| Age | Commit message (Collapse) | Author |
|---|
|
Use DEFINE_RAW_FLEX() to avoid a -Wflex-array-member-not-at-end warning.
Remove fixed-size array struct usb_cdc_ncm_dpe16 dpe16[2]; from struct
mbim_tx_hdr, so that flex-array member struct mbim_tx_hdr::ndp16.dpe16[]
ends last in this structure.
Compensate for this by using the DEFINE_RAW_FLEX() helper to declare the
on-stack struct instance that contains struct usb_cdc_ncm_ndp16 as a
member. Adjust the rest of the code, accordingly.
So, with these changes fix the following warning:
drivers/net/wwan/mhi_wwan_mbim.c:81:34: warning: structure containing a flexible array member is not at the end of another structure [-Wflex-array-member-not-at-end]
Reviewed-by: Loic Poulain <loic.poulain@oss.qualcomm.com>
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Conflicts:
net/xdp/xsk.c
0ebc27a4c67d ("xsk: avoid data corruption on cq descriptor number")
8da7bea7db69 ("xsk: add indirect call for xsk_destruct_skb")
30ed05adca4a ("xsk: use a smaller new lock for shared pool case")
https://lore.kernel.org/20251127105450.4a1665ec@canb.auug.org.au
https://lore.kernel.org/eb4eee14-7e24-4d1b-b312-e9ea738fefee@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Correct it since M.2 device T99W640 has updated from T99W515.
We need to align it with MHI side otherwise this modem can't
get the network.
Fixes: ae5a34264354 ("bus: mhi: host: pci_generic: Fix the modem name of Foxconn T99W640")
Signed-off-by: Slark Xiao <slark_xiao@163.com>
Reviewed-by: Loic Poulain <loic.poulain@oss.qualcomm.com>
Link: https://patch.msgid.link/20251125070900.33324-1-slark_xiao@163.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
This function was used in t7xx_hif_cldma.c only. Make it static
as it should be.
Signed-off-by: Slark Xiao <slark_xiao@163.com>
Reviewed-by: Loic Poulain <loic.poulain@qualcomm.com>
Link: https://patch.msgid.link/20251120115208.345578-1-slark_xiao@163.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Allow devlink_param::get() handlers to report error messages via
extack. This function is called in a few different contexts, but not
all of them will have an valid extack to use.
When devlink_param::get() is called from param_get_doit or
param_get_dumpit contexts, pass the extack through so that drivers can
report errors when retrieving param values. devlink_param::get() is
called from the context of devlink_param_notify(), pass NULL in for
the extack.
Reviewed-by: Saeed Mahameed <saeedm@nvidia.com>
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Signed-off-by: Daniel Zahka <daniel.zahka@gmail.com>
Link: https://patch.msgid.link/20251119025038.651131-2-daniel.zahka@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
pm_runtime_put_autosuspend(), pm_runtime_put_sync_autosuspend(),
pm_runtime_autosuspend() and pm_request_autosuspend() now include a call
to pm_runtime_mark_last_busy(). Remove the now-reduntant explicit call to
pm_runtime_mark_last_busy().
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Link: https://patch.msgid.link/20251027115022.390997-4-sakari.ailus@linux.intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
add support for HP DRMR-H01 (0x03f0, 0x09c8)
Signed-off-by: Sammy Hsu <sammy.hsu@wnc.com.tw>
Link: https://patch.msgid.link/20251002024841.5979-1-sammy.hsu@wnc.com.tw
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Currently if a user enqueue a work item using schedule_delayed_work() the
used wq is "system_wq" (per-cpu wq) while queue_delayed_work() use
WORK_CPU_UNBOUND (used when a cpu is not specified). The same applies to
schedule_work() that is using system_wq and queue_work(), that makes use
again of WORK_CPU_UNBOUND.
This lack of consistentcy cannot be addressed without refactoring the API.
alloc_workqueue() treats all queues as per-CPU by default, while unbound
workqueues must opt-in via WQ_UNBOUND.
This default is suboptimal: most workloads benefit from unbound queues,
allowing the scheduler to place worker threads where they’re needed and
reducing noise when CPUs are isolated.
This change adds a new WQ_PERCPU flag at the network subsystem, to explicitly
request the use of the per-CPU behavior. Both flags coexist for one release
cycle to allow callers to transition their calls.
Once migration is complete, WQ_UNBOUND can be removed and unbound will
become the implicit default.
With the introduction of the WQ_PERCPU flag (equivalent to !WQ_UNBOUND),
any alloc_workqueue() caller that doesn’t explicitly specify WQ_UNBOUND
must now use WQ_PERCPU.
All existing users have been updated accordingly.
Suggested-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Marco Crivellari <marco.crivellari@suse.com>
Link: https://patch.msgid.link/20250918142427.309519-4-marco.crivellari@suse.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The 'ret' variable in ipc_pcie_resources_request() either stores '-EBUSY'
directly or holds returns from pci_request_regions() and ipc_acquire_irq().
Storing negative error codes in u32 causes no runtime issues but is
stylistically inconsistent and very ugly. Change 'ret' from u32 to int
type - this has no runtime impact.
Signed-off-by: Qianfeng Rong <rongqianfeng@vivo.com>
Reviewed-by: Loic Poulain <loic.poulain@oss.qualcomm.com>
Link: https://patch.msgid.link/20250826135021.510767-1-rongqianfeng@vivo.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Patch series "relayfs: misc changes", v5.
The series mostly focuses on the error counters which helps every user
debug their own kernel module.
This patch (of 5):
prev_padding represents the unused space of certain subbuffer. If the
content of a call of relay_write() exceeds the limit of the remainder of
this subbuffer, it will skip storing in the rest space and record the
start point as buf->prev_padding in relay_switch_subbuf(). Since the buf
is a per-cpu big buffer, the point of prev_padding as a global value for
the whole buffer instead of a single subbuffer (whose padding info is
stored in buf->padding[]) seems meaningless from the real use cases, so we
don't bother to record it any more.
Link: https://lkml.kernel.org/r/20250612061201.34272-1-kerneljasonxing@gmail.com
Link: https://lkml.kernel.org/r/20250612061201.34272-2-kerneljasonxing@gmail.com
Signed-off-by: Jason Xing <kernelxing@tencent.com>
Reviewed-by: Yushan Zhou <katrinzhou@tencent.com>
Reviewed-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Recent Qualcomm chipsets like SDX72/75 require MBIM sessionId mapping
to muxId in the range (0x70-0x8F) for the PCIe tethered use.
This has been partially addressed by the referenced commit, mapping
the default data call to muxId = 112, but the multiplexed data calls
scenario was not properly considered, mapping sessionId = 1 to muxId
1, while it should have been 113.
Fix this by moving the session_id assignment logic to mhi_mbim_newlink,
in order to map sessionId = n to muxId = n + WDS_BIND_MUX_DATA_PORT_MUX_ID.
Fixes: 65bc58c3dcad ("net: wwan: mhi: make default data link id configurable")
Signed-off-by: Daniele Palmas <dnlplm@gmail.com>
Reviewed-by: Loic Poulain <loic.poulain@oss.qualcomm.com>
Link: https://patch.msgid.link/20250603091204.2802840-1-dnlplm@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
When driver handles the napi rx polling requests, the netdev might
have been released by the dellink logic triggered by the disconnect
operation on user plane. However, in the logic of processing skb in
polling, an invalid netdev is still being used, which causes a panic.
BUG: kernel NULL pointer dereference, address: 00000000000000f1
Oops: 0000 [#1] PREEMPT SMP NOPTI
RIP: 0010:dev_gro_receive+0x3a/0x620
[...]
Call Trace:
<IRQ>
? __die_body+0x68/0xb0
? page_fault_oops+0x379/0x3e0
? exc_page_fault+0x4f/0xa0
? asm_exc_page_fault+0x22/0x30
? __pfx_t7xx_ccmni_recv_skb+0x10/0x10 [mtk_t7xx (HASH:1400 7)]
? dev_gro_receive+0x3a/0x620
napi_gro_receive+0xad/0x170
t7xx_ccmni_recv_skb+0x48/0x70 [mtk_t7xx (HASH:1400 7)]
t7xx_dpmaif_napi_rx_poll+0x590/0x800 [mtk_t7xx (HASH:1400 7)]
net_rx_action+0x103/0x470
irq_exit_rcu+0x13a/0x310
sysvec_apic_timer_interrupt+0x56/0x90
</IRQ>
Fixes: 5545b7b9f294 ("net: wwan: t7xx: Add NAPI support")
Signed-off-by: Jinjian Song <jinjian.song@fibocom.com>
Link: https://patch.msgid.link/20250530031648.5592-1-jinjian.song@fibocom.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking updates from Jakub Kicinski:
"Core & protocols:
- Continue Netlink conversions to per-namespace RTNL lock
(IPv4 routing, routing rules, routing next hops, ARP ioctls)
- Continue extending the use of netdev instance locks. As a driver
opt-in protect queue operations and (in due course) ethtool
operations with the instance lock and not RTNL lock.
- Support collecting TCP timestamps (data submitted, sent, acked) in
BPF, allowing for transparent (to the application) and lower
overhead tracking of TCP RPC performance.
- Tweak existing networking Rx zero-copy infra to support zero-copy
Rx via io_uring.
- Optimize MPTCP performance in single subflow mode by 29%.
- Enable GRO on packets which went thru XDP CPU redirect (were queued
for processing on a different CPU). Improving TCP stream
performance up to 2x.
- Improve performance of contended connect() by 200% by searching for
an available 4-tuple under RCU rather than a spin lock. Bring an
additional 229% improvement by tweaking hash distribution.
- Avoid unconditionally touching sk_tsflags on RX, improving
performance under UDP flood by as much as 10%.
- Avoid skb_clone() dance in ping_rcv() to improve performance under
ping flood.
- Avoid FIB lookup in netfilter if socket is available, 20% perf win.
- Rework network device creation (in-kernel) API to more clearly
identify network namespaces and their roles. There are up to 4
namespace roles but we used to have just 2 netns pointer arguments,
interpreted differently based on context.
- Use sysfs_break_active_protection() instead of trylock to avoid
deadlocks between unregistering objects and sysfs access.
- Add a new sysctl and sockopt for capping max retransmit timeout in
TCP.
- Support masking port and DSCP in routing rule matches.
- Support dumping IPv4 multicast addresses with RTM_GETMULTICAST.
- Support specifying at what time packet should be sent on AF_XDP
sockets.
- Expose TCP ULP diagnostic info (for TLS and MPTCP) to non-admin
users.
- Add Netlink YAML spec for WiFi (nl80211) and conntrack.
- Introduce EXPORT_IPV6_MOD() and EXPORT_IPV6_MOD_GPL() for symbols
which only need to be exported when IPv6 support is built as a
module.
- Age FDB entries based on Rx not Tx traffic in VxLAN, similar to
normal bridging.
- Allow users to specify source port range for GENEVE tunnels.
- netconsole: allow attaching kernel release, CPU ID and task name to
messages as metadata
Driver API:
- Continue rework / fixing of Energy Efficient Ethernet (EEE) across
the SW layers. Delegate the responsibilities to phylink where
possible. Improve its handling in phylib.
- Support symmetric OR-XOR RSS hashing algorithm.
- Support tracking and preserving IRQ affinity by NAPI itself.
- Support loopback mode speed selection for interface selftests.
Device drivers:
- Remove the IBM LCS driver for s390
- Remove the sb1000 cable modem driver
- Add support for SFP module access over SMBus
- Add MCTP transport driver for MCTP-over-USB
- Enable XDP metadata support in multiple drivers
- Ethernet high-speed NICs:
- Broadcom (bnxt):
- add PCIe TLP Processing Hints (TPH) support for new AMD
platforms
- support dumping RoCE queue state for debug
- opt into instance locking
- Intel (100G, ice, idpf):
- ice: rework MSI-X IRQ management and distribution
- ice: support for E830 devices
- iavf: add support for Rx timestamping
- iavf: opt into instance locking
- nVidia/Mellanox:
- mlx4: use page pool memory allocator for Rx
- mlx5: support for one PTP device per hardware clock
- mlx5: support for 200Gbps per-lane link modes
- mlx5: move IPSec policy check after decryption
- AMD/Solarflare:
- support FW flashing via devlink
- Cisco (enic):
- use page pool memory allocator for Rx
- enable 32, 64 byte CQEs
- get max rx/tx ring size from the device
- Meta (fbnic):
- support flow steering and RSS configuration
- report queue stats
- support TCP segmentation
- support IRQ coalescing
- support ring size configuration
- Marvell/Cavium:
- support AF_XDP
- Wangxun:
- support for PTP clock and timestamping
- Huawei (hibmcge):
- checksum offload
- add more statistics
- Ethernet virtual:
- VirtIO net:
- aggressively suppress Tx completions, improve perf by 96%
with 1 CPU and 55% with 2 CPUs
- expose NAPI to IRQ mapping and persist NAPI settings
- Google (gve):
- support XDP in DQO RDA Queue Format
- opt into instance locking
- Microsoft vNIC:
- support BIG TCP
- Ethernet NICs consumer, and embedded:
- Synopsys (stmmac):
- cleanup Tx and Tx clock setting and other link-focused
cleanups
- enable SGMII and 2500BASEX mode switching for Intel platforms
- support Sophgo SG2044
- Broadcom switches (b53):
- support for BCM53101
- TI:
- iep: add perout configuration support
- icssg: support XDP
- Cadence (macb):
- implement BQL
- Xilinx (axinet):
- support dynamic IRQ moderation and changing coalescing at
runtime
- implement BQL
- report standard stats
- MediaTek:
- support phylink managed EEE
- Intel:
- igc: don't restart the interface on every XDP program change
- RealTek (r8169):
- support reading registers of internal PHYs directly
- increase max jumbo packet size on RTL8125/RTL8126
- Airoha:
- support for RISC-V NPU packet processing unit
- enable scatter-gather and support MTU up to 9kB
- Tehuti (tn40xx):
- support cards with TN4010 MAC and an Aquantia AQR105 PHY
- Ethernet PHYs:
- support for TJA1102S, TJA1121
- dp83tg720: add randomized polling intervals for link detection
- dp83822: support changing the transmit amplitude voltage
- support for LEDs on 88q2xxx
- CAN:
- canxl: support Remote Request Substitution bit access
- flexcan: add S32G2/S32G3 SoC
- WiFi:
- remove cooked monitor support
- strict mode for better AP testing
- basic EPCS support
- OMI RX bandwidth reduction support
- batman-adv: add support for jumbo frames
- WiFi drivers:
- RealTek (rtw88):
- support RTL8814AE and RTL8814AU
- RealTek (rtw89):
- switch using wiphy_lock and wiphy_work
- add BB context to manipulate two PHY as preparation of MLO
- improve BT-coexistence mechanism to play A2DP smoothly
- Intel (iwlwifi):
- add new iwlmld sub-driver for latest HW/FW combinations
- MediaTek (mt76):
- preparation for mt7996 Multi-Link Operation (MLO) support
- Qualcomm/Atheros (ath12k):
- continued work on MLO
- Silabs (wfx):
- Wake-on-WLAN support
- Bluetooth:
- add support for skb TX SND/COMPLETION timestamping
- hci_core: enable buffer flow control for SCO/eSCO
- coredump: log devcd dumps into the monitor
- Bluetooth drivers:
- intel: add support to configure TX power
- nxp: handle bootloader error during cmd5 and cmd7"
* tag 'net-next-6.15' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1681 commits)
unix: fix up for "apparmor: add fine grained af_unix mediation"
mctp: Fix incorrect tx flow invalidation condition in mctp-i2c
net: usb: asix: ax88772: Increase phy_name size
net: phy: Introduce PHY_ID_SIZE — minimum size for PHY ID string
net: libwx: fix Tx L4 checksum
net: libwx: fix Tx descriptor content for some tunnel packets
atm: Fix NULL pointer dereference
net: tn40xx: add pci-id of the aqr105-based Tehuti TN4010 cards
net: tn40xx: prepare tn40xx driver to find phy of the TN9510 card
net: tn40xx: create swnode for mdio and aqr105 phy and add to mdiobus
net: phy: aquantia: add essential functions to aqr105 driver
net: phy: aquantia: search for firmware-name in fwnode
net: phy: aquantia: add probe function to aqr105 for firmware loading
net: phy: Add swnode support to mdiobus_scan
gve: add XDP DROP and PASS support for DQ
gve: update XDP allocation path support RX buffer posting
gve: merge packet buffer size fields
gve: update GQ RX to use buf_size
gve: introduce config-based allocation for XDP
gve: remove xdp_xsk_done and xdp_xsk_wakeup statistics
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull timer cleanups from Thomas Gleixner:
"A treewide hrtimer timer cleanup
hrtimers are initialized with hrtimer_init() and a subsequent store to
the callback pointer. This turned out to be suboptimal for the
upcoming Rust integration and is obviously a silly implementation to
begin with.
This cleanup replaces the hrtimer_init(T); T->function = cb; sequence
with hrtimer_setup(T, cb);
The conversion was done with Coccinelle and a few manual fixups.
Once the conversion has completely landed in mainline, hrtimer_init()
will be removed and the hrtimer::function becomes a private member"
* tag 'timers-cleanups-2025-03-23' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (100 commits)
wifi: rt2x00: Switch to use hrtimer_update_function()
io_uring: Use helper function hrtimer_update_function()
serial: xilinx_uartps: Use helper function hrtimer_update_function()
ASoC: fsl: imx-pcm-fiq: Switch to use hrtimer_setup()
RDMA: Switch to use hrtimer_setup()
virtio: mem: Switch to use hrtimer_setup()
drm/vmwgfx: Switch to use hrtimer_setup()
drm/xe/oa: Switch to use hrtimer_setup()
drm/vkms: Switch to use hrtimer_setup()
drm/msm: Switch to use hrtimer_setup()
drm/i915/request: Switch to use hrtimer_setup()
drm/i915/uncore: Switch to use hrtimer_setup()
drm/i915/pmu: Switch to use hrtimer_setup()
drm/i915/perf: Switch to use hrtimer_setup()
drm/i915/gvt: Switch to use hrtimer_setup()
drm/i915/huc: Switch to use hrtimer_setup()
drm/amdgpu: Switch to use hrtimer_setup()
stm class: heartbeat: Switch to use hrtimer_setup()
i2c: Switch to use hrtimer_setup()
iio: Switch to use hrtimer_setup()
...
|
|
In fact, these two are not tied closely to each other. The only
requirements to GRO are to use it in the BH context and have some
sane limits on the packet batches, e.g. NAPI has a limit of its
budget (64/8/etc.).
Move purely GRO fields into a new structure, &gro_node. Embed it
into &napi_struct and adjust all the references.
gro_node::cached_napi_id is effectively the same as
napi_struct::napi_id, but to be used on GRO hotpath to mark skbs.
napi_struct::napi_id is now a fully control path field.
Three Ethernet drivers use napi_gro_flush() not really meant to be
exported, so move it to <net/gro.h> and add that include there.
napi_gro_receive() is used in more than 100 drivers, keep it
in <linux/netdevice.h>.
This does not make GRO ready to use outside of the NAPI context
yet.
Tested-by: Daniel Xu <dxu@dxuuu.xyz>
Acked-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Toke Høiland-Jørgensen <toke@redhat.com>
Signed-off-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Add two helper functions - rtnl_newlink_link_net() and
rtnl_newlink_peer_net() for netns fallback logic. Peer netns falls back
to link netns, and link netns falls back to source netns.
Convert the use of params->net in netdevice drivers to one of the helper
functions for clarity.
Signed-off-by: Xiao Liang <shaw.leon@gmail.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://patch.msgid.link/20250219125039.18024-4-shaw.leon@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
There are 4 net namespaces involved when creating links:
- source netns - where the netlink socket resides,
- target netns - where to put the device being created,
- link netns - netns associated with the device (backend),
- peer netns - netns of peer device.
Currently, two nets are passed to newlink() callback - "src_net"
parameter and "dev_net" (implicitly in net_device). They are set as
follows, depending on netlink attributes in the request.
+------------+-------------------+---------+---------+
| peer netns | IFLA_LINK_NETNSID | src_net | dev_net |
+------------+-------------------+---------+---------+
| | absent | source | target |
| absent +-------------------+---------+---------+
| | present | link | link |
+------------+-------------------+---------+---------+
| | absent | peer | target |
| present +-------------------+---------+---------+
| | present | peer | link |
+------------+-------------------+---------+---------+
When IFLA_LINK_NETNSID is present, the device is created in link netns
first and then moved to target netns. This has some side effects,
including extra ifindex allocation, ifname validation and link events.
These could be avoided if we create it in target netns from
the beginning.
On the other hand, the meaning of src_net parameter is ambiguous. It
varies depending on how parameters are passed. It is the effective
link (or peer netns) by design, but some drivers ignore it and use
dev_net instead.
To provide more netns context for drivers, this patch packs existing
newlink() parameters, along with the source netns, link netns and peer
netns, into a struct. The old "src_net" is renamed to "net" to avoid
confusion with real source netns, and will be deprecated later. The use
of src_net are converted to params->net trivially.
Signed-off-by: Xiao Liang <shaw.leon@gmail.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://patch.msgid.link/20250219125039.18024-3-shaw.leon@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Cross-merge networking fixes after downstream PR (net-6.14-rc4).
No conflicts or adjacent changes.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
hrtimer_setup() takes the callback function pointer as argument and
initializes the timer completely.
Replace hrtimer_init() and the open coded initialization of
hrtimer::function with the new setup mechanism.
Patch was created by using Coccinelle.
Signed-off-by: Nam Cao <namcao@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/e42d7d29879017d4b5ca9555f806e782658e3f21.1738746872.git.namcao@linutronix.de
|
|
When using the Qualcomm X55 modem on the ThinkPad X13s, the kernel log is
constantly being filled with errors related to a "sequence number glitch",
e.g.:
[ 1903.284538] sequence number glitch prev=16 curr=0
[ 1913.812205] sequence number glitch prev=50 curr=0
[ 1923.698219] sequence number glitch prev=142 curr=0
[ 2029.248276] sequence number glitch prev=1555 curr=0
[ 2046.333059] sequence number glitch prev=70 curr=0
[ 2076.520067] sequence number glitch prev=272 curr=0
[ 2158.704202] sequence number glitch prev=2655 curr=0
[ 2218.530776] sequence number glitch prev=2349 curr=0
[ 2225.579092] sequence number glitch prev=6 curr=0
Internet connectivity is working fine, so this error seems harmless. It
looks like modem does not preserve the sequence number when entering low
power state; the amount of errors depends on how actively the modem is
being used.
A similar issue has also been seen on USB-based MBIM modems [1]. However,
in cdc_ncm.c the "sequence number glitch" message is a debug message
instead of an error. Apply the same to the mhi_wwan_mbim.c driver to
silence these errors when using the modem.
[1]: https://lists.freedesktop.org/archives/libmbim-devel/2016-November/000781.html
Signed-off-by: Stephan Gerhold <stephan.gerhold@linaro.org>
Reviewed-by: Loic Poulain <loic.poulain@linaro.org>
Acked-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://patch.msgid.link/20250212-mhi-wwan-mbim-sequence-glitch-v1-1-503735977cbd@linaro.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The header clearly states that it does not want to be included directly,
only via '<linux/(platform_)?device.h>'. Which is already present, so
delete the superfluous include.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Acked-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>
Link: https://patch.msgid.link/20250210113710.52071-2-wsa+renesas@sang-engineering.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Currently, the driver is seriously broken with respect to the
hibernation (S4): after image restore the device is back into
IPC_MEM_EXEC_STAGE_BOOT (which AFAIK means bootloader stage) and needs
full re-launch of the rest of its firmware, but the driver restore
handler treats the device as merely sleeping and just sends it a
wake-up command.
This wake-up command times out but device nodes (/dev/wwan*) remain
accessible.
However attempting to use them causes the bootloader to crash and
enter IPC_MEM_EXEC_STAGE_CD_READY stage (which apparently means "a crash
dump is ready").
It seems that the device cannot be re-initialized from this crashed
stage without toggling some reset pin (on my test platform that's
apparently what the device _RST ACPI method does).
While it would theoretically be possible to rewrite the driver to tear
down the whole MUX / IPC layers on hibernation (so the bootloader does
not crash from improper access) and then re-launch the device on
restore this would require significant refactoring of the driver
(believe me, I've tried), since there are quite a few assumptions
hard-coded in the driver about the device never being partially
de-initialized (like channels other than devlink cannot be closed,
for example).
Probably this would also need some programming guide for this hardware.
Considering that the driver seems orphaned [1] and other people are
hitting this issue too [2] fix it by simply unbinding the PCI driver
before hibernation and re-binding it after restore, much like
USB_QUIRK_RESET_RESUME does for USB devices that exhibit a similar
problem.
Tested on XMM7360 in HP EliteBook 855 G7 both with s2idle (which uses
the existing suspend / resume handlers) and S4 (which uses the new code).
[1]: https://lore.kernel.org/all/c248f0b4-2114-4c61-905f-466a786bdebb@leemhuis.info/
[2]:
https://github.com/xmm7360/xmm7360-pci/issues/211#issuecomment-1804139413
Reviewed-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>
Signed-off-by: Maciej S. Szmigiero <mail@maciej.szmigiero.name>
Link: https://patch.msgid.link/e60287ebdb0ab54c4075071b72568a40a75d0205.1736372610.git.mail@maciej.szmigiero.name
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Cross-merge networking fixes after downstream PR (net-6.13-rc6).
No conflicts.
Adjacent changes:
include/linux/if_vlan.h
f91a5b808938 ("af_packet: fix vlan_get_protocol_dgram() vs MSG_PEEK")
3f330db30638 ("net: reformat kdoc return statements")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
ipc_mmio_init() used the post-decrement operator in its loop continuing
condition of "retries" counter being "> 0", which meant that when this
condition caused loop exit "retries" counter reached -1.
But the later valid exec stage failure check only tests for "retries"
counter being exactly zero, so it didn't trigger in this case (but
would wrongly trigger if the code reaches a valid exec stage in the
very last loop iteration).
Fix this by using the pre-decrement operator instead, so the loop counter
is exactly zero on valid exec stage failure.
Fixes: dc0514f5d828 ("net: iosm: mmio scratchpad")
Signed-off-by: Maciej S. Szmigiero <mail@maciej.szmigiero.name>
Link: https://patch.msgid.link/8b19125a825f9dcdd81c667c1e5c48ba28d505a6.1735490770.git.mail@maciej.szmigiero.name
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
When driver processes the internal state change command, it use an
asynchronous thread to process the command operation. If the main
thread detects that the task has timed out, the asynchronous thread
will panic when executing the completion notification because the
main thread completion object has been released.
BUG: unable to handle page fault for address: fffffffffffffff8
PGD 1f283a067 P4D 1f283a067 PUD 1f283c067 PMD 0
Oops: 0000 [#1] PREEMPT SMP NOPTI
RIP: 0010:complete_all+0x3e/0xa0
[...]
Call Trace:
<TASK>
? __die_body+0x68/0xb0
? page_fault_oops+0x379/0x3e0
? exc_page_fault+0x69/0xa0
? asm_exc_page_fault+0x22/0x30
? complete_all+0x3e/0xa0
fsm_main_thread+0xa3/0x9c0 [mtk_t7xx (HASH:1400 5)]
? __pfx_autoremove_wake_function+0x10/0x10
kthread+0xd8/0x110
? __pfx_fsm_main_thread+0x10/0x10 [mtk_t7xx (HASH:1400 5)]
? __pfx_kthread+0x10/0x10
ret_from_fork+0x38/0x50
? __pfx_kthread+0x10/0x10
ret_from_fork_asm+0x1b/0x30
</TASK>
[...]
CR2: fffffffffffffff8
---[ end trace 0000000000000000 ]---
Use the reference counter to ensure safe release as Sergey suggests:
https://lore.kernel.org/all/da90f64c-260a-4329-87bf-1f9ff20a5951@gmail.com/
Fixes: 13e920d93e37 ("net: wwan: t7xx: Add core components")
Signed-off-by: Jinjian Song <jinjian.song@fibocom.com>
Acked-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>
Link: https://patch.msgid.link/20241224041552.8711-1-jinjian.song@fibocom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
pcim_iomap_regions() and pcim_iomap_table() have been deprecated by the
PCI subsystem.
Replace them with pcim_iomap_region().
Additionally, pass the actual driver name to that function to improve
debug output.
Signed-off-by: Philipp Stanner <pstanner@redhat.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>
Link: https://patch.msgid.link/20241206195712.182282-2-pstanner@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Because optimizing the power consumption of t7XX,
change auto suspend time to 5000.
The Tests uses a script to loop through the power_state
of t7XX.
(for example: /sys/bus/pci/devices/0000\:72\:00.0/power_state)
* If Auto suspend is 20 seconds,
test script show power_state have 0~5% of the time was in D3 state
when host don't have data packet transmission.
* Changed auto suspend time to 5 seconds,
test script show power_state have 50%~80% of the time was in D3 state
when host don't have data packet transmission.
We tested Fibocom FM350 and our products using the t7xx and they all
benefited from this.
Signed-off-by: Jack Wu <wojackbb@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>
Link: https://patch.msgid.link/20241114102002.481081-1-wojackbb@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Cross-merge networking fixes after downstream PR (net-6.12-rc7).
Conflicts:
drivers/net/ethernet/freescale/enetc/enetc_pf.c
e15c5506dd39 ("net: enetc: allocate vf_state during PF probes")
3774409fd4c6 ("net: enetc: build enetc_pf_common.c as a separate module")
https://lore.kernel.org/20241105114100.118bd35e@canb.auug.org.au
Adjacent changes:
drivers/net/ethernet/ti/am65-cpsw-nuss.c
de794169cf17 ("net: ethernet: ti: am65-cpsw: Fix multi queue Rx on J7")
4a7b2ba94a59 ("net: ethernet: ti: am65-cpsw: Use tstats instead of open coded version")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add support for userspace to enable/disable the debug ports(ADB,MIPC).
- ADB port: /dev/wwan0adb0
- MIPC port: /dev/wwan0mipc0
Application can use ADB (Android Debug Bridge) port to implement
functions (shell, pull, push ...) by ADB protocol commands.
E.g., ADB commands:
- A_OPEN: OPEN(local-id, 0, "destination")
- A_WRTE: WRITE(local-id, remote-id, "data")
- A_OKEY: READY(local-id, remote-id, "")
- A_CLSE: CLOSE(local-id, remote-id, "")
Link: https://android.googlesource.com/platform/packages/modules/adb/+/refs/heads/main/README.md
Application can use MIPC (Modem Information Process Center) port
to debug antenna tuner or noise profiling through this MTK modem
diagnostic interface.
By default, debug ports are not exposed, so using the command
to enable or disable debug ports.
Enable debug ports:
- enable: 'echo 1 > /sys/bus/pci/devices/${bdf}/t7xx_debug_ports
Disable debug ports:
- disable: 'echo 0 > /sys/bus/pci/devices/${bdf}/t7xx_debug_ports
Signed-off-by: Jinjian Song <jinjian.song@fibocom.com>
Reviewed-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Add new WWAN ports that connect to the device's ADB protocol interface
and MTK MIPC diagnostic interface.
Signed-off-by: Jinjian Song <jinjian.song@fibocom.com>
Reviewed-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
The error path in t7xx_dpmaif_rx_buf_alloc(), free and unmap the already
allocated and mapped skb in a loop, but the loop condition terminates when
the index reaches zero, which fails to free the first allocated skb at
index zero.
Check with i-- so that skb at index 0 is freed as well.
Cc: stable@vger.kernel.org
Fixes: d642b012df70 ("net: wwan: t7xx: Add data path interface")
Acked-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>
Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://patch.msgid.link/20241101025316.3234023-1-ruanjinjie@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Both gcc-14 and clang-18 report that passing a non-string literal as the
format argument of dev_set_name() is potentially insecure.
E.g. clang-18 says:
drivers/net/wwan/wwan_core.c:442:34: warning: format string is not a string literal (potentially insecure) [-Wformat-security]
442 | return dev_set_name(&port->dev, buf);
| ^~~
drivers/net/wwan/wwan_core.c:442:34: note: treat the string as an argument to avoid this
442 | return dev_set_name(&port->dev, buf);
| ^
| "%s",
It is always the case where the contents of mod is safe to pass as the
format argument. That is, in my understanding, it never contains any
format escape sequences.
But, it seems better to be safe than sorry. And, as a bonus, compiler
output becomes less verbose by addressing this issue as suggested by
clang-18.
Compile tested only.
No functional change intended.
Signed-off-by: Simon Horman <horms@kernel.org>
Acked-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>
Link: https://patch.msgid.link/20241023-wwan-fmt-v1-1-521b39968639@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Cross-merge networking fixes after downstream PR.
No conflicts and no adjacent changes.
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
The variable wwan_rtnl_link_ops assign a *bigger* maxtype which leads to
a global out-of-bounds read when parsing the netlink attributes. Exactly
same bug cause as the oob fixed in commit b33fb5b801c6 ("net: qualcomm:
rmnet: fix global oob in rmnet_policy").
==================================================================
BUG: KASAN: global-out-of-bounds in validate_nla lib/nlattr.c:388 [inline]
BUG: KASAN: global-out-of-bounds in __nla_validate_parse+0x19d7/0x29a0 lib/nlattr.c:603
Read of size 1 at addr ffffffff8b09cb60 by task syz.1.66276/323862
CPU: 0 PID: 323862 Comm: syz.1.66276 Not tainted 6.1.70 #1
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.13.0-1ubuntu1.1 04/01/2014
Call Trace:
<TASK>
__dump_stack lib/dump_stack.c:88 [inline]
dump_stack_lvl+0x177/0x231 lib/dump_stack.c:106
print_address_description mm/kasan/report.c:284 [inline]
print_report+0x14f/0x750 mm/kasan/report.c:395
kasan_report+0x139/0x170 mm/kasan/report.c:495
validate_nla lib/nlattr.c:388 [inline]
__nla_validate_parse+0x19d7/0x29a0 lib/nlattr.c:603
__nla_parse+0x3c/0x50 lib/nlattr.c:700
nla_parse_nested_deprecated include/net/netlink.h:1269 [inline]
__rtnl_newlink net/core/rtnetlink.c:3514 [inline]
rtnl_newlink+0x7bc/0x1fd0 net/core/rtnetlink.c:3623
rtnetlink_rcv_msg+0x794/0xef0 net/core/rtnetlink.c:6122
netlink_rcv_skb+0x1de/0x420 net/netlink/af_netlink.c:2508
netlink_unicast_kernel net/netlink/af_netlink.c:1326 [inline]
netlink_unicast+0x74b/0x8c0 net/netlink/af_netlink.c:1352
netlink_sendmsg+0x882/0xb90 net/netlink/af_netlink.c:1874
sock_sendmsg_nosec net/socket.c:716 [inline]
__sock_sendmsg net/socket.c:728 [inline]
____sys_sendmsg+0x5cc/0x8f0 net/socket.c:2499
___sys_sendmsg+0x21c/0x290 net/socket.c:2553
__sys_sendmsg net/socket.c:2582 [inline]
__do_sys_sendmsg net/socket.c:2591 [inline]
__se_sys_sendmsg+0x19e/0x270 net/socket.c:2589
do_syscall_x64 arch/x86/entry/common.c:51 [inline]
do_syscall_64+0x45/0x90 arch/x86/entry/common.c:81
entry_SYSCALL_64_after_hwframe+0x63/0xcd
RIP: 0033:0x7f67b19a24ad
RSP: 002b:00007f67b17febb8 EFLAGS: 00000246 ORIG_RAX: 000000000000002e
RAX: ffffffffffffffda RBX: 00007f67b1b45f80 RCX: 00007f67b19a24ad
RDX: 0000000000000000 RSI: 0000000020005e40 RDI: 0000000000000004
RBP: 00007f67b1a1e01d R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000
R13: 00007ffd2513764f R14: 00007ffd251376e0 R15: 00007f67b17fed40
</TASK>
The buggy address belongs to the variable:
wwan_rtnl_policy+0x20/0x40
The buggy address belongs to the physical page:
page:ffffea00002c2700 refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0xb09c
flags: 0xfff00000001000(reserved|node=0|zone=1|lastcpupid=0x7ff)
raw: 00fff00000001000 ffffea00002c2708 ffffea00002c2708 0000000000000000
raw: 0000000000000000 0000000000000000 00000001ffffffff 0000000000000000
page dumped because: kasan: bad access detected
page_owner info is not present (never set?)
Memory state around the buggy address:
ffffffff8b09ca00: 05 f9 f9 f9 05 f9 f9 f9 00 01 f9 f9 00 01 f9 f9
ffffffff8b09ca80: 00 00 00 05 f9 f9 f9 f9 00 00 03 f9 f9 f9 f9 f9
>ffffffff8b09cb00: 00 00 00 00 05 f9 f9 f9 00 00 00 00 f9 f9 f9 f9
^
ffffffff8b09cb80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
==================================================================
According to the comment of `nla_parse_nested_deprecated`, use correct size
`IFLA_WWAN_MAX` here to fix this issue.
Fixes: 88b710532e53 ("wwan: add interface creation support")
Signed-off-by: Lin Ma <linma@zju.edu.cn>
Reviewed-by: Loic Poulain <loic.poulain@linaro.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20241015131621.47503-1-linma@zju.edu.cn
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
After commit 0edb555a65d1 ("platform: Make platform_driver::remove()
return void") .remove() is (again) the right callback to implement for
platform drivers.
Convert all platform drivers below drivers/net after the previous
conversion commits apart from the wireless drivers to use .remove(),
with the eventual goal to drop struct platform_driver::remove_new(). As
.remove() and .remove_new() have the same prototypes, conversion is done
by just changing the structure member name in the driver initializer.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>
Acked-by: Stefan Schmidt <stefan@datenfreihafen.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
It's important to undo pm_runtime_use_autosuspend() with
pm_runtime_dont_use_autosuspend() at driver exit time.
But the pm_runtime_disable() and pm_runtime_dont_use_autosuspend()
is missing in the error path for bam_dmux_probe(). So add it.
Found by code review. Compile-tested only.
Fixes: 21a0ffd9b38c ("net: wwan: Add Qualcomm BAM-DMUX WWAN network driver")
Suggested-by: Stephan Gerhold <stephan.gerhold@linaro.org>
Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com>
Reviewed-by: Stephan Gerhold <stephan.gerhold@linaro.org>
Reviewed-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
WWAN device is programmed to boot in normal mode or fastboot mode,
when triggering a device reset through ACPI call or fastboot switch
command. Maintain state machine synchronization and reprobe logic
after a device reset.
The PCIe device reset triggered by several ways.
E.g.:
- fastboot: echo "fastboot_switching" > /sys/bus/pci/devices/${bdf}/t7xx_mode.
- reset: echo "reset" > /sys/bus/pci/devices/${bdf}/t7xx_mode.
- IRQ: PCIe device request driver to reset itself by an interrupt request.
Use pci_reset_function() as a generic way to reset device, save and
restore the PCIe configuration before and after reset device to ensure
the reprobe process.
Suggestion from Bjorn:
Link: https://lore.kernel.org/all/20230127133034.GA1364550@bhelgaas/
Signed-off-by: Jinjian Song <jinjian.song@fibocom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char / misc and other driver updates from Greg KH:
"Here is the "big" set of char/misc and other driver subsystem changes
for 6.11-rc1. Nothing major in here, just loads of new drivers and
updates. Included in here are:
- IIO api updates and new drivers added
- wait_interruptable_timeout() api cleanups for some drivers
- MODULE_DESCRIPTION() additions for loads of drivers
- parport out-of-bounds fix
- interconnect driver updates and additions
- mhi driver updates and additions
- w1 driver fixes
- binder speedups and fixes
- eeprom driver updates
- coresight driver updates
- counter driver update
- new misc driver additions
- other minor api updates
All of these, EXCEPT for the final Kconfig build fix for 32bit
systems, have been in linux-next for a while with no reported issues.
The Kconfig fixup went in 29 hours ago, so might have missed the
latest linux-next, but was acked by everyone involved"
* tag 'char-misc-6.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (330 commits)
misc: Kconfig: exclude mrvl-cn10k-dpi compilation for 32-bit systems
misc: delete Makefile.rej
binder: fix hang of unregistered readers
misc: Kconfig: add a new dependency for MARVELL_CN10K_DPI
virtio: add missing MODULE_DESCRIPTION() macro
agp: uninorth: add missing MODULE_DESCRIPTION() macro
spmi: add missing MODULE_DESCRIPTION() macros
dev/parport: fix the array out-of-bounds risk
samples: configfs: add missing MODULE_DESCRIPTION() macro
misc: mrvl-cn10k-dpi: add Octeon CN10K DPI administrative driver
misc: keba: Fix missing AUXILIARY_BUS dependency
slimbus: Fix struct and documentation alignment in stream.c
MAINTAINERS: CC dri-devel list on Qualcomm FastRPC patches
misc: fastrpc: use coherent pool for untranslated Compute Banks
misc: fastrpc: support complete DMA pool access to the DSP
misc: fastrpc: add missing MODULE_DESCRIPTION() macro
misc: fastrpc: Add missing dev_err newlines
misc: fastrpc: Use memdup_user()
nvmem: core: Implement force_ro sysfs attribute
nvmem: Use sysfs_emit() for type attribute
...
|
|
add support for Dell DW5933e (0x14c0, 0x4d75)
Signed-off-by: Jack Wu <wojackbb@gmail.com>
Link: https://patch.msgid.link/20240716024902.16054-1-wojackbb@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/mani/mhi into char-misc-next
Manivannan writes:
MHI Host
========
- Used unique 'mhi_pci_dev_info' struct for product families instead of reusing
a shared struct. This allows displaying the actual product name for the MHI
devices during driver probe.
- Added support for Foxconn SDX72 based modems, T99W515 and DW5934E.
- Added a 'name' field to 'struct mhi_controller' for allowing the MHI client
drivers to uniquely identify each MHI device based on its product/device name.
This is useful in applying any device specific quirks in the client drivers.
WWAN MHI Client driver
======================
- Due to the build dependency with the MHI patch exposing 'name' field to client
drivers, the WWAN MHI client driver patch that is making use of the 'name'
field to apply custom data mux id for Foxconn modems is also included.
Collected Ack from Networking maintainer for this patch.
MHI EP
======
- Fixed the MHI EP stack to not allocate memory for MHI objects from DMA zone.
This was done accidentally while adding the slab cache support and causes the
MHI EP stack to run out of memory while doing high bandwidth transfers.
* tag 'mhi-for-v6.11' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/mani/mhi:
net: wwan: mhi: make default data link id configurable
bus: mhi: host: Allow controller drivers to specify name for the MHI controller
bus: mhi: host: Add support for Foxconn SDX72 modems
bus: mhi: host: pci_generic: Use unique 'mhi_pci_dev_info' for product families
bus: mhi: ep: Do not allocate memory for MHI objects from DMA zone
|
|
For SDX72 MBIM mode, it starts data mux id from 112 instead of 0.
This would lead to device can't ping outside successfully.
Also MBIM side would report "bad packet session (112)". In order
to fix this issue, we decide to use the device name of MHI
controller to do a match in wwan side. Then wwan driver could
set a corresponding mux_id value according to the MHI product.
Signed-off-by: Slark Xiao <slark_xiao@163.com>
Acked-by: Jakub Kicinski <kuba@kernel.org>
Link: https://lore.kernel.org/r/20240701021216.17734-3-slark_xiao@163.com
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
|
|
In case of region creation fail in ipc_devlink_create_region(), previously
created regions delete process starts from tainted pointer which actually
holds error code value.
Fix this bug by decreasing region index before delete.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Fixes: 4dcd183fbd67 ("net: wwan: iosm: devlink registration")
Signed-off-by: Aleksandr Mishin <amishin@t-argos.ru>
Acked-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20240604082500.20769-1-amishin@t-argos.ru
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Embedding net_device into structures prohibits the usage of flexible
arrays in the net_device structure. For more details, see the discussion
at [1].
Un-embed the net_device from the private struct by converting it
into a pointer. Then use the leverage the new alloc_netdev_dummy()
helper to allocate and initialize dummy devices.
[1] https://lore.kernel.org/all/20240229225910.79e224cf@kernel.org/
Signed-off-by: Breno Leitao <leitao@debian.org>
Link: https://lore.kernel.org/r/20240424161108.3397057-1-leitao@debian.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Extend devlink_param *set function pointer to take extack as a param.
Sometimes it is needed to pass information to the end user from set
function. It is more proper to use for that netlink instead of passing
message to dmesg.
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Signed-off-by: Mateusz Polchlopek <mateusz.polchlopek@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
Core in mhi_driver_register() already sets the .owner, so driver
does not need to.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>
Link: https://lore.kernel.org/r/20240327174810.519676-2-krzysztof.kozlowski@linaro.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Some of the registers are aligned on a 32bit boundary, causing
alignment faults on 64bit platforms.
Unable to handle kernel paging request at virtual address ffffffc084a1d004
Mem abort info:
ESR = 0x0000000096000061
EC = 0x25: DABT (current EL), IL = 32 bits
SET = 0, FnV = 0
EA = 0, S1PTW = 0
FSC = 0x21: alignment fault
Data abort info:
ISV = 0, ISS = 0x00000061, ISS2 = 0x00000000
CM = 0, WnR = 1, TnD = 0, TagAccess = 0
GCS = 0, Overlay = 0, DirtyBit = 0, Xs = 0
swapper pgtable: 4k pages, 39-bit VAs, pgdp=0000000046ad6000
[ffffffc084a1d004] pgd=100000013ffff003, p4d=100000013ffff003, pud=100000013ffff003, pmd=0068000020a00711
Internal error: Oops: 0000000096000061 [#1] SMP
Modules linked in: mtk_t7xx(+) qcserial pppoe ppp_async option nft_fib_inet nf_flow_table_inet mt7921u(O) mt7921s(O) mt7921e(O) mt7921_common(O) iwlmvm(O) iwldvm(O) usb_wwan rndis_host qmi_wwan pppox ppp_generic nft_reject_ipv6 nft_reject_ipv4 nft_reject_inet nft_reject nft_redir nft_quota nft_numgen nft_nat nft_masq nft_log nft_limit nft_hash nft_flow_offload nft_fib_ipv6 nft_fib_ipv4 nft_fib nft_ct nft_chain_nat nf_tables nf_nat nf_flow_table nf_conntrack mt7996e(O) mt792x_usb(O) mt792x_lib(O) mt7915e(O) mt76_usb(O) mt76_sdio(O) mt76_connac_lib(O) mt76(O) mac80211(O) iwlwifi(O) huawei_cdc_ncm cfg80211(O) cdc_ncm cdc_ether wwan usbserial usbnet slhc sfp rtc_pcf8563 nfnetlink nf_reject_ipv6 nf_reject_ipv4 nf_log_syslog nf_defrag_ipv6 nf_defrag_ipv4 mt6577_auxadc mdio_i2c libcrc32c compat(O) cdc_wdm cdc_acm at24 crypto_safexcel pwm_fan i2c_gpio i2c_smbus industrialio i2c_algo_bit i2c_mux_reg i2c_mux_pca954x i2c_mux_pca9541 i2c_mux_gpio i2c_mux dummy oid_registry tun sha512_arm64 sha1_ce sha1_generic seqiv
md5 geniv des_generic libdes cbc authencesn authenc leds_gpio xhci_plat_hcd xhci_pci xhci_mtk_hcd xhci_hcd nvme nvme_core gpio_button_hotplug(O) dm_mirror dm_region_hash dm_log dm_crypt dm_mod dax usbcore usb_common ptp aquantia pps_core mii tpm encrypted_keys trusted
CPU: 3 PID: 5266 Comm: kworker/u9:1 Tainted: G O 6.6.22 #0
Hardware name: Bananapi BPI-R4 (DT)
Workqueue: md_hk_wq t7xx_fsm_uninit [mtk_t7xx]
pstate: 804000c5 (Nzcv daIF +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
pc : t7xx_cldma_hw_set_start_addr+0x1c/0x3c [mtk_t7xx]
lr : t7xx_cldma_start+0xac/0x13c [mtk_t7xx]
sp : ffffffc085d63d30
x29: ffffffc085d63d30 x28: 0000000000000000 x27: 0000000000000000
x26: 0000000000000000 x25: ffffff80c804f2c0 x24: ffffff80ca196c05
x23: 0000000000000000 x22: ffffff80c814b9b8 x21: ffffff80c814b128
x20: 0000000000000001 x19: ffffff80c814b080 x18: 0000000000000014
x17: 0000000055c9806b x16: 000000007c5296d0 x15: 000000000f6bca68
x14: 00000000dbdbdce4 x13: 000000001aeaf72a x12: 0000000000000001
x11: 0000000000000000 x10: 0000000000000000 x9 : 0000000000000000
x8 : ffffff80ca1ef6b4 x7 : ffffff80c814b818 x6 : 0000000000000018
x5 : 0000000000000870 x4 : 0000000000000000 x3 : 0000000000000000
x2 : 000000010a947000 x1 : ffffffc084a1d004 x0 : ffffffc084a1d004
Call trace:
t7xx_cldma_hw_set_start_addr+0x1c/0x3c [mtk_t7xx]
t7xx_fsm_uninit+0x578/0x5ec [mtk_t7xx]
process_one_work+0x154/0x2a0
worker_thread+0x2ac/0x488
kthread+0xe0/0xec
ret_from_fork+0x10/0x20
Code: f9400800 91001000 8b214001 d50332bf (f9000022)
---[ end trace 0000000000000000 ]---
The inclusion of io-64-nonatomic-lo-hi.h indicates that all 64bit
accesses can be replaced by pairs of nonatomic 32bit access. Fix
alignment by forcing all accesses to be 32bit on 64bit platforms.
Link: https://forum.openwrt.org/t/fibocom-fm350-gl-support/142682/72
Fixes: 39d439047f1d ("net: wwan: t7xx: Add control DMA interface")
Signed-off-by: Bjørn Mork <bjorn@mork.no>
Reviewed-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>
Tested-by: Liviu Dudau <liviu@dudau.co.uk>
Link: https://lore.kernel.org/r/20240322144000.1683822-1-bjorn@mork.no
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Since commit 43a7206b0963 ("driver core: class: make class_register() take
a const *"), the driver core allows for struct class to be in read-only
memory, so move the wwan_class structure to be declared at build time
placing it into read-only memory, instead of having to be dynamically
allocated at boot time.
Suggested-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Ricardo B. Marliere <ricardo@marliere.net>
Acked-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>
Link: https://lore.kernel.org/r/20240302-class_cleanup-net-next-v1-5-8fa378595b93@marliere.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Since commit 43a7206b0963 ("driver core: class: make class_register() take
a const *"), the driver core allows for struct class to be in read-only
memory, so move the wwan_hwsim_class structure to be declared at build time
placing it into read-only memory, instead of having to be dynamically
allocated at boot time.
Suggested-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Ricardo B. Marliere <ricardo@marliere.net>
Acked-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>
Link: https://lore.kernel.org/r/20240302-class_cleanup-net-next-v1-4-8fa378595b93@marliere.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
This is an effort to get rid of all multiplications from allocation
functions in order to prevent integer overflows [1][2].
As the "port_prox" variable is a pointer to "struct port_proxy" and
this structure ends in a flexible array:
struct port_proxy {
[...]
struct t7xx_port ports[];
};
the preferred way in the kernel is to use the struct_size() helper to
do the arithmetic instead of the argument "size + size * count" in the
devm_kzalloc() function.
This way, the code is more readable and safer.
Link: https://www.kernel.org/doc/html/latest/process/deprecated.html#open-coded-arithmetic-in-allocator-arguments [1]
Link: https://github.com/KSPP/linux/issues/160 [2]
Signed-off-by: Erick Archer <erick.archer@gmx.com>
Reviewed-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>
Link: https://lore.kernel.org/r/20240224181932.2720-1-erick.archer@gmx.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Since commit aed65af1cc2f ("drivers: make device_type const"), the driver
core can properly handle constant struct device_type. Move the wwan_type
variable to be a constant structure as well, placing it into read-only
memory which can not be modified at runtime.
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Ricardo B. Marliere <ricardo@marliere.net>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
