summaryrefslogtreecommitdiff
path: root/drivers/gpu/drm/amd/display/dc
AgeCommit message (Collapse)Author
8 daysMerge tag 'amd-drm-next-6.19-2025-12-02' of ↵Dave Airlie
https://gitlab.freedesktop.org/agd5f/linux into drm-next amd-drm-next-6.19-2025-12-02: amdgpu: - Unified MES fix - SMU 11 unbalanced irq fix - Fix for driver reloading on APUs - pp_table sysfs fix - Fix memory leak in fence handling - HDMI fix - DC cursor fixes - eDP panel parsing fix - Brightness fix - DC analog fixes - EDID retry fixes - UserQ fixes - RAS fixes - IP discovery fix - Add missing locking in amdgpu_ttm_access_memory_sdma() - Smart Power OLED fix - PRT and page fault fixes for GC 6-8 - VMID reservation fix - ACP platform device fix - Add missing vm fault handling for GC 11-12 - VPE fix amdkfd: - Partitioning fix Signed-off-by: Dave Airlie <airlied@redhat.com> From: Alex Deucher <alexander.deucher@amd.com> Link: https://patch.msgid.link/20251202220101.2039347-1-alexander.deucher@amd.com
8 daysdrm/amd/display: fix typo in display_mode_core_structs.hAditya Gollamudi
Fix a typo in a comment, change "enviroment" to "environment" in drivers/gpu/drm/amd/display/dc/dml2/display_mode_core_structs.h Fixes: e6a8a000cfe6 ("drm/amd/display: Rename dml2 to dml2_0 folder") Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by: Aditya Gollamudi <adigollamudi@gmail.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Roman Li <roman.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
8 daysdrm/amd/display: fix Smart Power OLED not working after S4Ian Chen
[HOW] Before enable smart power OLED, we need to call set pipe to let DMUB get correct ABM config. Reviewed-by: Robin Chen <robin.chen@amd.com> Signed-off-by: Ian Chen <ian.chen@amd.com> Signed-off-by: Roman Li <roman.li@amd.com> Tested-by: Dan Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
8 daysdrm/amd/display: Move RGB-type check for audio sync to DCE HW sequenceIvan Lipski
[Why&How] DVI-A & VGA connectors are applicable to DCE ASICs, so move them to dce110_hwseq.c to block audio sync on SIGNAL_TYPE_RGB for DCE ASICs. Signed-off-by: Ivan Lipski <ivan.lipski@amd.com> Reviewed-by: Harry Wentland <harry.wentland@amd.com> Tested-by: Dan Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
14 daysdrm/amd/display: Check ATOM_DEVICE_CRT2_SUPPORT in dc_load_detectionIvan Lipski
[WHY & HOW] Fix the typo of the else-if condition from ATOM_DEVICE_CRT1_SUPPORT to ATOM_DEVICE_CRT2_SUPPORT. Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Ivan Lipski <ivan.lipski@amd.com> Signed-off-by: Alex Hung <alex.hung@amd.com> Tested-by: Dan Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
14 daysdrm/amd/display: Add cursor offload abort to the new HWSS pathNicholas Kazlauskas
[HOW] If cursor attributes or position are passed into DC via a stream update and we take the newer HWSS paths then it's possible that the update races with cursor offloading if it's enabled. This can cause the cursor to remain on the screen if no further updates come in if it results in HW cursor support being disabled. [HOW] Add the abort into the HWSS path so that cursor offloading doesn't attempt to reprogram the cursor with outdated params. Cc: Mario Limonciello <mario.limonciello@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Dillon Varone <dillon.varone@amd.com> Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Signed-off-by: Alex Hung <alex.hung@amd.com> Tested-by: Dan Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
14 daysdrm/amd/display: Fix logical vs bitwise bug in get_embedded_panel_info_v2_1()Dan Carpenter
The .H_SYNC_POLARITY and .V_SYNC_POLARITY variables are 1 bit bitfields of a u32. The ATOM_HSYNC_POLARITY define is 0x2 and the ATOM_VSYNC_POLARITY is 0x4. When we do a bitwise negate of 0, 2, or 4 then the last bit is always 1 so this code always sets .H_SYNC_POLARITY and .V_SYNC_POLARITY to true. This code is instead intended to check if the ATOM_HSYNC_POLARITY or ATOM_VSYNC_POLARITY flags are set and reverse the result. In other words, it's supposed to be a logical negate instead of a bitwise negate. Fixes: ae79c310b1a6 ("drm/amd/display: Add DCE12 bios parser support") Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org> Reviewed-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
14 daysdrm/amd/display: Check NULL before accessingAlex Hung
[WHAT] IGT kms_cursor_legacy's long-nonblocking-modeset-vs-cursor-atomic fails with NULL pointer dereference. This can be reproduced with both an eDP panel and a DP monitors connected. BUG: kernel NULL pointer dereference, address: 0000000000000000 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page PGD 0 P4D 0 Oops: Oops: 0000 [#1] SMP NOPTI CPU: 13 UID: 0 PID: 2960 Comm: kms_cursor_lega Not tainted 6.16.0-99-custom #8 PREEMPT(voluntary) Hardware name: AMD ........ RIP: 0010:dc_stream_get_scanoutpos+0x34/0x130 [amdgpu] Code: 57 4d 89 c7 41 56 49 89 ce 41 55 49 89 d5 41 54 49 89 fc 53 48 83 ec 18 48 8b 87 a0 64 00 00 48 89 75 d0 48 c7 c6 e0 41 30 c2 <48> 8b 38 48 8b 9f 68 06 00 00 e8 8d d7 fd ff 31 c0 48 81 c3 e0 02 RSP: 0018:ffffd0f3c2bd7608 EFLAGS: 00010292 RAX: 0000000000000000 RBX: 0000000000000000 RCX: ffffd0f3c2bd7668 RDX: ffffd0f3c2bd7664 RSI: ffffffffc23041e0 RDI: ffff8b32494b8000 RBP: ffffd0f3c2bd7648 R08: ffffd0f3c2bd766c R09: ffffd0f3c2bd7760 R10: ffffd0f3c2bd7820 R11: 0000000000000000 R12: ffff8b32494b8000 R13: ffffd0f3c2bd7664 R14: ffffd0f3c2bd7668 R15: ffffd0f3c2bd766c FS: 000071f631b68700(0000) GS:ffff8b399f114000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000000 CR3: 00000001b8105000 CR4: 0000000000f50ef0 PKRU: 55555554 Call Trace: <TASK> dm_crtc_get_scanoutpos+0xd7/0x180 [amdgpu] amdgpu_display_get_crtc_scanoutpos+0x86/0x1c0 [amdgpu] ? __pfx_amdgpu_crtc_get_scanout_position+0x10/0x10[amdgpu] amdgpu_crtc_get_scanout_position+0x27/0x50 [amdgpu] drm_crtc_vblank_helper_get_vblank_timestamp_internal+0xf7/0x400 drm_crtc_vblank_helper_get_vblank_timestamp+0x1c/0x30 drm_crtc_get_last_vbltimestamp+0x55/0x90 drm_crtc_next_vblank_start+0x45/0xa0 drm_atomic_helper_wait_for_fences+0x81/0x1f0 ... Cc: Mario Limonciello <mario.limonciello@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
14 daysRevert "drm/amd/display: Move setup_stream_attribute"Alex Deucher
This reverts commit 2681bf4ae8d24df950138b8c9ea9c271cd62e414. This results in a blank screen on the HDMI port on some systems. Revert for now so as not to regress 6.18, can be addressed in 6.19 once the issue is root caused. Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/4652 Cc: Sunpeng.Li@amd.com Cc: ivan.lipski@amd.com Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-11-21Merge tag 'v6.18-rc6' into drm-nextDave Airlie
Linux 6.18-rc6 Backmerge in order to merge msm next Signed-off-by: Dave Airlie <airlied@redhat.com>
2025-11-18drm/amd/display: Move analog check to dce110_hwseqTimur Kristóf
Instead of checking that the signal is analog before calling the HWSS disable_audio_stream() function to disable audio, move the check inside the HWSS function. Suggested-by: Ray Wu <Ray.Wu@amd.com> Signed-off-by: Timur Kristóf <timur.kristof@gmail.com> Reviewed-by: Harry Wentland <harry.wentland@amd.com> Link: https://lore.kernel.org/r/20251113163348.137315-5-timur.kristof@gmail.com Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-11-18drm/amd/display: Cleanup early return in construct_phyTimur Kristóf
Match pre-existing patterns in the DC code base. Instead of returning early from the construct_phy() function, add a label at the end and use goto to jump there. Additionally, respect the DC logger and let it log the function even when it returns early. Suggested-by: Ray Wu <Ray.Wu@amd.com> Signed-off-by: Timur Kristóf <timur.kristof@gmail.com> Reviewed-by: Harry Wentland <harry.wentland@amd.com> Link: https://lore.kernel.org/r/20251113163348.137315-4-timur.kristof@gmail.com Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-11-18drm/amd/display: Cleanup uses of the analog flagTimur Kristóf
In the detect_link_and_local_sink() function, do not modify the EDID capabilities of the display based on the connector. Instead, respect the analog flag better and when the analog flag is set, check that the connector indeed supports analog displays. Suggested-by: Ray Wu <Ray.Wu@amd.com> Signed-off-by: Timur Kristóf <timur.kristof@gmail.com> Reviewed-by: Harry Wentland <harry.wentland@amd.com> Link: https://lore.kernel.org/r/20251113163348.137315-3-timur.kristof@gmail.com Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-11-18drm/amd/display: Fix warning for analog stream encodersTimur Kristóf
Fixes the following warning that some users are reporting with some kernel configurations: "positional initialization of field in 'struct' declared with 'designated_init' attribute" Signed-off-by: Timur Kristóf <timur.kristof@gmail.com> Reviewed-by: Harry Wentland <harry.wentland@amd.com> Acked-by: Kees Cook <kees@kernel.org> Link: https://lore.kernel.org/r/20251113163348.137315-2-timur.kristof@gmail.com Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-11-18drm/amd/display: dc_hw_sequencer.c: remove kernel-doc commentsRandy Dunlap
Change comments from kernel-doc style "/**" to normal C comments "/*" since the comments are not in kernel-doc format. This fixes around 39 kernel-doc warnings like this one: drivers/gpu/drm/amd/display/dc/core/dc_hw_sequencer.c:1322: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst Reported-by: kernel test robot <lkp@intel.com> Closes: https://lore.kernel.org/oe-kbuild-all/202511062036.Ry8Z2APc-lkp@intel.com/ Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-11-18drm/amd/display: Promote DC to 3.2.359Taimur Hassan
This version brings along the following updates: - Add interface to capture expected HW state from SW state - Add panel Replay capability detection, DPCD reading, and enablement logic - Re-check seamless boot enablement on subsequent dc_commit_streams - Improve DPCD link capability retrieval with increased retries and per-retry delays - Add HPD filter for HDMI - Add pipe topology history tracking to DC - Fix MST initialization on resume when switching from SST to MST during suspend - Fix double cursor on DCN20 & DCN30 in non-native scaling - Check DCCG_AUDIO_DTO2 register mask before access - Fix pbn to kbps conversion Reviewed-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Taimur Hassan <Syed.Hassan@amd.com> Signed-off-by: Ivan Lipski <ivan.lipski@amd.com> Tested-by: Dan Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-11-18drm/amd/display: Check DCCG_AUDIO_DTO2 register mask existCharlene Liu
[Why&How] Check DCCG_AUDIO_DTO2 register mask exist before access. Also, add a existing DIO_CLOCK_control register for later use. Reviewed-by: Roman Li <roman.li@amd.com> Signed-off-by: Charlene Liu <Charlene.Liu@amd.com> Signed-off-by: Ivan Lipski <ivan.lipski@amd.com> Tested-by: Dan Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-11-18drm/amd/display: Add null pointer check in link_dpmsCharlene Liu
[why] Check that the stream exists to add link->local_sink null pointer access protection. Reviewed-by: Harold Sun <harold.sun@amd.com> Reviewed-by: Ethan Cheung <ethan.cheung@amd.com> Signed-off-by: Charlene Liu <Charlene.Liu@amd.com> Signed-off-by: Ivan Lipski <ivan.lipski@amd.com> Tested-by: Dan Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-11-18drm/amd/display: Clear the CUR_ENABLE register on DCN20 on DPP5Ivan Lipski
[Why] On DCN20 & DCN30, the 6th DPP's & HUBP's are powered on permanently and cannot be power gated. Thus, when dpp_reset() is invoked for the DPP5, while it's still powered on, the cached cursor_state (dpp_base->pos.cur0_ctl.bits.cur0_enable) and the actual state (CUR0_ENABLE) bit are unsycned. This can cause a double cursor in full screen with non-native scaling. [How] Force disable cursor on DPP5 on plane powerdown for ASICs w/ 6 DPPs/HUBPs. Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/4673 Reviewed-by: Aric Cyr <aric.cyr@amd.com> Signed-off-by: Ivan Lipski <ivan.lipski@amd.com> Tested-by: Dan Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-11-18drm/amd/display: Add pipe topology history to dcNicholas Carbones
[Why] There is no way to check pipe topology update history through a dump. [How] Add a topology history structure to dc with snapshots of the most recent pipe topology updates. Reviewed-by: George Shen <george.shen@amd.com> Signed-off-by: Nicholas Carbones <ncarbone@amd.com> Signed-off-by: Ivan Lipski <ivan.lipski@amd.com> Tested-by: Dan Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-11-18drm/amd/display: Increase DPCD read retriesMario Limonciello (AMD)
[Why] Empirical measurement of some monitors that fail to read EDID while booting shows that the number of retries with a 30ms delay between tries is as high as 16. [How] Increase number of retries to 20. Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/4672 Reviewed-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Mario Limonciello (AMD) <superm1@kernel.org> Signed-off-by: Ivan Lipski <ivan.lipski@amd.com> Tested-by: Dan Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-11-18drm/amd/display: Move sleep into each retry for retrieve_link_cap()Mario Limonciello (AMD)
[Why] When a monitor is booting it's possible that it isn't ready to retrieve link caps and this can lead to an EDID read failure: ``` [drm:retrieve_link_cap [amdgpu]] *ERROR* retrieve_link_cap: Read receiver caps dpcd data failed. amdgpu 0000:c5:00.0: [drm] *ERROR* No EDID read. ``` [How] Rather than msleep once and try a few times, msleep each time. Should be no changes for existing working monitors, but should correct reading caps on a monitor that is slow to boot. Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/4672 Reviewed-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Mario Limonciello (AMD) <superm1@kernel.org> Signed-off-by: Ivan Lipski <ivan.lipski@amd.com> Tested-by: Dan Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-11-18drm/amd/display: Re-check seamless boot can be enabled or notPaul Hsieh
[Why] If the seamless boot feature has already been enabled, and dc_commit_streams is called again before receiving a flip, the driver will adjust the engine clock without turning off the screen, which will cause garbage to occur. However, in reality, the Pixel Clock from the first dc_commit_streams and the second dc_commit_streams are different. [How] If the apply seamless boot flag in the previous stream has not been cleared, and dc_commit_streams is received again, we need to recheck whether seamless boot should be disabled Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Signed-off-by: Paul Hsieh <Paul.Hsieh@amd.com> Signed-off-by: Ivan Lipski <ivan.lipski@amd.com> Tested-by: Dan Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-11-18drm/amd/display: Get panel replay capability from DPCDJack Chang
[Why&How] Read Panel replay caps from DPCD when retrieving link capability Reviewed-by: Robin Chen <robin.chen@amd.com> Signed-off-by: Jack Chang <jack.chang@amd.com> Signed-off-by: Leon Huang <Leon.Huang1@amd.com> Signed-off-by: Ivan Lipski <ivan.lipski@amd.com> Tested-by: Dan Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-11-18drm/amd/display: Add panel replay enablement option and logicJack Chang
[Why&How] 1.Add flow to enable and configure panel replay enablement and configuration 2.Add registry key for enable option 3.Add replay version check to be compatible with freesync replay 4.Add AC/DC switch function to notify ac/dc change. 5.Add flow in set event function to check and decide Replay enable/disable Reviewed-by: Robin Chen <robin.chen@amd.com> Signed-off-by: Jack Chang <jack.chang@amd.com> Signed-off-by: Leon Huang <Leon.Huang1@amd.com> Signed-off-by: Ivan Lipski <ivan.lipski@amd.com> Tested-by: Dan Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-11-18drm/amd/display: Add panel replay capability detectionJack Chang
[Why&How] For supporting VESA PR, add flow to determine the support capability Reviewed-by: Robin Chen <robin.chen@amd.com> Signed-off-by: Jack Chang <jack.chang@amd.com> Signed-off-by: Leon Huang <Leon.Huang1@amd.com> Signed-off-by: Ivan Lipski <ivan.lipski@amd.com> Tested-by: Dan Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-11-18drm/amd/display: Add interface to capture expected HW state from SW stateGeorge Shen
[Why] To debug certain issues, such as underflow, it is common practice to dump the HW state of all registers for analysis. The first thing to check with the dump is to ensure all values are programmed as expected according to SW state. [How] Add interface to DC to capture expected HW register values based on SW state. Reviewed-by: Dillon Varone <dillon.varone@amd.com> Signed-off-by: George Shen <george.shen@amd.com> Signed-off-by: Ivan Lipski <ivan.lipski@amd.com> Tested-by: Dan Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-11-11drm/amd/display: Add kdoc params/returns in dc/link detection helpersSrinivasan Shanmugam
The link detection helpers in dc/link/link_detection.c were missing kdoc annotations for parameters and return values. Fixes the below with gcc W=1: ...link_detection.c:872 parameter 'edid_header' not described ...link_detection.c:890 parameter 'link' not described ...link_detection.c:914 parameter 'link' not described ...link_detection.c:1355 parameter 'link' not described ...link_detection.c:1355 parameter 'type' not described Cc: Aurabindo Pillai <aurabindo.pillai@amd.com> Cc: Roman Li <roman.li@amd.com> Cc: Harry Wentland <harry.wentland@amd.com> Cc: Tom Chung <chiahsuan.chung@amd.com> Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com> Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-11-11drm/amd/display: Promote DC to 3.2.358Taimur Hassan
Summary: * Enable VRR when unsynced with the stream * Refactor DSC cap calculation for dcn35 * Add debug log for power feature * Fix fill latency issue * Do not initialize LSDMA if it is not supported by DMU Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by: Taimur Hassan <Syed.Hassan@amd.com> Signed-off-by: Fangzhi Zuo <jerry.zuo@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-11-11drm/amd/display: dynamically clock gate before and after prefetchLeo Chen
[Why] An invalidation request arriving during prefetch can potentially hang the system if dynamic clock gating is enabled and memory power requests are disabled. [How] • Disable clock gating and enable memory power requests for the duration of the prefetch. • Turn on clock gating and disable memory power requests again after prefetch is complete. Limit the scope for DCN35 and DCN42 only. Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Signed-off-by: Leo Chen <leo.chen@amd.com> Signed-off-by: Fangzhi Zuo <jerry.zuo@amd.com> Tested-by: Dan Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-11-11drm/amd/display: Revert in_transfer_func_change to MEDDominik Kaszewski
[Why] Last commit accidentally changed handling of in_transfer_func_change from MED to FAST. [How] * Revert the line. Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Signed-off-by: Dominik Kaszewski <dominik.kaszewski@amd.com> Signed-off-by: Fangzhi Zuo <jerry.zuo@amd.com> Tested-by: Dan Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-11-11drm/amd/display: To support Replay frame skip modeChuntao Tso
[Why & How] The change is to optimize the Replay power saving by reducing the refresh rate with frame skipping mode Reviewed-by: Robin Chen <robin.chen@amd.com> Signed-off-by: Chuntao Tso <chunttso@amd.com> Signed-off-by: Fangzhi Zuo <jerry.zuo@amd.com> Tested-by: Dan Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-11-11drm/amd/display: Change lock descriptor valuesDominik Kaszewski
[Why] Review of usage scenarios requires dc_lock_descriptor modification. [How] Replace STATE/LINK/STREAM/PLANE with GLOBAL/STREAM/LINK, where the first means all streams to be locked. Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Signed-off-by: Dominik Kaszewski <dominik.kaszewski@amd.com> Signed-off-by: Fangzhi Zuo <jerry.zuo@amd.com> Tested-by: Dan Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-11-11drm/amd/display: refactor DSC cap calculation for dcn35Mohit Bawa
why: dcn35 currently uses a hardcoded DSC display clock value which is incorrect for some asic types. Newer DCN versions retrieve dsc display clock from clk_mgr. The same can be done for dcn35. how: Refactor the DSC cap calculation using pre-existing logic. Handle ODM combine requirements in dc_dsc.c. Replace hardcoded display clock with actual value retrieved from clk_mgr. Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Reviewed-by: Charlene Liu <charlene.liu@amd.com> Reviewed-by: Wenjing Liu <wenjing.liu@amd.com> Signed-off-by: Mohit Bawa <Mohit.Bawa@amd.com> Signed-off-by: Fangzhi Zuo <jerry.zuo@amd.com> Tested-by: Dan Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-11-11drm/amd/display: Add new SMART POWER OLED interfacesIan Chen
[why && how] To optimize power consumption on certain OLED LED panels by sending MaxCLL per frame to TCON Reviewed-by: Aric Cyr <aric.cyr@amd.com> Signed-off-by: Ian Chen <ian.chen@amd.com> Signed-off-by: Fangzhi Zuo <jerry.zuo@amd.com> Tested-by: Dan Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-11-11drm/amd/display: Add interface to capture power feature status for debug loggingGeorge Shen
[Why] The status of various power features is often important information when debugging certain issues, such as underflow. This info helps to narrow down the potential sources of errors. [How] Add dc interface to capture power feature enablement status. Reviewed-by: Dillon Varone <dillon.varone@amd.com> Signed-off-by: George Shen <george.shen@amd.com> Signed-off-by: Fangzhi Zuo <jerry.zuo@amd.com> Tested-by: Dan Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-11-11drm/amd/display: Fix index bug for fill latencyDillon Varone
[WHY&HOW] This array should be indexed by pstate type followed by plane index. Reviewed-by: Austin Zheng <austin.zheng@amd.com> Signed-off-by: Dillon Varone <Dillon.Varone@amd.com> Signed-off-by: Fangzhi Zuo <jerry.zuo@amd.com> Tested-by: Dan Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-11-11drm/amd/display: Only initialize LSDMA if it is supported in DMUAlvin Lee
Need to check caps flag to determine whether LSDMA is supported in DMU Reviewed-by: Rafal Ostrowski <rafal.ostrowski@amd.com> Signed-off-by: Alvin Lee <Alvin.Lee2@amd.com> Signed-off-by: Fangzhi Zuo <jerry.zuo@amd.com> Tested-by: Dan Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-11-04drm/amd/display: Fix black screen with HDMI outputsAlex Hung
[Why & How] This fixes the black screen issue on certain APUs with HDMI, accompanied by the following messages: amdgpu 0000:c4:00.0: amdgpu: [drm] Failed to setup vendor info frame on connector DP-1: -22 amdgpu 0000:c4:00.0: [drm] Cannot find any crtc or sizes [drm] Cannot find any crtc or sizes Fixes: 489f0f600ce2 ("drm/amd/display: Fix DVI-D/HDMI adapters") Suggested-by: Timur Kristóf <timur.kristof@gmail.com> Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Ray Wu <ray.wu@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> (cherry picked from commit 678c901443a6d2e909e3b51331a20f9d8f84ce82)
2025-11-04drm/amd/display: Promote DC to 3.2.357Taimur Hassan
This version brings along following update: - HDCP2 FW locality check refactors - Fix black screen issue with HDMI output - Increase IB mem size - Revert max buffered cursor size to 64 - Extend inbox0 lock to run Replay / PSR - Refactor VActive implementation - Add Pstate viewport reduction - Persist stream refcount through restore Acked-by: Wayne Lin <Wayne.Lin@amd.com> Signed-off-by: Taimur Hassan <Syed.Hassan@amd.com> Signed-off-by: Ray Wu <ray.wu@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-11-04drm/amd/display: Fix black screen with HDMI outputsAlex Hung
[Why & How] This fixes the black screen issue on certain APUs with HDMI, accompanied by the following messages: amdgpu 0000:c4:00.0: amdgpu: [drm] Failed to setup vendor info frame on connector DP-1: -22 amdgpu 0000:c4:00.0: [drm] Cannot find any crtc or sizes [drm] Cannot find any crtc or sizes Fixes: 489f0f600ce2 ("drm/amd/display: Fix DVI-D/HDMI adapters") Suggested-by: Timur Kristóf <timur.kristof@gmail.com> Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Ray Wu <ray.wu@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-11-04drm/amd/display: Revert DCN4 max buffered cursor size to 64Dillon Varone
[Why & How] The buffered cursor cap is expressed assuming a square cursor, and usage of the cursor buffer is limited by the request size. For greater than 32 pixels, the request size is fixed at 256 bytes, so the maximum width must be floored to the nearest 256th byte. At 4bpp this means even with 24kB DCN4 can only hold a 64x64 cursor in the buffer as even 65 pixels would require 512 bytes per line instead of 256. Reviewed-by: Alvin Lee <alvin.lee2@amd.com> Signed-off-by: Dillon Varone <Dillon.Varone@amd.com> Signed-off-by: Ray Wu <ray.wu@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-11-04drm/amd/display: Persist stream refcount through restoreJoshua Aberback
[Why & How] Overwriting the refcount on stream restore can lead to double-free errors or memory leaks if an unbalanced number of retains and releases occurs between a backup and restore. Reviewed-by: Dillon Varone <dillon.varone@amd.com> Signed-off-by: Joshua Aberback <joshua.aberback@amd.com> Signed-off-by: Ray Wu <ray.wu@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-11-04drm/amd/display: Add Pstate viewport reductionAustin Zheng
[Why/How] Add struct to hold calculated reduced viewport pstate recout reduction lines per plane Reviewed-by: Dillon Varone <dillon.varone@amd.com> Signed-off-by: Austin Zheng <Austin.Zheng@amd.com> Signed-off-by: Ray Wu <ray.wu@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-11-04drm/amd/display: Refactor VActive implementationAustin Zheng
[Why & How] Refactors VActive accounting in PMO, and breaks down fill time requirement by P-State type as it can result in drasitcally different bandwidth requirements depending on the blackout length. Reviewed-by: Dillon Varone <dillon.varone@amd.com> Signed-off-by: Austin Zheng <Austin.Zheng@amd.com> Signed-off-by: Ray Wu <ray.wu@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-11-04drm/amd/display: Update P-state naming for clarity.Austin Zheng
[Why & How] P-state can refer to different things like UCLK P-state, PPT, or temp read Update naming for clarity Reviewed-by: Dillon Varone <dillon.varone@amd.com> Signed-off-by: Austin Zheng <Austin.Zheng@amd.com> Signed-off-by: Ray Wu <ray.wu@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-11-04drm/amd/display: Remove old PMO optionsAustin Zheng
[Why & How] Removes deprecated or unused PMO options. Reviewed-by: Dillon Varone <dillon.varone@amd.com> Signed-off-by: Austin Zheng <Austin.Zheng@amd.com> Signed-off-by: Ray Wu <ray.wu@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-11-04drm/amd/display: Add pte_buffer_mode and force_one_row_for_frame in dchub regAustin Zheng
[Why & How] Update structs for rq regs Reviewed-by: Dillon Varone <dillon.varone@amd.com> Signed-off-by: Austin Zheng <Austin.Zheng@amd.com> Signed-off-by: Ray Wu <ray.wu@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-11-04drm/amd/display: Extend inbox0 lock to run Replay/PSRAndrew Mazour
[Why] The inbox1 infrastructure is deprecated, so to support display power features requiring a DMUB interlock moving forward extend the inbox0 locking conditions to also include Replay or PSR. [How] Implemented a series of changes to improve HW lock handling: - Deprecated should_use_dmub_inbox1_lock() and guarded it with DCN401 flag. - Migrated lock checks into inbox0 helpers and added PSR/Replay enablement checks to ensure correct behavior. - Updated HWSS fast update path to acquire HW lock as needed using the new helpers. Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Signed-off-by: Andrew Mazour <Andrew.Mazour@amd.com> Signed-off-by: Ray Wu <ray.wu@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-11-04drm/amd/display: remove unneeded semicolonJiapeng Chong
No functional modification involved. ./drivers/gpu/drm/amd/display/dc/resource/dcn32/dcn32_resource.c:1850:3-4: Unneeded semicolon. Reported-by: Abaci Robot <abaci@linux.alibaba.com> Closes: https://bugzilla.openanolis.cn/show_bug.cgi?id=26821 Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
generated by cgit v1.2.3 (git 2.46.0) at 2025-12-10 11:51:35 +0000