summaryrefslogtreecommitdiff
path: root/net/mac80211/util.c
AgeCommit message (Collapse)Author
2025-11-11wifi: mac80211: track MU-MIMO configuration on disabled interfacesBenjamin Berg
For monitoring, userspace will try to configure the VIF sdata, while the driver may see the monitor_sdata that is created when only monitor interfaces are up. This causes the odd situation that it may not be possible to store the MU-MIMO configuration on monitor_sdata. Fix this by storing that information on the VIF sdata and updating the monitor_sdata when available and the interface is up. Also, adjust the code that adds monitor_sdata so that it will configure MU-MIMO based on the newly added interface or one of the existing ones. This should give a mostly consistent behaviour when configuring MU-MIMO on sniffer interfaces. Should the user configure MU-MIMO on multiple sniffer interfaces, then mac80211 will simply select one of the configurations. This behaviour should be good enough and avoids breaking user expectations in the common scenarios. Signed-off-by: Benjamin Berg <benjamin.berg@intel.com> Reviewed-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://patch.msgid.link/20251110141514.677915f8f6bb.If4e04a57052f9ca763562a67248b06fd80d0c2c1@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2025-11-10wifi: mac80211: simplify ieee80211_recalc_chanctx_min_def() APIJohannes Berg
ieee80211_recalc_chanctx_min_def() is used outside the chandef code, but then should/is always used with NULL/false for the two last arguments. Remove them, and create another level of indirection for use inside the file. Link: https://patch.msgid.link/20251105160431.33408844c392.I4f52298861780c17a27cd229609e8a3e29c8d740@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2025-11-10wifi: mac80211: remove chanctx to link back-referencesJohannes Berg
Each link can currently use a chanctx and have another one reserved, and both of these are also tracked backwards in the assigned_links and reserved_links lists. If we consider that there aren't *that* many links, this duplicate book- keeping isn't necessary. (I think it used to be necessary before the wiphy locking changes, when chanctx_mtx existed, because we couldn't do any interface iterations while holding only chanctx_mtx.) Additionally, for NAN, we're going to want to track which chanctxs are in use by the (group of) NAN interfaces. For those, links don't really make sense as such, so chanctxs need to be assigned to a different data structure. Thus, as a first step, remove those back-lists of users (right now only links) of each channel context. This is a very basic conversion, ieee80211_vif_use_reserved_switch() should made to iterate smarter. Link: https://patch.msgid.link/20251105160431.dbeea1c42e76.I8d273c407274e1c05a4778aa20b56a9f326e87a7@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2025-09-19wifi: mac80211: correctly initialise S1G chandef for STALachlan Hodges
When moving to the APs channel, ensure we correctly initialise the chandef and perform the required validation. Additionally, if the AP is beaconing on a 2MHz primary, calculate the 2MHz primary center frequency by extracting the sibling 1MHz primary and averaging the frequencies to find the 2MHz primary center frequency. Signed-off-by: Lachlan Hodges <lachlan.hodges@morsemicro.com> Link: https://patch.msgid.link/20250918051913.500781-3-lachlan.hodges@morsemicro.com Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2025-09-19wifi: mac80211: Export an API to check if NAN is startedIlan Peer
So it can be used by drivers to check if NAN Device interface is started or not. Signed-off-by: Ilan Peer <ilan.peer@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://patch.msgid.link/20250908140015.c69652f77eb6.Ie4f3d197e0706e742e3d97614fadc11b22adfbc6@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2025-09-04wifi: mac80211: reduce the scope of rts_thresholdMiri Korenblit
This is only needed within the 'if' scope, not in the function scope. Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://patch.msgid.link/20250903083904.1972284-3-miriam.rachel.korenblit@intel.com Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2025-09-04wifi: mac80211: simplify return value handling of ↵Aditya Kumar Singh
cfg80211_get_radio_idx_by_chan() In several instances where cfg80211_get_radio_idx_by_chan() is called, redundant checks are performed across function — such as verifying if wiphy->n_radio < 2 or if the returned index is negative. These checks are unnecessary, as the return value can be directly compared. Moreover, the function can be safely called even when radio-level properties are not explicitly advertised since in such case in each call it is going to get same error value. Therefore, simplify the usage of this function across all such cases by removing redundant conditions and relying on the return value directly. Signed-off-by: Aditya Kumar Singh <aditya.kumar.singh@oss.qualcomm.com> Link: https://patch.msgid.link/20250812-fix_scan_ap_flag_requirement_during_mlo-v4-2-383ffb6da213@oss.qualcomm.com Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2025-07-18wifi: mac80211: support initialising current S1G short beacon indexLachlan Hodges
Introduce the sb_count variable which tracks the number of beacon intervals until the next long beacon. To initialise this value, we find the current short beacon index into this period which represents the number of short beacons left to send before the next long beacon. We use the same TSF value used to initialise the DTIM count to ensure the short beacon count and DTIM count are in sync as its common for the long beacon period and DTIM period to be equivalent. Signed-off-by: Lachlan Hodges <lachlan.hodges@morsemicro.com> Link: https://patch.msgid.link/20250717074205.312577-4-lachlan.hodges@morsemicro.com Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2025-07-11Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski
Cross-merge networking fixes after downstream PR (net-6.16-rc6-2). No conflicts. Adjacent changes: drivers/net/wireless/mediatek/mt76/mt7925/mcu.c c701574c5412 ("wifi: mt76: mt7925: fix invalid array index in ssid assignment during hw scan") b3a431fe2e39 ("wifi: mt76: mt7925: fix off by one in mt7925_mcu_hw_scan()") drivers/net/wireless/mediatek/mt76/mt7996/mac.c 62da647a2b20 ("wifi: mt76: mt7996: Add MLO support to mt7996_tx_check_aggr()") dc66a129adf1 ("wifi: mt76: add a wrapper for wcid access with validation") drivers/net/wireless/mediatek/mt76/mt7996/main.c 3dd6f67c669c ("wifi: mt76: Move RCU section in mt7996_mcu_add_rate_ctrl()") 8989d8e90f5f ("wifi: mt76: mt7996: Do not set wcid.sta to 1 in mt7996_mac_sta_event()") net/mac80211/cfg.c 58fcb1b4287c ("wifi: mac80211: reject VHT opmode for unsupported channel widths") 037dc18ac3fb ("wifi: mac80211: add support for storing station S1G capabilities") Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-07-10wifi: mac80211: add the virtual monitor after reconfig completeMiri Korenblit
In reconfig we add the virtual monitor in 2 cases: 1. If we are resuming (it was deleted on suspend) 2. If it was added after an error but before the reconfig (due to the last non-monitor interface removal). In the second case, the removal of the non-monitor interface will succeed but the addition of the virtual monitor will fail, so we add it in the reconfig. The problem is that we mislead the driver to think that this is an existing interface that is getting re-added - while it is actually a completely new interface from the drivers' point of view. Some drivers act differently when a interface is re-added. For example, it might not initialize things because they were already initialized. Such drivers will - in this case - be left with a partialy initialized vif. To fix it, add the virtual monitor after reconfig_complete, so the driver will know that this is a completely new interface. Fixes: 3c3e21e7443b ("mac80211: destroy virtual monitor interface across suspend") Reviewed-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://patch.msgid.link/20250709233451.648d39b041e8.I2e37b68375278987e303d6c00cc5f3d8334d2f96@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2025-07-09wifi: cfg80211/mac80211: implement dot11ExtendedRegInfoSupportSomashekhar Puttagangaiah
Implement dot11ExtendedRegInfoSupport to advertise non-AP station regulatory power capability as part of regulatory connectivity element in (Re)Association request frames so that AP can achieve maximum client connectivity. Control field which was interpreted using value of 3-bits B5 to B3, now uses value of 4-bits B6 to B3 to interpret the type of AP. Hence update IEEE80211_HE_6GHZ_OPER_CTRL_REG_INFO to parse 4-bits control field. If older AP still updates only 3-bits value of control field, station can still interpret the value as per section E.2.7 of IEEE 802.11 REVme D7.0 and support the appropriate AP type. Also update IEEE80211_6GHZ_CTRL_REG_INDOOR_SP_AP as the value of standard power AP is changed to 8 instead of 4 so that AP can support both LPI AP and SP AP to maximize the connectivity with stations. For backward compatibility, keeping value 4 as old AP by limiting it to SP AP only. Signed-off-by: Somashekhar Puttagangaiah <somashekhar.puttagangaiah@intel.com> Reviewed-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://patch.msgid.link/20250609213232.90cdef116aad.I85da390fbee59355e3855691933e6a5e55c47ac4@changeid [fix kernel-doc] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2025-06-26Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski
Cross-merge networking fixes after downstream PR (net-6.16-rc4). Conflicts: Documentation/netlink/specs/mptcp_pm.yaml 9e6dd4c256d0 ("netlink: specs: mptcp: replace underscores with dashes in names") ec362192aa9e ("netlink: specs: fix up indentation errors") https://lore.kernel.org/20250626122205.389c2cd4@canb.auug.org.au Adjacent changes: Documentation/netlink/specs/fou.yaml 791a9ed0a40d ("netlink: specs: fou: replace underscores with dashes in names") 880d43ca9aa4 ("netlink: specs: clean up spaces in brackets") Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-06-24wifi: mac80211: Set RTS threshold on per-radio basisRoopni Devanathan
Add support to get the radio for which RTS threshold needs to be changed from userspace. Pass on this radio index to underlying drivers as an additional argument. A value of -1 indicates radio index is not mentioned and that the configuration applies to all radio(s) of the wiphy. Signed-off-by: Roopni Devanathan <quic_rdevanat@quicinc.com> Link: https://patch.msgid.link/20250615082312.619639-5-quic_rdevanat@quicinc.com Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2025-06-24wifi: cfg80211/mac80211: Add support to get radio indexRoopni Devanathan
Currently, per-radio attributes are set on per-phy basis, i.e., all the radios present in a wiphy will take attributes values sent from user. But each radio in a wiphy can get different values from userspace based on its requirement. To extend support to set per-radio attributes, add support to get radio index from userspace. Add an NL attribute - NL80211_ATTR_WIPHY_RADIO_INDEX, to get user specified radio index for which attributes should be changed. Pass this to individual drivers, so that the drivers can use this radio index to change per-radio attributes when necessary. Currently, per-radio attributes identified are: NL80211_ATTR_WIPHY_TX_POWER_LEVEL NL80211_ATTR_WIPHY_ANTENNA_TX NL80211_ATTR_WIPHY_ANTENNA_RX NL80211_ATTR_WIPHY_RETRY_SHORT NL80211_ATTR_WIPHY_RETRY_LONG NL80211_ATTR_WIPHY_FRAG_THRESHOLD NL80211_ATTR_WIPHY_RTS_THRESHOLD NL80211_ATTR_WIPHY_COVERAGE_CLASS NL80211_ATTR_TXQ_LIMIT NL80211_ATTR_TXQ_MEMORY_LIMIT NL80211_ATTR_TXQ_QUANTUM By default, the radio index is set to -1. This means the attribute should be treated as a global configuration. If the user has not specified any index, then the radio index passed to individual drivers would be -1. This would indicate that the attribute applies to all radios in that wiphy. Signed-off-by: Roopni Devanathan <quic_rdevanat@quicinc.com> Link: https://patch.msgid.link/20250615082312.619639-2-quic_rdevanat@quicinc.com Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2025-06-24wifi: mac80211: add support towards MLO handling of station statisticsSarika Sharma
Currently, in supporting API's to fill sinfo structure from sta structure, is mapped to fill the fields from sta->deflink. However, for multi-link (ML) station, sinfo structure should be filled from corresponding link_id. Therefore, add link_id as an additional argument in supporting API's for filling sinfo structure correctly. Link_id is set to -1 for non-ML station and corresponding link_id for ML stations. In supporting API's for filling sinfo structure, check for link_id, if link_id < 0, fill the sinfo structure from sta->deflink, otherwise fill from sta->link[link_id]. Current, changes are done at the deflink level i.e, pass -1 as link_id. Actual link_id will be added in subsequent patches to support station statistics for MLO. Signed-off-by: Sarika Sharma <quic_sarishar@quicinc.com> Link: https://patch.msgid.link/20250528054420.3050133-2-quic_sarishar@quicinc.com Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2025-06-24wifi: mac80211: fix beacon interval calculation overflowLachlan Hodges
As we are converting from TU to usecs, a beacon interval of 100*1024 usecs will lead to integer wrapping. To fix change to use a u32. Fixes: 057d5f4ba1e4 ("mac80211: sync dtim_count to TSF") Signed-off-by: Lachlan Hodges <lachlan.hodges@morsemicro.com> Link: https://patch.msgid.link/20250621123209.511796-1-lachlan.hodges@morsemicro.com Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2025-06-20wifi: mac80211: Allow DFS/CSA on a radio if scan is ongoing on another radioAditya Kumar Singh
Currently, in multi-radio wiphy cases, if a scan is ongoing on one radio, -EBUSY is returned when DFS or a channel switch is initiated on another radio. Because of this, an MLD AP with one radio (link) in an ongoing scan cannot initiate DFS or a channel switch on another radio (link). In multi-radio wiphy cases, multiple radios are grouped under a single wiphy. Hence, if a scan is ongoing on one underlying radio and DFS or a channel switch is requested on a different underlying radio of the same wiphy, these operations can be allowed simultaneously. Add logic to check the underlying radio used for the ongoing scan. If the radio on which DFS or a channel switch is requested is not being used for the scan, allow the operation; otherwise, return -EBUSY. Signed-off-by: Aditya Kumar Singh <aditya.kumar.singh@oss.qualcomm.com> Co-developed-by: Raj Kumar Bhagat <quic_rajkbhag@quicinc.com> Signed-off-by: Raj Kumar Bhagat <quic_rajkbhag@quicinc.com> Link: https://patch.msgid.link/20250527-mlo-dfs-acs-v2-2-92c2f37c81d9@quicinc.com Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2025-04-23wifi: cfg80211/mac80211: remove more 5/10 MHz codeJohannes Berg
We still have ieee80211_chandef_rate_flags() and all that, but all the users seem pretty much broken (deflink, etc.) Remove all the code. It's been two years since last anyone even vaguely entertained the notion of looking at this and fixing it. Link: https://patch.msgid.link/20250329221419.c31da7ae8c84.I1a3a4b6008134d66ca75a5bdfc004f4594da8145@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2025-03-13Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netPaolo Abeni
Cross-merge networking fixes after downstream PR (net-6.14-rc6). Conflicts: tools/testing/selftests/drivers/net/ping.py 75cc19c8ff89 ("selftests: drv-net: add xdp cases for ping.py") de94e8697405 ("selftests: drv-net: store addresses in dict indexed by ipver") https://lore.kernel.org/netdev/20250311115758.17a1d414@canb.auug.org.au/ net/core/devmem.c a70f891e0fa0 ("net: devmem: do not WARN conditionally after netdev_rx_queue_restart()") 1d22d3060b9b ("net: drop rtnl_lock for queue_mgmt operations") https://lore.kernel.org/netdev/20250313114929.43744df1@canb.auug.org.au/ Adjacent changes: tools/testing/selftests/net/Makefile 6f50175ccad4 ("selftests: Add IPv6 link-local address generation tests for GRE devices.") 2e5584e0f913 ("selftests/net: expand cmsg_ipv6.sh with ipv4") drivers/net/ethernet/broadcom/bnxt/bnxt.c 661958552eda ("eth: bnxt: do not use BNXT_VNIC_NTUPLE unconditionally in queue restart logic") fe96d717d38e ("bnxt_en: Extend queue stop/start for TX rings") Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-03-07wifi: mac80211: don't queue sdata::work for a non-running sdataMiri Korenblit
The worker really shouldn't be queued for a non-running interface. Also, if ieee80211_setup_sdata is called between queueing and executing the wk, it will be initialized, which will corrupt wiphy_work_list. Fixes: f8891461a277 ("mac80211: do not start any work during reconfigure flow") Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Reviewed-by: Johannes Berg <johannes.berg@intel.com> Link: https://patch.msgid.link/20250306123626.1e02caf82640.I4949e71ed56e7186ed4968fa9ddff477473fa2f4@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2025-03-06Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski
Cross-merge networking fixes after downstream PR (net-6.14-rc6). Conflicts: net/ethtool/cabletest.c 2bcf4772e45a ("net: ethtool: try to protect all callback with netdev instance lock") 637399bf7e77 ("net: ethtool: netlink: Allow NULL nlattrs when getting a phy_device") No Adjacent changes. Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-02-26wifi: mac80211: Add counter for all monitor interfacesAlexander Wetzel
Count open monitor interfaces regardless of the monitor interface type. The new counter virt_monitors takes over counting interfaces depending on the virtual monitor interface while monitors is used for all active monitor interfaces. This fixes monitor packet mirroring when using MONITOR_FLAG_ACTIVE or NO_VIRTUAL_MONITOR interfaces. Fixes: 286e69677065 ("wifi: mac80211: Drop cooked monitor support") Reported-by: Karthikeyan Periyasamy <quic_periyasa@quicinc.com> Closes: https://lore.kernel.org/r/cc715114-4e3b-619a-49dc-a4878075e1dc@quicinc.com Signed-off-by: Alexander Wetzel <Alexander@wetzel-home.de> Tested-by: Karthikeyan Periyasamy <quic_periyasa@quicinc.com> Link: https://patch.msgid.link/20250220094139.61459-1-Alexander@wetzel-home.de Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2025-02-11wifi: mac80211: Cleanup sta TXQs on flushAlexander Wetzel
Drop the sta TXQs on flush when the drivers is not supporting flush. ieee80211_set_disassoc() tries to clean up everything for the sta. But it ignored queued frames in the sta TX queues when the driver isn't supporting the flush driver ops. Signed-off-by: Alexander Wetzel <Alexander@wetzel-home.de> Link: https://patch.msgid.link/20250204123129.9162-1-Alexander@wetzel-home.de Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2025-01-13wifi: mac80211: improve stop/wake queue tracingEmmanuel Grumbach
Add the refcount. This can be useful when we want to understand why a queue stays stopped after it is woken. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Reviewed-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://patch.msgid.link/20250101070249.bd320c6e6702.I6ae0f19d922aea1f28236d72bf260acac428fc02@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2025-01-13wifi: mac80211: Remove unused ieee80211_smps_is_restrictiveDr. David Alan Gilbert
The last use of ieee80211_smps_is_restrictive() was removed in 2020 by commit 52b4810bed83 ("mac80211: Remove support for changing AP SMPS mode") Remove it. Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org> Link: https://patch.msgid.link/20241226170119.108947-1-linux@treblig.org Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-12-19Merge tag 'wireless-next-2024-12-19' of ↵Jakub Kicinski
git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next Kalle Valo says: ==================== wireless-next patches for v6.14 Multi-Link Operation implementation continues, both in stack and in drivers. Otherwise it has been relatively quiet. Major changes: cfg80211/mac80211 - define wiphy guard - get TX power per link - EHT 320 MHz channel support for mesh ath11k - QCA6698AQ support ath9k - RX inactivity detection rtl8xxxu - add more USB device IDs rtw88 - add more USB device IDs - enable USB RX aggregation and USB 3 to improve performance rtw89 - PowerSave flow for Multi-Link Operation * tag 'wireless-next-2024-12-19' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next: (121 commits) wifi: wlcore: sysfs: constify 'struct bin_attribute' wifi: brcmfmac: clarify unmodifiable headroom log message wifi: brcmfmac: add missing header include for brcmf_dbg wifi: brcmsmac: add gain range check to wlc_phy_iqcal_gainparams_nphy() wifi: qtnfmac: fix spelling error in core.h wifi: rtw89: phy: add dummy C2H event handler for report of TAS power wifi: rtw89: 8851b: rfk: remove unnecessary assignment of return value of _dpk_dgain_read() wifi: rtw89: 8852c: rfk: refine target channel calculation in _rx_dck_channel_calc() wifi: rtlwifi: pci: wait for firmware loading before releasing memory wifi: rtlwifi: fix memory leaks and invalid access at probe error path wifi: rtlwifi: destroy workqueue at rtl_deinit_core wifi: rtlwifi: remove unused check_buddy_priv wifi: rtw89: 8922a: update format of RFK pre-notify H2C command v2 wifi: rtw89: regd: update regulatory map to R68-R51 wifi: rtw89: 8852c: disable ER SU when 4x HE-LTF and 0.8 GI capability differ wifi: rtw89: disable firmware training HE GI and LTF wifi: rtw89: ps: update data for firmware and settings for hardware before/after PS wifi: rtw89: ps: refactor channel info to firmware before entering PS wifi: rtw89: ps: refactor PS flow to support MLO wifi: mwifiex: decrease timeout waiting for host sleep from 10s to 5s ... ==================== Link: https://patch.msgid.link/20241219185709.774EDC4CECE@smtp.kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-12-04wifi: mac80211: add EHT 320 MHz support for meshSathishkumar Muruganandam
Currently, ieee80211_ie_build_he_oper() lacks support for 320 MHz handling (already noted as a TODO). This is because 320 MHz is not included in IEEE 802.11-ax. However, IEEE 802.11-be introduces 320 MHz support and if the chandef indicates a 320 MHz bandwidth and is used directly as it is, it will result in an incorrect HE Operation Information Element. In order to support EHT 320 MHz, HE Operation Element should indicate bandwidth as 160 MHz only. In EHT Operation IE, the correct bandwidth will be present. Devices capable of EHT can parse EHT Information Element and connect in 320 MHz and other HE capable devices can parse HE and can connect in 160 MHz. Add support to downgrade the bandwidth in ieee80211_ie_build_he_oper() during 320 MHz operation and advertise it. Signed-off-by: Sathishkumar Muruganandam <quic_murugana@quicinc.com> Signed-off-by: Aditya Kumar Singh <quic_adisi@quicinc.com> Link: https://patch.msgid.link/20241119-mesh_320mhz_support-v1-1-f9463338d584@quicinc.com Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-12-03wifi: mac80211: fix a queue stall in certain cases of CSAEmmanuel Grumbach
If we got an unprotected action frame with CSA and then we heard the beacon with the CSA IE, we'll block the queues with the CSA reason twice. Since this reason is refcounted, we won't wake up the queues since we wake them up only once and the ref count will never reach 0. This led to blocked queues that prevented any activity (even disconnection wouldn't reset the queue state and the only way to recover would be to reload the kernel module. Fix this by not refcounting the CSA reason. It becomes now pointless to maintain the csa_blocked_queues state. Remove it. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Fixes: 414e090bc41d ("wifi: mac80211: restrict public action ECSA frame handling") Closes: https://bugzilla.kernel.org/show_bug.cgi?id=219447 Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://patch.msgid.link/20241119173108.5ea90828c2cc.I4f89e58572fb71ae48e47a81e74595cac410fbac@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-12-03wifi: mac80211: wake the queues in case of failure in resumeEmmanuel Grumbach
In case we fail to resume, we'll WARN with "Hardware became unavailable during restart." and we'll wait until user space does something. It'll typically bring the interface down and up to recover. This won't work though because the queues are still stopped on IEEE80211_QUEUE_STOP_REASON_SUSPEND reason. Make sure we clear that reason so that we give a chance to the recovery to succeed. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Closes: https://bugzilla.kernel.org/show_bug.cgi?id=219447 Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://patch.msgid.link/20241119173108.cd628f560f97.I76a15fdb92de450e5329940125f3c58916be3942@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-10-23wifi: mac80211: add flag to opt out of virtual monitor supportFelix Fietkau
This is useful for multi-radio devices that are capable of monitoring on multiple channels simultanenously. When this flag is set, each monitor interface is passed to the driver individually and can have a configured channel. The vif mac address for non-active monitor interfaces is cleared, in order to allow the driver to tell them apart from active ones. Signed-off-by: Felix Fietkau <nbd@nbd.name> Link: https://patch.msgid.link/3c55505ee0cf0a5f141fbcb30d1e8be8d9f40373.1728462320.git-series.nbd@nbd.name Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-10-08wifi: mac80211, cfg80211: miscellaneous spelling fixesDmitry Antipov
Correct spelling here and there as suggested by codespell. Signed-off-by: Dmitry Antipov <dmantipov@yandex.ru> Link: https://patch.msgid.link/20240913084919.118862-1-dmantipov@yandex.ru Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-10-08wifi: mac80211: constify ieee80211_ie_build_{he,eht}_oper() chandefJeff Johnson
The chandef parameter passed to ieee80211_ie_build_he_oper() and ieee80211_ie_build_eht_oper is read-only. Since it is never modified, add the const qualifier to this parameter. This makes these consistent with ieee80211_ie_build_ht_oper() and ieee80211_ie_build_vht_oper(). Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com> Link: https://patch.msgid.link/20240910-wireless-utils-constify-v1-1-e59947bcb3c3@quicinc.com Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-09-06wifi: mac80211: handle ieee80211_radar_detected() for MLOAditya Kumar Singh
Currently DFS works under assumption there could be only one channel context in the hardware. Hence, drivers just calls the function ieee80211_radar_detected() passing the hardware structure. However, with MLO, this obviously will not work since number of channel contexts will be more than one and hence drivers would need to pass the channel information as well on which the radar is detected. Also, when radar is detected in one of the links, other link's CAC should not be cancelled. Hence, in order to support DFS with MLO, do the following changes - * Add channel context conf pointer as an argument to the function ieee80211_radar_detected(). During MLO, drivers would have to pass on which channel context conf radar is detected. Otherwise, drivers could just pass NULL. * ieee80211_radar_detected() will iterate over all channel contexts present and * if channel context conf is passed, only mark that as radar detected * if NULL is passed, then mark all channel contexts as radar detected * Then as usual, schedule the radar detected work. * In the worker, go over all the contexts again and for all such context which is marked with radar detected, cancel the ongoing CAC by calling ieee80211_dfs_cac_cancel() and then notify cfg80211 via cfg80211_radar_event(). * To cancel the CAC, pass the channel context as well where radar is detected to ieee80211_dfs_cac_cancel(). This ensures that CAC is canceled only on the links using the provided context, leaving other links unaffected. This would also help in scenarios where there is split phy 5 GHz radio, which is capable of DFS channels in both lower and upper band. In this case, simultaneous radars can be detected. Signed-off-by: Aditya Kumar Singh <quic_adisi@quicinc.com> Link: https://patch.msgid.link/20240906064426.2101315-9-quic_adisi@quicinc.com Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-09-06wifi: mac80211: handle DFS per linkAditya Kumar Singh
In order to support DFS with MLO, handle the link ID now passed from cfg80211, adjust the code to do everything per link and call the notifications to cfg80211 correctly. Signed-off-by: Aditya Kumar Singh <quic_adisi@quicinc.com> Link: https://patch.msgid.link/20240906064426.2101315-7-quic_adisi@quicinc.com Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-09-06wifi: cfg80211: handle DFS per linkAditya Kumar Singh
Currently, during starting a radar detection, no link id information is parsed and passed down. In order to support starting radar detection during Multi Link Operation, it is required to pass link id as well. Add changes to first parse and then pass link id in the start radar detection path. Additionally, update notification APIs to allow drivers/mac80211 to pass the link ID. However, everything is handled at link 0 only until all API's are ready to handle it per link. Signed-off-by: Aditya Kumar Singh <quic_adisi@quicinc.com> Link: https://patch.msgid.link/20240906064426.2101315-6-quic_adisi@quicinc.com Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-09-06wifi: cfg80211: move DFS related members to links[] in wireless_devAditya Kumar Singh
A few members related to DFS handling are currently under per wireless device data structure. However, in order to support DFS with MLO, there is a need to have them on a per-link manner. Hence, as a preliminary step, move members cac_started, cac_start_time and cac_time_ms to be on a per-link basis. Since currently, link ID is not known at all places, use default value of 0 for now. Signed-off-by: Aditya Kumar Singh <quic_adisi@quicinc.com> Link: https://patch.msgid.link/20240906064426.2101315-5-quic_adisi@quicinc.com Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-09-06Revert "wifi: mac80211: move radar detect work to sdata"Aditya Kumar Singh
This reverts commit ce9e660ef32e ("wifi: mac80211: move radar detect work to sdata"). To enable radar detection with MLO, it’s essential to handle it on a per-link basis. This is because when using MLO, multiple links may already be active and beaconing. In this scenario, another link should be able to initiate a radar detection. Also, if underlying links are associated with different hardware devices but grouped together for MLO, they could potentially start radar detection simultaneously. Therefore, it makes sense to manage radar detection settings separately for each link by moving them back to a per-link data structure. Signed-off-by: Aditya Kumar Singh <quic_adisi@quicinc.com> Link: https://patch.msgid.link/20240906064426.2101315-2-quic_adisi@quicinc.com Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-09-04Merge tag 'wireless-next-2024-09-04' of ↵Jakub Kicinski
git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next Kalle Valo says: ==================== pull-request: wireless-next-2024-09-04 here's a pull request to net-next tree, more info below. Please let me know if there are any problems. ==================== Conflicts: drivers/net/wireless/ath/ath12k/hw.c 38055789d151 ("wifi: ath12k: use 128 bytes aligned iova in transmit path for WCN7850") 8be12629b428 ("wifi: ath12k: restore ASPM for supported hardwares only") https://lore.kernel.org/87msldyj97.fsf@kernel.org Link: https://patch.msgid.link/20240904153205.64C11C4CEC2@smtp.kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-08-28wifi: mac80211: fix RCU list iterationsJohannes Berg
There are a number of places where RCU list iteration is used, but that aren't (always) called with RCU held. Use just list_for_each_entry() in most, and annotate iface iteration with the required locks. Reviewed-by: Miriam Rachel Korenblit <miriam.rachel.korenblit@intel.com> Link: https://patch.msgid.link/20240827094939.ed8ac0b2f897.I8443c9c3c0f8051841353491dae758021b53115e@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-08-27wifi: mac80211: Add non-atomic station iteratorRory Little
Drivers may at times want to iterate their stations with a function which requires some non-atomic operations. ieee80211_iterate_stations_mtx() introduces an API to iterate stations while holding that wiphy's mutex. This allows the iterating function to do non-atomic operations safely. Signed-off-by: Rory Little <rory@candelatech.com> Link: https://patch.msgid.link/20240806004024.2014080-2-rory@candelatech.com [unify internal list iteration functions] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-07-26wifi: mac80211: use monitor sdata with driver only if desiredJohannes Berg
In commit 0d9c2beed116 ("wifi: mac80211: fix monitor channel with chanctx emulation") I changed mac80211 to always have an internal monitor_sdata to have something to have the chanctx bound to. However, if the driver didn't also have the WANT_MONITOR flag this would cause mac80211 to allocate it without telling the driver (which was intentional) but also use it for later APIs to the driver without it ever having known about it which was _not_ intentional. Check through the code and only use the monitor_sdata in the relevant places (TX, MU-MIMO follow settings, TX power, and interface iteration) when the WANT_MONITOR flag is set. Cc: stable@vger.kernel.org Fixes: 0d9c2beed116 ("wifi: mac80211: fix monitor channel with chanctx emulation") Reported-by: ZeroBeat <ZeroBeat@gmx.de> Closes: https://bugzilla.kernel.org/show_bug.cgi?id=219086 Tested-by: Lorenzo Bianconi <lorenzo@kernel.org> Link: https://patch.msgid.link/20240725184836.25d334157a8e.I02574086da2c5cf0e18264ce5807db6f14ffd9c0@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-07-09wifi: mac80211: extend ifcomb check functions for multi-radioFelix Fietkau
Add support for counting global and per-radio max/current number of channels, as well as checking radio-specific interface combinations. Signed-off-by: Felix Fietkau <nbd@nbd.name> Link: https://patch.msgid.link/e76307f8ce562a91a74faab274ae01f6a5ba0a2e.1720514221.git-series.nbd@nbd.name Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-07-09wifi: cfg80211: extend interface combination check for multi-radioFelix Fietkau
Add a field in struct iface_combination_params to check per-radio interface combinations instead of per-wiphy ones. Signed-off-by: Felix Fietkau <nbd@nbd.name> Link: https://patch.msgid.link/32b28da89c2d759b0324deeefe2be4cee91de18e.1720514221.git-series.nbd@nbd.name Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-06-27Merge tag 'wireless-next-2024-06-27' of ↵Jakub Kicinski
git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next Johannes Berg says: ==================== Highlights this time are: - cfg80211/nl80211: * improvements for 6 GHz regulatory flexibility - mac80211: * use generic netdev stats * multi-link improvements/fixes - brcmfmac: * MFP support (to enable WPA3) - wilc1000: * suspend/resume improvements - iwlwifi: * remove support for older FW for new devices * fast resume (keeping the device configured) - wl18xx: * support newer firmware versions * tag 'wireless-next-2024-06-27' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next: (100 commits) wifi: brcmfmac: of: Support interrupts-extended wifi: brcmsmac: advertise MFP_CAPABLE to enable WPA3 net: rfkill: Correct return value in invalid parameter case wifi: mac80211: fix NULL dereference at band check in starting tx ba session wifi: iwlwifi: mvm: fix rs.h kernel-doc wifi: iwlwifi: fw: api: datapath: fix kernel-doc wifi: iwlwifi: fix remaining mistagged kernel-doc comments wifi: iwlwifi: fix prototype mismatch kernel-doc warnings wifi: iwlwifi: fix kernel-doc in iwl-fh.h wifi: iwlwifi: fix kernel-doc in iwl-trans.h wifi: iwlwifi: pcie: fix kernel-doc wifi: iwlwifi: dvm: fix kernel-doc warnings wifi: iwlwifi: mvm: don't log error for failed UATS table read wifi: iwlwifi: trans: make bad state warnings wifi: iwlwifi: fw: api: fix some kernel-doc wifi: iwlwifi: mvm: remove init_dbg module parameter wifi: iwlwifi: update the BA notification API wifi: iwlwifi: mvm: always unblock EMLSR on ROC end wifi: iwlwifi: mvm: use IWL_FW_CHECK for link ID check wifi: iwlwifi: mvm: don't flush BSSes on restart with MLD API ... ==================== Link: https://patch.msgid.link/20240627114135.28507-3-johannes@sipsolutions.net Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-06-27Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski
Cross-merge networking fixes after downstream PR. No conflicts. Adjacent changes: e3f02f32a050 ("ionic: fix kernel panic due to multi-buffer handling") d9c04209990b ("ionic: Mark error paths in the data path as unlikely") Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-06-26wifi: mac80211: inform the low level if drv_stop() is a suspendEmmanuel Grumbach
This will allow the low level driver to take different actions for different flows. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://patch.msgid.link/20240618192529.739036208b6e.Ie18a2fe8e02bf2717549d39420b350cfdaf3d317@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-06-26wifi: mac80211: disable softirqs for queued frame handlingJohannes Berg
As noticed by syzbot, calling ieee80211_handle_queued_frames() (and actually handling frames there) requires softirqs to be disabled, since we call into the RX code. Fix that in the case of cleaning up frames left over during shutdown. Fixes: 177c6ae9725d ("wifi: mac80211: handle tasklet frames before stopping") Reported-by: syzbot+1d516edf1e74469ba5d3@syzkaller.appspotmail.com Link: https://patch.msgid.link/20240626091559.cd6f08105a6e.I74778610a5ff2cf8680964698131099d2960352a@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-06-26wifi: mac80211: update STA/chandef width during switchJohannes Berg
In channel switch without an additional channel context, where the reassign logic kicks in, we also need to update the station bandwidth and chandef minimum width correctly to avoid having station rate control configured to wider bandwidth than the channel context. Do that now. Reviewed-by: Miriam Rachel Korenblit <miriam.rachel.korenblit@intel.com> Link: https://patch.msgid.link/20240612143418.0bc3d28231b3.I51e76df86212057ca0469e235ba9bf4461cbee75@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-06-20Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski
Cross-merge networking fixes after downstream PR. Conflicts: drivers/net/ethernet/broadcom/bnxt/bnxt.c 1e7962114c10 ("bnxt_en: Restore PTP tx_avail count in case of skb_pad() error") 165f87691a89 ("bnxt_en: add timestamping statistics support") No adjacent changes. Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-06-14wifi: mac80211: fix monitor channel with chanctx emulationJohannes Berg
After the channel context emulation, there were reports that changing the monitor channel no longer works. This is because those drivers don't have WANT_MONITOR_VIF, so the setting the channel always exits out quickly. Fix this by always allocating the virtual monitor sdata, and simply not telling the driver about it unless it wanted to. This way, we have an interface/sdata to bind the chanctx to, and the emulation can work correctly. Cc: stable@vger.kernel.org Fixes: 0a44dfc07074 ("wifi: mac80211: simplify non-chanctx drivers") Reported-and-tested-by: Savyasaachi Vanga <savyasaachiv@gmail.com> Closes: https://lore.kernel.org/r/chwoymvpzwtbmzryrlitpwmta5j6mtndocxsyqvdyikqu63lon@gfds653hkknl Link: https://msgid.link/20240612122351.b12d4a109dde.I1831a44417faaab92bea1071209abbe4efbe3fba@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
generated by cgit v1.2.3 (git 2.46.0) at 2025-12-16 21:31:27 +0000