summaryrefslogtreecommitdiff
path: root/drivers/net/usb
AgeCommit message (Collapse)Author
2025-11-13net: usb: usbnet: adhere to styleOliver Neukum
This satisfies the coding style. Signed-off-by: Oliver Neukum <oneukum@suse.com> Link: https://patch.msgid.link/20251112102610.281565-1-oneukum@suse.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-11-10usbnet: Add support for Byte Queue Limits (BQL)Simon Schippers
In the current implementation, usbnet uses a fixed tx_qlen of: USB2: 60 * 1518 bytes = 91.08 KB USB3: 60 * 5 * 1518 bytes = 454.80 KB Such large transmit queues can be problematic, especially for cellular modems. For example, with a typical celluar link speed of 10 Mbit/s, a fully occupied USB3 transmit queue results in: 454.80 KB / (10 Mbit/s / 8 bit/byte) = 363.84 ms of additional latency. This patch adds support for Byte Queue Limits (BQL) [1] to dynamically manage the transmit queue size and reduce latency without sacrificing throughput. Testing was performed on various devices using the usbnet driver for packet transmission: - DELOCK 66045: USB3 to 2.5 GbE adapter (ax88179_178a) - DELOCK 61969: USB2 to 1 GbE adapter (asix) - Quectel RM520: 5G modem (qmi_wwan) - USB2 Android tethering (cdc_ncm) No performance degradation was observed for iperf3 TCP or UDP traffic, while latency for a prioritized ping application was significantly reduced. For example, using the USB3 to 2.5 GbE adapter, which was fully utilized by iperf3 UDP traffic, the prioritized ping was improved from 1.6 ms to 0.6 ms. With the same setup but with a 100 Mbit/s Ethernet connection, the prioritized ping was improved from 35 ms to 5 ms. [1] https://lwn.net/Articles/469652/ Signed-off-by: Simon Schippers <simon.schippers@tu-dortmund.de> Reviewed-by: Eric Dumazet <edumazet@google.com> Link: https://patch.msgid.link/20251106175615.26948-1-simon.schippers@tu-dortmund.de Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-11-06Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski
Cross-merge networking fixes after downstream PR (net-6.18-rc5). Conflicts: drivers/net/wireless/ath/ath12k/mac.c 9222582ec524 ("Revert "wifi: ath12k: Fix missing station power save configuration"") 6917e268c433 ("wifi: ath12k: Defer vdev bring-up until CSA finalize to avoid stale beacon") https://lore.kernel.org/11cece9f7e36c12efd732baa5718239b1bf8c950.camel@sipsolutions.net Adjacent changes: drivers/net/ethernet/intel/Kconfig b1d16f7c0063 ("libie: depend on DEBUG_FS when building LIBIE_FWLOG") 93f53db9f9dc ("ice: switch to Page Pool") Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-11-03net: usb: qmi_wwan: initialize MAC header offset in qmimux_rx_fixupQendrim Maxhuni
Raw IP packets have no MAC header, leaving skb->mac_header uninitialized. This can trigger kernel panics on ARM64 when xfrm or other subsystems access the offset due to strict alignment checks. Initialize the MAC header to prevent such crashes. This can trigger kernel panics on ARM when running IPsec over the qmimux0 interface. Example trace: Internal error: Oops: 000000009600004f [#1] SMP CPU: 0 UID: 0 PID: 0 Comm: swapper/0 Not tainted 6.12.34-gbe78e49cb433 #1 Hardware name: LS1028A RDB Board (DT) pstate: 60000005 (nZCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--) pc : xfrm_input+0xde8/0x1318 lr : xfrm_input+0x61c/0x1318 sp : ffff800080003b20 Call trace: xfrm_input+0xde8/0x1318 xfrm6_rcv+0x38/0x44 xfrm6_esp_rcv+0x48/0xa8 ip6_protocol_deliver_rcu+0x94/0x4b0 ip6_input_finish+0x44/0x70 ip6_input+0x44/0xc0 ipv6_rcv+0x6c/0x114 __netif_receive_skb_one_core+0x5c/0x8c __netif_receive_skb+0x18/0x60 process_backlog+0x78/0x17c __napi_poll+0x38/0x180 net_rx_action+0x168/0x2f0 Fixes: c6adf77953bc ("net: usb: qmi_wwan: add qmap mux protocol support") Signed-off-by: Qendrim Maxhuni <qendrim.maxhuni@garderos.com> Link: https://patch.msgid.link/20251029075744.105113-1-qendrim.maxhuni@garderos.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-10-31Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski
Cross-merge networking fixes after downstream PR (net-6.18-rc4). No conflicts, adjacent changes: drivers/net/ethernet/stmicro/stmmac/stmmac_main.c ded9813d17d3 ("net: stmmac: Consider Tx VLAN offload tag length for maxSDU") 26ab9830beab ("net: stmmac: replace has_xxxx with core_type") Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-10-29net: usb: asix_devices: Check return value of usbnet_get_endpointsMiaoqian Lin
The code did not check the return value of usbnet_get_endpoints. Add checks and return the error if it fails to transfer the error. Found via static anlaysis and this is similar to commit 07161b2416f7 ("sr9800: Add check for usbnet_get_endpoints"). Fixes: 933a27d39e0e ("USB: asix - Add AX88178 support and many other changes") Fixes: 2e55cc7210fe ("[PATCH] USB: usbnet (3/9) module for ASIX Ethernet adapters") Cc: stable@vger.kernel.org Signed-off-by: Miaoqian Lin <linmq006@gmail.com> Link: https://patch.msgid.link/20251026164318.57624-1-linmq006@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-10-24net: usb: usbnet: coding style for functionsOliver Neukum
Functions are not to have blanks between names and parameter lists. Remove them. Signed-off-by: Oliver Neukum <oneukum@suse.com> Link: https://patch.msgid.link/20251023100136.909118-1-oneukum@suse.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-10-23usbnet: Prevents free active keventLizhi Xu
The root cause of this issue are: 1. When probing the usbnet device, executing usbnet_link_change(dev, 0, 0); put the kevent work in global workqueue. However, the kevent has not yet been scheduled when the usbnet device is unregistered. Therefore, executing free_netdev() results in the "free active object (kevent)" error reported here. 2. Another factor is that when calling usbnet_disconnect()->unregister_netdev(), if the usbnet device is up, ndo_stop() is executed to cancel the kevent. However, because the device is not up, ndo_stop() is not executed. The solution to this problem is to cancel the kevent before executing free_netdev(). Fixes: a69e617e533e ("usbnet: Fix linkwatch use-after-free on disconnect") Reported-by: Sam Sun <samsun1006219@gmail.com> Closes: https://syzkaller.appspot.com/bug?extid=8bfd7bcc98f7300afb84 Signed-off-by: Lizhi Xu <lizhi.xu@windriver.com> Link: https://patch.msgid.link/20251022024007.1831898-1-lizhi.xu@windriver.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-10-23Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski
Cross-merge networking fixes after downstream PR (net-6.18-rc3). No conflicts or adjacent changes. Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-10-16net: usb: rtl8150: Fix frame paddingMichal Pecio
TX frames aren't padded and unknown memory is sent into the ether. Theoretically, it isn't even guaranteed that the extra memory exists and can be sent out, which could cause further problems. In practice, I found that plenty of tailroom exists in the skb itself (in my test with ping at least) and skb_padto() easily succeeds, so use it here. In the event of -ENOMEM drop the frame like other drivers do. The use of one more padding byte instead of a USB zero-length packet is retained to avoid regression. I have a dodgy Etron xHCI controller which doesn't seem to support sending ZLPs at all. Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Cc: stable@vger.kernel.org Signed-off-by: Michal Pecio <michal.pecio@gmail.com> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://patch.msgid.link/20251014203528.3f9783c4.michal.pecio@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-10-16Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski
Cross-merge networking fixes after downstream PR (net-6.18-rc2). No conflicts or adjacent changes. Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-10-15net: usb: lan78xx: fix use of improperly initialized dev->chipid in ↵I Viswanath
lan78xx_reset dev->chipid is used in lan78xx_init_mac_address before it's initialized: lan78xx_reset() { lan78xx_init_mac_address() lan78xx_read_eeprom() lan78xx_read_raw_eeprom() <- dev->chipid is used here dev->chipid = ... <- dev->chipid is initialized correctly here } Reorder initialization so that dev->chipid is set before calling lan78xx_init_mac_address(). Fixes: a0db7d10b76e ("lan78xx: Add to handle mux control per chip id") Signed-off-by: I Viswanath <viswanathiyyappan@gmail.com> Reviewed-by: Vadim Fedorenko <vadim.fedorenko@linux.dev> Reviewed-by: Khalid Aziz <khalid@kernel.org> Link: https://patch.msgid.link/20251013181648.35153-1-viswanathiyyappan@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-10-15r8152: Advertise software timestamp information.Abhishek Rawal
Driver calls skb_tx_timestamp(skb) in rtl8152_start_xmit(), but does not advertise the capability in ethtool. Advertise software timestamp capabilities on struct ethtool_ops. Signed-off-by: Abhishek Rawal <rawal.abhishek92@gmail.com> Reviewed-by: Jamie Bainbridge <jamie.bainbridge@gmail.com> Reviewed-by: Vadim Fedorenko <vadim.fedorenko@linux.dev> Link: https://patch.msgid.link/20251014055234.46527-1-rawal.abhishek92@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-10-14r8152: add error handling in rtl8152_driver_initYi Cong
rtl8152_driver_init() is missing the error handling. When rtl8152_driver registration fails, rtl8152_cfgselector_driver should be deregistered. Fixes: ec51fbd1b8a2 ("r8152: add USB device driver for config selection") Cc: stable@vger.kernel.org Signed-off-by: Yi Cong <yicong@kylinos.cn> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://patch.msgid.link/20251011082415.580740-1-yicongsrfy@163.com [pabeni@redhat.com: clarified the commit message] Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-10-14usbnet: Fix using smp_processor_id() in preemptible code warningsZqiang
Syzbot reported the following warning: BUG: using smp_processor_id() in preemptible [00000000] code: dhcpcd/2879 caller is usbnet_skb_return+0x74/0x490 drivers/net/usb/usbnet.c:331 CPU: 1 UID: 0 PID: 2879 Comm: dhcpcd Not tainted 6.15.0-rc4-syzkaller-00098-g615dca38c2ea #0 PREEMPT(voluntary) Call Trace: <TASK> __dump_stack lib/dump_stack.c:94 [inline] dump_stack_lvl+0x16c/0x1f0 lib/dump_stack.c:120 check_preemption_disabled+0xd0/0xe0 lib/smp_processor_id.c:49 usbnet_skb_return+0x74/0x490 drivers/net/usb/usbnet.c:331 usbnet_resume_rx+0x4b/0x170 drivers/net/usb/usbnet.c:708 usbnet_change_mtu+0x1be/0x220 drivers/net/usb/usbnet.c:417 __dev_set_mtu net/core/dev.c:9443 [inline] netif_set_mtu_ext+0x369/0x5c0 net/core/dev.c:9496 netif_set_mtu+0xb0/0x160 net/core/dev.c:9520 dev_set_mtu+0xae/0x170 net/core/dev_api.c:247 dev_ifsioc+0xa31/0x18d0 net/core/dev_ioctl.c:572 dev_ioctl+0x223/0x10e0 net/core/dev_ioctl.c:821 sock_do_ioctl+0x19d/0x280 net/socket.c:1204 sock_ioctl+0x42f/0x6a0 net/socket.c:1311 vfs_ioctl fs/ioctl.c:51 [inline] __do_sys_ioctl fs/ioctl.c:906 [inline] __se_sys_ioctl fs/ioctl.c:892 [inline] __x64_sys_ioctl+0x190/0x200 fs/ioctl.c:892 do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline] do_syscall_64+0xcd/0x260 arch/x86/entry/syscall_64.c:94 entry_SYSCALL_64_after_hwframe+0x77/0x7f For historical and portability reasons, the netif_rx() is usually run in the softirq or interrupt context, this commit therefore add local_bh_disable/enable() protection in the usbnet_resume_rx(). Fixes: 43daa96b166c ("usbnet: Stop RX Q on MTU change") Link: https://syzkaller.appspot.com/bug?id=81f55dfa587ee544baaaa5a359a060512228c1e1 Suggested-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Zqiang <qiang.zhang@linux.dev> Link: https://patch.msgid.link/20251011070518.7095-1-qiang.zhang@linux.dev Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-10-12net: usb: lan78xx: Fix lost EEPROM write timeout error(-ETIMEDOUT) in ↵Bhanu Seshu Kumar Valluri
lan78xx_write_raw_eeprom The function lan78xx_write_raw_eeprom failed to properly propagate EEPROM write timeout errors (-ETIMEDOUT). In the timeout fallthrough path, it first attempted to restore the pin configuration for LED outputs and then returned only the status of that restore operation, discarding the original timeout error saved in ret. As a result, callers could mistakenly treat EEPROM write operation as successful even though the EEPROM write had actually timed out with no or partial data write. To fix this, handle errors in restoring the LED pin configuration separately. If the restore succeeds, return any prior EEPROM write timeout error saved in ret to the caller. Suggested-by: Oleksij Rempel <o.rempel@pengutronix.de> Fixes: 8b1b2ca83b20 ("net: usb: lan78xx: Improve error handling in EEPROM and OTP operations") cc: stable@vger.kernel.org Signed-off-by: Bhanu Seshu Kumar Valluri <bhanuseshukumar@gmail.com> Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2025-10-07net: usb: asix: hold PM usage ref to avoid PM/MDIO + RTNL deadlockOleksij Rempel
Prevent USB runtime PM (autosuspend) for AX88772* in bind. usbnet enables runtime PM (autosuspend) by default, so disabling it via the usb_driver flag is ineffective. On AX88772B, autosuspend shows no measurable power saving with current driver (no link partner, admin up/down). The ~0.453 W -> ~0.248 W drop on v6.1 comes from phylib powering the PHY off on admin-down, not from USB autosuspend. The real hazard is that with runtime PM enabled, ndo_open() (under RTNL) may synchronously trigger autoresume (usb_autopm_get_interface()) into asix_resume() while the USB PM lock is held. Resume paths then invoke phylink/phylib and MDIO, which also expect RTNL, leading to possible deadlocks or PM lock vs MDIO wake issues. To avoid this, keep the device runtime-PM active by taking a usage reference in ax88772_bind() and dropping it in unbind(). A non-zero PM usage count blocks runtime suspend regardless of userspace policy (.../power/control - pm_runtime_allow/forbid), making this approach robust against sysfs overrides. Holding a runtime-PM usage ref does not affect system-wide suspend; system sleep/resume callbacks continue to run as before. Fixes: 4a2c7217cd5a ("net: usb: asix: ax88772: manage PHY PM from MAC") Reported-by: Hubert Wiśniewski <hubert.wisniewski.25632@gmail.com> Closes: https://lore.kernel.org/all/DCGHG5UJT9G3.2K1GHFZ3H87T0@gmail.com Tested-by: Hubert Wiśniewski <hubert.wisniewski.25632@gmail.com> Reported-by: Marek Szyprowski <m.szyprowski@samsung.com> Closes: https://lore.kernel.org/all/b5ea8296-f981-445d-a09a-2f389d7f6fdd@samsung.com Cc: stable@vger.kernel.org Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Link: https://patch.msgid.link/20251005081203.3067982-1-o.rempel@pengutronix.de Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-10-03net: usb: lan78xx: Fix lost EEPROM read timeout error(-ETIMEDOUT) in ↵Bhanu Seshu Kumar Valluri
lan78xx_read_raw_eeprom Syzbot reported read of uninitialized variable BUG with following call stack. lan78xx 8-1:1.0 (unnamed net_device) (uninitialized): EEPROM read operation timeout ===================================================== BUG: KMSAN: uninit-value in lan78xx_read_eeprom drivers/net/usb/lan78xx.c:1095 [inline] BUG: KMSAN: uninit-value in lan78xx_init_mac_address drivers/net/usb/lan78xx.c:1937 [inline] BUG: KMSAN: uninit-value in lan78xx_reset+0x999/0x2cd0 drivers/net/usb/lan78xx.c:3241 lan78xx_read_eeprom drivers/net/usb/lan78xx.c:1095 [inline] lan78xx_init_mac_address drivers/net/usb/lan78xx.c:1937 [inline] lan78xx_reset+0x999/0x2cd0 drivers/net/usb/lan78xx.c:3241 lan78xx_bind+0x711/0x1690 drivers/net/usb/lan78xx.c:3766 lan78xx_probe+0x225c/0x3310 drivers/net/usb/lan78xx.c:4707 Local variable sig.i.i created at: lan78xx_read_eeprom drivers/net/usb/lan78xx.c:1092 [inline] lan78xx_init_mac_address drivers/net/usb/lan78xx.c:1937 [inline] lan78xx_reset+0x77e/0x2cd0 drivers/net/usb/lan78xx.c:3241 lan78xx_bind+0x711/0x1690 drivers/net/usb/lan78xx.c:3766 The function lan78xx_read_raw_eeprom failed to properly propagate EEPROM read timeout errors (-ETIMEDOUT). In the fallthrough path, it first attempted to restore the pin configuration for LED outputs and then returned only the status of that restore operation, discarding the original timeout error. As a result, callers could mistakenly treat the data buffer as valid even though the EEPROM read had actually timed out with no data or partial data. To fix this, handle errors in restoring the LED pin configuration separately. If the restore succeeds, return any prior EEPROM timeout error correctly to the caller. Reported-by: syzbot+62ec8226f01cb4ca19d9@syzkaller.appspotmail.com Closes: https://syzkaller.appspot.com/bug?extid=62ec8226f01cb4ca19d9 Fixes: 8b1b2ca83b20 ("net: usb: lan78xx: Improve error handling in EEPROM and OTP operations") Signed-off-by: Bhanu Seshu Kumar Valluri <bhanuseshukumar@gmail.com> Reviewed-by: Oleksij Rempel <o.rempel@pengutronix.de> Link: https://patch.msgid.link/20250930084902.19062-1-bhanuseshukumar@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-10-01Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netPaolo Abeni
Cross-merge networking fixes after downstream PR (net-6.17-rc8). Conflicts: tools/testing/selftests/drivers/net/bonding/Makefile 87951b566446 selftests: bonding: add test for passive LACP mode c2377f1763e9 selftests: bonding: add test for LACP actor port priority Adjacent changes: drivers/net/ethernet/cadence/macb.h fca3dc859b20 net: macb: remove illusion about TBQPH/RBQPH being per-queue 89934dbf169e net: macb: Add TAPRIO traffic scheduling support drivers/net/ethernet/cadence/macb_main.c fca3dc859b20 net: macb: remove illusion about TBQPH/RBQPH being per-queue 89934dbf169e net: macb: Add TAPRIO traffic scheduling support Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-09-26net: usb: Remove disruptive netif_wake_queue in rtl8150_set_multicastI Viswanath
syzbot reported WARNING in rtl8150_start_xmit/usb_submit_urb. This is the sequence of events that leads to the warning: rtl8150_start_xmit() { netif_stop_queue(); usb_submit_urb(dev->tx_urb); } rtl8150_set_multicast() { netif_stop_queue(); netif_wake_queue(); <-- wakes up TX queue before URB is done } rtl8150_start_xmit() { netif_stop_queue(); usb_submit_urb(dev->tx_urb); <-- double submission } rtl8150_set_multicast being the ndo_set_rx_mode callback should not be calling netif_stop_queue and notif_start_queue as these handle TX queue synchronization. The net core function dev_set_rx_mode handles the synchronization for rtl8150_set_multicast making it safe to remove these locks. Reported-and-tested-by: syzbot+78cae3f37c62ad092caa@syzkaller.appspotmail.com Closes: https://syzkaller.appspot.com/bug?extid=78cae3f37c62ad092caa Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Tested-by: Michal Pecio <michal.pecio@gmail.com> Signed-off-by: I Viswanath <viswanathiyyappan@gmail.com> Link: https://patch.msgid.link/20250924134350.264597-1-viswanathiyyappan@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-08-29Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski
Cross-merge networking fixes after downstream PR (net-6.17-rc4). No conflicts. Adjacent changes: drivers/net/ethernet/intel/idpf/idpf_txrx.c 02614eee26fb ("idpf: do not linearize big TSO packets") 6c4e68480238 ("idpf: remove obsolete stashing code") Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-08-26net: usb: qmi_wwan: add Telit Cinterion LE910C4-WWX new compositionsFabio Porcedda
Add the following Telit Cinterion LE910C4-WWX new compositions: 0x1034: tty (AT) + tty (AT) + rmnet T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 8 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=1bc7 ProdID=1034 Rev=00.00 S: Manufacturer=Telit S: Product=LE910C4-WWX S: SerialNumber=93f617e7 C: #Ifs= 3 Cfg#= 1 Atr=e0 MxPwr=500mA I: If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=option E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=81(I) Atr=03(Int.) MxPS= 64 Ivl=2ms E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I: If#= 1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=fe Prot=ff Driver=option E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=83(I) Atr=03(Int.) MxPS= 64 Ivl=2ms E: Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I: If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=qmi_wwan E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=85(I) Atr=03(Int.) MxPS= 64 Ivl=2ms E: Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms 0x1037: tty (diag) + tty (Telit custom) + tty (AT) + tty (AT) + rmnet T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 15 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=1bc7 ProdID=1037 Rev=00.00 S: Manufacturer=Telit S: Product=LE910C4-WWX S: SerialNumber=93f617e7 C: #Ifs= 5 Cfg#= 1 Atr=e0 MxPwr=500mA I: If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I: If#= 1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I: If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=option E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=83(I) Atr=03(Int.) MxPS= 64 Ivl=2ms E: Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I: If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=fe Prot=ff Driver=option E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=85(I) Atr=03(Int.) MxPS= 64 Ivl=2ms E: Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I: If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=qmi_wwan E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=87(I) Atr=03(Int.) MxPS= 64 Ivl=2ms E: Ad=88(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms 0x1038: tty (Telit custom) + tty (AT) + tty (AT) + rmnet T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 9 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=1bc7 ProdID=1038 Rev=00.00 S: Manufacturer=Telit S: Product=LE910C4-WWX S: SerialNumber=93f617e7 C: #Ifs= 4 Cfg#= 1 Atr=e0 MxPwr=500mA I: If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I: If#= 1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=option E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=82(I) Atr=03(Int.) MxPS= 64 Ivl=2ms E: Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I: If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=fe Prot=ff Driver=option E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=84(I) Atr=03(Int.) MxPS= 64 Ivl=2ms E: Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I: If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=qmi_wwan E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=86(I) Atr=03(Int.) MxPS= 64 Ivl=2ms E: Ad=87(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms Cc: stable@vger.kernel.org Signed-off-by: Fabio Porcedda <fabio.porcedda@gmail.com> Link: https://patch.msgid.link/20250822091324.39558-1-Fabio.Porcedda@telit.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-08-25net: usb: lan78xx: add support for generic net selftests via ethtoolOleksij Rempel
Integrate generic net_selftest framework by wiring up .get_strings, .get_sset_count, and .self_test ethtool ops. This enables execution of standard self-tests using `ethtool -t <dev>` on LAN78xx devices. Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Link: https://patch.msgid.link/20250822092555.2888870-1-o.rempel@pengutronix.de Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-08-19net: usb: asix_devices: Fix PHY address mask in MDIO bus initializationYuichiro Tsuji
Syzbot reported shift-out-of-bounds exception on MDIO bus initialization. The PHY address should be masked to 5 bits (0-31). Without this mask, invalid PHY addresses could be used, potentially causing issues with MDIO bus operations. Fix this by masking the PHY address with 0x1f (31 decimal) to ensure it stays within the valid range. Fixes: 4faff70959d5 ("net: usb: asix_devices: add phy_mask for ax88772 mdio bus") Reported-by: syzbot+20537064367a0f98d597@syzkaller.appspotmail.com Closes: https://syzkaller.appspot.com/bug?extid=20537064367a0f98d597 Tested-by: syzbot+20537064367a0f98d597@syzkaller.appspotmail.com Signed-off-by: Yuichiro Tsuji <yuichtsu@amazon.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Link: https://patch.msgid.link/20250818084541.1958-1-yuichtsu@amazon.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-08-19cdc_ncm: Flag Intel OEM version of Fibocom L850-GL as WWANLubomir Rintel
This lets NetworkManager/ModemManager know that this is a modem and needs to be connected first. Signed-off-by: Lubomir Rintel <lkundrak@v3.sk> Link: https://patch.msgid.link/20250814154214.250103-1-lkundrak@v3.sk Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-08-14net: usb: asix_devices: add phy_mask for ax88772 mdio busXu Yang
Without setting phy_mask for ax88772 mdio bus, current driver may create at most 32 mdio phy devices with phy address range from 0x00 ~ 0x1f. DLink DUB-E100 H/W Ver B1 is such a device. However, only one main phy device will bind to net phy driver. This is creating issue during system suspend/resume since phy_polling_mode() in phy_state_machine() will directly deference member of phydev->drv for non-main phy devices. Then NULL pointer dereference issue will occur. Due to only external phy or internal phy is necessary, add phy_mask for ax88772 mdio bus to workarnoud the issue. Closes: https://lore.kernel.org/netdev/20250806082931.3289134-1-xu.yang_2@nxp.com Fixes: e532a096be0e ("net: usb: asix: ax88772: add phylib support") Cc: stable@vger.kernel.org Signed-off-by: Xu Yang <xu.yang_2@nxp.com> Tested-by: Oleksij Rempel <o.rempel@pengutronix.de> Reviewed-by: Oleksij Rempel <o.rempel@pengutronix.de> Link: https://patch.msgid.link/20250811092931.860333-1-xu.yang_2@nxp.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-08-11net: usb: qmi_wwan: add Telit Cinterion FN990A w/audio compositionFabio Porcedda
Add the following Telit Cinterion FN990A w/audio composition: 0x1077: tty (diag) + adb + rmnet + audio + tty (AT/NMEA) + tty (AT) + tty (AT) + tty (AT) T: Bus=01 Lev=01 Prnt=01 Port=09 Cnt=01 Dev#= 8 Spd=480 MxCh= 0 D: Ver= 2.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=1bc7 ProdID=1077 Rev=05.04 S: Manufacturer=Telit Wireless Solutions S: Product=FN990 S: SerialNumber=67e04c35 C: #Ifs=10 Cfg#= 1 Atr=e0 MxPwr=500mA I: If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I: If#= 1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=42 Prot=01 Driver=(none) E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I: If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=50 Driver=qmi_wwan E: Ad=0f(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=83(I) Atr=03(Int.) MxPS= 8 Ivl=32ms E: Ad=8e(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I: If#= 3 Alt= 0 #EPs= 0 Cls=01(audio) Sub=01 Prot=20 Driver=snd-usb-audio I: If#= 4 Alt= 1 #EPs= 1 Cls=01(audio) Sub=02 Prot=20 Driver=snd-usb-audio E: Ad=03(O) Atr=0d(Isoc) MxPS= 68 Ivl=1ms I: If#= 5 Alt= 1 #EPs= 1 Cls=01(audio) Sub=02 Prot=20 Driver=snd-usb-audio E: Ad=84(I) Atr=0d(Isoc) MxPS= 68 Ivl=1ms I: If#= 6 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=60 Driver=option E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=86(I) Atr=03(Int.) MxPS= 10 Ivl=32ms I: If#= 7 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=87(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=88(I) Atr=03(Int.) MxPS= 10 Ivl=32ms I: If#= 8 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option E: Ad=06(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=89(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=8a(I) Atr=03(Int.) MxPS= 10 Ivl=32ms I: If#= 9 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option E: Ad=07(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=8b(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=8c(I) Atr=03(Int.) MxPS= 10 Ivl=32ms Cc: stable@vger.kernel.org Signed-off-by: Fabio Porcedda <fabio.porcedda@gmail.com> Acked-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-08-06net: usbnet: Fix the wrong netif_carrier_on() callAmmar Faizi
The commit referenced in the Fixes tag causes usbnet to malfunction (identified via git bisect). Post-commit, my external RJ45 LAN cable fails to connect. Linus also reported the same issue after pulling that commit. The code has a logic error: netif_carrier_on() is only called when the link is already on. Fix this by moving the netif_carrier_on() call outside the if-statement entirely. This ensures it is always called when EVENT_LINK_CARRIER_ON is set and properly clears it regardless of the link state. Cc: stable@vger.kernel.org Cc: Armando Budianto <sprite@gnuweeb.org> Reviewed-by: Simon Horman <horms@kernel.org> Suggested-by: Linus Torvalds <torvalds@linux-foundation.org> Link: https://lore.kernel.org/all/CAHk-=wjqL4uF0MG_c8+xHX1Vv8==sPYQrtzbdA3kzi96284nuQ@mail.gmail.com Closes: https://lore.kernel.org/netdev/CAHk-=wjKh8X4PT_mU1kD4GQrbjivMfPn-_hXa6han_BTDcXddw@mail.gmail.com Closes: https://lore.kernel.org/netdev/0752dee6-43d6-4e1f-81d2-4248142cccd2@gnuweeb.org Fixes: 0d9cfc9b8cb1 ("net: usbnet: Avoid potential RCU stall on LINK_CHANGE event") Signed-off-by: Ammar Faizi <ammarfaizi2@gnuweeb.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2025-07-26Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski
Merge in late fixes to prepare for the 6.17 net-next PR. Conflicts: net/core/neighbour.c 1bbb76a89948 ("neighbour: Fix null-ptr-deref in neigh_flush_dev().") 13a936bb99fb ("neighbour: Protect tbl->phash_buckets[] with a dedicated mutex.") 03dc03fa0432 ("neighbor: Add NTF_EXT_VALIDATED flag for externally validated entries") Adjacent changes: drivers/net/usb/usbnet.c 0d9cfc9b8cb1 ("net: usbnet: Avoid potential RCU stall on LINK_CHANGE event") 2c04d279e857 ("net: usb: Convert tasklet API to new bottom half workqueue mechanism") net/ipv6/route.c 31d7d67ba127 ("ipv6: annotate data-races around rt->fib6_nsiblings") 1caf27297215 ("ipv6: adopt dst_dev() helper") 3b3ccf9ed05e ("net: Remove unnecessary NULL check for lwtunnel_fill_encap()") Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-07-25usbnet: Set duplex status to unknown in the absence of MIIYi Cong
Currently, USB CDC devices that do not use MDIO to get link status have their duplex mode set to half-duplex by default. However, since the CDC specification does not define a duplex status, this can be misleading. This patch changes the default to DUPLEX_UNKNOWN in the absence of MII, which more accurately reflects the state of the link and avoids implying an incorrect or error state. Link: https://lore.kernel.org/all/20250723152151.70a8034b@kernel.org/ Signed-off-by: Yi Cong <yicong@kylinos.cn> Acked-by: Oliver Neukum <oneukum@suse.com> Link: https://patch.msgid.link/20250724013133.1645142-1-yicongsrfy@163.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-07-25net: usbnet: Avoid potential RCU stall on LINK_CHANGE eventJohn Ernberg
The Gemalto Cinterion PLS83-W modem (cdc_ether) is emitting confusing link up and down events when the WWAN interface is activated on the modem-side. Interrupt URBs will in consecutive polls grab: * Link Connected * Link Disconnected * Link Connected Where the last Connected is then a stable link state. When the system is under load this may cause the unlink_urbs() work in __handle_link_change() to not complete before the next usbnet_link_change() call turns the carrier on again, allowing rx_submit() to queue new SKBs. In that event the URB queue is filled faster than it can drain, ending up in a RCU stall: rcu: INFO: rcu_sched detected expedited stalls on CPUs/tasks: { 0-.... } 33108 jiffies s: 201 root: 0x1/. rcu: blocking rcu_node structures (internal RCU debug): Sending NMI from CPU 1 to CPUs 0: NMI backtrace for cpu 0 Call trace: arch_local_irq_enable+0x4/0x8 local_bh_enable+0x18/0x20 __netdev_alloc_skb+0x18c/0x1cc rx_submit+0x68/0x1f8 [usbnet] rx_alloc_submit+0x4c/0x74 [usbnet] usbnet_bh+0x1d8/0x218 [usbnet] usbnet_bh_tasklet+0x10/0x18 [usbnet] tasklet_action_common+0xa8/0x110 tasklet_action+0x2c/0x34 handle_softirqs+0x2cc/0x3a0 __do_softirq+0x10/0x18 ____do_softirq+0xc/0x14 call_on_irq_stack+0x24/0x34 do_softirq_own_stack+0x18/0x20 __irq_exit_rcu+0xa8/0xb8 irq_exit_rcu+0xc/0x30 el1_interrupt+0x34/0x48 el1h_64_irq_handler+0x14/0x1c el1h_64_irq+0x68/0x6c _raw_spin_unlock_irqrestore+0x38/0x48 xhci_urb_dequeue+0x1ac/0x45c [xhci_hcd] unlink1+0xd4/0xdc [usbcore] usb_hcd_unlink_urb+0x70/0xb0 [usbcore] usb_unlink_urb+0x24/0x44 [usbcore] unlink_urbs.constprop.0.isra.0+0x64/0xa8 [usbnet] __handle_link_change+0x34/0x70 [usbnet] usbnet_deferred_kevent+0x1c0/0x320 [usbnet] process_scheduled_works+0x2d0/0x48c worker_thread+0x150/0x1dc kthread+0xd8/0xe8 ret_from_fork+0x10/0x20 Get around the problem by delaying the carrier on to the scheduled work. This needs a new flag to keep track of the necessary action. The carrier ok check cannot be removed as it remains required for the LINK_RESET event flow. Fixes: 4b49f58fff00 ("usbnet: handle link change") Cc: stable@vger.kernel.org Signed-off-by: John Ernberg <john.ernberg@actia.se> Link: https://patch.msgid.link/20250723102526.1305339-1-john.ernberg@actia.se Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-07-21net: usb: smsc95xx: add support for ethtool pause parametersOleksij Rempel
Implement ethtool .get_pauseparam and .set_pauseparam handlers for configuring flow control on smsc95xx. The driver now supports enabling or disabling transmit and receive pause frames, with or without autonegotiation. Pause settings are applied during link-up based on current PHY state and user configuration. Previously, the driver used phy_get_pause() during link-up handling, but lacked initialization and an ethtool interface to configure pause modes. As a result, flow control support was effectively non-functional. Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Link: https://patch.msgid.link/20250718075157.297923-1-o.rempel@pengutronix.de Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-07-21net: usb: cdc-ncm: check for filtering capabilityOliver Neukum
If the decice does not support filtering, filtering must not be used and all packets delivered for the upper layers to sort. Signed-off-by: Oliver Neukum <oneukum@suse.com> Link: https://patch.msgid.link/20250717120649.2090929-1-oneukum@suse.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-07-21net: usb: Remove duplicate assignments for net->pcpu_stat_typeZqiang
This commit remove duplicate assignments for net->pcpu_stat_type in usbnet_probe(). Signed-off-by: Zqiang <qiang.zhang@linux.dev> Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2025-07-17Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski
Cross-merge networking fixes after downstream PR (net-6.16-rc7). Conflicts: Documentation/netlink/specs/ovpn.yaml 880d43ca9aa4 ("netlink: specs: clean up spaces in brackets") af52020fc599 ("ovpn: reject unexpected netlink attributes") drivers/net/phy/phy_device.c a44312d58e78 ("net: phy: Don't register LEDs for genphy") f0f2b992d818 ("net: phy: Don't register LEDs for genphy") https://lore.kernel.org/20250710114926.7ec3a64f@kernel.org drivers/net/wireless/intel/iwlwifi/fw/regulatory.c drivers/net/wireless/intel/iwlwifi/mld/regulatory.c 5fde0fcbd760 ("wifi: iwlwifi: mask reserved bits in chan_state_active_bitmap") ea045a0de3b9 ("wifi: iwlwifi: add support for accepting raw DSM tables by firmware") net/ipv6/mcast.c ae3264a25a46 ("ipv6: mcast: Delay put pmc->idev in mld_del_delrec()") a8594c956cc9 ("ipv6: mcast: Avoid a duplicate pointer check in mld_del_delrec()") https://lore.kernel.org/8cc52891-3653-4b03-a45e-05464fe495cf@kernel.org No adjacent changes. Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-07-15usb: net: sierra: check for no status endpointOliver Neukum
The driver checks for having three endpoints and having bulk in and out endpoints, but not that the third endpoint is interrupt input. Rectify the omission. Reported-by: syzbot+3f89ec3d1d0842e95d50@syzkaller.appspotmail.com Closes: https://lore.kernel.org/linux-usb/686d5a9f.050a0220.1ffab7.0017.GAE@google.com/ Tested-by: syzbot+3f89ec3d1d0842e95d50@syzkaller.appspotmail.com Fixes: eb4fd8cd355c8 ("net/usb: add sierra_net.c driver") Signed-off-by: Oliver Neukum <oneukum@suse.com> Link: https://patch.msgid.link/20250714111326.258378-1-oneukum@suse.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-07-09net: usb: enable the work after stop usbnet by ip down/upZqiang
Oleksij reported that: The smsc95xx driver fails after one down/up cycle, like this: $ nmcli device set enu1u1 managed no $ p a a 10.10.10.1/24 dev enu1u1 $ ping -c 4 10.10.10.3 $ ip l s dev enu1u1 down $ ip l s dev enu1u1 up $ ping -c 4 10.10.10.3 The second ping does not reach the host. Networking also fails on other interfaces. Enable the work by replacing the disable_work_sync() with cancel_work_sync(). [Jun Miao: completely write the commit changelog] Fixes: 2c04d279e857 ("net: usb: Convert tasklet API to new bottom half workqueue mechanism") Reported-by: Oleksij Rempel <o.rempel@pengutronix.de> Tested-by: Oleksij Rempel <o.rempel@pengutronix.de> Signed-off-by: Zqiang <qiang.zhang@linux.dev> Signed-off-by: Jun Miao <jun.miao@intel.com> Link: https://patch.msgid.link/20250708081653.307815-1-jun.miao@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-07-07net: usb: lan78xx: stop including phy_fixed.hHeiner Kallweit
Since e110bc825897 ("net: usb: lan78xx: Convert to PHYLINK for improved PHY and MAC management") this header isn't needed any longer. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Link: https://patch.msgid.link/626d389a-0f33-4b45-8949-ad53e89c36f5@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-07-01net: usb: lan78xx: fix possible NULL pointer dereference in lan78xx_phy_init()Oleksij Rempel
If no PHY device is found (e.g., for LAN7801 in fixed-link mode), lan78xx_phy_init() may proceed to dereference a NULL phydev pointer, leading to a crash. Update the logic to perform MAC configuration first, then check for the presence of a PHY. For the fixed-link case, set up the fixed link and return early, bypassing any code that assumes a valid phydev pointer. It is safe to move lan78xx_mac_prepare_for_phy() earlier because this function only uses information from dev->interface, which is configured by lan78xx_get_phy() beforehand. The function does not access phydev or any data set up by later steps. Reported-by: Dan Carpenter <dan.carpenter@linaro.org> Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Fixes: e110bc825897 ("net: usb: lan78xx: Convert to PHYLINK for improved PHY and MAC management") Link: https://patch.msgid.link/20250626103731.3986545-1-o.rempel@pengutronix.de Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-06-30net: usb: lan78xx: fix WARN in __netif_napi_del_locked on disconnectOleksij Rempel
Remove redundant netif_napi_del() call from disconnect path. A WARN may be triggered in __netif_napi_del_locked() during USB device disconnect: WARNING: CPU: 0 PID: 11 at net/core/dev.c:7417 __netif_napi_del_locked+0x2b4/0x350 This happens because netif_napi_del() is called in the disconnect path while NAPI is still enabled. However, it is not necessary to call netif_napi_del() explicitly, since unregister_netdev() will handle NAPI teardown automatically and safely. Removing the redundant call avoids triggering the warning. Full trace: lan78xx 1-1:1.0 enu1: Failed to read register index 0x000000c4. ret = -ENODEV lan78xx 1-1:1.0 enu1: Failed to set MAC down with error -ENODEV lan78xx 1-1:1.0 enu1: Link is Down lan78xx 1-1:1.0 enu1: Failed to read register index 0x00000120. ret = -ENODEV ------------[ cut here ]------------ WARNING: CPU: 0 PID: 11 at net/core/dev.c:7417 __netif_napi_del_locked+0x2b4/0x350 Modules linked in: flexcan can_dev fuse CPU: 0 UID: 0 PID: 11 Comm: kworker/0:1 Not tainted 6.16.0-rc2-00624-ge926949dab03 #9 PREEMPT Hardware name: SKOV IMX8MP CPU revC - bd500 (DT) Workqueue: usb_hub_wq hub_event pstate: 60000005 (nZCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--) pc : __netif_napi_del_locked+0x2b4/0x350 lr : __netif_napi_del_locked+0x7c/0x350 sp : ffffffc085b673c0 x29: ffffffc085b673c0 x28: ffffff800b7f2000 x27: ffffff800b7f20d8 x26: ffffff80110bcf58 x25: ffffff80110bd978 x24: 1ffffff0022179eb x23: ffffff80110bc000 x22: ffffff800b7f5000 x21: ffffff80110bc000 x20: ffffff80110bcf38 x19: ffffff80110bcf28 x18: dfffffc000000000 x17: ffffffc081578940 x16: ffffffc08284cee0 x15: 0000000000000028 x14: 0000000000000006 x13: 0000000000040000 x12: ffffffb0022179e8 x11: 1ffffff0022179e7 x10: ffffffb0022179e7 x9 : dfffffc000000000 x8 : 0000004ffdde8619 x7 : ffffff80110bcf3f x6 : 0000000000000001 x5 : ffffff80110bcf38 x4 : ffffff80110bcf38 x3 : 0000000000000000 x2 : 0000000000000000 x1 : 1ffffff0022179e7 x0 : 0000000000000000 Call trace: __netif_napi_del_locked+0x2b4/0x350 (P) lan78xx_disconnect+0xf4/0x360 usb_unbind_interface+0x158/0x718 device_remove+0x100/0x150 device_release_driver_internal+0x308/0x478 device_release_driver+0x1c/0x30 bus_remove_device+0x1a8/0x368 device_del+0x2e0/0x7b0 usb_disable_device+0x244/0x540 usb_disconnect+0x220/0x758 hub_event+0x105c/0x35e0 process_one_work+0x760/0x17b0 worker_thread+0x768/0xce8 kthread+0x3bc/0x690 ret_from_fork+0x10/0x20 irq event stamp: 211604 hardirqs last enabled at (211603): [<ffffffc0828cc9ec>] _raw_spin_unlock_irqrestore+0x84/0x98 hardirqs last disabled at (211604): [<ffffffc0828a9a84>] el1_dbg+0x24/0x80 softirqs last enabled at (211296): [<ffffffc080095f10>] handle_softirqs+0x820/0xbc8 softirqs last disabled at (210993): [<ffffffc080010288>] __do_softirq+0x18/0x20 ---[ end trace 0000000000000000 ]--- lan78xx 1-1:1.0 enu1: failed to kill vid 0081/0 Fixes: ec4c7e12396b ("lan78xx: Introduce NAPI polling support") Suggested-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Link: https://patch.msgid.link/20250627051346.276029-1-o.rempel@pengutronix.de Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-06-26Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski
Cross-merge networking fixes after downstream PR (net-6.16-rc4). Conflicts: Documentation/netlink/specs/mptcp_pm.yaml 9e6dd4c256d0 ("netlink: specs: mptcp: replace underscores with dashes in names") ec362192aa9e ("netlink: specs: fix up indentation errors") https://lore.kernel.org/20250626122205.389c2cd4@canb.auug.org.au Adjacent changes: Documentation/netlink/specs/fou.yaml 791a9ed0a40d ("netlink: specs: fou: replace underscores with dashes in names") 880d43ca9aa4 ("netlink: specs: clean up spaces in brackets") Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-06-21net: usb: qmi_wwan: add SIMCom 8230C compositionXiaowei Li
Add support for SIMCom 8230C which is based on Qualcomm SDX35 chip. 0x9071: tty (DM) + tty (NMEA) + tty (AT) + rmnet T: Bus=01 Lev=01 Prnt=01 Port=05 Cnt=02 Dev#= 8 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=1e0e ProdID=9071 Rev= 5.15 S: Manufacturer=SIMCOM S: Product=SDXBAAGHA-IDP _SN:D744C4C5 S: SerialNumber=0123456789ABCDEF C:* #Ifs= 5 Cfg#= 1 Atr=a0 MxPwr=500mA I:* If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option E: Ad=84(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=50 Driver=qmi_wwan E: Ad=86(I) Atr=03(Int.) MxPS= 8 Ivl=32ms E: Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 4 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=42 Prot=01 Driver=none E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=87(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms Signed-off-by: Xiaowei Li <xiaowei.li@simcom.com> Acked-by: Bjørn Mork <bjorn@mork.no> Link: https://patch.msgid.link/tencent_21D781FAA4969FEACA6ABB460362B52C9409@qq.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-06-19net: usb: Convert tasklet API to new bottom half workqueue mechanismJun Miao
Migrate tasklet APIs to the new bottom half workqueue mechanism. It replaces all occurrences of tasklet usage with the appropriate workqueue APIs throughout the usbnet driver. This transition ensures compatibility with the latest design and enhances performance. Signed-off-by: Jun Miao <jun.miao@intel.com> Link: https://patch.msgid.link/20250618173923.950510-1-jun.miao@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-06-19net: usb: lan78xx: remove unused struct membersOleksij Rempel
Remove unused members from struct lan78xx_net, including: driver_priv suspend_count mdix_ctrl These fields are no longer used in the driver and can be safely removed as part of a cleanup. Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Link: https://patch.msgid.link/20250618122602.3156678-7-o.rempel@pengutronix.de Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-06-19net: usb: lan78xx: Integrate EEE support with phylink LPI APIOleksij Rempel
Refactor Energy-Efficient Ethernet (EEE) support in the LAN78xx driver to fully integrate with the phylink Low Power Idle (LPI) API. This includes: - Replacing direct calls to `phy_ethtool_get_eee` and `phy_ethtool_set_eee` with `phylink_ethtool_get_eee` and `phylink_ethtool_set_eee`. - Implementing `.mac_enable_tx_lpi` and `.mac_disable_tx_lpi` to control LPI transitions via phylink. - Configuring `lpi_timer_default` to align with recommended values from LAN7800 documentation. - ensure EEE is disabled on controller reset Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Link: https://patch.msgid.link/20250618122602.3156678-6-o.rempel@pengutronix.de Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-06-19net: usb: lan78xx: port link settings to phylink APIOleksij Rempel
Refactor lan78xx_get_link_ksettings and lan78xx_set_link_ksettings to use the phylink API (phylink_ethtool_ksettings_get and phylink_ethtool_ksettings_set) instead of directly interfacing with the PHY. This change simplifies the code and ensures better integration with the phylink framework for link management. Additionally, the explicit calls to usb_autopm_get_interface() and usb_autopm_put_interface() have been removed. These were originally needed to manage USB power management during register accesses. However, lan78xx_mdiobus_read() and lan78xx_mdiobus_write() already handle USB auto power management internally, ensuring that the interface remains active when necessary. Since there are no other direct register accesses in these functions that require explicit power management handling, the extra calls have become redundant and are no longer needed. Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Reviewed-by: Maxime Chevallier <maxime.chevallier@bootlin.com> Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Link: https://patch.msgid.link/20250618122602.3156678-5-o.rempel@pengutronix.de Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-06-19net: usb: lan78xx: Use ethtool_op_get_link to reflect current link statusOleksij Rempel
Replace the custom lan78xx_get_link implementation with the standard ethtool_op_get_link helper, which uses netif_carrier_ok to reflect the current link status accurately. Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Reviewed-by: Maxime Chevallier <maxime.chevallier@bootlin.com> Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Link: https://patch.msgid.link/20250618122602.3156678-4-o.rempel@pengutronix.de Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-06-19net: usb: lan78xx: Rename EVENT_LINK_RESET to EVENT_PHY_INT_ACKOleksij Rempel
The EVENT_LINK_RESET macro currently triggers deferred work after a PHY interrupt. Prior to PHYLINK conversion, this work included reconfiguring the MAC and PHY, effectively performing a 'link reset'. However, after porting the driver to the PHYLINK framework, the logic associated with this event now solely handles the acknowledgment of the PHY interrupt. The MAC and PHY reconfiguration is now managed by PHYLINK's dedicated callbacks. To accurately reflect its current, narrowed functionality, rename EVENT_LINK_RESET to EVENT_PHY_INT_ACK. Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Link: https://patch.msgid.link/20250618122602.3156678-3-o.rempel@pengutronix.de Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-06-19net: usb: lan78xx: Convert to PHYLINK for improved PHY and MAC managementOleksij Rempel
Convert the LAN78xx USB Ethernet driver to use the PHYLINK framework for managing PHY and MAC interactions. This improves consistency with other network drivers, simplifies pause frame handling, and enables cleaner suspend/resume support. Key changes: - Replace all PHYLIB-based logic with PHYLINK equivalents: - Replace phy_connect()/phy_disconnect() with phylink_connect_phy() - Replace phy_start()/phy_stop() with phylink_start()/phylink_stop() - Replace pauseparam handling with phylink_ethtool_get/set_pauseparam() - Introduce lan78xx_phylink_setup() to configure PHYLINK - Add phylink MAC operations: - lan78xx_mac_config() - lan78xx_mac_link_up() - lan78xx_mac_link_down() - Remove legacy link state handling: - lan78xx_link_status_change() - lan78xx_link_reset() - Handle fixed-link fallback for LAN7801 using phylink_set_fixed_link() - Replace deprecated flow control handling with phylink-managed logic Power management: - Switch suspend/resume paths to use phylink_suspend()/phylink_resume() - Ensure proper use of rtnl_lock() where required - Note: full runtime testing of power management is currently limited due to hardware setup constraints Note: Conversion of EEE (Energy Efficient Ethernet) handling to the PHYLINK-managed API will be done in a follow-up patch. For now, the legacy EEE enable logic is preserved in mac_link_up(). Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Link: https://patch.msgid.link/20250618122602.3156678-2-o.rempel@pengutronix.de Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-06-12net: Use dev_fwnode()Jiri Slaby (SUSE)
irq_domain_create_simple() takes fwnode as the first argument. It can be extracted from the struct device using dev_fwnode() helper instead of using of_node with of_fwnode_handle(). So use the dev_fwnode() helper. Signed-off-by: Jiri Slaby (SUSE) <jirislaby@kernel.org> Link: https://patch.msgid.link/20250611104348.192092-15-jirislaby@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
generated by cgit v1.2.3 (git 2.46.0) at 2025-12-11 10:26:46 +0000