summaryrefslogtreecommitdiff
path: root/drivers/usb
AgeCommit message (Collapse)Author
4 daysMerge tag 'pull-persistency' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs Pull persistent dentry infrastructure and conversion from Al Viro: "Some filesystems use a kinda-sorta controlled dentry refcount leak to pin dentries of created objects in dcache (and undo it when removing those). A reference is grabbed and not released, but it's not actually _stored_ anywhere. That works, but it's hard to follow and verify; among other things, we have no way to tell _which_ of the increments is intended to be an unpaired one. Worse, on removal we need to decide whether the reference had already been dropped, which can be non-trivial if that removal is on umount and we need to figure out if this dentry is pinned due to e.g. unlink() not done. Usually that is handled by using kill_litter_super() as ->kill_sb(), but there are open-coded special cases of the same (consider e.g. /proc/self). Things get simpler if we introduce a new dentry flag (DCACHE_PERSISTENT) marking those "leaked" dentries. Having it set claims responsibility for +1 in refcount. The end result this series is aiming for: - get these unbalanced dget() and dput() replaced with new primitives that would, in addition to adjusting refcount, set and clear persistency flag. - instead of having kill_litter_super() mess with removing the remaining "leaked" references (e.g. for all tmpfs files that hadn't been removed prior to umount), have the regular shrink_dcache_for_umount() strip DCACHE_PERSISTENT of all dentries, dropping the corresponding reference if it had been set. After that kill_litter_super() becomes an equivalent of kill_anon_super(). Doing that in a single step is not feasible - it would affect too many places in too many filesystems. It has to be split into a series. This work has really started early in 2024; quite a few preliminary pieces have already gone into mainline. This chunk is finally getting to the meat of that stuff - infrastructure and most of the conversions to it. Some pieces are still sitting in the local branches, but the bulk of that stuff is here" * tag 'pull-persistency' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (54 commits) d_make_discardable(): warn if given a non-persistent dentry kill securityfs_recursive_remove() convert securityfs get rid of kill_litter_super() convert rust_binderfs convert nfsctl convert rpc_pipefs convert hypfs hypfs: swich hypfs_create_u64() to returning int hypfs: switch hypfs_create_str() to returning int hypfs: don't pin dentries twice convert gadgetfs gadgetfs: switch to simple_remove_by_name() convert functionfs functionfs: switch to simple_remove_by_name() functionfs: fix the open/removal races functionfs: need to cancel ->reset_work in ->kill_sb() functionfs: don't bother with ffs->ref in ffs_data_{opened,closed}() functionfs: don't abuse ffs_data_closed() on fs shutdown convert selinuxfs ...
5 daysMerge tag 'pmdomain-v6.19' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/linux-pm Pull pmdomain updates from Ulf Hansson: "pmdomain core: - Allow power-off for out-of-band wakeup-capable devices - Drop the redundant call to dev_pm_domain_detach() for the amba bus - Extend the genpd governor for CPUs to account for IPIs pmdomain providers: - bcm: Add support for BCM2712 - mediatek: Add support for MFlexGraphics power domains - mediatek: Add support for MT8196 power domains - qcom: Add RPMh power domain support for Kaanapali - rockchip: Add support for RV1126B pmdomain consumers: - usb: dwc3: Enable out of band wakeup for i.MX95 - usb: chipidea: Enable out of band wakeup for i.MX95" * tag 'pmdomain-v6.19' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/linux-pm: (26 commits) pmdomain: Extend the genpd governor for CPUs to account for IPIs smp: Introduce a helper function to check for pending IPIs pmdomain: mediatek: convert from clk round_rate() to determine_rate() amba: bus: Drop dev_pm_domain_detach() call pmdomain: bcm: bcm2835-power: Prepare to support BCM2712 pmdomain: mediatek: mtk-mfg: select MAILBOX in Kconfig pmdomain: mediatek: Add support for MFlexGraphics pmdomain: mediatek: Fix build-errors cpuidle: psci: Replace deprecated strcpy in psci_idle_init_cpu pmdomain: rockchip: Add support for RV1126B pmdomain: mediatek: Add support for MT8196 HFRPSYS power domains pmdomain: mediatek: Add support for MT8196 SCPSYS power domains pmdomain: mediatek: Add support for secure HWCCF infra power on pmdomain: mediatek: Add support for Hardware Voter power domains pmdomain: qcom: rpmhpd: Add RPMh power domain support for Kaanapali usb: dwc3: imx8mp: Set out of band wakeup for i.MX95 usb: chipidea: ci_hdrc_imx: Set out of band wakeup for i.MX95 usb: chipidea: core: detach power domain for ci_hdrc platform device pmdomain: core: Allow power-off for out-of-band wakeup-capable devices PM: wakeup: Add out-of-band system wakeup support for devices ...
7 daysMerge tag 'pm-6.19-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull power management updates from Rafael Wysocki: "There are quite a few interesting things here, including new hardware support, new features, some bug fixes and documentation updates. In addition, there are a usual bunch of minor fixes and cleanups all over. In the new hardware support category, there are intel_pstate and intel_rapl driver updates to support new processors, Panther Lake, Wildcat Lake, Noval Lake, and Diamond Rapids in the OOB mode, OPP and bandwidth allocation support in the tegra186 cpufreq driver, and JH7110S SOC support in dt-platdev cpufreq. The new features are the PM QoS CPU latency limit for suspend-to-idle, the netlink support for the energy model management, support for terminating system suspend via a wakeup event during the sync of file systems, configurable number of hibernation compression threads, the runtime PM auto-cleanup macros, and the "poweroff" PM event that is expected to be used during system shutdown. Bugs are mostly fixed in cpuidle governors, but there are also fixes elsewhere, like in the amd-pstate cpufreq driver. Documentation updates include, but are not limited to, a new doc on debugging shutdown hangs, cross-referencing fixes and cleanups in the intel_pstate documentation, and updates of comments in the core hibernation code. Specifics: - Introduce and document a QoS limit on CPU exit latency during wakeup from suspend-to-idle (Ulf Hansson) - Add support for building libcpupower statically (Zuo An) - Add support for sending netlink notifications to user space on energy model updates (Changwoo Mini, Peng Fan) - Minor improvements to the Rust OPP interface (Tamir Duberstein) - Fixes to scope-based pointers in the OPP library (Viresh Kumar) - Use residency threshold in polling state override decisions in the menu cpuidle governor (Aboorva Devarajan) - Add sanity check for exit latency and target residency in the cpufreq core (Rafael Wysocki) - Use this_cpu_ptr() where possible in the teo governor (Christian Loehle) - Rework the handling of tick wakeups in the teo cpuidle governor to increase the likelihood of stopping the scheduler tick in the cases when tick wakeups can be counted as non-timer ones (Rafael Wysocki) - Fix a reverse condition in the teo cpuidle governor and drop a misguided target residency check from it (Rafael Wysocki) - Clean up multiple minor defects in the teo cpuidle governor (Rafael Wysocki) - Update header inclusion to make it follow the Include What You Use principle (Andy Shevchenko) - Enable MSR-based RAPL PMU support in the intel_rapl power capping driver and arrange for using it on the Panther Lake and Wildcat Lake processors (Kuppuswamy Sathyanarayanan) - Add support for Nova Lake and Wildcat Lake processors to the intel_rapl power capping driver (Kaushlendra Kumar, Srinivas Pandruvada) - Add OPP and bandwidth support for Tegra186 (Aaron Kling) - Optimizations for parameter array handling in the amd-pstate cpufreq driver (Mario Limonciello) - Fix for mode changes with offline CPUs in the amd-pstate cpufreq driver (Gautham Shenoy) - Preserve freq_table_sorted across suspend/hibernate in the cpufreq core (Zihuan Zhang) - Adjust energy model rules for Intel hybrid platforms in the intel_pstate cpufreq driver and improve printing of debug messages in it (Rafael Wysocki) - Replace deprecated strcpy() in cpufreq_unregister_governor() (Thorsten Blum) - Fix duplicate hyperlink target errors in the intel_pstate cpufreq driver documentation and use :ref: directive for internal linking in it (Swaraj Gaikwad, Bagas Sanjaya) - Add Diamond Rapids OOB mode support to the intel_pstate cpufreq driver (Kuppuswamy Sathyanarayanan) - Use mutex guard for driver locking in the intel_pstate driver and eliminate some code duplication from it (Rafael Wysocki) - Replace udelay() with usleep_range() in ACPI cpufreq (Kaushlendra Kumar) - Minor improvements to various cpufreq drivers (Christian Marangi, Hal Feng, Jie Zhan, Marco Crivellari, Miaoqian Lin, and Shuhao Fu) - Replace snprintf() with scnprintf() in show_trace_dev_match() (Kaushlendra Kumar) - Fix memory allocation error handling in pm_vt_switch_required() (Malaya Kumar Rout) - Introduce CALL_PM_OP() macro and use it to simplify code in generic PM operations (Kaushlendra Kumar) - Add module param to backtrace all CPUs in the device power management watchdog (Sergey Senozhatsky) - Rework message printing in swsusp_save() (Rafael Wysocki) - Make it possible to change the number of hibernation compression threads (Xueqin Luo) - Clarify that only cgroup1 freezer uses PM freezer (Tejun Heo) - Add document on debugging shutdown hangs to PM documentation and correct a mistaken configuration option in it (Mario Limonciello) - Shut down wakeup source timer before removing the wakeup source from the list (Kaushlendra Kumar, Rafael Wysocki) - Introduce new PMSG_POWEROFF event for system shutdown handling with the help of PM device callbacks (Mario Limonciello) - Make pm_test delay interruptible by wakeup events (Riwen Lu) - Clean up kernel-doc comment style usage in the core hibernation code and remove unuseful comments from it (Sunday Adelodun, Rafael Wysocki) - Add support for handling wakeup events and aborting the suspend process while it is syncing file systems (Samuel Wu, Rafael Wysocki) - Add WQ_UNBOUND to pm_wq workqueue (Marco Crivellari) - Add runtime PM wrapper macros for ACQUIRE()/ACQUIRE_ERR() and use them in the PCI core and the ACPI TAD driver (Rafael Wysocki) - Improve runtime PM in the ACPI TAD driver (Rafael Wysocki) - Update pm_runtime_allow/forbid() documentation (Rafael Wysocki) - Fix typos in runtime.c comments (Malaya Kumar Rout) - Move governor.h from devfreq under include/linux/ and rename to devfreq-governor.h to allow devfreq governor definitions in out of drivers/devfreq/ (Dmitry Baryshkov) - Use min() to improve readability in tegra30-devfreq.c (Thorsten Blum) - Fix potential use-after-free issue of OPP handling in hisi_uncore_freq.c (Pengjie Zhang) - Fix typo in DFSO_DOWNDIFFERENTIAL macro name in governor_simpleondemand.c in devfreq (Riwen Lu)" * tag 'pm-6.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (96 commits) PM / devfreq: Fix typo in DFSO_DOWNDIFFERENTIAL macro name cpuidle: Warn instead of bailing out if target residency check fails cpuidle: Update header inclusion Documentation: power/cpuidle: Document the CPU system wakeup latency QoS cpuidle: Respect the CPU system wakeup QoS limit for cpuidle sched: idle: Respect the CPU system wakeup QoS limit for s2idle pmdomain: Respect the CPU system wakeup QoS limit for cpuidle pmdomain: Respect the CPU system wakeup QoS limit for s2idle PM: QoS: Introduce a CPU system wakeup QoS limit cpuidle: governors: teo: Add missing space to the description PM: hibernate: Extra cleanup of comments in swap handling code PM / devfreq: tegra30: use min to simplify actmon_cpu_to_emc_rate PM / devfreq: hisi: Fix potential UAF in OPP handling PM / devfreq: Move governor.h to a public header location powercap: intel_rapl: Enable MSR-based RAPL PMU support powercap: intel_rapl: Prepare read_raw() interface for atomic-context callers cpufreq: qcom-nvmem: fix compilation warning for qcom_cpufreq_ipq806x_match_list PM: sleep: Call pm_sleep_fs_sync() instead of ksys_sync_helper() PM: sleep: Add support for wakeup during filesystem sync cpufreq: ACPI: Replace udelay() with usleep_range() ...
2025-11-24usb: gadget: renesas_usbf: Handle devm_pm_runtime_enable() errorsHaotian Zhang
devm_pm_runtime_enable() can fail due to memory allocation. The current code ignores its return value, potentially causing pm_runtime_resume_and_get() to operate on uninitialized runtime PM state. Check the return value of devm_pm_runtime_enable() and return on failure. Fixes: 3e6e14ffdea4 ("usb: gadget: udc: add Renesas RZ/N1 USBF controller support") Signed-off-by: Haotian Zhang <vulab@iscas.ac.cn> Acked-by: Herve Codina <herve.codina@bootlin.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://patch.msgid.link/20251124022215.1619-1-vulab@iscas.ac.cn Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-11-22USB: storage: Remove subclass and protocol overrides from Novatek quirkAlan Stern
A report from Oleg Smirnov indicates that the unusual_devs quirks entry for the Novatek camera does not need to override the subclass and protocol parameters: [3266355.209532] usb 1-3: new high-speed USB device number 10 using xhci_hcd [3266355.333031] usb 1-3: New USB device found, idVendor=0603, idProduct=8611, bcdDevice= 1.00 [3266355.333040] usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [3266355.333043] usb 1-3: Product: YICARCAM [3266355.333045] usb 1-3: Manufacturer: XIAO-YI [3266355.333047] usb 1-3: SerialNumber: 966110000000100 [3266355.338621] usb-storage 1-3:1.0: USB Mass Storage device detected [3266355.338817] usb-storage 1-3:1.0: Quirks match for vid 0603 pid 8611: 4000 [3266355.338821] usb-storage 1-3:1.0: This device (0603,8611,0100 S 06 P 50) has unneeded SubClass and Protocol entries in unusual_devs.h (kernel 6.16.10-arch1-1) Please send a copy of this message to <linux-usb@vger.kernel.org> and <usb-storage@lists.one-eyed-alien.net> The overrides are harmless but they do provoke the driver into logging this annoying message. Update the entry to remove the unneeded entries. Reported-by: stealth <oleg.smirnov.1988@gmail.com> Closes: https://lore.kernel.org/CAKxjRRxhC0s19iEWoN=pEMqXJ_z8w_moC0GCXSqSKCcOddnWjQ@mail.gmail.com/ Fixes: 6ca8af3c8fb5 ("USB: storage: Add unusual-devs entry for Novatek NTK96550-based camera") Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Cc: stable <stable@kernel.org> Link: https://patch.msgid.link/b440f177-f0b8-4d5a-8f7b-10855d4424ee@rowland.harvard.edu Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-11-21usb: uas: fix urb unmapping issue when the uas device is remove during ↵Owen Gu
ongoing data transfer When a UAS device is unplugged during data transfer, there is a probability of a system panic occurring. The root cause is an access to an invalid memory address during URB callback handling. Specifically, this happens when the dma_direct_unmap_sg() function is called within the usb_hcd_unmap_urb_for_dma() interface, but the sg->dma_address field is 0 and the sg data structure has already been freed. The SCSI driver sends transfer commands by invoking uas_queuecommand_lck() in uas.c, using the uas_submit_urbs() function to submit requests to USB. Within the uas_submit_urbs() implementation, three URBs (sense_urb, data_urb, and cmd_urb) are sequentially submitted. Device removal may occur at any point during uas_submit_urbs execution, which may result in URB submission failure. However, some URBs might have been successfully submitted before the failure, and uas_submit_urbs will return the -ENODEV error code in this case. The current error handling directly calls scsi_done(). In the SCSI driver, this eventually triggers scsi_complete() to invoke scsi_end_request() for releasing the sgtable. The successfully submitted URBs, when being unlinked to giveback, call usb_hcd_unmap_urb_for_dma() in hcd.c, leading to exceptions during sg unmapping operations since the sg data structure has already been freed. This patch modifies the error condition check in the uas_submit_urbs() function. When a UAS device is removed but one or more URBs have already been successfully submitted to USB, it avoids immediately invoking scsi_done() and save the cmnd to devinfo->cmnd array. If the successfully submitted URBs is completed before devinfo->resetting being set, then the scsi_done() function will be called within uas_try_complete() after all pending URB operations are finalized. Otherwise, the scsi_done() function will be called within uas_zap_pending(), which is executed after usb_kill_anchored_urbs(). The error handling only takes effect when uas_queuecommand_lck() calls uas_submit_urbs() and returns the error value -ENODEV . In this case, the device is disconnected, and the flow proceeds to uas_disconnect(), where uas_zap_pending() is invoked to call uas_try_complete(). Fixes: eb2a86ae8c54 ("USB: UAS: fix disconnect by unplugging a hub") Cc: stable <stable@kernel.org> Signed-off-by: Yu Chen <chenyu45@xiaomi.com> Signed-off-by: Owen Gu <guhuinan@xiaomi.com> Acked-by: Oliver Neukum <oneukum@suse.com> Link: https://patch.msgid.link/20251120123336.3328-1-guhuinan@xiaomi.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-11-21usb: dwc3: Fix race condition between concurrent dwc3_remove_requests() call ↵Manish Nagar
paths This patch addresses a race condition caused by unsynchronized execution of multiple call paths invoking `dwc3_remove_requests()`, leading to premature freeing of USB requests and subsequent crashes. Three distinct execution paths interact with `dwc3_remove_requests()`: Path 1: Triggered via `dwc3_gadget_reset_interrupt()` during USB reset handling. The call stack includes: - `dwc3_ep0_reset_state()` - `dwc3_ep0_stall_and_restart()` - `dwc3_ep0_out_start()` - `dwc3_remove_requests()` - `dwc3_gadget_del_and_unmap_request()` Path 2: Also initiated from `dwc3_gadget_reset_interrupt()`, but through `dwc3_stop_active_transfers()`. The call stack includes: - `dwc3_stop_active_transfers()` - `dwc3_remove_requests()` - `dwc3_gadget_del_and_unmap_request()` Path 3: Occurs independently during `adb root` execution, which triggers USB function unbind and bind operations. The sequence includes: - `gserial_disconnect()` - `usb_ep_disable()` - `dwc3_gadget_ep_disable()` - `dwc3_remove_requests()` with `-ESHUTDOWN` status Path 3 operates asynchronously and lacks synchronization with Paths 1 and 2. When Path 3 completes, it disables endpoints and frees 'out' requests. If Paths 1 or 2 are still processing these requests, accessing freed memory leads to a crash due to use-after-free conditions. To fix this added check for request completion and skip processing if already completed and added the request status for ep0 while queue. Fixes: 72246da40f37 ("usb: Introduce DesignWare USB3 DRD Driver") Cc: stable <stable@kernel.org> Suggested-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com> Acked-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com> Signed-off-by: Manish Nagar <manish.nagar@oss.qualcomm.com> Link: https://patch.msgid.link/20251120074435.1983091-1-manish.nagar@oss.qualcomm.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-11-21xhci: dbgtty: fix device unregisterŁukasz Bartosik
When DbC is disconnected then xhci_dbc_tty_unregister_device() is called. However if there is any user space process blocked on write to DbC terminal device then it will never be signalled and thus stay blocked indifinitely. This fix adds a tty_vhangup() call in xhci_dbc_tty_unregister_device(). The tty_vhangup() wakes up any blocked writers and causes subsequent write attempts to DbC terminal device to fail. Cc: stable <stable@kernel.org> Fixes: dfba2174dc42 ("usb: xhci: Add DbC support in xHCI driver") Signed-off-by: Łukasz Bartosik <ukaszb@chromium.org> Link: https://patch.msgid.link/20251119212910.1245694-1-ukaszb@google.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-11-21usb: storage: sddr55: Reject out-of-bound new_pbaTianchu Chen
Discovered by Atuin - Automated Vulnerability Discovery Engine. new_pba comes from the status packet returned after each write. A bogus device could report values beyond the block count derived from info->capacity, letting the driver walk off the end of pba_to_lba[] and corrupt heap memory. Reject PBAs that exceed the computed block count and fail the transfer so we avoid touching out-of-range mapping entries. Signed-off-by: Tianchu Chen <flynnnchen@tencent.com> Cc: stable <stable@kernel.org> Link: https://patch.msgid.link/B2DC73A3EE1E3A1D+202511161322001664687@tencent.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-11-19usb: dwc3: imx8mp: Set out of band wakeup for i.MX95Peng Fan
i.MX95 DWC3 inside HSIOMIX could still wakeup Linux, even if HSIOMIX power domain(Digital logic) is off. There is still always on logic have the wakeup capability which is out band wakeup capbility. So use device_set_out_band_wakeup for i.MX95 to make sure DWC3 could wakeup system even if HSIOMIX power domain is in off state. Acked-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com> Tested-by: Xu Yang <xu.yang_2@nxp.com> Reviewed-by: Xu Yang <xu.yang_2@nxp.com> Signed-off-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2025-11-19usb: chipidea: ci_hdrc_imx: Set out of band wakeup for i.MX95Peng Fan
i.MX95 USB2 inside HSIOMIX could still wakeup Linux, even if HSIOMIX power domain(Digital logic) is off. There is still always on logic have the wakeup capability which is out band wakeup capbility. So use device_set_out_band_wakeup for i.MX95 to make sure usb2 could wakeup system even if HSIOMIX power domain is in off state. Tested-by: Xu Yang <xu.yang_2@nxp.com> Reviewed-by: Xu Yang <xu.yang_2@nxp.com> Signed-off-by: Peng Fan <peng.fan@nxp.com> Acked-by: Peter Chen <peter.chen@kernel.org> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2025-11-19usb: chipidea: core: detach power domain for ci_hdrc platform deviceXu Yang
When add a platform device by calling ci_hdrc_add_device(), this device will reuse OF node of its parent device. If power-domains property is provided in the OF node, both two platform devices will be attached to the same power domain. This should be unnecessary and may bring other inconsistent behavior. For example, to support wakeup capability, these two platform device need different power domain state. The parent device need NOT power domain on for out-band interrupt, but the ci_hdrc device need power domain on for in-band interrupt. The i.MX95 Soc support out-band wakeup interrupt, the user need to enable wakeup for the parent device, but if the user also enable wakeup for ci_hdrc device, the power domain will keep at on state finally. To exclude such inconsistent behavior and simplify the power management, detach power domain for ci_hdrc platform device. Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Xu Yang <xu.yang_2@nxp.com> Acked-by: Peter Chen <peter.chen@kernel.org> Tested-by: Xu Yang <xu.yang_2@nxp.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2025-11-17convert gadgetfsAl Viro
same as functionfs Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2025-11-17gadgetfs: switch to simple_remove_by_name()Al Viro
No need to return dentry from gadgetfs_create_file() or keep it around afterwards. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2025-11-17convert functionfsAl Viro
All files are regular; ep0 is there all along, other ep* may appear and go away during the filesystem lifetime; all of those are guaranteed to be gone by the time we umount it. Object creation is in ffs_sb_create_file(), removals - at ->kill_sb() time (for ep0) or by simple_remove_by_name() from ffs_epfiles_destroy() (for the rest of them). Switch ffs_sb_create_file() to simple_start_creating()/d_make_persistent()/ simple_done_creating() and that's it. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2025-11-17functionfs: switch to simple_remove_by_name()Al Viro
No need to return dentry from ffs_sb_create_file() or keep it around afterwards. To avoid subtle issues with getting to ffs from epfiles in ffs_epfiles_destroy(), pass the superblock as explicit argument. Callers have it anyway. Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2025-11-17functionfs: fix the open/removal racesAl Viro
ffs_epfile_open() can race with removal, ending up with file->private_data pointing to freed object. There is a total count of opened files on functionfs (both ep0 and dynamic ones) and when it hits zero, dynamic files get removed. Unfortunately, that removal can happen while another thread is in ffs_epfile_open(), but has not incremented the count yet. In that case open will succeed, leaving us with UAF on any subsequent read() or write(). The root cause is that ffs->opened is misused; atomic_dec_and_test() vs. atomic_add_return() is not a good idea, when object remains visible all along. To untangle that * serialize openers on ffs->mutex (both for ep0 and for dynamic files) * have dynamic ones use atomic_inc_not_zero() and fail if we had zero ->opened; in that case the file we are opening is doomed. * have the inodes of dynamic files marked on removal (from the callback of simple_recursive_removal()) - clear ->i_private there. * have open of dynamic ones verify they hadn't been already removed, along with checking that state is FFS_ACTIVE. Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2025-11-17functionfs: need to cancel ->reset_work in ->kill_sb()Al Viro
... otherwise we just might free ffs with ffs->reset_work still on queue. That needs to be done after ffs_data_reset() - that's the cutoff point for configfs accesses (serialized on gadget_info->lock), which is where the schedule_work() would come from. Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2025-11-17functionfs: don't bother with ffs->ref in ffs_data_{opened,closed}()Al Viro
A reference is held by the superblock (it's dropped in ffs_kill_sb()) and filesystem will not get to ->kill_sb() while there are any opened files, TYVM... Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2025-11-17functionfs: don't abuse ffs_data_closed() on fs shutdownAl Viro
ffs_data_closed() has a seriously confusing logics in it: in addition to the normal "decrement a counter and do some work if it hits zero" there's "... and if it has somehow become negative, do that" bit. It's not a race, despite smelling rather fishy. What really happens is that in addition to "call that on close of files there, to match the increments of counter on opens" there's one call in ->kill_sb(). Counter starts at 0 and never goes negative over the lifetime of filesystem (or we have much worse problems everywhere - ->release() call of some file somehow unpaired with successful ->open() of the same). At the filesystem shutdown it will be 0 or, again, we have much worse problems - filesystem instance destroyed with files on it still open. In other words, at that call and at that call alone the decrement would go from 0 to -1, hitting that chunk (and not hitting the "if it hits 0" part). So that check is a weirdly spelled "called from ffs_kill_sb()". Just expand the call in the latter and kill the misplaced chunk in ffs_data_closed(). Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2025-11-17Merge back earlier material related to system sleep for 6.19Rafael J. Wysocki
2025-11-14usb: sl811-hcd: Add PM_EVENT_POWEROFF into suspend callbacksMario Limonciello (AMD)
When the PM core uses hibernation callbacks for shutdown drivers will receive PM_EVENT_POWEROFF and should handle it the same as PM_EVENT_HIBERNATE would have been used. Tested-by: Eric Naim <dnaim@cachyos.org> Signed-off-by: Mario Limonciello (AMD) <superm1@kernel.org> [ rjw: Changelog adjustment ] Link: https://patch.msgid.link/20251112224025.2051702-4-superm1@kernel.org Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2025-11-12Merge tag 'usb-serial-6.18-rc6' of ↵Greg Kroah-Hartman
ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial into usb-linus Johan writes: USB serial devices ids for 6.18-rc6 Here are some more modem and ftdi device ids. All have been in linux-next with no reported issues. * tag 'usb-serial-6.18-rc6' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial: USB: serial: option: add support for Rolling RW101R-GL USB: serial: ftdi_sio: add support for u-blox EVK-M101
2025-11-10USB: serial: option: add support for Rolling RW101R-GLVanillan Wang
- VID:PID 33f8:0301, RW101R-GL for laptop debug M.2 cards (with MBIM interface for Linux/Chrome OS) 0x0301: mbim, pipe T: Bus=04 Lev=01 Prnt=01 Port=02 Cnt=01 Dev#= 2 Spd=5000 MxCh= 0 D: Ver= 3.20 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 9 #Cfgs= 1 P: Vendor=33f8 ProdID=0301 Rev=05.04 S: Manufacturer=Rolling Wireless S.a.r.l. S: Product=Rolling RW101R-GL Module S: SerialNumber=3ec4efdf C: #Ifs= 3 Cfg#= 1 Atr=a0 MxPwr=896mA I: If#= 0 Alt= 0 #EPs= 1 Cls=02(commc) Sub=0e Prot=00 Driver=cdc_mbim E: Ad=81(I) Atr=03(Int.) MxPS= 64 Ivl=32ms I: If#= 1 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim E: Ad=0f(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms E: Ad=8e(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms I: If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=40 Driver=option E: Ad=01(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms E: Ad=82(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms E: Ad=83(I) Atr=03(Int.) MxPS= 10 Ivl=32ms - VID:PID 33f8:01a8, RW101R-GL for laptop debug M.2 cards (with MBIM interface for Linux/Chrome OS) 0x01a8: mbim, diag, AT, ADB, pipe1, pipe2 T: Bus=04 Lev=01 Prnt=01 Port=02 Cnt=01 Dev#= 2 Spd=5000 MxCh= 0 D: Ver= 3.20 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 9 #Cfgs= 1 P: Vendor=33f8 ProdID=01a8 Rev=05.04 S: Manufacturer=Rolling Wireless S.a.r.l. S: Product=Rolling RW101R-GL Module S: SerialNumber=3ec4efdf C: #Ifs= 7 Cfg#= 1 Atr=a0 MxPwr=896mA I: If#= 0 Alt= 0 #EPs= 1 Cls=02(commc) Sub=0e Prot=00 Driver=cdc_mbim E: Ad=81(I) Atr=03(Int.) MxPS= 64 Ivl=32ms I: If#= 1 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim E: Ad=0f(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms E: Ad=8e(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms I: If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option E: Ad=01(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms E: Ad=82(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms I: If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option E: Ad=02(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms E: Ad=83(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms E: Ad=84(I) Atr=03(Int.) MxPS= 10 Ivl=32ms I: If#= 4 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=42 Prot=01 Driver=(none) E: Ad=03(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms E: Ad=85(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms I: If#= 5 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=40 Driver=option E: Ad=04(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms E: Ad=86(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms E: Ad=87(I) Atr=03(Int.) MxPS= 10 Ivl=32ms I: If#= 6 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=40 Driver=option E: Ad=05(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms E: Ad=88(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms E: Ad=89(I) Atr=03(Int.) MxPS= 10 Ivl=32ms - VID:PID 33f8:0302, RW101R-GL for laptop debug M.2 cards (with MBIM interface for Linux/Chrome OS) 0x0302: mbim, pipe T: Bus=03 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 6 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=33f8 ProdID=0302 Rev=05.04 S: Manufacturer=Rolling Wireless S.a.r.l. S: Product=Rolling RW101R-GL Module S: SerialNumber=3ec4efdf C: #Ifs= 3 Cfg#= 1 Atr=a0 MxPwr=500mA I: If#= 0 Alt= 0 #EPs= 1 Cls=02(commc) Sub=0e Prot=00 Driver=cdc_mbim E: Ad=81(I) Atr=03(Int.) MxPS= 64 Ivl=32ms I: If#= 1 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim E: Ad=0f(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=8e(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I: If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=40 Driver=option E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=83(I) Atr=03(Int.) MxPS= 10 Ivl=32ms - VID:PID 33f8:01a9, RW101R-GL for laptop debug M.2 cards (with MBIM interface for Linux/Chrome OS) 0x01a9: mbim, diag, AT, ADB, pipe1, pipe2 T: Bus=03 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=33f8 ProdID=01a9 Rev=05.04 S: Manufacturer=Rolling Wireless S.a.r.l. S: Product=Rolling RW101R-GL Module S: SerialNumber=3ec4efdf C: #Ifs= 7 Cfg#= 1 Atr=a0 MxPwr=500mA I: If#= 0 Alt= 0 #EPs= 1 Cls=02(commc) Sub=0e Prot=00 Driver=cdc_mbim E: Ad=81(I) Atr=03(Int.) MxPS= 64 Ivl=32ms I: If#= 1 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim E: Ad=0f(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=8e(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I: If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I: If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=84(I) Atr=03(Int.) MxPS= 10 Ivl=32ms I: If#= 4 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=42 Prot=01 Driver=(none) E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I: If#= 5 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=40 Driver=option E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=87(I) Atr=03(Int.) MxPS= 10 Ivl=32ms I: If#= 6 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=40 Driver=option E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=88(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=89(I) Atr=03(Int.) MxPS= 10 Ivl=32ms Signed-off-by: Vanillan Wang <vanillanwang@163.com> Cc: stable@vger.kernel.org [ johan: sort vendor entries, edit commit message slightly ] Signed-off-by: Johan Hovold <johan@kernel.org>
2025-11-09usb: typec: ucsi: psy: Set max current to zero when disconnectedJameson Thies
The ucsi_psy_get_current_max function defaults to 0.1A when it is not clear how much current the partner device can support. But this does not check the port is connected, and will report 0.1A max current when nothing is connected. Update ucsi_psy_get_current_max to report 0A when there is no connection. Fixes: af833e7f7db3 ("usb: typec: ucsi: psy: Set current max to 100mA for BC 1.2 and Default") Cc: stable@vger.kernel.org Signed-off-by: Jameson Thies <jthies@google.com> Reviewed-by: Benson Leung <bleung@chromium.org> Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com> Tested-by: Kenneth R. Crudup <kenny@panix.com> Rule: add Link: https://lore.kernel.org/stable/20251017000051.2094101-1-jthies%40google.com Link: https://patch.msgid.link/20251106011446.2052583-1-jthies@google.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-11-09usb: gadget: f_eem: Fix memory leak in eem_unwrapKuen-Han Tsai
The existing code did not handle the failure case of usb_ep_queue in the command path, potentially leading to memory leaks. Improve error handling to free all allocated resources on usb_ep_queue failure. This patch continues to use goto logic for error handling, as the existing error handling is complex and not easily adaptable to auto-cleanup helpers. kmemleak results: unreferenced object 0xffffff895a512300 (size 240): backtrace: slab_post_alloc_hook+0xbc/0x3a4 kmem_cache_alloc+0x1b4/0x358 skb_clone+0x90/0xd8 eem_unwrap+0x1cc/0x36c unreferenced object 0xffffff8a157f4000 (size 256): backtrace: slab_post_alloc_hook+0xbc/0x3a4 __kmem_cache_alloc_node+0x1b4/0x2dc kmalloc_trace+0x48/0x140 dwc3_gadget_ep_alloc_request+0x58/0x11c usb_ep_alloc_request+0x40/0xe4 eem_unwrap+0x204/0x36c unreferenced object 0xffffff8aadbaac00 (size 128): backtrace: slab_post_alloc_hook+0xbc/0x3a4 __kmem_cache_alloc_node+0x1b4/0x2dc __kmalloc+0x64/0x1a8 eem_unwrap+0x218/0x36c unreferenced object 0xffffff89ccef3500 (size 64): backtrace: slab_post_alloc_hook+0xbc/0x3a4 __kmem_cache_alloc_node+0x1b4/0x2dc kmalloc_trace+0x48/0x140 eem_unwrap+0x238/0x36c Fixes: 4249d6fbc10f ("usb: gadget: eem: fix echo command packet response issue") Cc: stable@kernel.org Signed-off-by: Kuen-Han Tsai <khtsai@google.com> Link: https://patch.msgid.link/20251103121814.1559719-1-khtsai@google.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-11-09usb: dwc3: pci: Sort out the Intel device IDsHeikki Krogerus
The PCI device IDs were organised based on the Intel architecture generation in most cases, but not with every ID. That left the device ID table with no real order. Sorting the table based on the device ID. Suggested-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com> Cc: stable <stable@kernel.org> Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Acked-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com> Link: https://patch.msgid.link/20251107121548.2702900-1-heikki.krogerus@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-11-09usb: dwc3: pci: add support for the Intel Nova Lake -SHeikki Krogerus
This patch adds the necessary PCI ID for Intel Nova Lake -S devices. Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Cc: stable <stable@kernel.org> Acked-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com> Link: https://patch.msgid.link/20251106115926.2317877-1-heikki.krogerus@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-11-09drivers/usb/dwc3: fix PCI parent checkJamie Iles
The sysdev_is_parent check was being used to infer PCI devices that have the DMA mask set from the PCI capabilities, but sysdev_is_parent is also used for non-PCI ACPI devices in which case the DMA mask would be the bus default or as set by the _DMA method. Without this fix the DMA mask would default to 32-bits and so allocation would fail if there was no DRAM below 4GB. Fixes: 47ce45906ca9 ("usb: dwc3: leave default DMA for PCI devices") Cc: stable <stable@kernel.org> Signed-off-by: Jamie Iles <jamie.iles@oss.qualcomm.com> Signed-off-by: Punit Agrawal <punit.agrawal@oss.qualcomm.com> Acked-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com> Link: https://patch.msgid.link/20251107104437.1602509-1-punit.agrawal@oss.qualcomm.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-11-09usb: storage: Fix memory leak in USB bulk transportDesnes Nunes
A kernel memory leak was identified by the 'ioctl_sg01' test from Linux Test Project (LTP). The following bytes were mainly observed: 0x53425355. When USB storage devices incorrectly skip the data phase with status data, the code extracts/validates the CSW from the sg buffer, but fails to clear it afterwards. This leaves status protocol data in srb's transfer buffer, such as the US_BULK_CS_SIGN 'USBS' signature observed here. Thus, this can lead to USB protocols leaks to user space through SCSI generic (/dev/sg*) interfaces, such as the one seen here when the LTP test requested 512 KiB. Fix the leak by zeroing the CSW data in srb's transfer buffer immediately after the validation of devices that skip data phase. Note: Differently from CVE-2018-1000204, which fixed a big leak by zero- ing pages at allocation time, this leak occurs after allocation, when USB protocol data is written to already-allocated sg pages. Fixes: a45b599ad808 ("scsi: sg: allocate with __GFP_ZERO in sg_build_indirect()") Cc: stable <stable@kernel.org> Signed-off-by: Desnes Nunes <desnesn@redhat.com> Reviewed-by: Alan Stern <stern@rowland.harvard.edu> Link: https://patch.msgid.link/20251031043436.55929-1-desnesn@redhat.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-11-09xhci: sideband: Fix race condition in sideband unregisterMathias Nyman
Uttkarsh Aggarwal observed a kernel panic during sideband un-register and found it was caused by a race condition between sideband unregister, and creating sideband interrupters. The issue occurrs when thread T1 runs uaudio_disconnect() and released sb->xhci via sideband_unregister, while thread T2 simultaneously accessed the now-NULL sb->xhci in xhci_sideband_create_interrupter() resulting in a crash. Ensure new endpoints or interrupter can't be added to a sidenband after xhci_sideband_unregister() cleared the existing ones, and unlocked the sideband mutex. Reorganize code so that mutex is only taken and released once in xhci_sideband_unregister(), and clear sb->vdev while mutex is taken. Use mutex guards to reduce human unlock errors in code Refuse to add endpoints or interrupter if sb->vdev is not set. sb->vdev is set when sideband is created and registered. Reported-by: Uttkarsh Aggarwal <uttkarsh.aggarwal@oss.qualcomm.com> Closes: https://lore.kernel.org/linux-usb/20251028080043.27760-1-uttkarsh.aggarwal@oss.qualcomm.com Fixes: de66754e9f80 ("xhci: sideband: add initial api to register a secondary interrupter entity") Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Link: https://patch.msgid.link/20251107162819.1362579-4-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-11-09xhci: dbgtty: Fix data corruption when transmitting data form DbC to hostMathias Nyman
Data read from a DbC device may be corrupted due to a race between ongoing write and write request completion handler both queuing new transfer blocks (TRBs) if there are remining data in the kfifo. TRBs may be in incorrct order compared to the data in the kfifo. Driver fails to keep lock between reading data from kfifo into a dbc request buffer, and queuing the request to the transfer ring. This allows completed request to re-queue itself in the middle of an ongoing transfer loop, forcing itself between a kfifo read and request TRB write of another request cpu0 cpu1 (re-queue completed req2) lock(port_lock) dbc_start_tx() kfifo_out(fifo, req1->buffer) unlock(port_lock) lock(port_lock) dbc_write_complete(req2) dbc_start_tx() kfifo_out(fifo, req2->buffer) unlock(port_lock) lock(port_lock) req2->trb = ring->enqueue; ring->enqueue++ unlock(port_lock) lock(port_lock) req1->trb = ring->enqueue; ring->enqueue++ unlock(port_lock) In the above scenario a kfifo containing "12345678" would read "1234" to req1 and "5678" to req2, but req2 is queued before req1 leading to data being transmitted as "56781234" Solve this by adding a flag that prevents starting a new tx if we are already mid dbc_start_tx() during the unlocked part. The already running dbc_do_start_tx() will make sure the newly completed request gets re-queued as it is added to the request write_pool while holding the lock. Cc: stable@vger.kernel.org Fixes: dfba2174dc42 ("usb: xhci: Add DbC support in xHCI driver") Tested-by: Łukasz Bartosik <ukaszb@chromium.org> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Link: https://patch.msgid.link/20251107162819.1362579-3-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-11-09xhci: fix stale flag preventig URBs after link state error is clearedMathias Nyman
A usb device caught behind a link in ss.Inactive error state needs to be reset to recover. A VDEV_PORT_ERROR flag is used to track this state, preventing new transfers from being queued until error is cleared. This flag may be left uncleared if link goes to error state between two resets, and print the following message: "xhci_hcd 0000:00:14.0: Can't queue urb, port error, link inactive" Fix setting and clearing the flag. The flag is cleared after hub driver has successfully reset the device when hcd->reset_device is called. xhci-hcd issues an internal "reset device" command in this callback, and clear all flags once the command completes successfully. This command may complete with a context state error if slot was recently reset and is already in the defauilt state. This is treated as a success but flag was left uncleared. The link state field is also unreliable if port is currently in reset, so don't set the flag in active reset cases. Also clear the flag immediately when link is no longer in ss.Inactive state and port event handler detects a completed reset. This issue was discovered while debugging kernel bugzilla issue 220491. It is likely one small part of the problem, causing some of the failures, but root cause remains unknown Link: https://bugzilla.kernel.org/show_bug.cgi?id=220491 Fixes: b8c3b718087b ("usb: xhci: Don't try to recover an endpoint if port is in error state.") Cc: stable@vger.kernel.org Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Link: https://patch.msgid.link/20251107162819.1362579-2-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-10-30USB: serial: ftdi_sio: add support for u-blox EVK-M101Oleksandr Suvorov
The U-Blox EVK-M101 enumerates as 1546:0506 [1] with four FTDI interfaces: - EVK-M101 current sensors - EVK-M101 I2C - EVK-M101 UART - EVK-M101 port D Only the third USB interface is a UART. This change lets ftdi_sio probe the VID/PID and registers only interface #3 as a TTY, leaving the rest available for other drivers. [1] usb 5-1.3: new high-speed USB device number 11 using xhci_hcd usb 5-1.3: New USB device found, idVendor=1546, idProduct=0506, bcdDevice= 8.00 usb 5-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 usb 5-1.3: Product: EVK-M101 usb 5-1.3: Manufacturer: u-blox AG Datasheet: https://content.u-blox.com/sites/default/files/documents/EVK-M10_UserGuide_UBX-21003949.pdf Signed-off-by: Oleksandr Suvorov <cryosay@gmail.com> Link: https://lore.kernel.org/20250926060235.3442748-1-cryosay@gmail.com/ Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold <johan@kernel.org>
2025-10-28usb: cdns3: Fix double resource release in cdns3_pci_probeMiaoqian Lin
The driver uses pcim_enable_device() to enable the PCI device, the device will be automatically disabled on driver detach through the managed device framework. The manual pci_disable_device() calls in the error paths are therefore redundant and should be removed. Found via static anlaysis and this is similar to commit 99ca0b57e49f ("thermal: intel: int340x: processor: Fix warning during module unload"). Fixes: 7733f6c32e36 ("usb: cdns3: Add Cadence USB3 DRD Driver") Cc: stable <stable@kernel.org> Signed-off-by: Miaoqian Lin <linmq006@gmail.com> Acked-by: Peter Chen <peter.chen@kernel.org> Link: https://patch.msgid.link/20251026090859.33107-1-linmq006@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-10-28usb: gadget: udc: fix use-after-free in usb_gadget_state_workJimmy Hu
A race condition during gadget teardown can lead to a use-after-free in usb_gadget_state_work(), as reported by KASAN: BUG: KASAN: invalid-access in sysfs_notify+0x2c/0xd0 Workqueue: events usb_gadget_state_work The fundamental race occurs because a concurrent event (e.g., an interrupt) can call usb_gadget_set_state() and schedule gadget->work at any time during the cleanup process in usb_del_gadget(). Commit 399a45e5237c ("usb: gadget: core: flush gadget workqueue after device removal") attempted to fix this by moving flush_work() to after device_del(). However, this does not fully solve the race, as a new work item can still be scheduled *after* flush_work() completes but before the gadget's memory is freed, leading to the same use-after-free. This patch fixes the race condition robustly by introducing a 'teardown' flag and a 'state_lock' spinlock to the usb_gadget struct. The flag is set during cleanup in usb_del_gadget() *before* calling flush_work() to prevent any new work from being scheduled once cleanup has commenced. The scheduling site, usb_gadget_set_state(), now checks this flag under the lock before queueing the work, thus safely closing the race window. Fixes: 5702f75375aa9 ("usb: gadget: udc-core: move sysfs_notify() to a workqueue") Cc: stable <stable@kernel.org> Signed-off-by: Jimmy Hu <hhhuuu@google.com> Link: https://patch.msgid.link/20251023054945.233861-1-hhhuuu@google.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-10-28usb: renesas_usbhs: Fix synchronous external abort on unbindClaudiu Beznea
A synchronous external abort occurs on the Renesas RZ/G3S SoC if unbind is executed after the configuration sequence described above: modprobe usb_f_ecm modprobe libcomposite modprobe configfs cd /sys/kernel/config/usb_gadget mkdir -p g1 cd g1 echo "0x1d6b" > idVendor echo "0x0104" > idProduct mkdir -p strings/0x409 echo "0123456789" > strings/0x409/serialnumber echo "Renesas." > strings/0x409/manufacturer echo "Ethernet Gadget" > strings/0x409/product mkdir -p functions/ecm.usb0 mkdir -p configs/c.1 mkdir -p configs/c.1/strings/0x409 echo "ECM" > configs/c.1/strings/0x409/configuration if [ ! -L configs/c.1/ecm.usb0 ]; then ln -s functions/ecm.usb0 configs/c.1 fi echo 11e20000.usb > UDC echo 11e20000.usb > /sys/bus/platform/drivers/renesas_usbhs/unbind The displayed trace is as follows: Internal error: synchronous external abort: 0000000096000010 [#1] SMP CPU: 0 UID: 0 PID: 188 Comm: sh Tainted: G M 6.17.0-rc7-next-20250922-00010-g41050493b2bd #55 PREEMPT Tainted: [M]=MACHINE_CHECK Hardware name: Renesas SMARC EVK version 2 based on r9a08g045s33 (DT) pstate: 604000c5 (nZCv daIF +PAN -UAO -TCO -DIT -SSBS BTYPE=--) pc : usbhs_sys_function_pullup+0x10/0x40 [renesas_usbhs] lr : usbhsg_update_pullup+0x3c/0x68 [renesas_usbhs] sp : ffff8000838b3920 x29: ffff8000838b3920 x28: ffff00000d585780 x27: 0000000000000000 x26: 0000000000000000 x25: 0000000000000000 x24: ffff00000c3e3810 x23: ffff00000d5e5c80 x22: ffff00000d5e5d40 x21: 0000000000000000 x20: 0000000000000000 x19: ffff00000d5e5c80 x18: 0000000000000020 x17: 2e30303230316531 x16: 312d7968703a7968 x15: 3d454d414e5f4344 x14: 000000000000002c x13: 0000000000000000 x12: 0000000000000000 x11: ffff00000f358f38 x10: ffff00000f358db0 x9 : ffff00000b41f418 x8 : 0101010101010101 x7 : 7f7f7f7f7f7f7f7f x6 : fefefeff6364626d x5 : 8080808000000000 x4 : 000000004b5ccb9d x3 : 0000000000000000 x2 : 0000000000000000 x1 : ffff800083790000 x0 : ffff00000d5e5c80 Call trace: usbhs_sys_function_pullup+0x10/0x40 [renesas_usbhs] (P) usbhsg_pullup+0x4c/0x7c [renesas_usbhs] usb_gadget_disconnect_locked+0x48/0xd4 gadget_unbind_driver+0x44/0x114 device_remove+0x4c/0x80 device_release_driver_internal+0x1c8/0x224 device_release_driver+0x18/0x24 bus_remove_device+0xcc/0x10c device_del+0x14c/0x404 usb_del_gadget+0x88/0xc0 usb_del_gadget_udc+0x18/0x30 usbhs_mod_gadget_remove+0x24/0x44 [renesas_usbhs] usbhs_mod_remove+0x20/0x30 [renesas_usbhs] usbhs_remove+0x98/0xdc [renesas_usbhs] platform_remove+0x20/0x30 device_remove+0x4c/0x80 device_release_driver_internal+0x1c8/0x224 device_driver_detach+0x18/0x24 unbind_store+0xb4/0xb8 drv_attr_store+0x24/0x38 sysfs_kf_write+0x7c/0x94 kernfs_fop_write_iter+0x128/0x1b8 vfs_write+0x2ac/0x350 ksys_write+0x68/0xfc __arm64_sys_write+0x1c/0x28 invoke_syscall+0x48/0x110 el0_svc_common.constprop.0+0xc0/0xe0 do_el0_svc+0x1c/0x28 el0_svc+0x34/0xf0 el0t_64_sync_handler+0xa0/0xe4 el0t_64_sync+0x198/0x19c Code: 7100003f 1a9f07e1 531c6c22 f9400001 (79400021) ---[ end trace 0000000000000000 ]--- note: sh[188] exited with irqs disabled note: sh[188] exited with preempt_count 1 The issue occurs because usbhs_sys_function_pullup(), which accesses the IP registers, is executed after the USBHS clocks have been disabled. The problem is reproducible on the Renesas RZ/G3S SoC starting with the addition of module stop in the clock enable/disable APIs. With module stop functionality enabled, a bus error is expected if a master accesses a module whose clock has been stopped and module stop activated. Disable the IP clocks at the end of remove. Cc: stable <stable@kernel.org> Fixes: f1407d5c6624 ("usb: renesas_usbhs: Add Renesas USBHS common code") Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com> Link: https://patch.msgid.link/20251027140741.557198-1-claudiu.beznea.uj@bp.renesas.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-10-24Merge tag 'usb-serial-6.18-rc3' of ↵Greg Kroah-Hartman
ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial into usb-linus Johan writes: USB serial device ids for 6.18-rc3 Here are some new modem device ids. All have been in linux-next with no reported issues. * tag 'usb-serial-6.18-rc3' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial: USB: serial: option: add Telit FN920C04 ECM compositions USB: serial: option: add Quectel RG255C USB: serial: option: add UNISOC UIS7720
2025-10-23USB: serial: option: add Telit FN920C04 ECM compositionsLI Qingwu
Add support for the Telit Cinterion FN920C04 module when operating in ECM (Ethernet Control Model) mode. The following USB product IDs are used by the module when AT#USBCFG is set to 3 or 7. 0x10A3: ECM + tty (NMEA) + tty (DUN) [+ tty (DIAG)] T: Bus=01 Lev=02 Prnt=02 Port=00 Cnt=01 Dev#= 3 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=1bc7 ProdID=10a3 Rev= 5.15 S: Manufacturer=Telit Cinterion S: Product=FN920 S: SerialNumber=76e7cb38 C:* #Ifs= 5 Cfg#= 1 Atr=e0 MxPwr=500mA I:* If#= 0 Alt= 0 #EPs= 1 Cls=02(comm.) Sub=06 Prot=00 Driver=cdc_ether E: Ad=82(I) Atr=03(Int.) MxPS= 16 Ivl=32ms I: If#= 1 Alt= 0 #EPs= 0 Cls=0a(data ) Sub=00 Prot=00 Driver=cdc_ether I:* If#= 1 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=00 Driver=cdc_ether E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=60 Driver=option E: Ad=84(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option E: Ad=86(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 4 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=87(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms 0x10A8: ECM + tty (DUN) + tty (AUX) [+ tty (DIAG)] T: Bus=03 Lev=02 Prnt=02 Port=00 Cnt=01 Dev#= 3 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=1bc7 ProdID=10a8 Rev= 5.15 S: Manufacturer=Telit Cinterion S: Product=FN920 S: SerialNumber=76e7cb38 C:* #Ifs= 5 Cfg#= 1 Atr=e0 MxPwr=500mA I:* If#= 0 Alt= 0 #EPs= 1 Cls=02(comm.) Sub=06 Prot=00 Driver=cdc_ether E: Ad=82(I) Atr=03(Int.) MxPS= 16 Ivl=32ms I: If#= 1 Alt= 0 #EPs= 0 Cls=0a(data ) Sub=00 Prot=00 Driver=cdc_ether I:* If#= 1 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=00 Driver=cdc_ether E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option E: Ad=84(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option E: Ad=86(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 4 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=87(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms Adding these IDs allows the option driver to automatically create the corresponding /dev/ttyUSB* ports under ECM mode. Tested with FN920C04 under ECM configuration (USBCFG=3 and 7). Signed-off-by: LI Qingwu <Qing-wu.Li@leica-geosystems.com.cn> Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold <johan@kernel.org>
2025-10-22USB: serial: option: add Quectel RG255CReinhard Speyerer
Add support for Quectel RG255C devices to complement commit 5c964c8a97c1 ("net: usb: qmi_wwan: add Quectel RG255C"). The composition is DM / NMEA / AT / QMI. T: Bus=01 Lev=02 Prnt=99 Port=01 Cnt=02 Dev#=110 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=2c7c ProdID=0316 Rev= 5.15 S: Manufacturer=Quectel S: Product=RG255C-GL S: SerialNumber=xxxxxxxx C:* #Ifs= 4 Cfg#= 1 Atr=a0 MxPwr=500mA I:* If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option E: Ad=84(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=50 Driver=qmi_wwan E: Ad=86(I) Atr=03(Int.) MxPS= 8 Ivl=32ms E: Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms Signed-off-by: Reinhard Speyerer <rspmn@arcor.de> Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold <johan@kernel.org>
2025-10-22tcpm: switch check for role_sw device with fw_nodeMichael Grzeschik
When there is no port entry in the tcpci entry itself, the driver will trigger an error message "OF: graph: no port node found in /...../typec" . It is documented that the dts node should contain an connector entry with ports and several port pointing to devices with usb-role-switch property set. Only when those connector entry is missing, it should check for port entries in the main node. We switch the search order for looking after ports, which will avoid the failure message while there are explicit connector entries. Fixes: d56de8c9a17d ("usb: typec: tcpm: try to get role switch from tcpc fwnode") Cc: stable <stable@kernel.org> Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de> Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Reviewed-by: Badhri Jagan Sridharan <badhri@google.com> Link: https://patch.msgid.link/20251013-b4-ml-topic-tcpm-v2-1-63c9b2ab8a0b@pengutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-10-22usb/core/quirks: Add Huawei ME906S to wakeup quirkTim Guttzeit
The list of Huawei LTE modules needing the quirk fixing spurious wakeups was missing the IDs of the Huawei ME906S module, therefore suspend did not work. Cc: stable <stable@kernel.org> Signed-off-by: Tim Guttzeit <t.guttzeit@tuxedocomputers.com> Signed-off-by: Werner Sembach <wse@tuxedocomputers.com> Link: https://patch.msgid.link/20251020134304.35079-1-wse@tuxedocomputers.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-10-22usb: raw-gadget: do not limit transfer lengthAndrey Konovalov
Drop the check on the maximum transfer length in Raw Gadget for both control and non-control transfers. Limiting the transfer length causes a problem with emulating USB devices whose full configuration descriptor exceeds PAGE_SIZE in length. Overall, there does not appear to be any reason to enforce any kind of transfer length limit on the Raw Gadget side for either control or non-control transfers, so let's just drop the related check. Cc: stable <stable@kernel.org> Fixes: f2c2e717642c ("usb: gadget: add raw-gadget interface") Signed-off-by: Andrey Konovalov <andreyknvl@gmail.com> Link: https://patch.msgid.link/a6024e8eab679043e9b8a5defdb41c4bda62f02b.1761085528.git.andreyknvl@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-10-20USB: serial: option: add UNISOC UIS7720Renjun Wang
Add support for UNISOC (Spreadtrum) UIS7720 (A7720) module. T: Bus=05 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 5 Spd=480 MxCh= 0 D: Ver= 2.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=1782 ProdID=4064 Rev=04.04 S: Manufacturer=Unisoc-phone S: Product=Unisoc-phone S: SerialNumber=0123456789ABCDEF C: #Ifs= 9 Cfg#= 1 Atr=c0 MxPwr=500mA I: If#= 0 Alt= 0 #EPs= 1 Cls=e0(wlcon) Sub=01 Prot=03 Driver=rndis_host E: Ad=82(I) Atr=03(Int.) MxPS= 8 Ivl=32ms I: If#= 1 Alt= 0 #EPs= 2 Cls=0a(data ) Sub=00 Prot=00 Driver=rndis_host E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I: If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I: If#= 3 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I: If#= 4 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I: If#= 5 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I: If#= 6 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=06(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=87(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I: If#= 7 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=07(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=88(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I: If#= 8 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=42 Prot=01 Driver=(none) E: Ad=08(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=89(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms 0&1: RNDIS, 2: LOG, 3: DIAG, 4&5: AT Ports, 6&7: AT2 Ports, 8: ADB Signed-off-by: Renjun Wang <renjunw0@foxmail.com> Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold <johan@kernel.org>
2025-10-14xhci: dbc: enable back DbC in resume if it was enabled before suspendMathias Nyman
DbC is currently only enabled back if it's in configured state during suspend. If system is suspended after DbC is enabled, but before the device is properly enumerated by the host, then DbC would not be enabled back in resume. Always enable DbC back in resume if it's suspended in enabled, connected, or configured state Cc: stable <stable@kernel.org> Fixes: dfba2174dc42 ("usb: xhci: Add DbC support in xHCI driver") Tested-by: Łukasz Bartosik <ukaszb@chromium.org> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-10-14xhci: dbc: fix bogus 1024 byte prefix if ttyDBC read races with stall eventMathias Nyman
DbC may add 1024 bogus bytes to the beginneing of the receiving endpoint if DbC hw triggers a STALL event before any Transfer Blocks (TRBs) for incoming data are queued, but driver handles the event after it queued the TRBs. This is possible as xHCI DbC hardware may trigger spurious STALL transfer events even if endpoint is empty. The STALL event contains a pointer to the stalled TRB, and "remaining" untransferred data length. As there are no TRBs queued yet the STALL event will just point to first TRB position of the empty ring, with '0' bytes remaining untransferred. DbC driver is polling for events, and may not handle the STALL event before /dev/ttyDBC0 is opened and incoming data TRBs are queued. The DbC event handler will now assume the first queued TRB (length 1024) has stalled with '0' bytes remaining untransferred, and copies the data This race situation can be practically mitigated by making sure the event handler handles all pending transfer events when DbC reaches configured state, and only then create dev/ttyDbC0, and start queueing transfers. The event handler can this way detect the STALL events on empty rings and discard them before any transfers are queued. This does in practice solve the issue, but still leaves a small possible gap for the race to trigger. We still need a way to distinguish spurious STALLs on empty rings with '0' bytes remaing, from actual STALL events with all bytes transmitted. Cc: stable <stable@kernel.org> Fixes: dfba2174dc42 ("usb: xhci: Add DbC support in xHCI driver") Tested-by: Łukasz Bartosik <ukaszb@chromium.org> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-10-14usb: xhci-pci: Fix USB2-only root hub registrationMichal Pecio
A recent change to hide USB3 root hubs of USB2-only controllers broke registration of USB2 root hubs - allow_single_roothub is set too late, and by this time xhci_run() has already deferred root hub registration until after the shared HCD is added, which will never happen. This makes such controllers unusable, but testers didn't notice since they were only bothered by warnings about empty USB3 root hubs. The bug causes problems to other people who actually use such HCs and I was able to confirm it on an ordinary HC by patching to ignore USB3 ports. Setting allow_single_roothub during early setup fixes things. Reported-by: Arisa Snowbell <arisa.snowbell@gmail.com> Closes: https://lore.kernel.org/linux-usb/CABpa4MA9unucCoKtSdzJyOLjHNVy+Cwgz5AnAxPkKw6vuox1Nw@mail.gmail.com/ Reported-by: Michal Kubecek <mkubecek@suse.cz> Closes: https://lore.kernel.org/linux-usb/lnb5bum7dnzkn3fc7gq6hwigslebo7o4ccflcvsc3lvdgnu7el@fvqpobbdoapl/ Fixes: 719de070f764 ("usb: xhci-pci: add support for hosts with zero USB3 ports") Tested-by: Arisa Snowbell <arisa.snowbell@gmail.com> Tested-by: Michal Kubecek <mkubecek@suse.cz> Suggested-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Michal Pecio <michal.pecio@gmail.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-10-13usb: misc: Add x86 dependency for Intel USBIO driverPeter Robinson
The Intel USBIO driver is x86 only, other architectures have ACPI so add an appropriate depenecy plus compile test. Fixes: 121a0f839dbb3 ("usb: misc: Add Intel USBIO bridge driver") Signed-off-by: Peter Robinson <pbrobinson@gmail.com> Reviewed-by: Hans de Goede <hansg@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-10-13usb: dwc3: Don't call clk_bulk_disable_unprepare() twiceChristophe JAILLET
devm_clk_bulk_get_all_enabled() is used in the probe, so clk_bulk_disable_unprepare() should not be called explicitly in the remove function. Fixes: e0b6dc00c701 ("usb: dwc3: add generic driver to support flattened") Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Acked-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-10-04Merge tag 'usb-6.18-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb Pull USB / Thunderbolt updates from Greg KH: "Here is the big set of USB and thunderbolt drivers for 6.18-rc1. It was another normal development cycle, with lots of the usual drivers getting updates: - Thunderbolt driver cleanups and additions - dwc3 driver updates - dwc2 driver updates - typec driver updates - xhci driver updates and additions - offload USB engine updates for better power management - unused tracepoint removals - usb gadget fixes and updates as more users start to rely on these drivers instead of the "old" function gadget drivers - new USB device ids - other minor driver USB driver updates - new USB I/O driver framework and driver additions" The last item, the usb i/o driver, has an i2c and gpio driver added through this tree. Those drivers were acked by the respective subsystem maintainers. All of these have been in linux-next for a while" * tag 'usb-6.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (132 commits) usb: vhci-hcd: Prevent suspending virtually attached devices USB: serial: option: add SIMCom 8230C compositions thunderbolt: Fix use-after-free in tb_dp_dprx_work usb: xhci: align PORTSC trace with one-based port numbering usb: xhci: correct indentation for PORTSC tracing function usb: xhci: improve TR Dequeue Pointer mask usb: xhci-pci: add support for hosts with zero USB3 ports usb: xhci: Update a comment about Stop Endpoint retries Revert "usb: xhci: Avoid Stop Endpoint retry loop if the endpoint seems Running" usb: gadget: f_rndis: Refactor bind path to use __free() usb: gadget: f_ecm: Refactor bind path to use __free() usb: gadget: f_acm: Refactor bind path to use __free() usb: gadget: f_ncm: Refactor bind path to use __free() usb: gadget: Introduce free_usb_request helper usb: gadget: Store endpoint pointer in usb_request usb: host: xhci-rcar: Add Renesas RZ/G3E USB3 Host driver support usb: host: xhci-plat: Add .post_resume_quirk for struct xhci_plat_priv usb: host: xhci-rcar: Move R-Car reg definitions dt-bindings: usb: Document Renesas RZ/G3E USB3HOST usb: gadget: f_fs: Fix epfile null pointer access after ep enable. ...
generated by cgit v1.2.3 (git 2.46.0) at 2025-12-10 09:48:24 +0000