summaryrefslogtreecommitdiff
path: root/drivers/net/ethernet/intel/igb
AgeCommit message (Collapse)Author
5 daysMerge tag 'pci-v6.19-changes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci Pull PCI updates from Bjorn Helgaas: "Enumeration: - Enable host bridge emulation for PCI_DOMAINS_GENERIC platforms (Dan Williams) - Switch vmd from custom domain number allocator to the common allocator to prevent a potential race with new non-VMD buses (Dan Williams) - Enable Precision Time Measurement (PTM) only if device advertises support for a relevant role, to prevent invalid PTM Requests that cause ACS violations that are reported as AER Uncorrectable Non-Fatal errors (Mika Westerberg) Resource management: - Prevent resource tree corruption when BAR resize fails (Ilpo Järvinen) - Restore BARs to the original size if a BAR resize fails (Ilpo Järvinen) - Remove BAR release from BAR resize attempts by the xe, i915, and amdgpu drivers so the PCI core can restore BARs if the resize fails (Ilpo Järvinen) - Move Resizable BAR code to rebar.c (Ilpo Järvinen) - Add pci_rebar_size_supported() and use it in i915 and xe (Ilpo Järvinen) - Add pci_rebar_get_max_size() and use it in xe and amdgpu (Ilpo Järvinen) Power management and error handling: - For drivers using PCI legacy suspend, save config state at suspend so that state (not any earlier state from enumeration, probe, or error recovery) will be restored when resuming (Lukas Wunner) - For devices with no driver or a driver that lacks power management, save config state at hibernate so that state (not any earlier state from enumeration, probe, or error recovery) will be restored when resuming (Lukas Wunner) - Save device config space on device addition, before driver binding, so error recovery works more reliably (Lukas Wunner) - Drop pci_save_state() from several drivers that no longer need it since the PCI core always does it and pci_restore_state() no longer invalidates the saved state (Lukas Wunner) - Document use of pci_save_state() by drivers to capture the state they want restored during error recovery (Lukas Wunner) Power control: - Add a struct pci_ops.assert_perst() function pointer to assert/deassert PCIe PERST# and implement it for the qcom driver (Krishna Chaitanya Chundru) - Add DT binding and pwrctrl driver for the Toshiba TC9563 PCIe switch, which must be held in reset after poweron so the pwrctrl driver can configure the switch via I2C before bringing up the links (Krishna Chaitanya Chundru) Endpoint framework: - Convert the endpoint doorbell test to use a threaded IRQ to fix a 'sleeping while atomic' issue (Bhanu Seshu Kumar Valluri) - Add endpoint VNTB MSI doorbell support to reduce latency between host and endpoint (Frank Li) New native PCIe controller drivers: - Add CIX Sky1 host controller DT binding and driver (Hans Zhang) - Add NXP S32G host controller DT binding and driver (Vincent Guittot) - Add Renesas RZ/G3S host controller DT binding and driver (Claudiu Beznea) - Add SpacemiT K1 host controller DT binding and driver (Alex Elder) Amlogic Meson PCIe controller driver: - Update DT binding to name DBI region 'dbi', not 'elbi', and update driver to support both (Manivannan Sadhasivam) Apple PCIe controller driver: - Move struct pci_host_bridge allocation from pci_host_common_init() to callers, which significantly simplifies pcie-apple (Marc Zyngier) Broadcom STB PCIe controller driver: - Disable advertising ASPM L0s support correctly (Jim Quinlan) - Add a panic/die handler to print diagnostic info in case PCIe caused an unrecoverable abort (Jim Quinlan) Cadence PCIe controller driver: - Add module support for Cadence platform host and endpoint controller driver (Manikandan K Pillai) - Split headers into 'legacy' (LGA) and 'high perf' (HPA) to prepare for new CIX Sky1 driver (Manikandan K Pillai) MediaTek PCIe controller driver: - Convert DT binding to YAML schema (Christian Marangi) - Add Airoha AN7583 DT compatible and driver support (Christian Marangi) Qualcomm PCIe controller driver: - Add Qualcomm Kaanapali to SM8550 DT binding (Qiang Yu) - Add required 'power-domains' and 'resets' to qcom sa8775p, sc7280, sc8280xp, sm8150, sm8250, sm8350, sm8450, sm8550, x1e80100 DT schemas (Krzysztof Kozlowski) - Look up OPP using both frequency and data rate (not just frequency) so RPMh votes can account for both (Krishna Chaitanya Chundru) Rockchip DesignWare PCIe controller driver: - Add Rockchip RK3528 compatible strings in DT binding (Yao Zi) STMicroelectronics STM32MP25 PCIe controller driver: - Fix a race between link training and endpoint register initialization (Christian Bruel) - Align endpoint allocations to match the ATU requirements (Christian Bruel) Synopsys DesignWare PCIe controller driver: - Clear L1 PM Substate Capability 'Supported' bits unless glue driver says it's supported, which prevents users from enabling non-working L1SS. Currently only qcom and tegra194 support L1SS (Bjorn Helgaas) - Remove now-superfluous L1SS disable code from tegra194 (Bjorn Helgaas) - Configure L1SS support in dw-rockchip when DT says 'supports-clkreq' (Shawn Lin) TI Keystone PCIe controller driver: - Fail the probe instead of silently succeeding if ks_pcie_of_data didn't specify Root Complex or Endpoint mode (Siddharth Vadapalli) - Make keystone buildable as a loadable module, except on ARM32 where hook_fault_code() is __init (Siddharth Vadapalli)" * tag 'pci-v6.19-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci: (100 commits) MAINTAINERS: Add Manivannan Sadhasivam as PCI/pwrctrl maintainer MAINTAINERS: Add CIX Sky1 PCIe controller driver maintainer PCI: sky1: Add PCIe host support for CIX Sky1 dt-bindings: PCI: Add CIX Sky1 PCIe Root Complex bindings PCI: cadence: Add support for High Perf Architecture (HPA) controller MAINTAINERS: Add NXP S32G PCIe controller driver maintainer PCI: s32g: Add NXP S32G PCIe controller driver (RC) PCI: dwc: Add register and bitfield definitions dt-bindings: PCI: s32g: Add NXP S32G PCIe controller PCI: Add Renesas RZ/G3S host controller driver PCI: host-generic: Move bridge allocation outside of pci_host_common_init() dt-bindings: PCI: Add Renesas RZ/G3S PCIe controller binding PCI: Validate pci_rebar_size_supported() input Documentation: PCI: Amend error recovery doc with pci_save_state() rules treewide: Drop pci_save_state() after pci_restore_state() PCI/ERR: Ensure error recoverability at all times PCI/PM: Stop needlessly clearing state_saved on enumeration and thaw PCI/PM: Reinstate clearing state_saved in legacy and !PM codepaths PCI: dw-rockchip: Configure L1SS support PCI: tegra194: Remove unnecessary L1SS disable code ...
6 daysMerge tag 'net-next-6.19' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core & protocols: - Replace busylock at the Tx queuing layer with a lockless list. Resulting in a 300% (4x) improvement on heavy TX workloads, sending twice the number of packets per second, for half the cpu cycles. - Allow constantly busy flows to migrate to a more suitable CPU/NIC queue. Normally we perform queue re-selection when flow comes out of idle, but under extreme circumstances the flows may be constantly busy. Add sysctl to allow periodic rehashing even if it'd risk packet reordering. - Optimize the NAPI skb cache, make it larger, use it in more paths. - Attempt returning Tx skbs to the originating CPU (like we already did for Rx skbs). - Various data structure layout and prefetch optimizations from Eric. - Remove ktime_get() from the recvmsg() fast path, ktime_get() is sadly quite expensive on recent AMD machines. - Extend threaded NAPI polling to allow the kthread busy poll for packets. - Make MPTCP use Rx backlog processing. This lowers the lock pressure, improving the Rx performance. - Support memcg accounting of MPTCP socket memory. - Allow admin to opt sockets out of global protocol memory accounting (using a sysctl or BPF-based policy). The global limits are a poor fit for modern container workloads, where limits are imposed using cgroups. - Improve heuristics for when to kick off AF_UNIX garbage collection. - Allow users to control TCP SACK compression, and default to 33% of RTT. - Add tcp_rcvbuf_low_rtt sysctl to let datacenter users avoid unnecessarily aggressive rcvbuf growth and overshot when the connection RTT is low. - Preserve skb metadata space across skb_push / skb_pull operations. - Support for IPIP encapsulation in the nftables flowtable offload. - Support appending IP interface information to ICMP messages (RFC 5837). - Support setting max record size in TLS (RFC 8449). - Remove taking rtnl_lock from RTM_GETNEIGHTBL and RTM_SETNEIGHTBL. - Use a dedicated lock (and RCU) in MPLS, instead of rtnl_lock. - Let users configure the number of write buffers in SMC. - Add new struct sockaddr_unsized for sockaddr of unknown length, from Kees. - Some conversions away from the crypto_ahash API, from Eric Biggers. - Some preparations for slimming down struct page. - YAML Netlink protocol spec for WireGuard. - Add a tool on top of YAML Netlink specs/lib for reporting commonly computed derived statistics and summarized system state. Driver API: - Add CAN XL support to the CAN Netlink interface. - Add uAPI for reporting PHY Mean Square Error (MSE) diagnostics, as defined by the OPEN Alliance's "Advanced diagnostic features for 100BASE-T1 automotive Ethernet PHYs" specification. - Add DPLL phase-adjust-gran pin attribute (and implement it in zl3073x). - Refactor xfrm_input lock to reduce contention when NIC offloads IPsec and performs RSS. - Add info to devlink params whether the current setting is the default or a user override. Allow resetting back to default. - Add standard device stats for PSP crypto offload. - Leverage DSA frame broadcast to implement simple HSR frame duplication for a lot of switches without dedicated HSR offload. - Add uAPI defines for 1.6Tbps link modes. Device drivers: - Add Motorcomm YT921x gigabit Ethernet switch support. - Add MUCSE driver for N500/N210 1GbE NIC series. - Convert drivers to support dedicated ops for timestamping control, and away from the direct IOCTL handling. While at it support GET operations for PHY timestamping. - Add (and convert most drivers to) a dedicated ethtool callback for reading the Rx ring count. - Significant refactoring efforts in the STMMAC driver, which supports Synopsys turn-key MAC IP integrated into a ton of SoCs. - Ethernet high-speed NICs: - Broadcom (bnxt): - support PPS in/out on all pins - Intel (100G, ice, idpf): - ice: implement standard ethtool and timestamping stats - i40e: support setting the max number of MAC addresses per VF - iavf: support RSS of GTP tunnels for 5G and LTE deployments - nVidia/Mellanox (mlx5): - reduce downtime on interface reconfiguration - disable being an XDP redirect target by default (same as other drivers) to avoid wasting resources if feature is unused - Meta (fbnic): - add support for Linux-managed PCS on 25G, 50G, and 100G links - Wangxun: - support Rx descriptor merge, and Tx head writeback - support Rx coalescing offload - support 25G SPF and 40G QSFP modules - Ethernet virtual: - Google (gve): - allow ethtool to configure rx_buf_len - implement XDP HW RX Timestamping support for DQ descriptor format - Microsoft vNIC (mana): - support HW link state events - handle hardware recovery events when probing the device - Ethernet NICs consumer, and embedded: - usbnet: add support for Byte Queue Limits (BQL) - AMD (amd-xgbe): - add device selftests - NXP (enetc): - add i.MX94 support - Broadcom integrated MACs (bcmgenet, bcmasp): - bcmasp: add support for PHY-based Wake-on-LAN - Broadcom switches (b53): - support port isolation - support BCM5389/97/98 and BCM63XX ARL formats - Lantiq/MaxLinear switches: - support bridge FDB entries on the CPU port - use regmap for register access - allow user to enable/disable learning - support Energy Efficient Ethernet - support configuring RMII clock delays - add tagging driver for MaxLinear GSW1xx switches - Synopsys (stmmac): - support using the HW clock in free running mode - add Eswin EIC7700 support - add Rockchip RK3506 support - add Altera Agilex5 support - Cadence (macb): - cleanup and consolidate descriptor and DMA address handling - add EyeQ5 support - TI: - icssg-prueth: support AF_XDP - Airoha access points: - add missing Ethernet stats and link state callback - add AN7583 support - support out-of-order Tx completion processing - Power over Ethernet: - pd692x0: preserve PSE configuration across reboots - add support for TPS23881B devices - Ethernet PHYs: - Open Alliance OATC14 10BASE-T1S PHY cable diagnostic support - Support 50G SerDes and 100G interfaces in Linux-managed PHYs - micrel: - support for non PTP SKUs of lan8814 - enable in-band auto-negotiation on lan8814 - realtek: - cable testing support on RTL8224 - interrupt support on RTL8221B - motorcomm: support for PHY LEDs on YT853 - microchip: support for LAN867X Rev.D0 PHYs w/ SQI and cable diag - mscc: support for PHY LED control - CAN drivers: - m_can: add support for optional reset and system wake up - remove can_change_mtu() obsoleted by core handling - mcp251xfd: support GPIO controller functionality - Bluetooth: - add initial support for PASTa - WiFi: - split ieee80211.h file, it's way too big - improvements in VHT radiotap reporting, S1G, Channel Switch Announcement handling, rate tracking in mesh networks - improve multi-radio monitor mode support, and add a cfg80211 debugfs interface for it - HT action frame handling on 6 GHz - initial chanctx work towards NAN - MU-MIMO sniffer improvements - WiFi drivers: - RealTek (rtw89): - support USB devices RTL8852AU and RTL8852CU - initial work for RTL8922DE - improved injection support - Intel: - iwlwifi: new sniffer API support - MediaTek (mt76): - WED support for >32-bit DMA - airoha NPU support - regdomain improvements - continued WiFi7/MLO work - Qualcomm/Atheros: - ath10k: factory test support - ath11k: TX power insertion support - ath12k: BSS color change support - ath12k: statistics improvements - brcmfmac: Acer A1 840 tablet quirk - rtl8xxxu: 40 MHz connection fixes/support" * tag 'net-next-6.19' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1381 commits) net: page_pool: sanitise allocation order net: page pool: xa init with destroy on pp init net/mlx5e: Support XDP target xmit with dummy program net/mlx5e: Update XDP features in switch channels selftests/tc-testing: Test CAKE scheduler when enqueue drops packets net/sched: sch_cake: Fix incorrect qlen reduction in cake_drop wireguard: netlink: generate netlink code wireguard: uapi: generate header with ynl-gen wireguard: uapi: move flag enums wireguard: uapi: move enum wg_cmd wireguard: netlink: add YNL specification selftests: drv-net: Fix tolerance calculation in devlink_rate_tc_bw.py selftests: drv-net: Fix and clarify TC bandwidth split in devlink_rate_tc_bw.py selftests: drv-net: Set shell=True for sysfs writes in devlink_rate_tc_bw.py selftests: drv-net: Use Iperf3Runner in devlink_rate_tc_bw.py selftests: drv-net: introduce Iperf3Runner for measurement use cases selftests: drv-net: Add devlink_rate_tc_bw.py to TEST_PROGS net: ps3_gelic_net: Use napi_alloc_skb() and napi_gro_receive() Documentation: net: dsa: mention simple HSR offload helpers Documentation: net: dsa: mention availability of RedBox ...
7 daysMerge tag 'printk-for-6.19' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/printk/linux Pull printk updates from Petr Mladek: - Allow creaing nbcon console drivers with an unsafe write_atomic() callback that can only be called by the final nbcon_atomic_flush_unsafe(). Otherwise, the driver would rely on the kthread. It is going to be used as the-best-effort approach for an experimental nbcon netconsole driver, see https://lore.kernel.org/r/20251121-nbcon-v1-2-503d17b2b4af@debian.org Note that a safe .write_atomic() callback is supposed to work in NMI context. But some networking drivers are not safe even in IRQ context: https://lore.kernel.org/r/oc46gdpmmlly5o44obvmoatfqo5bhpgv7pabpvb6sjuqioymcg@gjsma3ghoz35 In an ideal world, all networking drivers would be fixed first and the atomic flush would be blocked only in NMI context. But it brings the question how reliable networking drivers are when the system is in a bad state. They might block flushing more reliable serial consoles which are more suitable for serious debugging anyway. - Allow to use the last 4 bytes of the printk ring buffer. - Prevent queuing IRQ work and block printk kthreads when consoles are suspended. Otherwise, they create non-necessary churn or even block the suspend. - Release console_lock() between each record in the kthread used for legacy consoles on RT. It might significantly speed up the boot. - Release nbcon context between each record in the atomic flush. It prevents stalls of the related printk kthread after it has lost the ownership in the middle of a record - Add support for NBCON consoles into KDB - Add %ptsP modifier for printing struct timespec64 and use it where possible - Misc code clean up * tag 'printk-for-6.19' of git://git.kernel.org/pub/scm/linux/kernel/git/printk/linux: (48 commits) printk: Use console_is_usable on console_unblank arch: um: kmsg_dump: Use console_is_usable drivers: serial: kgdboc: Drop checks for CON_ENABLED and CON_BOOT lib/vsprintf: Unify FORMAT_STATE_NUM handlers printk: Avoid irq_work for printk_deferred() on suspend printk: Avoid scheduling irq_work on suspend printk: Allow printk_trigger_flush() to flush all types tracing: Switch to use %ptSp scsi: snic: Switch to use %ptSp scsi: fnic: Switch to use %ptSp s390/dasd: Switch to use %ptSp ptp: ocp: Switch to use %ptSp pps: Switch to use %ptSp PCI: epf-test: Switch to use %ptSp net: dsa: sja1105: Switch to use %ptSp mmc: mmc_test: Switch to use %ptSp media: av7110: Switch to use %ptSp ipmi: Switch to use %ptSp igb: Switch to use %ptSp e1000e: Switch to use %ptSp ...
13 daysigb: extract GRXRINGS from .get_rxnfcBreno Leitao
Commit 84eaf4359c36 ("net: ethtool: add get_rx_ring_count callback to optimize RX ring queries") added specific support for GRXRINGS callback, simplifying .get_rxnfc. Remove the handling of GRXRINGS in .get_rxnfc() by moving it to the new .get_rx_ring_count(). This simplifies the RX ring count retrieval and aligns igb with the new ethtool API for querying RX ring parameters. Signed-off-by: Breno Leitao <leitao@debian.org> Signed-off-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com> Link: https://patch.msgid.link/20251125-gxring_intel-v2-5-f55cd022d28b@debian.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-11-24treewide: Drop pci_save_state() after pci_restore_state()Lukas Wunner
In 2009, commit c82f63e411f1 ("PCI: check saved state before restore") changed the behavior of pci_restore_state() such that it became necessary to call pci_save_state() afterwards, lest recovery from subsequent PCI errors fails. The commit has just been reverted and so all the pci_save_state() after pci_restore_state() calls that have accumulated in the tree are now superfluous. Drop them. Two drivers chose a different approach to achieve the same result: drivers/scsi/ipr.c and drivers/net/ethernet/intel/e1000e/netdev.c set the pci_dev's "state_saved" flag to true before calling pci_restore_state(). Drop this as well. Signed-off-by: Lukas Wunner <lukas@wunner.de> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Dave Jiang <dave.jiang@intel.com> Acked-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com> # qat Link: https://patch.msgid.link/c2b28cc4defa1b743cf1dedee23c455be98b397a.1760274044.git.lukas@wunner.de
2025-11-19igb: Switch to use %ptSpAndy Shevchenko
Use %ptSp instead of open coded variants to print content of struct timespec64 in human readable format. Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://patch.msgid.link/20251113150217.3030010-11-andriy.shevchenko@linux.intel.com Signed-off-by: Petr Mladek <pmladek@suse.com>
2025-10-28igb: use EOPNOTSUPP instead of ENOTSUPP in igb_get_sset_count()Kohei Enju
igb_get_sset_count() returns -ENOTSUPP when a given stringset is not supported, causing userland programs to get "Unknown error 524". Since EOPNOTSUPP should be used when error is propagated to userland, return -EOPNOTSUPP instead of -ENOTSUPP. Fixes: 9d5c824399de ("igb: PCI-Express 82575 Gigabit Ethernet driver") Signed-off-by: Kohei Enju <enjuk@amazon.com> Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2025-09-11Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski
Cross-merge networking fixes after downstream PR (net-6.17-rc6). Conflicts: net/netfilter/nft_set_pipapo.c net/netfilter/nft_set_pipapo_avx2.c c4eaca2e1052 ("netfilter: nft_set_pipapo: don't check genbit from packetpath lookups") 84c1da7b38d9 ("netfilter: nft_set_pipapo: use avx2 algorithm for insertions too") Only trivial adjacent changes (in a doc and a Makefile). Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-09-09igb: fix link test skipping when interface is admin downKohei Enju
The igb driver incorrectly skips the link test when the network interface is admin down (if_running == false), causing the test to always report PASS regardless of the actual physical link state. This behavior is inconsistent with other drivers (e.g. i40e, ice, ixgbe, etc.) which correctly test the physical link state regardless of admin state. Remove the if_running check to ensure link test always reflects the physical link state. Fixes: 8d420a1b3ea6 ("igb: correct link test not being run when link is down") Signed-off-by: Kohei Enju <enjuk@amazon.com> Reviewed-by: Paul Menzel <pmenzel@molgen.mpg.de> Tested-by: Rinitha S <sx.rinitha@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2025-09-09igb: Fix NULL pointer dereference in ethtool loopback testTianyu Xu
The igb driver currently causes a NULL pointer dereference when executing the ethtool loopback test. This occurs because there is no associated q_vector for the test ring when it is set up, as interrupts are typically not added to the test rings. Since commit 5ef44b3cb43b removed the napi_id assignment in __xdp_rxq_info_reg(), there is no longer a need to pass a napi_id to it. Therefore, simply use 0 as the last parameter. Fixes: 2c6196013f84 ("igb: Add AF_XDP zero-copy Rx support") Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com> Reviewed-by: Joe Damato <joe@dama.to> Signed-off-by: Tianyu Xu <tianyxu@cisco.com> Reviewed-by: Paul Menzel <pmenzel@molgen.mpg.de> Tested-by: Rinitha S <sx.rinitha@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2025-09-03igb: drop unnecessary constant casts to u16Jacek Kowalski
Remove unnecessary casts of constant values to u16. C's integer promotion rules make them ints no matter what. Additionally replace IGB_MNG_VLAN_NONE with resulting value rather than casting -1 to u16. Signed-off-by: Jacek Kowalski <jacek@jacekk.info> Suggested-by: Simon Horman <horms@kernel.org> Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com> Tested-by: Rinitha S <sx.rinitha@intel.com> (A Contingent worker at Intel) Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2025-08-18eth: intel: use vmalloc_array() to simplify codeQianfeng Rong
Remove array_size() calls and replace vmalloc() with vmalloc_array() to simplify the code and maintain consistency with existing kmalloc_array() usage. vmalloc_array() is also optimized better, resulting in less instructions being used. Signed-off-by: Qianfeng Rong <rongqianfeng@vivo.com> Link: https://patch.msgid.link/20250816090659.117699-2-rongqianfeng@vivo.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-07-30Merge tag 'net-next-6.17' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core & protocols: - Wrap datapath globals into net_aligned_data, to avoid false sharing - Preserve MSG_ZEROCOPY in forwarding (e.g. out of a container) - Add SO_INQ and SCM_INQ support to AF_UNIX - Add SIOCINQ support to AF_VSOCK - Add TCP_MAXSEG sockopt to MPTCP - Add IPv6 force_forwarding sysctl to enable forwarding per interface - Make TCP validation of whether packet fully fits in the receive window and the rcv_buf more strict. With increased use of HW aggregation a single "packet" can be multiple 100s of kB - Add MSG_MORE flag to optimize large TCP transmissions via sockmap, improves latency up to 33% for sockmap users - Convert TCP send queue handling from tasklet to BH workque - Improve BPF iteration over TCP sockets to see each socket exactly once - Remove obsolete and unused TCP RFC3517/RFC6675 loss recovery code - Support enabling kernel threads for NAPI processing on per-NAPI instance basis rather than a whole device. Fully stop the kernel NAPI thread when threaded NAPI gets disabled. Previously thread would stick around until ifdown due to tricky synchronization - Allow multicast routing to take effect on locally-generated packets - Add output interface argument for End.X in segment routing - MCTP: add support for gateway routing, improve bind() handling - Don't require rtnl_lock when fetching an IPv6 neighbor over Netlink - Add a new neighbor flag ("extern_valid"), which cedes refresh responsibilities to userspace. This is needed for EVPN multi-homing where a neighbor entry for a multi-homed host needs to be synced across all the VTEPs among which the host is multi-homed - Support NUD_PERMANENT for proxy neighbor entries - Add a new queuing discipline for IETF RFC9332 DualQ Coupled AQM - Add sequence numbers to netconsole messages. Unregister netconsole's console when all net targets are removed. Code refactoring. Add a number of selftests - Align IPSec inbound SA lookup to RFC 4301. Only SPI and protocol should be used for an inbound SA lookup - Support inspecting ref_tracker state via DebugFS - Don't force bonding advertisement frames tx to ~333 ms boundaries. Add broadcast_neighbor option to send ARP/ND on all bonded links - Allow providing upcall pid for the 'execute' command in openvswitch - Remove DCCP support from Netfilter's conntrack - Disallow multiple packet duplications in the queuing layer - Prevent use of deprecated iptables code on PREEMPT_RT Driver API: - Support RSS and hashing configuration over ethtool Netlink - Add dedicated ethtool callbacks for getting and setting hashing fields - Add support for power budget evaluation strategy in PSE / Power-over-Ethernet. Generate Netlink events for overcurrent etc - Support DPLL phase offset monitoring across all device inputs. Support providing clock reference and SYNC over separate DPLL inputs - Support traffic classes in devlink rate API for bandwidth management - Remove rtnl_lock dependency from UDP tunnel port configuration Device drivers: - Add a new Broadcom driver for 800G Ethernet (bnge) - Add a standalone driver for Microchip ZL3073x DPLL - Remove IBM's NETIUCV device driver - Ethernet high-speed NICs: - Broadcom (bnxt): - support zero-copy Tx of DMABUF memory - take page size into account for page pool recycling rings - Intel (100G, ice, idpf): - idpf: XDP and AF_XDP support preparations - idpf: add flow steering - add link_down_events statistic - clean up the TSPLL code - preparations for live VM migration - nVidia/Mellanox: - support zero-copy Rx/Tx interfaces (DMABUF and io_uring) - optimize context memory usage for matchers - expose serial numbers in devlink info - support PCIe congestion metrics - Meta (fbnic): - add 25G, 50G, and 100G link modes to phylink - support dumping FW logs - Marvell/Cavium: - support for CN20K generation of the Octeon chips - Amazon: - add HW clock (without timestamping, just hypervisor time access) - Ethernet virtual: - VirtIO net: - support segmentation of UDP-tunnel-encapsulated packets - Google (gve): - support packet timestamping and clock synchronization - Microsoft vNIC: - add handler for device-originated servicing events - allow dynamic MSI-X vector allocation - support Tx bandwidth clamping - Ethernet NICs consumer, and embedded: - AMD: - amd-xgbe: hardware timestamping and PTP clock support - Broadcom integrated MACs (bcmgenet, bcmasp): - use napi_complete_done() return value to support NAPI polling - add support for re-starting auto-negotiation - Broadcom switches (b53): - support BCM5325 switches - add bcm63xx EPHY power control - Synopsys (stmmac): - lots of code refactoring and cleanups - TI: - icssg-prueth: read firmware-names from device tree - icssg: PRP offload support - Microchip: - lan78xx: convert to PHYLINK for improved PHY and MAC management - ksz: add KSZ8463 switch support - Intel: - support similar queue priority scheme in multi-queue and time-sensitive networking (taprio) - support packet pre-emption in both - RealTek (r8169): - enable EEE at 5Gbps on RTL8126 - Airoha: - add PPPoE offload support - MDIO bus controller for Airoha AN7583 - Ethernet PHYs: - support for the IPQ5018 internal GE PHY - micrel KSZ9477 switch-integrated PHYs: - add MDI/MDI-X control support - add RX error counters - add cable test support - add Signal Quality Indicator (SQI) reporting - dp83tg720: improve reset handling and reduce link recovery time - support bcm54811 (and its MII-Lite interface type) - air_en8811h: support resume/suspend - support PHY counters for QCA807x and QCA808x - support WoL for QCA807x - CAN drivers: - rcar_canfd: support for Transceiver Delay Compensation - kvaser: report FW versions via devlink dev info - WiFi: - extended regulatory info support (6 GHz) - add statistics and beacon monitor for Multi-Link Operation (MLO) - support S1G aggregation, improve S1G support - add Radio Measurement action fields - support per-radio RTS threshold - some work around how FIPS affects wifi, which was wrong (RC4 is used by TKIP, not only WEP) - improvements for unsolicited probe response handling - WiFi drivers: - RealTek (rtw88): - IBSS mode for SDIO devices - RealTek (rtw89): - BT coexistence for MLO/WiFi7 - concurrent station + P2P support - support for USB devices RTL8851BU/RTL8852BU - Intel (iwlwifi): - use embedded PNVM in (to be released) FW images to fix compatibility issues - many cleanups (unused FW APIs, PCIe code, WoWLAN) - some FIPS interoperability - MediaTek (mt76): - firmware recovery improvements - more MLO work - Qualcomm/Atheros (ath12k): - fix scan on multi-radio devices - more EHT/Wi-Fi 7 features - encapsulation/decapsulation offload - Broadcom (brcm80211): - support SDIO 43751 device - Bluetooth: - hci_event: add support for handling LE BIG Sync Lost event - ISO: add socket option to report packet seqnum via CMSG - ISO: support SCM_TIMESTAMPING for ISO TS - Bluetooth drivers: - intel_pcie: support Function Level Reset - nxpuart: add support for 4M baudrate - nxpuart: implement powerup sequence, reset, FW dump, and FW loading" * tag 'net-next-6.17' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1742 commits) dpll: zl3073x: Fix build failure selftests: bpf: fix legacy netfilter options ipv6: annotate data-races around rt->fib6_nsiblings ipv6: fix possible infinite loop in fib6_info_uses_dev() ipv6: prevent infinite loop in rt6_nlmsg_size() ipv6: add a retry logic in net6_rt_notify() vrf: Drop existing dst reference in vrf_ip6_input_dst net/sched: taprio: align entry index attr validation with mqprio net: fsl_pq_mdio: use dev_err_probe selftests: rtnetlink.sh: remove esp4_offload after test vsock: remove unnecessary null check in vsock_getname() igb: xsk: solve negative overflow of nb_pkts in zerocopy mode stmmac: xsk: fix negative overflow of budget in zerocopy mode dt-bindings: ieee802154: Convert at86rf230.txt yaml format net: dsa: microchip: Disable PTP function of KSZ8463 net: dsa: microchip: Setup fiber ports for KSZ8463 net: dsa: microchip: Write switch MAC address differently for KSZ8463 net: dsa: microchip: Use different registers for KSZ8463 net: dsa: microchip: Add KSZ8463 switch support to KSZ DSA driver dt-bindings: net: dsa: microchip: Add KSZ8463 switch support ...
2025-07-26Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski
Merge in late fixes to prepare for the 6.17 net-next PR. Conflicts: net/core/neighbour.c 1bbb76a89948 ("neighbour: Fix null-ptr-deref in neigh_flush_dev().") 13a936bb99fb ("neighbour: Protect tbl->phash_buckets[] with a dedicated mutex.") 03dc03fa0432 ("neighbor: Add NTF_EXT_VALIDATED flag for externally validated entries") Adjacent changes: drivers/net/usb/usbnet.c 0d9cfc9b8cb1 ("net: usbnet: Avoid potential RCU stall on LINK_CHANGE event") 2c04d279e857 ("net: usb: Convert tasklet API to new bottom half workqueue mechanism") net/ipv6/route.c 31d7d67ba127 ("ipv6: annotate data-races around rt->fib6_nsiblings") 1caf27297215 ("ipv6: adopt dst_dev() helper") 3b3ccf9ed05e ("net: Remove unnecessary NULL check for lwtunnel_fill_encap()") Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-07-26igb: xsk: solve negative overflow of nb_pkts in zerocopy modeJason Xing
There is no break time in the while() loop, so every time at the end of igb_xmit_zc(), negative overflow of nb_pkts will occur, which renders the return value always false. But theoretically, the result should be set after calling xsk_tx_peek_release_desc_batch(). We can take i40e_xmit_zc() as a good example. Returning false means we're not done with transmission and we need one more poll, which is exactly what igb_xmit_zc() always did before this patch. After this patch, the return value depends on the nb_pkts value. Two cases might happen then: 1. if (nb_pkts < budget), it means we process all the possible data, so return true and no more necessary poll will be triggered because of this. 2. if (nb_pkts == budget), it means we might have more data, so return false to let another poll run again. Fixes: f8e284a02afc ("igb: Add AF_XDP zero-copy Tx support") Signed-off-by: Jason Xing <kernelxing@tencent.com> Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com> Link: https://patch.msgid.link/20250723142327.85187-3-kerneljasonxing@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-07-03igb: convert to ndo_hwtstamp_get() and ndo_hwtstamp_set()Vladimir Oltean
New timestamping API was introduced in commit 66f7223039c0 ("net: add NDOs for configuring hardware timestamping") from kernel v6.6. It is time to convert the Intel igb driver to the new API, so that timestamping configuration can be removed from the ndo_eth_ioctl() path completely. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Simon Horman <horms@kernel.org> Reviewed-by: Vadim Fedorenko <vadim.fedorenko@linux.dev> Reviewed-by: Milena Olech <milena.olech@intel.com> Tested-by: Rinitha S <sx.rinitha@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2025-07-01time/timecounter: Fix the lie that struct cyclecounter is constGreg Kroah-Hartman
In both the read callback for struct cyclecounter, and in struct timecounter, struct cyclecounter is declared as a const pointer. Unfortunatly, a number of users of this pointer treat it as a non-const pointer as it is burried in a larger structure that is heavily modified by the callback function when accessed. This lie had been hidden by the fact that container_of() "casts away" a const attribute of a pointer without any compiler warning happening at all. Fix this all up by removing the const attribute in the needed places so that everyone can see that the structure really isn't const, but can, and is, modified by the users of it. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Link: https://lore.kernel.org/all/2025070124-backyard-hurt-783a@gregkh
2025-06-16eth: igb: migrate to new RXFH callbacksJakub Kicinski
Migrate to new callbacks added by commit 9bb00786fc61 ("net: ethtool: add dedicated callbacks for getting and setting rxfh fields"). Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com> Reviewed-by: Joe Damato <joe@dama.to> Reviewed-by: Tony Nguyen <anthony.l.nguyen@intel.com> Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Link: https://patch.msgid.link/20250614180907.4167714-2-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-06-08treewide, timers: Rename from_timer() to timer_container_of()Ingo Molnar
Move this API to the canonical timer_*() namespace. [ tglx: Redone against pre rc1 ] Signed-off-by: Ingo Molnar <mingo@kernel.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Link: https://lore.kernel.org/all/aB2X0jCKQO56WdMt@gmail.com
2025-04-29igb: Get rid of spurious interruptsKurt Kanzenbach
When running the igc with XDP/ZC in busy polling mode with deferral of hard interrupts, interrupts still happen from time to time. That is caused by the igb task watchdog which triggers Rx interrupts periodically. That mechanism has been introduced to overcome skb/memory allocation failures [1]. So the Rx clean functions stop processing the Rx ring in case of such failure. The task watchdog triggers Rx interrupts periodically in the hope that memory became available in the mean time. The current behavior is undesirable for real time applications, because the driver induced Rx interrupts trigger also the softirq processing. However, all real time packets should be processed by the application which uses the busy polling method. Therefore, only trigger the Rx interrupts in case of real allocation failures. Introduce a new flag for signaling that condition. Follow the same logic as in commit 8dcf2c212078 ("igc: Get rid of spurious interrupts"). [1] - https://git.kernel.org/pub/scm/linux/kernel/git/tglx/history.git/commit/?id=3be507547e6177e5c808544bd6a2efa2c7f1d436 Reviewed-by: Joe Damato <jdamato@fastly.com> Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com> Tested-by: Sweta Kumari <sweta.kumari@intel.com> Signed-off-by: Kurt Kanzenbach <kurt@linutronix.de> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2025-04-29igb: Add support for persistent NAPI configKurt Kanzenbach
Use netif_napi_add_config() to assign persistent per-NAPI config. This is useful for preserving NAPI settings when changing queue counts or for user space programs using SO_INCOMING_NAPI_ID. Reviewed-by: Joe Damato <jdamato@fastly.com> Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com> Tested-by: Rinitha S <sx.rinitha@intel.com> (A Contingent worker at Intel) Signed-off-by: Kurt Kanzenbach <kurt@linutronix.de> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2025-04-29igb: Link queues to NAPI instancesKurt Kanzenbach
Link queues to NAPI instances via netdev-genl API. This is required to use XDP/ZC busy polling. See commit 5ef44b3cb43b ("xsk: Bring back busy polling support") for details. This also allows users to query the info with netlink: |$ ./tools/net/ynl/pyynl/cli.py --spec Documentation/netlink/specs/netdev.yaml \ | --dump queue-get --json='{"ifindex": 2}' |[{'id': 0, 'ifindex': 2, 'napi-id': 8201, 'type': 'rx'}, | {'id': 1, 'ifindex': 2, 'napi-id': 8202, 'type': 'rx'}, | {'id': 2, 'ifindex': 2, 'napi-id': 8203, 'type': 'rx'}, | {'id': 3, 'ifindex': 2, 'napi-id': 8204, 'type': 'rx'}, | {'id': 0, 'ifindex': 2, 'napi-id': 8201, 'type': 'tx'}, | {'id': 1, 'ifindex': 2, 'napi-id': 8202, 'type': 'tx'}, | {'id': 2, 'ifindex': 2, 'napi-id': 8203, 'type': 'tx'}, | {'id': 3, 'ifindex': 2, 'napi-id': 8204, 'type': 'tx'}] Add rtnl locking to PCI error handlers, because netif_queue_set_napi() requires the lock held. While at __igb_open() use RCT coding style. Signed-off-by: Kurt Kanzenbach <kurt@linutronix.de> Reviewed-by: Joe Damato <jdamato@fastly.com> Tested-by: Sweta Kumari <sweta.kumari@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2025-04-29igb: Link IRQs to NAPI instancesKurt Kanzenbach
Link IRQs to NAPI instances via netdev-genl API. This allows users to query that information via netlink: |$ ./tools/net/ynl/pyynl/cli.py --spec Documentation/netlink/specs/netdev.yaml \ | --dump napi-get --json='{"ifindex": 2}' |[{'defer-hard-irqs': 0, | 'gro-flush-timeout': 0, | 'id': 8204, | 'ifindex': 2, | 'irq': 127, | 'irq-suspend-timeout': 0}, | {'defer-hard-irqs': 0, | 'gro-flush-timeout': 0, | 'id': 8203, | 'ifindex': 2, | 'irq': 126, | 'irq-suspend-timeout': 0}, | {'defer-hard-irqs': 0, | 'gro-flush-timeout': 0, | 'id': 8202, | 'ifindex': 2, | 'irq': 125, | 'irq-suspend-timeout': 0}, | {'defer-hard-irqs': 0, | 'gro-flush-timeout': 0, | 'id': 8201, | 'ifindex': 2, | 'irq': 124, | 'irq-suspend-timeout': 0}] |$ cat /proc/interrupts | grep enp2s0 |123: 0 1 IR-PCI-MSIX-0000:02:00.0 0-edge enp2s0 |124: 0 7 IR-PCI-MSIX-0000:02:00.0 1-edge enp2s0-TxRx-0 |125: 0 0 IR-PCI-MSIX-0000:02:00.0 2-edge enp2s0-TxRx-1 |126: 0 5 IR-PCI-MSIX-0000:02:00.0 3-edge enp2s0-TxRx-2 |127: 0 0 IR-PCI-MSIX-0000:02:00.0 4-edge enp2s0-TxRx-3 Reviewed-by: Joe Damato <jdamato@fastly.com> Tested-by: Rinitha S <sx.rinitha@intel.com> (A Contingent worker at Intel) Signed-off-by: Kurt Kanzenbach <kurt@linutronix.de> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2025-04-15net: ptp: introduce .supported_extts_flags to ptp_clock_infoJacob Keller
The PTP_EXTTS_REQUEST(2) ioctl has a flags field which specifies how the external timestamp request should behave. This includes which edge of the signal to timestamp, as well as a specialized "offset" mode. It is expected that more flags will be added in the future. Driver authors routinely do not check the flags, often accepting requests with flags which they do not support. Even drivers which do check flags may not be future-proofed to reject flags not yet defined. Thus, any future flag additions often require manually updating drivers to reject these flags. This approach of hoping we catch flag checks during review, or playing whack-a-mole after the fact is the wrong approach. Introduce the "supported_extts_flags" field to the ptp_clock_info structure. This field defines the set of flags the device actually supports. Update the core character device logic to check this field and reject unsupported requests. Getting this right is somewhat tricky. First, to avoid unnecessary repetition and make basic functionality work when .supported_extts_flags is 0, the core always accepts the PTP_ENABLE_FEATURE flag. This flag is used to set the 'on' parameter to the .enable function and is thus always 'supported' by all drivers. For backwards compatibility, the PTP_RISING_EDGE and PTP_FALLING_EDGE flags are merely "hints" when using the old PTP_EXTTS_REQUEST ioctl, and are not expected to be enforced. If the user issues PTP_EXTTS_REQUEST2, the PTP_STRICT_FLAGS flag is added which is supposed to inform the driver to strictly validate the flags and reject unsupported requests. To handle this, first check if the driver reports PTP_STRICT_FLAGS support. If it does not, then always allow the PTP_RISING_EDGE and PTP_FALLING_EDGE flags. This keeps backwards compatibility with the original PTP_EXTTS_REQUEST ioctl where these flags are not guaranteed to be honored. This way, drivers which do not set the supported_extts_flags will continue to accept requests for the original PTP_EXTTS_REQUEST ioctl. The core will automatically reject requests with new flags, and correctly reject requests with PTP_STRICT_FLAGS, where the driver is supposed to strictly validate the flags. Update the various drivers, refactoring their validation logic into the .supported_extts_flags field. For consistency and readability, PTP_ENABLE_FEATURE is not set in the supported flags list, and PTP_EXTTS_EDGES is expanded to PTP_RISING_EDGE | PTP_FALLING_EDGE in all cases. Note the following driver files set n_ext_ts to a non-zero value but did not check flags at all: • drivers/net/ethernet/freescale/dpaa2/dpaa2-ptp.c • drivers/net/ethernet/freescale/enetc/enetc_ptp.c • drivers/net/ethernet/intel/i40e/i40e_ptp.c • drivers/net/ethernet/marvell/octeontx2/nic/otx2_ptp.c • drivers/net/ethernet/renesas/ravb_ptp.c • drivers/net/ethernet/renesas/rtsn.c • drivers/net/ethernet/renesas/rtsn.h • drivers/net/ethernet/ti/am65-cpts.c • drivers/net/ethernet/ti/cpts.h • drivers/net/ethernet/ti/icssg/icss_iep.c • drivers/net/ethernet/xscale/ptp_ixp46x.c • drivers/net/phy/bcm-phy-ptp.c • drivers/ptp/ptp_ocp.c • drivers/ptp/ptp_pch.c • drivers/ptp/ptp_qoriq.c These drivers behavior does change slightly: they will now reject the PTP_EXTTS_REQUEST2 ioctl, because they do not strictly validate their flags. This also makes them no longer incorrectly accept PTP_EXT_OFFSET. Also note that the renesas ravb driver does not support PTP_STRICT_FLAGS. We could leave the .supported_extts_flags as 0, but I added the PTP_RISING_EDGE | PTP_FALLING_EDGE since the driver previously manually validated these flags. This is equivalent to 0 because the core will allow these flags regardless unless PTP_STRICT_FLAGS is also set. Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Reviewed-by: Kory Maincent <kory.maincent@bootlin.com> Link: https://patch.msgid.link/20250414-jk-supported-perout-flags-v2-1-f6b17d15475c@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-04-05treewide: Switch/rename to timer_delete[_sync]()Thomas Gleixner
timer_delete[_sync]() replaces del_timer[_sync](). Convert the whole tree over and remove the historical wrapper inlines. Conversion was done with coccinelle plus manual fixups where necessary. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Ingo Molnar <mingo@kernel.org>
2025-03-20igb: reject invalid external timestamp requests for 82580-based HWJacob Keller
The igb_ptp_feature_enable_82580 function correctly checks that unknown flags are not passed to the function. However, it does not actually check PTP_RISING_EDGE or PTP_FALLING_EDGE when configuring the external timestamp function. The data sheet for the 82580 product says: Upon a change in the input level of one of the SDP pins that was configured to detect Time stamp events using the TSSDP register, a time stamp of the system time is captured into one of the two auxiliary time stamp registers (AUXSTMPL/H0 or AUXSTMPL/H1). For example to define timestamping of events in the AUXSTMPL0 and AUXSTMPH0 registers, Software should: 1. Set the TSSDP.AUX0_SDP_SEL field to select the SDP pin that detects the level change and set the TSSDP.AUX0_TS_SDP_EN bit to 1. 2. Set the TSAUXC.EN_TS0 bit to 1 to enable timestamping The same paragraph is in the i350 and i354 data sheets. The wording implies that the time stamps are captured at any level change. There does not appear to be any way to only timestamp one edge of the signal. Reject requests which do not set both PTP_RISING_EDGE and PTP_FALLING_EDGE when operating under PTP_STRICT_FLAGS mode via PTP_EXTTS_REQUEST2. Fixes: 38970eac41db ("igb: support EXTTS on 82580/i354/i350") Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com> Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://patch.msgid.link/20250312-jk-net-fixes-supported-extts-flags-v2-1-ea930ba82459@intel.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-01-07igb: Fix passing 0 to ERR_PTR in igb_run_xdp()Yue Haibing
igb_run_xdp() converts customed xdp action to a negative error code with the sk_buff pointer type which be checked with IS_ERR in igb_clean_rx_irq(). Remove this error pointer handing instead use plain int return value. Reviewed-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com> Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Signed-off-by: Yue Haibing <yuehaibing@huawei.com> Reviewed-by: Simon Horman <horms@kernel.org> Tested-by: Chandan Kumar Rout <chandanx.rout@intel.com> (A Contingent Worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Link: https://patch.msgid.link/20250106221929.956999-10-anthony.l.nguyen@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-01-07igb: Add AF_XDP zero-copy Tx supportSriram Yagnaraman
Add support for AF_XDP zero-copy transmit path. A new TX buffer type IGB_TYPE_XSK is introduced to indicate that the Tx frame was allocated from the xsk buff pool, so igb_clean_tx_ring() and igb_clean_tx_irq() can clean the buffers correctly based on type. igb_xmit_zc() performs the actual packet transmit when AF_XDP zero-copy is enabled. We share the TX ring between slow path, XDP and AF_XDP zero-copy, so we use the netdev queue lock to ensure mutual exclusion. Signed-off-by: Sriram Yagnaraman <sriram.yagnaraman@est.tech> [Kurt: Set olinfo_status in igb_xmit_zc() so that frames are transmitted, Use READ_ONCE() for xsk_pool and check Tx disabled and carrier in igb_xmit_zc(), Add FIXME for RS bit] Signed-off-by: Kurt Kanzenbach <kurt@linutronix.de> Reviewed-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com> Tested-by: George Kuruvinakunnel <george.kuruvinakunnel@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Link: https://patch.msgid.link/20250106221929.956999-7-anthony.l.nguyen@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-01-07igb: Add AF_XDP zero-copy Rx supportSriram Yagnaraman
Add support for AF_XDP zero-copy receive path. When AF_XDP zero-copy is enabled, the rx buffers are allocated from the xsk buff pool using igb_alloc_rx_buffers_zc(). Use xsk_pool_get_rx_frame_size() to set SRRCTL rx buf size when zero-copy is enabled. Signed-off-by: Sriram Yagnaraman <sriram.yagnaraman@est.tech> [Kurt: Port to v6.12 and provide napi_id for xdp_rxq_info_reg(), RCT, remove NETDEV_XDP_ACT_XSK_ZEROCOPY, update NTC handling, READ_ONCE() xsk_pool, likelyfy for XDP_REDIRECT case] Signed-off-by: Kurt Kanzenbach <kurt@linutronix.de> Acked-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com> Tested-by: George Kuruvinakunnel <george.kuruvinakunnel@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Link: https://patch.msgid.link/20250106221929.956999-6-anthony.l.nguyen@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-01-07igb: Add XDP finalize and stats update functionsKurt Kanzenbach
Move XDP finalize and Rx statistics update into separate functions. This way, they can be reused by the XDP and XDP/ZC code later. Signed-off-by: Kurt Kanzenbach <kurt@linutronix.de> Acked-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com> Tested-by: George Kuruvinakunnel <george.kuruvinakunnel@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Link: https://patch.msgid.link/20250106221929.956999-5-anthony.l.nguyen@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-01-07igb: Introduce XSK data structures and helpersSriram Yagnaraman
Add the following ring flag: - IGB_RING_FLAG_TX_DISABLED (when xsk pool is being setup) Add a xdp_buff array for use with XSK receive batch API, and a pointer to xsk_pool in igb_adapter. Add enable/disable functions for TX and RX rings. Add enable/disable functions for XSK pool. Add xsk wakeup function. None of the above functionality will be active until NETDEV_XDP_ACT_XSK_ZEROCOPY is advertised in netdev->xdp_features. Signed-off-by: Sriram Yagnaraman <sriram.yagnaraman@est.tech> [Kurt: Add READ/WRITE_ONCE(), synchronize_net(), remove IGB_RING_FLAG_AF_XDP_ZC] Signed-off-by: Kurt Kanzenbach <kurt@linutronix.de> Reviewed-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com> Tested-by: George Kuruvinakunnel <george.kuruvinakunnel@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Link: https://patch.msgid.link/20250106221929.956999-4-anthony.l.nguyen@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-01-07igb: Introduce igb_xdp_is_enabled()Sriram Yagnaraman
Introduce igb_xdp_is_enabled() to check if an XDP program is assigned to the device. Use that wherever xdp_prog is read and evaluated. Signed-off-by: Sriram Yagnaraman <sriram.yagnaraman@est.tech> [Kurt: Split patches and use READ_ONCE()] Signed-off-by: Kurt Kanzenbach <kurt@linutronix.de> Acked-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com> Tested-by: George Kuruvinakunnel <george.kuruvinakunnel@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Link: https://patch.msgid.link/20250106221929.956999-3-anthony.l.nguyen@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-01-07igb: Remove static qualifiersSriram Yagnaraman
Remove static qualifiers on the following functions to be able to call from XSK specific file that is added in the later patches: - igb_xdp_tx_queue_mapping() - igb_xdp_ring_update_tail() - igb_clean_tx_ring() - igb_clean_rx_ring() - igb_xdp_xmit_back() - igb_process_skb_fields() While at it, inline igb_xdp_tx_queue_mapping() and igb_xdp_ring_update_tail(). These functions are small enough and used in XDP hot paths. Signed-off-by: Sriram Yagnaraman <sriram.yagnaraman@est.tech> [Kurt: Split patches, inline small XDP functions] Signed-off-by: Kurt Kanzenbach <kurt@linutronix.de> Acked-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com> Tested-by: George Kuruvinakunnel <george.kuruvinakunnel@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Link: https://patch.msgid.link/20250106221929.956999-2-anthony.l.nguyen@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-12-03igb: Fix potential invalid memory access in igb_init_module()Yuan Can
The pci_register_driver() can fail and when this happened, the dca_notifier needs to be unregistered, otherwise the dca_notifier can be called when igb fails to install, resulting to invalid memory access. Fixes: bbd98fe48a43 ("igb: Fix DCA errors and do not use context index for 82576") Signed-off-by: Yuan Can <yuancan@huawei.com> Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2024-11-15Merge branch '100GbE' of ↵Jakub Kicinski
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue Tony Nguyen says: ==================== Intel Wired LAN Driver Updates 2024-11-05 (ice, ixgbe, igc. igb, igbvf, e1000) For ice: Mateusz refactors and adds additional SerDes configuration values to be output. Przemek refactors processing of DDP and adds support for a flag field in the DDP's signature segment header. Joe Damato adds support for persistent NAPI config. Brett adjusts setting of Tx promiscuous based on unicast/multicast setting. Jake moves setting of pf->supported_rxdids to occur directly after DDP load and changes a small struct to use stack memory. Frederic Weisbecker adds WQ_UNBOUND flag to the workqueue. For ixgbe: Diomidis Spinellis removes a circular dependency. For igc: Vitaly removes an unneeded autoneg parameter. For igb: Johnny Park fixes a couple of typos. For igbvf: Wander Lairson Costa removes an unused spinlock. For e1000: Joe Damato adds RTNL lock to some calls where it is expected to be held. * '100GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue: e1000: Hold RTNL when e1000_down can be called igbvf: remove unused spinlock igb: Fix 2 typos in comments in igb_main.c igc: remove autoneg parameter from igc_mac_info ixgbe: Break include dependency cycle ice: Unbind the workqueue ice: use stack variable for virtchnl_supported_rxdids ice: initialize pf->supported_rxdids immediately after loading DDP ice: only allow Tx promiscuous for multicast ice: Add support for persistent NAPI config ice: support optional flags in signature segment header ice: refactor "last" segment of DDP pkg ice: extend dump serdes equalizer values feature ice: rework of dump serdes equalizer values feature ==================== Link: https://patch.msgid.link/20241113185431.1289708-1-anthony.l.nguyen@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-11-15ndo_fdb_add: Add a parameter to report whether notification was sentPetr Machata
Currently when FDB entries are added to or deleted from a VXLAN netdevice, the VXLAN driver emits one notification, including the VXLAN-specific attributes. The core however always sends a notification as well, a generic one. Thus two notifications are unnecessarily sent for these operations. A similar situation comes up with bridge driver, which also emits notifications on its own: # ip link add name vx type vxlan id 1000 dstport 4789 # bridge monitor fdb & [1] 1981693 # bridge fdb add de:ad:be:ef:13:37 dev vx self dst 192.0.2.1 de:ad:be:ef:13:37 dev vx dst 192.0.2.1 self permanent de:ad:be:ef:13:37 dev vx self permanent In order to prevent this duplicity, add a paremeter to ndo_fdb_add, bool *notified. The flag is primed to false, and if the callee sends a notification on its own, it sets it to true, thus informing the core that it should not generate another notification. Signed-off-by: Petr Machata <petrm@nvidia.com> Reviewed-by: Amit Cohen <amcohen@nvidia.com> Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org> Link: https://patch.msgid.link/cbf6ae8195e85cbf922f8058ce4eba770f3b71ed.1731589511.git.petrm@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-11-14Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski
Cross-merge networking fixes after downstream PR (net-6.12-rc8). Conflicts: tools/testing/selftests/net/.gitignore 252e01e68241 ("selftests: net: add netlink-dumps to .gitignore") be43a6b23829 ("selftests: ncdevmem: Move ncdevmem under drivers/net/hw") https://lore.kernel.org/all/20241113122359.1b95180a@canb.auug.org.au/ drivers/net/phy/phylink.c 671154f174e0 ("net: phylink: ensure PHY momentary link-fails are handled") 7530ea26c810 ("net: phylink: remove "using_mac_select_pcs"") Adjacent changes: drivers/net/ethernet/stmicro/stmmac/dwmac-intel-plat.c 5b366eae7193 ("stmmac: dwmac-intel-plat: fix call balance of tx_clk handling routines") e96321fad3ad ("net: ethernet: Switch back to struct platform_driver::remove()") Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-11-13igb: Fix 2 typos in comments in igb_main.cJohnny Park
Fix 2 spelling mistakes in comments in `igb_main.c`. Signed-off-by: Johnny Park <pjohnny0508@gmail.com> Acked-by: Przemek Kitszel <przemyslaw.kitszel@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2024-11-12Revert "igb: Disable threaded IRQ for igb_msix_other"Wander Lairson Costa
This reverts commit 338c4d3902feb5be49bfda530a72c7ab860e2c9f. Sebastian noticed the ISR indirectly acquires spin_locks, which are sleeping locks under PREEMPT_RT, which leads to kernel splats. Fixes: 338c4d3902feb ("igb: Disable threaded IRQ for igb_msix_other") Reported-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Wander Lairson Costa <wander@redhat.com> Reviewed-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Acked-by: Przemek Kitszel <przemyslaw.kitszel@intel.com> Link: https://patch.msgid.link/20241106111427.7272-1-wander@redhat.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-10-31Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski
Cross-merge networking fixes after downstream PR (net-6.12-rc6). Conflicts: drivers/net/wireless/intel/iwlwifi/mvm/mld-mac80211.c cbe84e9ad5e2 ("wifi: iwlwifi: mvm: really send iwl_txpower_constraints_cmd") 188a1bf89432 ("wifi: mac80211: re-order assigning channel in activate links") https://lore.kernel.org/all/20241028123621.7bbb131b@canb.auug.org.au/ net/mac80211/cfg.c c4382d5ca1af ("wifi: mac80211: update the right link for tx power") 8dd0498983ee ("wifi: mac80211: Fix setting txpower with emulate_chanctx") drivers/net/ethernet/intel/ice/ice_ptp_hw.h 6e58c3310622 ("ice: fix crash on probe for DPLL enabled E810 LOM") e4291b64e118 ("ice: Align E810T GPIO to other products") ebb2693f8fbd ("ice: Read SDP section from NVM for pin definitions") ac532f4f4251 ("ice: Cleanup unused declarations") https://lore.kernel.org/all/20241030120524.1ee1af18@canb.auug.org.au/ No adjacent changes. Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-10-29igb: Disable threaded IRQ for igb_msix_otherWander Lairson Costa
During testing of SR-IOV, Red Hat QE encountered an issue where the ip link up command intermittently fails for the igbvf interfaces when using the PREEMPT_RT variant. Investigation revealed that e1000_write_posted_mbx returns an error due to the lack of an ACK from e1000_poll_for_ack. The underlying issue arises from the fact that IRQs are threaded by default under PREEMPT_RT. While the exact hardware details are not available, it appears that the IRQ handled by igb_msix_other must be processed before e1000_poll_for_ack times out. However, e1000_write_posted_mbx is called with preemption disabled, leading to a scenario where the IRQ is serviced only after the failure of e1000_write_posted_mbx. To resolve this, we set IRQF_NO_THREAD for the affected interrupt, ensuring that the kernel handles it immediately, thereby preventing the aforementioned error. Reproducer: #!/bin/bash # echo 2 > /sys/class/net/ens14f0/device/sriov_numvfs ipaddr_vlan=3 nic_test=ens14f0 vf=${nic_test}v0 while true; do ip link set ${nic_test} mtu 1500 ip link set ${vf} mtu 1500 ip link set $vf up ip link set ${nic_test} vf 0 vlan ${ipaddr_vlan} ip addr add 172.30.${ipaddr_vlan}.1/24 dev ${vf} ip addr add 2021:db8:${ipaddr_vlan}::1/64 dev ${vf} if ! ip link show $vf | grep 'state UP'; then echo 'Error found' break fi ip link set $vf down done Signed-off-by: Wander Lairson Costa <wander@redhat.com> Fixes: 9d5c824399de ("igb: PCI-Express 82575 Gigabit Ethernet driver") Reported-by: Yuying Ma <yuma@redhat.com> Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com> Tested-by: Rafal Romanowski <rafal.romanowski@intel.com> Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2024-10-10Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski
Cross-merge networking fixes after downstream PR (net-6.12-rc3). No conflicts and no adjacent changes. Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-10-08igb: Cleanup unused declarationsYue Haibing
e1000_init_function_pointers_82575() is never implemented and used since commit 9d5c824399de ("igb: PCI-Express 82575 Gigabit Ethernet driver"). And commit 9835fd7321a6 ("igb: Add new function to read part number from EEPROM in string format") removed igb_read_part_num() implementation. Signed-off-by: Yue Haibing <yuehaibing@huawei.com> Reviewed-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2024-10-08igb: Do not bring the device up after non-fatal errorMohamed Khalfella
Commit 004d25060c78 ("igb: Fix igb_down hung on surprise removal") changed igb_io_error_detected() to ignore non-fatal pcie errors in order to avoid hung task that can happen when igb_down() is called multiple times. This caused an issue when processing transient non-fatal errors. igb_io_resume(), which is called after igb_io_error_detected(), assumes that device is brought down by igb_io_error_detected() if the interface is up. This resulted in panic with stacktrace below. [ T3256] igb 0000:09:00.0 haeth0: igb: haeth0 NIC Link is Down [ T292] pcieport 0000:00:1c.5: AER: Uncorrected (Non-Fatal) error received: 0000:09:00.0 [ T292] igb 0000:09:00.0: PCIe Bus Error: severity=Uncorrected (Non-Fatal), type=Transaction Layer, (Requester ID) [ T292] igb 0000:09:00.0: device [8086:1537] error status/mask=00004000/00000000 [ T292] igb 0000:09:00.0: [14] CmpltTO [ 200.105524,009][ T292] igb 0000:09:00.0: AER: TLP Header: 00000000 00000000 00000000 00000000 [ T292] pcieport 0000:00:1c.5: AER: broadcast error_detected message [ T292] igb 0000:09:00.0: Non-correctable non-fatal error reported. [ T292] pcieport 0000:00:1c.5: AER: broadcast mmio_enabled message [ T292] pcieport 0000:00:1c.5: AER: broadcast resume message [ T292] ------------[ cut here ]------------ [ T292] kernel BUG at net/core/dev.c:6539! [ T292] invalid opcode: 0000 [#1] PREEMPT SMP [ T292] RIP: 0010:napi_enable+0x37/0x40 [ T292] Call Trace: [ T292] <TASK> [ T292] ? die+0x33/0x90 [ T292] ? do_trap+0xdc/0x110 [ T292] ? napi_enable+0x37/0x40 [ T292] ? do_error_trap+0x70/0xb0 [ T292] ? napi_enable+0x37/0x40 [ T292] ? napi_enable+0x37/0x40 [ T292] ? exc_invalid_op+0x4e/0x70 [ T292] ? napi_enable+0x37/0x40 [ T292] ? asm_exc_invalid_op+0x16/0x20 [ T292] ? napi_enable+0x37/0x40 [ T292] igb_up+0x41/0x150 [ T292] igb_io_resume+0x25/0x70 [ T292] report_resume+0x54/0x70 [ T292] ? report_frozen_detected+0x20/0x20 [ T292] pci_walk_bus+0x6c/0x90 [ T292] ? aer_print_port_info+0xa0/0xa0 [ T292] pcie_do_recovery+0x22f/0x380 [ T292] aer_process_err_devices+0x110/0x160 [ T292] aer_isr+0x1c1/0x1e0 [ T292] ? disable_irq_nosync+0x10/0x10 [ T292] irq_thread_fn+0x1a/0x60 [ T292] irq_thread+0xe3/0x1a0 [ T292] ? irq_set_affinity_notifier+0x120/0x120 [ T292] ? irq_affinity_notify+0x100/0x100 [ T292] kthread+0xe2/0x110 [ T292] ? kthread_complete_and_exit+0x20/0x20 [ T292] ret_from_fork+0x2d/0x50 [ T292] ? kthread_complete_and_exit+0x20/0x20 [ T292] ret_from_fork_asm+0x11/0x20 [ T292] </TASK> To fix this issue igb_io_resume() checks if the interface is running and the device is not down this means igb_io_error_detected() did not bring the device down and there is no need to bring it up. Signed-off-by: Mohamed Khalfella <mkhalfella@purestorage.com> Reviewed-by: Yuanyuan Zhong <yzhong@purestorage.com> Fixes: 004d25060c78 ("igb: Fix igb_down hung on surprise removal") Reviewed-by: Simon Horman <horms@kernel.org> Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2024-09-12Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski
Cross-merge networking fixes after downstream PR. No conflicts (sort of) and no adjacent changes. This merge reverts commit b3c9e65eb227 ("net: hsr: remove seqnr_lock") from net, as it was superseded by commit 430d67bdcb04 ("net: hsr: Use the seqnr lock for frames received via interlink port.") in net-next. Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-09-09igb: Always call igb_xdp_ring_update_tail() under Tx lockSriram Yagnaraman
Always call igb_xdp_ring_update_tail() under __netif_tx_lock, add a comment and lockdep assert to indicate that. This is needed to share the same TX ring between XDP, XSK and slow paths. Furthermore, the current XDP implementation is racy on tail updates. Fixes: 9cbc948b5a20 ("igb: add XDP support") Signed-off-by: Sriram Yagnaraman <sriram.yagnaraman@est.tech> [Kurt: Add lockdep assert and fixes tag] Signed-off-by: Kurt Kanzenbach <kurt@linutronix.de> Acked-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com> Tested-by: George Kuruvinakunnel <george.kuruvinakunnel@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2024-09-06igb: Remove setting of RX software timestampGal Pressman
The responsibility for reporting of RX software timestamp has moved to the core layer (see __ethtool_get_ts_info()), remove usage from the device drivers. Reviewed-by: Carolina Jubran <cjubran@nvidia.com> Reviewed-by: Rahul Rameshbabu <rrameshbabu@nvidia.com> Signed-off-by: Gal Pressman <gal@nvidia.com> Reviewed-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-08-28igb: Fix not clearing TimeSync interrupts for 82580Daiwei Li
82580 NICs have a hardware bug that makes it necessary to write into the TSICR (TimeSync Interrupt Cause) register to clear it: https://lore.kernel.org/all/CDCB8BE0.1EC2C%25matthew.vick@intel.com/ Add a conditional so only for 82580 we write into the TSICR register, so we don't risk losing events for other models. Without this change, when running ptp4l with an Intel 82580 card, I get the following output: > timed out while polling for tx timestamp increasing tx_timestamp_timeout or > increasing kworker priority may correct this issue, but a driver bug likely > causes it This goes away with this change. This (partially) reverts commit ee14cc9ea19b ("igb: Fix missing time sync events"). Fixes: ee14cc9ea19b ("igb: Fix missing time sync events") Closes: https://lore.kernel.org/intel-wired-lan/CAN0jFd1kO0MMtOh8N2Ztxn6f7vvDKp2h507sMryobkBKe=xk=w@mail.gmail.com/ Tested-by: Daiwei Li <daiweili@google.com> Suggested-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by: Daiwei Li <daiweili@google.com> Acked-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Reviewed-by: Kurt Kanzenbach <kurt@linutronix.de> Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2024-08-20igb: cope with large MAX_SKB_FRAGSPaolo Abeni
Sabrina reports that the igb driver does not cope well with large MAX_SKB_FRAG values: setting MAX_SKB_FRAG to 45 causes payload corruption on TX. An easy reproducer is to run ssh to connect to the machine. With MAX_SKB_FRAGS=17 it works, with MAX_SKB_FRAGS=45 it fails. This has been reported originally in https://bugzilla.redhat.com/show_bug.cgi?id=2265320 The root cause of the issue is that the driver does not take into account properly the (possibly large) shared info size when selecting the ring layout, and will try to fit two packets inside the same 4K page even when the 1st fraglist will trump over the 2nd head. Address the issue by checking if 2K buffers are insufficient. Fixes: 3948b05950fd ("net: introduce a config option to tweak MAX_SKB_FRAGS") Reported-by: Jan Tluka <jtluka@redhat.com> Reported-by: Jirka Hladky <jhladky@redhat.com> Reported-by: Sabrina Dubroca <sd@queasysnail.net> Tested-by: Sabrina Dubroca <sd@queasysnail.net> Tested-by: Corinna Vinschen <vinschen@redhat.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Corinna Vinschen <vinschen@redhat.com> Link: https://patch.msgid.link/20240816152034.1453285-1-vinschen@redhat.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-07-15Merge branch 'net-make-timestamping-selectable'Jakub Kicinski
First part of "net: Make timestamping selectable" from Kory Maincent. Change the driver-facing type already to lower rebasing pain. Link: https://lore.kernel.org/20240709-feature_ptp_netnext-v17-0-b5317f50df2a@bootlin.com/ Signed-off-by: Jakub Kicinski <kuba@kernel.org>
generated by cgit v1.2.3 (git 2.46.0) at 2025-12-10 10:13:59 +0000