| Age | Commit message (Collapse) | Author |
|---|
|
Align pitch to multiples of 8 pixels for bpp values that do not map
to RGB formats. The call to drm_driver_color_mode_format() fails with
DRM_INVALID_FORMAT in these cases. Fall back to manually computing
the pitch alignment from which drm_mode_size_dumb() can compute the
correct pitch.
Fixes userspace that allocates dumb buffers for YUV formats, where
bpp equals 12. A common example is the IGT kms_getfb test.
v2:
- ignore width in calculation
Suggested-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Fixes: b1d0e470f881 ("drm/imx/ipuv3: Compute dumb-buffer sizes with drm_mode_size_dumb()")
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Philipp Zabel <p.zabel@pengutronix.de>
Cc: Shawn Guo <shawnguo@kernel.org>
Cc: Sascha Hauer <s.hauer@pengutronix.de>
Cc: Pengutronix Kernel Team <kernel@pengutronix.de>
Cc: Fabio Estevam <festevam@gmail.com>
Cc: dri-devel@lists.freedesktop.org
Cc: imx@lists.linux.dev
Cc: linux-arm-kernel@lists.infradead.org
Tested-by: Philipp Zabel <p.zabel@pengutronix.de>
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Link: https://patch.msgid.link/20251104153832.189666-1-tzimmermann@suse.de
|
|
Call drm_mode_size_dumb() to compute dumb-buffer scanline pitch and
buffer size. The hardware requires the framebuffer width to be a
multiple of 8. The scanline pitch has to be large enough to support
this. Therefore compute the byte size of 8 pixels in the given color
mode and align the pitch accordingly.
v5:
- fix typo in commit description
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Cc: Philipp Zabel <p.zabel@pengutronix.de>
Cc: Shawn Guo <shawnguo@kernel.org>
Cc: Sascha Hauer <s.hauer@pengutronix.de>
Cc: Pengutronix Kernel Team <kernel@pengutronix.de>
Cc: Fabio Estevam <festevam@gmail.com>
Link: https://lore.kernel.org/r/20250821081918.79786-11-tzimmermann@suse.de
|
|
Call drm_mode_size_dumb() to compute dumb-buffer scanline pitch and
buffer size. Align the pitch to a multiple of 8.
Push the current calculation into the only direct caller imx. Imx's
hardware requires the framebuffer width to be aligned to 8. The
driver's current approach is actually incorrect, as it only guarantees
this implicitly and requires bpp to be a multiple of 8 already. A
later commit will fix this problem by aligning the scanline pitch
such that an aligned width still fits into each scanline's memory.
A number of other drivers are build on top of gem-dma helpers and
implement their own dumb-buffer allocation. These drivers invoke
drm_gem_dma_dumb_create_internal(), which is not affected by this
commit.
v5:
- avoid reset of arguments (Tomi)
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Link: https://lore.kernel.org/r/20250821081918.79786-4-tzimmermann@suse.de
|
|
The v6.13-rc2 release included a bunch of breaking changes,
specifically the MODULE_IMPORT_NS commit.
Backmerge in order to fix them before the next pull-request.
Include the fix from Stephen Roswell.
Caused by commit
25c3fd1183c0 ("drm/virtio: Add a helper to map and note the dma addrs and lengths")
Interacting with commit
cdd30ebb1b9f ("module: Convert symbol namespace to string literal")
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Link: https://patchwork.freedesktop.org/patch/msgid/20241209121717.2abe8026@canb.auug.org.au
Signed-off-by: Maarten Lankhorst <dev@lankhorst.se>
|
|
We stopped using the driver initialized date in commit 7fb8af6798e8
("drm: deprecate driver date") and (eventually) started returning "0"
for drm_version ioctl instead.
Finish the job, and remove the unused date member from struct
drm_driver, its initialization from drivers, along with the common
DRIVER_DATE macros.
v2: Also update drivers/accel (kernel test robot)
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Acked-by: Simon Ser <contact@emersion.fr>
Acked-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Acked-by: Lucas De Marchi <lucas.demarchi@intel.com>
Acked-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> # msm
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/1f2bf2543aed270a06f6c707fd6ed1b78bf16712.1733322525.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
|
The continual trickle of small conversion patches is grating on me, and
is really not helping. Just get rid of the 'remove_new' member
function, which is just an alias for the plain 'remove', and had a
comment to that effect:
/*
* .remove_new() is a relic from a prototype conversion of .remove().
* New drivers are supposed to implement .remove(). Once all drivers are
* converted to not use .remove_new any more, it will be dropped.
*/
This was just a tree-wide 'sed' script that replaced '.remove_new' with
'.remove', with some care taken to turn a subsequent tab into two tabs
to make things line up.
I did do some minimal manual whitespace adjustment for places that used
spaces to line things up.
Then I just removed the old (sic) .remove_new member function, and this
is the end result. No more unnecessary conversion noise.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Move the public header file drm_client_setup.h to the clients/
subdirectory and update all drivers. No functional changes.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241108154600.126162-3-tzimmermann@suse.de
|
|
Call drm_client_setup_with_color_mode() to run the kernel's default
client setup for DRM. Set fbdev_probe in struct drm_driver, so that
the client setup can start the common fbdev client.
v5:
- select DRM_CLIENT_SELECTION
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Philipp Zabel <p.zabel@pengutronix.de>
Cc: Shawn Guo <shawnguo@kernel.org>
Cc: Sascha Hauer <s.hauer@pengutronix.de>
Cc: Pengutronix Kernel Team <kernel@pengutronix.de>
Cc: Fabio Estevam <festevam@gmail.com>
Acked-by: Philipp Zabel <p.zabel@pengutronix.de>
Acked-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240924071734.98201-21-tzimmermann@suse.de
|
|
The imx-tve driver is the only remaining user of
imx_drm_connector_destroy(). Move the function to imx-tve.c
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Acked-by: Rob Herring <robh@kernel.org>
Tested-by: Chris Healy <cphealy@gmail.com>
Tested-by: Philipp Zabel <p.zabel@pengutronix.de> # on imx6q-nitrogen6x
Link: https://patchwork.freedesktop.org/patch/msgid/20240602-drm-imx-cleanup-v3-12-e549e2a43100@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
|
|
Based on grepping through the source code this driver appears to be
missing a call to drm_atomic_helper_shutdown() at system shutdown time
and at driver unbind time. Among other things, this means that if a
panel is in use that it won't be cleanly powered off at system
shutdown time.
The fact that we should call drm_atomic_helper_shutdown() in the case
of OS shutdown/restart and at driver remove (or unbind) time comes
straight out of the kernel doc "driver instance overview" in
drm_drv.c.
A few notes about this fix:
- When adding drm_atomic_helper_shutdown() to the unbind path, I added
it after drm_kms_helper_poll_fini() since that's when other drivers
seemed to have it.
- Technically with a previous patch, ("drm/atomic-helper:
drm_atomic_helper_shutdown(NULL) should be a noop"), we don't
actually need to check to see if our "drm" pointer is NULL before
calling drm_atomic_helper_shutdown(). We'll leave the "if" test in,
though, so that this patch can land without any dependencies. It
could potentially be removed later.
- This patch also makes sure to set the drvdata to NULL in the case of
bind errors to make sure that shutdown can't access freed data.
Suggested-by: Maxime Ripard <mripard@kernel.org>
Reviewed-by: Maxime Ripard <mripard@kernel.org>
Tested-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230901164111.RFT.13.I0a9940ff6f387d6acf4e71d8c7dbaff8c42e3aaa@changeid
|
|
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is (mostly) ignored
and this typically results in resource leaks. To improve here there is a
quest to make the remove callback return void. In the first step of this
quest all drivers are converted to .remove_new() which already returns
void.
Trivially convert the ipuv3 imx drivers from always returning zero in
the remove callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230507162616.1368908-23-u.kleine-koenig@pengutronix.de
|
|
Use the fbdev emulation that is optimized for DMA helpers. Avoids
possible shadow buffering and makes the code simpler.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230313155138.20584-9-tzimmermann@suse.de
|
|
The IPUv3 and DCSS driver are two totally separate DRM drivers. Having
one of them live in the drivers/gpu/drm/imx toplevel directory and the
other one in the dcss/ subdirectory is confusing. Move the IPUv3 driver
into its own subdirectory to make the separation more clear.
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Link: https://lore.kernel.org/r/20221125112519.3849636-1-l.stach@pengutronix.de
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20221125112519.3849636-1-l.stach@pengutronix.de
|
