summaryrefslogtreecommitdiff
path: root/sound/pci
AgeCommit message (Collapse)Author
2025-11-25ALSA: ctxfi: Add support for Onkyo SE-300PCIE (OK0010)Harin Lee
Add support for the Onkyo SE-300PCIE, a Creative X-Fi CA20K2-based sound card with a custom hardware implementation that differs significantly from other CA20K2-based variants. Changes: - PCI quirk entry for OK0010 - Port 0x3 is utilized for dedicated RCA output (configured as I2S) - Modified GPIO pin mappings and states - 4-channel simultaneous ADC input support for line and microphone capture without input switching (similar to SB1270) - Simplified ADC initialization (no manual setup required) Signed-off-by: Harin Lee <me@harin.net> Signed-off-by: Takashi Iwai <tiwai@suse.de> Link: https://patch.msgid.link/20251124180501.2760421-7-me@harin.net
2025-11-25ALSA: ctxfi: Add support for dedicated RCA switchingHarin Lee
Add feature to support switching between the dedicated RCA output and the 7.1ch Front output. This is required for hardware that utilizes separate DAC circuits for RCA and 7.1ch channels. Changes: - Add dedicated_rca capability flag - Add "Analog Playback Route" mixer control - Implement logic to swap DAO inputs between RCA and Front ports Signed-off-by: Harin Lee <me@harin.net> Signed-off-by: Takashi Iwai <tiwai@suse.de> Link: https://patch.msgid.link/20251124180501.2760421-6-me@harin.net
2025-11-25ALSA: ctxfi: Refactor resource alloc for sparse mappingsHarin Lee
Refactor atc_get_resources(), atc_connect_resources(), and atc_release_resources() to allocate resources based on maximum type definitions. This allows specific resources to be conditionally skipped based on capabilities. This is necessary for hardware variants where resource allocations do not follow a sequential order. Signed-off-by: Harin Lee <me@harin.net> Signed-off-by: Takashi Iwai <tiwai@suse.de> Link: https://patch.msgid.link/20251124180501.2760421-5-me@harin.net
2025-11-25ALSA: ctxfi: Use explicit output flag for DAIO resourcesHarin Lee
Replace the index-based type check with an explicit output flag in struct daio and struct daio_desc. This allows handling DAIO resource types correctly regardless of their index. This is necessary for hardware variants where resource types do not follow a sequential order. Signed-off-by: Harin Lee <me@harin.net> Signed-off-by: Takashi Iwai <tiwai@suse.de> Link: https://patch.msgid.link/20251124180501.2760421-4-me@harin.net
2025-11-25ALSA: ctxfi: Add ADC helper functions for GPIOHarin Lee
Add helper functions hw_adc_stop(), hw_adc_start(), and hw_adc_reset() to encapsulate ADC reset sequence operations. These functions reduce duplication by centralizing the GPIO-based ADC control logic. Signed-off-by: Harin Lee <me@harin.net> Signed-off-by: Takashi Iwai <tiwai@suse.de> Link: https://patch.msgid.link/20251124180501.2760421-3-me@harin.net
2025-11-25ALSA: ctxfi: Add hw parameter to daio_mgr_dao_init()Harin Lee
Add a hw parameter to the daio_mgr_dao_init() function to provide access to model-specific information. This is necessary for proper configuration of S/PDIF and I2S output ports on different hardware variants. Signed-off-by: Harin Lee <me@harin.net> Signed-off-by: Takashi Iwai <tiwai@suse.de> Link: https://patch.msgid.link/20251124180501.2760421-2-me@harin.net
2025-11-20Merge branch 'for-linus' into for-nextTakashi Iwai
Pull 6.18-devel branch for applying the further HD-audio fixups for HP. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2025-11-17ALSA: au88x0: Fix incorrect error handling for PCI config readsHaotian Zhang
__snd_vortex_probe() uses pci_read_config_word() that returns PCIBIOS_* codes (positive values on error). However, the function checks 'err < 0' which can never be true for PCIBIOS_* codes, causing errors to be silently ignored. Check for non-zero return value and convert PCIBIOS_* codes using pcibios_err_to_errno() into normal errno before returning them. Signed-off-by: Haotian Zhang <vulab@iscas.ac.cn> Reviewed-by: Philipp Stanner <phasta@kernel.org> Link: https://patch.msgid.link/20251117065559.1138-1-vulab@iscas.ac.cn Signed-off-by: Takashi Iwai <tiwai@suse.de>
2025-11-08ALSA: au88x0: Fix array bounds warning in EQ driverswangdicheng
In file included from ../sound/pci/au88x0/au8830.c:15: In function ‘vortex_Eqlzr_SetAllBandsFromActiveCoeffSet’, ../sound/pci/au88x0/au88x0_eq.c:571:9: error: ‘vortex_EqHw_SetRightGainsTarget’ reading 2 bytes from a region of size 0 [-Werror=stringop-overread] vortex_EqHw_SetRightGainsTarget(vortex, &(eq->this130[eq->this10])); Modified the array access in vortex_Eqlzr_SetAllBandsFromActiveCoeffSet() to use pointer arithmetic instead of array indexing. This resolves a compiler warning that incorrectly flagged a buffer overread when accessing the EQ gain array. The this130 array has fixed size 20 and the index is safely within bounds, making the original code correct but confusing to static analysis. Signed-off-by: wangdicheng <wangdicheng@kylinos.cn> Link: https://patch.msgid.link/20251107024525.38454-1-wangdich9700@163.com Signed-off-by: Takashi Iwai <tiwai@suse.de>
2025-10-27ALSA: maestro3: using vmalloc_array() to handle the codetanze
Change array_size() to vmalloc_array(), due to vmalloc_array() being optimized better, using fewer instructions, and handles overflow more concisely. Signed-off-by: tanze <tanze@kylinos.cn> Link: https://patch.msgid.link/20251024105549.210654-1-tanze@kylinos.cn Signed-off-by: Takashi Iwai <tiwai@suse.de>
2025-09-15ALSA: asihpi: Simplify error handling in PCM substream setupJihed Chaibi
Refactor error handling in the PCM substream setup to combine redundant checks and improve code readability. Free the dpcm structure and return appropriate error codes (-EBUSY for HPI_ERROR_OBJ_ALREADY_OPEN, -EIO for other errors) in a single block. Signed-off-by: Jihed Chaibi <jihed.chaibi.dev@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2025-09-06ALSA: cs4281: Send the PCM period elapsed notification properlyChandra Mohan Sundar
As part of spin lock code cleanup using guard(), a new variable (period_elapsed) was introduced. However this variable is never set, causing period elapsed notification to be not sent. Set the value of period_elapsed appropiately. This issue was reported by static coverity analyzer. Fixes: 7a5127c2c8a5a ("ALSA: cs4281: Use guard() for spin locks") Signed-off-by: Chandra Mohan Sundar <chandramohan.explore@gmail.com> Link: https://patch.msgid.link/20250906162158.564899-1-chandramohan.explore@gmail.com Signed-off-by: Takashi Iwai <tiwai@suse.de>
2025-09-03ALSA: rme32: Fix serialization in snd_rme32_capture_adat_open()Dan Carpenter
We accidentally deleted the wrong line of code when we did the conversion to guard() locks. If the rme32->capture_substream has already been set we should return -EBUSY. Fixes: 8bb75ae244c5 ("ALSA: rme32: Use guard() for spin locks") Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org> Link: https://patch.msgid.link/aLfXmIQRFTXr5h8O@stanley.mountain Signed-off-by: Takashi Iwai <tiwai@suse.de>
2025-09-01ALSA: ymfpci: Use guard() for spin locksTakashi Iwai
Clean up the code using guard() for spin locks. Merely code refactoring, and no behavior change. Signed-off-by: Takashi Iwai <tiwai@suse.de> Link: https://patch.msgid.link/20250829144342.4290-62-tiwai@suse.de
2025-09-01ALSA: vx222: Use guard() for mutex locksTakashi Iwai
Replace the manual mutex lock/unlock pairs with guard() for code simplification. Only code refactoring, and no behavior change. Signed-off-by: Takashi Iwai <tiwai@suse.de> Link: https://patch.msgid.link/20250829144342.4290-61-tiwai@suse.de
2025-09-01ALSA: via82xx: Use guard() for spin locksTakashi Iwai
Clean up the code using guard() for spin locks. Merely code refactoring, and no behavior change. Signed-off-by: Takashi Iwai <tiwai@suse.de> Link: https://patch.msgid.link/20250829144342.4290-60-tiwai@suse.de
2025-09-01ALSA: trident: Use guard() for spin locksTakashi Iwai
Clean up the code using guard() for spin locks. Merely code refactoring, and no behavior change. Signed-off-by: Takashi Iwai <tiwai@suse.de> Link: https://patch.msgid.link/20250829144342.4290-59-tiwai@suse.de
2025-09-01ALSA: trident: Use guard() for mutex locksTakashi Iwai
Replace the manual mutex lock/unlock pairs with guard() for code simplification. Only code refactoring, and no behavior change. Signed-off-by: Takashi Iwai <tiwai@suse.de> Link: https://patch.msgid.link/20250829144342.4290-58-tiwai@suse.de
2025-09-01ALSA: sonicvibes: Use guard() for spin locksTakashi Iwai
Clean up the code using guard() for spin locks. Merely code refactoring, and no behavior change. Signed-off-by: Takashi Iwai <tiwai@suse.de> Link: https://patch.msgid.link/20250829144342.4290-57-tiwai@suse.de
2025-09-01ALSA: sis7019: Use guard() for spin locksTakashi Iwai
Clean up the code using guard() for spin locks. Merely code refactoring, and no behavior change. Signed-off-by: Takashi Iwai <tiwai@suse.de> Link: https://patch.msgid.link/20250829144342.4290-56-tiwai@suse.de
2025-09-01ALSA: sis7019: Use guard() for mutex locksTakashi Iwai
Replace the manual mutex lock/unlock pairs with guard() for code simplification. Only code refactoring, and no behavior change. Signed-off-by: Takashi Iwai <tiwai@suse.de> Link: https://patch.msgid.link/20250829144342.4290-55-tiwai@suse.de
2025-09-01ALSA: rme9652: Use guard() for spin locksTakashi Iwai
Clean up the code using guard() for spin locks. Merely code refactoring, and no behavior change. Signed-off-by: Takashi Iwai <tiwai@suse.de> Link: https://patch.msgid.link/20250829144342.4290-54-tiwai@suse.de
2025-09-01ALSA: hdspm: Use guard() for spin locksTakashi Iwai
Clean up the code using guard() for spin locks. Merely code refactoring, and no behavior change. Signed-off-by: Takashi Iwai <tiwai@suse.de> Link: https://patch.msgid.link/20250829144342.4290-53-tiwai@suse.de
2025-09-01ALSA: hdsp: Use guard() for spin locksTakashi Iwai
Clean up the code using guard() for spin locks. Merely code refactoring, and no behavior change. Signed-off-by: Takashi Iwai <tiwai@suse.de> Link: https://patch.msgid.link/20250829144342.4290-52-tiwai@suse.de
2025-09-01ALSA: rme96: Use guard() for spin locksTakashi Iwai
Clean up the code using guard() for spin locks. Merely code refactoring, and no behavior change. Signed-off-by: Takashi Iwai <tiwai@suse.de> Link: https://patch.msgid.link/20250829144342.4290-51-tiwai@suse.de
2025-09-01ALSA: rme32: Use guard() for spin locksTakashi Iwai
Clean up the code using guard() for spin locks. Merely code refactoring, and no behavior change. Signed-off-by: Takashi Iwai <tiwai@suse.de> Link: https://patch.msgid.link/20250829144342.4290-50-tiwai@suse.de
2025-09-01ALSA: pcxhr: Use guard() for mutex locksTakashi Iwai
Replace the manual mutex lock/unlock pairs with guard() for code simplification. Only code refactoring, and no behavior change. Signed-off-by: Takashi Iwai <tiwai@suse.de> Link: https://patch.msgid.link/20250829144342.4290-49-tiwai@suse.de
2025-09-01ALSA: oxygen: Use guard() for spin locksTakashi Iwai
Clean up the code using guard() for spin locks. Merely code refactoring, and no behavior change. Signed-off-by: Takashi Iwai <tiwai@suse.de> Link: https://patch.msgid.link/20250829144342.4290-48-tiwai@suse.de
2025-09-01ALSA: oxygen: Use guard() for mutex locksTakashi Iwai
Replace the manual mutex lock/unlock pairs with guard() for code simplification. Only code refactoring, and no behavior change. Signed-off-by: Takashi Iwai <tiwai@suse.de> Link: https://patch.msgid.link/20250829144342.4290-47-tiwai@suse.de
2025-09-01ALSA: nm256: Use guard() for spin locksTakashi Iwai
Clean up the code using guard() for spin locks. Merely code refactoring, and no behavior change. Signed-off-by: Takashi Iwai <tiwai@suse.de> Link: https://patch.msgid.link/20250829144342.4290-46-tiwai@suse.de
2025-09-01ALSA: nm256: Use guard() for mutex locksTakashi Iwai
Replace the manual mutex lock/unlock pairs with guard() for code simplification. Only code refactoring, and no behavior change. Signed-off-by: Takashi Iwai <tiwai@suse.de> Link: https://patch.msgid.link/20250829144342.4290-45-tiwai@suse.de
2025-09-01ALSA: mixart: Use guard() for mutex locksTakashi Iwai
Replace the manual mutex lock/unlock pairs with guard() for code simplification. Only code refactoring, and no behavior change. Signed-off-by: Takashi Iwai <tiwai@suse.de> Link: https://patch.msgid.link/20250829144342.4290-44-tiwai@suse.de
2025-09-01ALSA: maestro3: Use guard() for spin locksTakashi Iwai
Clean up the code using guard() for spin locks. Merely code refactoring, and no behavior change. Signed-off-by: Takashi Iwai <tiwai@suse.de> Link: https://patch.msgid.link/20250829144342.4290-43-tiwai@suse.de
2025-09-01ALSA: lx6464es: Use guard() for mutex locksTakashi Iwai
Replace the manual mutex lock/unlock pairs with guard() for code simplification. Only code refactoring, and no behavior change. Signed-off-by: Takashi Iwai <tiwai@suse.de> Link: https://patch.msgid.link/20250829144342.4290-42-tiwai@suse.de
2025-09-01ALSA: lola: Use guard() for spin locksTakashi Iwai
Clean up the code using guard() for spin locks. Merely code refactoring, and no behavior change. Signed-off-by: Takashi Iwai <tiwai@suse.de> Link: https://patch.msgid.link/20250829144342.4290-41-tiwai@suse.de
2025-09-01ALSA: lola: Use guard() for mutex locksTakashi Iwai
Replace the manual mutex lock/unlock pairs with guard() for code simplification. Only code refactoring, and no behavior change. Signed-off-by: Takashi Iwai <tiwai@suse.de> Link: https://patch.msgid.link/20250829144342.4290-40-tiwai@suse.de
2025-09-01ALSA: korg1212: Use guard() for spin locksTakashi Iwai
Clean up the code using guard() for spin locks. Merely code refactoring, and no behavior change. Signed-off-by: Takashi Iwai <tiwai@suse.de> Link: https://patch.msgid.link/20250829144342.4290-39-tiwai@suse.de
2025-09-01ALSA: korg1212: Use guard() for mutex locksTakashi Iwai
Replace the manual mutex lock/unlock pairs with guard() for code simplification. Only code refactoring, and no behavior change. Signed-off-by: Takashi Iwai <tiwai@suse.de> Link: https://patch.msgid.link/20250829144342.4290-38-tiwai@suse.de
2025-09-01ALSA: intel8x0: Use guard() for spin locksTakashi Iwai
Clean up the code using guard() for spin locks. Merely code refactoring, and no behavior change. Signed-off-by: Takashi Iwai <tiwai@suse.de> Link: https://patch.msgid.link/20250829144342.4290-37-tiwai@suse.de
2025-09-01ALSA: ice1712: Use guard() for spin locksTakashi Iwai
Clean up the code using guard() for spin locks. Merely code refactoring, and no behavior change. Signed-off-by: Takashi Iwai <tiwai@suse.de> Link: https://patch.msgid.link/20250829144342.4290-36-tiwai@suse.de
2025-09-01ALSA: ice1712: Use guard() for mutex locksTakashi Iwai
Replace the manual mutex lock/unlock pairs with guard() for code simplification. Only code refactoring, and no behavior change. Signed-off-by: Takashi Iwai <tiwai@suse.de> Link: https://patch.msgid.link/20250829144342.4290-35-tiwai@suse.de
2025-09-01ALSA: fm801: Use guard() for spin locksTakashi Iwai
Clean up the code using guard() for spin locks. Merely code refactoring, and no behavior change. Signed-off-by: Takashi Iwai <tiwai@suse.de> Link: https://patch.msgid.link/20250829144342.4290-34-tiwai@suse.de
2025-09-01ALSA: es1968: Use guard() for spin locksTakashi Iwai
Clean up the code using guard() for spin locks. Merely code refactoring, and no behavior change. Signed-off-by: Takashi Iwai <tiwai@suse.de> Link: https://patch.msgid.link/20250829144342.4290-33-tiwai@suse.de
2025-09-01ALSA: es1968: Use guard() for mutex locksTakashi Iwai
Replace the manual mutex lock/unlock pairs with guard() for code simplification. Only code refactoring, and no behavior change. Signed-off-by: Takashi Iwai <tiwai@suse.de> Link: https://patch.msgid.link/20250829144342.4290-32-tiwai@suse.de
2025-09-01ALSA: es1938: Use guard() for spin locksTakashi Iwai
Clean up the code using guard() for spin locks. Merely code refactoring, and no behavior change. Signed-off-by: Takashi Iwai <tiwai@suse.de> Link: https://patch.msgid.link/20250829144342.4290-31-tiwai@suse.de
2025-09-01ALSA: emu10k1x: Use guard() for spin locksTakashi Iwai
Clean up the code using guard() for spin locks. Merely code refactoring, and no behavior change. Signed-off-by: Takashi Iwai <tiwai@suse.de> Link: https://patch.msgid.link/20250829144342.4290-30-tiwai@suse.de
2025-09-01ALSA: emu10k1: Use guard() for spin locksTakashi Iwai
Clean up the code using guard() for spin locks. Merely code refactoring, and no behavior change. Signed-off-by: Takashi Iwai <tiwai@suse.de> Link: https://patch.msgid.link/20250829144342.4290-29-tiwai@suse.de
2025-09-01ALSA: emu10k1: Use guard() for emu1010 FPGA lockingTakashi Iwai
The snd_emu1010_fpga_lock() and _unlock() call pairs can be simplified gracefully with the introduction of guard(). Only code refactoring, and no functional changes. Signed-off-by: Takashi Iwai <tiwai@suse.de> Link: https://patch.msgid.link/20250829144342.4290-28-tiwai@suse.de
2025-09-01ALSA: emu10k1: Use guard() for mutex locksTakashi Iwai
Replace the manual mutex lock/unlock pairs with guard() for code simplification. Only code refactoring, and no behavior change. Signed-off-by: Takashi Iwai <tiwai@suse.de> Link: https://patch.msgid.link/20250829144342.4290-27-tiwai@suse.de
2025-09-01ALSA: echoaudio: Use guard() for spin locksTakashi Iwai
Clean up the code using guard() for spin locks. Merely code refactoring, and no behavior change. Signed-off-by: Takashi Iwai <tiwai@suse.de> Link: https://patch.msgid.link/20250829144342.4290-26-tiwai@suse.de
generated by cgit v1.2.3 (git 2.46.0) at 2025-12-12 06:51:34 +0000