| Age | Commit message (Collapse) | Author |
|---|
|
https://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD
KVM/arm64 updates for 6.19
- Support for userspace handling of synchronous external aborts (SEAs),
allowing the VMM to potentially handle the abort in a non-fatal
manner.
- Large rework of the VGIC's list register handling with the goal of
supporting more active/pending IRQs than available list registers in
hardware. In addition, the VGIC now supports EOImode==1 style
deactivations for IRQs which may occur on a separate vCPU than the
one that acked the IRQ.
- Support for FEAT_XNX (user / privileged execute permissions) and
FEAT_HAF (hardware update to the Access Flag) in the software page
table walkers and shadow MMU.
- Allow page table destruction to reschedule, fixing long need_resched
latencies observed when destroying a large VM.
- Minor fixes to KVM and selftests
|
|
Add a basic test for AT emulation in the EL2&0 and EL1&0 translation
regimes.
Reviewed-by: Marc Zyngier <maz@kernel.org>
Tested-by: Marc Zyngier <maz@kernel.org>
Link: https://msgid.link/20251124190158.177318-16-oupton@kernel.org
Signed-off-by: Oliver Upton <oupton@kernel.org>
|
|
KVM selftests changes for 6.19:
- Fix a math goof in mmu_stress_test when running on a single-CPU system/VM.
- Forcefully override ARCH from x86_64 to x86 to play nice with specifying
ARCH=x86_64 on the command line.
- Extend a bunch of nested VMX to validate nested SVM as well.
- Add support for LA57 in the core VM_MODE_xxx macro, and add a test to
verify KVM can save/restore nested VMX state when L1 is using 5-level
paging, but L2 is not.
- Clean up the guest paging code in anticipation of sharing the core logic for
nested EPT and nested NPT.
|
|
Call paths leading to __virt_pg_map() are currently:
(a) virt_pg_map() -> virt_arch_pg_map() -> __virt_pg_map()
(b) virt_map_level() -> __virt_pg_map()
For (a), calls to virt_pg_map() from kvm_util.c make sure they update
vm->vpages_mapped, but other callers do not. Move the sparsebit_set()
call into virt_pg_map() to make sure all callers are captured.
For (b), call sparsebit_set_num() from virt_map_level().
It's tempting to have a single the call inside __virt_pg_map(), however:
- The call path in (a) is not x86-specific, while (b) is. Moving the
call into __virt_pg_map() would require doing something similar for
other archs implementing virt_pg_map().
- Future changes will reusue __virt_pg_map() for nested PTEs, which should
not update vm->vpages_mapped, i.e. a triple underscore version that does
not update vm->vpages_mapped would need to be provided.
Signed-off-by: Yosry Ahmed <yosry.ahmed@linux.dev>
Link: https://patch.msgid.link/20251021074736.1324328-12-yosry.ahmed@linux.dev
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
Use 57-bit addresses with 5-level paging on hardware that supports
LA57. Continue to use 48-bit addresses with 4-level paging on hardware
that doesn't support LA57.
Suggested-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Jim Mattson <jmattson@google.com>
Link: https://patch.msgid.link/20251028225827.2269128-4-jmattson@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
Rename "guest_paddr" variables in vm_userspace_mem_region_add() and
vm_mem_add() to KVM's de facto standard "gpa", both for consistency and
to shorten line lengths.
Opportunistically fix the indentation of the
vm_userspace_mem_region_add() declaration.
Link: https://patch.msgid.link/20251007223625.369939-1-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
Add kvm_<sycall> wrappers for munmap(), close(), fallocate(), and
ftruncate() to cut down on boilerplate code when a sycall is expected
to succeed, and to make it easier for developers to remember to assert
success.
Implement and use a macro framework similar to the kernel's SYSCALL_DEFINE
infrastructure to further cut down on boilerplate code, and to drastically
reduce the probability of typos as the kernel's syscall definitions can be
copy+paste almost verbatim.
Provide macros to build the raw <sycall>() wrappers as well, e.g. to
replace hand-coded wrappers (NUMA) or pure open-coded calls.
Reviewed-by: Ackerley Tng <ackerleytng@google.com>
Tested-by: Ackerley Tng <ackerleytng@google.com>
Reviewed-by: Shivank Garg <shivankg@amd.com>
Tested-by: Shivank Garg <shivankg@amd.com>
Link: https://lore.kernel.org/r/20251016172853.52451-7-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
KVM x86 fixes for 6.18:
- Expand the KVM_PRE_FAULT_MEMORY selftest to add a regression test for the
bug fixed by commit 3ccbf6f47098 ("KVM: x86/mmu: Return -EAGAIN if userspace
deletes/moves memslot during prefault")
- Don't try to get PMU capabbilities from perf when running a CPU with hybrid
CPUs/PMUs, as perf will rightly WARN.
- Rework KVM_CAP_GUEST_MEMFD_MMAP (newly introduced in 6.18) into a more
generic KVM_CAP_GUEST_MEMFD_FLAGS
- Add a guest_memfd INIT_SHARED flag and require userspace to explicitly set
said flag to initialize memory as SHARED, irrespective of MMAP. The
behavior merged in 6.18 is that enabling mmap() implicitly initializes
memory as SHARED, which would result in an ABI collision for x86 CoCo VMs
as their memory is currently always initialized PRIVATE.
- Allow mmap() on guest_memfd for x86 CoCo VMs, i.e. on VMs with private
memory, to enable testing such setups, i.e. to hopefully flush out any
other lurking ABI issues before 6.18 is officially released.
- Add testcases to the guest_memfd selftest to cover guest_memfd without MMAP,
and host userspace accesses to mmap()'d private memory.
|
|
The KVM_IRQFD ioctl fails if no irqchip is present in-kernel, which
isn't too surprising as there's not much KVM can do for an IRQ if it
cannot resolve a destination.
As written the irqfd_test assumes that a 'default' VM created in
selftests has an in-kernel irqchip created implicitly. That may be the
case on x86 but it isn't necessarily true on other architectures.
Add an arch predicate indicating if 'default' VMs get an irqchip and
make the irqfd_test depend on it. Work around arm64 VGIC initialization
requirements by using vm_create_with_one_vcpu(), ignoring the created
vCPU as it isn't used for the test.
Reported-by: Sebastian Ott <sebott@redhat.com>
Reported-by: Naresh Kamboju <naresh.kamboju@linaro.org>
Acked-by: Sean Christopherson <seanjc@google.com>
Fixes: 7e9b231c402a ("KVM: selftests: Add a KVM_IRQFD test to verify uniqueness requirements")
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
Add and use wrappers for mmap() and munmap() that assert success to reduce
a significant amount of boilerplate code, to ensure all tests assert on
failure, and to provide consistent error messages on failure.
No functional change intended.
Reviewed-by: Fuad Tabba <tabba@google.com>
Tested-by: Fuad Tabba <tabba@google.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Ackerley Tng <ackerleytng@google.com>
Link: https://lore.kernel.org/r/20251003232606.4070510-10-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
KVM selftests changes for 6.18
- Add #DE coverage in the fastops test (the only exception that's guest-
triggerable in fastop-emulated instructions).
- Fix PMU selftests errors encountered on Granite Rapids (GNR), Sierra
Forest (SRF) and Clearwater Forest (CWF).
- Minor cleanups and improvements
|
|
FEAT_VHE has the somewhat nice property of implicitly redirecting EL1
register aliases to their corresponding EL2 representations when E2H=1.
Unfortunately, there's no such abstraction for userspace and EL2
registers are always accessed by their canonical encoding.
Introduce a helper that applies EL2 redirections to sysregs and use
aggressive inlining to catch misuse at compile time. Go a little past
the architectural definition for ease of use for test authors (e.g. the
stack pointer).
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
Start creating a VGICv3 by default unless explicitly opted-out by the
test. While having an interrupt controller is nice, the real benefit
here is clearing a hurdle for EL2 VMs which mandate the presence of a
VGIC.
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
Move the x86 specific helpers for getting kvm_{amd,intel} module params to
x86 where they belong. Expose the module-agnostic helpers globally, there
is nothing secret about the logic.
Link: https://lore.kernel.org/r/20250806225159.1687326-1-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
KVM selftests changes for 6.17
- Fix a comment typo.
- Verify KVM is loaded when getting any KVM module param so that attempting to
run a selftest without kvm.ko loaded results in a SKIP message about KVM not
being loaded/enabled, versus some random parameter not existing.
- SKIP tests that hit EACCES when attempting to access a file, with a "Root
required?" help message. In most cases, the test just needs to be run with
elevated permissions.
|
|
KVM x86 misc changes for 6.17
- Prevert the host's DEBUGCTL.FREEZE_IN_SMM (Intel only) when running the
guest. Failure to honor FREEZE_IN_SMM can bleed host state into the guest.
- Explicitly check vmcs12.GUEST_DEBUGCTL on nested VM-Enter (Intel only) to
prevent L1 from running L2 with features that KVM doesn't support, e.g. BTF.
- Intercept SPEC_CTRL on AMD if the MSR shouldn't exist according to the
vCPU's CPUID model.
- Rework the MSR interception code so that the SVM and VMX APIs are more or
less identical.
- Recalculate all MSR intercepts from the "source" on MSR filter changes, and
drop the dedicated "shadow" bitmaps (and their awful "max" size defines).
- WARN and reject loading kvm-amd.ko instead of panicking the kernel if the
nested SVM MSRPM offsets tracker can't handle an MSR.
- Advertise support for LKGS (Load Kernel GS base), a new instruction that's
loosely related to FRED, but is supported and enumerated independently.
- Fix a user-triggerable WARN that syzkaller found by stuffing INIT_RECEIVED,
a.k.a. WFS, and then putting the vCPU into VMX Root Mode (post-VMXON). Use
the same approach KVM uses for dealing with "impossible" emulation when
running a !URG guest, and simply wait until KVM_RUN to detect that the vCPU
has architecturally impossible state.
- Add KVM_X86_DISABLE_EXITS_APERFMPERF to allow disabling interception of
APERF/MPERF reads, so that a "properly" configured VM can "virtualize"
APERF/MPERF (with many caveats).
- Reject KVM_SET_TSC_KHZ if vCPUs have been created, as changing the "default"
frequency is unsupported for VMs with a "secure" TSC, and there's no known
use case for changing the default frequency for other VM types.
|
|
Expand kvm_pin_this_task_to_pcpu() into a set of APIs to allow pinning a
task (or self) to a CPU (any or specific). This will allow deduplicating
code throughout a variety of selftests.
Opportunistically use "self" instead of "this_task" as it is both more
concise and less ambiguous.
Link: https://lore.kernel.org/r/20250626001225.744268-4-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
Add helpers to create eventfds and to (de)assign eventfds via KVM_IRQFD.
Tested-by: K Prateek Nayak <kprateek.nayak@amd.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20250522235223.3178519-13-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
Add an inner __open_path_or_exit() API to let the caller provide additional
information on ENOENT to try and help the user figure out why the test is
being skipped, e.g. for files like the page_idle bitmap needed by the
access tracking perf, which is dependent on a Kconfig.
Immediately convert /dev/kvm to the new API, both as an example and because
users might not know that some architectures/setups require loading KVM.
Link: https://lore.kernel.org/r/20250516215909.2551628-3-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
KVM selftests changes for 6.16:
- Add support for SNP to the various SEV selftests.
- Add a selftest to verify fastops instructions via forced emulation.
- Add MGLRU support to the access tracking perf test.
|
|
Add KVM selftests header files for LoongArch, including processor.h
and kvm_util_arch.h. It mainly contains LoongArch CSR register and page
table entry definition.
Signed-off-by: Bibo Mao <maobibo@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
On LoongArch system, 16K page is used in general and GVA width is 47 bit
while GPA width is 47 bit also, here add new VM mode VM_MODE_P47V47_16K.
Signed-off-by: Bibo Mao <maobibo@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
Move the SMT control check out of the hyperv_cpuid selftest so that it
is generally accessible all KVM selftests. Split the functionality into
a helper that populates a buffer with SMT control value which other
helpers can use to ascertain if SMT state is available and active.
Signed-off-by: Pratik R. Sampat <prsampat@amd.com>
Link: https://lore.kernel.org/r/20250305230000.231025-5-prsampat@amd.com
[sean: prepend is_ to the helpers]
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
Now that the binary stats cache infrastructure is largely scope agnostic,
add support for vCPU-scoped stats. Like VM stats, open and cache the
stats FD when the vCPU is created so that it's guaranteed to be valid when
vcpu_get_stats() is invoked.
Account for the extra per-vCPU file descriptor in kvm_set_files_rlimit(),
so that tests that create large VMs don't run afoul of resource limits.
To sanity check that the infrastructure actually works, and to get a bit
of bonus coverage, add an assert in x86's xapic_ipi_test to verify that
the number of HLTs executed by the test matches the number of HLT exits
observed by KVM.
Tested-by: Manali Shukla <Manali.Shukla@amd.com>
Link: https://lore.kernel.org/r/20250111005049.1247555-9-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
Move the max vCPUs test's RLIMIT_NOFILE adjustments to common code, and
use the new helper to adjust the resource limit for non-barebones VMs by
default. x86's recalc_apic_map_test creates 512 vCPUs, and a future
change will open the binary stats fd for all vCPUs, which will put the
recalc APIC test above some distros' default limit of 1024.
Link: https://lore.kernel.org/r/20250111005049.1247555-8-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
Add a struct and helpers to manage the binary stats cache, which is
currently used only for VM-scoped stats. This will allow expanding the
selftests infrastructure to provide support for vCPU-scoped binary stats,
which, except for the ioctl to get the stats FD are identical to VM-scoped
stats.
Defer converting __vm_get_stat() to a scope-agnostic helper to a future
patch, as getting the stats FD from KVM needs to be moved elsewhere
before it can be made completely scope-agnostic.
Link: https://lore.kernel.org/r/20250111005049.1247555-6-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
Turn vm_get_stat() into a macro that generates a string for the stat name,
as opposed to taking a string. This will allow hardening stat usage in
the future to generate errors on unknown stats at compile time.
No functional change intended.
Link: https://lore.kernel.org/r/20250111005049.1247555-5-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
Assert that the register being read/written by vcpu_{g,s}et_reg() is no
larger than a uint64_t, i.e. that a selftest isn't unintentionally
truncating the value being read/written.
Ideally, the assert would be done at compile-time, but that would limit
the checks to hardcoded accesses and/or require fancier compile-time
assertion infrastructure to filter out dynamic usage.
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Link: https://lore.kernel.org/r/20241128005547.4077116-4-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
Return a uint64_t from vcpu_get_reg() instead of having the caller provide
a pointer to storage, as none of the vcpu_get_reg() usage in KVM selftests
accesses a register larger than 64 bits, and vcpu_set_reg() only accepts a
64-bit value. If a use case comes along that needs to get a register that
is larger than 64 bits, then a utility can be added to assert success and
take a void pointer, but until then, forcing an out param yields ugly code
and prevents feeding the output of vcpu_get_reg() into vcpu_set_reg().
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Acked-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Link: https://lore.kernel.org/r/20241128005547.4077116-3-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
KVM selftests changes for 6.12:
- Fix a goof that caused some Hyper-V tests to be skipped when run on bare
metal, i.e. NOT in a VM.
- Add a regression test for KVM's handling of SHUTDOWN for an SEV-ES guest.
- Explicitly include one-off assets in .gitignore. Past Sean was completely
wrong about not being able to detect missing .gitignore entries.
- Verify userspace single-stepping works when KVM happens to handle a VM-Exit
in its fastpath.
- Misc cleanups
|
|
Add a test to verify that KVM correctly exits (or not) when a vCPU's
coalesced I/O ring is full (or isn't). Iterate over all legal starting
points in the ring (with an empty ring), and verify that KVM doesn't exit
until the ring is full.
Opportunistically verify that KVM exits immediately on non-coalesced I/O,
either because the MMIO/PIO region was never registered, or because a
previous region was unregistered.
This is a regression test for a KVM bug where KVM would prematurely exit
due to bad math resulting in a false positive if the first entry in the
ring was before the halfway mark. See commit 92f6d4130497 ("KVM: Fix
coalesced_mmio_has_room() to avoid premature userspace exit").
Enable the test for x86, arm64, and risc-v, i.e. all architectures except
s390, which doesn't have MMIO.
On x86, which has both MMIO and PIO, interleave MMIO and PIO into the same
ring, as KVM shouldn't exit until a non-coalesced I/O is encountered,
regardless of whether the ring is filled with MMIO, PIO, or both.
Lastly, wrap the coalesced I/O ring in a structure to prepare for a
potential future where KVM supports multiple ring buffers beyond KVM's
"default" built-in buffer.
Link: https://lore.kernel.org/all/20240820133333.1724191-1-ilstam@amazon.com
Cc: Ilias Stamatis <ilstam@amazon.com>
Cc: Marc Zyngier <maz@kernel.org>
Cc: Oliver Upton <oliver.upton@linux.dev>
Cc: Anup Patel <anup@brainfault.org>
Link: https://lore.kernel.org/r/20240828181446.652474-2-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
Remove sefltests' kvm_memcmp_hva_gva(), which has literally never had a
single user since it was introduced by commit 783e9e51266eb ("kvm:
selftests: add API testing infrastructure").
Link: https://lore.kernel.org/r/20240802200853.336512-1-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
Now that kvm_vm_arch exists, move the GDT, IDT, and TSS fields to x86's
implementation, as the structures are firmly x86-only.
Reviewed-by: Ackerley Tng <ackerleytng@google.com>
Link: https://lore.kernel.org/r/20240314232637.2538648-4-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
Move the base types unique to KVM selftests out of kvm_util.h and into a
new header, kvm_util_types.h. This will allow kvm_util_arch.h, i.e. core
arch headers, to reference common types, e.g. vm_vaddr_t and vm_paddr_t.
No functional change intended.
Reviewed-by: Ackerley Tng <ackerleytng@google.com>
Link: https://lore.kernel.org/r/20240314232637.2538648-3-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
Effectively revert the movement of code from kvm_util.h => kvm_util_base.h,
as the TL;DR of the justification for the move was to avoid #idefs and/or
circular dependencies between what ended up being ucall_common.h and what
was (and now again, is), kvm_util.h.
But avoiding #ifdef and circular includes is trivial: don't do that. The
cost of removing kvm_util_base.h is a few extra includes of ucall_common.h,
but that cost is practically nothing. On the other hand, having a "base"
version of a header that is really just the header itself is confusing,
and makes it weird/hard to choose names for headers that actually are
"base" headers, e.g. to hold core KVM selftests typedefs.
For all intents and purposes, this reverts commit
7d9a662ed9f0403e7b94940dceb81552b8edb931.
Reviewed-by: Ackerley Tng <ackerleytng@google.com>
Link: https://lore.kernel.org/r/20240314232637.2538648-2-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
Now that core kvm_util declarations have special home in
kvm_util_base.h, move ucall-related declarations out into a separate
header.
Signed-off-by: Michael Roth <michael.roth@amd.com>
Message-Id: <20211210164620.11636-3-michael.roth@amd.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Between helper macros and interfaces that will be introduced in
subsequent patches, much of kvm_util.h would end up being declarations
specific to ucall. Ideally these could be separated out into a separate
header since they are not strictly required for writing guest tests and
are mostly self-contained interfaces other than a reliance on a few
core declarations like struct kvm_vm. This doesn't make a big
difference as far as how tests will be compiled/written since all these
interfaces will still be packaged up into a single/common libkvm.a used
by all tests, but it is still nice to be able to compartmentalize to
improve readabilty and reduce merge conflicts in the future for common
tasks like adding new interfaces to kvm_util.h.
Furthermore, some of the ucall declarations will be arch-specific,
requiring various #ifdef'ery in kvm_util.h. Ideally these declarations
could live in separate arch-specific headers, e.g.
include/<arch>/ucall.h, which would handle arch-specific declarations
as well as pulling in common ucall-related declarations shared by all
archs.
One simple way to do this would be to #include ucall.h at the bottom of
kvm_util.h, after declarations it relies upon like struct kvm_vm.
This is brittle however, and doesn't scale easily to other sets of
interfaces that may be added in the future.
Instead, move all declarations currently in kvm_util.h into
kvm_util_base.h, then have kvm_util.h #include it. With this change,
non-base declarations can be selectively moved/introduced into separate
headers, which can then be included in kvm_util.h so that individual
tests don't need to be touched. Subsequent patches will then move
ucall-related declarations into a separate header to meet the above
goals.
Signed-off-by: Michael Roth <michael.roth@amd.com>
Message-Id: <20211210164620.11636-2-michael.roth@amd.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
KVM/riscv changes for 5.17, take #1
- Use common KVM implementation of MMU memory caches
- SBI v0.2 support for Guest
- Initial KVM selftests support
- Fix to avoid spurious virtual interrupts after clearing hideleg CSR
- Update email address for Anup and Atish
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD
KVM/arm64 updates for Linux 5.16
- Simplification of the 'vcpu first run' by integrating it into
KVM's 'pid change' flow
- Refactoring of the FP and SVE state tracking, also leading to
a simpler state and less shared data between EL1 and EL2 in
the nVHE case
- Tidy up the header file usage for the nvhe hyp object
- New HYP unsharing mechanism, finally allowing pages to be
unmapped from the Stage-1 EL2 page-tables
- Various pKVM cleanups around refcounting and sharing
- A couple of vgic fixes for bugs that would trigger once
the vcpu xarray rework is merged, but not sooner
- Add minimal support for ARMv8.7's PMU extension
- Rework kvm_pgtable initialisation ahead of the NV work
- New selftest for IRQ injection
- Teach selftests about the lack of default IPA space and
page sizes
- Expand sysreg selftest to deal with Pointer Authentication
- The usual bunch of cleanups and doc update
|
|
We add initial support for RISC-V 64-bit in KVM selftests using
which we can cross-compile and run arch independent tests such as:
demand_paging_test
dirty_log_test
kvm_create_max_vcpus,
kvm_page_table_test
set_memory_region_test
kvm_binary_stats_test
All VM guest modes defined in kvm_util.h require at least 48-bit
guest virtual address so to use KVM RISC-V selftests hardware
need to support at least Sv48 MMU for guest (i.e. VS-mode).
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-and-tested-by: Atish Patra <atishp@rivosinc.com>
|
|
* kvm-arm64/selftest/irq-injection:
: .
: New tests from Ricardo Koller:
: "This series adds a new test, aarch64/vgic-irq, that validates the injection of
: different types of IRQs from userspace using various methods and configurations"
: .
KVM: selftests: aarch64: Add test for restoring active IRQs
KVM: selftests: aarch64: Add ISPENDR write tests in vgic_irq
KVM: selftests: aarch64: Add tests for IRQFD in vgic_irq
KVM: selftests: Add IRQ GSI routing library functions
KVM: selftests: aarch64: Add test_inject_fail to vgic_irq
KVM: selftests: aarch64: Add tests for LEVEL_INFO in vgic_irq
KVM: selftests: aarch64: Level-sensitive interrupts tests in vgic_irq
KVM: selftests: aarch64: Add preemption tests in vgic_irq
KVM: selftests: aarch64: Cmdline arg to set EOI mode in vgic_irq
KVM: selftests: aarch64: Cmdline arg to set number of IRQs in vgic_irq test
KVM: selftests: aarch64: Abstract the injection functions in vgic_irq
KVM: selftests: aarch64: Add vgic_irq to test userspace IRQ injection
KVM: selftests: aarch64: Add vGIC library functions to deal with vIRQ state
KVM: selftests: Add kvm_irq_line library function
KVM: selftests: aarch64: Add GICv3 register accessor library functions
KVM: selftests: aarch64: Add function for accessing GICv3 dist and redist registers
KVM: selftests: aarch64: Move gic_v3.h to shared headers
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
Add an architecture independent wrapper function for creating and
writing IRQ GSI routing tables. Also add a function to add irqchip
entries.
Signed-off-by: Ricardo Koller <ricarkol@google.com>
Acked-by: Andrew Jones <drjones@redhat.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20211109023906.1091208-15-ricarkol@google.com
|
|
Add an architecture independent wrapper function for the KVM_IRQ_LINE
ioctl.
Signed-off-by: Ricardo Koller <ricarkol@google.com>
Acked-by: Andrew Jones <drjones@redhat.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20211109023906.1091208-5-ricarkol@google.com
|
|
The 16kB page size is not a popular choice, due to only a few CPUs
actually implementing support for it. However, it can lead to some
interesting performance improvements given the right uarch choices.
Add support for this page size for various PA/VA combinations.
Signed-off-by: Marc Zyngier <maz@kernel.org>
Reviewed-by: Andrew Jones <drjones@redhat.com>
Link: https://lore.kernel.org/r/20211227124809.1335409-7-maz@kernel.org
|
|
Some of the arm64 systems out there have an IPA space that is
positively tiny. Nonetheless, they make great KVM hosts.
Add support for 36bit IPA support with 4kB pages, which makes
some of the fruity machines happy. Whilst we're at it, add support
for 64kB pages as well, though these boxes have no support for it.
Reviewed-by: Andrew Jones <drjones@redhat.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20211227124809.1335409-6-maz@kernel.org
|
|
Contrary to popular belief, there is no such thing as a default
IPA size on arm64. Anything goes, and implementations are the
usual Wild West.
The selftest infrastructure default to 40bit IPA, which obviously
doesn't work for some systems out there.
Turn VM_MODE_DEFAULT from a constant into a variable, and let
guest_modes_append_default() populate it, depending on what
the HW can do. In order to preserve the current behaviour, we
still pick 40bits IPA as the default if it is available, and
the largest supported IPA space otherwise.
Signed-off-by: Marc Zyngier <maz@kernel.org>
Reviewed-by: Andrew Jones <drjones@redhat.com>
Link: https://lore.kernel.org/r/20211227124809.1335409-3-maz@kernel.org
|
|
Attempting to compile on a non-x86 architecture fails with
include/kvm_util.h: In function ‘vm_compute_max_gfn’:
include/kvm_util.h:79:21: error: dereferencing pointer to incomplete type ‘struct kvm_vm’
return ((1ULL << vm->pa_bits) >> vm->page_shift) - 1;
^~
This is because the declaration of struct kvm_vm is in
lib/kvm_util_internal.h as an effort to make it private to
the test lib code. We can still provide arch specific functions,
though, by making the generic function symbols weak. Do that to
fix the compile error.
Fixes: c8cc43c1eae2 ("selftests: KVM: avoid failures due to reserved HyperTransport region")
Cc: stable@vger.kernel.org
Signed-off-by: Andrew Jones <drjones@redhat.com>
Message-Id: <20211214151842.848314-1-drjones@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
AMD proceessors define an address range that is reserved by HyperTransport
and causes a failure if used for guest physical addresses. Avoid
selftests failures by reserving those guest physical addresses; the
rules are:
- On parts with <40 bits, its fully hidden from software.
- Before Fam17h, it was always 12G just below 1T, even if there was more
RAM above this location. In this case we just not use any RAM above 1T.
- On Fam17h and later, it is variable based on SME, and is either just
below 2^48 (no encryption) or 2^43 (encryption).
Fixes: ef4c9f4f6546 ("KVM: selftests: Fix 32-bit truncation of vm_get_max_gfn()")
Cc: stable@vger.kernel.org
Cc: David Matlack <dmatlack@google.com>
Reported-by: Maxim Levitsky <mlevitsk@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20210805105423.412878-1-pbonzini@redhat.com>
Reviewed-by: Sean Christopherson <seanjc@google.com>
Tested-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Refactors out open path support from open_kvm_dev_path_or_exit() and
adds new helper for SEV device path.
Signed-off-by: Peter Gonda <pgonda@google.com>
Suggested-by: Sean Christopherson <seanjc@google.com>
Cc: Marc Orr <marcorr@google.com>
Cc: Sean Christopherson <seanjc@google.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Brijesh Singh <brijesh.singh@amd.com>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: kvm@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Message-Id: <20211021174303.385706-5-pgonda@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD
KVM/arm64 updates for Linux 5.16
- More progress on the protected VM front, now with the full
fixed feature set as well as the limitation of some hypercalls
after initialisation.
- Cleanup of the RAZ/WI sysreg handling, which was pointlessly
complicated
- Fixes for the vgic placement in the IPA space, together with a
bunch of selftests
- More memcg accounting of the memory allocated on behalf of a guest
- Timer and vgic selftests
- Workarounds for the Apple M1 broken vgic implementation
- KConfig cleanups
- New kvmarm.mode=none option, for those who really dislike us
|
