summaryrefslogtreecommitdiff
path: root/drivers/net/ethernet/qlogic
AgeCommit message (Collapse)Author
2025-11-20devlink: pass extack through to devlink_param::get()Daniel Zahka
Allow devlink_param::get() handlers to report error messages via extack. This function is called in a few different contexts, but not all of them will have an valid extack to use. When devlink_param::get() is called from param_get_doit or param_get_dumpit contexts, pass the extack through so that drivers can report errors when retrieving param values. devlink_param::get() is called from the context of devlink_param_notify(), pass NULL in for the extack. Reviewed-by: Saeed Mahameed <saeedm@nvidia.com> Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com> Signed-off-by: Daniel Zahka <daniel.zahka@gmail.com> Link: https://patch.msgid.link/20251119025038.651131-2-daniel.zahka@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-11-20Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski
Cross-merge networking fixes after downstream PR (net-6.18-rc7). No conflicts, adjacent changes: tools/testing/selftests/net/af_unix/Makefile e1bb28bf13f4 ("selftest: af_unix: Add test for SO_PEEK_OFF.") 45a1cd8346ca ("selftests: af_unix: Add tests for ECONNRESET and EOF semantics") Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-11-18net: qlogic/qede: fix potential out-of-bounds read in qede_tpa_cont() and ↵Pavel Zhigulin
qede_tpa_end() The loops in 'qede_tpa_cont()' and 'qede_tpa_end()', iterate over 'cqe->len_list[]' using only a zero-length terminator as the stopping condition. If the terminator was missing or malformed, the loop could run past the end of the fixed-size array. Add an explicit bound check using ARRAY_SIZE() in both loops to prevent a potential out-of-bounds access. Found by Linux Verification Center (linuxtesting.org) with SVACE. Fixes: 55482edc25f0 ("qede: Add slowpath/fastpath support and enable hardware GRO") Signed-off-by: Pavel Zhigulin <Pavel.Zhigulin@kaspersky.com> Link: https://patch.msgid.link/20251113112757.4166625-1-Pavel.Zhigulin@kaspersky.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-11-17qede: convert to use ndo_hwtstamp callbacksVadim Fedorenko
The driver implemented SIOCSHWTSTAMP ioctl cmd only, but it stores configuration in private structure, so it can be reported back to users. Implement both ndo_hwtstamp_set and ndo_hwtstamp_set callbacks. ndo_hwtstamp_set implements a check of unsupported 1-step timestamping and qede_ptp_cfg_filters() becomes void as it cannot fail anymore. Reviewed-by: Kory Maincent <kory.maincent@bootlin.com> Signed-off-by: Vadim Fedorenko <vadim.fedorenko@linux.dev> Link: https://patch.msgid.link/20251116094610.3932005-3-vadim.fedorenko@linux.dev Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-10-06Merge tag 'pci-v6.18-changes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci Pull pci updates from Bjorn Helgaas: "Enumeration: - Add PCI_FIND_NEXT_CAP() and PCI_FIND_NEXT_EXT_CAP() macros that take config space accessor functions. Implement pci_find_capability(), pci_find_ext_capability(), and dwc, dwc endpoint, and cadence capability search interfaces with them (Hans Zhang) - Leave parent unit address 0 in 'interrupt-map' so that when we build devicetree nodes to describe PCI functions that contain multiple peripherals, we can build this property even when interrupt controllers lack 'reg' properties (Lorenzo Pieralisi) - Add a Xeon 6 quirk to disable Extended Tags and limit Max Read Request Size to 128B to avoid a performance issue (Ilpo Järvinen) - Add sysfs 'serial_number' file to expose the Device Serial Number (Matthew Wood) - Fix pci_acpi_preserve_config() memory leak (Nirmoy Das) Resource management: - Align m68k pcibios_enable_device() with other arches (Ilpo Järvinen) - Remove sparc pcibios_enable_device() implementations that don't do anything beyond what pci_enable_resources() does (Ilpo Järvinen) - Remove mips pcibios_enable_resources() and use pci_enable_resources() instead (Ilpo Järvinen) - Clean up bridge window sizing and assignment (Ilpo Järvinen), including: - Leave non-claimed bridge windows disabled - Enable bridges even if a window wasn't assigned because not all windows are required by downstream devices - Preserve bridge window type when releasing the resource, since the type is needed for reassignment - Consolidate selection of bridge windows into two new interfaces, pbus_select_window() and pbus_select_window_for_type(), so this is done consistently - Compute bridge window start and end earlier to avoid logging stale information MSI: - Add quirk to disable MSI on RDC PCI to PCIe bridges (Marcos Del Sol Vives) Error handling: - Align AER with EEH by allowing drivers to request a Bus Reset on Non-Fatal Errors (in addition to the reset on Fatal Errors that we already do) (Lukas Wunner) - If error recovery fails, emit FAILED_RECOVERY uevents for the devices, not for the bridge leading to them. This makes them correspond to BEGIN_RECOVERY uevents (Lukas Wunner) - Align AER with EEH by calling err_handler.error_detected() callbacks to notify drivers if error recovery fails (Lukas Wunner) - Align AER with EEH by restoring device error_state to pci_channel_io_normal before the err_handler.slot_reset() callback. This is earlier than before the err_handler.resume() callback (Lukas Wunner) - Emit a BEGIN_RECOVERY uevent when driver's err_handler.error_detected() requests a reset, as well as when it says recovery is complete or can be done without a reset (Niklas Schnelle) - Align s390 with AER and EEH by emitting uevents during error recovery (Niklas Schnelle) - Align EEH with AER and s390 by emitting BEGIN_RECOVERY, SUCCESSFUL_RECOVERY, or FAILED_RECOVERY uevents depending on the result of err_handler.error_detected() (Niklas Schnelle) - Fix a NULL pointer dereference in aer_ratelimit() when ACPI GHES error information identifies a device without an AER Capability (Breno Leitao) - Update error decoding and TLP Log printing for new errors in current PCIe base spec (Lukas Wunner) - Update error recovery documentation to match the current code and use consistent nomenclature (Lukas Wunner) ASPM: - Enable all ClockPM and ASPM states for devicetree platforms, since there's typically no firmware that enables ASPM This is a risky change that may uncover hardware or configuration defects at boot-time rather than when users enable ASPM via sysfs later. Booting with "pcie_aspm=off" prevents this enabling (Manivannan Sadhasivam) - Remove the qcom code that enabled ASPM (Manivannan Sadhasivam) Power management: - If a device has already been disconnected, e.g., by a hotplug removal, don't bother trying to resume it to D0 when detaching the driver. This avoids annoying "Unable to change power state from D3cold to D0" messages (Mario Limonciello) - Ensure devices are powered up before config reads for 'max_link_width', 'current_link_speed', 'current_link_width', 'secondary_bus_number', and 'subordinate_bus_number' sysfs files. This prevents using invalid data (~0) in drivers or lspci and, depending on how the PCIe controller reports errors, may avoid error interrupts or crashes (Brian Norris) Virtualization: - Add rescan/remove locking when enabling/disabling SR-IOV, which avoids list corruption on s390, where disabling SR-IOV also generates hotplug events (Niklas Schnelle) Peer-to-peer DMA: - Free struct p2p_pgmap, not a member within it, in the pci_p2pdma_add_resource() error path (Sungho Kim) Endpoint framework: - Document sysfs interface for BAR assignment of vNTB endpoint functions (Jerome Brunet) - Fix array underflow in endpoint BAR test case (Dan Carpenter) - Skip endpoint IRQ test if the IRQ is out of range to avoid false errors (Christian Bruel) - Fix endpoint test case for controllers with fixed-size BARs smaller than requested by the test (Marek Vasut) - Restore inbound translation when disabling doorbell so the endpoint doorbell test case can be run more than once (Niklas Cassel) - Avoid a NULL pointer dereference when releasing DMA channels in endpoint DMA test case (Shin'ichiro Kawasaki) - Convert tegra194 interrupt number to MSI vector to fix endpoint Kselftest MSI_TEST test case (Niklas Cassel) - Reset tegra194 BARs when running in endpoint mode so the BAR tests don't overwrite the ATU settings in BAR4 (Niklas Cassel) - Handle errors in tegra194 BPMP transactions so we don't mistakenly skip future PERST# assertion (Vidya Sagar) AMD MDB PCIe controller driver: - Update DT binding example to separate PERST# to a Root Port stanza to make multiple Root Ports possible in the future (Sai Krishna Musham) - Add driver support for PERST# being described in a Root Port stanza, falling back to the host bridge if not found there (Sai Krishna Musham) Freescale i.MX6 PCIe controller driver: - Enable the 3.3V Vaux supply if available so devices can request wakeup with either Beacon or WAKE# (Richard Zhu) MediaTek PCIe Gen3 controller driver: - Add optional sys clock ready time setting to avoid sys_clk_rdy signal glitching in MT6991 and MT8196 (AngeloGioacchino Del Regno) - Add DT binding and driver support for MT6991 and MT8196 (AngeloGioacchino Del Regno) NVIDIA Tegra PCIe controller driver: - When asserting PERST#, disable the controller instead of mistakenly disabling the PLL twice (Nagarjuna Kristam) - Convert struct tegra_msi mask_lock to raw spinlock to avoid a lock nesting error (Marek Vasut) Qualcomm PCIe controller driver: - Select PCI Power Control Slot driver so slot voltage rails can be turned on/off if described in Root Port devicetree node (Qiang Yu) - Parse only PCI bridge child nodes in devicetree, skipping unrelated nodes such as OPP (Operating Performance Points), which caused probe failures (Krishna Chaitanya Chundru) - Add 8.0 GT/s and 32.0 GT/s equalization settings (Ziyue Zhang) - Consolidate Root Port 'phy' and 'reset' properties in struct qcom_pcie_port, regardless of whether we got them from the Root Port node or the host bridge node (Manivannan Sadhasivam) - Fetch and map the ELBI register space in the DWC core rather than in each driver individually (Krishna Chaitanya Chundru) - Enable ECAM mechanism in DWC core by setting up iATU with 'CFG Shift Feature' and use this in the qcom driver (Krishna Chaitanya Chundru) - Add SM8750 compatible to qcom,pcie-sm8550.yaml (Krishna Chaitanya Chundru) - Update qcom,pcie-x1e80100.yaml to allow fifth PCIe host on Qualcomm Glymur, which is compatible with X1E80100 but doesn't have the cnoc_sf_axi clock (Qiang Yu) Renesas R-Car PCIe controller driver: - Fix a typo that prevented correct PHY initialization (Marek Vasut) - Add a missing 1ms delay after PWR reset assertion as required by the V4H manual (Marek Vasut) - Assure reset has completed before DBI access to avoid SError (Marek Vasut) - Fix inverted PHY initialization check, which sometimes led to timeouts and failure to start the controller (Marek Vasut) - Pass the correct IRQ domain to generic_handle_domain_irq() to fix a regression when converting to msi_create_parent_irq_domain() (Claudiu Beznea) - Drop the spinlock protecting the PMSR register - it's no longer required since pci_lock already serializes accesses (Marek Vasut) - Convert struct rcar_msi mask_lock to raw spinlock to avoid a lock nesting error (Marek Vasut) SOPHGO PCIe controller driver: - Check for existence of struct cdns_pcie.ops before using it to allow Cadence drivers that don't need to supply ops (Chen Wang) - Add DT binding and driver for the SOPHGO SG2042 PCIe controller (Chen Wang) STMicroelectronics STM32MP25 PCIe controller driver: - Update pinctrl documentation of initial states and use in runtime suspend/resume (Christian Bruel) - Add pinctrl_pm_select_init_state() for use by stm32 driver, which needs it during resume (Christian Bruel) - Add devicetree bindings and drivers for the STMicroelectronics STM32MP25 in host and endpoint modes (Christian Bruel) Synopsys DesignWare PCIe controller driver: - Add support for x16 in devicetree 'num-lanes' property (Konrad Dybcio) - Verify that if DT specifies a single IRQ for all eDMA channels, it is named 'dma' (Niklas Cassel) TI J721E PCIe driver: - Add MODULE_DEVICE_TABLE() so driver can be autoloaded (Siddharth Vadapalli) - Power controller off before configuring the glue layer so the controller latches the correct values on power-on (Siddharth Vadapalli) TI Keystone PCIe controller driver: - Use devm_request_irq() so 'ks-pcie-error-irq' is freed when driver exits with error (Siddharth Vadapalli) - Add Peripheral Virtualization Unit (PVU), which restricts DMA from PCIe devices to specific regions of host memory, to the ti,am65 binding (Jan Kiszka) Xilinx NWL PCIe controller driver: - Clear bootloader E_ECAM_CONTROL before merging in the new driver value to avoid writing invalid values (Jani Nurminen)" * tag 'pci-v6.18-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci: (141 commits) PCI/AER: Avoid NULL pointer dereference in aer_ratelimit() MAINTAINERS: Add entry for ST STM32MP25 PCIe drivers PCI: stm32-ep: Add PCIe Endpoint support for STM32MP25 dt-bindings: PCI: Add STM32MP25 PCIe Endpoint bindings PCI: stm32: Add PCIe host support for STM32MP25 PCI: xilinx-nwl: Fix ECAM programming PCI: j721e: Fix incorrect error message in probe() PCI: keystone: Use devm_request_irq() to free "ks-pcie-error-irq" on exit dt-bindings: PCI: qcom,pcie-x1e80100: Set clocks minItems for the fifth Glymur PCIe Controller PCI: dwc: Support 16-lane operation PCI: Add lockdep assertion in pci_stop_and_remove_bus_device() PCI/IOV: Add PCI rescan-remove locking when enabling/disabling SR-IOV PCI: rcar-host: Convert struct rcar_msi mask_lock into raw spinlock PCI: tegra194: Rename 'root_bus' to 'root_port_bus' in tegra_pcie_downstream_dev_to_D0() PCI: tegra: Convert struct tegra_msi mask_lock into raw spinlock PCI: rcar-gen4: Fix inverted break condition in PHY initialization PCI: rcar-gen4: Assure reset occurs before DBI access PCI: rcar-gen4: Add missing 1ms delay after PWR reset assertion PCI: Set up bridge resources earlier PCI: rcar-host: Drop PMSR spinlock ...
2025-09-26net: qed: Remove redundant NULL checks after list_first_entry()Zhen Ni
list_first_entry() never returns NULL — if the list is empty, it still returns a pointer to an invalid object, leading to potential invalid memory access when dereferenced. The calls to list_first_entry() are always guarded by !list_empty(), which guarantees a valid entry is returned. Therefore, the additional `if (!p_buffer) break;` checks in qed_ooo_release_connection_isles(), qed_ooo_release_all_isles(), and qed_ooo_free() are redundant and unreachable. Remove the dead code for clarity and consistency with common list handling patterns in the kernel. No functional change intended. Signed-off-by: Zhen Ni <zhen.ni@easystack.cn> Link: https://patch.msgid.link/20250924030219.1252773-1-zhen.ni@easystack.cn Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-09-22net: WQ_PERCPU added to alloc_workqueue usersMarco Crivellari
Currently if a user enqueue a work item using schedule_delayed_work() the used wq is "system_wq" (per-cpu wq) while queue_delayed_work() use WORK_CPU_UNBOUND (used when a cpu is not specified). The same applies to schedule_work() that is using system_wq and queue_work(), that makes use again of WORK_CPU_UNBOUND. This lack of consistentcy cannot be addressed without refactoring the API. alloc_workqueue() treats all queues as per-CPU by default, while unbound workqueues must opt-in via WQ_UNBOUND. This default is suboptimal: most workloads benefit from unbound queues, allowing the scheduler to place worker threads where they’re needed and reducing noise when CPUs are isolated. This change adds a new WQ_PERCPU flag at the network subsystem, to explicitly request the use of the per-CPU behavior. Both flags coexist for one release cycle to allow callers to transition their calls. Once migration is complete, WQ_UNBOUND can be removed and unbound will become the implicit default. With the introduction of the WQ_PERCPU flag (equivalent to !WQ_UNBOUND), any alloc_workqueue() caller that doesn’t explicitly specify WQ_UNBOUND must now use WQ_PERCPU. All existing users have been updated accordingly. Suggested-by: Tejun Heo <tj@kernel.org> Signed-off-by: Marco Crivellari <marco.crivellari@suse.com> Link: https://patch.msgid.link/20250918142427.309519-4-marco.crivellari@suse.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-09-18Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski
Cross-merge networking fixes after downstream PR (net-6.17-rc7). No conflicts. Adjacent changes: drivers/net/ethernet/mellanox/mlx5/core/en/fs.h 9536fbe10c9d ("net/mlx5e: Add PSP steering in local NIC RX") 7601a0a46216 ("net/mlx5e: Add a miss level for ipsec crypto offload") Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-09-14qed: Don't collect too many protection override GRC elementsJamie Bainbridge
In the protection override dump path, the firmware can return far too many GRC elements, resulting in attempting to write past the end of the previously-kmalloc'ed dump buffer. This will result in a kernel panic with reason: BUG: unable to handle kernel paging request at ADDRESS where "ADDRESS" is just past the end of the protection override dump buffer. The start address of the buffer is: p_hwfn->cdev->dbg_features[DBG_FEATURE_PROTECTION_OVERRIDE].dump_buf and the size of the buffer is buf_size in the same data structure. The panic can be arrived at from either the qede Ethernet driver path: [exception RIP: qed_grc_dump_addr_range+0x108] qed_protection_override_dump at ffffffffc02662ed [qed] qed_dbg_protection_override_dump at ffffffffc0267792 [qed] qed_dbg_feature at ffffffffc026aa8f [qed] qed_dbg_all_data at ffffffffc026b211 [qed] qed_fw_fatal_reporter_dump at ffffffffc027298a [qed] devlink_health_do_dump at ffffffff82497f61 devlink_health_report at ffffffff8249cf29 qed_report_fatal_error at ffffffffc0272baf [qed] qede_sp_task at ffffffffc045ed32 [qede] process_one_work at ffffffff81d19783 or the qedf storage driver path: [exception RIP: qed_grc_dump_addr_range+0x108] qed_protection_override_dump at ffffffffc068b2ed [qed] qed_dbg_protection_override_dump at ffffffffc068c792 [qed] qed_dbg_feature at ffffffffc068fa8f [qed] qed_dbg_all_data at ffffffffc0690211 [qed] qed_fw_fatal_reporter_dump at ffffffffc069798a [qed] devlink_health_do_dump at ffffffff8aa95e51 devlink_health_report at ffffffff8aa9ae19 qed_report_fatal_error at ffffffffc0697baf [qed] qed_hw_err_notify at ffffffffc06d32d7 [qed] qed_spq_post at ffffffffc06b1011 [qed] qed_fcoe_destroy_conn at ffffffffc06b2e91 [qed] qedf_cleanup_fcport at ffffffffc05e7597 [qedf] qedf_rport_event_handler at ffffffffc05e7bf7 [qedf] fc_rport_work at ffffffffc02da715 [libfc] process_one_work at ffffffff8a319663 Resolve this by clamping the firmware's return value to the maximum number of legal elements the firmware should return. Fixes: d52c89f120de8 ("qed*: Utilize FW 8.37.2.0") Signed-off-by: Jamie Bainbridge <jamie.bainbridge@gmail.com> Link: https://patch.msgid.link/f8e1182934aa274c18d0682a12dbaf347595469c.1757485536.git.jamie.bainbridge@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-08-26devlink: Move graceful period parameter to reporter opsShahar Shitrit
Move the default graceful period from a parameter to devlink_health_reporter_create() to a field in the devlink_health_reporter_ops structure. This change improves consistency, as the graceful period is inherently tied to the reporter's behavior and recovery policy. It simplifies the signature of devlink_health_reporter_create() and its internal helper functions. It also centralizes the reporter configuration at the ops structure, preparing the groundwork for a downstream patch that will introduce a devlink health reporter burst period attribute whose default value will similarly be provided by the driver via the ops structure. Signed-off-by: Shahar Shitrit <shshitrit@nvidia.com> Reviewed-by: Jiri Pirko <jiri@nvidia.com> Signed-off-by: Mark Bloch <mbloch@nvidia.com> Link: https://patch.msgid.link/20250824084354.533182-2-mbloch@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-08-13PCI/ERR: Update device error_state already after resetLukas Wunner
After a Fatal Error has been reported by a device and has been recovered through a Secondary Bus Reset, AER updates the device's error_state to pci_channel_io_normal before invoking its driver's ->resume() callback. By contrast, EEH updates the error_state earlier, namely after resetting the device and before invoking its driver's ->slot_reset() callback. Commit c58dc575f3c8 ("powerpc/pseries: Set error_state to pci_channel_io_normal in eeh_report_reset()") explains in great detail that the earlier invocation is necessitated by various drivers checking accessibility of the device with pci_channel_offline() and avoiding accesses if it returns true. It returns true for any other error_state than pci_channel_io_normal. The device should be accessible already after reset, hence the reasoning is that it's safe to update the error_state immediately afterwards. This deviation between AER and EEH seems problematic because drivers behave differently depending on which error recovery mechanism the platform uses. Three drivers have gone so far as to update the error_state themselves, presumably to work around AER's behavior. For consistency, amend AER to update the error_state at the same recovery steps as EEH. Drop the now unnecessary workaround from the three drivers. Keep updating the error_state before ->resume() in case ->error_detected() or ->mmio_enabled() return PCI_ERS_RESULT_RECOVERED, which causes ->slot_reset() to be skipped. There are drivers doing this even for Fatal Errors, e.g. mhi_pci_error_detected(). Signed-off-by: Lukas Wunner <lukas@wunner.de> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Link: https://patch.msgid.link/4517af6359ffb9d66152b827a5d2833459144e3f.1755008151.git.lukas@wunner.de
2025-07-30Merge tag 'net-next-6.17' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core & protocols: - Wrap datapath globals into net_aligned_data, to avoid false sharing - Preserve MSG_ZEROCOPY in forwarding (e.g. out of a container) - Add SO_INQ and SCM_INQ support to AF_UNIX - Add SIOCINQ support to AF_VSOCK - Add TCP_MAXSEG sockopt to MPTCP - Add IPv6 force_forwarding sysctl to enable forwarding per interface - Make TCP validation of whether packet fully fits in the receive window and the rcv_buf more strict. With increased use of HW aggregation a single "packet" can be multiple 100s of kB - Add MSG_MORE flag to optimize large TCP transmissions via sockmap, improves latency up to 33% for sockmap users - Convert TCP send queue handling from tasklet to BH workque - Improve BPF iteration over TCP sockets to see each socket exactly once - Remove obsolete and unused TCP RFC3517/RFC6675 loss recovery code - Support enabling kernel threads for NAPI processing on per-NAPI instance basis rather than a whole device. Fully stop the kernel NAPI thread when threaded NAPI gets disabled. Previously thread would stick around until ifdown due to tricky synchronization - Allow multicast routing to take effect on locally-generated packets - Add output interface argument for End.X in segment routing - MCTP: add support for gateway routing, improve bind() handling - Don't require rtnl_lock when fetching an IPv6 neighbor over Netlink - Add a new neighbor flag ("extern_valid"), which cedes refresh responsibilities to userspace. This is needed for EVPN multi-homing where a neighbor entry for a multi-homed host needs to be synced across all the VTEPs among which the host is multi-homed - Support NUD_PERMANENT for proxy neighbor entries - Add a new queuing discipline for IETF RFC9332 DualQ Coupled AQM - Add sequence numbers to netconsole messages. Unregister netconsole's console when all net targets are removed. Code refactoring. Add a number of selftests - Align IPSec inbound SA lookup to RFC 4301. Only SPI and protocol should be used for an inbound SA lookup - Support inspecting ref_tracker state via DebugFS - Don't force bonding advertisement frames tx to ~333 ms boundaries. Add broadcast_neighbor option to send ARP/ND on all bonded links - Allow providing upcall pid for the 'execute' command in openvswitch - Remove DCCP support from Netfilter's conntrack - Disallow multiple packet duplications in the queuing layer - Prevent use of deprecated iptables code on PREEMPT_RT Driver API: - Support RSS and hashing configuration over ethtool Netlink - Add dedicated ethtool callbacks for getting and setting hashing fields - Add support for power budget evaluation strategy in PSE / Power-over-Ethernet. Generate Netlink events for overcurrent etc - Support DPLL phase offset monitoring across all device inputs. Support providing clock reference and SYNC over separate DPLL inputs - Support traffic classes in devlink rate API for bandwidth management - Remove rtnl_lock dependency from UDP tunnel port configuration Device drivers: - Add a new Broadcom driver for 800G Ethernet (bnge) - Add a standalone driver for Microchip ZL3073x DPLL - Remove IBM's NETIUCV device driver - Ethernet high-speed NICs: - Broadcom (bnxt): - support zero-copy Tx of DMABUF memory - take page size into account for page pool recycling rings - Intel (100G, ice, idpf): - idpf: XDP and AF_XDP support preparations - idpf: add flow steering - add link_down_events statistic - clean up the TSPLL code - preparations for live VM migration - nVidia/Mellanox: - support zero-copy Rx/Tx interfaces (DMABUF and io_uring) - optimize context memory usage for matchers - expose serial numbers in devlink info - support PCIe congestion metrics - Meta (fbnic): - add 25G, 50G, and 100G link modes to phylink - support dumping FW logs - Marvell/Cavium: - support for CN20K generation of the Octeon chips - Amazon: - add HW clock (without timestamping, just hypervisor time access) - Ethernet virtual: - VirtIO net: - support segmentation of UDP-tunnel-encapsulated packets - Google (gve): - support packet timestamping and clock synchronization - Microsoft vNIC: - add handler for device-originated servicing events - allow dynamic MSI-X vector allocation - support Tx bandwidth clamping - Ethernet NICs consumer, and embedded: - AMD: - amd-xgbe: hardware timestamping and PTP clock support - Broadcom integrated MACs (bcmgenet, bcmasp): - use napi_complete_done() return value to support NAPI polling - add support for re-starting auto-negotiation - Broadcom switches (b53): - support BCM5325 switches - add bcm63xx EPHY power control - Synopsys (stmmac): - lots of code refactoring and cleanups - TI: - icssg-prueth: read firmware-names from device tree - icssg: PRP offload support - Microchip: - lan78xx: convert to PHYLINK for improved PHY and MAC management - ksz: add KSZ8463 switch support - Intel: - support similar queue priority scheme in multi-queue and time-sensitive networking (taprio) - support packet pre-emption in both - RealTek (r8169): - enable EEE at 5Gbps on RTL8126 - Airoha: - add PPPoE offload support - MDIO bus controller for Airoha AN7583 - Ethernet PHYs: - support for the IPQ5018 internal GE PHY - micrel KSZ9477 switch-integrated PHYs: - add MDI/MDI-X control support - add RX error counters - add cable test support - add Signal Quality Indicator (SQI) reporting - dp83tg720: improve reset handling and reduce link recovery time - support bcm54811 (and its MII-Lite interface type) - air_en8811h: support resume/suspend - support PHY counters for QCA807x and QCA808x - support WoL for QCA807x - CAN drivers: - rcar_canfd: support for Transceiver Delay Compensation - kvaser: report FW versions via devlink dev info - WiFi: - extended regulatory info support (6 GHz) - add statistics and beacon monitor for Multi-Link Operation (MLO) - support S1G aggregation, improve S1G support - add Radio Measurement action fields - support per-radio RTS threshold - some work around how FIPS affects wifi, which was wrong (RC4 is used by TKIP, not only WEP) - improvements for unsolicited probe response handling - WiFi drivers: - RealTek (rtw88): - IBSS mode for SDIO devices - RealTek (rtw89): - BT coexistence for MLO/WiFi7 - concurrent station + P2P support - support for USB devices RTL8851BU/RTL8852BU - Intel (iwlwifi): - use embedded PNVM in (to be released) FW images to fix compatibility issues - many cleanups (unused FW APIs, PCIe code, WoWLAN) - some FIPS interoperability - MediaTek (mt76): - firmware recovery improvements - more MLO work - Qualcomm/Atheros (ath12k): - fix scan on multi-radio devices - more EHT/Wi-Fi 7 features - encapsulation/decapsulation offload - Broadcom (brcm80211): - support SDIO 43751 device - Bluetooth: - hci_event: add support for handling LE BIG Sync Lost event - ISO: add socket option to report packet seqnum via CMSG - ISO: support SCM_TIMESTAMPING for ISO TS - Bluetooth drivers: - intel_pcie: support Function Level Reset - nxpuart: add support for 4M baudrate - nxpuart: implement powerup sequence, reset, FW dump, and FW loading" * tag 'net-next-6.17' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1742 commits) dpll: zl3073x: Fix build failure selftests: bpf: fix legacy netfilter options ipv6: annotate data-races around rt->fib6_nsiblings ipv6: fix possible infinite loop in fib6_info_uses_dev() ipv6: prevent infinite loop in rt6_nlmsg_size() ipv6: add a retry logic in net6_rt_notify() vrf: Drop existing dst reference in vrf_ip6_input_dst net/sched: taprio: align entry index attr validation with mqprio net: fsl_pq_mdio: use dev_err_probe selftests: rtnetlink.sh: remove esp4_offload after test vsock: remove unnecessary null check in vsock_getname() igb: xsk: solve negative overflow of nb_pkts in zerocopy mode stmmac: xsk: fix negative overflow of budget in zerocopy mode dt-bindings: ieee802154: Convert at86rf230.txt yaml format net: dsa: microchip: Disable PTP function of KSZ8463 net: dsa: microchip: Setup fiber ports for KSZ8463 net: dsa: microchip: Write switch MAC address differently for KSZ8463 net: dsa: microchip: Use different registers for KSZ8463 net: dsa: microchip: Add KSZ8463 switch support to KSZ DSA driver dt-bindings: net: dsa: microchip: Add KSZ8463 switch support ...
2025-07-29Merge tag 'timers-cleanups-2025-07-27' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull timer cleanups from Thomas Gleixner: "A treewide cleanup of struct cycle_counter const annotations. The initial idea of making them const was correct as they were seperate instances. When they got embedded into larger data structures, which are even modified by the callback this got moot. The only reason why this went unnoticed is that the required container_of() casts the const attribute forcefully away. Stop pretending that it is const" * tag 'timers-cleanups-2025-07-27' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: time/timecounter: Fix the lie that struct cyclecounter is const
2025-07-29Merge tag 'driver-core-6.17-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/driver-core/driver-core Pull driver core updates from Danilo Krummrich: "debugfs: - Remove unneeded debugfs_file_{get,put}() instances - Remove last remnants of debugfs_real_fops() - Allow storing non-const void * in struct debugfs_inode_info::aux sysfs: - Switch back to attribute_group::bin_attrs (treewide) - Switch back to bin_attribute::read()/write() (treewide) - Constify internal references to 'struct bin_attribute' Support cache-ids for device-tree systems: - Add arch hook arch_compact_of_hwid() - Use arch_compact_of_hwid() to compact MPIDR values on arm64 Rust: - Device: - Introduce CoreInternal device context (for bus internal methods) - Provide generic drvdata accessors for bus devices - Provide Driver::unbind() callbacks - Use the infrastructure above for auxiliary, PCI and platform - Implement Device::as_bound() - Rename Device::as_ref() to Device::from_raw() (treewide) - Implement fwnode and device property abstractions - Implement example usage in the Rust platform sample driver - Devres: - Remove the inner reference count (Arc) and use pin-init instead - Replace Devres::new_foreign_owned() with devres::register() - Require T to be Send in Devres<T> - Initialize the data kept inside a Devres last - Provide an accessor for the Devres associated Device - Device ID: - Add support for ACPI device IDs and driver match tables - Split up generic device ID infrastructure - Use generic device ID infrastructure in net::phy - DMA: - Implement the dma::Device trait - Add DMA mask accessors to dma::Device - Implement dma::Device for PCI and platform devices - Use DMA masks from the DMA sample module - I/O: - Implement abstraction for resource regions (struct resource) - Implement resource-based ioremap() abstractions - Provide platform device accessors for I/O (remap) requests - Misc: - Support fallible PinInit types in Revocable - Implement Wrapper<T> for Opaque<T> - Merge pin-init blanket dependencies (for Devres) Misc: - Fix OF node leak in auxiliary_device_create() - Use util macros in device property iterators - Improve kobject sample code - Add device_link_test() for testing device link flags - Fix typo in Documentation/ABI/testing/sysfs-kernel-address_bits - Hint to prefer container_of_const() over container_of()" * tag 'driver-core-6.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/driver-core/driver-core: (84 commits) rust: io: fix broken intra-doc links to `platform::Device` rust: io: fix broken intra-doc link to missing `flags` module rust: io: mem: enable IoRequest doc-tests rust: platform: add resource accessors rust: io: mem: add a generic iomem abstraction rust: io: add resource abstraction rust: samples: dma: set DMA mask rust: platform: implement the `dma::Device` trait rust: pci: implement the `dma::Device` trait rust: dma: add DMA addressing capabilities rust: dma: implement `dma::Device` trait rust: net::phy Change module_phy_driver macro to use module_device_table macro rust: net::phy represent DeviceId as transparent wrapper over mdio_device_id rust: device_id: split out index support into a separate trait device: rust: rename Device::as_ref() to Device::from_raw() arm64: cacheinfo: Provide helper to compress MPIDR value into u32 cacheinfo: Add arch hook to compress CPU h/w id into 32 bits for cache-id cacheinfo: Set cache 'id' based on DT data container_of: Document container_of() is not to be used in new code driver core: auxiliary bus: fix OF node leak ...
2025-07-25net: Fix typosBjorn Helgaas
Fix typos in comments and error messages. Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: David Arinzon <darinzon@amazon.com> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://patch.msgid.link/20250723201528.2908218-1-helgaas@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-07-01time/timecounter: Fix the lie that struct cyclecounter is constGreg Kroah-Hartman
In both the read callback for struct cyclecounter, and in struct timecounter, struct cyclecounter is declared as a const pointer. Unfortunatly, a number of users of this pointer treat it as a non-const pointer as it is burried in a larger structure that is heavily modified by the callback function when accessed. This lie had been hidden by the fact that container_of() "casts away" a const attribute of a pointer without any compiler warning happening at all. Fix this all up by removing the const attribute in the needed places so that everyone can see that the structure really isn't const, but can, and is, modified by the users of it. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Link: https://lore.kernel.org/all/2025070124-backyard-hurt-783a@gregkh
2025-06-26Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski
Cross-merge networking fixes after downstream PR (net-6.16-rc4). Conflicts: Documentation/netlink/specs/mptcp_pm.yaml 9e6dd4c256d0 ("netlink: specs: mptcp: replace underscores with dashes in names") ec362192aa9e ("netlink: specs: fix up indentation errors") https://lore.kernel.org/20250626122205.389c2cd4@canb.auug.org.au Adjacent changes: Documentation/netlink/specs/fou.yaml 791a9ed0a40d ("netlink: specs: fou: replace underscores with dashes in names") 880d43ca9aa4 ("netlink: specs: clean up spaces in brackets") Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-06-23net: qed: reduce stack usage for TLV processingArnd Bergmann
clang gets a bit confused by the code in the qed_mfw_process_tlv_req and ends up spilling registers to the stack hundreds of times. When sanitizers are enabled, this can end up blowing the stack warning limit: drivers/net/ethernet/qlogic/qed/qed_mng_tlv.c:1244:5: error: stack frame size (1824) exceeds limit (1280) in 'qed_mfw_process_tlv_req' [-Werror,-Wframe-larger-than] Apparently the problem is the complexity of qed_mfw_update_tlvs() after inlining, and marking the four main branches of that function as noinline_for_stack makes this problem completely go away, the stack usage goes down to 100 bytes. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Alexander Lobakin <aleksander.lobakin@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2025-06-21eth: qede: migrate to new RXFH callbacksJakub Kicinski
Migrate to new callbacks added by commit 9bb00786fc61 ("net: ethtool: add dedicated callbacks for getting and setting rxfh fields"). Reviewed-by: Simon Horman <horms@kernel.org> Link: https://patch.msgid.link/20250618203823.1336156-6-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-06-18udp_tunnel: remove rtnl_lock dependencyStanislav Fomichev
Drivers that are using ops lock and don't depend on RTNL lock still need to manage it because udp_tunnel's RTNL dependency. Introduce new udp_tunnel_nic_lock and use it instead of rtnl_lock. Drop non-UDP_TUNNEL_NIC_INFO_MAY_SLEEP mode from udp_tunnel infra (udp_tunnel_nic_device_sync_work needs to grab udp_tunnel_nic_lock mutex and might sleep). Cover more places in v4: - netlink - udp_tunnel_notify_add_rx_port (ndo_open) - triggers udp_tunnel_nic_device_sync_work - udp_tunnel_notify_del_rx_port (ndo_stop) - triggers udp_tunnel_nic_device_sync_work - udp_tunnel_get_rx_info (__netdev_update_features) - triggers NETDEV_UDP_TUNNEL_PUSH_INFO - udp_tunnel_drop_rx_info (__netdev_update_features) - triggers NETDEV_UDP_TUNNEL_DROP_INFO - udp_tunnel_nic_reset_ntf (ndo_open) - notifiers - udp_tunnel_nic_netdevice_event, depending on the event: - triggers NETDEV_UDP_TUNNEL_PUSH_INFO - triggers NETDEV_UDP_TUNNEL_DROP_INFO - ethnl_tunnel_info_reply_size - udp_tunnel_nic_set_port_priv (two intel drivers) Cc: Michael Chan <michael.chan@broadcom.com> Suggested-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Stanislav Fomichev <stfomichev@gmail.com> Link: https://patch.msgid.link/20250616162117.287806-4-stfomichev@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-06-17sysfs: treewide: switch back to bin_attribute::read()/write()Thomas Weißschuh
The bin_attribute argument of bin_attribute::read() is now const. This makes the _new() callbacks unnecessary. Switch all users back. Signed-off-by: Thomas Weißschuh <linux@weissschuh.net> Link: https://lore.kernel.org/r/20250530-sysfs-const-bin_attr-final-v3-3-724bfcf05b99@weissschuh.net Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-06-08treewide, timers: Rename from_timer() to timer_container_of()Ingo Molnar
Move this API to the canonical timer_*() namespace. [ tglx: Redone against pre rc1 ] Signed-off-by: Ingo Molnar <mingo@kernel.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Link: https://lore.kernel.org/all/aB2X0jCKQO56WdMt@gmail.com
2025-05-15Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski
Cross-merge networking fixes after downstream PR (net-6.15-rc7). Conflicts: tools/testing/selftests/drivers/net/hw/ncdevmem.c 97c4e094a4b2 ("tests/ncdevmem: Fix double-free of queue array") 2f1a805f32ba ("selftests: ncdevmem: Implement devmem TCP TX") https://lore.kernel.org/20250514122900.1e77d62d@canb.auug.org.au Adjacent changes: net/core/devmem.c net/core/devmem.h 0afc44d8cdf6 ("net: devmem: fix kernel panic when netlink socket close after module unload") bd61848900bf ("net: devmem: Implement TX path") Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-05-13qlcnic: fix memory leak in qlcnic_sriov_channel_cfg_cmd()Abdun Nihaal
In one of the error paths in qlcnic_sriov_channel_cfg_cmd(), the memory allocated in qlcnic_sriov_alloc_bc_mbx_args() for mailbox arguments is not freed. Fix that by jumping to the error path that frees them, by calling qlcnic_free_mbx_args(). This was found using static analysis. Fixes: f197a7aa6288 ("qlcnic: VF-PF communication channel implementation") Signed-off-by: Abdun Nihaal <abdun.nihaal@gmail.com> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://patch.msgid.link/20250512044829.36400-1-abdun.nihaal@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-05-08net: qede: Initialize qede_ll_ops with designated initializerNathan Chancellor
After a recent change [1] in clang's randstruct implementation to randomize structures that only contain function pointers, there is an error because qede_ll_ops get randomized but does not use a designated initializer for the first member: drivers/net/ethernet/qlogic/qede/qede_main.c:206:2: error: a randomized struct can only be initialized with a designated initializer 206 | { | ^ Explicitly initialize the common member using a designated initializer to fix the build. Cc: stable@vger.kernel.org Fixes: 035f7f87b729 ("randstruct: Enable Clang support") Link: https://github.com/llvm/llvm-project/commit/04364fb888eea6db9811510607bed4b200bcb082 [1] Signed-off-by: Nathan Chancellor <nathan@kernel.org> Link: https://patch.msgid.link/20250507-qede-fix-clang-randstruct-v1-1-5ccc15626fba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-04-15qed: Remove unused qed_db_recovery_dpDr. David Alan Gilbert
qed_db_recovery_dp() was added in 2018 as part of commit 36907cd5cd72 ("qed: Add doorbell overflow recovery mechanism") but has remained unused. Remove it. Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org> Link: https://patch.msgid.link/20250414005247.341243-6-linux@treblig.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-04-15qed: Remove unused qed_print_mcp_trace_*Dr. David Alan Gilbert
While most of the trace code is reachable by other routes (I think mostly via the qed_features_lookup[] array), there are a couple of unused wrappers. qed_print_mcp_trace_line() and qed_print_mcp_trace_results_cont() were added in 2018 as part of commit a3f723079df8 ("qed*: Utilize FW 8.37.7.0") but have remained unused. Remove them. Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org> Link: https://patch.msgid.link/20250414005247.341243-5-linux@treblig.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-04-15qed: Remove unused qed_ptt_invalidateDr. David Alan Gilbert
qed_ptt_invalidate() was added in 2015 as part of commit fe56b9e6a8d9 ("qed: Add module with basic common support") but has remained unused. Remove it. Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org> Link: https://patch.msgid.link/20250414005247.341243-4-linux@treblig.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-04-15qed: Remove unused qed_calc_*_ctx_validation functionsDr. David Alan Gilbert
qed_calc_session_ctx_validation() and qed_calc_task_ctx_validation() were added as part of 2017's commit da09091732ae ("qed*: Utilize FW 8.33.1.0") but have remained unused. Remove them. This leaves; con_region_offsets[], task_region_offsets[], cdu_crc8_table and qed_calc_cdu_validation_byte() unused. Remove them. Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org> Link: https://patch.msgid.link/20250414005247.341243-3-linux@treblig.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-04-15qed: Remove unused qed_memset_*ctx functionsDr. David Alan Gilbert
qed_memset_session_ctx() and qed_memset_task_ctx() were added in 2017 as part of commit da09091732ae ("qed*: Utilize FW 8.33.1.0") but have not been used. Remove them. Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org> Link: https://patch.msgid.link/20250414005247.341243-2-linux@treblig.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-04-05treewide: Switch/rename to timer_delete[_sync]()Thomas Gleixner
timer_delete[_sync]() replaces del_timer[_sync](). Convert the whole tree over and remove the historical wrapper inlines. Conversion was done with coccinelle plus manual fixups where necessary. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Ingo Molnar <mingo@kernel.org>
2025-03-18qed: remove cast to pointers passed to kfreeChen Ni
Remove unnecessary casts to pointer types passed to kfree. Issue detected by coccinelle: @@ type t1; expression *e; @@ -kfree((t1 *)e); +kfree(e); Signed-off-by: Chen Ni <nichen@iscas.ac.cn> Reviewed-by: Michal Kubiak <michal.kubiak@intel.com> Link: https://patch.msgid.link/20250311070624.1037787-1-nichen@iscas.ac.cn Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-03-13Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netPaolo Abeni
Cross-merge networking fixes after downstream PR (net-6.14-rc6). Conflicts: tools/testing/selftests/drivers/net/ping.py 75cc19c8ff89 ("selftests: drv-net: add xdp cases for ping.py") de94e8697405 ("selftests: drv-net: store addresses in dict indexed by ipver") https://lore.kernel.org/netdev/20250311115758.17a1d414@canb.auug.org.au/ net/core/devmem.c a70f891e0fa0 ("net: devmem: do not WARN conditionally after netdev_rx_queue_restart()") 1d22d3060b9b ("net: drop rtnl_lock for queue_mgmt operations") https://lore.kernel.org/netdev/20250313114929.43744df1@canb.auug.org.au/ Adjacent changes: tools/testing/selftests/net/Makefile 6f50175ccad4 ("selftests: Add IPv6 link-local address generation tests for GRE devices.") 2e5584e0f913 ("selftests/net: expand cmsg_ipv6.sh with ipv4") drivers/net/ethernet/broadcom/bnxt/bnxt.c 661958552eda ("eth: bnxt: do not use BNXT_VNIC_NTUPLE unconditionally in queue restart logic") fe96d717d38e ("bnxt_en: Extend queue stop/start for TX rings") Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-03-11qlcnic: fix memory leak issues in qlcnic_sriov_common.cHaoxiang Li
Add qlcnic_sriov_free_vlans() in qlcnic_sriov_alloc_vlans() if any sriov_vlans fails to be allocated. Add qlcnic_sriov_free_vlans() to free the memory allocated by qlcnic_sriov_alloc_vlans() if "sriov->allowed_vlans" fails to be allocated. Fixes: 91b7282b613d ("qlcnic: Support VLAN id config.") Cc: stable@vger.kernel.org Signed-off-by: Haoxiang Li <haoxiang_li2024@163.com> Link: https://patch.msgid.link/20250307094952.14874-1-haoxiang_li2024@163.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-02-04net: qed: fix typosAndrew Kreimer
There are some typos in comments/messages: - Valiate -> Validate - acceptible -> acceptable - acces -> access - relased -> released Fix them via codespell. Signed-off-by: Andrew Kreimer <algonell@gmail.com> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://patch.msgid.link/20250203175419.4146-1-algonell@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-12-20qlcnic: use const 'struct bin_attribute' callbacksThomas Weißschuh
The sysfs core now provides callback variants that explicitly take a const pointer. Use them so the non-const variants can be removed. Signed-off-by: Thomas Weißschuh <linux@weissschuh.net> Link: https://patch.msgid.link/20241219-sysfs-const-bin_attr-net-v2-1-93bdaece3c90@weissschuh.net Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-12-19Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski
Cross-merge networking fixes after downstream PR (net-6.13-rc4). No conflicts. Adjacent changes: drivers/net/ethernet/renesas/rswitch.h 32fd46f5b69e ("net: renesas: rswitch: remove speed from gwca structure") 922b4b955a03 ("net: renesas: rswitch: rework ts tags management") Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-12-17netxen_nic: constify 'struct bin_attribute'Thomas Weißschuh
The sysfs core now allows instances of 'struct bin_attribute' to be moved into read-only memory. Make use of that to protect them against accidental or malicious modifications. Signed-off-by: Thomas Weißschuh <linux@weissschuh.net> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://patch.msgid.link/20241216-sysfs-const-bin_attr-net-v1-4-ec460b91f274@weissschuh.net Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-12-17qed: fix possible uninit pointer read in qed_mcp_nvm_info_populate()Gianfranco Trad
Coverity reports an uninit pointer read in qed_mcp_nvm_info_populate(). If EOPNOTSUPP is returned from qed_mcp_bist_nvm_get_num_images() ensure nvm_info.num_images is set to 0 to avoid possible uninit assignment to p_hwfn->nvm_info.image_att later on in out label. Closes: https://scan5.scan.coverity.com/#/project-view/63204/10063?selectedIssue=1636666 Suggested-by: Simon Horman <horms@kernel.org> Signed-off-by: Gianfranco Trad <gianf.trad@gmail.com> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://patch.msgid.link/20241215011733.351325-2-gianf.trad@gmail.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2024-12-03net/qed: allow old cards not supporting "num_images" to workLouis Leseur
Commit 43645ce03e00 ("qed: Populate nvm image attribute shadow.") added support for populating flash image attributes, notably "num_images". However, some cards were not able to return this information. In such cases, the driver would return EINVAL, causing the driver to exit. Add check to return EOPNOTSUPP instead of EINVAL when the card is not able to return these information. The caller function already handles EOPNOTSUPP without error. Fixes: 43645ce03e00 ("qed: Populate nvm image attribute shadow.") Co-developed-by: Florian Forestier <florian@forestier.re> Signed-off-by: Florian Forestier <florian@forestier.re> Signed-off-by: Louis Leseur <louis.leseur@gmail.com> Link: https://patch.msgid.link/20241128083633.26431-1-louis.leseur@gmail.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2024-11-18Revert "net: ethtool: Avoid thousands of -Wflex-array-member-not-at-end ↵Kees Cook
warnings" This reverts commit 3bd9b9abdf1563a22041b7255baea6d449902f1a. We cannot use the new tagged struct group because it throws C++ errors even under "extern C". Signed-off-by: Kees Cook <kees@kernel.org> Link: https://patch.msgid.link/20241115204308.3821419-1-kees@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-11-15ndo_fdb_del: Add a parameter to report whether notification was sentPetr Machata
In a similar fashion to ndo_fdb_add, which was covered in the previous patch, add the bool *notified argument to ndo_fdb_del. Callees that send a notification on their own set the flag to true. Signed-off-by: Petr Machata <petrm@nvidia.com> Reviewed-by: Amit Cohen <amcohen@nvidia.com> Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org> Link: https://patch.msgid.link/06b1acf4953ef0a5ed153ef1f32d7292044f2be6.1731589511.git.petrm@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-11-15ndo_fdb_add: Add a parameter to report whether notification was sentPetr Machata
Currently when FDB entries are added to or deleted from a VXLAN netdevice, the VXLAN driver emits one notification, including the VXLAN-specific attributes. The core however always sends a notification as well, a generic one. Thus two notifications are unnecessarily sent for these operations. A similar situation comes up with bridge driver, which also emits notifications on its own: # ip link add name vx type vxlan id 1000 dstport 4789 # bridge monitor fdb & [1] 1981693 # bridge fdb add de:ad:be:ef:13:37 dev vx self dst 192.0.2.1 de:ad:be:ef:13:37 dev vx dst 192.0.2.1 self permanent de:ad:be:ef:13:37 dev vx self permanent In order to prevent this duplicity, add a paremeter to ndo_fdb_add, bool *notified. The flag is primed to false, and if the callee sends a notification on its own, it sets it to true, thus informing the core that it should not generate another notification. Signed-off-by: Petr Machata <petrm@nvidia.com> Reviewed-by: Amit Cohen <amcohen@nvidia.com> Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org> Link: https://patch.msgid.link/cbf6ae8195e85cbf922f8058ce4eba770f3b71ed.1731589511.git.petrm@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-11-03net: ethtool: Avoid thousands of -Wflex-array-member-not-at-end warningsGustavo A. R. Silva
-Wflex-array-member-not-at-end was introduced in GCC-14, and we are getting ready to enable it, globally. Change the type of the middle struct member currently causing trouble from `struct ethtool_link_settings` to `struct ethtool_link_settings_hdr`. Additionally, update the type of some variables in various functions that don't access the flexible-array member, changing them to the newly created `struct ethtool_link_settings_hdr`. These changes are needed because the type of the conflicting middle members changed. So, those instances that expect the type to be `struct ethtool_link_settings` should be adjusted to the newly created type `struct ethtool_link_settings_hdr`. Also, adjust variable declarations to follow the reverse xmas tree convention. Fix 3338 of the following -Wflex-array-member-not-at-end warnings: include/linux/ethtool.h:214:38: warning: structure containing a flexible array member is not at the end of another structure [-Wflex-array-member-not-at-end] Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org> Link: https://patch.msgid.link/0bc2809fe2a6c11dd4c8a9a10d9bd65cccdb559b.1730238285.git.gustavoars@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-10-29net: qlogic: use ethtool string helpersRosen Penev
The latter is the preferred way to copy ethtool strings. Avoids manually incrementing the pointer. Cleans up the code quite well. Signed-off-by: Rosen Penev <rosenp@gmail.com> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://patch.msgid.link/20241024195534.176410-1-rosenp@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-10-04qed: put cond_resched() in qed_dmae_operation_wait()Michal Schmidt
It is OK to sleep in qed_dmae_operation_wait, because it is called only in process context, while holding p_hwfn->dmae_info.mutex from one of the qed_dmae_{host,grc}2{host,grc} functions. The udelay(DMAE_MIN_WAIT_TIME=2) in the function is too short to replace with usleep_range, but at least it's a suitable point for checking if we should give up the CPU with cond_resched(). This lowers the latency caused by 'ethtool -d' from 10 ms to less than 2 ms on my test system with voluntary preemption. Signed-off-by: Michal Schmidt <mschmidt@redhat.com> Link: https://patch.msgid.link/20240930201307.330692-5-mschmidt@redhat.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-10-04qed: allow the callee of qed_mcp_nvm_read() to sleepMichal Schmidt
qed_mcp_nvm_read has a loop where it calls qed_mcp_nvm_rd_cmd with the argument b_can_sleep=false. And it sleeps once every 0x1000 bytes read. Simplify this by letting qed_mcp_nvm_rd_cmd itself sleep (b_can_sleep=true). It will have slept at least once when successful (in the "Wait for the MFW response" loop). So the extra sleep once every 0x1000 bytes becomes superfluous. Delete it. On my test system with voluntary preemption, this lowers the latency caused by 'ethtool -d' from 53 ms to 10 ms. Signed-off-by: Michal Schmidt <mschmidt@redhat.com> Link: https://patch.msgid.link/20240930201307.330692-4-mschmidt@redhat.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-10-04qed: put cond_resched() in qed_grc_dump_ctx_data()Michal Schmidt
On a kernel with preemption none or voluntary, 'ethtool -d' on a qede network device can cause a big latency spike. The biggest part of it is the loop in qed_grc_dump_ctx_data. The function is called only from the .get_size and .perform_dump callbacks for the "grc" feature defined in qed_features_lookup[]. As far as I can see, they are used in: - qed's devlink healh reporter .dump op - qede's ethtool get_regs/get_regs_len/get_dump_data ops - qedf's qedf_get_grc_dump, called from: - qedf_sysfs_write_grcdump - "grcdump" sysfs attribute write - qedf_wq_grcdump - a workqueue It is safe to sleep in all of them. Let's insert a cond_resched() in the outer loop to let other tasks run. Measured using this script: #!/bin/bash DEV=ens3f1 echo wakeup_rt > /sys/kernel/tracing/current_tracer echo 0 > /sys/kernel/tracing/tracing_max_latency echo 1 > /sys/kernel/tracing/tracing_on echo "Setting the task CPU affinity" taskset -p 1 $$ > /dev/null echo "Starting the real-time task" chrt -f 50 bash -c 'while sleep 0.01; do :; done' & sleep 1 echo "Running: ethtool -d $DEV" time ethtool -d $DEV > /dev/null kill %1 echo 0 > /sys/kernel/tracing/tracing_on echo "Measured latency: $(</sys/kernel/tracing/tracing_max_latency) us" echo "To see the latency trace: less /sys/kernel/tracing/trace" The patch lowers the latency from 180 ms to 53 ms on my test system with voluntary preemption. Signed-off-by: Michal Schmidt <mschmidt@redhat.com> Link: https://patch.msgid.link/20240930201307.330692-3-mschmidt@redhat.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-10-04qed: make 'ethtool -d' 10 times fasterMichal Schmidt
As a side effect of commit 5401c3e09928 ("qed: allow sleep in qed_mcp_trace_dump()"), 'ethtool -d' became much slower. Almost all the time is spent collecting the "mcp_trace". It is caused by sleeping too long in _qed_mcp_cmd_and_union. When called with sleeping not allowed, the function delays for 10 µs between firmware polls. But if sleeping is allowed, it sleeps for 10 ms instead. The sleeps in _qed_mcp_cmd_and_union are unnecessarily long. Replace msleep with usleep_range, which allows to achieve a similar polling interval like in the no-sleeping mode (10 - 20 µs). The only caller, qed_mcp_cmd_and_union, can stop doing the multiplication/division of the usecs/max_retries. The polling interval and the number of retries do not need to be parameters at all. On my test system, 'ethtool -d' now takes 4 seconds instead of 44. Signed-off-by: Michal Schmidt <mschmidt@redhat.com> Link: https://patch.msgid.link/20240930201307.330692-2-mschmidt@redhat.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-09-11qlcnic: make read-only const array key staticColin Ian King
Don't populate the const read-only array key on the stack at run time, instead make it static. Signed-off-by: Colin Ian King <colin.i.king@gmail.com> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://patch.msgid.link/20240910120635.115266-1-colin.i.king@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
generated by cgit v1.2.3 (git 2.46.0) at 2025-12-10 06:24:20 +0000