| Age | Commit message (Collapse) | Author |
|---|
|
AMD's SDCIAE (SDCI Allocation Enforcement) PQE feature enables system software
to control the portions of L3 cache used for direct insertion of data from I/O
devices into the L3 cache.
Introduce a generic resctrl cache resource property "io_alloc_capable" as the
first part of the new "io_alloc" resctrl feature that will support AMD's
SDCIAE. Any architecture can set a cache resource as "io_alloc_capable" if
a portion of the cache can be allocated for I/O traffic.
Set the "io_alloc_capable" property for the L3 cache resource on x86 (AMD)
systems that support SDCIAE.
Signed-off-by: Babu Moger <babu.moger@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Link: https://patch.msgid.link/df85a9a6081674fd3ef6b4170920485512ce2ded.1762995456.git.babu.moger@amd.com
|
|
Add a kernel command-line parameter to enable or disable the exposure of
the L3 Smart Data Cache Injection Allocation Enforcement (SDCIAE) hardware
feature to resctrl.
Signed-off-by: Babu Moger <babu.moger@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Link: https://patch.msgid.link/c623edf7cb369ba9da966de47d9f1b666778a40e.1762995456.git.babu.moger@amd.com
|
|
Configure mbm_event mode on AMD platforms. On AMD platforms, it is
recommended to use the mbm_event mode, if supported, to prevent the
hardware from resetting counters between reads. This can result in
misleading values or display "Unavailable" if no counter is assigned
to the event.
Enable mbm_event mode, known as ABMC (Assignable Bandwidth Monitoring
Counters) on AMD, by default if the system supports it.
Update ABMC across all logical processors within the resctrl domain to
ensure proper functionality.
Signed-off-by: Babu Moger <babu.moger@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Link: https://lore.kernel.org/cover.1757108044.git.babu.moger@amd.com
|
|
ABMC feature details are reported via CPUID Fn8000_0020_EBX_x5.
Bits Description
15:0 MAX_ABMC Maximum Supported Assignable Bandwidth
Monitoring Counter ID + 1
The ABMC feature details are documented in APM [1] available from [2].
[1] AMD64 Architecture Programmer's Manual Volume 2: System Programming
Publication # 24593 Revision 3.41 section 19.3.3.3 Assignable Bandwidth
Monitoring (ABMC).
Detect the feature and number of assignable counters supported. For backward
compatibility, upon detecting the assignable counter feature, enable the
mbm_total_bytes and mbm_local_bytes events that users are familiar with as
part of original L3 MBM support.
Signed-off-by: Babu Moger <babu.moger@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Link: https://lore.kernel.org/cover.1757108044.git.babu.moger@amd.com
Link: https://bugzilla.kernel.org/show_bug.cgi?id=206537 # [2]
|
|
The cache allocation and memory bandwidth allocation feature properties are
consolidated into struct resctrl_cache and struct resctrl_membw respectively.
In preparation for more monitoring properties that will clobber the existing
resource struct more, re-organize the monitoring specific properties to also
be in a separate structure.
Also convert "bandwidth sources" terminology to "memory transactions" to have
consistency within resctrl for related monitoring features.
[ bp: Massage commit message. ]
Suggested-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: Babu Moger <babu.moger@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Link: https://lore.kernel.org/cover.1757108044.git.babu.moger@amd.com
|
|
Add a kernel command-line parameter to enable or disable the exposure of
the ABMC (Assignable Bandwidth Monitoring Counters) hardware feature to
resctrl.
Signed-off-by: Babu Moger <babu.moger@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Link: https://lore.kernel.org/cover.1757108044.git.babu.moger@amd.com
|
|
There's a rule in computer programming that objects appear zero, once, or many
times. So code accordingly.
There are two MBM events and resctrl is coded with a lot of
if (local)
do one thing
if (total)
do a different thing
Change the rdt_mon_domain and rdt_hw_mon_domain structures to hold arrays of
pointers to per event data instead of explicit fields for total and local
bandwidth.
Simplify by coding for many events using loops on which are enabled.
Move resctrl_is_mbm_event() to <linux/resctrl.h> so it can be used more
widely. Also provide a for_each_mbm_event_id() helper macro.
Cleanup variable names in functions touched to consistently use "eventid" for
those with type enum resctrl_event_id.
Signed-off-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Babu Moger <babu.moger@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Link: https://lore.kernel.org/cover.1757108044.git.babu.moger@amd.com
|
|
rdt_mon_features is used as a bitmask of enabled monitor events. A monitor
event's status is now maintained in mon_evt::enabled with all monitor events'
mon_evt structures found in the filesystem's mon_event_all[] array.
Remove the remaining uses of rdt_mon_features.
Signed-off-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Babu Moger <babu.moger@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Link: https://lore.kernel.org/cover.1757108044.git.babu.moger@amd.com
|
|
The resctrl file system now has complete knowledge of the status of every
event. So there is no need for per-event function calls to check.
Replace each of the resctrl_arch_is_{event}enabled() calls with
resctrl_is_mon_event_enabled(QOS_{EVENT}).
No functional change.
Signed-off-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Babu Moger <babu.moger@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Fenghua Yu <fenghuay@nvidia.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Link: https://lore.kernel.org/cover.1757108044.git.babu.moger@amd.com
|
|
There are currently only three monitor events, all associated with the
RDT_RESOURCE_L3 resource. Growing support for additional events will be easier
with some restructuring to have a single point in file system code where all
attributes of all events are defined.
Place all event descriptions into an array mon_event_all[]. Doing this has the
beneficial side effect of removing the need for rdt_resource::evt_list.
Add resctrl_event_id::QOS_FIRST_EVENT for a lower bound on range checks for
event ids and as the starting index to scan mon_event_all[].
Drop the code that builds evt_list and change the two places where the list is
scanned to scan mon_event_all[] instead using a new helper macro
for_each_mon_event().
Architecture code now informs file system code which events are available with
resctrl_enable_mon_event().
Signed-off-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Babu Moger <babu.moger@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Fenghua Yu <fenghuay@nvidia.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Link: https://lore.kernel.org/cover.1757108044.git.babu.moger@amd.com
|
|
subsystem
In the resctrl subsystem's Sub-NUMA Cluster (SNC) mode, the rdt_mon_domain
structure representing a NUMA node relies on the cacheinfo interface
(rdt_mon_domain::ci) to store L3 cache information (e.g., shared_cpu_map)
for monitoring. The L3 cache information of a SNC NUMA node determines
which domains are summed for the "top level" L3-scoped events.
rdt_mon_domain::ci is initialized using the first online CPU of a NUMA
node. When this CPU goes offline, its shared_cpu_map is cleared to contain
only the offline CPU itself. Subsequently, attempting to read counters
via smp_call_on_cpu(offline_cpu) fails (and error ignored), returning
zero values for "top-level events" without any error indication.
Replace the cacheinfo references in struct rdt_mon_domain and struct
rmid_read with the cacheinfo ID (a unique identifier for the L3 cache).
rdt_domain_hdr::cpu_mask contains the online CPUs associated with that
domain. When reading "top-level events", select a CPU from
rdt_domain_hdr::cpu_mask and utilize its L3 shared_cpu_map to determine
valid CPUs for reading RMID counter via the MSR interface.
Considering all CPUs associated with the L3 cache improves the chances
of picking a housekeeping CPU on which the counter reading work can be
queued, avoiding an unnecessary IPI.
Fixes: 328ea68874642 ("x86/resctrl: Prepare for new Sub-NUMA Cluster (SNC) monitor files")
Signed-off-by: Qinyun Tan <qinyuntan@linux.alibaba.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Tested-by: Tony Luck <tony.luck@intel.com>
Link: https://lore.kernel.org/20250530182053.37502-2-qinyuntan@linux.alibaba.com
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 resource control updates from Borislav Petkov:
"Carve out the resctrl filesystem-related code into fs/resctrl/ so that
multiple architectures can share the fs API for manipulating their
respective hw resource control implementation.
This is the second step in the work towards sharing the resctrl
filesystem interface, the next one being plugging ARM's MPAM into the
aforementioned fs API"
* tag 'x86_cache_for_v6.16_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (25 commits)
MAINTAINERS: Add reviewers for fs/resctrl
x86,fs/resctrl: Move the resctrl filesystem code to live in /fs/resctrl
x86/resctrl: Always initialise rid field in rdt_resources_all[]
x86/resctrl: Relax some asm #includes
x86/resctrl: Prefer alloc(sizeof(*foo)) idiom in rdt_init_fs_context()
x86/resctrl: Squelch whitespace anomalies in resctrl core code
x86/resctrl: Move pseudo lock prototypes to include/linux/resctrl.h
x86/resctrl: Fix types in resctrl_arch_mon_ctx_{alloc,free}() stubs
x86/resctrl: Move enum resctrl_event_id to resctrl.h
x86/resctrl: Move the filesystem bits to headers visible to fs/resctrl
fs/resctrl: Add boiler plate for external resctrl code
x86/resctrl: Add 'resctrl' to the title of the resctrl documentation
x86/resctrl: Split trace.h
x86/resctrl: Expand the width of domid by replacing mon_data_bits
x86/resctrl: Add end-marker to the resctrl_event_id enum
x86/resctrl: Move is_mba_sc() out of core.c
x86/resctrl: Drop __init/__exit on assorted symbols
x86/resctrl: Resctrl_exit() teardown resctrl but leave the mount point
x86/resctrl: Check all domains are offline in resctrl_exit()
x86/resctrl: Rename resctrl_sched_in() to begin with "resctrl_arch_"
...
|
|
x86 has an array, rdt_resources_all[], of all possible resources.
The for-each-resource walkers depend on the rid field of all
resources being initialised.
If the array ever grows due to another architecture adding a resource
type that is not defined on x86, the for-each-resources walkers will
loop forever.
Initialise all the rid values in resctrl_arch_late_init() before
any for-each-resource walker can be called.
Signed-off-by: James Morse <james.morse@arm.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Reviewed-by: Fenghua Yu <fenghuay@nvidia.com>
Tested-by: Fenghua Yu <fenghuay@nvidia.com>
Tested-by: Babu Moger <babu.moger@amd.com>
Tested-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Tested-by: Tony Luck <tony.luck@intel.com>
Link: https://lore.kernel.org/20250515165855.31452-24-james.morse@arm.com
|
|
is_mba_sc() is defined in core.c, but has no callers there. It does not access
any architecture private structures.
Move this to rdtgroup.c where the majority of callers are. This makes the move
of the filesystem code to /fs/ cleaner.
Signed-off-by: James Morse <james.morse@arm.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Reviewed-by: Tony Luck <tony.luck@intel.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Reviewed-by: Fenghua Yu <fenghuay@nvidia.com>
Tested-by: Fenghua Yu <fenghuay@nvidia.com>
Tested-by: Carl Worth <carl@os.amperecomputing.com> # arm64
Tested-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Tested-by: Peter Newman <peternewman@google.com>
Tested-by: Amit Singh Tomar <amitsinght@marvell.com> # arm64
Tested-by: Shanker Donthineni <sdonthineni@nvidia.com> # arm64
Tested-by: Babu Moger <babu.moger@amd.com>
Tested-by: Tony Luck <tony.luck@intel.com>
Link: https://lore.kernel.org/20250515165855.31452-11-james.morse@arm.com
|
|
Because ARM's MPAM controls are probed using MMIO, resctrl can't be
initialised until enough CPUs are online to have determined the system-wide
supported num_closid. Arm64 also supports 'late onlined secondaries', where
only a subset of CPUs are online during boot.
These two combine to mean the MPAM driver may not be able to initialise
resctrl until user-space has brought 'enough' CPUs online.
To allow MPAM to initialise resctrl after __init text has been free'd, remove
all the __init markings from resctrl.
The existing __exit markings cause these functions to be removed by the linker
as it has never been possible to build resctrl as a module. MPAM has an error
interrupt which causes the driver to reset and disable itself. Remove the
__exit markings to allow the MPAM driver to tear down resctrl when an error
occurs.
Signed-off-by: James Morse <james.morse@arm.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Reviewed-by: Tony Luck <tony.luck@intel.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Reviewed-by: Fenghua Yu <fenghuay@nvidia.com>
Tested-by: Fenghua Yu <fenghuay@nvidia.com>
Tested-by: Carl Worth <carl@os.amperecomputing.com> # arm64
Tested-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Tested-by: Peter Newman <peternewman@google.com>
Tested-by: Amit Singh Tomar <amitsinght@marvell.com> # arm64
Tested-by: Shanker Donthineni <sdonthineni@nvidia.com> # arm64
Tested-by: Babu Moger <babu.moger@amd.com>
Tested-by: Tony Luck <tony.luck@intel.com>
Link: https://lore.kernel.org/20250515165855.31452-10-james.morse@arm.com
|
|
For historic reasons there are some TSC-related functions in the
<asm/msr.h> header, even though there's an <asm/tsc.h> header.
To facilitate the relocation of rdtsc{,_ordered}() from <asm/msr.h>
to <asm/tsc.h> and to eventually eliminate the inclusion of
<asm/msr.h> in <asm/tsc.h>, add an explicit <asm/msr.h> dependency
to the source files that reference definitions from <asm/msr.h>.
[ mingo: Clarified the changelog. ]
Signed-off-by: Xin Li (Intel) <xin@zytor.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Dave Hansen <dave.hansen@linux.intel.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Kees Cook <keescook@chromium.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Uros Bizjak <ubizjak@gmail.com>
Link: https://lore.kernel.org/r/20250501054241.1245648-1-xin@zytor.com
|
|
Suggested-by: "H. Peter Anvin" <hpa@zytor.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Juergen Gross <jgross@suse.com>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Xin Li <xin@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Suggested-by: "H. Peter Anvin" <hpa@zytor.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Juergen Gross <jgross@suse.com>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Xin Li <xin@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Suggested-by: "H. Peter Anvin" <hpa@zytor.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Juergen Gross <jgross@suse.com>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Xin Li <xin@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Each of get_{mon,ctrl}_domain_from_cpu() only has one caller.
Once the filesystem code is moved to /fs/, there is no equivalent to
core.c.
Move these functions to each live next to their caller. This allows
them to be made static and the header file entries to be removed.
Signed-off-by: James Morse <james.morse@arm.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Fenghua Yu <fenghuay@nvidia.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Reviewed-by: Babu Moger <babu.moger@amd.com>
Reviewed-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Tested-by: Peter Newman <peternewman@google.com>
Tested-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Tested-by: Amit Singh Tomar <amitsinght@marvell.com> # arm64
Tested-by: Shanker Donthineni <sdonthineni@nvidia.com> # arm64
Tested-by: Babu Moger <babu.moger@amd.com>
Link: https://lore.kernel.org/r/20250311183715.16445-31-james.morse@arm.com
|
|
resctrl_file_fflags_init() is called from the architecture specific code to
make the 'thread_throttle_mode' file visible. The architecture specific code
has already set the membw.throttle_mode in the rdt_resource.
This forces the RFTYPE flags used by resctrl to be exposed to the architecture
specific code.
This doesn't need to be specific to the architecture, the throttle_mode can be
used by resctrl to determine if the 'thread_throttle_mode' file should be
visible. This allows the RFTYPE flags to be private to resctrl.
Add thread_throttle_mode_init(), and use it to call resctrl_file_fflags_init()
from resctrl_init(). This avoids publishing an extra function between the
architecture and filesystem code.
Signed-off-by: James Morse <james.morse@arm.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Reviewed-by: Fenghua Yu <fenghuay@nvidia.com>
Reviewed-by: Babu Moger <babu.moger@amd.com>
Reviewed-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Tested-by: Peter Newman <peternewman@google.com>
Tested-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Tested-by: Amit Singh Tomar <amitsinght@marvell.com> # arm64
Tested-by: Shanker Donthineni <sdonthineni@nvidia.com> # arm64
Tested-by: Babu Moger <babu.moger@amd.com>
Link: https://lore.kernel.org/r/20250311183715.16445-28-james.morse@arm.com
|
|
mba_mbps_default_event is initialised based on whether mbm_local or mbm_total
is supported. In the case of both, it is initialised to mbm_local.
mba_mbps_default_event is initialised in core.c's get_rdt_mon_resources(),
while all the readers are in rdtgroup.c.
After this code is split into architecture-specific and filesystem code,
get_rdt_mon_resources() remains part of the architecture code, which would
mean mba_mbps_default_event has to be exposed by the filesystem code.
Move the initialisation to the filesystem's resctrl_mon_resource_init().
Signed-off-by: James Morse <james.morse@arm.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Reviewed-by: Fenghua Yu <fenghuay@nvidia.com>
Reviewed-by: Babu Moger <babu.moger@amd.com>
Reviewed-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Tested-by: Peter Newman <peternewman@google.com>
Tested-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Tested-by: Amit Singh Tomar <amitsinght@marvell.com> # arm64
Tested-by: Shanker Donthineni <sdonthineni@nvidia.com> # arm64
Tested-by: Babu Moger <babu.moger@amd.com>
Link: https://lore.kernel.org/r/20250311183715.16445-22-james.morse@arm.com
|
|
When BMEC is supported the resctrl event can be configured in a number of
ways. This depends on architecture support. rdt_get_mon_l3_config() modifies
the struct mon_evt and calls resctrl_file_fflags_init() to create the files
that allow the configuration.
Splitting this into separate architecture and filesystem parts would require
the struct mon_evt and resctrl_file_fflags_init() to be exposed.
Instead, add resctrl_arch_is_evt_configurable(), and use this from
resctrl_mon_resource_init() to initialise struct mon_evt and call
resctrl_file_fflags_init().
resctrl_arch_is_evt_configurable() calls rdt_cpu_has() so it doesn't obviously
benefit from being inlined. Putting it in core.c will allow rdt_cpu_has() to
eventually become static.
Signed-off-by: James Morse <james.morse@arm.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Reviewed-by: Tony Luck <tony.luck@intel.com>
Reviewed-by: Fenghua Yu <fenghuay@nvidia.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Reviewed-by: Babu Moger <babu.moger@amd.com>
Tested-by: Carl Worth <carl@os.amperecomputing.com> # arm64
Tested-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Tested-by: Peter Newman <peternewman@google.com>
Tested-by: Amit Singh Tomar <amitsinght@marvell.com> # arm64
Tested-by: Shanker Donthineni <sdonthineni@nvidia.com> # arm64
Tested-by: Babu Moger <babu.moger@amd.com>
Link: https://lore.kernel.org/r/20250311183715.16445-20-james.morse@arm.com
|
|
The architecture specific parts of resctrl provide helpers like
is_mbm_total_enabled() and is_mbm_local_enabled() to hide accesses to the
rdt_mon_features bitmap.
Exposing a group of helpers between the architecture and filesystem code is
preferable to a single unsigned-long like rdt_mon_features. Helpers can be more
readable and have a well defined behaviour, while allowing architectures to hide
more complex behaviour.
Once the filesystem parts of resctrl are moved, these existing helpers can no
longer live in internal.h. Move them to include/linux/resctrl.h Once these are
exposed to the wider kernel, they should have a 'resctrl_arch_' prefix, to fit
the rest of the arch<->fs interface.
Move and rename the helpers that touch rdt_mon_features directly. is_mbm_event()
and is_mbm_enabled() are only called from rdtgroup.c, so can be moved into that
file.
Signed-off-by: James Morse <james.morse@arm.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Tony Luck <tony.luck@intel.com>
Reviewed-by: Fenghua Yu <fenghuay@nvidia.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Reviewed-by: Babu Moger <babu.moger@amd.com>
Reviewed-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Tested-by: Carl Worth <carl@os.amperecomputing.com> # arm64
Tested-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Tested-by: Peter Newman <peternewman@google.com>
Tested-by: Amit Singh Tomar <amitsinght@marvell.com> # arm64
Tested-by: Shanker Donthineni <sdonthineni@nvidia.com> # arm64
Tested-by: Babu Moger <babu.moger@amd.com>
Link: https://lore.kernel.org/r/20250311183715.16445-19-james.morse@arm.com
|
|
rdt_put_mon_l3_config() is called via the architecture's resctrl_arch_exit()
call, and appears to free the rmid_ptrs[] and closid_num_dirty_rmid[] arrays.
In reality this code is marked __exit, and is removed by the linker as resctrl
can't be built as a module.
To separate the filesystem and architecture parts of resctrl, this free()ing
work needs to be triggered by the filesystem, as these structures belong to
the filesystem code.
Rename rdt_put_mon_l3_config() to resctrl_mon_resource_exit() and call it from
resctrl_exit(). The kfree() is currently dependent on r->mon_capable.
Signed-off-by: James Morse <james.morse@arm.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Reviewed-by: Tony Luck <tony.luck@intel.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Reviewed-by: Fenghua Yu <fenghuay@nvidia.com>
Reviewed-by: Babu Moger <babu.moger@amd.com>
Tested-by: Carl Worth <carl@os.amperecomputing.com> # arm64
Tested-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Tested-by: Peter Newman <peternewman@google.com>
Tested-by: Amit Singh Tomar <amitsinght@marvell.com> # arm64
Tested-by: Shanker Donthineni <sdonthineni@nvidia.com> # arm64
Tested-by: Babu Moger <babu.moger@amd.com>
Link: https://lore.kernel.org/r/20250311183715.16445-16-james.morse@arm.com
|
|
rdt_find_domain() finds a domain given a resource and a cache-id. This is
used by both the architecture code and the filesystem code.
After the filesystem code moves to live in /fs/, this helper is either
duplicated by all architectures, or needs exposing by the filesystem code.
Add the declaration to the global header file. As it's now globally visible,
and has only a handful of callers, swap the 'rdt' for 'resctrl'. Move the
function to live with its caller in ctrlmondata.c as the filesystem code will
not have anything corresponding to core.c.
Signed-off-by: James Morse <james.morse@arm.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Fenghua Yu <fenghuay@nvidia.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Reviewed-by: Babu Moger <babu.moger@amd.com>
Reviewed-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Tested-by: Peter Newman <peternewman@google.com>
Tested-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Tested-by: Amit Singh Tomar <amitsinght@marvell.com> # arm64
Tested-by: Shanker Donthineni <sdonthineni@nvidia.com> # arm64
Tested-by: Babu Moger <babu.moger@amd.com>
Link: https://lore.kernel.org/r/20250311183715.16445-13-james.morse@arm.com
|
|
rdtgroup_init() needs exposing to the rest of the kernel so that arch code can
call it once it lives in core code. As this is one of the few functions
exposed, rename it to have "resctrl" in the name. The same goes for the exit
call.
Rename x86's arch code init functions for RDT to have an arch prefix to make
it clear these are part of the architecture code.
Co-developed-by: Dave Martin <Dave.Martin@arm.com>
Signed-off-by: Dave Martin <Dave.Martin@arm.com>
Signed-off-by: James Morse <james.morse@arm.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Reviewed-by: Tony Luck <tony.luck@intel.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Reviewed-by: Fenghua Yu <fenghuay@nvidia.com>
Reviewed-by: Babu Moger <babu.moger@amd.com>
Tested-by: Carl Worth <carl@os.amperecomputing.com> # arm64
Tested-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Tested-by: Peter Newman <peternewman@google.com>
Tested-by: Amit Singh Tomar <amitsinght@marvell.com> # arm64
Tested-by: Shanker Donthineni <sdonthineni@nvidia.com> # arm64
Tested-by: Babu Moger <babu.moger@amd.com>
Link: https://lore.kernel.org/r/20250311183715.16445-12-james.morse@arm.com
|
|
The struct rdt_resource default_ctrl is used by both the architecture code for
resetting the hardware controls, and sometimes by the filesystem code as the
default value for the schema, unless the bandwidth software controller is in
use.
Having the default exposed by the architecture code causes unnecessary
duplication for each architecture as the default value must be specified, but
can be derived from other schema properties. Now that the maximum bandwidth is
explicitly described, resctrl can derive the default value from the schema
format and the other resource properties.
Signed-off-by: James Morse <james.morse@arm.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Reviewed-by: Tony Luck <tony.luck@intel.com>
Reviewed-by: Fenghua Yu <fenghuay@nvidia.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Reviewed-by: Babu Moger <babu.moger@amd.com>
Tested-by: Carl Worth <carl@os.amperecomputing.com> # arm64
Tested-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Tested-by: Peter Newman <peternewman@google.com>
Tested-by: Amit Singh Tomar <amitsinght@marvell.com> # arm64
Tested-by: Shanker Donthineni <sdonthineni@nvidia.com> # arm64
Tested-by: Babu Moger <babu.moger@amd.com>
Link: https://lore.kernel.org/r/20250311183715.16445-9-james.morse@arm.com
|
|
__rdt_get_mem_config_amd() and __get_mem_config_intel() both use the
default_ctrl property as a maximum value. This is because the MBA schema works
differently between these platforms. Doing this complicates determining
whether the default_ctrl property belongs to the arch code, or can be derived
from the schema format.
Deriving the maximum or default value from the schema format would avoid the
architecture code having to tell resctrl such obvious things as the maximum
percentage is 100, and the maximum bitmap is all ones.
Maximum bandwidth is always going to vary per platform. Add max_bw as
a special case. This is currently used for the maximum MBA percentage on Intel
platforms, but can be removed from the architecture code if 'percentage'
becomes a schema format resctrl supports directly.
This value isn't needed for other schema formats.
This will allow the default_ctrl to be generated from the schema properties
when it is needed.
Signed-off-by: James Morse <james.morse@arm.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Reviewed-by: Tony Luck <tony.luck@intel.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Reviewed-by: Fenghua Yu <fenghuay@nvidia.com>
Reviewed-by: Babu Moger <babu.moger@amd.com>
Tested-by: Carl Worth <carl@os.amperecomputing.com> # arm64
Tested-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Tested-by: Peter Newman <peternewman@google.com>
Tested-by: Amit Singh Tomar <amitsinght@marvell.com> # arm64
Tested-by: Shanker Donthineni <sdonthineni@nvidia.com> # arm64
Tested-by: Babu Moger <babu.moger@amd.com>
Link: https://lore.kernel.org/r/20250311183715.16445-8-james.morse@arm.com
|
|
The resctrl architecture code provides a data_width for the controls of each
resource. This is used to zero pad all control values in the schemata file so
they appear in columns. The same is done with the resource names to complete
the visual effect. e.g.
| SMBA:0=2048
| L3:0=00ff
AMD platforms discover their maximum bandwidth for the MB resource from
firmware, but hard-code the data_width to 4. If the maximum bandwidth requires
more digits - the tabular format is silently broken. This is also broken when
the mba_MBps mount option is used as the field width isn't updated. If new
schema are added resctrl will need to be able to determine the maximum width.
The benefit of this pretty-printing is questionable.
Instead of handling runtime discovery of the data_width for AMD platforms,
remove the feature. These fields are always zero padded so should be harmless
to remove if the whole field has been treated as a number. In the above
example, this would now look like this:
| SMBA:0=2048
| L3:0=ff
Signed-off-by: James Morse <james.morse@arm.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Reviewed-by: Tony Luck <tony.luck@intel.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Reviewed-by: Fenghua Yu <fenghuay@nvidia.com>
Reviewed-by: Babu Moger <babu.moger@amd.com>
Tested-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Tested-by: Peter Newman <peternewman@google.com>
Tested-by: Amit Singh Tomar <amitsinght@marvell.com> # arm64
Tested-by: Shanker Donthineni <sdonthineni@nvidia.com> # arm64
Tested-by: Babu Moger <babu.moger@amd.com>
Link: https://lore.kernel.org/r/20250311183715.16445-7-james.morse@arm.com
|
|
Resctrl's architecture code gets to specify a format string that is
used when printing schema entries. This is expected to be one of two
values that the filesystem code supports.
Setting this format string allows the architecture code to change
the ABI resctrl presents to user-space.
Instead, use the schema format enum to choose which format string to
use.
Signed-off-by: James Morse <james.morse@arm.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Reviewed-by: Tony Luck <tony.luck@intel.com>
Reviewed-by: Fenghua Yu <fenghuay@nvidia.com>
Reviewed-by: Babu Moger <babu.moger@amd.com>
Tested-by: Carl Worth <carl@os.amperecomputing.com> # arm64
Tested-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Tested-by: Peter Newman <peternewman@google.com>
Tested-by: Amit Singh Tomar <amitsinght@marvell.com> # arm64
Tested-by: Shanker Donthineni <sdonthineni@nvidia.com> # arm64
Tested-by: Babu Moger <babu.moger@amd.com>
Link: https://lore.kernel.org/r/20250311183715.16445-6-james.morse@arm.com
|
|
Resctrl's architecture code gets to specify a function pointer that is used
when parsing schema entries. This is expected to be one of two helpers from
the filesystem code.
Setting this function pointer allows the architecture code to change the ABI
resctrl presents to user-space, and forces resctrl to expose these helpers.
Instead, add a schema format enum to choose which schema parser to use. This
allows the helpers to be made static and the structs used for passing
arguments moved out of shared headers.
Signed-off-by: James Morse <james.morse@arm.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Reviewed-by: Tony Luck <tony.luck@intel.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Reviewed-by: Fenghua Yu <fenghuay@nvidia.com>
Reviewed-by: Babu Moger <babu.moger@amd.com>
Tested-by: Carl Worth <carl@os.amperecomputing.com> # arm64
Tested-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Tested-by: Peter Newman <peternewman@google.com>
Tested-by: Amit Singh Tomar <amitsinght@marvell.com> # arm64
Tested-by: Shanker Donthineni <sdonthineni@nvidia.com> # arm64
Tested-by: Babu Moger <babu.moger@amd.com>
Link: https://lore.kernel.org/r/20250311183715.16445-5-james.morse@arm.com
|
|
The resctrl arch code specifies whether a resource controls a cache or memory
using the fflags field. This field is then used by resctrl to determine which
files should be exposed in the filesystem.
Allowing the architecture to pick this value means the RFTYPE_ flags have to
be in a shared header, and allows an architecture to create a combination that
resctrl does not support.
Remove the fflags field, and pick the value based on the resource id.
Signed-off-by: James Morse <james.morse@arm.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Reviewed-by: Tony Luck <tony.luck@intel.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Reviewed-by: Fenghua Yu <fenghuay@nvidia.com>
Reviewed-by: Babu Moger <babu.moger@amd.com>
Tested-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Tested-by: Peter Newman <peternewman@google.com>
Tested-by: Amit Singh Tomar <amitsinght@marvell.com> # arm64
Tested-by: Shanker Donthineni <sdonthineni@nvidia.com> # arm64
Tested-by: Babu Moger <babu.moger@amd.com>
Link: https://lore.kernel.org/r/20250311183715.16445-4-james.morse@arm.com
|
|
Resctrl occasionally wants to know something about a specific resource, in
these cases it reaches into the arch code's rdt_resources_all[] array.
Once the filesystem parts of resctrl are moved to /fs/, this means it will
need visibility of the architecture specific struct rdt_hw_resource
definition, and the array of all resources. All architectures would also need
a r_resctrl member in this struct.
Instead, abstract this via a helper to allow architectures to do different
things here. Move the level enum to the resctrl header and add a helper to
retrieve the struct rdt_resource by 'rid'.
resctrl_arch_get_resource() should not return NULL for any value in the enum,
it may instead return a dummy resource that is !alloc_enabled && !mon_enabled.
Co-developed-by: Dave Martin <Dave.Martin@arm.com>
Signed-off-by: Dave Martin <Dave.Martin@arm.com>
Signed-off-by: James Morse <james.morse@arm.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Reviewed-by: Tony Luck <tony.luck@intel.com>
Reviewed-by: Fenghua Yu <fenghuay@nvidia.com>
Reviewed-by: Babu Moger <babu.moger@amd.com>
Tested-by: Peter Newman <peternewman@google.com>
Tested-by: Carl Worth <carl@os.amperecomputing.com> # arm64
Tested-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Tested-by: Amit Singh Tomar <amitsinght@marvell.com> # arm64
Tested-by: Shanker Donthineni <sdonthineni@nvidia.com> # arm64
Tested-by: Babu Moger <babu.moger@amd.com>
Link: https://lore.kernel.org/r/20250311183715.16445-3-james.morse@arm.com
|
|
The default input measurement to the mba_sc feedback loop for memory bandwidth
control when the user mounts with the "mba_MBps" option is the local bandwidth
event. But some systems may not support a local bandwidth event.
When local bandwidth event is not supported, check for support of total
bandwidth and use that instead.
Relax the mount option check to allow use of the "mba_MBps" option for systems
when only total bandwidth monitoring is supported. Also update the error
message.
Signed-off-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Tested-by: Babu Moger <babu.moger@amd.com>
Link: https://lore.kernel.org/r/20241206163148.83828-6-tony.luck@intel.com
|
|
Resctrl uses local memory bandwidth event as input to the feedback loop when
the mba_MBps mount option is used. This means that this mount option cannot be
used on systems that only support monitoring of total bandwidth.
Prepare to allow users to choose the input event independently for each
CTRL_MON group by adding a global variable "mba_mbps_default_event" used to
set the default event for each CTRL_MON group, and a new field
"mba_mbps_event" in struct rdtgroup to track which event is used for each
CTRL_MON group.
Notes:
1) Both of these are only used when the user mounts the filesystem with the
"mba_MBps" option.
2) Only check for support of local bandwidth event when initializing
mba_mbps_default_event. Support for total bandwidth event can be added
after other routines in resctrl have been updated to handle total bandwidth
event.
[ bp: Move mba_mbps_default_event extern into the arch header. ]
Signed-off-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Tested-by: Babu Moger <babu.moger@amd.com>
Link: https://lore.kernel.org/r/20241206163148.83828-3-tony.luck@intel.com
|
|
thread_throttle_mode_init() and mbm_config_rftype_init() both initialize
fflags for resctrl files.
Adding new files will involve adding another function to initialize
the fflags. This can be simplified by adding a new function
resctrl_file_fflags_init() and passing the file name and flags
to be initialized.
Consolidate fflags initialization into resctrl_file_fflags_init() and
remove thread_throttle_mode_init() and mbm_config_rftype_init().
[ Tony: Drop __init attribute so resctrl_file_fflags_init() can be used at
run time. ]
Signed-off-by: Babu Moger <babu.moger@amd.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Link: https://lore.kernel.org/r/20241206163148.83828-2-tony.luck@intel.com
|
|
After a recent LLVM change [1] that deduces __cold on functions that only call
cold code (such as __init functions), there is a section mismatch warning from
__get_mem_config_intel(), which got moved to .text.unlikely. as a result of
that optimization:
WARNING: modpost: vmlinux: section mismatch in reference: \
__get_mem_config_intel+0x77 (section: .text.unlikely.) -> thread_throttle_mode_init (section: .init.text)
Mark __get_mem_config_intel() as __init as well since it is only called
from __init code, which clears up the warning.
While __rdt_get_mem_config_amd() does not exhibit a warning because it
does not call any __init code, it is a similar function that is only
called from __init code like __get_mem_config_intel(), so mark it __init
as well to keep the code symmetrical.
CONFIG_SECTION_MISMATCH_WARN_ONLY=n would turn this into a fatal error.
Fixes: 05b93417ce5b ("x86/intel_rdt/mba: Add primary support for Memory Bandwidth Allocation (MBA)")
Fixes: 4d05bf71f157 ("x86/resctrl: Introduce AMD QOS feature")
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Cc: <stable@kernel.org>
Link: https://github.com/llvm/llvm-project/commit/6b11573b8c5e3d36beee099dbe7347c2a007bf53 [1]
Link: https://lore.kernel.org/r/20240917-x86-restctrl-get_mem_config_intel-init-v3-1-10d521256284@kernel.org
|
|
When using resctrl on systems with Sub-NUMA Clustering enabled, monitoring
groups may be allocated RMID values which would overrun the
arch_mbm_{local,total} arrays.
This is due to inconsistencies in whether the SNC-adjusted num_rmid value or
the unadjusted value in resctrl_arch_system_num_rmid_idx() is used. The
num_rmid value for the L3 resource is currently:
resctrl_arch_system_num_rmid_idx() / snc_nodes_per_l3_cache
As a simple fix, make resctrl_arch_system_num_rmid_idx() return the
SNC-adjusted, L3 num_rmid value on x86.
Fixes: e13db55b5a0d ("x86/resctrl: Introduce snc_nodes_per_l3_cache")
Signed-off-by: Peter Newman <peternewman@google.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Link: https://lore.kernel.org/r/20240822190212.1848788-1-peternewman@google.com
|
|
Hardware has two RMID configuration options for SNC systems. The default
mode divides RMID counters between SNC nodes. E.g. with 200 RMIDs and
two SNC nodes per L3 cache RMIDs 0..99 are used on node 0, and 100..199
on node 1. This isn't compatible with Linux resctrl usage. On this
example system a process using RMID 5 would only update monitor counters
while running on SNC node 0.
The other mode is "RMID Sharing Mode". This is enabled by clearing bit
0 of the RMID_SNC_CONFIG (0xCA0) model specific register. In this mode
the number of logical RMIDs is the number of physical RMIDs (from CPUID
leaf 0xF) divided by the number of SNC nodes per L3 cache instance. A
process can use the same RMID across different SNC nodes.
See the "Intel Resource Director Technology Architecture Specification"
for additional details.
When SNC is enabled, update the MSR when a monitor domain is marked
online. Technically this is overkill. It only needs to be done once
per L3 cache instance rather than per SNC domain. But there is no harm
in doing it more than once, and this is not in a critical path.
Signed-off-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Link: https://lore.kernel.org/r/20240702173820.90368-3-tony.luck@intel.com
|
|
When SNC is enabled, monitoring data is collected at the SNC node granularity,
but must be reported at L3-cache granularity for backwards compatibility in
addition to reporting at the node level.
Add a "ci" field to the rdt_mon_domain structure to save the cache information
about the enclosing L3 cache for the domain. This provides:
1) The cache id which is needed to compose the name of the legacy monitoring
directory, and to determine which domains should be summed to provide
L3-scoped data.
2) The shared_cpu_map which is needed to determine which CPUs can be used to
read the RMID counters with the MSR interface.
This is the first step to an eventual goal of monitor reporting files like this
(for a system with two SNC nodes per L3):
$ cd /sys/fs/resctrl/mon_data
$ tree mon_L3_00
mon_L3_00 <- 00 here is L3 cache id
├── llc_occupancy \ These files provide legacy support
├── mbm_local_bytes > for non-SNC aware monitor apps
├── mbm_total_bytes / that expect data at L3 cache level
├── mon_sub_L3_00 <- 00 here is SNC node id
│ ├── llc_occupancy \ These files are finer grained
│ ├── mbm_local_bytes > data from each SNC node
│ └── mbm_total_bytes /
└── mon_sub_L3_01
├── llc_occupancy \
├── mbm_local_bytes > As above, but for node 1.
└── mbm_total_bytes /
[ bp: Massage commit message. ]
Signed-off-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Tested-by: Babu Moger <babu.moger@amd.com>
Link: https://lore.kernel.org/r/20240628215619.76401-9-tony.luck@intel.com
|
|
Currently supported resctrl features are all domain scoped the same as the
scope of the L2 or L3 caches.
Add RESCTRL_L3_NODE as a new option for features that are scoped at the
same granularity as NUMA nodes. This is needed for Intel's Sub-NUMA
Cluster (SNC) feature where monitoring features are divided between
nodes that share an L3 cache.
Signed-off-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Tested-by: Babu Moger <babu.moger@amd.com>
Link: https://lore.kernel.org/r/20240628215619.76401-6-tony.luck@intel.com
|
|
The same rdt_domain structure is used for both control and monitor
functions. But this results in wasted memory as some of the fields are
only used by control functions, while most are only used for monitor
functions.
Split into separate rdt_ctrl_domain and rdt_mon_domain structures with
just the fields required for control and monitoring respectively.
Similar split of the rdt_hw_domain structure into rdt_hw_ctrl_domain
and rdt_hw_mon_domain.
Signed-off-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Tested-by: Babu Moger <babu.moger@amd.com>
Link: https://lore.kernel.org/r/20240628215619.76401-5-tony.luck@intel.com
|
|
Resctrl assumes that control and monitor operations on a resource are
performed at the same scope.
Prepare for systems that use different scope (specifically Intel needs
to split the RDT_RESOURCE_L3 resource to use L3 scope for cache control
and NODE scope for cache occupancy and memory bandwidth monitoring).
Create separate domain lists for control and monitor operations.
Note that errors during initialization of either control or monitor
functions on a domain would previously result in that domain being
excluded from both control and monitor operations. Now the domains are
allocated independently it is no longer required to disable both control
and monitor operations if either fail.
Signed-off-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Tested-by: Babu Moger <babu.moger@amd.com>
Link: https://lore.kernel.org/r/20240628215619.76401-4-tony.luck@intel.com
|
|
The rdt_domain structure is used for both control and monitor features.
It is about to be split into separate structures for these two usages
because the scope for control and monitoring features for a resource
will be different for future resources.
To allow for common code that scans a list of domains looking for a
specific domain id, move all the common fields ("list", "id", "cpu_mask")
into their own structure within the rdt_domain structure.
Signed-off-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Tested-by: Babu Moger <babu.moger@amd.com>
Link: https://lore.kernel.org/r/20240628215619.76401-3-tony.luck@intel.com
|
|
Resctrl resources operate on subsets of CPUs in the system with the
defining attribute of each subset being an instance of a particular
level of cache. E.g. all CPUs sharing an L3 cache would be part of the
same domain.
In preparation for features that are scoped at the NUMA node level,
change the code from explicit references to "cache_level" to a more
generic scope. At this point the only options for this scope are groups
of CPUs that share an L2 cache or L3 cache.
Clean up the error handling when looking up domains. Report invalid ids
before calling rdt_find_domain() in preparation for better messages when
scope can be other than cache scope. This means that rdt_find_domain()
will never return an error. So remove checks for error from the call sites.
Signed-off-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Tested-by: Babu Moger <babu.moger@amd.com>
Link: https://lore.kernel.org/r/20240628215619.76401-2-tony.luck@intel.com
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 resource control updates from Borislav Petkov:
- Add a tracepoint to read out LLC occupancy of resource monitor IDs
with the goal of freeing them sooner rather than later
- Other code improvements and cleanups
* tag 'x86_cache_for_v6.10_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/resctrl: Add tracepoint for llc_occupancy tracking
x86/resctrl: Rename pseudo_lock_event.h to trace.h
x86/resctrl: Simplify call convention for MSR update functions
x86/resctrl: Pass domain to target CPU
|
|
New CPU #defines encode vendor and family as well as model.
[ bp: Squash two resctrl patches into one. ]
Signed-off-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/all/20240424181514.41848-1-tony.luck%40intel.com
|
|
The per-resource MSR update functions cat_wrmsr(), mba_wrmsr_intel(),
and mba_wrmsr_amd() all take three arguments:
(struct rdt_domain *d, struct msr_param *m, struct rdt_resource *r)
struct msr_param contains pointers to both struct rdt_resource and struct
rdt_domain, thus only struct msr_param is necessary.
Pass struct msr_param as a single parameter. Clean up formatting and
fix some fir tree declaration ordering.
No functional change.
Suggested-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Reviewed-by: Babu Moger <babu.moger@amd.com>
Tested-by: Maciej Wieczor-Retman <maciej.wieczor-retman@intel.com>
Link: https://lore.kernel.org/r/20240308213846.77075-3-tony.luck@intel.com
|
|
reset_all_ctrls() and resctrl_arch_update_domains() use on_each_cpu_mask()
to call rdt_ctrl_update() on potentially one CPU from each domain.
But this means rdt_ctrl_update() needs to figure out which domain to
apply changes to. Doing so requires a search of all domains in a resource,
which can only be done safely if cpus_lock is held. Both callers do hold
this lock, but there isn't a way for a function called on another CPU
via IPI to verify this.
Commit
c0d848fcb09d ("x86/resctrl: Remove lockdep annotation that triggers
false positive")
removed the incorrect assertions.
Add the target domain to the msr_param structure and call
rdt_ctrl_update() for each domain separately using
smp_call_function_single(). This means that rdt_ctrl_update() doesn't
need to search for the domain and get_domain_from_cpu() can safely
assert that the cpus_lock is held since the remaining callers do not use
IPI.
Signed-off-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Reviewed-by: James Morse <james.morse@arm.com>
Reviewed-by: Babu Moger <babu.moger@amd.com>
Tested-by: Maciej Wieczor-Retman <maciej.wieczor-retman@intel.com>
Link: https://lore.kernel.org/r/20240308213846.77075-2-tony.luck@intel.com
|
