| Age | Commit message (Collapse) | Author |
|---|
|
Not all system controller registers are accessible from Linux. Accessing
such registers generates synchronous external abort. Populate the
readable_reg and writeable_reg members of the regmap config to inform the
regmap core which registers can be accessed. The list will need to be
updated whenever new system controller functionality is exported through
regmap.
Fixes: 2da2740fb9c8 ("soc: renesas: rz-sysc: Add syscon/regmap support")
Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://patch.msgid.link/20251105070526.264445-3-claudiu.beznea.uj@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
|
|
The RZ/G3E system controller has various registers that control or report
some properties specific to individual IPs. The regmap is registered as a
syscon device to allow these IP drivers to access the registers through the
regmap API.
As other RZ SoCs might have custom read/write callbacks or max-offsets,
register a custom regmap configuration.
[claudiu.beznea:
- do not check the match->data validity in rz_sysc_probe() as it is
always valid
- dinamically allocate regmap_cfg]
Signed-off-by: John Madieu <john.madieu.xa@bp.renesas.com>
Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Reviewed-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Tested-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com> # on RZ/G3S
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/20250818162859.9661-2-john.madieu.xa@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
|
|
Add SoC identification for the RZ/V2N SoC using the System Controller
(SYS) block.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/20250415085438.83856-1-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
|
|
As per the other SoC variant of the same family, the system controller
provides SoC ID in its own registers.
Signed-off-by: John Madieu <john.madieu.xa@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/20250128031342.52675-5-john.madieu.xa@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
|
|
Add SoC detection support for the RZ/G3E SoC. Also add support for
detecting the number of cores and the ETHOS-U55 NPU, and also detect PLL
mismatch for SW settings other than 1.7GHz.
Signed-off-by: John Madieu <john.madieu.xa@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/20250128031342.52675-4-john.madieu.xa@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
|
|
Now that we have SoC detection in the RZ SYSC driver, move the RZ/G3S
SoC detection to it. The SYSC provides SoC ID in its own registers.
Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: John Madieu <john.madieu.xa@bp.renesas.com>
Link: https://lore.kernel.org/20250128031342.52675-3-john.madieu.xa@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
|
|
The RZ/G3S system controller (SYSC) has various registers that control
different functionalities. One of the exposed register offers
information about the SoC identification.
Add a driver that identifies the SoC. Later the driver will be extended
with other functionalities.
Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Signed-off-by: John Madieu <john.madieu.xa@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/20250128031342.52675-2-john.madieu.xa@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
|
