| Age | Commit message (Collapse) | Author |
|---|
|
Add a function to get the name of a CPU feature. The function is
architecture dependent and currently only implemented for x86. The
feature names are automatically generated from the cpufeatures.h
include file.
Signed-off-by: Alexandre Chartre <alexandre.chartre@oracle.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Josh Poimboeuf <jpoimboe@kernel.org>
Link: https://patch.msgid.link/20251121095340.464045-27-alexandre.chartre@oracle.com
|
|
When tracing function validation, instruction state changes can
report changes involving registers. These registers are reported
with the name "r<num>" (e.g. "r3"). Print the CPU specific register
name instead of a generic name (e.g. print "rbx" instead of "r3"
on x86).
Signed-off-by: Alexandre Chartre <alexandre.chartre@oracle.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Josh Poimboeuf <jpoimboe@kernel.org>
Link: https://patch.msgid.link/20251121095340.464045-13-alexandre.chartre@oracle.com
|
|
objtool executes the objdump command to disassemble code. Use libopcodes
instead to have more control about the disassembly scope and output.
If libopcodes is not present then objtool is built without disassembly
support.
Signed-off-by: Alexandre Chartre <alexandre.chartre@oracle.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Josh Poimboeuf <jpoimboe@kernel.org>
Link: https://patch.msgid.link/20251121095340.464045-4-alexandre.chartre@oracle.com
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/jpoimboe/linux
This series introduces new objtool features and a klp-build script to
generate livepatch modules using a source .patch as input.
This builds on concepts from the longstanding out-of-tree kpatch [1]
project which began in 2012 and has been used for many years to generate
livepatch modules for production kernels. However, this is a complete
rewrite which incorporates hard-earned lessons from 12+ years of
maintaining kpatch.
Key improvements compared to kpatch-build:
- Integrated with objtool: Leverages objtool's existing control-flow
graph analysis to help detect changed functions.
- Works on vmlinux.o: Supports late-linked objects, making it
compatible with LTO, IBT, and similar.
- Simplified code base: ~3k fewer lines of code.
- Upstream: No more out-of-tree #ifdef hacks, far less cruft.
- Cleaner internals: Vastly simplified logic for symbol/section/reloc
inclusion and special section extraction.
- Robust __LINE__ macro handling: Avoids false positive binary diffs
caused by the __LINE__ macro by introducing a fix-patch-lines script
which injects #line directives into the source .patch to preserve
the original line numbers at compile time.
The primary user interface is the klp-build script which does the
following:
- Builds an original kernel with -function-sections and
-fdata-sections, plus objtool function checksumming.
- Applies the .patch file and rebuilds the kernel using the same
options.
- Runs 'objtool klp diff' to detect changed functions and generate
intermediate binary diff objects.
- Builds a kernel module which links the diff objects with some
livepatch module init code (scripts/livepatch/init.c).
- Finalizes the livepatch module (aka work around linker wreckage)
using 'objtool klp post-link'.
I've tested with a variety of patches on defconfig and Fedora-config
kernels with both GCC and Clang.
|
|
Add a new klp diff subcommand which performs a binary diff between two
object files and extracts changed functions into a new object which can
then be linked into a livepatch module.
This builds on concepts from the longstanding out-of-tree kpatch [1]
project which began in 2012 and has been used for many years to generate
livepatch modules for production kernels. However, this is a complete
rewrite which incorporates hard-earned lessons from 12+ years of
maintaining kpatch.
Key improvements compared to kpatch-build:
- Integrated with objtool: Leverages objtool's existing control-flow
graph analysis to help detect changed functions.
- Works on vmlinux.o: Supports late-linked objects, making it
compatible with LTO, IBT, and similar.
- Simplified code base: ~3k fewer lines of code.
- Upstream: No more out-of-tree #ifdef hacks, far less cruft.
- Cleaner internals: Vastly simplified logic for symbol/section/reloc
inclusion and special section extraction.
- Robust __LINE__ macro handling: Avoids false positive binary diffs
caused by the __LINE__ macro by introducing a fix-patch-lines script
(coming in a later patch) which injects #line directives into the
source .patch to preserve the original line numbers at compile time.
Note the end result of this subcommand is not yet functionally complete.
Livepatch needs some ELF magic which linkers don't like:
- Two relocation sections (.rela*, .klp.rela*) for the same text
section.
- Use of SHN_LIVEPATCH to mark livepatch symbols.
Unfortunately linkers tend to mangle such things. To work around that,
klp diff generates a linker-compliant intermediate binary which encodes
the relevant KLP section/reloc/symbol metadata.
After module linking, a klp post-link step (coming soon) will clean up
the mess and convert the linked .ko into a fully compliant livepatch
module.
Note this subcommand requires the diffed binaries to have been compiled
with -ffunction-sections and -fdata-sections, and processed with
'objtool --checksum'. Those constraints will be handled by a klp-build
script introduced in a later patch.
Without '-ffunction-sections -fdata-sections', reliable object diffing
would be infeasible due to toolchain limitations:
- For intra-file+intra-section references, the compiler might
occasionally generated hard-coded instruction offsets instead of
relocations.
- Section-symbol-based references can be ambiguous:
- Overlapping or zero-length symbols create ambiguity as to which
symbol is being referenced.
- A reference to the end of a symbol (e.g., checking array bounds)
can be misinterpreted as a reference to the next symbol, or vice
versa.
A potential future alternative to '-ffunction-sections -fdata-sections'
would be to introduce a toolchain option that forces symbol-based
(non-section) relocations.
Acked-by: Petr Mladek <pmladek@suse.com>
Tested-by: Joe Lawrence <joe.lawrence@redhat.com>
Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
|
|
... for reading annotation types.
Acked-by: Petr Mladek <pmladek@suse.com>
Tested-by: Joe Lawrence <joe.lawrence@redhat.com>
Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
|
|
Add some helper macros to improve readability.
Acked-by: Petr Mladek <pmladek@suse.com>
Tested-by: Joe Lawrence <joe.lawrence@redhat.com>
Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
|
|
Use 'const char *' where applicable.
Acked-by: Petr Mladek <pmladek@suse.com>
Tested-by: Joe Lawrence <joe.lawrence@redhat.com>
Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
|
|
__pa_symbol() generates a relocation which refers to a physical address.
Convert it to back its virtual form before calculating the addend.
Acked-by: Petr Mladek <pmladek@suse.com>
Tested-by: Joe Lawrence <joe.lawrence@redhat.com>
Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
|
|
On x86, arch_dest_reloc_offset() hardcodes the addend adjustment to
four, but the actual adjustment depends on the relocation type. Fix
that.
Acked-by: Petr Mladek <pmladek@suse.com>
Tested-by: Joe Lawrence <joe.lawrence@redhat.com>
Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
|
|
For x86_64 the kernel consistently uses 2 instructions for all NOPs:
90 - NOP
0f 1f /0 - NOPL
Notably:
- REP NOP is PAUSE, not a NOP instruction.
- 0f {0c...0f} is reserved space,
except for 0f 0d /1, which is PREFETCHW, not a NOP.
- 0f {19,1c...1f} is reserved space,
except for 0f 1f /0, which is NOPL.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
|
|
Per commit 85a2d4a890dc ("x86,ibt: Use UDB instead of 0xEA"), make
sure objtool also recognises UDB as a #UD instruction.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Alexandre Chartre <alexandre.chartre@oracle.com>
|
|
Was properly fixed in the decoder with commit 4b626015e1bf ("x86/insn:
Stop decoding i64 instructions in x86-64 mode at opcode")
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Alexandre Chartre <alexandre.chartre@oracle.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 SEV and apic updates from Borislav Petkov:
- Add functionality to provide runtime firmware updates for the non-x86
parts of an AMD platform like the security processor (ASP) firmware,
modules etc, for example. The intent being that these updates are
interim, live fixups before a proper BIOS update can be attempted
- Add guest support for AMD's Secure AVIC feature which gives encrypted
guests the needed protection against a malicious hypervisor
generating unexpected interrupts and injecting them into such guest,
thus interfering with its operation in an unexpected and negative
manner.
The advantage of this scheme is that the guest determines which
interrupts and when to accept them vs leaving that to the benevolence
(or not) of the hypervisor
- Strictly separate the startup code from the rest of the kernel where
former is executed from the initial 1:1 mapping of memory.
The problem was that the toolchain-generated version of the code was
being executed from a different mapping of memory than what was
"assumed" during code generation, needing an ever-growing pile of
fixups for absolute memory references which are invalid in the early,
1:1 memory mapping during boot.
The major advantage of this is that there's no need to check the 1:1
mapping portion of the code for absolute relocations anymore and get
rid of the RIP_REL_REF() macro sprinkling all over the place.
For more info, see Ard's very detailed writeup on this [1]
- The usual cleanups and fixes
Link: https://lore.kernel.org/r/CAMj1kXEzKEuePEiHB%2BHxvfQbFz0sTiHdn4B%2B%2BzVBJ2mhkPkQ4Q@mail.gmail.com [1]
* tag 'x86_apic_for_v6.18_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (49 commits)
x86/boot: Drop erroneous __init annotation from early_set_pages_state()
crypto: ccp - Add AMD Seamless Firmware Servicing (SFS) driver
crypto: ccp - Add new HV-Fixed page allocation/free API
x86/sev: Add new dump_rmp parameter to snp_leak_pages() API
x86/startup/sev: Document the CPUID flow in the boot #VC handler
objtool: Ignore __pi___cfi_ prefixed symbols
x86/sev: Zap snp_abort()
x86/apic/savic: Do not use snp_abort()
x86/boot: Get rid of the .head.text section
x86/boot: Move startup code out of __head section
efistub/x86: Remap inittext read-execute when needed
x86/boot: Create a confined code area for startup code
x86/kbuild: Incorporate boot/startup/ via Kbuild makefile
x86/boot: Revert "Reject absolute references in .head.text"
x86/boot: Check startup code for absence of absolute relocations
objtool: Add action to check for absence of absolute relocations
x86/sev: Export startup routines for later use
x86/sev: Move __sev_[get|put]_ghcb() into separate noinstr object
x86/sev: Provide PIC aliases for SEV related data objects
x86/boot: Provide PIC aliases for 5-level paging related constants
...
|
|
When compiling with LLVM and CONFIG_RUST is set, there exists the
following objtool warning:
rust/compiler_builtins.o: warning: objtool: __rust__unordsf2(): unexpected end of section .text.unlikely.
objdump shows that the end of section .text.unlikely is an atomic
instruction:
amswap.w $zero, $ra, $zero
According to the LoongArch Reference Manual, if the amswap.w atomic
memory access instruction has the same register number as rd and rj,
the execution will trigger an Instruction Non-defined Exception, so
mark the above instruction as INSN_BUG type to fix the warning.
Cc: stable@vger.kernel.org
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
If the break immediate code is 0, it should mark the type as
INSN_TRAP. If the break immediate code is 1, it should mark the
type as INSN_BUG.
While at it, format the code style and add the code comment for nop.
Cc: stable@vger.kernel.org
Suggested-by: WANG Rui <wangrui@loongson.cn>
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
The x86 startup code must not use absolute references to code or data,
as it executes before the kernel virtual mapping is up.
Add an action to objtool to check all allocatable sections (with the
exception of __patchable_function_entries, which uses absolute
references for nebulous reasons) and raise an error if any absolute
references are found.
Note that debug sections typically contain lots of absolute references
too, but those are not allocatable so they will be ignored.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/20250828102202.1849035-39-ardb+git@google.com
|
|
When compiling with LLVM and CONFIG_LTO_CLANG is set, there exist many
objtool warnings "sibling call from callable instruction with modified
stack frame".
For this special case, the related object file shows that there is no
generated relocation section '.rela.discard.tablejump_annotate' for the
table jump instruction jirl, thus objtool can not know that what is the
actual destination address.
It needs to do something on the LLVM side to make sure that there is the
relocation section '.rela.discard.tablejump_annotate' if LTO is enabled,
but in order to maintain compatibility for the current LLVM compiler,
this can be done in the kernel Makefile for now. Ensure it is aware of
linker with LTO, '--loongarch-annotate-tablejump' needs to be passed via
'-mllvm' to ld.lld.
Before doing the above changes, it should handle the special case of the
relocation section '.rela.discard.tablejump_annotate' to get the correct
table size first, otherwise there are many objtool warnings and errors
if LTO is enabled.
There are many different rodata for each function if LTO is enabled, it
is necessary to enhance get_rodata_table_size_by_table_annotate().
Fixes: b95f852d3af2 ("objtool/LoongArch: Add support for switch table")
Closes: https://lore.kernel.org/loongarch/20250731175655.GA1455142@ax162/
Reported-by: Nathan Chancellor <nathan@kernel.org>
Tested-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
Conflicts:
Documentation/admin-guide/hw-vuln/index.rst
arch/x86/include/asm/cpufeatures.h
arch/x86/kernel/alternative.c
arch/x86/kernel/cpu/bugs.c
arch/x86/kernel/cpu/common.c
drivers/base/cpu.c
include/linux/cpu.h
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
FineIBT-paranoid was using the retpoline bytes for the paranoid check,
disabling retpolines, because all parts that have IBT also have eIBRS
and thus don't need no stinking retpolines.
Except... ITS needs the retpolines for indirect calls must not be in
the first half of a cacheline :-/
So what was the paranoid call sequence:
<fineibt_paranoid_start>:
0: 41 ba 78 56 34 12 mov $0x12345678, %r10d
6: 45 3b 53 f7 cmp -0x9(%r11), %r10d
a: 4d 8d 5b <f0> lea -0x10(%r11), %r11
e: 75 fd jne d <fineibt_paranoid_start+0xd>
10: 41 ff d3 call *%r11
13: 90 nop
Now becomes:
<fineibt_paranoid_start>:
0: 41 ba 78 56 34 12 mov $0x12345678, %r10d
6: 45 3b 53 f7 cmp -0x9(%r11), %r10d
a: 4d 8d 5b f0 lea -0x10(%r11), %r11
e: 2e e8 XX XX XX XX cs call __x86_indirect_paranoid_thunk_r11
Where the paranoid_thunk looks like:
1d: <ea> (bad)
__x86_indirect_paranoid_thunk_r11:
1e: 75 fd jne 1d
__x86_indirect_its_thunk_r11:
20: 41 ff eb jmp *%r11
23: cc int3
[ dhansen: remove initialization to false ]
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Pawan Gupta <pawan.kumar.gupta@linux.intel.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Reviewed-by: Alexandre Chartre <alexandre.chartre@oracle.com>
|
|
Add aliases for all the data objects that the startup code references -
this is needed so that this code can be moved into its own confined area
where it can only access symbols that have a __pi_ prefix.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: David Woodhouse <dwmw@amazon.co.uk>
Cc: Dionna Amalie Glaze <dionnaglaze@google.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Kevin Loughlin <kevinloughlin@google.com>
Cc: Len Brown <len.brown@intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: linux-efi@vger.kernel.org
Link: https://lore.kernel.org/r/20250504095230.2932860-39-ardb+git@google.com
|
|
There's no need to try to automatically disable unreachable warnings if
they've already been manually disabled due to CONFIG_KCOV quirks.
This avoids a spurious warning with a KCOV kernel:
fs/smb/client/cifs_unicode.o: warning: objtool: cifsConvertToUTF16.part.0+0xce5: ignoring unreachables due to jump table quirk
Fixes: eeff7ac61526 ("objtool: Warn when disabling unreachable warnings")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/5eb28eeb6a724b7d945a961cfdcf8d41e6edf3dc.1744238814.git.jpoimboe@kernel.org
Closes: https://lore.kernel.org/r/202504090910.QkvTAR36-lkp@intel.com/
|
|
INSN_CONTEXT_SWITCH is ambiguous. It can represent both call semantics
(SYSCALL, SYSENTER) and return semantics (SYSRET, IRET, RETS, RETU).
Those differ significantly: calls preserve control flow whereas returns
terminate it.
Objtool uses an arbitrary rule for INSN_CONTEXT_SWITCH that almost works
by accident: if in a function, keep going; otherwise stop. It should
instead be based on the semantics of the underlying instruction.
In preparation for improving that, split INSN_CONTEXT_SWITCH into
INSN_SYCALL and INSN_SYSRET.
No functional change.
Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: https://lore.kernel.org/r/19a76c74d2c051d3bc9a775823cafc65ad267a7a.1744095216.git.jpoimboe@kernel.org
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull objtool fixes from Ingo Molnar:
"These are objtool fixes and updates by Josh Poimboeuf, centered around
the fallout from the new CONFIG_OBJTOOL_WERROR=y feature, which,
despite its default-off nature, increased the profile/impact of
objtool warnings:
- Improve error handling and the presentation of warnings/errors
- Revert the new summary warning line that some test-bot tools
interpreted as new regressions
- Fix a number of objtool warnings in various drivers, core kernel
code and architecture code. About half of them are potential
problems related to out-of-bounds accesses or potential undefined
behavior, the other half are additional objtool annotations
- Update objtool to latest (known) compiler quirks and objtool bugs
triggered by compiler code generation
- Misc fixes"
* tag 'objtool-urgent-2025-04-01' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (36 commits)
objtool/loongarch: Add unwind hints in prepare_frametrace()
rcu-tasks: Always inline rcu_irq_work_resched()
context_tracking: Always inline ct_{nmi,irq}_{enter,exit}()
sched/smt: Always inline sched_smt_active()
objtool: Fix verbose disassembly if CROSS_COMPILE isn't set
objtool: Change "warning:" to "error: " for fatal errors
objtool: Always fail on fatal errors
Revert "objtool: Increase per-function WARN_FUNC() rate limit"
objtool: Append "()" to function name in "unexpected end of section" warning
objtool: Ignore end-of-section jumps for KCOV/GCOV
objtool: Silence more KCOV warnings, part 2
objtool, drm/vmwgfx: Don't ignore vmw_send_msg() for ORC
objtool: Fix STACK_FRAME_NON_STANDARD for cold subfunctions
objtool: Fix segfault in ignore_unreachable_insn()
objtool: Fix NULL printf() '%s' argument in builtin-check.c:save_argv()
objtool, lkdtm: Obfuscate the do_nothing() pointer
objtool, regulator: rk808: Remove potential undefined behavior in rk806_set_mode_dcdc()
objtool, ASoC: codecs: wcd934x: Remove potential undefined behavior in wcd934x_slim_irq_handler()
objtool, Input: cyapa - Remove undefined behavior in cyapa_update_fw_store()
objtool, panic: Disable SMAP in __stack_chk_fail()
...
|
|
This is similar to GCC's behavior and makes it more obvious why the
build failed.
Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: https://lore.kernel.org/r/0ea76f4b0e7a370711ed9f75fd0792bb5979c2bf.1743481539.git.jpoimboe@kernel.org
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc updates from Madhavan Srinivasan:
- Remove support for IBM Cell Blades
- SMP support for microwatt platform
- Support for inline static calls on PPC32
- Enable pmu selftests for power11 platform
- Enable hardware trace macro (HTM) hcall support
- Support for limited address mode capability
- Changes to RMA size from 512 MB to 768 MB to handle fadump
- Misc fixes and cleanups
Thanks to Abhishek Dubey, Amit Machhiwal, Andreas Schwab, Arnd Bergmann,
Athira Rajeev, Avnish Chouhan, Christophe Leroy, Disha Goel, Donet Tom,
Gaurav Batra, Gautam Menghani, Hari Bathini, Kajol Jain, Kees Cook,
Mahesh Salgaonkar, Michael Ellerman, Paul Mackerras, Ritesh Harjani
(IBM), Sathvika Vasireddy, Segher Boessenkool, Sourabh Jain, Vaibhav
Jain, and Venkat Rao Bagalkote.
* tag 'powerpc-6.15-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (61 commits)
powerpc/kexec: fix physical address calculation in clear_utlb_entry()
crypto: powerpc: Mark ghashp8-ppc.o as an OBJECT_FILES_NON_STANDARD
powerpc: Fix 'intra_function_call not a direct call' warning
powerpc/perf: Fix ref-counting on the PMU 'vpa_pmu'
KVM: PPC: Enable CAP_SPAPR_TCE_VFIO on pSeries KVM guests
powerpc/prom_init: Fixup missing #size-cells on PowerBook6,7
powerpc/microwatt: Add SMP support
powerpc: Define config option for processors with broadcast TLBIE
powerpc/microwatt: Define an idle power-save function
powerpc/microwatt: Device-tree updates
powerpc/microwatt: Select COMMON_CLK in order to get the clock framework
net: toshiba: Remove reference to PPC_IBM_CELL_BLADE
net: spider_net: Remove powerpc Cell driver
cpufreq: ppc_cbe: Remove powerpc Cell driver
genirq: Remove IRQ_EDGE_EOI_HANDLER
docs: Remove reference to removed CBE_CPUFREQ_SPU_GOVERNOR
powerpc: Remove UDBG_RTAS_CONSOLE
powerpc/io: Use standard barrier macros in io.c
powerpc/io: Rename _insw_ns() etc.
powerpc/io: Use generic raw accessors
...
|
|
For X86_FEATURE_SMAP alternatives which replace NOP with STAC or CLAC,
uaccess validation skips the NOP branch to avoid following impossible
code paths, e.g. where a STAC would be patched but a CLAC wouldn't.
However, it's not safe to assume an X86_FEATURE_SMAP alternative is
patching STAC/CLAC. There can be other alternatives, like
static_cpu_has(), where both branches need to be validated.
Fix that by repurposing ANNOTATE_IGNORE_ALTERNATIVE for skipping either
original instructions or new ones. This is a more generic approach
which enables the removal of the feature checking hacks and the
insn->ignore bit.
Fixes the following warnings:
arch/x86/mm/fault.o: warning: objtool: do_user_addr_fault+0x8ec: __stack_chk_fail() missing __noreturn in .c/.h or NORETURN() in noreturns.h
arch/x86/mm/fault.o: warning: objtool: do_user_addr_fault+0x8f1: unreachable instruction
[ mingo: Fix up conflicts with recent x86 changes. ]
Fixes: ea24213d8088 ("objtool: Add UACCESS validation")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: https://lore.kernel.org/r/de0621ca242130156a55d5d74fed86994dfa4c9c.1742852846.git.jpoimboe@kernel.org
Closes: https://lore.kernel.org/oe-kbuild-all/202503181736.zkZUBv4N-lkp@intel.com/
|
|
Print a warning when disabling the unreachable warnings (due to a GCC
bug). This will help determine if recent GCCs still have the issue and
alert us if any other issues might be silently lurking behind the
unreachable disablement.
Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: https://lore.kernel.org/r/df243063787596e6031367e6659e7e43409d6c6d.1742852846.git.jpoimboe@kernel.org
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull core x86 updates from Ingo Molnar:
"x86 CPU features support:
- Generate the <asm/cpufeaturemasks.h> header based on build config
(H. Peter Anvin, Xin Li)
- x86 CPUID parsing updates and fixes (Ahmed S. Darwish)
- Introduce the 'setcpuid=' boot parameter (Brendan Jackman)
- Enable modifying CPU bug flags with '{clear,set}puid=' (Brendan
Jackman)
- Utilize CPU-type for CPU matching (Pawan Gupta)
- Warn about unmet CPU feature dependencies (Sohil Mehta)
- Prepare for new Intel Family numbers (Sohil Mehta)
Percpu code:
- Standardize & reorganize the x86 percpu layout and related cleanups
(Brian Gerst)
- Convert the stackprotector canary to a regular percpu variable
(Brian Gerst)
- Add a percpu subsection for cache hot data (Brian Gerst)
- Unify __pcpu_op{1,2}_N() macros to __pcpu_op_N() (Uros Bizjak)
- Construct __percpu_seg_override from __percpu_seg (Uros Bizjak)
MM:
- Add support for broadcast TLB invalidation using AMD's INVLPGB
instruction (Rik van Riel)
- Rework ROX cache to avoid writable copy (Mike Rapoport)
- PAT: restore large ROX pages after fragmentation (Kirill A.
Shutemov, Mike Rapoport)
- Make memremap(MEMREMAP_WB) map memory as encrypted by default
(Kirill A. Shutemov)
- Robustify page table initialization (Kirill A. Shutemov)
- Fix flush_tlb_range() when used for zapping normal PMDs (Jann Horn)
- Clear _PAGE_DIRTY for kernel mappings when we clear _PAGE_RW
(Matthew Wilcox)
KASLR:
- x86/kaslr: Reduce KASLR entropy on most x86 systems, to support PCI
BAR space beyond the 10TiB region (CONFIG_PCI_P2PDMA=y) (Balbir
Singh)
CPU bugs:
- Implement FineIBT-BHI mitigation (Peter Zijlstra)
- speculation: Simplify and make CALL_NOSPEC consistent (Pawan Gupta)
- speculation: Add a conditional CS prefix to CALL_NOSPEC (Pawan
Gupta)
- RFDS: Exclude P-only parts from the RFDS affected list (Pawan
Gupta)
System calls:
- Break up entry/common.c (Brian Gerst)
- Move sysctls into arch/x86 (Joel Granados)
Intel LAM support updates: (Maciej Wieczor-Retman)
- selftests/lam: Move cpu_has_la57() to use cpuinfo flag
- selftests/lam: Skip test if LAM is disabled
- selftests/lam: Test get_user() LAM pointer handling
AMD SMN access updates:
- Add SMN offsets to exclusive region access (Mario Limonciello)
- Add support for debugfs access to SMN registers (Mario Limonciello)
- Have HSMP use SMN through AMD_NODE (Yazen Ghannam)
Power management updates: (Patryk Wlazlyn)
- Allow calling mwait_play_dead with an arbitrary hint
- ACPI/processor_idle: Add FFH state handling
- intel_idle: Provide the default enter_dead() handler
- Eliminate mwait_play_dead_cpuid_hint()
Build system:
- Raise the minimum GCC version to 8.1 (Brian Gerst)
- Raise the minimum LLVM version to 15.0.0 (Nathan Chancellor)
Kconfig: (Arnd Bergmann)
- Add cmpxchg8b support back to Geode CPUs
- Drop 32-bit "bigsmp" machine support
- Rework CONFIG_GENERIC_CPU compiler flags
- Drop configuration options for early 64-bit CPUs
- Remove CONFIG_HIGHMEM64G support
- Drop CONFIG_SWIOTLB for PAE
- Drop support for CONFIG_HIGHPTE
- Document CONFIG_X86_INTEL_MID as 64-bit-only
- Remove old STA2x11 support
- Only allow CONFIG_EISA for 32-bit
Headers:
- Replace __ASSEMBLY__ with __ASSEMBLER__ in UAPI and non-UAPI
headers (Thomas Huth)
Assembly code & machine code patching:
- x86/alternatives: Simplify alternative_call() interface (Josh
Poimboeuf)
- x86/alternatives: Simplify callthunk patching (Peter Zijlstra)
- KVM: VMX: Use named operands in inline asm (Josh Poimboeuf)
- x86/hyperv: Use named operands in inline asm (Josh Poimboeuf)
- x86/traps: Cleanup and robustify decode_bug() (Peter Zijlstra)
- x86/kexec: Merge x86_32 and x86_64 code using macros from
<asm/asm.h> (Uros Bizjak)
- Use named operands in inline asm (Uros Bizjak)
- Improve performance by using asm_inline() for atomic locking
instructions (Uros Bizjak)
Earlyprintk:
- Harden early_serial (Peter Zijlstra)
NMI handler:
- Add an emergency handler in nmi_desc & use it in
nmi_shootdown_cpus() (Waiman Long)
Miscellaneous fixes and cleanups:
- by Ahmed S. Darwish, Andy Shevchenko, Ard Biesheuvel, Artem
Bityutskiy, Borislav Petkov, Brendan Jackman, Brian Gerst, Dan
Carpenter, Dr. David Alan Gilbert, H. Peter Anvin, Ingo Molnar,
Josh Poimboeuf, Kevin Brodsky, Mike Rapoport, Lukas Bulwahn, Maciej
Wieczor-Retman, Max Grobecker, Patryk Wlazlyn, Pawan Gupta, Peter
Zijlstra, Philip Redkin, Qasim Ijaz, Rik van Riel, Thomas Gleixner,
Thorsten Blum, Tom Lendacky, Tony Luck, Uros Bizjak, Vitaly
Kuznetsov, Xin Li, liuye"
* tag 'x86-core-2025-03-22' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (211 commits)
zstd: Increase DYNAMIC_BMI2 GCC version cutoff from 4.8 to 11.0 to work around compiler segfault
x86/asm: Make asm export of __ref_stack_chk_guard unconditional
x86/mm: Only do broadcast flush from reclaim if pages were unmapped
perf/x86/intel, x86/cpu: Replace Pentium 4 model checks with VFM ones
perf/x86/intel, x86/cpu: Simplify Intel PMU initialization
x86/headers: Replace __ASSEMBLY__ with __ASSEMBLER__ in non-UAPI headers
x86/headers: Replace __ASSEMBLY__ with __ASSEMBLER__ in UAPI headers
x86/locking/atomic: Improve performance by using asm_inline() for atomic locking instructions
x86/asm: Use asm_inline() instead of asm() in clwb()
x86/asm: Use CLFLUSHOPT and CLWB mnemonics in <asm/special_insns.h>
x86/hweight: Use asm_inline() instead of asm()
x86/hweight: Use ASM_CALL_CONSTRAINT in inline asm()
x86/hweight: Use named operands in inline asm()
x86/stackprotector/64: Only export __ref_stack_chk_guard on CONFIG_SMP
x86/head/64: Avoid Clang < 17 stack protector in startup code
x86/kexec: Merge x86_32 and x86_64 code using macros from <asm/asm.h>
x86/runtime-const: Add the RUNTIME_CONST_PTR assembly macro
x86/cpu/intel: Limit the non-architectural constant_tsc model checks
x86/mm/pat: Replace Intel x86_model checks with VFM ones
x86/cpu/intel: Fix fast string initialization for extended Families
...
|
|
The objtool program need to analysis the control flow of each object file
generated by compiler toolchain, it needs to know all the locations that
a branch instruction may jump into, if a jump table is used, objtool has
to correlate the jump instruction with the table.
On x86 (which is the only port supported by objtool before LoongArch),
there is a relocation type on the jump instruction and directly points
to the table. But on LoongArch, the relocation is on another kind of
instruction prior to the jump instruction, and also with scheduling it
is not very easy to tell the offset of that instruction from the jump
instruction. Furthermore, because LoongArch has -fsection-anchors (often
enabled at -O1 or above) the relocation may actually points to a section
anchor instead of the table itself.
For the jump table of switch cases, a GCC patch "LoongArch: Add support
to annotate tablejump" and a Clang patch "[LoongArch] Add options for
annotate tablejump" have been merged into the upstream mainline, it can
parse the additional section ".discard.tablejump_annotate" which stores
the jump info as pairs of addresses, each pair contains the address of
jump instruction and the address of jump table.
For the jump table of computed gotos, it is indeed not easy to implement
in the compiler, especially if there is more than one computed goto in a
function such as ___bpf_prog_run(). objdump kernel/bpf/core.o shows that
there are many table jump instructions in ___bpf_prog_run(), but there are
no relocations on the table jump instructions and to the table directly on
LoongArch.
Without the help of compiler, in order to figure out the address of goto
table for the special case of ___bpf_prog_run(), since the instruction
sequence is relatively single and stable, it makes sense to add a helper
find_reloc_of_rodata_c_jump_table() to find the relocation which points
to the section ".rodata..c_jump_table".
If find_reloc_by_table_annotate() failed, it means there is no relocation
info of switch table address in ".rela.discard.tablejump_annotate", then
objtool may find the relocation info of goto table ".rodata..c_jump_table"
with find_reloc_of_rodata_c_jump_table().
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Link: https://lore.kernel.org/r/20250211115016.26913-6-yangtiezhu@loongson.cn
Acked-by: Huacai Chen <chenhuacai@loongson.cn>
Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
|
|
The objtool program need to analysis the control flow of each object file
generated by compiler toolchain, it needs to know all the locations that
a branch instruction may jump into, if a jump table is used, objtool has
to correlate the jump instruction with the table.
On x86 (which is the only port supported by objtool before LoongArch),
there is a relocation type on the jump instruction and directly points
to the table. But on LoongArch, the relocation is on another kind of
instruction prior to the jump instruction, and also with scheduling it
is not very easy to tell the offset of that instruction from the jump
instruction. Furthermore, because LoongArch has -fsection-anchors (often
enabled at -O1 or above) the relocation may actually points to a section
anchor instead of the table itself.
The good news is that after continuous analysis and discussion, at last
a GCC patch "LoongArch: Add support to annotate tablejump" and a Clang
patch "[LoongArch] Add options for annotate tablejump" have been merged
into the upstream mainline, the compiler changes make life much easier
for switch table support of objtool on LoongArch.
By now, there is an additional section ".discard.tablejump_annotate" to
store the jump info as pairs of addresses, each pair contains the address
of jump instruction and the address of jump table.
In order to find switch table, it is easy to parse the relocation section
".rela.discard.tablejump_annotate" to get table_sec and table_offset, the
rest process is somehow like x86.
Additionally, it needs to get each table size. When compiling on LoongArch,
there are unsorted table offsets of rodata if there exist many jump tables,
it will get the wrong table end and find the wrong table jump destination
instructions in add_jump_table().
Sort the rodata table offset by parsing ".rela.discard.tablejump_annotate"
and then get each table size of rodata corresponded with each table jump
instruction, it is used to check the table end and will break the process
when parsing ".rela.rodata" to avoid getting the wrong jump destination
instructions.
Link: https://gcc.gnu.org/git/?p=gcc.git;a=commit;h=0ee028f55640
Link: https://github.com/llvm/llvm-project/commit/4c2c17756739
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Link: https://lore.kernel.org/r/20250211115016.26913-5-yangtiezhu@loongson.cn
Acked-by: Huacai Chen <chenhuacai@loongson.cn>
Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
|
|
For the most part, an absolute relocation type is used for rodata.
In the case of STT_SECTION, reloc->sym->offset is always zero, for
the other symbol types, reloc_addend(reloc) is always zero, thus it
can use a simple statement "reloc->sym->offset + reloc_addend(reloc)"
to obtain the symbol offset for various symbol types.
When compiling on LoongArch, there exist PC relative relocation types
for rodata, it needs to calculate the symbol offset with "S + A - PC"
according to the spec of "ELF for the LoongArch Architecture".
If there is only one jump table in the rodata, the "PC" is the entry
address which is equal with the value of reloc_offset(reloc), at this
time, reloc_offset(table) is 0.
If there are many jump tables in the rodata, the "PC" is the offset
of the jump table's base address which is equal with the value of
reloc_offset(reloc) - reloc_offset(table).
So for LoongArch, if the relocation type is PC relative, it can use a
statement "reloc_offset(reloc) - reloc_offset(table)" to get the "PC"
value when calculating the symbol offset with "S + A - PC" for one or
many jump tables in the rodata.
Add an arch-specific function arch_jump_table_sym_offset() to assign
the symbol offset, for the most part that is an absolute relocation,
the default value is "reloc->sym->offset + reloc_addend(reloc)" in
the weak definition, it can be overridden by each architecture that
has different requirements.
Link: https://github.com/loongson/la-abi-specs/blob/release/laelf.adoc
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Link: https://lore.kernel.org/r/20250211115016.26913-4-yangtiezhu@loongson.cn
Acked-by: Huacai Chen <chenhuacai@loongson.cn>
Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
|
|
In the most cases, the entry size of rodata is 8 bytes because the
relocation type is 64 bit. There are also 32 bit relocation types,
the entry size of rodata should be 4 bytes in this case.
Add an arch-specific function arch_reloc_size() to assign the entry
size of rodata for x86, powerpc and LoongArch.
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Link: https://lore.kernel.org/r/20250211115016.26913-3-yangtiezhu@loongson.cn
Acked-by: Huacai Chen <chenhuacai@loongson.cn>
Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
|
|
Add support for 'bla' instruction.
This is done by 'flagging' the address as an absolute address so that
arch_jump_destination() can calculate it as expected. Because code is
_always_ 4 bytes aligned, use bit 30 as flag.
Also add support for 'b' and 'ba' instructions. Objtool call them jumps.
And make sure the special 'bl .+4' used by clang in relocatable code is
not seen as an 'unannotated intra-function call'. clang should use the
special 'bcl 20,31,.+4' form like gcc but for the time being it does not
so lets work around that.
Link: https://github.com/llvm/llvm-project/issues/128644
Reviewed-by: Segher Boessenkool <segher@kewrnel.crashing.org>
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Link: https://patch.msgid.link/bf0b4d554547bc34fa3d1af5b4e62a84c0bc182b.1740470510.git.christophe.leroy@csgroup.eu
|
|
Now that paravirt call patching is implemented using alternatives, it
is possible to avoid having to patch the alternative sites by
including the altinstr_replacement calls in the call_sites list.
This means we're now stacking relative adjustments like so:
callthunks_patch_builtin_calls():
patches all function calls to target: func() -> func()-10
since the CALL accounting lives in the CALL_PADDING.
This explicitly includes .altinstr_replacement
alt_replace_call():
patches: x86_BUG() -> target()
this patching is done in a relative manner, and will preserve
the above adjustment, meaning that with calldepth patching it
will do: x86_BUG()-10 -> target()-10
apply_relocation():
does code relocation, and adjusts all RIP-relative instructions
to the new location, also in a relative manner.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Sami Tolvanen <samitolvanen@google.com>
Link: https://lore.kernel.org/r/20250207122546.617187089@infradead.org
|
|
In preparation for adding support for annotated jump tables, where
ELF relocations and symbols are used to describe the locations of jump
tables in the executable, refactor the jump table discovery logic so the
table size can be returned from arch_find_switch_table().
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20241011170847.334429-12-ardb+git@google.com
|
|
When kernel IBT is enabled, objtool detects all text references in order
to determine which functions can be indirectly branched to.
In text, such references look like one of the following:
mov $0x0,%rax R_X86_64_32S .init.text+0x7e0a0
lea 0x0(%rip),%rax R_X86_64_PC32 autoremove_wake_function-0x4
Either way the function pointer is denoted by a relocation, so objtool
just reads that.
However there are some "lea xxx(%rip)" cases which don't use relocations
because they're referencing code in the same translation unit. Objtool
doesn't have visibility to those.
The only currently known instances of that are a few hand-coded asm text
references which don't actually need ENDBR. So it's not actually a
problem at the moment.
However if we enable -fpie, the compiler would start generating them and
there would definitely be bugs in the IBT sealing.
Detect non-relocated text references and handle them appropriately.
[ Note: I removed the manual static_call_tramp check -- that should
already be handled by the noendbr check. ]
Reported-by: Ard Biesheuvel <ardb@kernel.org>
Tested-by: Ard Biesheuvel <ardb@kernel.org>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
|
|
After commit a0f7085f6a63 ("LoongArch: Add RANDOMIZE_KSTACK_OFFSET
support"), there are three new instructions "addi.d $fp, $sp, 32",
"sub.d $sp, $sp, $t0" and "addi.d $sp, $fp, -32" for the secondary
stack in do_syscall(), then there is a objtool warning "return with
modified stack frame" and no handle_syscall() which is the previous
frame of do_syscall() in the call trace when executing the command
"echo l > /proc/sysrq-trigger".
objdump shows something like this:
0000000000000000 <do_syscall>:
0: 02ff8063 addi.d $sp, $sp, -32
4: 29c04076 st.d $fp, $sp, 16
8: 29c02077 st.d $s0, $sp, 8
c: 29c06061 st.d $ra, $sp, 24
10: 02c08076 addi.d $fp, $sp, 32
...
74: 0011b063 sub.d $sp, $sp, $t0
...
a8: 4c000181 jirl $ra, $t0, 0
...
dc: 02ff82c3 addi.d $sp, $fp, -32
e0: 28c06061 ld.d $ra, $sp, 24
e4: 28c04076 ld.d $fp, $sp, 16
e8: 28c02077 ld.d $s0, $sp, 8
ec: 02c08063 addi.d $sp, $sp, 32
f0: 4c000020 jirl $zero, $ra, 0
The instruction "sub.d $sp, $sp, $t0" changes the stack bottom and the
new stack size is a random value, in order to find the return address of
do_syscall() which is stored in the original stack frame after executing
"jirl $ra, $t0, 0", it should use fp which points to the original stack
top.
At the beginning, the thought is tended to decode the secondary stack
instruction "sub.d $sp, $sp, $t0" and set it as a label, then check this
label for the two frame pointer instructions to change the cfa base and
cfa offset during the period of secondary stack in update_cfi_state().
This is valid for GCC but invalid for Clang due to there are different
secondary stack instructions for ClangBuiltLinux on LoongArch, something
like this:
0000000000000000 <do_syscall>:
...
88: 00119064 sub.d $a0, $sp, $a0
8c: 00150083 or $sp, $a0, $zero
...
Actually, it equals to a single instruction "sub.d $sp, $sp, $a0", but
there is no proper condition to check it as a label like GCC, and so the
beginning thought is not a good way.
Essentially, there are two special frame pointer instructions which are
"addi.d $fp, $sp, imm" and "addi.d $sp, $fp, imm", the first one points
fp to the original stack top and the second one restores the original
stack bottom from fp.
Based on the above analysis, in order to avoid adding an arch-specific
update_cfi_state(), we just add a member "frame_pointer" in the "struct
symbol" as a label to avoid affecting the current normal case, then set
it as true only if there is "addi.d $sp, $fp, imm". The last is to check
this label for the two frame pointer instructions to change the cfa base
and cfa offset in update_cfi_state().
Tested with the following two configs:
(1) CONFIG_RANDOMIZE_KSTACK_OFFSET=y &&
CONFIG_RANDOMIZE_KSTACK_OFFSET_DEFAULT=n
(2) CONFIG_RANDOMIZE_KSTACK_OFFSET=y &&
CONFIG_RANDOMIZE_KSTACK_OFFSET_DEFAULT=y
By the way, there is no effect for x86 with this patch, tested on the
x86 machine with Fedora 40 system.
Cc: stable@vger.kernel.org # 6.9+
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull objtool updates from Ingo Molnar:
- Fix bug that caused objtool to confuse certain memory ops added by
KASAN instrumentation as stack accesses
- Various faddr2line optimizations
- Improve error messages
* tag 'objtool-core-2024-07-16' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
objtool/x86: objtool can confuse memory and stack access
objtool: Use "action" in error message to be consistent with help
scripts/faddr2line: Check only two symbols when calculating symbol size
scripts/faddr2line: Remove call to addr2line from find_dir_prefix()
scripts/faddr2line: Invoke addr2line as a single long-running process
scripts/faddr2line: Pass --addresses argument to addr2line
scripts/faddr2line: Check vmlinux only once
scripts/faddr2line: Combine three readelf calls into one
scripts/faddr2line: Reduce number of readelf calls to three
|
|
The encoding of an x86 instruction can include a ModR/M and a SIB
(Scale-Index-Base) byte to describe the addressing mode of the
instruction.
objtool processes all addressing mode with a SIB base of 5 as having
%rbp as the base register. However, a SIB base of 5 means that the
effective address has either no base (if ModR/M mod is zero) or %rbp
as the base (if ModR/M mod is 1 or 2). This can cause objtool to confuse
an absolute address access with a stack operation.
For example, objtool will see the following instruction:
4c 8b 24 25 e0 ff ff mov 0xffffffffffffffe0,%r12
as a stack operation (i.e. similar to: mov -0x20(%rbp), %r12).
[Note that this kind of weird absolute address access is added by the
compiler when using KASAN.]
If this perceived stack operation happens to reference the location
where %r12 was pushed on the stack then the objtool validation will
think that %r12 is being restored and this can cause a stack state
mismatch.
This kind behavior was seen on xfs code, after a minor change (convert
kmem_alloc() to kmalloc()):
>> fs/xfs/xfs.o: warning: objtool: xfs_da_grow_inode_int+0x6c1: stack state mismatch: reg1[12]=-2-48 reg2[12]=-1+0
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202402220435.MGN0EV6l-lkp@intel.com/
Signed-off-by: Alexandre Chartre <alexandre.chartre@oracle.com>
Link: https://lore.kernel.org/r/20240620144747.2524805-1-alexandre.chartre@oracle.com
Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
|
|
Instead of making increasingly complicated ALTERNATIVE_n()
implementations, use a nested alternative expression.
The only difference between:
ALTERNATIVE_2(oldinst, newinst1, flag1, newinst2, flag2)
and
ALTERNATIVE(ALTERNATIVE(oldinst, newinst1, flag1),
newinst2, flag2)
is that the outer alternative can add additional padding when the inner
alternative is the shorter one, which then results in
alt_instr::instrlen being inconsistent.
However, this is easily remedied since the alt_instr entries will be
consecutive and it is trivial to compute the max(alt_instr::instrlen) at
runtime while patching.
Specifically, after this the ALTERNATIVE_2 macro, after CPP expansion
(and manual layout), looks like this:
.macro ALTERNATIVE_2 oldinstr, newinstr1, ft_flags1, newinstr2, ft_flags2
740:
740: \oldinstr ;
741: .skip -(((744f-743f)-(741b-740b)) > 0) * ((744f-743f)-(741b-740b)),0x90 ;
742: .pushsection .altinstructions,"a" ;
altinstr_entry 740b,743f,\ft_flags1,742b-740b,744f-743f ;
.popsection ;
.pushsection .altinstr_replacement,"ax" ;
743: \newinstr1 ;
744: .popsection ; ;
741: .skip -(((744f-743f)-(741b-740b)) > 0) * ((744f-743f)-(741b-740b)),0x90 ;
742: .pushsection .altinstructions,"a" ;
altinstr_entry 740b,743f,\ft_flags2,742b-740b,744f-743f ;
.popsection ;
.pushsection .altinstr_replacement,"ax" ;
743: \newinstr2 ;
744: .popsection ;
.endm
The only label that is ambiguous is 740, however they all reference the
same spot, so that doesn't matter.
NOTE: obviously only @oldinstr may be an alternative; making @newinstr
an alternative would mean patching .altinstr_replacement which very
likely isn't what is intended, also the labels will be confused in that
case.
[ bp: Debug an issue where it would match the wrong two insns and
and consider them nested due to the same signed offsets in the
.alternative section and use instr_va() to compare the full virtual
addresses instead.
- Use new labels to denote that the new, nested
alternatives are being used when staring at preprocessed output.
- Use the %c constraint everywhere instead of %P and document the
difference for future reference. ]
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Co-developed-by: Borislav Petkov (AMD) <bp@alien8.de>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20230628104952.GA2439977@hirez.programming.kicks-ass.net
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson
Pull LoongArch updates from Huacai Chen:
- Add objtool support for LoongArch
- Add ORC stack unwinder support for LoongArch
- Add kernel livepatching support for LoongArch
- Select ARCH_HAS_CURRENT_STACK_POINTER in Kconfig
- Select HAVE_ARCH_USERFAULTFD_MINOR in Kconfig
- Some bug fixes and other small changes
* tag 'loongarch-6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson:
LoongArch/crypto: Clean up useless assignment operations
LoongArch: Define the __io_aw() hook as mmiowb()
LoongArch: Remove superfluous flush_dcache_page() definition
LoongArch: Move {dmw,tlb}_virt_to_page() definition to page.h
LoongArch: Change __my_cpu_offset definition to avoid mis-optimization
LoongArch: Select HAVE_ARCH_USERFAULTFD_MINOR in Kconfig
LoongArch: Select ARCH_HAS_CURRENT_STACK_POINTER in Kconfig
LoongArch: Add kernel livepatching support
LoongArch: Add ORC stack unwinder support
objtool: Check local label in read_unwind_hints()
objtool: Check local label in add_dead_ends()
objtool/LoongArch: Enable orc to be built
objtool/x86: Separate arch-specific and generic parts
objtool/LoongArch: Implement instruction decoder
objtool/LoongArch: Enable objtool to be built
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull core x86 updates from Ingo Molnar:
- The biggest change is the rework of the percpu code, to support the
'Named Address Spaces' GCC feature, by Uros Bizjak:
- This allows C code to access GS and FS segment relative memory
via variables declared with such attributes, which allows the
compiler to better optimize those accesses than the previous
inline assembly code.
- The series also includes a number of micro-optimizations for
various percpu access methods, plus a number of cleanups of %gs
accesses in assembly code.
- These changes have been exposed to linux-next testing for the
last ~5 months, with no known regressions in this area.
- Fix/clean up __switch_to()'s broken but accidentally working handling
of FPU switching - which also generates better code
- Propagate more RIP-relative addressing in assembly code, to generate
slightly better code
- Rework the CPU mitigations Kconfig space to be less idiosyncratic, to
make it easier for distros to follow & maintain these options
- Rework the x86 idle code to cure RCU violations and to clean up the
logic
- Clean up the vDSO Makefile logic
- Misc cleanups and fixes
* tag 'x86-core-2024-03-11' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (52 commits)
x86/idle: Select idle routine only once
x86/idle: Let prefer_mwait_c1_over_halt() return bool
x86/idle: Cleanup idle_setup()
x86/idle: Clean up idle selection
x86/idle: Sanitize X86_BUG_AMD_E400 handling
sched/idle: Conditionally handle tick broadcast in default_idle_call()
x86: Increase brk randomness entropy for 64-bit systems
x86/vdso: Move vDSO to mmap region
x86/vdso/kbuild: Group non-standard build attributes and primary object file rules together
x86/vdso: Fix rethunk patching for vdso-image-{32,64}.o
x86/retpoline: Ensure default return thunk isn't used at runtime
x86/vdso: Use CONFIG_COMPAT_32 to specify vdso32
x86/vdso: Use $(addprefix ) instead of $(foreach )
x86/vdso: Simplify obj-y addition
x86/vdso: Consolidate targets and clean-files
x86/bugs: Rename CONFIG_RETHUNK => CONFIG_MITIGATION_RETHUNK
x86/bugs: Rename CONFIG_CPU_SRSO => CONFIG_MITIGATION_SRSO
x86/bugs: Rename CONFIG_CPU_IBRS_ENTRY => CONFIG_MITIGATION_IBRS_ENTRY
x86/bugs: Rename CONFIG_CPU_UNRET_ENTRY => CONFIG_MITIGATION_UNRET_ENTRY
x86/bugs: Rename CONFIG_SLS => CONFIG_MITIGATION_SLS
...
|
|
Implement arch-specific init_orc_entry(), write_orc_entry(), reg_name(),
orc_type_name(), print_reg() and orc_print_dump(), then set BUILD_ORC as
y to build the orc related files.
Co-developed-by: Jinyang He <hejinyang@loongson.cn>
Signed-off-by: Jinyang He <hejinyang@loongson.cn>
Co-developed-by: Youling Tang <tangyouling@loongson.cn>
Signed-off-by: Youling Tang <tangyouling@loongson.cn>
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
Move init_orc_entry(), write_orc_entry(), reg_name(), orc_type_name()
and print_reg() from generic orc_gen.c and orc_dump.c to arch-specific
orc.c, then introduce a new function orc_print_dump() to print info.
This is preparation for later patch, no functionality change.
Co-developed-by: Jinyang He <hejinyang@loongson.cn>
Signed-off-by: Jinyang He <hejinyang@loongson.cn>
Co-developed-by: Youling Tang <tangyouling@loongson.cn>
Signed-off-by: Youling Tang <tangyouling@loongson.cn>
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
Only copy the minimal definitions of instruction opcodes and formats
in inst.h from arch/loongarch to tools/arch/loongarch, and also copy
the definition of sign_extend64() to tools/include/linux/bitops.h to
decode the following kinds of instructions:
(1) stack pointer related instructions
addi.d, ld.d, st.d, ldptr.d and stptr.d
(2) branch and jump related instructions
beq, bne, blt, bge, bltu, bgeu, beqz, bnez, bceqz, bcnez, b, bl and jirl
(3) other instructions
break, nop and ertn
See more info about instructions in LoongArch Reference Manual:
https://loongson.github.io/LoongArch-Documentation/LoongArch-Vol1-EN.html
Co-developed-by: Jinyang He <hejinyang@loongson.cn>
Signed-off-by: Jinyang He <hejinyang@loongson.cn>
Co-developed-by: Youling Tang <tangyouling@loongson.cn>
Signed-off-by: Youling Tang <tangyouling@loongson.cn>
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
Add the minimal changes to enable objtool build on LoongArch,
most of the functions are stubs to only fix the build errors
when make -C tools/objtool.
This is similar with commit e52ec98c5ab1 ("objtool/powerpc:
Enable objtool to be built on ppc").
Co-developed-by: Jinyang He <hejinyang@loongson.cn>
Signed-off-by: Jinyang He <hejinyang@loongson.cn>
Co-developed-by: Youling Tang <tangyouling@loongson.cn>
Signed-off-by: Youling Tang <tangyouling@loongson.cn>
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
Update the objtool decoder to know about the ERET[US] instructions
(type INSN_CONTEXT_SWITCH).
Signed-off-by: H. Peter Anvin (Intel) <hpa@zytor.com>
Signed-off-by: Xin Li <xin3.li@intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Tested-by: Shan Kang <shan.kang@intel.com>
Link: https://lore.kernel.org/r/20231205105030.8698-11-xin3.li@intel.com
|
|
Step 5/10 of the namespace unification of CPU mitigations related Kconfig options.
[ mingo: Converted a few more uses in comments/messages as well. ]
Suggested-by: Josh Poimboeuf <jpoimboe@kernel.org>
Signed-off-by: Breno Leitao <leitao@debian.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Ariel Miculas <amiculas@cisco.com>
Acked-by: Josh Poimboeuf <jpoimboe@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: https://lore.kernel.org/r/20231121160740.1249350-6-leitao@debian.org
|
|
Replace the existing /* fallthrough */ comments with the
new 'fallthrough' pseudo-keyword macro:
https://www.kernel.org/doc/html/v5.7/process/deprecated.html?highlight=fallthrough#implicit-switch-case-fall-through
Signed-off-by: Ruan Jinjie <ruanjinjie@huawei.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: linux-kernel@vger.kernel.org
|
