| Age | Commit message (Collapse) | Author |
|---|
|
https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus
ASoC: Updates for v6.19
This is a very large set of updates, as well as some more extensive
cleanup work from Morimto-san we've also added a generic SCDA class
driver for SoundWire devices enabling us to support many chips with
no custom code. There's also a batch of new drivers added for both
SoCs and CODECs.
- Added a SoundWire SCDA generic class driver, pulling in a little
regmap work to support it.
- A *lot* of cleaup and API improvement work from Morimoto-san.
- Lots of work on the existing Cirrus, Intel, Maxim and Qualcomm
drivers.
- Support for Allwinner A523, Mediatek MT8189, Qualcomm QCM2290,
QRB2210 and SM6115, SpacemiT K1, and TI TAS2568, TAS5802, TAS5806,
TAS5815, TAS5828 and TAS5830.
This also pulls in some gpiolib changes supporting shared GPIOs in the
core there so we can convert some of the ASoC drivers open coding
handling of that to the core functionality.
|
|
Pull remaining 6.18-devel changes.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Merge series from Chancel Liu <chancel.liu@nxp.com>:
Add default quality for different platforms.
Set channel range control.
|
|
Modify the dsp read and write functions of the chip and normalize
the dsp read and write functions of all awinic amplifier
Signed-off-by: Weidong Wang <wangweidong.a@awinic.com>
Link: https://patch.msgid.link/20251128130323.628091-1-wangweidong.a@awinic.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
As the class driver is manually selectable, it needs to depend on
SOUNDWIRE, which is obviously necessary. Also the depends on in
SND_SOC_SDCA_HID needs to be pulled into SND_SOC_SDCA_CLASS as well,
since HID is selected by the class driver.
Fixes: 2d877d0659cb ("ASoC: SDCA: Add basic SDCA class driver")
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202511281223.DDs12LiC-lkp@intel.com/
Closes: https://lore.kernel.org/oe-kbuild-all/202511280822.i2fveMpR-lkp@intel.com/
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://patch.msgid.link/20251128102841.2930808-1-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
If the amp is still reporting FIRMWARE_MISSING after cs35l56_patch()
has completed it is helpful to log a warning.
After a complete firmware download the FIRMWARE_MISSING flag will be
clear. If this isn't the case, the driver should log a message to
report this.
The amp can produce basic audio output without firmware, as a fallback,
so this wasn't originally logged as a warning condition because the amp
is still in an operational state - just not with full functionality.
However, it was not at all obvious to an end user that anything is
unusual.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://patch.msgid.link/20251128112520.40067-1-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
This line is indented too far. Delete a tab.
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Link: https://patch.msgid.link/aSlNO0sqQr2A4vzG@stanley.mountain
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The range control register can't directly adjust volume gain according
to specification. It's the dynamic range of the CIC filter. The range
value should meet some conditions otherwise the channel data is not
reliable. Add an array in soc data to store const value in formula
with which range with all quality on different platforms can be
calculated. If the value set to range control exceeds the max range
there'll be warning logs.
Signed-off-by: Chancel Liu <chancel.liu@nxp.com>
Acked-by: Shengjiu Wang <shengjiu.wang@gmail.com>
Link: https://patch.msgid.link/20251127022652.674574-3-chancel.liu@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Add a default quality flag in soc data. For i.MX8MP/93/943 platforms on
which range control is constrained, set medium quality by default to
achieve better audio performance and wider adjustable range control.
Signed-off-by: Chancel Liu <chancel.liu@nxp.com>
Acked-by: Shengjiu Wang <shengjiu.wang@gmail.com>
Link: https://patch.msgid.link/20251127022652.674574-2-chancel.liu@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Merge series from Cezary Rojewski <cezary.rojewski@intel.com>:
Set of changes addressing gaps in DRAM offset checks, error paths and
PM.
The first three patches are straight-forward, the last three relate to
the power management. The standing out PM change is removal of the
catpt-driver as a system-suspend (S3) blocker. This is a suggestion from
Andy as indeed, audio is not a critical component that should prevent
the system from going into S3. Whatever happens, the driver can recover
on a follow up resume (S3 -> S0).
|
|
Merge series from Charles Keepax <ckeepax@opensource.cirrus.com>:
Now that the full class driver is in place we can add support to the
Intel machine driver for Cirrus's new SDCA audio CODEC the cs42l45. This
makes some minor tweaks to the machine driver itself to support SDCA
devices, and then adds the necessary tables etc. to define the device.
Note, this series shouldn't have any dependencies on the other series of
improvements to the class driver that is already on the list. So either
can be merged first.
|
|
Add support for the Cirrus Logic CS42L45 standalone using SoundWire.
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://patch.msgid.link/20251127163426.2500633-8-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Add the helper functions into the machine driver for the cs42l45,
this will register a jack for jack detection and add things into
to the components string if they are needed.
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://patch.msgid.link/20251127163426.2500633-7-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Currently the sof_sdw machine driver assumes that all devices involved
in the sound card are connected through a DAI link. However for SDCA
devices we still want the HID (Human Interface Device, used for jack
buttons) to be part of the sound card, but it contains no DAI links.
Add support into the machine driver to specify a list of auxiliary
devices to merged into the card.
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://patch.msgid.link/20251127163426.2500633-6-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
As SDCA devices will support each DAI link on a different child device,
move the codec name from codec_info to each dai_info. To allow the
appropriate function device to be bound to each DAI link.
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://patch.msgid.link/20251127163426.2500633-5-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The assumption so far is that all the DAI links for a given audio part
would be on the same device. However, as SDCA implements each audio
function on a separate auxiliary driver this will no longer be true.
This means it is necessary to add additional codec_conf structures to
get the prefix for an audio part to apply to all the auxiliary drivers
that make up that part.
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://patch.msgid.link/20251127163426.2500633-4-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
There have been some complaints around the UCM files for SDCA
devices that the control system is quite hard to follow. This is
definitely true without the specification handy the naming can be
a little cryptic. However, as most of the information is parsed
from DisCo there are some limits to what the driver can safely do
to improve this.
However, one area that can be improved is the non-streaming
input/output terminals. These have a field (enum sdca_terminal_type)
that describes the usage of that terminal. These types can be
appended to the entity name to give the users a better clue as
to the purpose. For example "OT 43", would now become "OT 43
Headphone". This would follow through into the jack controls which
would change from "OT 43 Jack" to "OT 43 Headphone Jack", making the
purpose much more obvious to the user.
This provides slightly more readable controls without relying on
implicit knowledge that individual parts might not conform to.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://patch.msgid.link/20251127163426.2500633-3-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Currently mute controls will be called "FU xx Mute Switch" (note
the switch is added programmatically outside the coverage of this
patch) and the accompanying volume control would be called "FU xx
Channel Volume". These names are taken from the SDCA specification,
however, this does not mesh well with the ALSA naming system. ALSA
generally expects enables rather than mutes and expects that mutes
and volumes have matching names.
Update the names and invert the mute controls to make them more
standard "FU XX Channel Switch", this does slightly deviate from
the SDCA specification but it makes the rest of the Linux ecosystem
a lot happier.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://patch.msgid.link/20251127163426.2500633-2-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The soundwire regmap that may be allocated during probe is not freed on
late probe failures.
Add the missing error handling.
Fixes: be2af391cea0 ("ASoC: codecs: Add WCD939x Soundwire devices driver")
Cc: stable@vger.kernel.org # 6.9
Cc: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Johan Hovold <johan@kernel.org>
Link: https://patch.msgid.link/20251127135057.2216-1-johan@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Use the __free(kfree) cleanup to replace instances of manually
calling kfree(). Also make some code path simplifications that this
allows.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://patch.msgid.link/20251127155817.1374079-1-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Even if something goes wrong when performing suspend on DSP, from the
system perspective the component is not critical enough to block the
suspend operation entirely. Leaving recovery to next resume() suffices.
Suggested-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://patch.msgid.link/20251126095523.3925364-7-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
If pm_runtime_resume_and_get() fails, follow up pm_runtime_xxx()
operate on device in erroneous state.
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://patch.msgid.link/20251126095523.3925364-6-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
catpt_dai_pcm_new() is called during the bring up sequence of the
machine board device which is a different device to the parent (DSP)
device yet utilizes pm_runtime_xxx() against it in order to send IPCs.
If the parent's pm_runtime is not configured before that happens,
errors will occur.
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://patch.msgid.link/20251126095523.3925364-5-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Do not leave any resources hanging on the DSP side if
applying user settings fails.
Fixes: 768a3a3b327d ("ASoC: Intel: catpt: Optimize applying user settings")
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://patch.msgid.link/20251126095523.3925364-4-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
There is a number of interfaces available for manipulating instances of
struct resource. To improve readability, move away from manual editing
in favor of the common interface.
While at it, adjust spacing so that both code blocks, while found in
separate functions, looks cohesive.
Suggested-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://patch.msgid.link/20251126095523.3925364-3-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Verify if the entire block is found within DRAM, not just
the start of it.
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://patch.msgid.link/20251126095523.3925364-2-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Merge series from Johan Hovold <johan@kernel.org>:
This series fixes device and OF node reference leaks during probe and
a clock prepare imbalance on probe failures.
Included is a related cleanup of an error path.
|
|
Merge series from Jaroslav Kysela <perex@perex.cz>:
Add missing build configuration and fix the i2c probe function to follow
latest i2c core interface.
Jaroslav Kysela (2):
ASoC: nau8325: use simple i2c probe function
ASoC: nau8325: add missing build config
sound/soc/codecs/Kconfig | 5 +++++
sound/soc/codecs/Makefile | 2 ++
sound/soc/codecs/nau8325.c | 3 +--
3 files changed, 8 insertions(+), 2 deletions(-)
--
2.51.1
|
|
Smatch complains that the call to snd_soc_component_get_drvdata(component)
will dereference "component" so this NULL check is too late. The probe()
function will never be called with a NULL component pointer so just
delete the check.
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Link: https://patch.msgid.link/aScUKqCEhSIZoOmg@stanley.mountain
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
memset_io() writes memory byte by byte with __raw_writeb() on the arm
platform if the size is word. but XCVR data RAM memory can't be accessed
with byte address, so with memset_io() the channel status control memory
is not really cleared, use writel_relaxed() instead.
Fixes: 28564486866f ("ASoC: fsl_xcvr: Add XCVR ASoC CPU DAI driver")
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Link: https://patch.msgid.link/20251126064509.1900974-1-shengjiu.wang@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The ALSA SoC driver for Tegra runs also on SoCs without the Tegra20 APB DMA
controller (e.g. Tegra234).
Signed-off-by: Francesco Lavra <flavra@baylibre.com>
Link: https://patch.msgid.link/20251126112926.4126757-1-flavra@baylibre.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
This configuration was missing from the initial commit.
Found by Jiri Benc <jbenc@redhat.com>
Fixes: c0a3873b9938 ("ASoC: nau8325: new driver")
Cc: Seven Lee <wtli@nuvoton.com>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Link: https://patch.msgid.link/20251126091759.2490019-3-perex@perex.cz
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The i2c probe functions here don't use the id information provided in
their second argument, so the single-parameter i2c probe function
("probe_new") can be used instead.
This avoids scanning the identifier tables during probes.
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Link: https://patch.msgid.link/20251126091759.2490019-2-perex@perex.cz
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Use dev_err_probe() to simplify the code. This also silences -517 errors.
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Link: https://patch.msgid.link/20251125101334.1596381-1-alexander.stein@ew.tq-group.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Use an error label for deregistering also the PCM DMA for consistency.
Signed-off-by: Johan Hovold <johan@kernel.org>
Reviewed-by: olivier moysan <olivier.moysan@foss.st.com>
Link: https://patch.msgid.link/20251124104908.15754-5-johan@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The reference taken to the sync provider OF node when probing the
platform device is currently only dropped if the set_sync() callback
fails during DAI probe.
Make sure to drop the reference on platform probe failures (e.g. probe
deferral) and on driver unbind.
This also avoids a potential use-after-free in case the DAI is ever
reprobed without first rebinding the platform driver.
Fixes: 5914d285f6b7 ("ASoC: stm32: sai: Add synchronization support")
Fixes: d4180b4c02e7 ("ASoC: stm32: sai: fix set_sync service")
Cc: Olivier Moysan <olivier.moysan@st.com>
Cc: stable@vger.kernel.org # 4.16: d4180b4c02e7
Signed-off-by: Johan Hovold <johan@kernel.org>
Reviewed-by: olivier moysan <olivier.moysan@foss.st.com>
Link: https://patch.msgid.link/20251124104908.15754-4-johan@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Make sure to unprepare the parent clock also on probe failures (e.g.
probe deferral).
Fixes: a14bf98c045b ("ASoC: stm32: sai: fix possible circular locking")
Cc: stable@vger.kernel.org # 5.5
Cc: Olivier Moysan <olivier.moysan@st.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
Reviewed-by: olivier moysan <olivier.moysan@foss.st.com>
Link: https://patch.msgid.link/20251124104908.15754-3-johan@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Make sure to drop the reference taken when looking up the sync provider
device and its driver data during DAI probe on probe failures and on
unbind.
Note that holding a reference to a device does not prevent its driver
data from going away so there is no point in keeping the reference.
Fixes: 7dd0d835582f ("ASoC: stm32: sai: simplify sync modes management")
Fixes: 1c3816a19487 ("ASoC: stm32: sai: add missing put_device()")
Cc: stable@vger.kernel.org # 4.16: 1c3816a19487
Cc: olivier moysan <olivier.moysan@st.com>
Cc: Wen Yang <yellowriver2010@hotmail.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
Reviewed-by: olivier moysan <olivier.moysan@foss.st.com>
Link: https://patch.msgid.link/20251124104908.15754-2-johan@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The sdca_dev_register() function never returns NULL, it returns error
pointers on error. Fix the error checking to match.
Fixes: 4496d1c65bad ("ASoC: SDCA: add function devices")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://patch.msgid.link/aSW1UOgMCiQIaZG8@stanley.mountain
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
KUnit automatically deactivates stubs when a test case exits, so there
is no need to explicitly call kunit_deactivate_static_stub() in every
test function.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://patch.msgid.link/20251124162016.30446-1-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The architectures supported by this driver have a maximum of 32-bits
of address, so we don't need more than 32-bits to store the length of
control data. Change the length in struct cs_dsp_coeff_ctl to an
unsigned int instead of a size_t. Also make a corresponding trivial
change to wm_adsp.c to prevent a compiler warning.
Tested on x86_64 builds this saves at least 4 bytes per control
(another 4 bytes might be saved if the compiler was inserting padding
to align the size_t).
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://patch.msgid.link/20251124171536.78962-1-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
A wrong preiod at the end of the sentence was reported by one of my
customers. Their thorough code review is greatly appreciated.
Fixes: 49e2e353fb0d ("ASoC: tas2781: Add Calibration Kcontrols for Chromebook")
Signed-off-by: Shenghao Ding <shenghao-ding@ti.com>
Link: https://patch.msgid.link/20251121234427.402-1-shenghao-ding@ti.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The new variable of reset was added for TAS58XX on TAS5825 first.
And TAS5802/5815... was added later, so this reset variable check
should be changed to lowest chip of TAS58XX.
Fixes: 53a3c6e22283 ("ASoC: tas2781: Support more newly-released amplifiers tas58xx in the driver")
Signed-off-by: Baojun Xu <baojun.xu@ti.com>
Link: https://patch.msgid.link/20251124031542.2793-1-baojun.xu@ti.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Merge series from Richard Fitzgerald <rf@opensource.cirrus.com>:
The CAL_SET_STATUS and CAL_DATA_RB controls are volatile and read-only, but
the existing ASoC macros to define controls don't allow setting access
permissions, so those controls were marked as non-volatile read/write.
These four patches fix that.
The first two patches add two new control macros to soc.h. I really don't
like codec drivers open-coding a kcontrol_new content for a control that
will be managed by the ASoC info/get/put handlers. If a new type of ASoC
control definition is needed it's better to have it in soc.h so all the
dependencies between ASoC and the kcontrol_new content are in one place.
|
|
Merge series from Charles Keepax <ckeepax@opensource.cirrus.com>:
This series adds an initial SDCA class driver, this consists of a
primary driver attached to the SoundWire device, and auxiliary drivers
representing each of the functions of the SDCA device. These drivers all
use the APIs added over the past series's to provide the class
functionality, as such these final drivers themselves are quite thin.
Also a few fix ups at the start of the series that have gathered up
whilst the last SDCA series was in review.
|
|
snprintf() as defined by the C99 standard,returns the
number of characters that *would have been* written if
enough space were available.Use scnprintf() that returns
the actual number of characters written.
Link: https://github.com/KSPP/linux/issues/105
Signed-off-by: HariKrishna Sagala <hariconscious@gmail.com>
Link: https://patch.msgid.link/20251113142637.259737-2-hariconscious@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
WCD934x provides register read/write interface to soundwire controller via
slimbus. Eventhough there was no direct compile time dependency for
this so far, however after adding common wcd functions this dependency
became explict.
We can either move the soundwire specific bits from wcd-common to wcd-sdw.c or
something on those lines or explicity add this dependency in Kconfig.
Moving this wcd-sdw can fix reported compile issue but it does not make
sense to select this codec without soundwire configs.
Given the fact that WCD934x is very much providing soundwire functionality
it is better to specify the soundwire dependency explicity in Kconfig
which should also fix the below compile time error with combination
of wcd934x a built-in and soundwire a module and also allow this codec
selection only when soundwire is available.
Error log:
wcd-common.c:undefiined reference to `sdw_write'
sound/soc/codecs/wcd-common.o: in function `wcd_bus_config':
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202511210405.zd9wig5Z-lkp@intel.com/
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@oss.qualcomm.com>
Link: https://patch.msgid.link/20251121143258.229138-1-srinivas.kandagatla@oss.qualcomm.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Add a driver to support the individual SDCA functions within the class
driver. Use the SDCA helpers to parse the DisCo information and register
a function driver based on those properties. Manage the boot of the
function, reset, FDL, defaults. Manage the function level register map.
Co-developed-by: Maciej Strozek <mstrozek@opensource.cirrus.com>
Tested-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Maciej Strozek <mstrozek@opensource.cirrus.com>
Reviewed-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Tested-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://patch.msgid.link/20251120153023.2105663-14-ckeepax@opensource.cirrus.com
Reviewed-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Add a device level driver as the entry point for the class driver.
Additional auxiliary drivers will be registered to support each function
within the device. This driver will register those function drivers and
provide the device level functionality, such as monitoring bus
attach/detach, the device level register map, and the root for the IRQ
handling.
Co-developed-by: Maciej Strozek <mstrozek@opensource.cirrus.com>
Tested-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Maciej Strozek <mstrozek@opensource.cirrus.com>
Reviewed-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Tested-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://patch.msgid.link/20251120153023.2105663-13-ckeepax@opensource.cirrus.com
Reviewed-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Use the auxiliary bus to register/unregister subdevices for each
function. Each function will be handled with a separate driver,
matched using a name.
If a vendor wants to override a specific function driver, they could
use a custom name to match with a custom function driver.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Tested-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Maciej Strozek <mstrozek@opensource.cirrus.com>
Reviewed-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Tested-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://patch.msgid.link/20251120153023.2105663-12-ckeepax@opensource.cirrus.com
Reviewed-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
