| Age | Commit message (Collapse) | Author |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux
Pull gpio updates from Bartosz Golaszewski:
"There's one new driver, lots of various updates to existing ones, some
refactoring support for new models and misc tweaks and fixes.
The biggest new feature in GPIO core is adding support for managed,
enable-counted sharing of GPIO pins, something that - until now - was
only hacked around with the GPIOD_FLAGS_BIT_NONEXCLUSIVE request flag
which basically allowed drivers to "fight it out" for the descriptor
and provided no synchronization. It was enabled on Qualcomm platforms
(and thus is enabled on arm64 defconfig) and I plan on removing
GPIOD_FLAGS_BIT_NONEXCLUSIVE once all drivers using it are switched to
the new mechanism.
GPIO core:
- add proper support for shared GPIOs that's aiming to replace the
current sharing mechanism (which provides no synchronization ot
enable counting) and enable it for Qualcomm platforms
- improve the software node GPIO lookup by using the fwnode
representation instead of the software node's name which was prone
to bugs (GPIO controllers don't have to use the software node's
name as their kernel label)
- remove the last user of legacy-of-mm-gpiochip.h and drop the header
- move closer to removing the legacy gpio_request_one() routine
- rename some symbols for consistency
- shrink GPIO printk() helpers by reusing existing code
- remove some redundant kernel messages
- use min() instead of min_t() in GPIO ACPI code
- use system_percpu_wq instead of system_wq in GPIO character device
code
New drivers:
- add a driver for the QIXIS FPGA GPIO controller
Driver improvements:
- use modernized variants of power management macros across a wide
array of drivers in order to avoid having to use the __maybe_unused
attribute
- convert gpio-elkhartlake and reset-gpio to using the auxiliary bus
instead of the platform bus as they are not really described in
firmware
- use lock guards and update symbol prefixes in gpio-mmio
- support the bryx radio interface kit in gpio-mpsse + refactor the
driver
- use software nodes for configuring the reset-gpio driver, including
setting up the reference to the shared "reset" pin
- check and propagate the return value of gpiod_set_value() to
user-space in gpio-virtuser (this was previously not possible as
this function returned void)
- extend the gpio-regmap helper with more features (bypass cache for
aliased inputs, force writes for aliased data registers, add a new
configuration parameter)
- remove unneeded includes from gpio-aspeed and gpio-latch
- add support for Tegra410 to gpio-tegra186
- replace PCI-specific PM with generic device-level PM in gpio-bt8xx
- use dynamic GPIO range allocation in gpio-loongson-64bit
- improve handling of level-triggered interrupts in gpio-pca953x
- add suspend/resume support to gpio-fxl6408
- add support for more models to gpio-menz127
- optimize gpio-mvebu interrupt handling by avoiding unnecessary
calls to mvebu_gpio_irq_handler()
- make locking more consistent in gpio-grgpio
Device-tree bindings:
- document new NXP and Microchip models
Documentation:
- add a comprehensive compatibility and feature list for
gpio-pca953x, which is a great addition as it's probably the most
commonly used GPIO expander driver
- kernel-doc tweaks
Late fixes:
- use BYTE_CTRL_MODE for 2K2000/3000 models in gpio-loongson"
* tag 'gpio-updates-for-v6.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux: (80 commits)
gpio: loongson: Switch 2K2000/3000 GPIO to BYTE_CTRL_MODE
gpio: regmap: fix kernel-doc notation
gpio: shared: fix a deadlock
gpio: shared-proxy: set suppress_bind_attrs
gpio: shared: ignore GPIO hogs when traversing the device tree
gpio: shared: ignore special __symbols__ node when traversing device tree
gpio: shared: handle the reset-gpios corner case
gpio: zynq: Use modern PM macros
gpio: xilinx: Use modern PM macros
gpio: xgene: Use modern PM macros
gpio: uniphier: Use modern PM macros
gpio: tqmx86: Use modern PM macros
gpio: pch: Use modern PM macros
gpio: omap: Use modern PM macros
gpio: msc313: Use modern PM macros
gpio: mlxbf2: Use modern PM macros
gpio: ml-ioh: Use modern PM macros
gpio: pl061: Use modern PM macros
gpio: htc-egpio: Use modern PM macros
gpio: brcmstb: Use modern PM macros
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86
Pull platform driver fixes from Ilpo Järvinen:
- arm64/thinkpad-t14s-ec:
- Fix IRQ race condition
- Sleep after EC access
- intel/punit_ipc: Fix memory corruption
* tag 'platform-drivers-x86-v6.18-5' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86:
platform/x86: intel: punit_ipc: fix memory corruption
platform: arm64: thinkpad-t14s-ec: sleep after EC access
platform: arm64: thinkpad-t14s-ec: fix IRQ race condition
|
|
This passes the address of the pointer "&punit_ipcdev" when the intent
was to pass the pointer itself "punit_ipcdev" (without the ampersand).
This means that the:
complete(&ipcdev->cmd_complete);
in intel_punit_ioc() will write to a wrong memory address corrupting it.
Fixes: fdca4f16f57d ("platform:x86: add Intel P-Unit mailbox IPC driver")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Link: https://patch.msgid.link/aSCmoBipSQ_tlD-D@stanley.mountain
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
https://git.pengutronix.de/git/pza/linux into gpio/for-next
Reset/GPIO/swnode changes for v6.19 (v2)
* Fix chtwc_int33fe build issue since commit d7cdbbc93c56 ("software
node: allow referencing firmware nodes").
|
|
Members of struct software_node_ref_args should not be dereferenced
directly but set using the provided macros. Commit d7cdbbc93c56
("software node: allow referencing firmware nodes") changed the name of
the software node member and caused a build failure. Remove all direct
dereferences of the ref struct as a fix.
However, this driver also seems to abuse the software node interface by
waiting for a node with an arbitrary name "intel-xhci-usb-sw" to appear
in the system before setting up the reference for the I2C device, while
the actual software node already exists in the intel-xhci-usb-role-switch
module and should be used to set up a static reference. Add a FIXME for
a future improvement.
Fixes: d7cdbbc93c56 ("software node: allow referencing firmware nodes")
Fixes: 53c24c2932e5 ("platform/x86: intel_cht_int33fe: use inline reference properties")
Cc: stable@vger.kernel.org
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Closes: https://lore.kernel.org/all/20251121111534.7cdbfe5c@canb.auug.org.au/
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Reviewed-by: Hans de Goede <johannes.goede@oss.qualcomm.com>
Acked-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
|
|
into gpio/for-next
Reset/GPIO/swnode changes for v6.19
* Extend software node implementation, allowing its properties to reference
existing firmware nodes.
* Update the GPIO property interface to use reworked swnode macros.
* Rework reset-gpio code to use GPIO lookup via swnode.
* Fix spi-cs42l43 driver to work with swnode changes.
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86
Pull x86 platform driver fixes from Ilpo Järvinen:
"This one has lots of new HW entries which adds to the size in diffstat
but the individual changes are simple.
Fixes
- acer-wmi: Ignore backlight event
- alienware-wmi-wmax: Fix quirk match table order & drop redundant
entries
- amd/pmc:
- Add Xbox Ally to spurious 8042 quirk list
- Quirk list Lenovo Legion Go 2 NVMe resume
- msi-wmi-platform:
- Correct GUID to uppercase
- GUID is uncleverly copy-pasted from an example so add a DMI
whitelist
- intel/speed_select_if: PCIBIOS_* return code conversion
- intel-uncore-freq & ISST: Fix kernel doc warnings
New HW support
- alienware-wmi-wmax:
- Alienware 16 Aurora support
- Alienware M support
- Alienware X support
- Dell G support
- amd/pmc:
- ROG Xbox Ally (non-X) support
- huaway-wmi: HONOR MagicBoox X16/X14 PrintScreen & YOYO keys
- hp-wmi:
- Omen 16-wf1xxx fan support
- Omen MAX 16-ah0xx fan + thermal profile support
- Victus 16-r0 and 16-s0 fan + thermal profile support
- intel/hid: Intel Nova Lake support
- intel-uncore-freq:
- Intel Panther Lake support
- Intel Wildcat Lake support
- Intel Nova Lake support"
* tag 'platform-drivers-x86-v6.18-4' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86: (21 commits)
platform/x86: intel-uncore-freq: fix all header kernel-doc warnings
platform/x86: acer-wmi: Ignore backlight event
platform/x86/intel/speed_select_if: Convert PCIBIOS_* return codes to errnos
platform/x86/intel/hid: Add Nova Lake support
platform/x86: alienware-wmi-wmax: Add AWCC support to Alienware 16 Aurora
platform/x86: hp-wmi: Add Omen MAX 16-ah0xx fan support and thermal profile
platform/x86: msi-wmi-platform: Fix typo in WMI GUID
platform/x86: msi-wmi-platform: Only load on MSI devices
platform/x86/amd: pmc: Add Lenovo Legion Go 2 to pmc quirk list
platform/x86/amd/pmc: Add spurious_8042 to Xbox Ally
platform/x86/amd/pmc: Add support for Van Gogh SoC
platform/x86: alienware-wmi-wmax: Add support for the whole "G" family
platform/x86: alienware-wmi-wmax: Add support for the whole "X" family
platform/x86: alienware-wmi-wmax: Add support for the whole "M" family
platform/x86: alienware-wmi-wmax: Drop redundant DMI entries
platform/x86: alienware-wmi-wmax: Fix "Alienware m16 R1 AMD" quirk order
platform/x86: ISST: isst_if.h: fix all kernel-doc warnings
platform/x86: intel-uncore-freq: Add additional client processors
platform/x86: hp-wmi: Add Omen 16-wf1xxx fan support
platform/x86: huawei-wmi: add keys for HONOR models
...
|
|
Intel Elkhart Lake Programmable Service Engine (PSE) includes two PCI
devices that expose two different capabilities of GPIO and Timed I/O
as a single PCI function through shared MMIO with below layout.
GPIO: 0x0000 - 0x1000
TIO: 0x1000 - 0x2000
This driver enumerates the PCI parent device and creates auxiliary child
devices for these capabilities. The actual functionalities are provided
by their respective auxiliary drivers.
Signed-off-by: Raag Jadav <raag.jadav@intel.com>
Acked-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20251112034040.457801-2-raag.jadav@intel.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
|
|
In file uncore-frequency/uncore-frequency-common.h,
correct all kernel-doc warnings by adding missing leading " *" to some
lines, adding a missing kernel-doc entry, and fixing a name typo.
Warning: uncore-frequency-common.h:50 bad line:
Storage for kobject attribute elc_low_threshold_percent
Warning: uncore-frequency-common.h:52 bad line:
Storage for kobject attribute elc_high_threshold_percent
Warning: uncore-frequency-common.h:54 bad line:
Storage for kobject attribute elc_high_threshold_enable
Warning: uncore-frequency-common.h:92 struct member
'min_freq_khz_kobj_attr' not described in 'uncore_data'
Warning: uncore-frequency-common.h:92 struct member
'die_id_kobj_attr' not described in 'uncore_data'
Fixes: 24b6616355f7 ("platform/x86/intel-uncore-freq: Add efficiency latency control to sysfs interface")
Fixes: 416de0246f35 ("platform/x86: intel-uncore-freq: Fix types in sysfs callbacks")
Fixes: 247b43fcd872 ("platform/x86/intel-uncore-freq: Add attributes to show die_id")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Link: https://patch.msgid.link/20251111060938.1998542-1-rdunlap@infradead.org
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
On the Acer Nitro AN515-58, the event 4 - 0 is send by the ACPI
firmware when the backlight up/down keys are pressed. Ignore this
event to avoid spamming the kernel log with error messages, as the
acpi-video driver already handles brightness up/down events.
Reported-by: Bugaddr <Bugaddr@protonmail.com>
Closes: https://bugaddr.tech/posts/2025-11-16-debugging-the-acer-nitro-5-an515-58-fn-f10-keyboard-backlight-bug-on-linux/#wmi-interface-issues
Tested-by: Bugaddr <Bugaddr@protonmail.com>
Signed-off-by: Armin Wolf <W_Armin@gmx.de>
Link: https://patch.msgid.link/20251117155938.3030-1-W_Armin@gmx.de
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
isst_if_probe() uses pci_read_config_dword() that returns PCIBIOS_*
codes. The return code is returned from the probe function as is but
probe functions should return normal errnos. A proper implementation
can be found in drivers/leds/leds-ss4200.c.
Convert PCIBIOS_* return codes using pcibios_err_to_errno() into
normal errno before returning.
Fixes: d3a23584294c ("platform/x86: ISST: Add Intel Speed Select mmio interface")
Signed-off-by: Haotian Zhang <vulab@iscas.ac.cn>
Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Link: https://patch.msgid.link/20251117033354.132-1-vulab@iscas.ac.cn
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
Add ACPI ID for Nova Lake.
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Link: https://patch.msgid.link/20251110235041.123685-1-srinivas.pandruvada@linux.intel.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
Add AWCC support to Alienware 16 Aurora
Cc: stable@vger.kernel.org
Signed-off-by: Anthony Wong <anthony.wong@ubuntu.com>
Reviewed-by: Kurt Borja <kuurtb@gmail.com>
Link: https://patch.msgid.link/20251116185311.18074-1-anthony.wong@canonical.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
New HP Omen laptops follow the same WMI thermal profile as Victus
16-r1000 and 16-s1000.
Add DMI board 8D41 to victus_s_thermal_profile_boards.
Signed-off-by: Marcos Vega <marcosmola2@gmail.com>
Link: https://patch.msgid.link/20251108114739.9255-3-marcosmola2@gmail.com
[ij: changelog taken partially from v1]
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
The WMI driver core only supports GUID strings containing only
uppercase characters, however the GUID string used by the
msi-wmi-platform driver contains a single lowercase character.
This prevents the WMI driver core from matching said driver to
its WMI device.
Fix this by turning the lowercase character into a uppercase
character. Also update the WMI driver development guide to warn
about this.
Reported-by: Antheas Kapenekakis <lkml@antheas.dev>
Fixes: 9c0beb6b29e7 ("platform/x86: wmi: Add MSI WMI Platform driver")
Tested-by: Antheas Kapenekakis <lkml@antheas.dev>
Signed-off-by: Armin Wolf <W_Armin@gmx.de>
Link: https://patch.msgid.link/20251110111253.16204-3-W_Armin@gmx.de
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
It turns out that the GUID used by the msi-wmi-platform driver
(ABBC0F60-8EA1-11D1-00A0-C90629100000) is not unique, but was instead
copied from the WIndows Driver Samples. This means that this driver
could load on devices from other manufacturers that also copied this
GUID, potentially causing hardware errors.
Prevent this by only loading on devices whitelisted via DMI. The DMI
matches where taken from the msi-ec driver.
Reported-by: Antheas Kapenekakis <lkml@antheas.dev>
Fixes: 9c0beb6b29e7 ("platform/x86: wmi: Add MSI WMI Platform driver")
Tested-by: Antheas Kapenekakis <lkml@antheas.dev>
Signed-off-by: Armin Wolf <W_Armin@gmx.de>
Link: https://patch.msgid.link/20251110111253.16204-2-W_Armin@gmx.de
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
The Lenovo Legion Go 2 takes a long time to resume from suspend.
This is due to it having an nvme resume handler that interferes
with IOMMU mappings. It is a common issue with older Lenovo
laptops. Adding it to that quirk list fixes this issue.
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/4618
Suggested-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Antheas Kapenekakis <lkml@antheas.dev>
Reviewed-by: Mario Limonciello (AMD) <superm1@kernel.org>
Link: https://patch.msgid.link/20251008135057.731928-1-lkml@antheas.dev
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
The Xbox Ally features a Van Gogh SoC that has spurious interrupts
during resume. We get the following logs:
atkbd_receive_byte: 20 callbacks suppressed
atkbd serio0: Spurious ACK on isa0060/serio0. Some program might be trying to access hardware directly.
So, add the spurious_8042 quirk for it. It does not have a keyboard, so
this does not result in any functional loss.
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/4659
Signed-off-by: Antheas Kapenekakis <lkml@antheas.dev>
Reviewed-by: Mario Limonciello (AMD) <superm1@kernel.org>
Link: https://patch.msgid.link/20251024152152.3981721-3-lkml@antheas.dev
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
The ROG Xbox Ally (non-X) SoC features a similar architecture to the
Steam Deck. While the Steam Deck supports S3 (s2idle causes a crash),
this support was dropped by the Xbox Ally which only S0ix suspend.
Since the handler is missing here, this causes the device to not suspend
and the AMD GPU driver to crash while trying to resume afterwards due to
a power hang.
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/4659
Signed-off-by: Antheas Kapenekakis <lkml@antheas.dev>
Reviewed-by: Mario Limonciello (AMD) <superm1@kernel.org>
Acked-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Link: https://patch.msgid.link/20251024152152.3981721-2-lkml@antheas.dev
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
Add support for the whole "Dell G" laptop family.
Cc: stable@vger.kernel.org
Signed-off-by: Kurt Borja <kuurtb@gmail.com>
Link: https://patch.msgid.link/20251103-family-supp-v1-5-a241075d1787@gmail.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
Add support for the whole "Alienware X" laptop family.
Cc: stable@vger.kernel.org
Signed-off-by: Kurt Borja <kuurtb@gmail.com>
Link: https://patch.msgid.link/20251103-family-supp-v1-4-a241075d1787@gmail.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
Add support for the whole "Alienware M" laptop family.
Cc: stable@vger.kernel.org
Signed-off-by: Kurt Borja <kuurtb@gmail.com>
Link: https://patch.msgid.link/20251103-family-supp-v1-3-a241075d1787@gmail.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
The awcc_dmi_table[] uses DMI_MATCH() that supports partial matches. As
there is already "Alienware Area-51m" entry, "Alienware Area-51m R2" entry
is redundant.
Signed-off-by: Kurt Borja <kuurtb@gmail.com>
Link: https://patch.msgid.link/20251103-family-supp-v1-2-a241075d1787@gmail.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
Quirks are matched using dmi_first_match(), therefore move the
"Alienware m16 R1 AMD" entry above other m16 entries.
Reported-by: Cihan Ozakca <cozakca@outlook.com>
Fixes: e2468dc70074 ("Revert "platform/x86: alienware-wmi-wmax: Add G-Mode support to Alienware m16 R1"")
Cc: stable@vger.kernel.org
Signed-off-by: Kurt Borja <kuurtb@gmail.com>
Link: https://patch.msgid.link/20251103-family-supp-v1-1-a241075d1787@gmail.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
Add Intel uncore frequency driver support for Pantherlake, Wildcatlake
and Novalake processors.
Signed-off-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Link: https://patch.msgid.link/20251022211733.3565526-1-sathyanarayanan.kuppuswamy@linux.intel.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
The newer HP Omen laptops, such as Omen 16-wf1xxx, use the same
WMI-based thermal profile interface as Victus 16-r1000 and 16-s1000
models.
Add the DMI board name "8C78" to the victus_s_thermal_profile_boards
list to enable proper fan and thermal mode control.
Tested on: HP Omen 16-wf1xxx (board 8C78)
Result:
* Fan RPMs are readable
* echo 0 | sudo tee /sys/devices/platform/hp-wmi/hwmon/*/pwm1_enable
allows the fans to run on max RPM.
Signed-off-by: Krishna Chomal <krishna.chomal108@gmail.com>
Link: https://patch.msgid.link/20251018111001.56625-1-krishna.chomal108@gmail.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
HONOR MagicBook X16/X14 models produced in 2025 cannot use the Print
Screen and YOYO keys properly, with the system reporting them as
unknown key presses (codes: 0x028b and 0x028e).
To resolve this, a key_entry is added for both the HONOR Print Screen
key and the HONOR YOYO key, ensuring they function correctly on these
models.
Signed-off-by: Ston Jia <ston.jia@outlook.com>
Link: https://patch.msgid.link/20251029051804.220111-1-ston.jia@outlook.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
thermal profile support
This patch adds Victus 16-r0 (8bbe) and Victus 16-s0(8bd4, 8bd5) laptop
DMI board name into existing list
Signed-off-by: Edip Hazuri <edip@medip.dev>
Link: https://patch.msgid.link/20251015181042.23961-3-edip@medip.dev
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86
Pull x86 platform driver fixes from Ilpo Järvinen:
"Fixes and New Hotkey Support:
- input + dell-wmi-base: Electronic privacy screen on/off hotkey
support
- int3472: Fix unregister double free
- wireless-hotkey: Fix Kconfig typo"
* tag 'platform-drivers-x86-v6.18-3' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86:
platform: x86: Kconfig: fix minor typo in help for WIRELESS_HOTKEY
platform/x86: dell-wmi-base: Handle electronic privacy screen on/off events
Input: Add keycodes for electronic privacy screen on/off hotkeys
MAINTAINERS: Update int3472 maintainers
platform/x86: int3472: Fix double free of GPIO device during unregister
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media
Pull media fixes from Mauro Carvalho Chehab:
- honour privacy led with pdx86/int3472
- fix invalid file access on cx18 and ivtv
- forbid remove_bufs when legacy fileio is active on videbuf2
- add an heuristic to find stream entity on uvcvideo
* tag 'media/v6.18-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media:
media: videobuf2: forbid remove_bufs when legacy fileio is active
media: uvcvideo: Use heuristic to find stream entity
media: v4l2-subdev / pdx86: int3472: Use "privacy" as con_id for the privacy LED
media: ivtv: Fix invalid access to file *
media: cx18: Fix invalid access to file *
|
|
Fixed a misspelling of Xiaomi.
Signed-off-by: Lazar Aleksic <kripticni.dev@gmail.com>
Link: https://patch.msgid.link/20251028180956.10753-1-kripticni.dev@gmail.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
Add handling for events for the electronic privacy screen found on some
models (e.g. Dell Latitude 7300) being toggled on/off.
Emit KEY_EPRIVACY_SCREEN_OFF / KEY_EPRIVACY_SCREEN_ON events for this so
that userspace can show the usual on-screen-display (OSD) notification for
eprivacy screen on/off to the user.
Signed-off-by: Hans de Goede <hansg@kernel.org>
Link: https://patch.msgid.link/20251020152331.52870-3-hansg@kernel.org
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
regulator_unregister() already frees the associated GPIO device. On
ThinkPad X9 (Lunar Lake), this causes a double free issue that leads to
random failures when other drivers (typically Intel THC) attempt to
allocate interrupts. The root cause is that the reference count of the
pinctrl_intel_platform module unexpectedly drops to zero when this
driver defers its probe.
This behavior can also be reproduced by unloading the module directly.
Fix the issue by removing the redundant release of the GPIO device
during regulator unregistration.
Cc: stable@vger.kernel.org
Fixes: 1e5d088a52c2 ("platform/x86: int3472: Stop using devm_gpiod_get()")
Signed-off-by: Qiu Wenbo <qiuwenbo@kylinsec.com.cn>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Reviewed-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Hans de Goede <hansg@kernel.org>
Reviewed-by: Daniel Scally <dan.scally@ideasonboard.com>
Link: https://patch.msgid.link/20251028063009.289414-1-qiuwenbo@gnome.org
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
During DT-binding review for extending the V4L2 camera sensor privacy LED
support to systems using devicetree, it has come up that having a "-led"
suffix for the LED name / con_id is undesirable since it already is clear
that it is a LED.
Drop the "-led" suffix from the con_id in both the lookup table in
the int3472 code, as well as from the con_id led_get() argument in
the v4l2-subdev code.
Signed-off-by: Hans de Goede <hansg@kernel.org>
Acked-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
Makes alienware-wmi load on G15 5530 by default
Cc: stable@vger.kernel.org
Signed-off-by: Saumya <admin@trix.is-a.dev>
Reviewed-by: Kurt Borja <kuurtb@gmail.com>
Link: https://patch.msgid.link/20250925034010.31414-1-admin@trix.is-a.dev
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
Devices without the AWCC interface don't initialize `awcc`. Add a check
before dereferencing it in sleep handlers.
Cc: stable@vger.kernel.org
Reported-by: Gal Hammer <galhammer@gmail.com>
Tested-by: Gal Hammer <galhammer@gmail.com>
Fixes: 07ac275981b1 ("platform/x86: alienware-wmi-wmax: Add support for manual fan control")
Signed-off-by: Kurt Borja <kuurtb@gmail.com>
Link: https://patch.msgid.link/20251014-sleep-fix-v3-1-b5cb58da4638@gmail.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86
Pull x86 platform driver updates from Ilpo Järvinen:
- amd/pmf:
- Add support for adjusting PMF PPT and PPT APU thresholds
- Extend custom BIOS inputs for more policies
- Update ta_pmf_action structure to the latest PMF TA
- arm64:
- thinkpad-t14s-ec: Add EC driver for ThinkPad T14s Gen6 Snapdragon
- int3472:
- Increase handshake GPIO delay
- intel/pmc:
- SSRAM support for Lunar Lake and Panther Lake
- Support reading substate requirements data from S0ix blockers
(for platforms starting from Panther Lake)
- Wildcat Lake support
- intel-uncore-freq:
- Solve duplicate sysfs entry warnings
- Present unique domain ID per package
- portwell-ec:
- Support suspend/resume
- Add hwmon support for voltage and temperature
- redmi-wmi:
- Add WMI driver for Redmibook keyboard
- think-lmi:
- Certificate support for ThinkCenter
- x86-android-tables + others:
- Convert away from legacy GPIO APIs
- x86-android-tables:
- Add support for Acer A1-840 tablet
- Fix modules list for Lenovo devices
- Stop using EPROBE_DEFER
- Miscellaneous cleanups / refactoring / improvements
* tag 'platform-drivers-x86-v6.18-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86: (63 commits)
platform/x86: pcengines-apuv2: Use static device properties
platform/x86: meraki-mx100: Use static device properties
platform/x86: barco-p50-gpio: use software nodes for gpio-leds/keys
platform/x86: x86-android-tablets: Stop using EPROBE_DEFER
platform/x86: x86-android-tablets: Fix modules lists for Lenovo devices
platform/x86: x86-android-tablets: Simplify lenovo_yoga_tab2_830_1050_exit()
platform/x86: x86-android-tablets: Add support for Acer A1-840 tablet
platform/x86: x86-android-tablets: Move Acer info to its own file
platform/x86: x86-android-tablets: Update my email address
platform/x86: x86-android-tablets: Simplify node-group [un]registration
platform/x86: x86-android-tablets: use swnode_group instead of manual registering
platform/x86: x86-android-tablets: replace bat_swnode with swnode_group
platform/x86: x86-android-tablets: convert gpio_keys devices to GPIO references
platform/x86: x86-android-tablets: remove support for GPIO lookup tables
platform/x86: x86-android-tablets: convert Yoga Tab2 fast charger to GPIO references
platform/x86: x86-android-tablets: convert HID-I2C devices to GPIO references
platform/x86: x86-android-tablets: convert wm1502 devices to GPIO references
platform/x86: x86-android-tablets: convert int3496 devices to GPIO references
platform/x86: x86-android-tablets: convert EDT devices to GPIO references
platform/x86: x86-android-tablets: convert Novatek devices to GPIO references
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 cpuid updates from Borislav Petkov:
- Make UMIP instruction detection more robust
- Correct and cleanup AMD CPU topology detection; document the relevant
CPUID leaves topology parsing precedence on AMD
- Add support for running the kernel as guest on FreeBSD's Bhyve
hypervisor
- Cleanups and improvements
* tag 'x86_cpu_for_v6.18_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/umip: Fix decoding of register forms of 0F 01 (SGDT and SIDT aliases)
x86/umip: Check that the instruction opcode is at least two bytes
Documentation/x86/topology: Detail CPUID leaves used for topology enumeration
x86/cpu/topology: Define AMD64_CPUID_EXT_FEAT MSR
x86/cpu/topology: Check for X86_FEATURE_XTOPOLOGY instead of passing has_xtopology
x86/cpu/cacheinfo: Simplify cacheinfo_amd_init_llc_id() using _cpuid4_info
x86/cpu: Rename and move CPU model entry for Diamond Rapids
x86/cpu: Detect FreeBSD Bhyve hypervisor
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86
Pull x86 platform driver fixes from Ilpo Järvinen:
"Fixes and New HW Supoort
- amd/pmc: Use 8042 quirk for Stellaris Slim Gen6 AMD
- dell: Set USTT mode according to BIOS after reboot
- dell-lis3lv02d: Add Latitude E6530
- lg-laptop: Fix setting the fan mode"
* tag 'platform-drivers-x86-v6.17-5' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86:
platform/x86: lg-laptop: Fix WMAB call in fan_mode_store()
platform/x86: dell-lis3lv02d: Add Latitude E6530
platform/x86/dell: Set USTT mode according to BIOS after reboot
platform/x86/amd/pmc: Add Stellaris Slim Gen6 AMD to spurious 8042 quirks list
|
|
Convert the PC Engines APUv2/v3 board driver to use software nodes
and static device properties for its on-board LEDs and front button.
This change replaces the legacy gpiod_lookup_table and platform_data
with a modern software node implementation, which allows the leds-gpio
and gpio-keys drivers to use the standard device properties API.
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Link: https://patch.msgid.link/yaaegm5z2vtkl6ci5jpfnv42aywfjtoqw3bjgtli43ypask2r6@a7gg37rwkpx2
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
Convert the Meraki MX100 board driver to use software nodes and static
device properties to describe the on-board LEDs and reset button.
This moves away from the legacy gpiod_lookup_table and platform_data
mechanisms, allowing consumer drivers like leds-gpio and gpio-keys
to rely on the unified device properties interface instead of
board-specific data.
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Link: https://patch.msgid.link/dzecghqrsrbe74akboqih7xculdm53rbhxa7dimt2ysdevyskd@hxhd2j3vnlt5
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
In preparation of dropping support for legacy GPIO API from gpio-keys
switch the driver to use software nodes/properties to describe
GPIO-connected LED and button.
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Link: https://patch.msgid.link/2meuzip4qnxvle4bwk4hbow4j34ii3cwb46xd5inq5btif5mjg@iiygy6ir7vtr
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
Since the x86-android-tablets code uses platform_create_bundle() it cannot
use EPROBE_DEFER and the driver-core will translate EPROBE_DEFER to ENXIO.
Stop using EPROBE_DEFER instead log an error and return ENODEV, or for
non-fatal cases log a warning and return 0.
Reviewed-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Signed-off-by: Hans de Goede <hansg@kernel.org>
Link: https://patch.msgid.link/20250920200713.20193-21-hansg@kernel.org
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
2 fixes for Lenovo tablets:
- The bq24190 charger on the Lenovo Yoga Tab2 830/1050 devices does not use
the crystal-cove PMIC charger IRQ, so these shouldn't use bq24190_modules
as that includes "intel_crystal_cove_charger"
- Both the Tab2 and the Tab3 devices have a SPI audio-codec which init()
attaches properties to, resp. the whole SPI device gets instantiated by
the x86-android-tablets code. This requires the "spi_pxa2xx_platform"
module to be loaded before init() runs
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Signed-off-by: Hans de Goede <hansg@kernel.org>
Link: https://patch.msgid.link/20250920200713.20193-20-hansg@kernel.org
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
lenovo_yoga_tab2_830_1050_exit() only gets called after a successful
lenovo_yoga_tab2_830_1050_init() call so there is no need to check
if lenovo_yoga_tab2_830_1050_codec_[dev|pinctrl] are set.
Also change the exit() order to be the exact reverse of init().
Reviewed-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Signed-off-by: Hans de Goede <hansg@kernel.org>
Link: https://patch.msgid.link/20250920200713.20193-19-hansg@kernel.org
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
Add support for the Acer Iconia One 8 A1-840 (non FHD version) tablet.
This tablet has the usual issues for tablets shipped with Android as
factory OS. The DSDT is broken in various ways, so i2c_clients for
various devices as well as the INT3496 platform-device for OTG extcon
handling need to be instantiated manually by x86-android-tablets.
This tablet is special in that it is the first time a Bay Trail device
has been found to use the Dollar Cove TI PMIC and the first time that
the PMIC's Coulomb Counter is used as fuel-gauge.
So far this PMIC has only been used together with Cherry Trail SoCs
and always in combination with a separate full-featured fuel-gauge IC.
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Signed-off-by: Hans de Goede <hansg@kernel.org>
Link: https://patch.msgid.link/20250920200713.20193-18-hansg@kernel.org
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
Acer has several x86 based Android tablets which need x86-android-tablets
support to work around their broken ACPI tables.
At the moment x86-android-tablets only support one model, move this to
its own file before adding support for more models to avoid needing to
move more code around later.
Reviewed-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Signed-off-by: Hans de Goede <hansg@kernel.org>
Link: https://patch.msgid.link/20250920200713.20193-17-hansg@kernel.org
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
hdegoede@redhat.com will stop working soon, replace it with my kernel.org
address.
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Signed-off-by: Hans de Goede <hansg@kernel.org>
Link: https://patch.msgid.link/20250920200713.20193-16-hansg@kernel.org
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
software_node_register_node_group() / software_node_unregister_node_group()
both accept a NULL node-group as argument.
So there is no need to check for the node-group being NULL before calling
these functions, remove the checks to simplify the code.
Note the "if (gpio_button_swnodes)" check for registering is kept because
that also guards the creation of a gpio-button platform-device.
Suggested-by: Andy Shevchenko <andy@kernel.org>
Signed-off-by: Hans de Goede <hansg@kernel.org>
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Link: https://patch.msgid.link/20250920200713.20193-15-hansg@kernel.org
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
registering
Replace manually calling software_node_register_node_group() from init()
with the new swnode_group registration mechanism.
Note this also fixes a missing software_node_unregister_node_group()
for lenovo_yt3_swnodes.
Reviewed-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Signed-off-by: Hans de Goede <hansg@kernel.org>
Link: https://patch.msgid.link/20250920200713.20193-14-hansg@kernel.org
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
