| Age | Commit message (Collapse) | Author |
|---|
|
Pull drm updates from Dave Airlie:
"There was a rather late merge of a new color pipeline feature, that
some userspace projects are blocked on, and has seen a lot of work in
amdgpu. This should have seen some time in -next. There is additional
support for this for Intel, that if it arrives in the next day or two
I'll pass it on in another pull request and you can decide if you want
to take it.
Highlights:
- Arm Ethos NPU accelerator driver
- new DRM color pipeline support
- amdgpu will now run discrete SI/CIK cards instead of radeon, which
enables vulkan support in userspace
- msm gets gen8 gpu support
- initial Xe3P support in xe
Full detail summary:
New driver:
- Arm Ethos-U65/U85 accel driver
Core:
- support the drm color pipeline in vkms/amdgfx
- add support for drm colorop pipeline
- add COLOR PIPELINE plane property
- add DRM_CLIENT_CAP_PLANE_COLOR_PIPELINE
- throttle dirty worker with vblank
- use drm_for_each_bridge_in_chain_scoped in drm's bridge code
- Ensure drm_client_modeset tests are enabled in UML
- add simulated vblank interrupt - use in drivers
- dumb buffer sizing helper
- move freeing of drm client memory to driver
- crtc sharpness strength property
- stop using system_wq in scheduler/drivers
- support emergency restore in drm-client
Rust:
- make slice::as_flattened usable on all supported rustc
- add FromBytes::from_bytes_prefix() method
- remove redundant device ptr from Rust GEM object
- Change how AlwaysRefCounted is implemented for GEM objects
gpuvm:
- Add deferred vm_bo cleanup to GPUVM (for rust)
atomic:
- cleanup and improve state handling interfaces
buddy:
- optimize block management
dma-buf:
- heaps: Create heap per CMA reserved location
- improve userspace documentation
dp:
- add POST_LT_ADJ_REQ training sequence
- DPCD dSC quirk for synaptics panamera devices
- helpers to query branch DSC max throughput
ttm:
- Rename ttm_bo_put to ttm_bo_fini
- allow page protection flags on risc-v
- rework pipelined eviction fence handling
amdgpu:
- enable amdgpu by default for SI/CI dGPUs
- enable DC by default on SI
- refactor CIK/SI enablement
- add ABM KMS property
- Re-enable DM idle optimizations
- DC Analog encoders support
- Powerplay fixes for fiji/iceland
- Enable DC on bonaire by default
- HMM cleanup
- Add new RAS framework
- DML2.1 updates
- YCbCr420 fixes
- DC FP fixes
- DMUB fixes
- LTTPR fixes
- DTBCLK fixes
- DMU cursor offload handling
- Userq validation improvements
- Unify shutdown callback handling
- Suspend improvements
- Power limit code cleanup
- SR-IOV fixes
- AUX backlight fixes
- DCN 3.5 fixes
- HDMI compliance fixes
- DCN 4.0.1 cursor updates
- DCN interrupt fix
- DC KMS full update improvements
- Add additional HDCP traces
- DCN 3.2 fixes
- DP MST fixes
- Add support for new SR-IOV mailbox interface
- UQ reset support
- HDP flush rework
- VCE1 support
amdkfd:
- HMM cleanups
- Relax checks on save area overallocations
- Fix GPU mappings after prefetch
radeon:
- refactor CIK/SI enablement
xe:
- Initial Xe3P support
- panic support on VRAM for display
- fix stolen size check
- Loosen used tracking restriction
- New SR-IOV debugfs structure and debugfs updates
- Hide the GPU madvise flag behind a VM_BIND flag
- Always expose VRAM provisioning data on discrete GPUs
- Allow VRAM mappings for userptr when used with SVM
- Allow pinning of p2p dma-buf
- Use per-tile debugfs where appropriate
- Add documentation for Execution Queues
- PF improvements
- VF migration recovery redesign work
- User / Kernel VRAM partitioning
- Update Tile-based messages
- Allow configfs to disable specific GT types
- VF provisioning and migration improvements
- use SVM range helpers in PT layer
- Initial CRI support
- access VF registers using dedicated MMIO view
- limit number of jobs per exec queue
- add sriov_admin sysfs tree
- more crescent island specific support
- debugfs residency counter
- SRIOV migration work
- runtime registers for GFX 35
i915:
- add initial Xe3p_LPD display version 35 support
- Enable LNL+ content adaptive sharpness filter
- Use optimized VRR guardband
- Enable Xe3p LT PHY
- enable FBC support for Xe3p_LPD display
- add display 30.02 firmware support
- refactor SKL+ watermark latency setup
- refactor fbdev handling
- call i915/xe runtime PM via function pointers
- refactor i915/xe stolen memory/display interfaces
- use display version instead of gfx version in display code
- extend i915_display_info with Type-C port details
- lots of display cleanups/refactorings
- set O_LARGEFILE in __create_shmem
- skuip guc communication warning on reset
- fix time conversions
- defeature DRRS on LNL+
- refactor intel_frontbuffer split between i915/xe/display
- convert inteL_rom interfaces to struct drm_device
- unify display register polling interfaces
- aovid lock inversion when pinning to GGTT on CHV/BXT+VTD
panel:
- Add KD116N3730A08/A12, chromebook mt8189
- JT101TM023, LQ079L1SX01,
- GLD070WX3-SL01 MIPI DSI
- Samsung LTL106AL0, Samsung LTL106AL01
- Raystar RFF500F-AWH-DNN
- Winstar WF70A8SYJHLNGA
- Wanchanglong w552946aaa
- Samsung SOFEF00
- Lenovo X13s panel
- ilitek-ili9881c - add rpi 5" support
- visionx-rm69299 - add backlight support
- edp - support AUI B116XAN02.0
bridge:
- improve ref counting
- ti-sn65dsi86 - add support for DP mode with HPD
- synopsis: support CEC, init timer with correct freq
- ASL CS5263 DP-to-HDMI bridge support
nova-core:
- introduce bitfield! macro
- introduce safe integer converters
- GSP inits to fully booted state on Ampere
- Use more future-proof register for GPU identification
nova-drm:
- select NOVA_CORE
- 64-bit only
nouveau:
- improve reclocking on tegra 186+
- add large page and compression support
msm:
- GPU:
- Gen8 support: A840 (Kaanapali) and X2-85 (Glymur)
- A612 support
- MDSS:
- Added support for Glymur and QCS8300 platforms
- DPU:
- Enabled Quad-Pipe support, unlocking higher resolutions support
- Added support for Glymur platform
- Documented DPU on QCS8300 platform as supported
- DisplayPort:
- Added support for Glymur platform
- Added support lame remapping inside DP block
- Documented DisplayPort controller on QCS8300 and SM6150/QCS615
as supported
tegra:
- NVJPG driver
panfrost:
- display JM contexts over debugfs
- export JM contexts to userspace
- improve error and job handling
panthor:
- support custom ASN_HASH for mt8196
- support mali-G1 GPU
- flush shmem write before mapping buffers uncached
- make timeout per-queue instead of per-job
mediatek:
- MT8195/88 HDMIv2/DDCv2 support
rockchip:
- dsi: add support for RK3368
amdxdna:
- enhance runtime PM
- last hardware error reading uapi
- support firmware debug output
- add resource and telemetry data uapi
- preemption support
imx:
- add driver for HDMI TX Parallel audio interface
ivpu:
- add support for user-managed preemption buffer
- add userptr support
- update JSM firware API to 3.33.0
- add better alloc/free warnings
- fix page fault in unbind all bos
- rework bind/unbind of imported buffers
- enable MCA ECC signalling
- split fw runtime and global memory buffers
- add fdinfo memory statistics
tidss:
- convert to drm logging
- logging cleanup
ast:
- refactor generation init paths
- add per chip generation detect_tx_chip
- set quirks for each chip model
atmel-hlcdc:
- set LCDC_ATTRE register in plane disable
- set correct values for plane scaler
solomon:
- use drm helper for get_modes and move_valid
sitronix:
- fix output position when clearing screens
qaic:
- support dma-buf exports
- support new firmware's READ_DATA implementation
- sahara AIC200 image table update
- add sysfs support
- add coredump support
- add uevents support
- PM support
sun4i:
- layer refactors to decouple plane from output
- improve DE33 support
vc4:
- switch to generic CEC helpers
komeda:
- use drm_ logging functions
vkms:
- configfs support for display configuration
vgem:
- fix fence timer deadlock
etnaviv:
- add HWDB entry for GC8000 Nano Ultra VIP r6205"
* tag 'drm-next-2025-12-03' of https://gitlab.freedesktop.org/drm/kernel: (1869 commits)
Revert "drm/amd: Skip power ungate during suspend for VPE"
drm/amdgpu: use common defines for HUB faults
drm/amdgpu/gmc12: add amdgpu_vm_handle_fault() handling
drm/amdgpu/gmc11: add amdgpu_vm_handle_fault() handling
drm/amdgpu: use static ids for ACP platform devs
drm/amdgpu/sdma6: Update SDMA 6.0.3 FW version to include UMQ protected-fence fix
drm/amdgpu: Forward VMID reservation errors
drm/amdgpu/gmc8: Delegate VM faults to soft IRQ handler ring
drm/amdgpu/gmc7: Delegate VM faults to soft IRQ handler ring
drm/amdgpu/gmc6: Delegate VM faults to soft IRQ handler ring
drm/amdgpu/gmc6: Cache VM fault info
drm/amdgpu/gmc6: Don't print MC client as it's unknown
drm/amdgpu/cz_ih: Enable soft IRQ handler ring
drm/amdgpu/tonga_ih: Enable soft IRQ handler ring
drm/amdgpu/iceland_ih: Enable soft IRQ handler ring
drm/amdgpu/cik_ih: Enable soft IRQ handler ring
drm/amdgpu/si_ih: Enable soft IRQ handler ring
drm/amd/display: fix typo in display_mode_core_structs.h
drm/amd/display: fix Smart Power OLED not working after S4
drm/amd/display: Move RGB-type check for audio sync to DCE HW sequence
...
|
|
Calculate packet parameters for video mode same way it is done for
command mode, by halving timings plugged into equations.
Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: https://patch.msgid.link/20250909073335.91531-3-clamor95@gmail.com
|
|
Move SOL delay calculation outside of video mode conditions.
Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: https://patch.msgid.link/20250909073335.91531-2-clamor95@gmail.com
|
|
Commit b6bcbce33596 ("soc/tegra: pmc: Ensure power-domains are in a
known state") was introduced so that all power domains get initialized
to a known working state when booting and it does this by shutting them
down (including asserting resets and disabling clocks) before registering
each power domain with the genpd framework, leaving it to each driver to
later on power its needed domains.
This caused the Google Pixel C to hang when booting due to a workaround
in the DSI driver introduced in commit b22fd0b9639e ("drm/tegra: dsi:
Clear enable register if powered by bootloader") meant to handle the case
where the bootloader enabled the DSI hardware module. The workaround relies
on reading a hardware register to determine the current status and after
b6bcbce33596 that now happens in a powered down state thus leading to
the boot hang.
Fix this by reverting b22fd0b9639e since currently we are guaranteed
that the hardware will be fully reset by the time we start enabling the
DSI module.
Fixes: b6bcbce33596 ("soc/tegra: pmc: Ensure power-domains are in a known state")
Cc: stable@vger.kernel.org
Signed-off-by: Diogo Ivo <diogo.ivo@tecnico.ulisboa.pt>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: https://patch.msgid.link/20251103-diogo-smaug_ec_typec-v1-1-be656ccda391@tecnico.ulisboa.pt
|
|
There are a gazillion files that depend on drm_print.h being indirectly
included via drm_buddy.h, drm_mm.h, or ttm/ttm_resource.h. In
preparation for removing those includes, explicitly include drm_print.h
where needed.
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://lore.kernel.org/r/5fe67395907be33eb5199ea6d540e29fddee71c8.1761734313.git.jani.nikula@intel.com
|
|
Replace platform_get_resource + devm_ioremap_resource
with just devm_platform_ioremap_resource()
Used Coccinelle to do this change. SmPl patch:
@rule_1@
identifier res;
expression ioremap_res;
identifier pdev;
@@
-struct resource *res;
...
-res = platform_get_resource(pdev,...);
-ioremap_res = devm_ioremap_resource(...);
+ioremap_res = devm_platform_ioremap_resource(pdev,0);
Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: Mikko Perttunen <mperttunen@nvidia.com>
Reviewed-by: Maxime Ripard <mripard@kernel.org>
Signed-off-by: Anusha Srivatsa <asrivats@redhat.com>
Link: https://patchwork.freedesktop.org/patch/640855/?series=144073&rev=5
|
|
The mode_valid() callbacks of drm_encoder, drm_crtc and drm_bridge
take a const struct drm_display_mode argument. Change the mode_valid
callback of drm_connector to also take a const argument.
Acked-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Liviu Dudau <liviu.dudau@arm.com>
Reviewed-by: Raphael Gallais-Pou <rgallaispou@gmail.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: Maxime Ripard <mripard@kernel.org>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241214-drm-connector-mode-valid-const-v2-5-4f9498a4c822@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
|
|
The continual trickle of small conversion patches is grating on me, and
is really not helping. Just get rid of the 'remove_new' member
function, which is just an alias for the plain 'remove', and had a
comment to that effect:
/*
* .remove_new() is a relic from a prototype conversion of .remove().
* New drivers are supposed to implement .remove(). Once all drivers are
* converted to not use .remove_new any more, it will be dropped.
*/
This was just a tree-wide 'sed' script that replaced '.remove_new' with
'.remove', with some care taken to turn a subsequent tab into two tabs
to make things line up.
I did do some minimal manual whitespace adjustment for places that used
spaces to line things up.
Then I just removed the old (sic) .remove_new member function, and this
is the end result. No more unnecessary conversion noise.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
of tegra_dsi_probe()
If an error occurs after calling pm_runtime_enable(), pm_runtime_disable()
should be called as already done in the remove function.
Fixes: ef8187d75265 ("drm/tegra: dsi: Implement runtime PM")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: https://patchwork.freedesktop.org/patch/msgid/ee4a15c9cd4b574a55cd67c30d2411239ba2cee9.1693667005.git.christophe.jaillet@wanadoo.fr
|
|
If an error occurs after calling tegra_output_probe(),
tegra_output_remove() should be called as already done in the remove
function.
Fixes: dec727399a4b ("drm/tegra: Add DSI support")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: https://patchwork.freedesktop.org/patch/msgid/16820073278d031f6c474a08d5f22a255158585e.1693667005.git.christophe.jaillet@wanadoo.fr
|
|
Add check for the return value of of_find_device_by_node() and return
the error if it fails in order to avoid NULL pointer dereference.
Fixes: e94236cde4d5 ("drm/tegra: dsi: Add ganged mode support")
Signed-off-by: Chen Ni <nichen@iscas.ac.cn>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231024080738.825553-1-nichen@iscas.ac.cn
|
|
Use managed memory allocation for this. That allows us to not keep
track of all the files any more.
v2: keep drm_debugfs_cleanup(), but rename to drm_debugfs_unregister(),
we still need to cleanup the symlink
Signed-off-by: Christian König <christian.koenig@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230829110115.3442-6-christian.koenig@amd.com
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
|
|
In cases where the DSI module is left on by the bootloader
some panels may fail to initialize if the enable register is not cleared
before the panel's initialization sequence is sent, so clear it if that
is the case.
Signed-off-by: Diogo Ivo <diogo.ivo@tecnico.ulisboa.pt>
Signed-off-by: Thierry Reding <treding@nvidia.com>
|
|
When possible use dev_err_probe help to properly deal with the
PROBE_DEFER error, the benefit is that DEFER issue will be logged
in the devices_deferred debugfs file.
And using dev_err_probe() can reduce code size, the error value
gets printed.
Signed-off-by: Cai Huoqing <caihuoqing@baidu.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
|
|
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is (mostly) ignored
and this typically results in resource leaks. To improve here there is a
quest to make the remove callback return void. In the first step of this
quest all drivers are converted to .remove_new() which already returns
void.
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Thierry Reding <treding@nvidia.com>
|
|
This function returned zero unconditionally. Make it return no value and
simplify all callers accordingly.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Acked-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Thierry Reding <treding@nvidia.com>
|
|
The reference taken by 'of_find_device_by_node()' must be released when
not needed anymore. Add put_device() call to fix this.
Fixes: e94236cde4d5 ("drm/tegra: dsi: Add ganged mode support")
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
|
|
The PM reference count is not expected to be incremented on return in
these Tegra functions.
However, pm_runtime_get_sync() will increment the PM reference count
even on failure. Forgetting to put the reference again will result in
a leak.
Replace it with pm_runtime_resume_and_get() to keep the usage counter
balanced.
Fixes: fd67e9c6ed5a ("drm/tegra: Do not implement runtime PM")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Qinglang Miao <miaoqinglang@huawei.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
|
|
Pull drm updates from Dave Airlie:
"Not a major amount of change, the i915 trees got split into display
and gt trees to better facilitate higher level review, and there's a
major refactoring of i915 GEM locking to use more core kernel concepts
(like ww-mutexes). msm gets per-process pagetables, older AMD SI cards
get DC support, nouveau got a bump in displayport support with common
code extraction from i915.
Outside of drm this contains a couple of patches for hexint
moduleparams which you've acked, and a virtio common code tree that
you should also get via it's regular path.
New driver:
- Cadence MHDP8546 DisplayPort bridge driver
core:
- cross-driver scatterlist cleanups
- devm_drm conversions
- remove drm_dev_init
- devm_drm_dev_alloc conversion
ttm:
- lots of refactoring and cleanups
bridges:
- chained bridge support in more drivers
panel:
- misc new panels
scheduler:
- cleanup priority levels
displayport:
- refactor i915 code into helpers for nouveau
i915:
- split into display and GT trees
- WW locking refactoring in GEM
- execbuf2 extension mechanism
- syncobj timeline support
- GEN 12 HOBL display powersaving
- Rocket Lake display additions
- Disable FBC on Tigerlake
- Tigerlake Type-C + DP improvements
- Hotplug interrupt refactoring
amdgpu:
- Sienna Cichlid updates
- Navy Flounder updates
- DCE6 (SI) support for DC
- Plane rotation enabled
- TMZ state info ioctl
- PCIe DPC recovery support
- DC interrupt handling refactor
- OLED panel fixes
amdkfd:
- add SMI events for thermal throttling
- SMI interface events ioctl update
- process eviction counters
radeon:
- move to dma_ for allocations
- expose sclk via sysfs
msm:
- DSI support for sm8150/sm8250
- per-process GPU pagetable support
- Displayport support
mediatek:
- move HDMI phy driver to PHY
- convert mtk-dpi to bridge API
- disable mt2701 tmds
tegra:
- bridge support
exynos:
- misc cleanups
vc4:
- dual display cleanups
ast:
- cleanups
gma500:
- conversion to GPIOd API
hisilicon:
- misc reworks
ingenic:
- clock handling and format improvements
mcde:
- DSI support
mgag200:
- desktop g200 support
mxsfb:
- i.MX7 + i.MX8M
- alpha plane support
panfrost:
- devfreq support
- amlogic SoC support
ps8640:
- EDID from eDP retrieval
tidss:
- AM65xx YUV workaround
virtio:
- virtio-gpu exported resources
rcar-du:
- R8A7742, R8A774E1 and R8A77961 support
- YUV planar format fixes
- non-visible plane handling
- VSP device reference count fix
- Kconfig fix to avoid displaying disabled options in .config"
* tag 'drm-next-2020-10-15' of git://anongit.freedesktop.org/drm/drm: (1494 commits)
drm/ingenic: Fix bad revert
drm/amdgpu: Fix invalid number of character '{' in amdgpu_acpi_init
drm/amdgpu: Remove warning for virtual_display
drm/amdgpu: kfd_initialized can be static
drm/amd/pm: setup APU dpm clock table in SMU HW initialization
drm/amdgpu: prevent spurious warning
drm/amdgpu/swsmu: fix ARC build errors
drm/amd/display: Fix OPTC_DATA_FORMAT programming
drm/amd/display: Don't allow pstate if no support in blank
drm/panfrost: increase readl_relaxed_poll_timeout values
MAINTAINERS: Update entry for st7703 driver after the rename
Revert "gpu/drm: ingenic: Add option to mmap GEM buffers cached"
drm/amd/display: HDMI remote sink need mode validation for Linux
drm/amd/display: Change to correct unit on audio rate
drm/amd/display: Avoid set zero in the requested clk
drm/amdgpu: align frag_end to covered address space
drm/amdgpu: fix NULL pointer dereference for Renoir
drm/vmwgfx: fix regression in thp code due to ttm init refactor.
drm/amdgpu/swsmu: add interrupt work handler for smu11 parts
drm/amdgpu/swsmu: add interrupt work function
...
|
|
calibration done
With the split of MIPI calibration into tegra_mipi_calibrate() and
tegra_mipi_wait(), MIPI clock is not kept enabled and mutex is not locked
till the calibration is done.
So, this patch keeps MIPI clock enabled and mutex locked after triggering
start of calibration till its done.
To let calibration process go through its finite sequence codes before
calibration logic waiting for pads idle state added wait time of 75usec
to make sure it sees idle state to apply the results.
This patch renames tegra_mipi_calibrate() as tegra_mipi_start_calibration()
and tegra_mipi_wait() as tegra_mipi_finish_calibration() to be inline
with their usage.
Reviewed-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Sowjanya Komatineni <skomatineni@nvidia.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
Backmerging drm-next into drm-misc-next for nouveau and panel updates.
Resolves a conflict between ttm and nouveau, where struct ttm_mem_res got
renamed to struct ttm_resource.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
|
|
These functions are now empty and no longer
useful so remove the functions and their uses.
Signed-off-by: Joe Perches <joe@perches.com>
Cc: Bernard Zhao <bernard@vivo.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Maxime Ripard <mripard@kernel.org>,
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Icenowy Zheng <icenowy@aosc.io>,
Cc: Jagan Teki <jagan@amarulasolutions.com>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Robert Chiras <robert.chiras@nxp.com>
Cc: dri-devel@lists.freedesktop.org,
Cc: linux-kernel@vger.kernel.org
Cc: opensource.kernel@vivo.com
Signed-off-by: Sam Ravnborg <sam@ravnborg.org> # Fixed build and a few warnings
Link: https://patchwork.freedesktop.org/patch/msgid/9e13761020750b1ce2f1fabee23ef6e2a2942882.camel@perches.com
|
|
SW can trigger MIPI pads calibration any time after power on
but calibration results will be latched and applied to the pads
by MIPI CAL unit only when the link is in LP-11 state and then
status register will be updated.
For CSI, trigger of pads calibration happen during CSI stream
enable where CSI receiver is kept ready prior to sensor or CSI
transmitter stream start.
So, pads may not be in LP-11 at this time and waiting for the
calibration to be done immediate after calibration start will
result in timeout.
This patch splits tegra_mipi_calibrate() and tegra_mipi_wait()
so triggering for calibration and waiting for it to complete can
happen at different stages.
Signed-off-by: Sowjanya Komatineni <skomatineni@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
|
|
Tegra CSI driver need a separate MIPI device for each channel as
calibration of corresponding MIPI pads for each channel should
happen independently.
So, this patch updates tegra_mipi_request() API to add a device_node
pointer argument to allow creating mipi device for specific device
node rather than a device.
Signed-off-by: Sowjanya Komatineni <skomatineni@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
|
|
The tegra driver uses empty implementations for its encoders. Replace
the code with the generic simple encoder.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20200305155950.2705-16-tzimmermann@suse.de
|
|
Since 987d65d01356 (drm: debugfs: make
drm_debugfs_create_files() never fail) there is no need to check the
return value of drm_debugfs_create_files(). Therefore, remove the
return checks and error handling of the drm_debugfs_create_files()
function from various debugfs init functions in drm/tegra and have
them return 0 directly.
v2: remove conversion of tegra_debugfs_init() to void to avoid build
breakage.
References: https://lists.freedesktop.org/archives/dri-devel/2020-February/257183.html
Signed-off-by: Wambui Karuga <wambui.karugax@gmail.com>
Acked-by: Thierry Reding <treding@nvidia.com>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20200310133121.27913-2-wambui.karugax@gmail.com
|
|
The Tegra DRM driver heavily relies on the implementations for runtime
suspend/resume to be called at specific times. Unfortunately, there are
some cases where that doesn't work. One example is if the user disables
runtime PM for a given subdevice. Another example is that the PM core
acquires a reference to runtime PM during system sleep, effectively
preventing devices from going into low power modes. This is intentional
to avoid nasty race conditions, but it also causes system sleep to not
function properly on all Tegra systems.
Fix this by not implementing runtime PM at all. Instead, a minimal,
reference-counted suspend/resume infrastructure is added to the host1x
bus. This has the benefit that it can be used regardless of the system
power state (or any transitions we might be in), or whether or not the
user allows runtime PM.
Atomic modesetting guarantees that these functions will end up being
called at the right point in time, so the pitfalls for the more generic
runtime PM do not apply here.
Signed-off-by: Thierry Reding <treding@nvidia.com>
|
|
Rename the host1x clients' parent to "host" because that more closely
describes what it is. The parent can be confused with the parent device
in terms of the device hierarchy. Subsequent patches will add a new
member that refers to the parent in that hierarchy.
Signed-off-by: Thierry Reding <treding@nvidia.com>
|
|
Drop use of the deprecated drmP.h header file.
For all touched files divide include files into blocks,
and sort them within the blocks.
Fix fallout.
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Thierry Reding <treding@nvidia.com>
Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: Jonathan Hunter <jonathanh@nvidia.com>
Cc: linux-tegra@vger.kernel.org
Link: https://patchwork.freedesktop.org/patch/msgid/20190804094132.29463-3-sam@ravnborg.org
|
|
Based on 2 normalized pattern(s):
this program is free software you can redistribute it and or modify
it under the terms of the gnu general public license version 2 as
published by the free software foundation
this program is free software you can redistribute it and or modify
it under the terms of the gnu general public license version 2 as
published by the free software foundation #
extracted by the scancode license scanner the SPDX license identifier
GPL-2.0-only
has been chosen to replace the boilerplate/reference in 4122 file(s).
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Enrico Weigelt <info@metux.net>
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Allison Randal <allison@lohutok.net>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190604081206.933168790@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Again to align with the usual prefix of just drm_connector_. Again
done with sed + manual fixup for indent issues.
Reviewed-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180709084016.23750-7-daniel.vetter@ffwll.ch
|
|
Right now, the DRM panel logic returns NULL when a panel pointing to
the passed OF node is not present in the list of registered panels.
Most drivers interpret this NULL value as -EPROBE_DEFER, but we are
about to modify the semantic of of_drm_find_panel() and let the
framework return -ENODEV when the device node we're pointing to has
a status property that is not equal to "okay" or "ok".
Let's first patch the of_drm_find_panel() implementation to return
ERR_PTR(-EPROBE_DEFER) instead of NULL and patch all callers to replace
the '!panel' check by an 'IS_ERR(panel)' one.
Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180509130042.9435-2-boris.brezillon@bootlin.com
|
|
The regulator is controlled as part of runtime PM, so it should not be
additionally disabled from the ->exit() callback.
Signed-off-by: Thierry Reding <treding@nvidia.com>
|
|
The ->late_register() and ->early_unregister() callbacks are called at
the right time to make sure userspace only accesses interfaces when it
should. Move debugfs registration and unregistration to these callback
functions to avoid potential races with userspace.
Signed-off-by: Thierry Reding <treding@nvidia.com>
|
|
After commit 75af8fa7fd47 ("drm/tegra: dsi: Trace register accesses"),
the debugfs register dump implementation causes excessive stack usage
and can result in build warnings. To fix this, move the register
definitions into a table and iterate over the table while dumping the
registers to debugfs.
Signed-off-by: Thierry Reding <treding@nvidia.com>
|
|
git://anongit.freedesktop.org/tegra/linux into drm-next
drm/tegra: Changes for v4.14-rc1
This contains a couple of fixes and improvements for host1x, with some
preparatory work for Tegra186 support.
The remainder is cleanup and minor bugfixes for Tegra DRM along with
enhancements to debuggability.
There have also been some enhancements to the kernel interfaces for
host1x job submissions and support for mmap'ing PRIME buffers directly,
all of which get the interfaces very close to ready for serious work.
* tag 'drm/tegra/for-4.14-rc1' of git://anongit.freedesktop.org/tegra/linux: (21 commits)
drm/tegra: Prevent BOs from being freed during job submission
drm/tegra: gem: Implement mmap() for PRIME buffers
drm/tegra: Support render node
drm/tegra: sor: Trace register accesses
drm/tegra: dpaux: Trace register accesses
drm/tegra: dsi: Trace register accesses
drm/tegra: hdmi: Trace register accesses
drm/tegra: dc: Trace register accesses
drm/tegra: sor: Use unsigned int for register offsets
drm/tegra: hdmi: Use unsigned int for register offsets
drm/tegra: dsi: Use unsigned int for register offsets
drm/tegra: dpaux: Use unsigned int for register offsets
drm/tegra: dc: Use unsigned int for register offsets
drm/tegra: Fix NULL deref in debugfs/iova
drm/tegra: switch to drm_*_get(), drm_*_put() helpers
drm/tegra: Set MODULE_FIRMWARE for the VIC
drm/tegra: Add CONFIG_OF dependency
gpu: host1x: Support sub-devices recursively
gpu: host1x: fix error return code in host1x_probe()
gpu: host1x: Fix bitshift/mask multipliers
...
|
|
Add tracepoint events for DSI controller register accesses.
Signed-off-by: Thierry Reding <treding@nvidia.com>
|
|
Register offsets are usually fairly small numbers, so an unsigned int is
more than enough to represent them.
Signed-off-by: Thierry Reding <treding@nvidia.com>
|
|
It's dead code, the core handles all this directly now.
The only special case is nouveau and tda988x which used one function
for both legacy modeset code and -nv50 atomic world instead of 2
vtables. But amounts to exactly the same.
v2: Rebase over the panel/brideg refactorings in stm/ltdc.
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Cc: Archit Taneja <architt@codeaurora.org>
Cc: Andrzej Hajda <a.hajda@samsung.com>
Cc: Laurent Pinchart <Laurent.pinchart@ideasonboard.com>
Cc: Peter Senna Tschudin <peter.senna@collabora.com>
Cc: Martin Donnelly <martin.donnelly@ge.com>
Cc: Martyn Welch <martyn.welch@collabora.co.uk>
Cc: Daniel Vetter <daniel.vetter@intel.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Sean Paul <seanpaul@chromium.org>
Cc: David Airlie <airlied@linux.ie>
Cc: Inki Dae <inki.dae@samsung.com>
Cc: Joonyoung Shim <jy0922.shim@samsung.com>
Cc: Seung-Woo Kim <sw0312.kim@samsung.com>
Cc: Kyungmin Park <kyungmin.park@samsung.com>
Cc: Kukjin Kim <kgene@kernel.org>
Cc: Krzysztof Kozlowski <krzk@kernel.org>
Cc: Stefan Agner <stefan@agner.ch>
Cc: Alison Wang <alison.wang@freescale.com>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Philipp Zabel <p.zabel@pengutronix.de>
Cc: CK Hu <ck.hu@mediatek.com>
Cc: Matthias Brugger <matthias.bgg@gmail.com>
Cc: Neil Armstrong <narmstrong@baylibre.com>
Cc: Carlo Caione <carlo@caione.org>
Cc: Kevin Hilman <khilman@baylibre.com>
Cc: Marek Vasut <marex@denx.de>
Cc: Ben Skeggs <bskeggs@redhat.com>
Cc: Tomi Valkeinen <tomi.valkeinen@ti.com>
Cc: Eric Anholt <eric@anholt.net>
Cc: Mark Yao <mark.yao@rock-chips.com>
Cc: Heiko Stuebner <heiko@sntech.de>
Cc: Benjamin Gaignard <benjamin.gaignard@linaro.org>
Cc: Vincent Abriou <vincent.abriou@st.com>
Cc: Yannick Fertre <yannick.fertre@st.com>
Cc: Philippe Cornu <philippe.cornu@st.com>
Cc: Maxime Ripard <maxime.ripard@free-electrons.com>
Cc: Chen-Yu Tsai <wens@csie.org>
Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: Jonathan Hunter <jonathanh@nvidia.com>
Cc: Jyri Sarha <jsarha@ti.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Shawn Guo <shawnguo@kernel.org>
Cc: John Stultz <john.stultz@linaro.org>
Cc: Lars-Peter Clausen <lars@metafoo.de>
Cc: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Cc: Jeffy Chen <jeffy.chen@rock-chips.com>
Cc: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Cc: Yakir Yang <kuankuan.y@gmail.com>
Cc: Marek Szyprowski <m.szyprowski@samsung.com>
Cc: Jose Abreu <Jose.Abreu@synopsys.com>
Cc: Romain Perier <romain.perier@collabora.com>
Cc: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Cc: Xinliang Liu <z.liuxinliang@hisilicon.com>
Cc: Alexey Brodkin <abrodkin@synopsys.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Rongrong Zou <zourongrong@gmail.com>
Cc: Rob Clark <robdclark@gmail.com>
Cc: Hai Li <hali@codeaurora.org>
Cc: "Noralf Trønnes" <noralf@tronnes.org>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-samsung-soc@vger.kernel.org
Cc: intel-gfx@lists.freedesktop.org
Cc: linux-mediatek@lists.infradead.org
Cc: linux-amlogic@lists.infradead.org
Cc: nouveau@lists.freedesktop.org
Cc: linux-renesas-soc@vger.kernel.org
Cc: linux-rockchip@lists.infradead.org
Cc: linux-tegra@vger.kernel.org
Cc: virtualization@lists.linux-foundation.org
Cc: zain wang <wzz@rock-chips.com>
Cc: Baoyou Xie <baoyou.xie@linaro.org>
Cc: Boris Brezillon <boris.brezillon@free-electrons.com>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20170725080122.20548-8-daniel.vetter@ffwll.ch
Acked-by: Neil Armstrong <narmstrong@baylibre.com>
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
Acked-by: Philipp Zabel <p.zabel@pengutronix.de>
Acked-by: Archit Taneja <architt@codeaurora.org>
Tested-by: Philippe Cornu <philippe.cornu@st.com> (on stm)
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Shawn Guo <shawnguo@kernel.org>
Acked-by: Shawn Guo <shawnguo@kernel.org>
Acked-by: Noralf Trønnes <noralf@tronnes.org>
Acked-by: Vincent Abriou <vincent.abriou@st.com>
|
|
The MIPI DSI output on Tegra SoCs requires some external logic to
calibrate the MIPI pads before a video signal can be transmitted. This
MIPI calibration logic requires to be powered on while the MIPI pads are
being used, which is currently done as part of the DSI driver's probe
implementation.
This is suboptimal because it will leave the MIPI calibration logic
powered up even if the DSI output is never used.
On Tegra114 and earlier this behaviour also causes the driver to hang
while trying to power up the MIPI calibration logic because the power
partition that contains the MIPI calibration logic will be powered on
by the display controller at output pipeline configuration time. Thus
the power up sequence for the MIPI calibration logic happens before
it's power partition is guaranteed to be enabled.
Fix this by splitting up the API into a request/free pair of functions
that manage the runtime dependency between the DSI and the calibration
modules (no registers are accessed) and a set of enable, calibrate and
disable functions that program the MIPI calibration logic at points in
time where the power partition is really enabled.
While at it, make sure that the runtime power management also works in
ganged mode, which is currently also broken.
Reported-by: Jonathan Hunter <jonathanh@nvidia.com>
Tested-by: Jonathan Hunter <jonathanh@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
|
|
git://anongit.freedesktop.org/tegra/linux into drm-next
drm/tegra: Changes for v4.8-rc1
This set of changes contains a bunch of cleanups to the host1x driver as
well as the addition of a pin controller for DPAUX, which is required by
boards to configure the DPAUX pads in AUX mode (for DisplayPort) or I2C
mode (for HDMI and DDC).
Included is also a bit of rework of the SOR driver in preparation to add
DisplayPort support as well as some refactoring and cleanup.
Finally, all output drivers are converted to runtime PM, which greatly
simplifies the handling of clocks and resets.
* tag 'drm/tegra/for-4.8-rc1' of git://anongit.freedesktop.org/tegra/linux: (35 commits)
drm/tegra: sor: Reject HDMI 2.0 modes
drm/tegra: sor: Prepare for generic PM domain support
drm/tegra: dsi: Prepare for generic PM domain support
drm/tegra: sor: Make XBAR configurable per SoC
drm/tegra: sor: Use sor1_src clock to set parent for HDMI
dt-bindings: display: tegra: Add source clock for SOR
drm/tegra: sor: Implement sor1_brick clock
drm/tegra: sor: Implement runtime PM
drm/tegra: hdmi: Implement runtime PM
drm/tegra: dsi: Implement runtime PM
drm/tegra: dc: Implement runtime PM
drm/tegra: hdmi: Enable audio over HDMI
drm/tegra: sor: Do not support deep color modes
drm/tegra: sor: Extract tegra_sor_mode_set()
drm/tegra: sor: Split out tegra_sor_apply_config()
drm/tegra: sor: Rename tegra_sor_calc_config()
drm/tegra: sor: Factor out tegra_sor_set_parent_clock()
drm/tegra: dpaux: Add pinctrl support
dt-bindings: Add bindings for Tegra DPAUX pinctrl driver
drm/tegra: Prepare DPAUX for supporting generic PM domains
...
|
|
The DSI driver for Tegra requires the SOR power partition to be enabled.
Now that Tegra supports the generic PM domain framework we manage the
SOR power partition via this framework. However, the sequence for
gating/ungating the SOR power partition requires that the DSI reset is
asserted/de-asserted at the time the SOR power partition is
gated/ungated, respectively. Now that the reset control core assumes
that resets are exclusive, the Tegra generic PM domain code and the DSI
driver cannot request the same reset unless we mark the reset as shared.
Sharing resets will not work in this case because we cannot guarantee
that the reset will be asserted/de-asserted at the appropriate time.
Therefore, given that the Tegra generic PM domain code will handle the
resets, do not request the reset in the DSI driver if the DSI device has
a PM domain associated.
Signed-off-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
|
|
Use runtime PM to clock-(un)gate, (de)assert reset and control power to
the DSI controller. This ties in nicely with atomic DPMS in that a
runtime PM reference is taken before a pipe is enabled and dropped after
it has been shut down.
Signed-off-by: Thierry Reding <treding@nvidia.com>
|
|
All outputs have a 1:1 relationship between connectors and encoders
and the driver is relying on the atomic helpers: we can drop the custom
->best_encoder() implementation and let the core call
drm_atomic_helper_best_encoder() for us.
Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1465300095-16971-14-git-send-email-boris.brezillon@free-electrons.com
|
|
Commit d2307dea14a4 ("drm/atomic: use connector references (v3)") added
reference counting for DRM connectors and this caused a crash when
exercising system suspend on Tegra114 Dalmore.
The Tegra DSI driver implements a Tegra specific function,
tegra_dsi_connector_duplicate_state(), to duplicate the connector state
and destroys the state using the generic helper function,
drm_atomic_helper_connector_destroy_state(). Following commit
d2307dea14a4 ("drm/atomic: use connector references (v3)") there is
now an imbalance in the connector reference count because the Tegra
function to duplicate state does not take a reference when duplicating
the state information. However, the generic helper function to destroy
the state information assumes a reference has been taken and during
system suspend, when the connector state is destroyed, this leads to a
crash because we attempt to put the reference for an object that has
already been freed.
Fix this by calling __drm_atomic_helper_connector_duplicate_state() from
tegra_dsi_connector_duplicate_state() to ensure that we take a reference
on a connector if crtc is set. Note that this will also copy the
connector state a 2nd time, but this should be harmless.
By fixing tegra_dsi_connector_duplicate_state() to take a reference,
although a crash was no longer seen, it was then observed that after
each system suspend-resume cycle, the reference would be one greater
than before the suspend-resume cycle. Following commit d2307dea14a4
("drm/atomic: use connector references (v3)"), it was found that we
also need to put the reference when calling the function
tegra_dsi_connector_reset() before freeing the state. Fix this by
updating tegra_dsi_connector_reset() to call the function
__drm_atomic_helper_connector_destroy_state() in order to put the
reference for the connector.
Fixes: d2307dea14a4 ("drm/atomic: use connector references (v3)")
Signed-off-by: Jon Hunter <jonathanh@nvidia.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Acked-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1463585856-16606-1-git-send-email-jonathanh@nvidia.com
|
|
state, v2.
Changes since v1:
- Do not reset if state allocation fails.
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Acked-by: Thierry Reding <treding@nvidia.com> #irc
Link: http://patchwork.freedesktop.org/patch/msgid/1451908400-25147-3-git-send-email-maarten.lankhorst@linux.intel.com
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
|
|
Done with coccinelle for the most part. However, it thinks '...' is
part of the semantic patch, so I put an 'int DOTDOTDOT' placeholder
in its place and got rid of it with sed afterwards.
@@
identifier dev, encoder, funcs;
@@
int drm_encoder_init(struct drm_device *dev,
struct drm_encoder *encoder,
const struct drm_encoder_funcs *funcs,
int encoder_type
+ ,const char *name, int DOTDOTDOT
)
{ ... }
@@
identifier dev, encoder, funcs;
@@
int drm_encoder_init(struct drm_device *dev,
struct drm_encoder *encoder,
const struct drm_encoder_funcs *funcs,
int encoder_type
+ ,const char *name, int DOTDOTDOT
);
@@
expression E1, E2, E3, E4;
@@
drm_encoder_init(E1, E2, E3, E4
+ ,NULL
)
v2: Add ', or NULL...' to @name kernel doc (Jani)
Annotate the function with __printf() attribute (Jani)
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1449670818-2966-1-git-send-email-ville.syrjala@linux.intel.com
|
|
In order to restore DPMS with atomic mode-setting, move all code from
the ->mode_set() callback into ->enable(). At the same time, rename the
->prepare() callback to ->disable() to use the names preferred by atomic
mode-setting. This simplifies the calling sequence and will allow DPMS
to use runtime PM in subsequent patches.
Signed-off-by: Thierry Reding <treding@nvidia.com>
|
|
The DSI host controller hasn't changed from Tegra132 to Tegra210, but
different characterization parameters may be required.
Signed-off-by: Thierry Reding <treding@nvidia.com>
|
|
The DSI host controller hasn't changed from Tegra124 to Tegra132, but
different characterization parameters may be required.
Signed-off-by: Thierry Reding <treding@nvidia.com>
|
