| Age | Commit message (Collapse) | Author |
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull MM updates from Andrew Morton:
"__vmalloc()/kvmalloc() and no-block support" (Uladzislau Rezki)
Rework the vmalloc() code to support non-blocking allocations
(GFP_ATOIC, GFP_NOWAIT)
"ksm: fix exec/fork inheritance" (xu xin)
Fix a rare case where the KSM MMF_VM_MERGE_ANY prctl state is not
inherited across fork/exec
"mm/zswap: misc cleanup of code and documentations" (SeongJae Park)
Some light maintenance work on the zswap code
"mm/page_owner: add debugfs files 'show_handles' and 'show_stacks_handles'" (Mauricio Faria de Oliveira)
Enhance the /sys/kernel/debug/page_owner debug feature by adding
unique identifiers to differentiate the various stack traces so
that userspace monitoring tools can better match stack traces over
time
"mm/page_alloc: pcp->batch cleanups" (Joshua Hahn)
Minor alterations to the page allocator's per-cpu-pages feature
"Improve UFFDIO_MOVE scalability by removing anon_vma lock" (Lokesh Gidra)
Address a scalability issue in userfaultfd's UFFDIO_MOVE operation
"kasan: cleanups for kasan_enabled() checks" (Sabyrzhan Tasbolatov)
"drivers/base/node: fold node register and unregister functions" (Donet Tom)
Clean up the NUMA node handling code a little
"mm: some optimizations for prot numa" (Kefeng Wang)
Cleanups and small optimizations to the NUMA allocation hinting
code
"mm/page_alloc: Batch callers of free_pcppages_bulk" (Joshua Hahn)
Address long lock hold times at boot on large machines. These were
causing (harmless) softlockup warnings
"optimize the logic for handling dirty file folios during reclaim" (Baolin Wang)
Remove some now-unnecessary work from page reclaim
"mm/damon: allow DAMOS auto-tuned for per-memcg per-node memory usage" (SeongJae Park)
Enhance the DAMOS auto-tuning feature
"mm/damon: fixes for address alignment issues in DAMON_LRU_SORT and DAMON_RECLAIM" (Quanmin Yan)
Fix DAMON_LRU_SORT and DAMON_RECLAIM with certain userspace
configuration
"expand mmap_prepare functionality, port more users" (Lorenzo Stoakes)
Enhance the new(ish) file_operations.mmap_prepare() method and port
additional callsites from the old ->mmap() over to ->mmap_prepare()
"Fix stale IOTLB entries for kernel address space" (Lu Baolu)
Fix a bug (and possible security issue on non-x86) in the IOMMU
code. In some situations the IOMMU could be left hanging onto a
stale kernel pagetable entry
"mm/huge_memory: cleanup __split_unmapped_folio()" (Wei Yang)
Clean up and optimize the folio splitting code
"mm, swap: misc cleanup and bugfix" (Kairui Song)
Some cleanups and a minor fix in the swap discard code
"mm/damon: misc documentation fixups" (SeongJae Park)
"mm/damon: support pin-point targets removal" (SeongJae Park)
Permit userspace to remove a specific monitoring target in the
middle of the current targets list
"mm: MISC follow-up patches for linux/pgalloc.h" (Harry Yoo)
A couple of cleanups related to mm header file inclusion
"mm/swapfile.c: select swap devices of default priority round robin" (Baoquan He)
improve the selection of swap devices for NUMA machines
"mm: Convert memory block states (MEM_*) macros to enums" (Israel Batista)
Change the memory block labels from macros to enums so they will
appear in kernel debug info
"ksm: perform a range-walk to jump over holes in break_ksm" (Pedro Demarchi Gomes)
Address an inefficiency when KSM unmerges an address range
"mm/damon/tests: fix memory bugs in kunit tests" (SeongJae Park)
Fix leaks and unhandled malloc() failures in DAMON userspace unit
tests
"some cleanups for pageout()" (Baolin Wang)
Clean up a couple of minor things in the page scanner's
writeback-for-eviction code
"mm/hugetlb: refactor sysfs/sysctl interfaces" (Hui Zhu)
Move hugetlb's sysfs/sysctl handling code into a new file
"introduce VM_MAYBE_GUARD and make it sticky" (Lorenzo Stoakes)
Make the VMA guard regions available in /proc/pid/smaps and
improves the mergeability of guarded VMAs
"mm: perform guard region install/remove under VMA lock" (Lorenzo Stoakes)
Reduce mmap lock contention for callers performing VMA guard region
operations
"vma_start_write_killable" (Matthew Wilcox)
Start work on permitting applications to be killed when they are
waiting on a read_lock on the VMA lock
"mm/damon/tests: add more tests for online parameters commit" (SeongJae Park)
Add additional userspace testing of DAMON's "commit" feature
"mm/damon: misc cleanups" (SeongJae Park)
"make VM_SOFTDIRTY a sticky VMA flag" (Lorenzo Stoakes)
Address the possible loss of a VMA's VM_SOFTDIRTY flag when that
VMA is merged with another
"mm: support device-private THP" (Balbir Singh)
Introduce support for Transparent Huge Page (THP) migration in zone
device-private memory
"Optimize folio split in memory failure" (Zi Yan)
"mm/huge_memory: Define split_type and consolidate split support checks" (Wei Yang)
Some more cleanups in the folio splitting code
"mm: remove is_swap_[pte, pmd]() + non-swap entries, introduce leaf entries" (Lorenzo Stoakes)
Clean up our handling of pagetable leaf entries by introducing the
concept of 'software leaf entries', of type softleaf_t
"reparent the THP split queue" (Muchun Song)
Reparent the THP split queue to its parent memcg. This is in
preparation for addressing the long-standing "dying memcg" problem,
wherein dead memcg's linger for too long, consuming memory
resources
"unify PMD scan results and remove redundant cleanup" (Wei Yang)
A little cleanup in the hugepage collapse code
"zram: introduce writeback bio batching" (Sergey Senozhatsky)
Improve zram writeback efficiency by introducing batched bio
writeback support
"memcg: cleanup the memcg stats interfaces" (Shakeel Butt)
Clean up our handling of the interrupt safety of some memcg stats
"make vmalloc gfp flags usage more apparent" (Vishal Moola)
Clean up vmalloc's handling of incoming GFP flags
"mm: Add soft-dirty and uffd-wp support for RISC-V" (Chunyan Zhang)
Teach soft dirty and userfaultfd write protect tracking to use
RISC-V's Svrsw60t59b extension
"mm: swap: small fixes and comment cleanups" (Youngjun Park)
Fix a small bug and clean up some of the swap code
"initial work on making VMA flags a bitmap" (Lorenzo Stoakes)
Start work on converting the vma struct's flags to a bitmap, so we
stop running out of them, especially on 32-bit
"mm/swapfile: fix and cleanup swap list iterations" (Youngjun Park)
Address a possible bug in the swap discard code and clean things
up a little
[ This merge also reverts commit ebb9aeb980e5 ("vfio/nvgrace-gpu:
register device memory for poison handling") because it looks
broken to me, I've asked for clarification - Linus ]
* tag 'mm-stable-2025-12-03-21-26' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (321 commits)
mm: fix vma_start_write_killable() signal handling
mm/swapfile: use plist_for_each_entry in __folio_throttle_swaprate
mm/swapfile: fix list iteration when next node is removed during discard
fs/proc/task_mmu.c: fix make_uffd_wp_huge_pte() huge pte handling
mm/kfence: add reboot notifier to disable KFENCE on shutdown
memcg: remove inc/dec_lruvec_kmem_state helpers
selftests/mm/uffd: initialize char variable to Null
mm: fix DEBUG_RODATA_TEST indentation in Kconfig
mm: introduce VMA flags bitmap type
tools/testing/vma: eliminate dependency on vma->__vm_flags
mm: simplify and rename mm flags function for clarity
mm: declare VMA flags by bit
zram: fix a spelling mistake
mm/page_alloc: optimize lowmem_reserve max lookup using its semantic monotonicity
mm/vmscan: skip increasing kswapd_failures when reclaim was boosted
pagemap: update BUDDY flag documentation
mm: swap: remove scan_swap_map_slots() references from comments
mm: swap: change swap_alloc_slow() to void
mm, swap: remove redundant comment for read_swap_cache_async
mm, swap: use SWP_SOLIDSTATE to determine if swap is rotational
...
|
|
Pull drm updates from Dave Airlie:
"There was a rather late merge of a new color pipeline feature, that
some userspace projects are blocked on, and has seen a lot of work in
amdgpu. This should have seen some time in -next. There is additional
support for this for Intel, that if it arrives in the next day or two
I'll pass it on in another pull request and you can decide if you want
to take it.
Highlights:
- Arm Ethos NPU accelerator driver
- new DRM color pipeline support
- amdgpu will now run discrete SI/CIK cards instead of radeon, which
enables vulkan support in userspace
- msm gets gen8 gpu support
- initial Xe3P support in xe
Full detail summary:
New driver:
- Arm Ethos-U65/U85 accel driver
Core:
- support the drm color pipeline in vkms/amdgfx
- add support for drm colorop pipeline
- add COLOR PIPELINE plane property
- add DRM_CLIENT_CAP_PLANE_COLOR_PIPELINE
- throttle dirty worker with vblank
- use drm_for_each_bridge_in_chain_scoped in drm's bridge code
- Ensure drm_client_modeset tests are enabled in UML
- add simulated vblank interrupt - use in drivers
- dumb buffer sizing helper
- move freeing of drm client memory to driver
- crtc sharpness strength property
- stop using system_wq in scheduler/drivers
- support emergency restore in drm-client
Rust:
- make slice::as_flattened usable on all supported rustc
- add FromBytes::from_bytes_prefix() method
- remove redundant device ptr from Rust GEM object
- Change how AlwaysRefCounted is implemented for GEM objects
gpuvm:
- Add deferred vm_bo cleanup to GPUVM (for rust)
atomic:
- cleanup and improve state handling interfaces
buddy:
- optimize block management
dma-buf:
- heaps: Create heap per CMA reserved location
- improve userspace documentation
dp:
- add POST_LT_ADJ_REQ training sequence
- DPCD dSC quirk for synaptics panamera devices
- helpers to query branch DSC max throughput
ttm:
- Rename ttm_bo_put to ttm_bo_fini
- allow page protection flags on risc-v
- rework pipelined eviction fence handling
amdgpu:
- enable amdgpu by default for SI/CI dGPUs
- enable DC by default on SI
- refactor CIK/SI enablement
- add ABM KMS property
- Re-enable DM idle optimizations
- DC Analog encoders support
- Powerplay fixes for fiji/iceland
- Enable DC on bonaire by default
- HMM cleanup
- Add new RAS framework
- DML2.1 updates
- YCbCr420 fixes
- DC FP fixes
- DMUB fixes
- LTTPR fixes
- DTBCLK fixes
- DMU cursor offload handling
- Userq validation improvements
- Unify shutdown callback handling
- Suspend improvements
- Power limit code cleanup
- SR-IOV fixes
- AUX backlight fixes
- DCN 3.5 fixes
- HDMI compliance fixes
- DCN 4.0.1 cursor updates
- DCN interrupt fix
- DC KMS full update improvements
- Add additional HDCP traces
- DCN 3.2 fixes
- DP MST fixes
- Add support for new SR-IOV mailbox interface
- UQ reset support
- HDP flush rework
- VCE1 support
amdkfd:
- HMM cleanups
- Relax checks on save area overallocations
- Fix GPU mappings after prefetch
radeon:
- refactor CIK/SI enablement
xe:
- Initial Xe3P support
- panic support on VRAM for display
- fix stolen size check
- Loosen used tracking restriction
- New SR-IOV debugfs structure and debugfs updates
- Hide the GPU madvise flag behind a VM_BIND flag
- Always expose VRAM provisioning data on discrete GPUs
- Allow VRAM mappings for userptr when used with SVM
- Allow pinning of p2p dma-buf
- Use per-tile debugfs where appropriate
- Add documentation for Execution Queues
- PF improvements
- VF migration recovery redesign work
- User / Kernel VRAM partitioning
- Update Tile-based messages
- Allow configfs to disable specific GT types
- VF provisioning and migration improvements
- use SVM range helpers in PT layer
- Initial CRI support
- access VF registers using dedicated MMIO view
- limit number of jobs per exec queue
- add sriov_admin sysfs tree
- more crescent island specific support
- debugfs residency counter
- SRIOV migration work
- runtime registers for GFX 35
i915:
- add initial Xe3p_LPD display version 35 support
- Enable LNL+ content adaptive sharpness filter
- Use optimized VRR guardband
- Enable Xe3p LT PHY
- enable FBC support for Xe3p_LPD display
- add display 30.02 firmware support
- refactor SKL+ watermark latency setup
- refactor fbdev handling
- call i915/xe runtime PM via function pointers
- refactor i915/xe stolen memory/display interfaces
- use display version instead of gfx version in display code
- extend i915_display_info with Type-C port details
- lots of display cleanups/refactorings
- set O_LARGEFILE in __create_shmem
- skuip guc communication warning on reset
- fix time conversions
- defeature DRRS on LNL+
- refactor intel_frontbuffer split between i915/xe/display
- convert inteL_rom interfaces to struct drm_device
- unify display register polling interfaces
- aovid lock inversion when pinning to GGTT on CHV/BXT+VTD
panel:
- Add KD116N3730A08/A12, chromebook mt8189
- JT101TM023, LQ079L1SX01,
- GLD070WX3-SL01 MIPI DSI
- Samsung LTL106AL0, Samsung LTL106AL01
- Raystar RFF500F-AWH-DNN
- Winstar WF70A8SYJHLNGA
- Wanchanglong w552946aaa
- Samsung SOFEF00
- Lenovo X13s panel
- ilitek-ili9881c - add rpi 5" support
- visionx-rm69299 - add backlight support
- edp - support AUI B116XAN02.0
bridge:
- improve ref counting
- ti-sn65dsi86 - add support for DP mode with HPD
- synopsis: support CEC, init timer with correct freq
- ASL CS5263 DP-to-HDMI bridge support
nova-core:
- introduce bitfield! macro
- introduce safe integer converters
- GSP inits to fully booted state on Ampere
- Use more future-proof register for GPU identification
nova-drm:
- select NOVA_CORE
- 64-bit only
nouveau:
- improve reclocking on tegra 186+
- add large page and compression support
msm:
- GPU:
- Gen8 support: A840 (Kaanapali) and X2-85 (Glymur)
- A612 support
- MDSS:
- Added support for Glymur and QCS8300 platforms
- DPU:
- Enabled Quad-Pipe support, unlocking higher resolutions support
- Added support for Glymur platform
- Documented DPU on QCS8300 platform as supported
- DisplayPort:
- Added support for Glymur platform
- Added support lame remapping inside DP block
- Documented DisplayPort controller on QCS8300 and SM6150/QCS615
as supported
tegra:
- NVJPG driver
panfrost:
- display JM contexts over debugfs
- export JM contexts to userspace
- improve error and job handling
panthor:
- support custom ASN_HASH for mt8196
- support mali-G1 GPU
- flush shmem write before mapping buffers uncached
- make timeout per-queue instead of per-job
mediatek:
- MT8195/88 HDMIv2/DDCv2 support
rockchip:
- dsi: add support for RK3368
amdxdna:
- enhance runtime PM
- last hardware error reading uapi
- support firmware debug output
- add resource and telemetry data uapi
- preemption support
imx:
- add driver for HDMI TX Parallel audio interface
ivpu:
- add support for user-managed preemption buffer
- add userptr support
- update JSM firware API to 3.33.0
- add better alloc/free warnings
- fix page fault in unbind all bos
- rework bind/unbind of imported buffers
- enable MCA ECC signalling
- split fw runtime and global memory buffers
- add fdinfo memory statistics
tidss:
- convert to drm logging
- logging cleanup
ast:
- refactor generation init paths
- add per chip generation detect_tx_chip
- set quirks for each chip model
atmel-hlcdc:
- set LCDC_ATTRE register in plane disable
- set correct values for plane scaler
solomon:
- use drm helper for get_modes and move_valid
sitronix:
- fix output position when clearing screens
qaic:
- support dma-buf exports
- support new firmware's READ_DATA implementation
- sahara AIC200 image table update
- add sysfs support
- add coredump support
- add uevents support
- PM support
sun4i:
- layer refactors to decouple plane from output
- improve DE33 support
vc4:
- switch to generic CEC helpers
komeda:
- use drm_ logging functions
vkms:
- configfs support for display configuration
vgem:
- fix fence timer deadlock
etnaviv:
- add HWDB entry for GC8000 Nano Ultra VIP r6205"
* tag 'drm-next-2025-12-03' of https://gitlab.freedesktop.org/drm/kernel: (1869 commits)
Revert "drm/amd: Skip power ungate during suspend for VPE"
drm/amdgpu: use common defines for HUB faults
drm/amdgpu/gmc12: add amdgpu_vm_handle_fault() handling
drm/amdgpu/gmc11: add amdgpu_vm_handle_fault() handling
drm/amdgpu: use static ids for ACP platform devs
drm/amdgpu/sdma6: Update SDMA 6.0.3 FW version to include UMQ protected-fence fix
drm/amdgpu: Forward VMID reservation errors
drm/amdgpu/gmc8: Delegate VM faults to soft IRQ handler ring
drm/amdgpu/gmc7: Delegate VM faults to soft IRQ handler ring
drm/amdgpu/gmc6: Delegate VM faults to soft IRQ handler ring
drm/amdgpu/gmc6: Cache VM fault info
drm/amdgpu/gmc6: Don't print MC client as it's unknown
drm/amdgpu/cz_ih: Enable soft IRQ handler ring
drm/amdgpu/tonga_ih: Enable soft IRQ handler ring
drm/amdgpu/iceland_ih: Enable soft IRQ handler ring
drm/amdgpu/cik_ih: Enable soft IRQ handler ring
drm/amdgpu/si_ih: Enable soft IRQ handler ring
drm/amd/display: fix typo in display_mode_core_structs.h
drm/amd/display: fix Smart Power OLED not working after S4
drm/amd/display: Move RGB-type check for audio sync to DCE HW sequence
...
|
|
https://gitlab.freedesktop.org/drm/misc/kernel into drm-next
drm-misc-next-fixes for v6.19:
- Restrict the pointer size of flush pages to prevent a regression.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patch.msgid.link/0090a4fc-9cc4-4c03-bfe5-d1b1f0cc7e05@linux.intel.com
|
|
Enable MIGRATE_VMA_SELECT_COMPOUND support in nouveau driver to take
advantage of THP zone device migration capabilities.
Update migration and eviction code paths to handle compound page sizes
appropriately, improving memory bandwidth utilization and reducing
migration overhead for large GPU memory allocations.
[balbirs@nvidia.com: fix sparse error]
Link: https://lkml.kernel.org/r/20251115003333.3516870-1-balbirs@nvidia.com
Link: https://lkml.kernel.org/r/20251001065707.920170-17-balbirs@nvidia.com
Signed-off-by: Balbir Singh <balbirs@nvidia.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Zi Yan <ziy@nvidia.com>
Cc: Joshua Hahn <joshua.hahnjy@gmail.com>
Cc: Rakie Kim <rakie.kim@sk.com>
Cc: Byungchul Park <byungchul@sk.com>
Cc: Gregory Price <gourry@gourry.net>
Cc: Ying Huang <ying.huang@linux.alibaba.com>
Cc: Alistair Popple <apopple@nvidia.com>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: Baolin Wang <baolin.wang@linux.alibaba.com>
Cc: "Liam R. Howlett" <Liam.Howlett@oracle.com>
Cc: Nico Pache <npache@redhat.com>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Cc: Dev Jain <dev.jain@arm.com>
Cc: Barry Song <baohua@kernel.org>
Cc: Lyude Paul <lyude@redhat.com>
Cc: Danilo Krummrich <dakr@kernel.org>
Cc: David Airlie <airlied@gmail.com>
Cc: Simona Vetter <simona@ffwll.ch>
Cc: Ralph Campbell <rcampbell@nvidia.com>
Cc: Mika Penttilä <mpenttil@redhat.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: Francois Dugast <francois.dugast@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Change page_free to folio_free to make the folio support for
zone device-private more consistent. The PCI P2PDMA callback
has also been updated and changed to folio_free() as a result.
For drivers that do not support folios (yet), the folio is
converted back into page via &folio->page and the page is used
as is, in the current callback implementation.
Link: https://lkml.kernel.org/r/20251001065707.920170-3-balbirs@nvidia.com
Signed-off-by: Balbir Singh <balbirs@nvidia.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Zi Yan <ziy@nvidia.com>
Cc: Joshua Hahn <joshua.hahnjy@gmail.com>
Cc: Rakie Kim <rakie.kim@sk.com>
Cc: Byungchul Park <byungchul@sk.com>
Cc: Gregory Price <gourry@gourry.net>
Cc: Ying Huang <ying.huang@linux.alibaba.com>
Cc: Alistair Popple <apopple@nvidia.com>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: Baolin Wang <baolin.wang@linux.alibaba.com>
Cc: "Liam R. Howlett" <Liam.Howlett@oracle.com>
Cc: Nico Pache <npache@redhat.com>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Cc: Dev Jain <dev.jain@arm.com>
Cc: Barry Song <baohua@kernel.org>
Cc: Lyude Paul <lyude@redhat.com>
Cc: Danilo Krummrich <dakr@kernel.org>
Cc: David Airlie <airlied@gmail.com>
Cc: Simona Vetter <simona@ffwll.ch>
Cc: Ralph Campbell <rcampbell@nvidia.com>
Cc: Mika Penttilä <mpenttil@redhat.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: Francois Dugast <francois.dugast@intel.com>
Cc: Madhavan Srinivasan <maddy@linux.ibm.com>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: Felix Kuehling <Felix.Kuehling@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: "Christian König" <christian.koenig@amd.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Patch series "mm: support device-private THP", v7.
This patch series introduces support for Transparent Huge Page (THP)
migration in zone device-private memory. The implementation enables
efficient migration of large folios between system memory and
device-private memory
Background
Current zone device-private memory implementation only supports PAGE_SIZE
granularity, leading to:
- Increased TLB pressure
- Inefficient migration between CPU and device memory
This series extends the existing zone device-private infrastructure to
support THP, leading to:
- Reduced page table overhead
- Improved memory bandwidth utilization
- Seamless fallback to base pages when needed
In my local testing (using lib/test_hmm) and a throughput test, the series
shows a 350% improvement in data transfer throughput and a 80% improvement
in latency
These patches build on the earlier posts by Ralph Campbell [1]
Two new flags are added in vma_migration to select and mark compound
pages. migrate_vma_setup(), migrate_vma_pages() and
migrate_vma_finalize() support migration of these pages when
MIGRATE_VMA_SELECT_COMPOUND is passed in as arguments.
The series also adds zone device awareness to (m)THP pages along with
fault handling of large zone device private pages. page vma walk and the
rmap code is also zone device aware. Support has also been added for
folios that might need to be split in the middle of migration (when the
src and dst do not agree on MIGRATE_PFN_COMPOUND), that occurs when src
side of the migration can migrate large pages, but the destination has not
been able to allocate large pages. The code supported and used
folio_split() when migrating THP pages, this is used when
MIGRATE_VMA_SELECT_COMPOUND is not passed as an argument to
migrate_vma_setup().
The test infrastructure lib/test_hmm.c has been enhanced to support THP
migration. A new ioctl to emulate failure of large page allocations has
been added to test the folio split code path. hmm-tests.c has new test
cases for huge page migration and to test the folio split path. A new
throughput test has been added as well.
The nouveau dmem code has been enhanced to use the new THP migration
capability.
mTHP support:
The patches hard code, HPAGE_PMD_NR in a few places, but the code has been
kept generic to support various order sizes. With additional refactoring
of the code support of different order sizes should be possible.
The future plan is to post enhancements to support mTHP with a rough
design as follows:
1. Add the notion of allowable thp orders to the HMM based test driver
2. For non PMD based THP paths in migrate_device.c, check to see if
a suitable order is found and supported by the driver
3. Iterate across orders to check the highest supported order for migration
4. Migrate and finalize
The mTHP patches can be built on top of this series, the key design
elements that need to be worked out are infrastructure and driver support
for multiple ordered pages and their migration.
HMM support for large folios was added in 10b9feee2d0d ("mm/hmm:
populate PFNs from PMD swap entry").
This patch (of 16)
Add routines to support allocation of large order zone device folios and
helper functions for zone device folios, to check if a folio is device
private and helpers for setting zone device data.
When large folios are used, the existing page_free() callback in pgmap is
called when the folio is freed, this is true for both PAGE_SIZE and higher
order pages.
Zone device private large folios do not support deferred split and scan
like normal THP folios.
Link: https://lkml.kernel.org/r/20251001065707.920170-1-balbirs@nvidia.com
Link: https://lkml.kernel.org/r/20251001065707.920170-2-balbirs@nvidia.com
Link: https://lore.kernel.org/linux-mm/20201106005147.20113-1-rcampbell@nvidia.com/ [1]
Signed-off-by: Balbir Singh <balbirs@nvidia.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Zi Yan <ziy@nvidia.com>
Cc: Joshua Hahn <joshua.hahnjy@gmail.com>
Cc: Rakie Kim <rakie.kim@sk.com>
Cc: Byungchul Park <byungchul@sk.com>
Cc: Gregory Price <gourry@gourry.net>
Cc: Ying Huang <ying.huang@linux.alibaba.com>
Cc: Alistair Popple <apopple@nvidia.com>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: Baolin Wang <baolin.wang@linux.alibaba.com>
Cc: "Liam R. Howlett" <Liam.Howlett@oracle.com>
Cc: Nico Pache <npache@redhat.com>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Cc: Dev Jain <dev.jain@arm.com>
Cc: Barry Song <baohua@kernel.org>
Cc: Lyude Paul <lyude@redhat.com>
Cc: Danilo Krummrich <dakr@kernel.org>
Cc: David Airlie <airlied@gmail.com>
Cc: Simona Vetter <simona@ffwll.ch>
Cc: Ralph Campbell <rcampbell@nvidia.com>
Cc: Mika Penttilä <mpenttil@redhat.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: Francois Dugast <francois.dugast@intel.com>
Cc: Madhavan Srinivasan <maddy@linux.ibm.com>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: Felix Kuehling <Felix.Kuehling@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: "Christian König" <christian.koenig@amd.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Ensure that the DMA address of the framebuffer flush page is not larger
than its hardware register.
On GPUs older than Hopper, the register for the address can hold up to a
40-bit address (right-shifted by 8 so that it fits in the 32-bit
register), and on Hopper and later it can be 52 bits (64-bit register
where bits 52-63 must be zero).
Recently it was discovered that under certain conditions, the flush page
could be allocated outside this range. Although this bug was fixed, we
can ensure that any future changes to this code don't accidentally
generate an invalid page address.
Signed-off-by: Timur Tabi <ttabi@nvidia.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Lyude Paul <lyude@redhat.com>
Link: https://patch.msgid.link/20251113230323.1271726-2-ttabi@nvidia.com
|
|
The flush page DMA address is stored in a special register that is not
associated with the GPU's standard DMA range. For example, on Turing,
the GPU's MMU can handle 47-bit addresses, but the flush page address
register is limited to 40 bits.
At the point during device initialization when the flush page is
allocated, the DMA mask is still at its default of 32 bits. So even
though it's unlikely that the flush page could exist above a 40-bit
address, the dma_map_page() call could fail, e.g. if IOMMU is disabled
and the address is above 32 bits. The simplest way to achieve all
constraints is to allocate the page in the DMA32 zone. Since the flush
page is literally just a page, this is an acceptable limitation. The
alternative is to temporarily set the DMA mask to 40 (or 52 for Hopper
and later) bits, but that could have unforseen side effects.
In situations where the flush page is allocated above 32 bits and IOMMU
is disabled, you will get an error like this:
nouveau 0000:65:00.0: DMA addr 0x0000000107c56000+4096 overflow (mask ffffffff, bus limit 0).
Fixes: 5728d064190e ("drm/nouveau/fb: handle sysmem flush page from common code")
Signed-off-by: Timur Tabi <ttabi@nvidia.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Lyude Paul <lyude@redhat.com>
Link: https://patch.msgid.link/20251113230323.1271726-1-ttabi@nvidia.com
|
|
Linux 6.18-rc6
Backmerge in order to merge msm next
Signed-off-by: Dave Airlie <airlied@redhat.com>
|
|
Backmerging to get fixes from v6.18-rc6.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
|
|
nvkm_falcon_fw::boot is allocated, but no one frees it. This causes a
kmemleak warning.
Make sure this data is deallocated.
Fixes: 2541626cfb79 ("drm/nouveau/acr: use common falcon HS FW code for ACR FWs")
Signed-off-by: Nam Cao <namcao@linutronix.de>
Cc: stable@vger.kernel.org
Reviewed-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Lyude Paul <lyude@redhat.com>
Link: https://patch.msgid.link/20251117084231.2910561-1-namcao@linutronix.de
|
|
Add the missing fields of the nvfw_hs_load_header_v2 struct, so that the
struct matches the actual contents of the firmware images.
nvfw_hs_load_header_v2 is a struct that defines a header for some firmware
images used by Nouveau. The current structure definition is incomplete;
it omits the last two fields because they are unused.
To maintain consistency between Nouveau, OpenRM, and Nova, and to
make it easier to support possible future images, we should fully define
the struct. Also add a __counted_by tag for the flex array.
Signed-off-by: Timur Tabi <ttabi@nvidia.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Lyude Paul <lyude@redhat.com>
Link: https://patch.msgid.link/20251010223957.1078525-1-ttabi@nvidia.com
|
|
The HW can only do compression on large and huge pages, and enabling it on
4K pages leads to a MMU fault. Compression also needs kernel support for
handling the compressed kinds and managing the compression tags.
This increments the nouveau version number which allows NVK to enable it
only when the kernel actually supports both features and avoid breaking
the system if a newer mesa version is paired with an older kernel version.
For the associated userspace MR, please see !36450:
https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/36450
Signed-off-by: Mohamed Ahmed <mohamedahmedegypt2001@gmail.com>
Signed-off-by: Mary Guillemard <mary@mary.zone>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: James Jones <jajones@nvidia.com>
Signed-off-by: Lyude Paul <lyude@redhat.com>
Link: https://patch.msgid.link/20251110-nouveau-compv6-v6-5-83b05475f57c@mary.zone
|
|
Allow compressed PTE kinds to be written into PTEs when GSP-RM is
present, rather than reverting to their non-compressed versions.
Signed-off-by: Ben Skeggs <bskeggs@nvidia.com>
Signed-off-by: Mohamed Ahmed <mohamedahmedegypt2001@gmail.com>
Signed-off-by: Mary Guillemard <mary@mary.zone>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: James Jones <jajones@nvidia.com>
Signed-off-by: Lyude Paul <lyude@redhat.com>
Link: https://patch.msgid.link/20251110-nouveau-compv6-v6-4-83b05475f57c@mary.zone
|
|
From GP100 onwards it's not possible to initialise comptag RAM without
PMU firmware, which nouveau has no support for.
As such, this code is essentially a no-op and will always revert to the
equivalent non-compressed kind due to comptag allocation failure. It's
also broken for the needs of VM_BIND/Vulkan.
Remove the code entirely to make way for supporting compression on GPUs
that support GSM-RM.
Signed-off-by: Ben Skeggs <bskeggs@nvidia.com>
Signed-off-by: Mohamed Ahmed <mohamedahmedegypt2001@gmail.com>
Signed-off-by: Mary Guillemard <mary@mary.zone>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: James Jones <jajones@nvidia.com>
Signed-off-by: Lyude Paul <lyude@redhat.com>
Link: https://patch.msgid.link/20251110-nouveau-compv6-v6-3-83b05475f57c@mary.zone
|
|
Now that everything in UVMM knows about the variable page shift, we can
select larger values.
The proposed approach relies on nouveau_bo::page unless if it would cause
alignment issues (in which case we fall back to searching for an
appropriate shift)
Signed-off-by: Mary Guillemard <mary@mary.zone>
Co-developed-by: Mohamed Ahmed <mohamedahmedegypt2001@gmail.com>
Signed-off-by: Mohamed Ahmed <mohamedahmedegypt2001@gmail.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: James Jones <jajones@nvidia.com>
Signed-off-by: Lyude Paul <lyude@redhat.com>
Link: https://patch.msgid.link/20251110-nouveau-compv6-v6-2-83b05475f57c@mary.zone
|
|
Currently memory allocated by VM_BIND uAPI can only have a granuality
matching PAGE_SIZE (4KiB in common case)
To have a better memory management and to allow big (64KiB) and huge
(2MiB) pages later in the series, we are now passing the page shift all
around the internals of UVMM.
Signed-off-by: Mary Guillemard <mary@mary.zone>
Co-developed-by: Mohamed Ahmed <mohamedahmedegypt2001@gmail.com>
Signed-off-by: Mohamed Ahmed <mohamedahmedegypt2001@gmail.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: James Jones <jajones@nvidia.com>
Signed-off-by: Lyude Paul <lyude@redhat.com>
Link: https://patch.msgid.link/20251110-nouveau-compv6-v6-1-83b05475f57c@mary.zone
|
|
This reverts commit ebe755605082eddff80eafe0c50915b1366ee98f.
Tested the latest kernel on my GB203 and this seems to break it somehow.
Nov 09 04:16:14 bighp kernel: nouveau 0000:02:00.0: gsp: GSP-FMC boot failed (mbox: 0x0000000b)
Nov 09 04:16:14 bighp kernel: nouveau 0000:02:00.0: gsp: init failed, -5
Nov 09 04:16:14 bighp kernel: nouveau 0000:02:00.0: init failed with -5
Nov 09 04:16:14 bighp kernel: nouveau: drm:00000000:00000080: init failed with -5
Nov 09 04:16:14 bighp kernel: nouveau 0000:02:00.0: drm: Device allocation failed: -5
Nov 09 04:16:14 bighp kernel: nouveau 0000:02:00.0: probe with driver nouveau failed with error -5
Not sure why, I went over the patch and thought it should have worked, but there must be some
32-bit problem maybe in the FMC boot path.
Signed-off-by: Dave Airlie <airlied@redhat.com>
|
|
8 and 16 bit formats use a different layout on
GB20x than they did on prior chips. Add the
corresponding DRM format modifiers to the list of
modifiers supported by the display engine on such
chips, and filter the supported modifiers for each
format based on its bytes per pixel in
nv50_plane_format_mod_supported().
Note this logic will need to be updated when GB10
support is added, since it is a GB20x chip that
uses the pre-GB20x sector layout for all formats.
Fixes: 6cc6e08d4542 ("drm/nouveau/kms: add support for GB20x")
Signed-off-by: James Jones <jajones@nvidia.com>
Reviewed-by: Faith Ekstrand <faith.ekstrand@collabora.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Cc: stable@vger.kernel.org
Link: https://patch.msgid.link/20251030181153.1208-3-jajones@nvidia.com
|
|
Set the DMA mask before calling nvkm_device_ctor(), so that when the
flush page is created in nvkm_fb_ctor(), the allocation will not fail
if the page is outside of DMA address space, which can easily happen if
IOMMU is disable. In such situations, you will get an error like this:
nouveau 0000:65:00.0: DMA addr 0x0000000107c56000+4096 overflow (mask ffffffff, bus limit 0).
Commit 38f5359354d4 ("rm/nouveau/pci: set streaming DMA mask early")
set the mask after calling nvkm_device_ctor(), but back then there was
no flush page being created, which might explain why the mask wasn't
set earlier.
Flush page allocation was added in commit 5728d064190e ("drm/nouveau/fb:
handle sysmem flush page from common code"). nvkm_fb_ctor() calls
alloc_page(), which can allocate a page anywhere in system memory, but
then calls dma_map_page() on that page. But since the DMA mask is still
set to 32, the map can fail if the page is allocated above 4GB. This is
easy to reproduce on systems with a lot of memory and IOMMU disabled.
An alternative approach would be to force the allocation of the flush
page to low memory, by specifying __GFP_DMA32. However, this would
always allocate the page in low memory, even though the hardware can
access high memory.
Signed-off-by: Timur Tabi <ttabi@nvidia.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Link: https://patch.msgid.link/20251014174512.3172102-1-ttabi@nvidia.com
|
|
Multiple consecutive boolean function arguments are usually not very
readable.
Replace the ones in ttm_device_init() with flags with the additional
benefit of soon being able to pass in more data with just a one off
code base churning cost.
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@igalia.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Christian König <christian.koenig@amd.com>
Cc: Danilo Krummrich <dakr@kernel.org>
Cc: Dave Airlie <airlied@redhat.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Cc: Lyude Paul <lyude@redhat.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Maxime Ripard <mripard@kernel.org>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Sui Jingfeng <suijingfeng@loongson.cn>
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Zack Rusin <zack.rusin@broadcom.com>
Acked-by: Christian König <christian.koenig@amd.com>
Acked-by: Zack Rusin <zack.rusin@broadcom.com>
Acked-by: Thomas Hellström <thomas.hellstrom@linux.intel.com> # For xe
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Tvrtko Ursulin <tursulin@ursulin.net>
Link: https://lore.kernel.org/r/20251020115411.36818-4-tvrtko.ursulin@igalia.com
[tursulin: fixup checkpatch while applying]
|
|
There are a gazillion files that depend on drm_print.h being indirectly
included via drm_buddy.h, drm_mm.h, or ttm/ttm_resource.h. In
preparation for removing those includes, explicitly include drm_print.h
where needed.
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://lore.kernel.org/r/5fe67395907be33eb5199ea6d540e29fddee71c8.1761734313.git.jani.nikula@intel.com
|
|
nouveau_sched_fini() uses a memory barrier before wait_event().
wait_event(), however, is a macro which expands to a loop which might
check the passed condition several times. The barrier would only take
effect for the first check.
Replace the barrier with a function which takes the spinlock.
Cc: stable@vger.kernel.org # v6.8+
Fixes: 5f03a507b29e ("drm/nouveau: implement 1:1 scheduler - entity relationship")
Acked-by: Danilo Krummrich <dakr@kernel.org>
Signed-off-by: Philipp Stanner <phasta@kernel.org>
Link: https://patch.msgid.link/20251024161221.196155-2-phasta@kernel.org
|
|
No caller of the client resume/suspend helpers holds the console
lock. The last such cases were removed from radeon in the patch
series at [1]. Now remove the related parameter and the TODO items.
v2:
- update placeholders for CONFIG_DRM_CLIENT=n
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/series/151624/ # [1]
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Acked-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Petr Vorel <pvorel@suse.cz>
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Acked-by: Danilo Krummrich <dakr@kernel.org>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com>
Link: https://lore.kernel.org/r/20251001143709.419736-1-tzimmermann@suse.de
|
|
Updating drm-misc-next to the state of v6.18-rc1.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
|
|
Pull drm fixes from Dave Airlie:
"Some fixes leftover from our fixes branch, just nouveau and vmwgfx:
nouveau:
- Return errno code from TTM move helper
vmwgfx:
- Fix null-ptr access in cursor code
- Fix UAF in validation
- Use correct iterator in validation"
* tag 'drm-fixes-2025-10-11' of https://gitlab.freedesktop.org/drm/kernel:
drm/nouveau: fix bad ret code in nouveau_bo_move_prep
drm/vmwgfx: Fix copy-paste typo in validation
drm/vmwgfx: Fix Use-after-free in validation
drm/vmwgfx: Fix a null-ptr access in the cursor snooper
|
|
In `nouveau_bo_move_prep`, if `nouveau_mem_map` fails, an error code
should be returned. Currently, it returns zero even if vmm addr is not
correctly mapped.
Cc: stable@vger.kernel.org
Reviewed-by: Petr Vorel <pvorel@suse.cz>
Signed-off-by: Shuhao Fu <sfual@cse.ust.hk>
Fixes: 9ce523cc3bf2 ("drm/nouveau: separate buffer object backing memory from nvkm structures")
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
|
|
Call drm_mode_size_dumb() to compute dumb-buffer scanline pitch and
buffer size. Align the pitch to a multiple of 256.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Cc: Karol Herbst <kherbst@redhat.com>
Cc: Lyude Paul <lyude@redhat.com>
Cc: Danilo Krummrich <dakr@kernel.org>
Link: https://lore.kernel.org/r/20250821081918.79786-15-tzimmermann@suse.de
|
|
Give TTM BOs a separate cleanup function.
No funktional change, but the next step in removing the TTM BO reference
counting and replacing it with the GEM object reference counting.
v2: move the code around a bit to make it clearer what's happening
v3: fix nouveau_bo_fini as well
Signed-off-by: Christian König <christian.koenig@amd.com>
Acked-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Acked-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://lore.kernel.org/r/20250909144311.1927-1-christian.koenig@amd.com
|
|
Using pmu counters for usage stats. This enables dynamic frequency
scaling on all of the currently supported Tegra gpus.
The register offsets are valid for gk20a, gm20b, gp10b, and gv11b. If
support is added for ga10b, this will need rearchitected.
Signed-off-by: Aaron Kling <webgeek1234@gmail.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
[fixed tab alignment in gk20a_devfreq_target()]
Signed-off-by: Lyude Paul <lyude@redhat.com>
Link: https://lore.kernel.org/r/20250906-gk20a-devfreq-v2-1-0217f53ee355@gmail.com
|
|
Starting with Tegra186, gpu clock handling is done by the bpmp and there
is little to be done by the kernel. The only thing necessary for
reclocking is to set the gpcclk to the desired rate and the bpmp handles
the rest. The pstate list is based on the downstream driver generates.
Signed-off-by: Aaron Kling <webgeek1234@gmail.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
[added newline before gp10b_clk macro declaration for checkpatch error]
Signed-off-by: Lyude Paul <lyude@redhat.com>
Link: https://lore.kernel.org/r/20250823-gp10b-reclock-v2-1-90a1974a54e3@gmail.com
|
|
This is a backmerge of Linux 6.17-rc6, needed for msm,
also requested by misc.
Signed-off-by: Dave Airlie <airlied@redhat.com>
|
|
Before exporting a buffer, make sure it has been populated with
pages at least once.
While discussing cgroups we noticed a problem where you could export
a BO to a dma-buf without having it ever being backed or accounted for.
This meant in low memory situations or eventually with cgroups, a
lower privledged process might cause the compositor to try and allocate
a lot of memory on it's behalf and this could fail. At least make
sure the exporter has managed to allocate the RAM at least once
before exporting the object.
This only applies currently to TTM_PL_SYSTEM objects, because
GTT objects get populated on first validate, and VRAM doesn't
use TT.
Acked-by: Danilo Krummrich <dakr@kernel.org>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Link: https://lore.kernel.org/r/20250904021643.2050497-3-airlied@gmail.com
|
|
This reverts:
commit bead88002227 ("drm/nouveau: Remove waitque for sched teardown")
commit 5f46f5c7af8c ("drm/nouveau: Add new callback for scheduler teardown")
from the drm/sched teardown leak fix series:
https://lore.kernel.org/dri-devel/20250710125412.128476-2-phasta@kernel.org/
The aforementioned series removed a blocking waitqueue from
nouveau_sched_fini(). It was mistakenly assumed that this waitqueue only
prevents jobs from leaking, which the series fixed.
The waitqueue, however, also guarantees that all VM_BIND related jobs
are finished in order, cleaning up mappings in the GPU's MMU. These jobs
must be executed sequentially. Without the waitqueue, this is no longer
guaranteed, because entity and scheduler teardown can race with each
other.
Revert all patches related to the waitqueue removal.
Fixes: bead88002227 ("drm/nouveau: Remove waitque for sched teardown")
Suggested-by: Danilo Krummrich <dakr@kernel.org>
Signed-off-by: Philipp Stanner <phasta@kernel.org>
Link: https://lore.kernel.org/r/20250901083107.10206-2-phasta@kernel.org
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
|
|
Replace redundant return value judgment with PTR_ERR_OR_ZERO() to
enhance code readability.
Signed-off-by: Liao Yuanhong <liaoyuanhong@vivo.com>
Signed-off-by: Lyude Paul <lyude@redhat.com>
Link: https://lore.kernel.org/r/20250815133643.418089-1-liaoyuanhong@vivo.com
|
|
This ensures that the memory write and the interrupt are properly
ordered and we won't wake up the kernel before the semaphore write has
hit memory.
Fixes: b1ca384772b6 ("drm/nouveau/gv100-: switch to volta semaphore methods")
Cc: stable@vger.kernel.org
Signed-off-by: Faith Ekstrand <faith.ekstrand@collabora.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Link: https://lore.kernel.org/r/20250829021633.1674524-2-airlied@gmail.com
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
|
|
Nouveau has code that when it gets an IRQ with no allowed handler
it disables it to avoid storms.
However with nonstall interrupts, we often disable them from
the drm driver, but still request their emission via the push submission.
Just don't disable nonstall irqs ever in normal operation, the
event handling code will filter them out, and the driver will
just enable/disable them at load time.
This fixes timeouts we've been seeing on/off for a long time,
but they became a lot more noticeable on Blackwell.
This doesn't fix all of them, there is a subsequent fence emission
fix to fix the last few.
Fixes: 3ebd64aa3c4f ("drm/nouveau/intr: support multiple trees, and explicit interfaces")
Cc: stable@vger.kernel.org
Signed-off-by: Dave Airlie <airlied@redhat.com>
Link: https://lore.kernel.org/r/20250829021633.1674524-1-airlied@gmail.com
[ Fix a typo and a minor checkpatch.pl warning; remove "v2" from commit
subject. - Danilo ]
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
|
|
The memory target check is a hold-over from a refactor. It's harmless
but distracting, so just remove it.
Fixes: 2541626cfb79 ("drm/nouveau/acr: use common falcon HS FW code for ACR FWs")
Signed-off-by: Timur Tabi <ttabi@nvidia.com>
Link: https://lore.kernel.org/r/20250813001004.2986092-3-ttabi@nvidia.com
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
|
|
The 'tag' parameter is passed by value and is not actually used after
being incremented, so remove the increment. It's the function that calls
gm200_flcn_pio_imem_wr that is supposed to (and does) increment 'tag'.
Fixes: 0e44c2170876 ("drm/nouveau/flcn: new code to load+boot simple HS FWs (VPR scrubber)")
Reviewed-by: Philipp Stanner <phasta@kernel.org>
Signed-off-by: Timur Tabi <ttabi@nvidia.com>
Link: https://lore.kernel.org/r/20250813001004.2986092-2-ttabi@nvidia.com
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
|
|
Function nvkm_gsp_fwsec_v2() sets 'ret' if the kmemdup() call fails, but
it never uses or returns 'ret' after that point. We always need to release
the firmware regardless, so do that and then check for error.
Fixes: 176fdcbddfd2 ("drm/nouveau/gsp/r535: add support for booting GSP-RM")
Cc: stable@vger.kernel.org # v6.7+
Signed-off-by: Timur Tabi <ttabi@nvidia.com>
Link: https://lore.kernel.org/r/20250813001004.2986092-1-ttabi@nvidia.com
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
|
|
On some chipsets, which block-linear modifiers are
supported is format-specific. However, linear
modifiers are always be supported. The prior
modifier filtering logic was not accounting for
the linear case.
Cc: stable@vger.kernel.org
Fixes: c586f30bf74c ("drm/nouveau/kms: Add format mod prop to base/ovly/nvdisp")
Signed-off-by: James Jones <jajones@nvidia.com>
Link: https://lore.kernel.org/r/20250811220017.1337-3-jajones@nvidia.com
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
|
|
Update drm-misc-fixes to -rc2.
Signed-off-by: Maxime Ripard <mripard@kernel.org>
|
|
Bring v6.17-rc2 in to unstuck for-linux-next.
Signed-off-by: Maxime Ripard <mripard@kernel.org>
|
|
We are about to pass more arguments to drm_gpuvm_sm_map[_ops_create](),
so, before we do that, let's pass arguments through a struct instead
of changing each call site every time a new optional argument is added.
Cc: Danilo Krummrich <dakr@kernel.org>
Cc: Brendan King <Brendan.King@imgtec.com>
Cc: Matt Coster <matt.coster@imgtec.com>
Cc: Boris Brezillon <bbrezillon@kernel.org>
Cc: Caterina Shablia <caterina.shablia@collabora.com>
Cc: Rob Clark <robin.clark@oss.qualcomm.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: <dri-devel@lists.freedesktop.org>
Co-developed-by: Himal Prasad Ghimiray <himal.prasad.ghimiray@intel.com>
Signed-off-by: Himal Prasad Ghimiray <himal.prasad.ghimiray@intel.com>
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Acked-by: Danilo Krummrich <dakr@kernel.org>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Rob Clark <robin.clark@oss.qualcomm.com>
Reviewed-by: Matt Coster <matt.coster@imgtec.com> # imagination/pvr_vm.c
Acked-by: Matt Coster <matt.coster@imgtec.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Link: https://lore.kernel.org/r/20250819162058.2777306-2-himal.prasad.ghimiray@intel.com
|
|
https://gitlab.freedesktop.org/drm/misc/kernel into drm-next
drm-misc-next for v6.18:
UAPI Changes:
- Add DRM_IOCTL_GEM_CHANGE_HANDLE for reassigning GEM handles
- Document DRM_MODE_PAGE_FLIP_EVENT
Cross-subsystem Changes:
fbcon:
- Add missing declarations in fbcon.h
Core Changes:
bridge:
- Fix ref counting
panel:
- Replace and remove mipi_dsi_generic_write_{seq/_chatty}()
sched:
- Fixes
Rust:
- Drop Opaque<> from ioctl arguments
Driver Changes:
amdxdma:
- Support buffers allocated by user space
- Streamline PM interfaces
- Fixes
bridge:
- cdns-dsi: Various improvements to mode setting
- Support Solomon SSD2825 plus DT bindings
- Support Waveshare DSI2DPI plus DT bindings
gud:
- Fixes
ivpu:
- Fixes
nouveau:
- Use GSP firmware by default
- Fixes
panel:
- panel-edp: Support mt8189 Chromebooks; Support BOE NV140WUM-N64;
Support SHP LQ134Z1; Fixes
- panel-simple: Support Olimex LCD-OLinuXino-5CTS plus DT bindings
- Support Samsung AMS561RA01
- Support Hydis HV101HD1 plus DT bindings
panthor:
- Print task/pid on errors
- Fixes
renesas:
- convert to RUNTIME_PM_OPS
repaper:
- Use shadow-plane helpers
rocket:
- Add driver for Rockchip NPU plus DT bindings
sharp-memory:
- Use shadow-plane helpers
simpledrm:
- Use of_reserved_mem_region_to_resource() helper
tidss:
- Use crtc_ fields for programming display mode
- Remove other drivers from aperture
v3d:
- Support querying nubmer of GPU resets for KHR_robustness
vmwgfx:
- Fixes
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://lore.kernel.org/r/20250814072454.GA18104@linux.fritz.box
|
|
Replace kfree() with kvfree() for memory allocated by kvmalloc().
Compile-tested only.
Cc: stable@vger.kernel.org
Fixes: 8a8b1ec5261f ("drm/nouveau/gsp: split rpc handling out on its own")
Signed-off-by: Qianfeng Rong <rongqianfeng@vivo.com>
Reviewed-by: Timur Tabi <ttabi@nvidia.com>
Acked-by: Zhi Wang <zhiw@nvidia.com>
Link: https://lore.kernel.org/r/20250813125412.96178-1-rongqianfeng@vivo.com
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
|
|
https://gitlab.freedesktop.org/drm/misc/kernel into drm-fixes
Short summary of fixes pull:
bridge:
- fix OF-node leak
- fix documentation
fbdev-emulation:
- pass correct format info to drm_helper_mode_fill_fb_struct()
panfrost:
- print correct RSS size
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://lore.kernel.org/r/20250812064712.GA14554@2a02-2454-fd5e-fd00-2c49-c639-c55f-a125.dyn6.pyur.net
|
|
This is inteded to address concerns that users might get cryptic error
messages or a failure to boot if they set nouveau.config=NvGspRm=0 on
the kernel command line and their gpu requires gsp (Ada or newer).
With this patch, that configuration results in error messages like this:
nouveau 0000:01:00.0: gsp: Failed to load required firmware for device.
nouveau 0000:01:00.0: gsp ctor failed: -22
nouveau 0000:01:00.0: probe with driver nouveau failed with error -22
When nouveau fails to load like this, we still fall back to the generic
framebuffer device, so users will still have limited graphical output.
Signed-off-by: Mel Henning <mhenning@darkrefraction.com>
Signed-off-by: Lyude Paul <lyude@redhat.com>
Link: https://lore.kernel.org/r/20250811213843.4294-4-mhenning@darkrefraction.com
|
|
This struct element is no longer used.
Signed-off-by: Mel Henning <mhenning@darkrefraction.com>
Reviewed-by: Ben Skeggs <bskeggs@nvidia.com>
Signed-off-by: Lyude Paul <lyude@redhat.com>
Link: https://lore.kernel.org/r/20250811213843.4294-3-mhenning@darkrefraction.com
|
|
This option was originally intoduced because the GSP code path was
not well tested and we wanted to leave it up to distros which code path
they shipped by default. By now though, the GSP path is probably better
tested than the old firmware eg. Fedora ships GSP by default and we
generally run CTS on GSP. We've always been GSP-only on Ada and later.
So, this path removes the option and effectively sets the option to
always on. We still fall back to the old firmware if GSP is not found.
This change only affects Turing and Ampere.
Users can still set nouveau.config=NvGspRm=0 on the kernel command line
to force using the old firmware on Turing/Ampere.
Signed-off-by: Mel Henning <mhenning@darkrefraction.com>
Reviewed-by: Ben Skeggs <bskeggs@nvidia.com>
Signed-off-by: Lyude Paul <lyude@redhat.com>
Link: https://lore.kernel.org/r/20250811213843.4294-2-mhenning@darkrefraction.com
|