summaryrefslogtreecommitdiff
path: root/drivers/gpu/drm/bridge/analogix
AgeCommit message (Collapse)Author
2025-10-02Merge tag 'drm-next-2025-10-01' of https://gitlab.freedesktop.org/drm/kernelLinus Torvalds
Pull drm updates from Dave Airlie: "cross-subsystem: - i2c-hid: Make elan touch controllers power on after panel is enabled - dt bindings for STM32MP25 SoC - pci vgaarb: use screen_info helpers - rust pin-init updates - add MEI driver for late binding firmware update/load uapi: - add ioctl for reassigning GEM handles - provide boot_display attribute on boot-up devices core: - document DRM_MODE_PAGE_FLIP_EVENT - add vendor specific recovery method to drm device wedged uevent gem: - Simplify gpuvm locking ttm: - add interface to populate buffers sched: - Fix race condition in trace code atomic: - Reallow no-op async page flips display: - dp: Fix command length video: - Improve pixel-format handling for struct screen_info rust: - drop Opaque<> from ioctl args - Alloc: - BorrowedPage type and AsPageIter traits - Implement Vmalloc::to_page() and VmallocPageIter - DMA/Scatterlist: - Add dma::DataDirection and type alias for dma_addr_t - Abstraction for struct scatterlist and sg_table - DRM: - simplify use of generics - add DriverFile type alias - drop Object::SIZE - Rust: - pin-init tree merge - Various methods for AsBytes and FromBytes traits gpuvm: - Support madvice in Xe driver gpusvm: - fix hmm_pfn_to_map_order usage in gpusvm bridge: - Improve and fix ref counting on bridge management - cdns-dsi: Various improvements to mode setting - Support Solomon SSD2825 plus DT bindings - Support Waveshare DSI2DPI plus DT bindings - Support Content Protection property - display-connector: Improve DP display detection - Add support for Radxa Ra620 plus DT bindings - adv7511: Provide SPD and HDMI infoframes - it6505: Replace crypto_shash with sha() - synopsys: Add support for DW DPTX Controller plus DT bindings - adv7511: Write full Audio infoframe - ite6263: Support vendor-specific infoframes - simple: Add support for Realtek RTD2171 DP-to-HDMI plus DT bindings panel: - panel-edp: Support mt8189 Chromebooks; Support BOE NV140WUM-N64; Support SHP LQ134Z1; Fixes - panel-simple: Support Olimex LCD-OLinuXino-5CTS plus DT bindings - Support Samsung AMS561RA01 - Support Hydis HV101HD1 plus DT bindings - ilitek-ili9881c: Refactor mode setting; Add support for Bestar BSD1218-A101KL68 LCD plus DT bindings - lvds: Add support for Ampire AMP19201200B5TZQW-T03 to DT bindings - edp: Add support for additonal mt8189 Chromebook panels - lvds: Add DT bindings for EDT ETML0700Z8DHA amdgpu: - add CRIU support for gem objects - RAS updates - VCN SRAM load fixes - EDID read fixes - eDP ALPM support - Documentation updates - Rework PTE flag generation - DCE6 fixes - VCN devcoredump cleanup - MMHUB client id fixes - VCN 5.0.1 RAS support - SMU 13.0.x updates - Expanded PCIe DPC support - Expanded VCN reset support - VPE per queue reset support - give kernel jobs unique id for tracing - pre-populate exported buffers - cyan skillfish updates - make vbios build number available in sysfs - userq updates - HDCP updates - support MMIO remap page as ttm pool - JPEG parser updates - DCE6 DC updates - use devm for i2c buses - GPUVM locking updates - Drop non-DC DCE11 code - improve fallback handling for pixel encoding amdkfd: - SVM/page migration fixes - debugfs fixes - add CRIO support for gem objects - SVM updates radeon: - use dev_warn_once in CS parsers xe: - add madvise interface - add DRM_IOCTL_XE_VM_QUERY_MEMORY_RANGE_ATTRS to query VMA count and memory attributes - drop L# bank mask reporting from media GT3 on Xe3+. - add SLPC power_profile sysfs interface - add configs attribs to add post/mid context-switch commands - handle firmware reported hardware errors notifying userspace with device wedged uevent - use same dir structure across sysfs/debugfs - cleanup and future proof vram region init - add G-states and PCI link states to debugfs - Add SRIOV support for CCS surfaces on Xe2+ - Enable SRIOV PF mode by default on supported platforms - move flush to common code - extended core workarounds for Xe2/3 - use DRM scheduler for delayed GT TLB invalidations - configs improvements and allow VF device enablement - prep work to expose mmio regions to userspace - VF migration support added - prepare GPU SVM for THP migration - start fixing XE_PAGE_SIZE vs PAGE_SIZE - add PSMI support for hw validation - resize VF bars to max possible size according to number of VFs - Ensure GT is in C0 during resume - pre-populate exported buffers - replace xe_hmm with gpusvm - add more SVM GT stats to debugfs - improve fake pci and WA kunnit handle for new platform testing - Test GuC to GuC comms to add debugging - use attribute groups to simplify sysfs registration - add Late Binding firmware code to interact with MEI i915: - apply multiple JSL/EHL/Gen7/Gen6 workarounds properly - protect against overflow in active_engine() - Use try_cmpxchg64() in __active_lookup() - include GuC registers in error state - get rid of dev->struct_mutex - iopoll: generalize read_poll_timout - lots more display refactoring - Reject HBR3 in any eDP Panel - Prune modes for YUV420 - Display Wa fix, additions, and updates - DP: Fix 2.7 Gbps link training on g4x - DP: Adjust the idle pattern handling - DP: Shuffle the link training code a bit - Don't set/read the DSI C clock divider on GLK - Enable_psr kernel parameter changes - Type-C enabled/disconnected dp-alt sink - Wildcat Lake enabling - DP HDR updates - DRAM detection - wait PSR idle on dsb commit - Remove FBC modulo 4 restriction for ADL-P+ - panic: refactor framebuffer allocation habanalabs: - debug/visibility improvements - vmalloc-backed coherent mmap support - HLDIO infrastructure nova-core: - various register!() macro improvements - minor vbios/firmware fixes/refactoring - advance firmware boot stages; process Booter and patch signatures - process GSP and GSP bootloader - Add r570.144 firmware bindings and update to it - Move GSP boot code to own module - Use new pin-init features to store driver's private data in a single allocation - Update ARef import from sync::aref nova-drm: - Update ARef import from sync::aref tyr: - initial driver skeleton for a rust driver for ARM Mali GPUs - capable of powering up, query metadata and provide it to userspace. msm: - GPU and Core: - in DT bindings describe clocks per GPU type - GMU bandwidth voting for x1-85 - a623/a663 speedbins - cleanup some remaining no-iommu leftovers after VM_BIND conversion - fix GEM obj 32b size truncation - add missing VM_BIND param validation - IFPC for x1-85 and a750 - register xml and gen_header.py sync from mesa - Display: - add missing bindings for display on SC8180X - added DisplayPort MST bindings - conversion from round_rate() to determine_rate() amdxdna: - add IOCTL_AMDXDNA_GET_ARRAY - support user space allocated buffers - streamline PM interfaces - Refactoring wrt. hardware contexts - improve error reporting nouveau: - use GSP firmware by default - improve error reporting - Pre-populate exported buffers ast: - Clean up detection of DRAM config exynos: - add DSIM bridge driver support for Exynos7870 - Document Exynos7870 DSIM compatible in dt-binding panthor: - Print task/pid on errors - Add support for Mali G710, G510, G310, Gx15, Gx20, Gx25 - Improve cache flushing - Fail VM bind if BO has offset renesas: - convert to RUNTIME_PM_OPS rcar-du: - Make number of lanes configurable - Use RUNTIME_PM_OPS - Add support for DSI commands rocket: - Add driver for Rockchip NPU plus DT bindings - Use kfree() and sizeof() correctly - Test DMA status rockchip: - dsi2: Add support for RK3576 plus DT bindings - Add support for RK3588 DPTX output tidss: - Use crtc_ fields for programming display mode - Remove other drivers from aperture pixpaper: - Add support for Mayqueen Pixpaper plus DT bindings v3d: - Support querying nubmer of GPU resets for KHR_robustness stm: - Clean up logging - ltdc: Add support support for STM32MP257F-EV1 plus DT bindings sitronix: - st7571-i2c: Add support for inverted displays and 2-bit grayscale tidss: - Convert to kernel's FIELD_ macros vesadrm: - Support 8-bit palette mode imagination: - Improve power management - Add support for TH1520 GPU - Support Risc-V architectures v3d: - Improve job management and locking vkms: - Support variants of ARGB8888, ARGB16161616, RGB565, RGB888 and P01x - Spport YUV with 16-bit components" * tag 'drm-next-2025-10-01' of https://gitlab.freedesktop.org/drm/kernel: (1455 commits) drm/amd: Add name to modes from amdgpu_connector_add_common_modes() drm/amd: Drop some common modes from amdgpu_connector_add_common_modes() drm/amdgpu: update MODULE_PARM_DESC for freesync_video drm/amd: Use dynamic array size declaration for amdgpu_connector_add_common_modes() drm/amd/display: Share dce100_validate_global with DCE6-8 drm/amd/display: Share dce100_validate_bandwidth with DCE6-8 drm/amdgpu: Fix fence signaling race condition in userqueue amd/amdkfd: enhance kfd process check in switch partition amd/amdkfd: resolve a race in amdgpu_amdkfd_device_fini_sw drm/amd/display: Reject modes with too high pixel clock on DCE6-10 drm/amd: Drop unnecessary check in amdgpu_connector_add_common_modes() drm/amd/display: Only enable common modes for eDP and LVDS drm/amdgpu: remove the redeclaration of variable i drm/amdgpu/userq: assign an error code for invalid userq va drm/amdgpu: revert "rework reserved VMID handling" v2 drm/amdgpu: remove leftover from enforcing isolation by VMID drm/amdgpu: Add fallback to pipe reset if KCQ ring reset fails accel/habanalabs: add Infineon version check accel/habanalabs/gaudi2: read preboot status after recovering from dirty state accel/habanalabs: add HL_GET_P_STATE passthrough type ...
2025-09-15drm: bridge: anx7625: Fix NULL pointer dereference with early IRQLoic Poulain
If the interrupt occurs before resource initialization is complete, the interrupt handler/worker may access uninitialized data such as the I2C tcpc_client device, potentially leading to NULL pointer dereference. Signed-off-by: Loic Poulain <loic.poulain@oss.qualcomm.com> Fixes: 8bdfc5dae4e3 ("drm/bridge: anx7625: Add anx7625 MIPI DSI/DPI to DP") Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com> Link: https://lore.kernel.org/r/20250709085438.56188-1-loic.poulain@oss.qualcomm.com Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
2025-09-15Merge tag 'v6.17-rc6' into drm-nextDave Airlie
This is a backmerge of Linux 6.17-rc6, needed for msm, also requested by misc. Signed-off-by: Dave Airlie <airlied@redhat.com>
2025-08-20drm/bridge: anx7625: register content protect propertyHsin-Yi Wang
Set the `support_hdcp` bit to enable the connector to register content protection during initialization. Signed-off-by: Hsin-Yi Wang <hsinyi@chromium.org> Reviewed-by: Sean Paul <seanpaul@chromium.org> Signed-off-by: Fei Shao <fshao@chromium.org> Signed-off-by: Douglas Anderson <dianders@chromium.org> Link: https://lore.kernel.org/r/20250812082135.3351172-3-fshao@chromium.org
2025-08-15drm/bridge: analogix_dp: Fix bailout for devm_drm_bridge_alloc()Liu Ying
devm_drm_bridge_alloc() returns ERR_PTR on failure instead of a NULL pointer, so use IS_ERR() to check the returned pointer. While at it, on failure, return ERR_CAST(dp) instead of ERR_PTR(-ENOMEM) in order not to depend on devm_drm_bridge_alloc() error code implementation. Fixes: 48f05c3b4b70 ("drm/bridge: analogix_dp: Use devm_drm_bridge_alloc() API") Signed-off-by: Liu Ying <victor.liu@nxp.com> Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com> Link: https://lore.kernel.org/r/20250806095224.527938-1-victor.liu@nxp.com
2025-07-14drm/bridge: Pass down connector to drm bridge detect hookAndy Yan
In some application scenarios, we hope to get the corresponding connector when the bridge's detect hook is invoked. In most cases, we can get the connector by drm_atomic_get_connector_for_encoder if the encoder attached to the bridge is enabled, however there will still be some scenarios where the detect hook of the bridge is called but the corresponding encoder has not been enabled yet. For instance, this occurs when the device is hot plug in for the first time. Since the call to bridge's detect is initiated by the connector, passing down the corresponding connector directly will make things simpler. Signed-off-by: Andy Yan <andy.yan@rock-chips.com> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com> Link: https://lore.kernel.org/r/20250703125027.311109-3-andyshrk@163.com [DB: added the chunk to the cdn-dp driver] Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
2025-07-07drm/bridge: analogix_dp: Use devm_drm_bridge_alloc() APIMarek Szyprowski
devm_drm_bridge_alloc() is the new API to be used for allocating (and partially initializing) a private driver struct embedding a struct drm_bridge. Analogix DP driver somehow missed the automated conversion in commit 9c399719cfb9 ("drm: convert many bridge drivers from devm_kzalloc() to devm_drm_bridge_alloc() API"), what causes the following warning: ------------[ cut here ]------------ WARNING: lib/refcount.c:25 at drm_bridge_attach+0x2c/0x248, CPU#1: kworker/u8:1/34 refcount_t: addition on 0; use-after-free. Modules linked in: CPU: 1 UID: 0 PID: 34 Comm: kworker/u8:1 Not tainted 6.16.0-rc3-next-20250627-dirty #15839 PREEMPT Hardware name: Samsung Exynos (Flattened Device Tree) Workqueue: events_unbound deferred_probe_work_func Call trace: unwind_backtrace from show_stack+0x10/0x14 show_stack from dump_stack_lvl+0x68/0x88 dump_stack_lvl from __warn+0x94/0x1f0 __warn from warn_slowpath_fmt+0x124/0x1bc warn_slowpath_fmt from drm_bridge_attach+0x2c/0x248 drm_bridge_attach from analogix_dp_bind+0x70/0xc8 analogix_dp_bind from exynos_dp_bind+0x58/0xc4 exynos_dp_bind from component_bind_all+0x11c/0x27c component_bind_all from exynos_drm_bind+0xe8/0x198 exynos_drm_bind from try_to_bring_up_aggregate_device+0x200/0x2d8 try_to_bring_up_aggregate_device from __component_add+0xb0/0x170 __component_add from exynos_dp_probe+0xc0/0x164 exynos_dp_probe from platform_probe+0x5c/0xb8 platform_probe from really_probe+0xe0/0x3d8 really_probe from __driver_probe_device+0x9c/0x1e0 __driver_probe_device from driver_probe_device+0x30/0xc0 driver_probe_device from __device_attach_driver+0xa8/0x120 __device_attach_driver from bus_for_each_drv+0x84/0xdc bus_for_each_drv from __device_attach+0xb0/0x20c __device_attach from bus_probe_device+0x8c/0x90 bus_probe_device from deferred_probe_work_func+0x98/0xe0 deferred_probe_work_func from process_one_work+0x24c/0x70c process_one_work from worker_thread+0x1b8/0x3bc worker_thread from kthread+0x13c/0x264 kthread from ret_from_fork+0x14/0x28 ... ---[ end trace 0000000000000000 ]--- Fix this by switching the driver to the new API. Note the above warning only appears starting with commit a7748dd127ea ("drm/bridge: get/put the bridge reference in drm_bridge_add/remove()") which is the first commmit having added a drm_bridge_get/put() pair and thus exposing the incorrect initial refcount issue. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Fixes: a7748dd127ea ("drm/bridge: get/put the bridge reference in drm_bridge_add/remove()") Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com> Link: https://lore.kernel.org/r/20250627165652.580798-1-m.szyprowski@samsung.com [Luca: add Fixes tag and mention the reason in commit message] Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
2025-06-16drm/bridge: Include <linux/export.h>Thomas Zimmermann
Fix compile-time warnings drivers/gpu/drm/bridge/analogix/analogix-i2c-dptx.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing drivers/gpu/drm/bridge/analogix/analogix_dp_core.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing drivers/gpu/drm/bridge/aux-bridge.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing drivers/gpu/drm/bridge/aux-hpd-bridge.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing drivers/gpu/drm/bridge/imx/imx-legacy-bridge.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing drivers/gpu/drm/bridge/panel.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing drivers/gpu/drm/bridge/samsung-dsim.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing drivers/gpu/drm/bridge/synopsys/dw-hdmi-qp.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing drivers/gpu/drm/bridge/synopsys/dw-hdmi.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing drivers/gpu/drm/bridge/synopsys/dw-mipi-dsi.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing drivers/gpu/drm/bridge/synopsys/dw-mipi-dsi2.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing drivers/gpu/drm/drm_bridge.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing drivers/gpu/drm/drm_bridge_helper.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Fixes: a934a57a42f6 ("scripts/misc-check: check missing #include <linux/export.h> when W=1") Reviewed-by: André Almeida <andrealmeid@igalia.com> Cc: Masahiro Yamada <masahiroy@kernel.org> Cc: Nathan Chancellor <nathan@kernel.org> Link: https://lore.kernel.org/r/20250612121633.229222-4-tzimmermann@suse.de
2025-06-11Merge drm/drm-next into drm-misc-nextThomas Zimmermann
Backmerging to forward to v6.16-rc1 Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
2025-05-28drm/bridge: analogix_dp: Fix clk-disable removalHeiko Stuebner
Commit 6579a03e68ff ("drm/bridge: analogix_dp: Remove the unnecessary calls to clk_disable_unprepare() during probing") removed the mismatched clock_disable calls from analogix_dp_probe. But that patch was created and sent before commit e5e9fa9f7aad ("drm/bridge: analogix_dp: Add support to get panel from the DP AUX bus") was merged, so couldn't know about this change. So in the original patch the last change is if (ret) { dev_err(&pdev->dev, "failed to request irq\n"); - goto err_disable_clk; + return ERR_PTR(ret); } disable_irq(dp->irq); return dp; - -err_disable_clk: - clk_disable_unprepare(dp->clock); - return ERR_PTR(ret); } EXPORT_SYMBOL_GPL(analogix_dp_probe); the analogix_dp_core.c actually now has the runtime-pm handling between disable_irq() and return do introducing another goto err_clk_disable there. So remove that one too and return an error pointer, to not create build breakage. Fixes: 6579a03e68ff ("drm/bridge: analogix_dp: Remove the unnecessary calls to clk_disable_unprepare() during probing") Signed-off-by: Heiko Stuebner <heiko@sntech.de> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com> Link: https://lore.kernel.org/r/20250527225120.3361663-1-heiko@sntech.de Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
2025-05-27drm/bridge: analogix_dp: Remove the unnecessary calls to ↵Damon Ding
clk_disable_unprepare() during probing With the commit f37952339cc2 ("drm/bridge: analogix_dp: handle clock via runtime PM"), the PM operations can help enable/disable the clock. The err_disable_clk label and clk_disable_unprepare() operations are no longer necessary because the analogix_dp_resume() will not be called during probing. Fixes: f37952339cc2 ("drm/bridge: analogix_dp: handle clock via runtime PM") Suggested-by: Douglas Anderson <dianders@chromium.org> Reviewed-by: Douglas Anderson <dianders@chromium.org> Signed-off-by: Damon Ding <damon.ding@rock-chips.com> Reviewed-by: Heiko Stuebner <heiko@sntech.de> Link: https://lore.kernel.org/r/20250302083043.3197235-1-damon.ding@rock-chips.com Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
2025-05-23drm: convert many bridge drivers from devm_kzalloc() to ↵Luca Ceresoli
devm_drm_bridge_alloc() API devm_drm_bridge_alloc() is the new API to be used for allocating (and partially initializing) a private driver struct embedding a struct drm_bridge. For many drivers having a simple code flow in the probe function, this commit does a mass conversion automatically with the following semantic patch. The changes have been reviewed manually for correctness as well as to find any false positives. The patch has been applied with the explicit exclusion of bridge/panel.c, handled by a separate patch. After applying the semantic patch, manually fixed these issues: - 4 drivers need ERR_CAST() instead of PTR_ERR() as the function calling devm_drm_bridge_alloc() returns a pointer - re-added empty lines and comments that the script had removed but that should stay @@ type T; identifier C; identifier BR; expression DEV; expression FUNCS; @@ -T *C; +T *C; ... ( -C = devm_kzalloc(DEV, ...); -if (!C) - return -ENOMEM; +C = devm_drm_bridge_alloc(DEV, T, BR, FUNCS); +if (IS_ERR(C)) + return PTR_ERR(C); | -C = devm_kzalloc(DEV, ...); -if (!C) - return ERR_PTR(-ENOMEM); +C = devm_drm_bridge_alloc(DEV, T, BR, FUNCS); +if (IS_ERR(C)) + return PTR_ERR(C); ) ... -C->BR.funcs = FUNCS; Reviewed-by: Manikandan Muralidharan <manikandan.m@microchip.com> # microchip-lvds.c Reviewed-by: Douglas Anderson <dianders@chromium.org> # parade-ps8640 Tested-by: Douglas Anderson <dianders@chromium.org> # parade-ps8640 Acked-by: Maxime Ripard <mripard@kernel.org> Link: https://lore.kernel.org/r/20250509-drm-bridge-convert-to-alloc-api-v3-2-b8bc1f16d7aa@bootlin.com [Luca: fixed trivial patch conflict in adv7511_drv.c while applying] Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
2025-05-21drm/bridge: anx7625: convert to devm_drm_bridge_alloc() APILuca Ceresoli
This is the new API for allocating DRM bridges. Acked-by: Maxime Ripard <mripard@kernel.org> Reviewed-by: Anusha Srivatsa <asrivats@redhat.com> Link: https://lore.kernel.org/r/20250509-drm-bridge-convert-to-alloc-api-v3-3-b8bc1f16d7aa@bootlin.com Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
2025-05-05drm/bridge: anx7625: change the gpiod_set_value APIAyushi Makhija
Use gpiod_set_value_cansleep() instead of gpiod_set_value() to fix the below call trace in the boot log: [ 5.690534] Call trace: [ 5.690536] gpiod_set_value+0x40/0xa4 [ 5.690540] anx7625_runtime_pm_resume+0xa0/0x324 [anx7625] [ 5.690545] __rpm_callback+0x48/0x1d8 [ 5.690549] rpm_callback+0x6c/0x78 Certain GPIO controllers require access via message-based buses such as I2C or SPI, which may cause the GPIOs to enter a sleep state. Therefore, use the gpiod_set_value_cansleep(). Signed-off-by: Ayushi Makhija <quic_amakhija@quicinc.com> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://lore.kernel.org/r/20250505094245.2660750-7-quic_amakhija@quicinc.com Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
2025-05-05drm/bridge: anx7625: fix anx7625_sink_detect() to return correct hpd statusAyushi Makhija
In the anx7625_sink_detect(), the device is checked to see if it is a panel bridge, and it always sends a "connected" status to the connector. When adding the DP port on port 1 of the anx7625, it incorrectly treats it as a panel bridge and sends an always "connected" status. Instead of checking the status on the panel bridge, it's better to check the hpd_status for connectors that supports hot-plugging. This way, it verifies the hpd_status variable before sending the status to the connector. In case of eDP, anx7625_bridge_detect() will not get called because the bridge->ops condition in anx7625_link_bridge() will not be satisfied. Since anx7625_sink_detect() is called from anx7625_bridge_detect(), this results in the sink_detect logic not being executed for eDP. Signed-off-by: Ayushi Makhija <quic_amakhija@quicinc.com> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com> Link: https://lore.kernel.org/r/20250505094245.2660750-6-quic_amakhija@quicinc.com Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
2025-05-05drm/bridge: anx7625: fix drm_bridge ops flags to support hot-pluggingAyushi Makhija
The anx7625_link_bridge() checks if a device is not a panel bridge and add DRM_BRIDGE_OP_HPD and DRM_BRIDGE_OP_DETECT flags to the drm_bridge->ops. However, on port 1 of the anx7625 bridge, any device added is always treated as a panel bridge, preventing connector_detect() from being called. To resolve this, instead of just checking if it is a panel bridge, verify the type of device based on aux whether it is a DisplayPort or eDP panel. If the device is not of the eDP type, add DRM_BRIDGE_OP_HPD and DRM_BRIDGE_OP_DETECT flags to the to the drm_bridge->ops. Signed-off-by: Ayushi Makhija <quic_amakhija@quicinc.com> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com> Link: https://lore.kernel.org/r/20250505094245.2660750-5-quic_amakhija@quicinc.com Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
2025-05-05drm/bridge: anx7625: enable HPD interruptsAyushi Makhija
When the device enters the suspend state, it prevents HPD interrupts from occurring. To address this, implement .hpd_enable() and .hpd_disable() callbacks functions of the drm_bridge. Signed-off-by: Ayushi Makhija <quic_amakhija@quicinc.com> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com> Link: https://lore.kernel.org/r/20250505094245.2660750-4-quic_amakhija@quicinc.com Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
2025-04-29drm/bridge: analogix-anx6345: convert to devm_drm_bridge_alloc() APILuca Ceresoli
This is the new API for allocating DRM bridges. Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com> Reviewed-by: Andy Yan <andyshrk@163.com> Link: https://patchwork.freedesktop.org/patch/msgid/20250424-drm-bridge-convert-to-alloc-api-v2-3-8f91a404d86b@bootlin.com Signed-off-by: Louis Chauvet <louis.chauvet@bootlin.com>
2025-04-22drm/bridge: analogix_dp: ignore return values of drm_panel_* callsDmitry Baryshkov
Follow the example of other drivers and ignore return values of the drm_panel_prepare() / unprepare() / enable() / disable() calls. There is no possible error recovery, so the driver just logs a message. Tested-by: Damon Ding <damon.ding@rock-chips.com> Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org> Link: https://lore.kernel.org/r/20250401-panel-return-void-v1-6-93e1be33dc8d@oss.qualcomm.com Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
2025-04-22drm/bridge: analogix_dp: inline analogix_dp_prepare_panel()Dmitry Baryshkov
The analogix_dp_prepare_panel() is now only calling a corresponding drm_panel function. Inline it to simplify the code. Tested-by: Damon Ding <damon.ding@rock-chips.com> Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org> Link: https://lore.kernel.org/r/20250401-panel-return-void-v1-5-93e1be33dc8d@oss.qualcomm.com Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
2025-04-22drm/bridge: analogic_dp: drop panel_lockDmitry Baryshkov
The analogix_dp_prepare_panel() function is called from bridge's atomic_pre_enable() and atomic_post_disable() callbacks, which can not happen simultaneously. Drop the useless mutex. Tested-by: Damon Ding <damon.ding@rock-chips.com> Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org> Link: https://lore.kernel.org/r/20250401-panel-return-void-v1-4-93e1be33dc8d@oss.qualcomm.com Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
2025-04-22drm/bridge: analogic_dp: drop panel_is_modesetDmitry Baryshkov
The dp->panel_is_modeset is now a write-only field. Drop it completely. Tested-by: Damon Ding <damon.ding@rock-chips.com> Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org> Link: https://lore.kernel.org/r/20250401-panel-return-void-v1-3-93e1be33dc8d@oss.qualcomm.com Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
2025-04-22drm/bridge: analogix_dp: drop unused argument to analogix_dp_prepare_panel()Dmitry Baryshkov
After previous cleanup all calling sites pass true as is_modeset_prepare argument to analogix_dp_prepare_panel(). Drop dead code depending on that argument being false. Tested-by: Damon Ding <damon.ding@rock-chips.com> Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org> Link: https://lore.kernel.org/r/20250401-panel-return-void-v1-2-93e1be33dc8d@oss.qualcomm.com Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
2025-04-22drm/bridge: analogix_dp: drop extra calls to analogix_dp_prepare_panel()Dmitry Baryshkov
The analogix_dp_prepare_panel() returns immediately if there is no attached panel. Drop several calls to this function which are performed when dp->plat_data->panel is NULL. Tested-by: Damon Ding <damon.ding@rock-chips.com> Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org> Link: https://lore.kernel.org/r/20250401-panel-return-void-v1-1-93e1be33dc8d@oss.qualcomm.com Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
2025-04-21drm/bridge: analogix_dp: Add support for RK3588Damon Ding
Expand enum analogix_dp_devtype with RK3588_EDP, and add max_link_rate and max_lane_count configs for it. Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Damon Ding <damon.ding@rock-chips.com> Link: https://lore.kernel.org/r/20250310104114.2608063-11-damon.ding@rock-chips.com Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
2025-04-21drm/bridge: analogix_dp: Add support for &drm_dp_aux.wait_hpd_asserted()Damon Ding
Add analogix_dpaux_wait_hpd_asserted() to help confirm the HPD state before doing AUX transfers. Signed-off-by: Damon Ding <damon.ding@rock-chips.com> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Douglas Anderson <dianders@chromium.org> Link: https://lore.kernel.org/r/20250310104114.2608063-8-damon.ding@rock-chips.com Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
2025-04-21drm/bridge: analogix_dp: Add support to get panel from the DP AUX busDamon Ding
The main modification is moving the DP AUX initialization from function analogix_dp_bind() to analogix_dp_probe(). In order to get the EDID of eDP panel during probing, it is also needed to advance PM operations to ensure that eDP controller and phy are prepared for AUX transmission. Signed-off-by: Damon Ding <damon.ding@rock-chips.com> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Douglas Anderson <dianders@chromium.org> Link: https://lore.kernel.org/r/20250310104114.2608063-7-damon.ding@rock-chips.com Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
2025-04-21drm/bridge: analogix_dp: Support to get &analogix_dp_device.plat_data and ↵Damon Ding
&analogix_dp_device.aux Add two new functions: one to find &analogix_dp_device.plat_data via &drm_dp_aux, and the other to get &analogix_dp_device.aux. Both of them serve for the function of getting panel from DP AUX bus, which is why they are included in a single commit. Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Damon Ding <damon.ding@rock-chips.com> Link: https://lore.kernel.org/r/20250310104114.2608063-6-damon.ding@rock-chips.com Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
2025-04-21drm/bridge: analogix_dp: Add support for phy configuration.Damon Ding
Add support to configurate link rate, lane count, voltage swing and pre-emphasis with phy_configure(). It is helpful in application scenarios where analogix controller is mixed with the phy of other vendors. Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Damon Ding <damon.ding@rock-chips.com> Link: https://lore.kernel.org/r/20250310104114.2608063-4-damon.ding@rock-chips.com Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
2025-04-21drm/bridge: analogix_dp: Remove CONFIG_PM related check in ↵Damon Ding
analogix_dp_bind()/analogix_dp_unbind() Remove the check related to CONFIG_PM in order to make the code more concise, as the CONFIG_PM should be a required option for many drivers. In addition, it is preferable to use devm_pm_runtime_enable() instead of manually invoking pm_runtime_enable() followed by pm_runtime_disable(). Suggested-by: Douglas Anderson <dianders@chromium.org> Reviewed-by: Douglas Anderson <dianders@chromium.org> Signed-off-by: Damon Ding <damon.ding@rock-chips.com> Link: https://lore.kernel.org/r/20250310104114.2608063-3-damon.ding@rock-chips.com Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
2025-04-21drm/bridge: analogix_dp: Add irq flag IRQF_NO_AUTOEN instead of calling ↵Damon Ding
disable_irq() The IRQF_NO_AUTOEN can be used for the drivers that don't want interrupts to be enabled automatically via devm_request_threaded_irq(). Using this flag can provide be more robust compared to the way of calling disable_irq() after devm_request_threaded_irq() without the IRQF_NO_AUTOEN flag. Suggested-by: Douglas Anderson <dianders@chromium.org> Reviewed-by: Douglas Anderson <dianders@chromium.org> Signed-off-by: Damon Ding <damon.ding@rock-chips.com> Link: https://lore.kernel.org/r/20250310104114.2608063-2-damon.ding@rock-chips.com Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
2025-04-15drm/bridge: anx7625: Use devm_pm_runtime_enable()Chen-Yu Tsai
The anx7625 driver is open coding what devm_pm_runtime_enable() does. Switch to the common helper instead. Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com> Link: https://patch.msgid.link/20250409093814.3977025-1-wenst@chromium.org Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
2025-04-02drm/bridge: anx78xx: Switch to common helpers to power up/down dp linkAndy Yan
Use the common dp link power up/down helpers to avoid duplicating code. Signed-off-by: Andy Yan <andy.yan@rock-chips.com> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com> Link: https://lore.kernel.org/r/20250318063452.4983-4-andyshrk@163.com Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
2025-04-02drm/bridge: anx6345: Switch to common helpers to power up/down dp linkAndy Yan
Use the common dp link power up/down helpers to avoid duplicating code. Signed-off-by: Andy Yan <andy.yan@rock-chips.com> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com> Link: https://lore.kernel.org/r/20250318063452.4983-3-andyshrk@163.com Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
2025-03-27drm/bridge: anx7625: Remove redundant 'flush_workqueue()' callsChen Ni
'destroy_workqueue()' already drains the queue before destroying it, so there is no need to flush it explicitly. Remove the redundant 'flush_workqueue()' calls. This was generated with coccinelle: @@ expression E; @@ - flush_workqueue(E); destroy_workqueue(E); Signed-off-by: Chen Ni <nichen@iscas.ac.cn> Reviewed-by: Robert Foss <rfoss@kernel.org> Reviewed-by: Douglas Anderson <dianders@chromium.org> Signed-off-by: Douglas Anderson <dianders@chromium.org> Link: https://lore.kernel.org/r/20250312090132.1624445-1-nichen@iscas.ac.cn
2025-03-20drm/bridge: Add encoder parameter to drm_bridge_funcs.attachMaxime Ripard
The drm_bridge structure contains an encoder pointer that is widely used by bridge drivers. This pattern is largely documented as deprecated in other KMS entities for atomic drivers. However, one of the main use of that pointer is done in attach to just call drm_bridge_attach on the next bridge to add it to the bridge list. While this dereferences the bridge->encoder pointer, it's effectively the same encoder the bridge was being attached to. We can make it more explicit by adding the encoder the bridge is attached to to the list of attach parameters. This also removes the need to dereference bridge->encoder in most drivers. Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Douglas Anderson <dianders@chromium.org> Tested-by: Douglas Anderson <dianders@chromium.org> Tested-by: Luca Ceresoli <luca.ceresoli@bootlin.com> Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com> Link: https://patchwork.freedesktop.org/patch/msgid/20250313-bridge-connector-v6-1-511c54a604fb@kernel.org Signed-off-by: Maxime Ripard <mripard@kernel.org>
2025-02-19drm/bridge: Pass full state to atomic_post_disableMaxime Ripard
It's pretty inconvenient to access the full atomic state from drm_bridges, so let's change the atomic_post_disable hook prototype to pass it directly. Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Douglas Anderson <dianders@chromium.org> Tested-by: Douglas Anderson <dianders@chromium.org> Link: https://lore.kernel.org/r/20250213-bridge-connector-v3-5-e71598f49c8f@kernel.org Signed-off-by: Maxime Ripard <mripard@kernel.org>
2025-02-19drm/bridge: Pass full state to atomic_disableMaxime Ripard
It's pretty inconvenient to access the full atomic state from drm_bridges, so let's change the atomic_disable hook prototype to pass it directly. Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Douglas Anderson <dianders@chromium.org> Tested-by: Douglas Anderson <dianders@chromium.org> Link: https://lore.kernel.org/r/20250213-bridge-connector-v3-4-e71598f49c8f@kernel.org Signed-off-by: Maxime Ripard <mripard@kernel.org>
2025-02-19drm/bridge: Pass full state to atomic_enableMaxime Ripard
It's pretty inconvenient to access the full atomic state from drm_bridges, so let's change the atomic_enable hook prototype to pass it directly. Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Douglas Anderson <dianders@chromium.org> Tested-by: Douglas Anderson <dianders@chromium.org> Link: https://lore.kernel.org/r/20250213-bridge-connector-v3-3-e71598f49c8f@kernel.org Signed-off-by: Maxime Ripard <mripard@kernel.org>
2025-02-19drm/bridge: Pass full state to atomic_pre_enableMaxime Ripard
It's pretty inconvenient to access the full atomic state from drm_bridges, so let's change the atomic_pre_enable hook prototype to pass it directly. Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Douglas Anderson <dianders@chromium.org> Tested-by: Douglas Anderson <dianders@chromium.org> Link: https://lore.kernel.org/r/20250213-bridge-connector-v3-2-e71598f49c8f@kernel.org Signed-off-by: Maxime Ripard <mripard@kernel.org>
2025-02-18drm/bridge: analogix_dp: Use devm_platform_ioremap_resource()Shixiong Ou
Convert platform_get_resource(), devm_ioremap_resource() to a single call to devm_platform_ioremap_resource(). Signed-off-by: Shixiong Ou <oushixiong@kylinos.cn> Reviewed-by: Robert Foss <rfoss@kernel.org> Signed-off-by: Robert Foss <rfoss@kernel.org> Link: https://patchwork.freedesktop.org/patch/msgid/20250128065645.27140-1-oushixiong1025@163.com
2025-01-04ASoC: hdmi-codec: pass data to get_dai_id tooDmitry Baryshkov
The upcoming DRM connector HDMI codec implementation is going to use codec-specific data in the .get_dai_id to get drm_connector. Pass data to the callback, as it is done with other hdmi_codec_ops callbacks. Acked-by: Mark Brown <broonie@kernel.org> Tested-by: Dave Stevenson <dave.stevenson@raspberrypi.com> Link: https://patchwork.freedesktop.org/patch/msgid/20241224-drm-bridge-hdmi-connector-v10-1-dc89577cd438@linaro.org Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2024-12-20drm/bridge:anx7625: Update HDCP content statusXin Ji
When user enabled HDCP feature, userspace will set HDCP content to DRM_MODE_CONTENT_PROTECTION_DESIRED. Next, anx7625 will update HDCP content to DRM_MODE_CONTENT_PROTECTION_ENABLED if down stream support HDCP feature. As anx7625 bridge IC will be power down after call .atomic_disable(), then all HDCP status will be lost on chip. So we should reestablish HDCP again in .atomic_enable(), and update hdcp content to DESIRE if current HDCP content is ENABLE in .atomic_disable(). v4: - Change HDCP content value to DESIRED if HDCP status is ENABLE in bridge interface .atomic_enable(). v3: - Move hdcp content value checking from bridge interface .atomic_check() to .atomic_enable() v2: - Add more details in commit message Signed-off-by: Xin Ji <xji@analogixsemi.com> Tested-by: Pin-yen Lin <treapking@chromium.org> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://lore.kernel.org/r/20241219070330.224996-1-xji@analogixsemi.com Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20241219070330.224996-1-xji@analogixsemi.com
2024-12-16drm/bridge: anx7625: use eld_mutex to protect access to connector->eldDmitry Baryshkov
Reading access to connector->eld can happen at the same time the drm_edid_to_eld() updates the data. Take the newly added eld_mutex in order to protect connector->eld from concurrent access. Reviewed-by: Maxime Ripard <mripard@kernel.org> Link: https://patchwork.freedesktop.org/patch/msgid/20241206-drm-connector-eld-mutex-v2-2-c9bce1ee8bea@linaro.org Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2024-12-13drm: Drop explicit initialization of struct i2c_device_id::driver_data to 0Uwe Kleine-König
These drivers don't use the driver_data member of struct i2c_device_id, so don't explicitly initialize this member. This prepares putting driver_data in an anonymous union which requires either no initialization or named designators. But it's also a nice cleanup on its own. While add it, also remove commas after the sentinel entries. Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Douglas Anderson <dianders@chromium.org> Reviewed-by: Liu Ying <victor.liu@nxp.com> # ite-it6263.c Signed-off-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com> Signed-off-by: Douglas Anderson <dianders@chromium.org> Link: https://patchwork.freedesktop.org/patch/msgid/20241204105827.1682632-2-u.kleine-koenig@baylibre.com
2024-10-03drm/bridge: anx7625: Drop EDID cache on bridge power offPin-yen Lin
The bridge might miss the display change events when it's powered off. This happens when a user changes the external monitor when the system is suspended and the embedded controller doesn't not wake AP up. It's also observed that one DP-to-HDMI bridge doesn't work correctly when there is no EDID read after it is powered on. Drop the cache to force an EDID read after system resume to fix this. Fixes: 8bdfc5dae4e3 ("drm/bridge: anx7625: Add anx7625 MIPI DSI/DPI to DP") Signed-off-by: Pin-yen Lin <treapking@chromium.org> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Douglas Anderson <dianders@chromium.org> Signed-off-by: Douglas Anderson <dianders@chromium.org> Link: https://patchwork.freedesktop.org/patch/msgid/20240926092931.3870342-2-treapking@chromium.org
2024-08-19drm: bridge: anx7625: Use of_property_read_variable_u8_array()Rob Herring (Arm)
There's no need to get the length of an DT array property before parsing the array. of_property_read_variable_u8_array() takes a minimum and maximum length and returns the actual length (or error code). This is part of a larger effort to remove callers of of_get_property() and similar functions. of_get_property() leaks the DT property data pointer which is a problem for dynamically allocated nodes which may be freed. Signed-off-by: Rob Herring (Arm) <robh@kernel.org> Signed-off-by: Robert Foss <rfoss@kernel.org> Link: https://patchwork.freedesktop.org/patch/msgid/20240731201407.1838385-4-robh@kernel.org
2024-07-19drm/bridge: analogix: remove unused struct 'bridge_init'Dr. David Alan Gilbert
commit 6a1688ae8794 ("drm/bridge: ptn3460: Convert to I2C driver model") has dropped all the users of the struct bridge_init from the exynos_dp_core, while retaining unused structure definition. Later on the driver was reworked and the definition migrated to the analogix_dp driver. Remove unused struct bridge_init definition. Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20240520125551.11534-1-linux@treblig.org Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2024-06-27drm/bridge: analogix_dp: handle AUX transfer timeoutsLucas Stach
Timeouts on the AUX bus are to be expected in certain normal operating conditions. There is no need to raise an error log or re-initialize the whole AUX state machine. Simply acknowledge the AUX_ERR interrupt and let upper layers know about the timeout. Signed-off-by: Lucas Stach <l.stach@pengutronix.de> Reviewed-by: Robert Foss <rfoss@kernel.org> Tested-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Robert Foss <rfoss@kernel.org> Link: https://patchwork.freedesktop.org/patch/msgid/20240619182200.3752465-14-l.stach@pengutronix.de
2024-06-27drm/bridge: analogix_dp: only read AUX status when an error occuredLucas Stach
All AUX error responses raise the AUX_ERR interrupt, so there is no need to read the AUX status register in normal operation. Only read the status when an error occurred and we can expect a different status than OK. Signed-off-by: Lucas Stach <l.stach@pengutronix.de> Reviewed-by: Robert Foss <rfoss@kernel.org> Tested-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Robert Foss <rfoss@kernel.org> Link: https://patchwork.freedesktop.org/patch/msgid/20240619182200.3752465-13-l.stach@pengutronix.de
generated by cgit v1.2.3 (git 2.46.0) at 2025-12-10 23:53:01 +0000