summaryrefslogtreecommitdiff
path: root/drivers/net/ethernet/wangxun/libwx
AgeCommit message (Collapse)Author
2025-11-20net: txgbe: improve functions of AML 40G devicesJiawen Wu
Support to identify QSFP modules for AML 40G devices. The definition of GPIO pins follows the design of the QSFP modules, and TXGBE_GPIOBIT_4 is used for module present. Meanwhile, implement phylink in XLGMII mode by default, and get the link state from MAC link. Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com> Link: https://patch.msgid.link/20251118080259.24676-4-jiawenwu@trustnetic.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-11-20net: txgbe: rename the SFP relatedJiawen Wu
QSFP supported will be introduced for AML 40G devices, the code related to identify various modules should be renamed to more appropriate names. And struct txgbe_hic_i2c_read used to get module information is renamed as struct txgbe_hic_get_module_info, because another SW-FW command to read I2C will be added later. Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com> Link: https://patch.msgid.link/20251118080259.24676-3-jiawenwu@trustnetic.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-11-06Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski
Cross-merge networking fixes after downstream PR (net-6.18-rc5). Conflicts: drivers/net/wireless/ath/ath12k/mac.c 9222582ec524 ("Revert "wifi: ath12k: Fix missing station power save configuration"") 6917e268c433 ("wifi: ath12k: Defer vdev bring-up until CSA finalize to avoid stale beacon") https://lore.kernel.org/11cece9f7e36c12efd732baa5718239b1bf8c950.camel@sipsolutions.net Adjacent changes: drivers/net/ethernet/intel/Kconfig b1d16f7c0063 ("libie: depend on DEBUG_FS when building LIBIE_FWLOG") 93f53db9f9dc ("ice: switch to Page Pool") Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-11-05net: libwx: fix device bus LAN IDJiawen Wu
The device bus LAN ID was obtained from PCI_FUNC(), but when a PF port is passthrough to a virtual machine, the function number may not match the actual port index on the device. This could cause the driver to perform operations such as LAN reset on the wrong port. Fix this by reading the LAN ID from port status register. Fixes: a34b3e6ed8fb ("net: txgbe: Store PCI info") Cc: stable@vger.kernel.org Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://patch.msgid.link/B60A670C1F52CB8E+20251104062321.40059-1-jiawenwu@trustnetic.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-10-28net: txgbe: support RSC offloadJiawen Wu
Support to enable and disable RSC for txgbe devices. Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com> Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Link: https://patch.msgid.link/20251023014538.12644-4-jiawenwu@trustnetic.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-10-28net: txgbe: support TX head write-back modeJiawen Wu
TX head write-back mode is supported on AML devices. When it is enabled, the hardware no longer writes the descriptors DD one by one, but write back pointer of completion descriptor to the head_wb address. Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com> Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Link: https://patch.msgid.link/20251023014538.12644-3-jiawenwu@trustnetic.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-10-28net: txgbe: support RX desc merge modeJiawen Wu
RX descriptor merge mode is supported on AML devices. When it is enabled, the hardware process the RX descriptors in batches. Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com> Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Link: https://patch.msgid.link/20251023014538.12644-2-jiawenwu@trustnetic.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-10-16net: txgbe: optimize the flow to setup PHY for AML devicesJiawen Wu
To adapt to new firmware for AML devices, the driver should send the "SET_LINK_CMD" to the firmware only once when switching PHY interface mode, and no longer needs to re-trigger PHY configuration based on the RX signal interrupt (TXGBE_GPIOBIT_3). In previous firmware versions, the PHY was configured only after receiving "SET_LINK_CMD", and might remain incomplete if the RX signal was lost. To handle this case, the driver used TXGBE_GPIOBIT_3 interrupt to resend the command. This workaround is no longer necessary with the new firmware. And the unknown link speed is permitted in the mailbox buffer. Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com> Link: https://patch.msgid.link/20251014061726.36660-3-jiawenwu@trustnetic.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-09-29net: libwx: restrict change user-set RSS configurationJiawen Wu
Enable/disable SR-IOV will change the number of rings, thereby changing the RSS configuration that the user has set. So reject these attempts if netif_is_rxfh_configured() returns true. And remind the user to reset the RSS configuration. Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com> Link: https://patch.msgid.link/20250926023843.34340-5-jiawenwu@trustnetic.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-09-29net: wangxun: add RSS reta and rxfh fields supportJiawen Wu
Add ethtool ops for Rx flow hashing, query and set RSS indirection table and hash key. Disable UDP RSS by default, and support to configure L4 header fields with TCP/UDP/SCTP for flow hasing. Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com> Link: https://patch.msgid.link/20250926023843.34340-4-jiawenwu@trustnetic.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-09-29net: libwx: move rss_field to struct wxJiawen Wu
For global RSS and multiple RSS scheme, the RSS type fields are defined identically in the registers. So they can be defined as the macros WX_RSS_FIELD_* to cleanup the codes. And to prepare for the RXFH support in the next patch, move the rss_field to struct wx. Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com> Link: https://patch.msgid.link/20250926023843.34340-3-jiawenwu@trustnetic.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-09-29net: libwx: support separate RSS configuration for every poolJiawen Wu
For those devices which support 64 pools, they also support PF and VF (i.e. different pools) to configure different RSS key and hash table. Enable multiple RSS, use up to 64 RSS configurations and each pool has a specific configuration. Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com> Link: https://patch.msgid.link/20250926023843.34340-2-jiawenwu@trustnetic.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-09-26Wangxun: vf: Implement some ethtool apis for get_xxxMengyuan Lou
Implement some ethtool interfaces for obtaining the status of Wangxun Virtual Function Ethernet. Just like connection status, version information, queue depth and so on. Signed-off-by: Mengyuan Lou <mengyuanlou@net-swift.com> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://patch.msgid.link/20250924082140.41612-1-mengyuanlou@net-swift.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-09-11Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski
Cross-merge networking fixes after downstream PR (net-6.17-rc6). Conflicts: net/netfilter/nft_set_pipapo.c net/netfilter/nft_set_pipapo_avx2.c c4eaca2e1052 ("netfilter: nft_set_pipapo: don't check genbit from packetpath lookups") 84c1da7b38d9 ("netfilter: nft_set_pipapo: use avx2 algorithm for insertions too") Only trivial adjacent changes (in a doc and a Makefile). Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-09-04net: libwx: fix to enable RSSJiawen Wu
Now when SRIOV is enabled, PF with multiple queues can only receive all packets on queue 0. This is caused by an incorrect flag judgement, which prevents RSS from being enabled. In fact, RSS is supported for the functions when SRIOV is enabled. Remove the flag judgement to fix it. Fixes: c52d4b898901 ("net: libwx: Redesign flow when sriov is enabled") Cc: stable@vger.kernel.org Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://patch.msgid.link/A3B7449A08A044D0+20250904024322.87145-1-jiawenwu@trustnetic.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-08-22net: wangxun: support to use adaptive RX/TX coalescingJiawen Wu
Support to turn on/off adaptive RX/TX coalesce. When adaptive coalesce is on, use DIM algorithm for a dynamic interrupt moderation. Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com> Link: https://patch.msgid.link/20250821023408.53472-5-jiawenwu@trustnetic.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-08-22net: wangxun: cleanup the code in wx_set_coalesce()Jiawen Wu
Cleanup the code for the next patch to add adaptive RX coalesce. Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com> Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com> Link: https://patch.msgid.link/20250821023408.53472-4-jiawenwu@trustnetic.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-08-22net: wangxun: limit tx_max_coalesced_frames_irqJiawen Wu
Add limitation on tx_max_coalesced_frames_irq as 0 ~ 65535, because 'wx->tx_work_limit' is declared as a member of type u16. Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com> Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Link: https://patch.msgid.link/20250821023408.53472-3-jiawenwu@trustnetic.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-08-22net: ngbe: change the default ITR settingJiawen Wu
Change the default RX/TX ITR for wx_mac_em devices from 20K to 7K, which is an experience value from out-of-tree ngbe driver, to get higher performance on some platforms with weak single-core performance. TCP_SRTEAM test on Phytium 2000+ shows that the throughput of 64-Byte packets is increased from 350.53Mbits/s to 395.92Mbits/s. Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com> Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com> Link: https://patch.msgid.link/20250821023408.53472-2-jiawenwu@trustnetic.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-08-21Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski
Cross-merge networking fixes after downstream PR (net-6.17-rc3). No conflicts or adjacent changes. Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-08-15net: libwx: Fix the size in RSS hash key populationChandra Mohan Sundar
While trying to fill a random RSS key, the size of the pointer is being used rather than the actual size of the RSS key. Fix by passing an appropriate value of the RSS key. This issue was reported by static coverity analyser. Fixes: eb4898fde1de8 ("net: libwx: add wangxun vf common api") Signed-off-by: Chandra Mohan Sundar <chandramohan.explore@gmail.com> Link: https://patch.msgid.link/20250814163014.613004-1-chandramohan.explore@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-08-13net: libwx: cleanup VF register macrosJiawen Wu
Adjust the order of VF regitser macros, make it elegant. Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com> Link: https://patch.msgid.link/778899EE1D862EC2+20250812093725.58821-1-jiawenwu@trustnetic.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-07-30Merge tag 'net-next-6.17' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core & protocols: - Wrap datapath globals into net_aligned_data, to avoid false sharing - Preserve MSG_ZEROCOPY in forwarding (e.g. out of a container) - Add SO_INQ and SCM_INQ support to AF_UNIX - Add SIOCINQ support to AF_VSOCK - Add TCP_MAXSEG sockopt to MPTCP - Add IPv6 force_forwarding sysctl to enable forwarding per interface - Make TCP validation of whether packet fully fits in the receive window and the rcv_buf more strict. With increased use of HW aggregation a single "packet" can be multiple 100s of kB - Add MSG_MORE flag to optimize large TCP transmissions via sockmap, improves latency up to 33% for sockmap users - Convert TCP send queue handling from tasklet to BH workque - Improve BPF iteration over TCP sockets to see each socket exactly once - Remove obsolete and unused TCP RFC3517/RFC6675 loss recovery code - Support enabling kernel threads for NAPI processing on per-NAPI instance basis rather than a whole device. Fully stop the kernel NAPI thread when threaded NAPI gets disabled. Previously thread would stick around until ifdown due to tricky synchronization - Allow multicast routing to take effect on locally-generated packets - Add output interface argument for End.X in segment routing - MCTP: add support for gateway routing, improve bind() handling - Don't require rtnl_lock when fetching an IPv6 neighbor over Netlink - Add a new neighbor flag ("extern_valid"), which cedes refresh responsibilities to userspace. This is needed for EVPN multi-homing where a neighbor entry for a multi-homed host needs to be synced across all the VTEPs among which the host is multi-homed - Support NUD_PERMANENT for proxy neighbor entries - Add a new queuing discipline for IETF RFC9332 DualQ Coupled AQM - Add sequence numbers to netconsole messages. Unregister netconsole's console when all net targets are removed. Code refactoring. Add a number of selftests - Align IPSec inbound SA lookup to RFC 4301. Only SPI and protocol should be used for an inbound SA lookup - Support inspecting ref_tracker state via DebugFS - Don't force bonding advertisement frames tx to ~333 ms boundaries. Add broadcast_neighbor option to send ARP/ND on all bonded links - Allow providing upcall pid for the 'execute' command in openvswitch - Remove DCCP support from Netfilter's conntrack - Disallow multiple packet duplications in the queuing layer - Prevent use of deprecated iptables code on PREEMPT_RT Driver API: - Support RSS and hashing configuration over ethtool Netlink - Add dedicated ethtool callbacks for getting and setting hashing fields - Add support for power budget evaluation strategy in PSE / Power-over-Ethernet. Generate Netlink events for overcurrent etc - Support DPLL phase offset monitoring across all device inputs. Support providing clock reference and SYNC over separate DPLL inputs - Support traffic classes in devlink rate API for bandwidth management - Remove rtnl_lock dependency from UDP tunnel port configuration Device drivers: - Add a new Broadcom driver for 800G Ethernet (bnge) - Add a standalone driver for Microchip ZL3073x DPLL - Remove IBM's NETIUCV device driver - Ethernet high-speed NICs: - Broadcom (bnxt): - support zero-copy Tx of DMABUF memory - take page size into account for page pool recycling rings - Intel (100G, ice, idpf): - idpf: XDP and AF_XDP support preparations - idpf: add flow steering - add link_down_events statistic - clean up the TSPLL code - preparations for live VM migration - nVidia/Mellanox: - support zero-copy Rx/Tx interfaces (DMABUF and io_uring) - optimize context memory usage for matchers - expose serial numbers in devlink info - support PCIe congestion metrics - Meta (fbnic): - add 25G, 50G, and 100G link modes to phylink - support dumping FW logs - Marvell/Cavium: - support for CN20K generation of the Octeon chips - Amazon: - add HW clock (without timestamping, just hypervisor time access) - Ethernet virtual: - VirtIO net: - support segmentation of UDP-tunnel-encapsulated packets - Google (gve): - support packet timestamping and clock synchronization - Microsoft vNIC: - add handler for device-originated servicing events - allow dynamic MSI-X vector allocation - support Tx bandwidth clamping - Ethernet NICs consumer, and embedded: - AMD: - amd-xgbe: hardware timestamping and PTP clock support - Broadcom integrated MACs (bcmgenet, bcmasp): - use napi_complete_done() return value to support NAPI polling - add support for re-starting auto-negotiation - Broadcom switches (b53): - support BCM5325 switches - add bcm63xx EPHY power control - Synopsys (stmmac): - lots of code refactoring and cleanups - TI: - icssg-prueth: read firmware-names from device tree - icssg: PRP offload support - Microchip: - lan78xx: convert to PHYLINK for improved PHY and MAC management - ksz: add KSZ8463 switch support - Intel: - support similar queue priority scheme in multi-queue and time-sensitive networking (taprio) - support packet pre-emption in both - RealTek (r8169): - enable EEE at 5Gbps on RTL8126 - Airoha: - add PPPoE offload support - MDIO bus controller for Airoha AN7583 - Ethernet PHYs: - support for the IPQ5018 internal GE PHY - micrel KSZ9477 switch-integrated PHYs: - add MDI/MDI-X control support - add RX error counters - add cable test support - add Signal Quality Indicator (SQI) reporting - dp83tg720: improve reset handling and reduce link recovery time - support bcm54811 (and its MII-Lite interface type) - air_en8811h: support resume/suspend - support PHY counters for QCA807x and QCA808x - support WoL for QCA807x - CAN drivers: - rcar_canfd: support for Transceiver Delay Compensation - kvaser: report FW versions via devlink dev info - WiFi: - extended regulatory info support (6 GHz) - add statistics and beacon monitor for Multi-Link Operation (MLO) - support S1G aggregation, improve S1G support - add Radio Measurement action fields - support per-radio RTS threshold - some work around how FIPS affects wifi, which was wrong (RC4 is used by TKIP, not only WEP) - improvements for unsolicited probe response handling - WiFi drivers: - RealTek (rtw88): - IBSS mode for SDIO devices - RealTek (rtw89): - BT coexistence for MLO/WiFi7 - concurrent station + P2P support - support for USB devices RTL8851BU/RTL8852BU - Intel (iwlwifi): - use embedded PNVM in (to be released) FW images to fix compatibility issues - many cleanups (unused FW APIs, PCIe code, WoWLAN) - some FIPS interoperability - MediaTek (mt76): - firmware recovery improvements - more MLO work - Qualcomm/Atheros (ath12k): - fix scan on multi-radio devices - more EHT/Wi-Fi 7 features - encapsulation/decapsulation offload - Broadcom (brcm80211): - support SDIO 43751 device - Bluetooth: - hci_event: add support for handling LE BIG Sync Lost event - ISO: add socket option to report packet seqnum via CMSG - ISO: support SCM_TIMESTAMPING for ISO TS - Bluetooth drivers: - intel_pcie: support Function Level Reset - nxpuart: add support for 4M baudrate - nxpuart: implement powerup sequence, reset, FW dump, and FW loading" * tag 'net-next-6.17' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1742 commits) dpll: zl3073x: Fix build failure selftests: bpf: fix legacy netfilter options ipv6: annotate data-races around rt->fib6_nsiblings ipv6: fix possible infinite loop in fib6_info_uses_dev() ipv6: prevent infinite loop in rt6_nlmsg_size() ipv6: add a retry logic in net6_rt_notify() vrf: Drop existing dst reference in vrf_ip6_input_dst net/sched: taprio: align entry index attr validation with mqprio net: fsl_pq_mdio: use dev_err_probe selftests: rtnetlink.sh: remove esp4_offload after test vsock: remove unnecessary null check in vsock_getname() igb: xsk: solve negative overflow of nb_pkts in zerocopy mode stmmac: xsk: fix negative overflow of budget in zerocopy mode dt-bindings: ieee802154: Convert at86rf230.txt yaml format net: dsa: microchip: Disable PTP function of KSZ8463 net: dsa: microchip: Setup fiber ports for KSZ8463 net: dsa: microchip: Write switch MAC address differently for KSZ8463 net: dsa: microchip: Use different registers for KSZ8463 net: dsa: microchip: Add KSZ8463 switch support to KSZ DSA driver dt-bindings: net: dsa: microchip: Add KSZ8463 switch support ...
2025-07-29Merge tag 'timers-cleanups-2025-07-27' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull timer cleanups from Thomas Gleixner: "A treewide cleanup of struct cycle_counter const annotations. The initial idea of making them const was correct as they were seperate instances. When they got embedded into larger data structures, which are even modified by the callback this got moot. The only reason why this went unnoticed is that the required container_of() casts the const attribute forcefully away. Stop pretending that it is const" * tag 'timers-cleanups-2025-07-27' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: time/timecounter: Fix the lie that struct cyclecounter is const
2025-07-17Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski
Cross-merge networking fixes after downstream PR (net-6.16-rc7). Conflicts: Documentation/netlink/specs/ovpn.yaml 880d43ca9aa4 ("netlink: specs: clean up spaces in brackets") af52020fc599 ("ovpn: reject unexpected netlink attributes") drivers/net/phy/phy_device.c a44312d58e78 ("net: phy: Don't register LEDs for genphy") f0f2b992d818 ("net: phy: Don't register LEDs for genphy") https://lore.kernel.org/20250710114926.7ec3a64f@kernel.org drivers/net/wireless/intel/iwlwifi/fw/regulatory.c drivers/net/wireless/intel/iwlwifi/mld/regulatory.c 5fde0fcbd760 ("wifi: iwlwifi: mask reserved bits in chan_state_active_bitmap") ea045a0de3b9 ("wifi: iwlwifi: add support for accepting raw DSM tables by firmware") net/ipv6/mcast.c ae3264a25a46 ("ipv6: mcast: Delay put pmc->idev in mld_del_delrec()") a8594c956cc9 ("ipv6: mcast: Avoid a duplicate pointer check in mld_del_delrec()") https://lore.kernel.org/8cc52891-3653-4b03-a45e-05464fe495cf@kernel.org No adjacent changes. Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-07-15net: libwx: fix multicast packets received countJiawen Wu
Multicast good packets received by PF rings that pass ethternet MAC address filtering are counted for rtnl_link_stats64.multicast. The counter is not cleared on read. Fix the duplicate counting on updating statistics. Fixes: 46b92e10d631 ("net: libwx: support hardware statistics") Cc: stable@vger.kernel.org Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://patch.msgid.link/DA229A4F58B70E51+20250714015656.91772-1-jiawenwu@trustnetic.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-07-15net: libwx: properly reset Rx ring descriptorJiawen Wu
When device reset is triggered by feature changes such as toggling Rx VLAN offload, wx->do_reset() is called to reinitialize Rx rings. The hardware descriptor ring may retain stale values from previous sessions. And only set the length to 0 in rx_desc[0] would result in building malformed SKBs. Fix it to ensure a clean slate after device reset. [ 549.186435] [ C16] ------------[ cut here ]------------ [ 549.186457] [ C16] kernel BUG at net/core/skbuff.c:2814! [ 549.186468] [ C16] Oops: invalid opcode: 0000 [#1] SMP NOPTI [ 549.186472] [ C16] CPU: 16 UID: 0 PID: 0 Comm: swapper/16 Kdump: loaded Not tainted 6.16.0-rc4+ #23 PREEMPT(voluntary) [ 549.186476] [ C16] Hardware name: Micro-Star International Co., Ltd. MS-7E16/X670E GAMING PLUS WIFI (MS-7E16), BIOS 1.90 12/31/2024 [ 549.186478] [ C16] RIP: 0010:__pskb_pull_tail+0x3ff/0x510 [ 549.186484] [ C16] Code: 06 f0 ff 4f 34 74 7b 4d 8b 8c 24 c8 00 00 00 45 8b 84 24 c0 00 00 00 e9 c8 fd ff ff 48 c7 44 24 08 00 00 00 00 e9 5e fe ff ff <0f> 0b 31 c0 e9 23 90 5b ff 41 f7 c6 ff 0f 00 00 75 bf 49 8b 06 a8 [ 549.186487] [ C16] RSP: 0018:ffffb391c0640d70 EFLAGS: 00010282 [ 549.186490] [ C16] RAX: 00000000fffffff2 RBX: ffff8fe7e4d40200 RCX: 00000000fffffff2 [ 549.186492] [ C16] RDX: ffff8fe7c3a4bf8e RSI: 0000000000000180 RDI: ffff8fe7c3a4bf40 [ 549.186494] [ C16] RBP: ffffb391c0640da8 R08: ffff8fe7c3a4c0c0 R09: 000000000000000e [ 549.186496] [ C16] R10: ffffb391c0640d88 R11: 000000000000000e R12: ffff8fe7e4d40200 [ 549.186497] [ C16] R13: 00000000fffffff2 R14: ffff8fe7fa01a000 R15: 00000000fffffff2 [ 549.186499] [ C16] FS: 0000000000000000(0000) GS:ffff8fef5ae40000(0000) knlGS:0000000000000000 [ 549.186502] [ C16] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 549.186503] [ C16] CR2: 00007f77d81d6000 CR3: 000000051a032000 CR4: 0000000000750ef0 [ 549.186505] [ C16] PKRU: 55555554 [ 549.186507] [ C16] Call Trace: [ 549.186510] [ C16] <IRQ> [ 549.186513] [ C16] ? srso_alias_return_thunk+0x5/0xfbef5 [ 549.186517] [ C16] __skb_pad+0xc7/0xf0 [ 549.186523] [ C16] wx_clean_rx_irq+0x355/0x3b0 [libwx] [ 549.186533] [ C16] wx_poll+0x92/0x120 [libwx] [ 549.186540] [ C16] __napi_poll+0x28/0x190 [ 549.186544] [ C16] net_rx_action+0x301/0x3f0 [ 549.186548] [ C16] ? srso_alias_return_thunk+0x5/0xfbef5 [ 549.186551] [ C16] ? __raw_spin_lock_irqsave+0x1e/0x50 [ 549.186554] [ C16] ? srso_alias_return_thunk+0x5/0xfbef5 [ 549.186557] [ C16] ? wake_up_nohz_cpu+0x35/0x160 [ 549.186559] [ C16] ? srso_alias_return_thunk+0x5/0xfbef5 [ 549.186563] [ C16] handle_softirqs+0xf9/0x2c0 [ 549.186568] [ C16] __irq_exit_rcu+0xc7/0x130 [ 549.186572] [ C16] common_interrupt+0xb8/0xd0 [ 549.186576] [ C16] </IRQ> [ 549.186577] [ C16] <TASK> [ 549.186579] [ C16] asm_common_interrupt+0x22/0x40 [ 549.186582] [ C16] RIP: 0010:cpuidle_enter_state+0xc2/0x420 [ 549.186585] [ C16] Code: 00 00 e8 11 0e 5e ff e8 ac f0 ff ff 49 89 c5 0f 1f 44 00 00 31 ff e8 0d ed 5c ff 45 84 ff 0f 85 40 02 00 00 fb 0f 1f 44 00 00 <45> 85 f6 0f 88 84 01 00 00 49 63 d6 48 8d 04 52 48 8d 04 82 49 8d [ 549.186587] [ C16] RSP: 0018:ffffb391c0277e78 EFLAGS: 00000246 [ 549.186590] [ C16] RAX: ffff8fef5ae40000 RBX: 0000000000000003 RCX: 0000000000000000 [ 549.186591] [ C16] RDX: 0000007fde0faac5 RSI: ffffffff826e53f6 RDI: ffffffff826fa9b3 [ 549.186593] [ C16] RBP: ffff8fe7c3a20800 R08: 0000000000000002 R09: 0000000000000000 [ 549.186595] [ C16] R10: 0000000000000000 R11: 000000000000ffff R12: ffffffff82ed7a40 [ 549.186596] [ C16] R13: 0000007fde0faac5 R14: 0000000000000003 R15: 0000000000000000 [ 549.186601] [ C16] ? cpuidle_enter_state+0xb3/0x420 [ 549.186605] [ C16] cpuidle_enter+0x29/0x40 [ 549.186609] [ C16] cpuidle_idle_call+0xfd/0x170 [ 549.186613] [ C16] do_idle+0x7a/0xc0 [ 549.186616] [ C16] cpu_startup_entry+0x25/0x30 [ 549.186618] [ C16] start_secondary+0x117/0x140 [ 549.186623] [ C16] common_startup_64+0x13e/0x148 [ 549.186628] [ C16] </TASK> Fixes: 3c47e8ae113a ("net: libwx: Support to receive packets in NAPI") Cc: stable@vger.kernel.org Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://patch.msgid.link/20250714024755.17512-4-jiawenwu@trustnetic.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-07-15net: libwx: fix the using of Rx buffer DMAJiawen Wu
The wx_rx_buffer structure contained two DMA address fields: 'dma' and 'page_dma'. However, only 'page_dma' was actually initialized and used to program the Rx descriptor. But 'dma' was uninitialized and used in some paths. This could lead to undefined behavior, including DMA errors or use-after-free, if the uninitialized 'dma' was used. Althrough such error has not yet occurred, it is worth fixing in the code. Fixes: 3c47e8ae113a ("net: libwx: Support to receive packets in NAPI") Cc: stable@vger.kernel.org Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://patch.msgid.link/20250714024755.17512-3-jiawenwu@trustnetic.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-07-15net: libwx: remove duplicate page_pool_put_full_page()Jiawen Wu
page_pool_put_full_page() should only be invoked when freeing Rx buffers or building a skb if the size is too short. At other times, the pages need to be reused. So remove the redundant page put. In the original code, double free pages cause kernel panic: [ 876.949834] __irq_exit_rcu+0xc7/0x130 [ 876.949836] common_interrupt+0xb8/0xd0 [ 876.949838] </IRQ> [ 876.949838] <TASK> [ 876.949840] asm_common_interrupt+0x22/0x40 [ 876.949841] RIP: 0010:cpuidle_enter_state+0xc2/0x420 [ 876.949843] Code: 00 00 e8 d1 1d 5e ff e8 ac f0 ff ff 49 89 c5 0f 1f 44 00 00 31 ff e8 cd fc 5c ff 45 84 ff 0f 85 40 02 00 00 fb 0f 1f 44 00 00 <45> 85 f6 0f 88 84 01 00 00 49 63 d6 48 8d 04 52 48 8d 04 82 49 8d [ 876.949844] RSP: 0018:ffffaa7340267e78 EFLAGS: 00000246 [ 876.949845] RAX: ffff9e3f135be000 RBX: 0000000000000002 RCX: 0000000000000000 [ 876.949846] RDX: 000000cc2dc4cb7c RSI: ffffffff89ee49ae RDI: ffffffff89ef9f9e [ 876.949847] RBP: ffff9e378f940800 R08: 0000000000000002 R09: 00000000000000ed [ 876.949848] R10: 000000000000afc8 R11: ffff9e3e9e5a9b6c R12: ffffffff8a6d8580 [ 876.949849] R13: 000000cc2dc4cb7c R14: 0000000000000002 R15: 0000000000000000 [ 876.949852] ? cpuidle_enter_state+0xb3/0x420 [ 876.949855] cpuidle_enter+0x29/0x40 [ 876.949857] cpuidle_idle_call+0xfd/0x170 [ 876.949859] do_idle+0x7a/0xc0 [ 876.949861] cpu_startup_entry+0x25/0x30 [ 876.949862] start_secondary+0x117/0x140 [ 876.949864] common_startup_64+0x13e/0x148 [ 876.949867] </TASK> [ 876.949868] ---[ end trace 0000000000000000 ]--- [ 876.949869] ------------[ cut here ]------------ [ 876.949870] list_del corruption, ffffead40445a348->next is NULL [ 876.949873] WARNING: CPU: 14 PID: 0 at lib/list_debug.c:52 __list_del_entry_valid_or_report+0x67/0x120 [ 876.949875] Modules linked in: snd_hrtimer(E) bnep(E) binfmt_misc(E) amdgpu(E) squashfs(E) vfat(E) loop(E) fat(E) amd_atl(E) snd_hda_codec_realtek(E) intel_rapl_msr(E) snd_hda_codec_generic(E) intel_rapl_common(E) snd_hda_scodec_component(E) snd_hda_codec_hdmi(E) snd_hda_intel(E) edac_mce_amd(E) snd_intel_dspcfg(E) snd_hda_codec(E) snd_hda_core(E) amdxcp(E) kvm_amd(E) snd_hwdep(E) gpu_sched(E) drm_panel_backlight_quirks(E) cec(E) snd_pcm(E) drm_buddy(E) snd_seq_dummy(E) drm_ttm_helper(E) btusb(E) kvm(E) snd_seq_oss(E) btrtl(E) ttm(E) btintel(E) snd_seq_midi(E) btbcm(E) drm_exec(E) snd_seq_midi_event(E) i2c_algo_bit(E) snd_rawmidi(E) bluetooth(E) drm_suballoc_helper(E) irqbypass(E) snd_seq(E) ghash_clmulni_intel(E) sha512_ssse3(E) drm_display_helper(E) aesni_intel(E) snd_seq_device(E) rfkill(E) snd_timer(E) gf128mul(E) drm_client_lib(E) drm_kms_helper(E) snd(E) i2c_piix4(E) joydev(E) soundcore(E) wmi_bmof(E) ccp(E) k10temp(E) i2c_smbus(E) gpio_amdpt(E) i2c_designware_platform(E) gpio_generic(E) sg(E) [ 876.949914] i2c_designware_core(E) sch_fq_codel(E) parport_pc(E) drm(E) ppdev(E) lp(E) parport(E) fuse(E) nfnetlink(E) ip_tables(E) ext4 crc16 mbcache jbd2 sd_mod sfp mdio_i2c i2c_core txgbe ahci ngbe pcs_xpcs libahci libwx r8169 phylink libata realtek ptp pps_core video wmi [ 876.949933] CPU: 14 UID: 0 PID: 0 Comm: swapper/14 Kdump: loaded Tainted: G W E 6.16.0-rc2+ #20 PREEMPT(voluntary) [ 876.949935] Tainted: [W]=WARN, [E]=UNSIGNED_MODULE [ 876.949936] Hardware name: Micro-Star International Co., Ltd. MS-7E16/X670E GAMING PLUS WIFI (MS-7E16), BIOS 1.90 12/31/2024 [ 876.949936] RIP: 0010:__list_del_entry_valid_or_report+0x67/0x120 [ 876.949938] Code: 00 00 00 48 39 7d 08 0f 85 a6 00 00 00 5b b8 01 00 00 00 5d 41 5c e9 73 0d 93 ff 48 89 fe 48 c7 c7 a0 31 e8 89 e8 59 7c b3 ff <0f> 0b 31 c0 5b 5d 41 5c e9 57 0d 93 ff 48 89 fe 48 c7 c7 c8 31 e8 [ 876.949940] RSP: 0018:ffffaa73405d0c60 EFLAGS: 00010282 [ 876.949941] RAX: 0000000000000000 RBX: ffffead40445a348 RCX: 0000000000000000 [ 876.949942] RDX: 0000000000000105 RSI: 0000000000000001 RDI: 00000000ffffffff [ 876.949943] RBP: 0000000000000000 R08: 000000010006dfde R09: ffffffff8a47d150 [ 876.949944] R10: ffffffff8a47d150 R11: 0000000000000003 R12: dead000000000122 [ 876.949945] R13: ffff9e3e9e5af700 R14: ffffead40445a348 R15: ffff9e3e9e5af720 [ 876.949946] FS: 0000000000000000(0000) GS:ffff9e3f135be000(0000) knlGS:0000000000000000 [ 876.949947] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 876.949948] CR2: 00007fa58b480048 CR3: 0000000156724000 CR4: 0000000000750ef0 [ 876.949949] PKRU: 55555554 [ 876.949950] Call Trace: [ 876.949951] <IRQ> [ 876.949952] __rmqueue_pcplist+0x53/0x2c0 [ 876.949955] alloc_pages_bulk_noprof+0x2e0/0x660 [ 876.949958] __page_pool_alloc_pages_slow+0xa9/0x400 [ 876.949961] page_pool_alloc_pages+0xa/0x20 [ 876.949963] wx_alloc_rx_buffers+0xd7/0x110 [libwx] [ 876.949967] wx_clean_rx_irq+0x262/0x430 [libwx] [ 876.949971] wx_poll+0x92/0x130 [libwx] [ 876.949975] __napi_poll+0x28/0x190 [ 876.949977] net_rx_action+0x301/0x3f0 [ 876.949980] ? srso_alias_return_thunk+0x5/0xfbef5 [ 876.949981] ? profile_tick+0x30/0x70 [ 876.949983] ? srso_alias_return_thunk+0x5/0xfbef5 [ 876.949984] ? srso_alias_return_thunk+0x5/0xfbef5 [ 876.949986] ? timerqueue_add+0xa3/0xc0 [ 876.949988] ? srso_alias_return_thunk+0x5/0xfbef5 [ 876.949989] ? __raise_softirq_irqoff+0x16/0x70 [ 876.949991] ? srso_alias_return_thunk+0x5/0xfbef5 [ 876.949993] ? srso_alias_return_thunk+0x5/0xfbef5 [ 876.949994] ? wx_msix_clean_rings+0x41/0x50 [libwx] [ 876.949998] handle_softirqs+0xf9/0x2c0 Fixes: 3c47e8ae113a ("net: libwx: Support to receive packets in NAPI") Cc: stable@vger.kernel.org Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://patch.msgid.link/20250714024755.17512-2-jiawenwu@trustnetic.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-07-09net: txgbevf: add link update flowMengyuan Lou
Add link update flow to wangxun 10/25/40G virtual functions. Get link status from pf in mbox, and if it is failed then check the vx_status, because vx_status switching is too slow. Signed-off-by: Mengyuan Lou <mengyuanlou@net-swift.com> Link: https://patch.msgid.link/20250704094923.652-9-mengyuanlou@net-swift.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-07-09net: txgbevf: Support Rx and Tx process pathMengyuan Lou
Improve the configuration of Rx and Tx ring. Setup and alloc resources. Configure Rx and Tx unit on hardware. Add .ndo_start_xmit support and start all queues. Signed-off-by: Mengyuan Lou <mengyuanlou@net-swift.com> Link: https://patch.msgid.link/20250704094923.652-8-mengyuanlou@net-swift.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-07-09net: txgbevf: init interrupts and request irqsMengyuan Lou
Add irq alloc flow functions for vf. Alloc pcie msix irqs for drivers and request_irq for tx/rx rings and misc other events. If the application is successful, config vertors for interrupts. Enable interrupts mask in wxvf_irq_enable. Signed-off-by: Mengyuan Lou <mengyuanlou@net-swift.com> Link: https://patch.msgid.link/20250704094923.652-7-mengyuanlou@net-swift.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-07-09net: txgbevf: add sw init pci info and reset hardwareMengyuan Lou
Add sw init and reset hw for txgbevf virtual functions which initialize basic parameters, and then register netdev. Signed-off-by: Mengyuan Lou <mengyuanlou@net-swift.com> Link: https://patch.msgid.link/20250704094923.652-6-mengyuanlou@net-swift.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-07-09net: wangxun: add txgbevf buildMengyuan Lou
Add doc build infrastructure for txgbevf driver. Implement the basic PCI driver loading and unloading interface. Initialize the id_table which support 10/25/40G virtual functions for Wangxun. Ioremap the space of bar0 and bar4 which will be used. Signed-off-by: Mengyuan Lou <mengyuanlou@net-swift.com> Link: https://patch.msgid.link/20250704094923.652-5-mengyuanlou@net-swift.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-07-09net: libwx: add wangxun vf common apiMengyuan Lou
Add common wx_configure_vf and wx_set_mac_vf for ngbevf and txgbevf. Signed-off-by: Mengyuan Lou <mengyuanlou@net-swift.com> Link: https://patch.msgid.link/20250704094923.652-4-mengyuanlou@net-swift.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-07-09net: libwx: add base vf api for vf driversMengyuan Lou
Implement mbox_write_and_read_ack functions which are used to set basic functions like set_mac, get_link.etc for vf. Signed-off-by: Mengyuan Lou <mengyuanlou@net-swift.com> Link: https://patch.msgid.link/20250704094923.652-3-mengyuanlou@net-swift.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-07-09net: libwx: add mailbox api for wangxun vf driversMengyuan Lou
Implements the mailbox interfaces for Wangxun vf drivers which will be used in txgbevf and ngbevf. Signed-off-by: Mengyuan Lou <mengyuanlou@net-swift.com> Link: https://patch.msgid.link/20250704094923.652-2-mengyuanlou@net-swift.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-07-03net: ngbe: specify IRQ vector when the number of VFs is 7Jiawen Wu
For NGBE devices, the queue number is limited to be 1 when SRIOV is enabled. In this case, IRQ vector[0] is used for MISC and vector[1] is used for queue, based on the previous patches. But for the hardware design, the IRQ vector[1] must be allocated for use by the VF[6] when the number of VFs is 7. So the IRQ vector[0] should be shared for PF MISC and QUEUE interrupts. +-----------+----------------------+ | Vector | Assigned To | +-----------+----------------------+ | Vector 0 | PF MISC and QUEUE | | Vector 1 | VF 6 | | Vector 2 | VF 5 | | Vector 3 | VF 4 | | Vector 4 | VF 3 | | Vector 5 | VF 2 | | Vector 6 | VF 1 | | Vector 7 | VF 0 | +-----------+----------------------+ Minimize code modifications, only adjust the IRQ vector number for this case. Fixes: 877253d2cbf2 ("net: ngbe: add sriov function support") Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com> Reviewed-by: Larysa Zaremba <larysa.zaremba@intel.com> Link: https://patch.msgid.link/20250701063030.59340-4-jiawenwu@trustnetic.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-07-03net: wangxun: revert the adjustment of the IRQ vector sequenceJiawen Wu
Due to hardware limitations of NGBE, queue IRQs can only be requested on vector 0 to 7. When the number of queues is set to the maximum 8, the PCI IRQ vectors are allocated from 0 to 8. The vector 0 is used by MISC interrupt, and althrough the vector 8 is used by queue interrupt, it is unable to receive packets. This will cause some packets to be dropped when RSS is enabled and they are assigned to queue 8. So revert the adjustment of the MISC IRQ location, to make it be the last one in IRQ vectors. Fixes: 937d46ecc5f9 ("net: wangxun: add ethtool_ops for channel number") Cc: stable@vger.kernel.org Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com> Reviewed-by: Larysa Zaremba <larysa.zaremba@intel.com> Link: https://patch.msgid.link/20250701063030.59340-3-jiawenwu@trustnetic.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-07-02net: libwx: fix the incorrect display of the queue numberJiawen Wu
When setting "ethtool -L eth0 combined 1", the number of RX/TX queue is changed to be 1. RSS is disabled at this moment, and the indices of FDIR have not be changed in wx_set_rss_queues(). So the combined count still shows the previous value. This issue was introduced when supporting FDIR. Fix it for those devices that support FDIR. Fixes: 34744a7749b3 ("net: txgbe: add FDIR info to ethtool ops") Cc: stable@vger.kernel.org Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://patch.msgid.link/A5C8FE56D6C04608+20250701070625.73680-1-jiawenwu@trustnetic.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-07-01time/timecounter: Fix the lie that struct cyclecounter is constGreg Kroah-Hartman
In both the read callback for struct cyclecounter, and in struct timecounter, struct cyclecounter is declared as a const pointer. Unfortunatly, a number of users of this pointer treat it as a non-const pointer as it is burried in a larger structure that is heavily modified by the callback function when accessed. This lie had been hidden by the fact that container_of() "casts away" a const attribute of a pointer without any compiler warning happening at all. Fix this all up by removing the const attribute in the needed places so that everyone can see that the structure really isn't const, but can, and is, modified by the users of it. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Link: https://lore.kernel.org/all/2025070124-backyard-hurt-783a@gregkh
2025-06-26net: libwx: fix the creation of page_poolJiawen Wu
'rx_ring->size' means the count of ring descriptors multiplied by the size of one descriptor. When increasing the count of ring descriptors, it may exceed the limit of pool size. [ 864.209610] page_pool_create_percpu() gave up with errno -7 [ 864.209613] txgbe 0000:11:00.0: Page pool creation failed: -7 Fix to set the pool_size to the count of ring descriptors. Fixes: 850b971110b2 ("net: libwx: Allocate Rx and Tx resources") Cc: stable@vger.kernel.org Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com> Reviewed-by: Simon Horman <horms@kernel.org> Reviewed-by: Mina Almasry <almasrymina@google.com> Link: https://patch.msgid.link/434C72BFB40E350A+20250625023924.21821-1-jiawenwu@trustnetic.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-06-08treewide, timers: Rename from_timer() to timer_container_of()Ingo Molnar
Move this API to the canonical timer_*() namespace. [ tglx: Redone against pre rc1 ] Signed-off-by: Ingo Molnar <mingo@kernel.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Link: https://lore.kernel.org/all/aB2X0jCKQO56WdMt@gmail.com
2025-05-27net: libwx: Fix statistics of multicast packetsJiawen Wu
When SR-IOV is enabled, the number of multicast packets is mistakenly counted starting from queue 0. It would be a wrong count that includes the packets received on VF. Fix it to count from the correct offset. Fixes: c52d4b898901 ("net: libwx: Redesign flow when sriov is enabled") Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://patch.msgid.link/F70910CFE86C1F6F+20250523080438.27968-1-jiawenwu@trustnetic.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-05-26net: txgbe: Implement PTP for AML devicesJiawen Wu
Support PTP clock and 1PPS output signal for AML devices. Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com> Link: https://patch.msgid.link/F2F6E5E8899D2C20+20250521064402.22348-9-jiawenwu@trustnetic.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-05-26net: txgbe: Correct the currect link settingsJiawen Wu
For AML 25G/10G devices, some of the information returned from phylink_ethtool_ksettings_get() is not correct, since there is a fixed-link mode. So add additional corrections. Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://patch.msgid.link/C94BF867617C544D+20250521064402.22348-7-jiawenwu@trustnetic.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-05-26net: txgbe: Support to handle GPIO IRQs for AML devicesJiawen Wu
The driver needs to handle GPIO interrupts to identify SFP module and configure PHY by sending mailbox messages to firmware. Since the SFP module needs to wait for ready to get information when it is inserted, workqueue is added to handle delayed tasks. And each SW-FW interaction takes time to wait, so they are processed in the workqueue instead of IRQ handler function. Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://patch.msgid.link/399624AF221E8E28+20250521064402.22348-6-jiawenwu@trustnetic.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-05-26net: txgbe: Implement PHYLINK for AML 25G/10G devicesJiawen Wu
There is a new PHY attached to AML 25G/10G NIC, which is different from SP 10G/1G NIC. But the PHY configuration is handed over to firmware, and also I2C is controlled by firmware. So the different PHYLINK fixed-link mode is added for these devices. Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://patch.msgid.link/987B973A5929CD48+20250521064402.22348-5-jiawenwu@trustnetic.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-05-26net: txgbe: Distinguish between 40G and 25G devicesJiawen Wu
For the following patches to support PHYLINK for AML 25G devices, separate MAC type wx_mac_aml40 to maintain the driver of 40G devices. Because 40G devices will complete support later, not now. And this patch makes the 25G devices use some PHYLINK interfaces, but it is not yet create PHYLINK and cannot be used on its own. It is just preparation for the next patches. Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://patch.msgid.link/592B1A6920867D0C+20250521064402.22348-4-jiawenwu@trustnetic.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-05-26net: wangxun: Use specific flag bit to simplify the codeJiawen Wu
Most of the different code that requires MAC type in the common library is due to NGBE only supports a few queues and pools, unlike TXGBE, which supports 128 queues and 64 pools. This difference accounts for most of the hardware configuration differences in the driver code. So add a flag bit "WX_FLAG_MULTI_64_FUNC" for them to clean-up the driver code. Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://patch.msgid.link/C731132E124D75E5+20250521064402.22348-3-jiawenwu@trustnetic.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
generated by cgit v1.2.3 (git 2.46.0) at 2025-12-10 20:13:10 +0000