shutdown callback handling - Suspend improvements - Power limit code cleanup - SR-IOV fixes - AUX backlight fixes - DCN 3.5 fixes - HDMI compliance fixes - DCN 4.0.1 cursor updates - DCN interrupt fix - DC KMS full update improvements - Add additional HDCP traces - DCN 3.2 fixes - DP MST fixes - Add support for new SR-IOV mailbox interface - UQ reset support - HDP flush rework - VCE1 support amdkfd: - HMM cleanups - Relax checks on save area overallocations - Fix GPU mappings after prefetch radeon: - refactor CIK/SI enablement xe: - Initial Xe3P support - panic support on VRAM for display - fix stolen size check - Loosen used tracking restriction - New SR-IOV debugfs structure and debugfs updates - Hide the GPU madvise flag behind a VM_BIND flag - Always expose VRAM provisioning data on discrete GPUs - Allow VRAM mappings for userptr when used with SVM - Allow pinning of p2p dma-buf - Use per-tile debugfs where appropriate - Add documentation for Execution Queues - PF improvements - VF migration recovery redesign work - User / Kernel VRAM partitioning - Update Tile-based messages - Allow configfs to disable specific GT types - VF provisioning and migration improvements - use SVM range helpers in PT layer - Initial CRI support - access VF registers using dedicated MMIO view - limit number of jobs per exec queue - add sriov_admin sysfs tree - more crescent island specific support - debugfs residency counter - SRIOV migration work - runtime registers for GFX 35 i915: - add initial Xe3p_LPD display version 35 support - Enable LNL+ content adaptive sharpness filter - Use optimized VRR guardband - Enable Xe3p LT PHY - enable FBC support for Xe3p_LPD display - add display 30.02 firmware support - refactor SKL+ watermark latency setup - refactor fbdev handling - call i915/xe runtime PM via function pointers - refactor i915/xe stolen memory/display interfaces - use display version instead of gfx version in display code - extend i915_display_info with Type-C port details - lots of display cleanups/refactorings - set O_LARGEFILE in __create_shmem - skuip guc communication warning on reset - fix time conversions - defeature DRRS on LNL+ - refactor intel_frontbuffer split between i915/xe/display - convert inteL_rom interfaces to struct drm_device - unify display register polling interfaces - aovid lock inversion when pinning to GGTT on CHV/BXT+VTD panel: - Add KD116N3730A08/A12, chromebook mt8189 - JT101TM023, LQ079L1SX01, - GLD070WX3-SL01 MIPI DSI - Samsung LTL106AL0, Samsung LTL106AL01 - Raystar RFF500F-AWH-DNN - Winstar WF70A8SYJHLNGA - Wanchanglong w552946aaa - Samsung SOFEF00 - Lenovo X13s panel - ilitek-ili9881c - add rpi 5" support - visionx-rm69299 - add backlight support - edp - support AUI B116XAN02.0 bridge: - improve ref counting - ti-sn65dsi86 - add support for DP mode with HPD - synopsis: support CEC, init timer with correct freq - ASL CS5263 DP-to-HDMI bridge support nova-core: - introduce bitfield! macro - introduce safe integer converters - GSP inits to fully booted state on Ampere - Use more future-proof register for GPU identification nova-drm: - select NOVA_CORE - 64-bit only nouveau: - improve reclocking on tegra 186+ - add large page and compression support msm: - GPU: - Gen8 support: A840 (Kaanapali) and X2-85 (Glymur) - A612 support - MDSS: - Added support for Glymur and QCS8300 platforms - DPU: - Enabled Quad-Pipe support, unlocking higher resolutions support - Added support for Glymur platform - Documented DPU on QCS8300 platform as supported - DisplayPort: - Added support for Glymur platform - Added support lame remapping inside DP block - Documented DisplayPort controller on QCS8300 and SM6150/QCS615 as supported tegra: - NVJPG driver panfrost: - display JM contexts over debugfs - export JM contexts to userspace - improve error and job handling panthor: - support custom ASN_HASH for mt8196 - support mali-G1 GPU - flush shmem write before mapping buffers uncached - make timeout per-queue instead of per-job mediatek: - MT8195/88 HDMIv2/DDCv2 support rockchip: - dsi: add support for RK3368 amdxdna: - enhance runtime PM - last hardware error reading uapi - support firmware debug output - add resource and telemetry data uapi - preemption support imx: - add driver for HDMI TX Parallel audio interface ivpu: - add support for user-managed preemption buffer - add userptr support - update JSM firware API to 3.33.0 - add better alloc/free warnings - fix page fault in unbind all bos - rework bind/unbind of imported buffers - enable MCA ECC signalling - split fw runtime and global memory buffers - add fdinfo memory statistics tidss: - convert to drm logging - logging cleanup ast: - refactor generation init paths - add per chip generation detect_tx_chip - set quirks for each chip model atmel-hlcdc: - set LCDC_ATTRE register in plane disable - set correct values for plane scaler solomon: - use drm helper for get_modes and move_valid sitronix: - fix output position when clearing screens qaic: - support dma-buf exports - support new firmware's READ_DATA implementation - sahara AIC200 image table update - add sysfs support - add coredump support - add uevents support - PM support sun4i: - layer refactors to decouple plane from output - improve DE33 support vc4: - switch to generic CEC helpers komeda: - use drm_ logging functions vkms: - configfs support for display configuration vgem: - fix fence timer deadlock etnaviv: - add HWDB entry for GC8000 Nano Ultra VIP r6205" * tag 'drm-next-2025-12-03' of https://gitlab.freedesktop.org/drm/kernel: (1869 commits) Revert "drm/amd: Skip power ungate during suspend for VPE" drm/amdgpu: use common defines for HUB faults drm/amdgpu/gmc12: add amdgpu_vm_handle_fault() handling drm/amdgpu/gmc11: add amdgpu_vm_handle_fault() handling drm/amdgpu: use static ids for ACP platform devs drm/amdgpu/sdma6: Update SDMA 6.0.3 FW version to include UMQ protected-fence fix drm/amdgpu: Forward VMID reservation errors drm/amdgpu/gmc8: Delegate VM faults to soft IRQ handler ring drm/amdgpu/gmc7: Delegate VM faults to soft IRQ handler ring drm/amdgpu/gmc6: Delegate VM faults to soft IRQ handler ring drm/amdgpu/gmc6: Cache VM fault info drm/amdgpu/gmc6: Don't print MC client as it's unknown drm/amdgpu/cz_ih: Enable soft IRQ handler ring drm/amdgpu/tonga_ih: Enable soft IRQ handler ring drm/amdgpu/iceland_ih: Enable soft IRQ handler ring drm/amdgpu/cik_ih: Enable soft IRQ handler ring drm/amdgpu/si_ih: Enable soft IRQ handler ring drm/amd/display: fix typo in display_mode_core_structs.h drm/amd/display: fix Smart Power OLED not working after S4 drm/amd/display: Move RGB-type check for audio sync to DCE HW sequence ...
8 daysMerge tag 'drm-misc-next-2025-12-01-1' of ↵Dave Airlie
https://gitlab.freedesktop.org/drm/misc/kernel into drm-next Extra drm-misc-next for v6.19-rc1: UAPI Changes: - Add support for drm colorop pipeline. - Add COLOR PIPELINE plane property. - Add DRM_CLIENT_CAP_PLANE_COLOR_PIPELINE. Cross-subsystem Changes: - Attempt to use higher order mappings in system heap allocator. - Always taint kernel with sw-sync. Core Changes: - Small fixes to drm/gem. - Support emergency restore to drm-client. - Allocate and release fb_info in single place. - Rework ttm pipelined eviction fence handling. Driver Changes: - Support the drm color pipeline in vkms, amdgfx. - Add NVJPG driver for tegra. - Assorted small fixes and updates to rockchip, bridge/dw-hdmi-qp, panthor. - Add ASL CS5263 DP-to-HDMI simple bridge. - Add and improve support for G LD070WX3-SL01 MIPI DSI, Samsung LTL106AL0, Samsung LTL106AL01, Raystar RFF500F-AWH-DNN, Winstar WF70A8SYJHLNGA, Wanchanglong w552946aaa, Samsung SOFEF00, Lenovo X13s panel. - Add support for it66122 to it66121. - Support mali-G1 gpu in panthor. Signed-off-by: Dave Airlie <airlied@redhat.com> From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Link: https://patch.msgid.link/aa5cbd50-7676-4a59-bbed-e8428af86804@linux.intel.com
2025-11-25drm/i915/psr: Reject async flips when selective fetch is enabledVille Syrjälä
The selective fetch code doesn't handle asycn flips correctly. There is a nonsense check for async flips in intel_psr2_sel_fetch_config_valid() but that only gets called for modesets/fastsets and thus does nothing for async flips. Currently intel_async_flip_check_hw() is very unhappy as the selective fetch code pulls in planes that are not even async flips capable. Reject async flips when selective fetch is enabled, until someone fixes this properly (ie. disable selective fetch while async flips are being issued). Cc: stable@vger.kernel.org Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patch.msgid.link/20251105171015.22234-1-ville.syrjala@linux.intel.com Reviewed-by: Jouni Högander <jouni.hogander@intel.com> (cherry picked from commit a5f0cc8e0cd4007370af6985cb152001310cf20c) Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
2025-11-25drm/fb-helper: Allocate and release fb_info in single placeThomas Zimmermann
Move the calls to drm_fb_helper_alloc_info() from drivers into a single place in fbdev helpers. Allocates struct fb_info for a new framebuffer device. Then call drm_fb_helper_single_fb_probe() to create an fbdev screen buffer. Also release the instance on errors by calling drm_fb_helper_release_info(). Simplifies the code and fixes the error cleanup for some of the drivers. Regular release of the struct fb_info instance still happens in drm_fb_helper_fini() as before. v2: - remove error rollback in driver implementations (kernel test robot) - initialize info in TTM implementation (kernel test robot) Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Acked-by: Christian König <christian.koenig@amd.com> # radeon Acked-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com> # msm Acked-by: Javier Martinez Canillas <javierm@redhat.com> Link: https://patch.msgid.link/20251027081245.80262-1-tzimmermann@suse.de
2025-11-21Merge tag 'v6.18-rc6' into drm-nextDave Airlie
Linux 6.18-rc6 Backmerge in order to merge msm next Signed-off-by: Dave Airlie <airlied@redhat.com>
2025-11-18drm/i915/xe3: Restrict PTL intel_encoder_is_c10phy() to only PHY ADnyaneshwar Bhadane
On PTL, no combo PHY is connected to PORT B. However, PORT B can still be used for Type-C and will utilize the C20 PHY for eDP over Type-C. In such configurations, VBTs also enumerate PORT B. This leads to issues where PORT B is incorrectly identified as using the C10 PHY, due to the assumption that returning true for PORT B in intel_encoder_is_c10phy() would not cause problems. From PTL's perspective, only PORT A/PHY A uses the C10 PHY. Update the helper intel_encoder_is_c10phy() to return true only for PORT A/PHY on PTL. v2: Change the condition code style for ptl/wcl Bspec: 72571,73944 Fixes: 9d10de78a37f ("drm/i915/wcl: C10 phy connected to port A and B") Signed-off-by: Dnyaneshwar Bhadane <dnyaneshwar.bhadane@intel.com> Reviewed-by: Gustavo Sousa <gustavo.sousa@intel.com> Signed-off-by: Suraj Kandpal <suraj.kandpal@intel.com> Link: https://lore.kernel.org/r/20250922150317.2334680-4-dnyaneshwar.bhadane@intel.com (cherry picked from commit 8147f7a1c083fd565fb958824f7c552de3b2dc46) Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
2025-11-18drm/i915/display: Add definition for wcl as subplatformDnyaneshwar Bhadane
We will need to differentiate between WCL and PTL in intel_encoder_is_c10phy(). Since WCL and PTL use the same display architecture, let's define WCL as a subplatform of PTL to allow the differentiation. v2: Update commit message and reorder wcl define (Gustavo) Fixes: 3c0f211bc8fc ("drm/xe: Add Wildcat Lake device IDs to PTL list") Signed-off-by: Dnyaneshwar Bhadane <dnyaneshwar.bhadane@intel.com> Reviewed-by: Gustavo Sousa <gustavo.sousa@intel.com> Signed-off-by: Suraj Kandpal <suraj.kandpal@intel.com> Link: https://lore.kernel.org/r/20250922150317.2334680-3-dnyaneshwar.bhadane@intel.com (cherry picked from commit 4dfaae643e59cf3ab71b88689dce1b874f036f00) Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com> [Rodrigo added Fixes tag when porting it to fixes]
2025-11-18drm/pcids: Split PTL pciids group to make wcl subplatformDnyaneshwar Bhadane
To form the WCL platform as a subplatform of PTL in definition, WCL pci ids are splited into saparate group from PTL. So update the pciidlist struct to cover all the pci ids. v2: - Squash wcl description in single patch for display and xe.(jani,gustavo) Fixes: 3c0f211bc8fc ("drm/xe: Add Wildcat Lake device IDs to PTL list") Signed-off-by: Dnyaneshwar Bhadane <dnyaneshwar.bhadane@intel.com> Reviewed-by: Gustavo Sousa <gustavo.sousa@intel.com> Signed-off-by: Suraj Kandpal <suraj.kandpal@intel.com> Link: https://lore.kernel.org/r/20250922150317.2334680-2-dnyaneshwar.bhadane@intel.com (cherry picked from commit 32620e176443bf23ec81bfe8f177c6721a904864) Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com> [Rodrigo added the Fixes tag when porting it to fixes]
2025-11-17drm/i915/xe3lpd: Load DMC for Xe3_LPD version 30.02Dnyaneshwar Bhadane
Load the DMC for Xe3_LPD version 30.02. Fixes: 3c0f211bc8fc ("drm/xe: Add Wildcat Lake device IDs to PTL list") Signed-off-by: Dnyaneshwar Bhadane <dnyaneshwar.bhadane@intel.com> Reviewed-by: Gustavo Sousa <gustavo.sousa@intel.com> Reviewed-by: Chaitanya Kumar Borah <chaitanya.kumar.borah@intel.com> Link: https://lore.kernel.org/r/20251016131517.2032684-1-dnyaneshwar.bhadane@intel.com Signed-off-by: Gustavo Sousa <gustavo.sousa@intel.com> (cherry picked from commit a63db39a578b543f5e5719b9f14dd82d3b8648d1) Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com> [Rodrigo added the Fixes tag while cherry-picking to fixes]
2025-11-18Merge tag 'drm-intel-gt-next-2025-11-14' of ↵Dave Airlie
https://gitlab.freedesktop.org/drm/i915/kernel into drm-next Driver Changes: Fixes/improvements/new stuff: - Avoid lock inversion when pinning to GGTT on CHV/BXT+VTD (Janusz Krzysztofik) - Use standard API for seqcount read in TLB invalidation [gt] (Andi Shyti) Miscellaneous: - Wait longer for threads in migrate selftest on CHV/BXT+VTD (Janusz Krzysztofik) - Wait for page_sizes_gtt in gtt selftest on CHV/BXT+VTD (Janusz Krzysztofik) Signed-off-by: Dave Airlie <airlied@redhat.com> From: Tvrtko Ursulin <tursulin@igalia.com> Link: https://patch.msgid.link/aRdXOAKlTVX_b0en@linux
2025-11-14drm/i915/gt: Use pci_rebar_size_supported()Ilpo Järvinen
PCI core provides pci_rebar_size_supported() that helps in checking if an encoded BAR Size is supported for the BAR or not. Use it in i915_resize_lmem_bar() to simplify code. Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Jani Nikula <jani.nikula@intel.com> Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com> Acked-by: Christian König <christian.koenig@amd.com> Acked-by: Jani Nikula <jani.nikula@intel.com> Link: https://patch.msgid.link/20251113180053.27944-7-ilpo.jarvinen@linux.intel.com
2025-11-14drm/i915: Remove driver side BAR release before resizeIlpo Järvinen
PCI core handles releasing device's resources and their rollback in case of failure of a BAR resizing operation. Releasing resource prior to calling pci_resize_resource() prevents PCI core from restoring the BARs as they were. Remove driver-side release of BARs from the i915 driver. Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com> Link: https://patch.msgid.link/20251113162628.5946-10-ilpo.jarvinen@linux.intel.com
2025-11-14PCI: Fix restoring BARs on BAR resize rollback pathIlpo Järvinen
BAR resize operation is implemented in the pci_resize_resource() and pbus_reassign_bridge_resources() functions. pci_resize_resource() can be called either from __resource_resize_store() from sysfs or directly by the driver for the Endpoint Device. The pci_resize_resource() requires that caller has released the device resources that share the bridge window with the BAR to be resized as otherwise the bridge window is pinned in place and cannot be changed. pbus_reassign_bridge_resources() rolls back resources if the resize operation fails, but rollback is performed only for the bridge windows. Because releasing the device resources are done by the caller of the BAR resize interface, these functions performing the BAR resize do not have access to the device resources as they were before the resize. pbus_reassign_bridge_resources() could try __pci_bridge_assign_resources() after rolling back the bridge windows as they were, however, it will not guarantee the resource are assigned due to differences in how FW and the kernel assign the resources (alignment of the start address and tail). To perform rollback robustly, the BAR resize interface has to be altered to also release the device resources that share the bridge window with the BAR to be resized. Also, remove restoring from the entries failed list as saved list should now contain both the bridge windows and device resources so the extra restore is duplicated work. Some drivers (currently only amdgpu) want to prevent releasing some resources. Add exclude_bars param to pci_resize_resource() and make amdgpu pass its register BAR (BAR 2 or 5), which should never be released during resize operation. Normally 64-bit prefetchable resources do not share a bridge window with the 32-bit only register BAR, but there are various fallbacks in the resource assignment logic which may make the resources share the bridge window in rare cases. This change (together with the driver side changes) is to counter the resource releases that had to be done to prevent resource tree corruption in the ("PCI: Release assigned resource before restoring them") change. As such, it likely restores functionality in cases where device resources were released to avoid resource tree conflicts which appeared to be "working" when such conflicts were not correctly detected by the kernel. Reported-by: Simon Richter <Simon.Richter@hogyros.de> Link: https://lore.kernel.org/linux-pci/f9a8c975-f5d3-4dd2-988e-4371a1433a60@hogyros.de/ Reported-by: Alex Bennée <alex.bennee@linaro.org> Link: https://lore.kernel.org/linux-pci/874irqop6b.fsf@draig.linaro.org/ Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> [bhelgaas: squash amdgpu BAR selection from https://lore.kernel.org/r/20251114103053.13778-1-ilpo.jarvinen@linux.intel.com] Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Tested-by: Alex Bennée <alex.bennee@linaro.org> # AVA, AMD GPU Reviewed-by: Christian König <christian.koenig@amd.com> Link: https://patch.msgid.link/20251113162628.5946-7-ilpo.jarvinen@linux.intel.com
2025-11-13drm/i915/display: Add default case to mipi_exec_send_packetJonathan Cavitt
Add a default case to the switch case statement in mipi_exec_send_packet to prevent attempts to read an uninitialized ret value. It's unlikely the default case will ever occur during regular exeuction, but if more MIPI DSI Processor-to-Peripheral transaction types are ever added, then having this in place will be a useful safety guard. Signed-off-by: Jonathan Cavitt <jonathan.cavitt@intel.com> Fixes: 23db1577ce2d ("drm/i915/dsi: log send packet sequence errors") Reviewed-by: Jani Nikula <jani.nikula@intel.com> Link: https://patch.msgid.link/20251104164150.16795-2-jonathan.cavitt@intel.com Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2025-11-13drm/i915/ltphy: include intel_display_utils.h instead of i915_utils.hJani Nikula
Display code stopped using i915_utils.h in favour of intel_display_utils.h. Fix recent additions. Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Link: https://patch.msgid.link/20251112181342.107911-1-jani.nikula@intel.com Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2025-11-12vfio/gvt: Convert to get_region_info_capsJason Gunthorpe
Remove the duplicate code and change info to a pointer. Reviewed-by: Kevin Tian <kevin.tian@intel.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com> Link: https://lore.kernel.org/r/17-v2-2a9e24d62f1b+e10a-vfio_get_region_info_op_jgg@nvidia.com Signed-off-by: Alex Williamson <alex@shazbot.org>
2025-11-12vfio/gvt: Provide a get_region_info opJason Gunthorpe
Move it out of intel_vgpu_ioctl() and re-indent it. Reviewed-by: Kevin Tian <kevin.tian@intel.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com> Link: https://lore.kernel.org/r/13-v2-2a9e24d62f1b+e10a-vfio_get_region_info_op_jgg@nvidia.com Signed-off-by: Alex Williamson <alex@shazbot.org>
2025-11-12drm/i915/cursor: Initialize 845 vs 865 cursor size separatelyVille Syrjälä
The if+ternary combo used for the max cursor width initialization on 845/865 is rather cumbersome. Just split this into a straight up if ladder. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patch.msgid.link/20251107181126.5743-10-ville.syrjala@linux.intel.com Reviewed-by: Jani Nikula <jani.nikula@intel.com>
2025-11-12drm/i915/cursor: Extract intel_cursor_mode_config_init()Ville Syrjälä
Move the max cursor size initialization into intel_cursor.c so that all the platform specific details about cursors are concentrated in one file. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patch.msgid.link/20251107181126.5743-9-ville.syrjala@linux.intel.com Reviewed-by: Jani Nikula <jani.nikula@intel.com>
2025-11-12drm/i915: Use mode_config->cursor_width for cursor DDB allocationVille Syrjälä
Replace the hardcoded 256 with mode_config->cursor_width when doing the cursor DDB allocation. Currently 256 is correct for all SKL+, but this might change in the future. One less place to change should that happen. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patch.msgid.link/20251107181126.5743-8-ville.syrjala@linux.intel.com Reviewed-by: Jani Nikula <jani.nikula@intel.com>
2025-11-12drm/i915/wm: Use drm_get_format_info() in SKL+ cursor DDB allocationVille Syrjälä
Replace the technically inaccurate drm_format_info() with the accurate drm_get_format_info() in the SKL+ cursor DDB allocation code. Since we're only interested in the linear modifier here, the two functions do actually return the same information. But let's not use drm_format_info() to avoid setting a bad example. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patch.msgid.link/20251107181126.5743-7-ville.syrjala@linux.intel.com Reviewed-by: Jani Nikula <jani.nikula@intel.com>
2025-11-12drm/i915/fb: Init 'ret' in each error branch in intel_framebuffer_init()Ville Syrjälä
Make the order of things a bit less fragile in intel_framebuffer_init() by assigning 'ret' in each error branch instead of depending on some earlier assignment. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patch.msgid.link/20251107181126.5743-6-ville.syrjala@linux.intel.com Reviewed-by: Jani Nikula <jani.nikula@intel.com>
2025-11-12drm/i915: Nuke intel_plane_config.tilingVille Syrjälä
Use intel_fb_modifier_to_tiling() to convert the modifier into the fence tiling mode during BIOS FB readout, rather than hand rolling it. With this we can also stop tracking the tiling mode in the intel_plane_config. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patch.msgid.link/20251107181126.5743-5-ville.syrjala@linux.intel.com Reviewed-by: Jani Nikula <jani.nikula@intel.com>
2025-11-12drm/i915: Populate fb->format accurately in BIOS FB readoutVille Syrjälä
Use drm_get_format_info() instead of drm_format_info() to populate fb->format during the BIOS FB readout. The difference being that drm_get_format_info() knows about compressed formats whereas drm_format_info() doesn't. This doesn't actually matter in practice since the BIOS FB should never be compressed, but no reason we shouldn't use the more accurate function here anyway. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patch.msgid.link/20251107181126.5743-4-ville.syrjala@linux.intel.com Reviewed-by: Jani Nikula <jani.nikula@intel.com>
2025-11-12drm/i915: Pass drm_format_info into plane->max_stride()Ville Syrjälä
Pass the format info into plane->max_stride() from the caller instead of doing yet another drm_format_info() lookup on the spot. drm_format_info() is both rather expensive, and technically incorrect since it doesn't return the correct format info for compressed formats (though that doesn't actually matter for the current .max_stride() implementations since they are just interested in the cpp value). Most callers already have the format info available. The only exception is intel_dumb_fb_max_stride() where we shall use the actually correct drm_get_format_info() variant. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patch.msgid.link/20251107181126.5743-3-ville.syrjala@linux.intel.com Reviewed-by: Jani Nikula <jani.nikula@intel.com>
2025-11-12drm/i915: Introduce intel_dumb_fb_max_stride()Ville Syrjälä
Wrap intel_plane_fb_max_stride() in intel_dumb_fb_max_stride() for the purposes of dumb fb creation. I want to change intel_plane_fb_max_stride() to take a 'struct drm_format_info' instead of the 'u32 pixel_format' so we need an excplicit format info lookup in the dumb fb path and I don't really want to have that in i915_gem_dumb_create() directly. This makes intel_plane_fb_max_stride() internal to the display code again, and thus we can pass in struct intel_display instead of struct drm_device. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patch.msgid.link/20251107181126.5743-2-ville.syrjala@linux.intel.com Reviewed-by: Jani Nikula <jani.nikula@intel.com>
2025-11-12drm/i915/dp_mst: Disable Panel ReplayImre Deak
Disable Panel Replay on MST links until it's properly implemented. For instance the required VSC SDP is not programmed on MST and FEC is not enabled if Panel Replay is enabled. Fixes: 3257e55d3ea7 ("drm/i915/panelreplay: enable/disable panel replay") Closes: https://gitlab.freedesktop.org/drm/i915/kernel/-/issues/15174 Cc: Jouni Högander <jouni.hogander@intel.com> Cc: Animesh Manna <animesh.manna@intel.com> Cc: stable@vger.kernel.org # v6.8+ Reviewed-by: Jouni Högander <jouni.hogander@intel.com> Signed-off-by: Imre Deak <imre.deak@intel.com> Link: https://patch.msgid.link/20251107124141.911895-1-imre.deak@intel.com (cherry picked from commit e109f644b871df8440c886a69cdce971ed533088) Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
2025-11-11drm/i915/dpio: Use the intel_de_wait_ms() out valueVille Syrjälä
Utilize the 'out_value' output parameter of intel_de_wait_ms() instead of re-reading the DPLL/DPIO_PHY_STATUS register after polling has finished. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patch.msgid.link/20251110172756.2132-17-ville.syrjala@linux.intel.com Reviewed-by: Suraj Kandpal <suraj.kandpal@intel.com> Acked-by: Jani Nikula <jani.nikula@intel.com>
2025-11-11drm/i915/power: Use the intel_de_wait_ms() out valueVille Syrjälä
Utilize the 'out_value' output parameter of intel_de_wait_ms() instead of re-reading the PHY_CONTROL register after polling has finished. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patch.msgid.link/20251110172756.2132-16-ville.syrjala@linux.intel.com Reviewed-by: Suraj Kandpal <suraj.kandpal@intel.com> Acked-by: Jani Nikula <jani.nikula@intel.com>
2025-11-11drm/i915/de: Replace __intel_de_wait_for_register_nowl() with ↵Ville Syrjälä
intel_de_wait_fw_us_atomic() Nuke the remaining _nowl() stuff from the wakelock code in the form of __intel_de_wait_for_register_nowl(), and replace it with intel_de_wait_fw_us_atomic() that uses the low level _fw() register accessors in line with the rest of the code. No change in behaviour since wakelocks are only supported on xe, and xe doesn't have uncore.lock nor unclaimed register detection stuff. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patch.msgid.link/20251110172756.2132-15-ville.syrjala@linux.intel.com Reviewed-by: Suraj Kandpal <suraj.kandpal@intel.com> Acked-by: Jani Nikula <jani.nikula@intel.com>
2025-11-11drm/i915/de: Nuke wakelocks from intel_de_wait_fw_ms()Ville Syrjälä
The low level _fw() register accessors aren't supposed to grab the wakelock. Stop doing so in intel_de_wait_fw_ms(). Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patch.msgid.link/20251110172756.2132-14-ville.syrjala@linux.intel.com Reviewed-by: Suraj Kandpal <suraj.kandpal@intel.com> Acked-by: Jani Nikula <jani.nikula@intel.com>
2025-11-11drm/i915/de: Replace __intel_de_rmw_nowl() with intel_de_rmw_fw()Ville Syrjälä
We already have the lower level intel_de_*_fw() stuff, so use that instead of hand rolling something custom for the DMC wakelock stuff. As the wakelock stuff exists only on platforms supported by the xe driver this doesn't even result in any functional changes since xe doesn't have uncore.lock nor unclaimed register access detection. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patch.msgid.link/20251110172756.2132-13-ville.syrjala@linux.intel.com Reviewed-by: Suraj Kandpal <suraj.kandpal@intel.com> Acked-by: Jani Nikula <jani.nikula@intel.com>
generated by cgit v1.2.3 (git 2.46.0) at 2025-12-10 07:19:54 +0000