| Age | Commit message (Collapse) | Author |
|---|
|
Reorganize the Curve25519 library code:
- Build a single libcurve25519 module, instead of up to three modules:
libcurve25519, libcurve25519-generic, and an arch-specific module.
- Move the arch-specific Curve25519 code from arch/$(SRCARCH)/crypto/ to
lib/crypto/$(SRCARCH)/. Centralize the build rules into
lib/crypto/Makefile and lib/crypto/Kconfig.
- Include the arch-specific code directly in lib/crypto/curve25519.c via
a header, rather than using a separate .c file.
- Eliminate the entanglement with CRYPTO. CRYPTO_LIB_CURVE25519 no
longer selects CRYPTO, and the arch-specific Curve25519 code no longer
depends on CRYPTO.
This brings Curve25519 in line with the latest conventions for
lib/crypto/, used by other algorithms. The exception is that I kept the
generic code in separate translation units for now. (Some of the
function names collide between the x86 and generic Curve25519 code. And
the Curve25519 functions are very long anyway, so inlining doesn't
matter as much for Curve25519 as it does for some other algorithms.)
Link: https://lore.kernel.org/r/20250906213523.84915-11-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
|
|
Consolidate the ChaCha code into a single module (excluding
chacha-block-generic.c which remains always built-in for random.c),
similar to various other algorithms:
- Each arch now provides a header file lib/crypto/$(SRCARCH)/chacha.h,
replacing lib/crypto/$(SRCARCH)/chacha*.c. The header defines
chacha_crypt_arch() and hchacha_block_arch(). It is included by
lib/crypto/chacha.c, and thus the code gets built into the single
libchacha module, with improved inlining in some cases.
- Whether arch-optimized ChaCha is buildable is now controlled centrally
by lib/crypto/Kconfig instead of by lib/crypto/$(SRCARCH)/Kconfig.
The conditions for enabling it remain the same as before, and it
remains enabled by default.
- Any additional arch-specific translation units for the optimized
ChaCha code, such as assembly files, are now compiled by
lib/crypto/Makefile instead of lib/crypto/$(SRCARCH)/Makefile.
This removes the last use for the Makefile and Kconfig files in the
arm64, mips, powerpc, riscv, and s390 subdirectories of lib/crypto/. So
also remove those files and the references to them.
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://lore.kernel.org/r/20250827151131.27733-7-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
|
|
chacha_is_arch_optimized() is no longer used, so remove it.
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://lore.kernel.org/r/20250827151131.27733-4-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
|
|
Consolidate the Poly1305 code into a single module, similar to various
other algorithms (SHA-1, SHA-256, SHA-512, etc.):
- Each arch now provides a header file lib/crypto/$(SRCARCH)/poly1305.h,
replacing lib/crypto/$(SRCARCH)/poly1305*.c. The header defines
poly1305_block_init(), poly1305_blocks(), poly1305_emit(), and
optionally poly1305_mod_init_arch(). It is included by
lib/crypto/poly1305.c, and thus the code gets built into the single
libpoly1305 module, with improved inlining in some cases.
- Whether arch-optimized Poly1305 is buildable is now controlled
centrally by lib/crypto/Kconfig instead of by
lib/crypto/$(SRCARCH)/Kconfig. The conditions for enabling it remain
the same as before, and it remains enabled by default. (The PPC64 one
remains unconditionally disabled due to 'depends on BROKEN'.)
- Any additional arch-specific translation units for the optimized
Poly1305 code, such as assembly files, are now compiled by
lib/crypto/Makefile instead of lib/crypto/$(SRCARCH)/Makefile.
A special consideration is needed because the Adiantum code uses the
poly1305_core_*() functions directly. For now, just carry forward that
approach. This means retaining the CRYPTO_LIB_POLY1305_GENERIC kconfig
symbol, and keeping the poly1305_core_*() functions in separate
translation units. So it's not quite as streamlined I've done with the
other hash functions, but we still get a single libpoly1305 module.
Note: to see the diff from the arm, arm64, and x86 .c files to the new
.h files, view this commit with 'git show -M10'.
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://lore.kernel.org/r/20250829152513.92459-3-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
|
|
poly1305_is_arch_optimized() is unused, so remove it.
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://lore.kernel.org/r/20250829152513.92459-2-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
|
|
Instead of exposing the powerpc-optimized MD5 code via powerpc-specific
crypto_shash algorithms, instead just implement the md5_blocks() library
function. This is much simpler, it makes the MD5 library functions be
powerpc-optimized, and it fixes the longstanding issue where the
powerpc-optimized MD5 code was disabled by default. MD5 still remains
available through crypto_shash, but individual architectures no longer
need to handle it.
Link: https://lore.kernel.org/r/20250805222855.10362-5-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
|
|
Instead of exposing the powerpc-optimized SHA-1 code via
powerpc-specific crypto_shash algorithms, instead just implement the
sha1_blocks() library function. This is much simpler, it makes the
SHA-1 library functions be powerpc-optimized, and it fixes the
longstanding issue where the powerpc-optimized SHA-1 code was disabled
by default. SHA-1 still remains available through crypto_shash, but
individual architectures no longer need to handle it.
Note: to see the diff from arch/powerpc/crypto/sha1-spe-glue.c to
lib/crypto/powerpc/sha1.h, view this commit with 'git show -M10'.
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://lore.kernel.org/r/20250712232329.818226-11-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
|
|
Consolidate the CPU-based SHA-256 code into a single module, following
what I did with SHA-512:
- Each arch now provides a header file lib/crypto/$(SRCARCH)/sha256.h,
replacing lib/crypto/$(SRCARCH)/sha256.c. The header defines
sha256_blocks() and optionally sha256_mod_init_arch(). It is included
by lib/crypto/sha256.c, and thus the code gets built into the single
libsha256 module, with proper inlining and dead code elimination.
- sha256_blocks_generic() is moved from lib/crypto/sha256-generic.c into
lib/crypto/sha256.c. It's now a static function marked with
__maybe_unused, so the compiler automatically eliminates it in any
cases where it's not used.
- Whether arch-optimized SHA-256 is buildable is now controlled
centrally by lib/crypto/Kconfig instead of by
lib/crypto/$(SRCARCH)/Kconfig. The conditions for enabling it remain
the same as before, and it remains enabled by default.
- Any additional arch-specific translation units for the optimized
SHA-256 code (such as assembly files) are now compiled by
lib/crypto/Makefile instead of lib/crypto/$(SRCARCH)/Makefile.
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://lore.kernel.org/r/20250630160645.3198-13-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
|
|
Remove sha256_is_arch_optimized(), since it is no longer used.
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://lore.kernel.org/r/20250630160645.3198-12-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
|
|
The previous commit made the SHA-256 compression function state be
strongly typed, but it wasn't propagated all the way down to the
implementations of it. Do that now.
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://lore.kernel.org/r/20250630160645.3198-8-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
|
|
Move the contents of arch/powerpc/lib/crypto/ into lib/crypto/powerpc/.
The new code organization makes a lot more sense for how this code
actually works and is developed. In particular, it makes it possible to
build each algorithm as a single module, with better inlining and dead
code elimination. For a more detailed explanation, see the patchset
which did this for the CRC library code:
https://lore.kernel.org/r/20250607200454.73587-1-ebiggers@kernel.org/.
Also see the patchset which did this for SHA-512:
https://lore.kernel.org/linux-crypto/20250616014019.415791-1-ebiggers@kernel.org/
This is just a preparatory commit, which does the move to get the files
into their new location but keeps them building the same way as before.
Later commits will make the actual improvements to the way the
arch-optimized code is integrated for each algorithm.
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Reviewed-by: Sohil Mehta <sohil.mehta@intel.com>
Link: https://lore.kernel.org/r/20250619191908.134235-5-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
|
