| Age | Commit message (Collapse) | Author |
|
intel_de_wait*() take the timeout in milliseconds. Include
that information in the function name to make life less
confusing. I'll also be introducing microsecond variants
of these later.
Done with cocci:
@@
@@
(
static int
- intel_de_wait
+ intel_de_wait_ms
(...)
{
...
}
|
static int
- intel_de_wait_fw
+ intel_de_wait_fw_ms
(...)
{
...
}
|
static int
- intel_de_wait_for_set
+ intel_de_wait_for_set_ms
(...)
{
...
}
|
static int
- intel_de_wait_for_clear
+ intel_de_wait_for_clear_ms
(...)
{
...
}
)
@@
@@
(
- intel_de_wait
+ intel_de_wait_ms
|
- intel_de_wait_fw
+ intel_de_wait_fw_ms
|
- intel_de_wait_for_set
+ intel_de_wait_for_set_ms
|
- intel_de_wait_for_clear
+ intel_de_wait_for_clear_ms
)
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patch.msgid.link/20251110172756.2132-4-ville.syrjala@linux.intel.com
Reviewed-by: Suraj Kandpal <suraj.kandpal@intel.com>
Acked-by: Jani Nikula <jani.nikula@intel.com>
|
|
Move the is_hdmi_frl to intel_hdmi.c. Rename it appropriately and
make it non static.
Signed-off-by: Suraj Kandpal <suraj.kandpal@intel.com>
Reviewed-by: Arun R Murthy <arun.r.murthy@intel.com>
Link: https://patch.msgid.link/20251101032513.4171255-5-suraj.kandpal@intel.com
|
|
The remaining utils display needs from i915_utils.h are primarily
MISSING_CASE() and fetch_and_zero(), with a couple of
i915_inject_probe_failure() uses.
To avoid excessive churn, add duplicates of MISSING_CASE() and
fetch_and_zero() to intel_display_utils.h, and switch display to use the
display utils.
As long as there are display files that include i915_drv.h, which
includes i915_utils.h, we'll need #ifndef guards for MISSING_CASE() and
fetch_and_zero() in both utils headers. We can remove them once display
no longer depends on i915_drv.h.
A couple of files in display still need i915_utils.h for
i915_inject_probe_failure(). Annotate this. They will be handled
separately.
Reviewed-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://patch.msgid.link/79f9e31ca64c8c045834d48e20ceb0c515d1e9e1.1761146196.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
|
Prefer generic poll helpers over i915 custom helpers.
The functional change is losing the exponentially growing sleep of
__wait_for(), which used to be 1, 2, 4, and 8 ms in this particular
case.
Use an arbitrary constant 4 ms sleep instead. The timeout remains,
varying between 20 ms and 3000 ms.
Cc: Suraj Kandpal <suraj.kandpal@intel.com>
Reviewed-by: Jouni Högander <jouni.hogander@intel.com>
Link: https://lore.kernel.org/r/fc3a67f9de0049f415a276bba1c11a4df97e01d6.1756383233.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
|
Since intel_fdi_compute_pipe_bpp() is no longer FDI-specific and
now applies to all connectors. Move it to intel_link_bw.c,
and rename to intel_link_bw_compute_pipe_bpp().
v2: Remove unused header file.
Cc: Shankar Uma <uma.shankar@intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Cc: Vidya Srinivas <vidya.srinivas@intel.com>
Signed-off-by: Lee Shawn C <shawn.c.lee@intel.com>
[Imre: Remove unused intel_fdi.h include from intel_hdmi.c]
Reviewed-by: Imre Deak <imre.deak@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://lore.kernel.org/r/20250901055721.219995-3-shawn.c.lee@intel.com
|
|
While performing HDMI compliance testing, test equipment may request
different bpc output for signal measurement. However, display driver
typically determines the maximum available bpc based on HW bandwidth.
This change leverages the existing debugfs (intel_force_link_bpp)
to manage HDMI bpc, and making it easier to pass HDMI CTS.
v2: Using exist variable max_requested_bpc.
v3: Extend intel_force_link_bpp to support HDMI as suggested by Imre.
v4: Update commit message suggested by Jani.
v5: Remove unused header file.
Cc: Shankar Uma <uma.shankar@intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Cc: Vidya Srinivas <vidya.srinivas@intel.com>
Signed-off-by: Lee Shawn C <shawn.c.lee@intel.com>
Reviewed-by: Imre Deak <imre.deak@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://lore.kernel.org/r/20250901055721.219995-2-shawn.c.lee@intel.com
|
|
Prefer the register read specific wait function over i915 wait_for().
Reviewed-by: Gustavo Sousa <gustavo.sousa@intel.com>
Link: https://lore.kernel.org/r/c5d3044114b4464799a2fded18cda7946d95c4f6.1753956266.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
|
We only support resolution up to 4k for single pipe when using
YUV420 format so we prune these modes and restrict the plane size
at src. This is because pipe scaling will not support YUV420 scaling
for hwidth > 4096.
--v2
-Use output format to check [Ville]
-Add Bspec references
-Modify commit messge to point to why this is needed
--v3
-Use a function skl_scaler_mode_valid which is routed throug
intel_pfit_mode_valid [Ville]
-Combine the check conditons [Jonathan]
--v4
-mode_valid functions should return drm_mode_status [Jani]
--v5
-Use skl_scaler_max_src_size [Ankit]
Bspec: 49247, 50441
Signed-off-by: Suraj Kandpal <suraj.kandpal@intel.com>
Reviewed-by: Jonathan Cavitt <jonathan.cavitt@intel.com> #v2
Reviewed-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Link: https://lore.kernel.org/r/20250708043328.1086192-2-suraj.kandpal@intel.com
|
|
A number of files have unnecessary i915_reg.h includes. Drop them.
Reviewed-by: Michał Grzelak <michal.grzelak@intel.com>
Link: https://lore.kernel.org/r/7c4002322f4d8132fd2eaa1a4d688539cdd043c3.1749469962.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
|
This is a scripted split of the display related register macros from
i915_reg.h to display/intel_display_regs.h. As a starting point, move
all the macros that are only used in display code (or GVT). If there are
users in core i915 code or soc/, or no users anywhere, keep the macros
in i915_reg.h. This is done in groups of macros separated by blank
lines, moving the comments along with the groups.
Some manually picked macro groups are kept/moved regardless of the
heuristics above.
This is obviously a very crude approach. It's not perfect. But there are
4.2k lines in i915_reg.h, and its refactoring has ground to a halt. This
is the big hammer that splits the file to two, and enables further
cleanup.
Cc: Suraj Kandpal <suraj.kandpal@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Suraj Kandpal <suraj.kandpal@intel.com> # v2
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://lore.kernel.org/r/20250606102256.2080073-1-jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
|
Remove the last uses of struct drm_i915_private from intel_hdmi.c, and
drop the dependency on i915_drv.h.
v2: Rebase
Reviewed-by: Chaitanya Kumar Borah <chaitanya.kumar.borah@intel.com>
Link: https://lore.kernel.org/r/24183605ac919ca115b1b25fa386643409814c82.1746175756.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
|
Following the convention, convert intel_hdmi.c to use an intel_connector
pointer everywhere, calling this pointer connector. If the intel
connector must be casted from a drm_connector, call this pointer
_connector and use this pointer only for the casting.
v2: Use for_each_new_intel_connector_in_state(). (Jani)
Cc: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://lore.kernel.org/r/20250428134716.3396802-3-imre.deak@intel.com
|
|
Now that INTEL_PCH_TYPE() and HAS_PCH_*() macros are under display, and
accept a struct intel_display pointer, use that instead of struct
drm_i915_private pointer in display code.
This is done naively by running:
$ sed -i 's/\(INTEL_PCH_TYPE\|HAS_PCH_[A-Z0-9_-]*\)([^)]*)/\1(display)/g' \
$(find drivers/gpu/drm/i915/display -name "*.c")
and fixing the fallout, i.e. removing unused local i915 variables and
adding display variables where needed.
v2: Rebase
Reviewed-by: Chaitanya Kumar Borah <chaitanya.kumar.borah@intel.com>
Link: https://lore.kernel.org/r/999f4d7b8ed11739b1c5ec8d6408fc39d5e3776b.1744880985.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
|
Prefer display->platform based platform detection over the old IS_*()
macros.
Reviewed-by: Chaitanya Kumar Borah <chaitanya.kumar.borah@intel.com>
Link: https://lore.kernel.org/r/02659f1144180f328167734f7e31499833749c8d.1744222449.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
|
Currently VRR is not supported with HDMI, but we can still leverage
the VRR Timing Generator to achieve a fixed refresh rate.
Call intel_vrr_compute_config() for HDMI which will handle the vrr
timings to have fixed refresh rate with VRR Timing Generator.
v2: Improve commit message. (Ville).
Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Reviewed-by: Mitul Golani <mitulkumar.ajitkumar.golani@intel.com> (#v1)
Link: https://lore.kernel.org/r/20250324133248.4071909-2-ankit.k.nautiyal@intel.com
|
|
Sync to fix conlicts between drm-xe-next and drm-intel-next.
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
|
Unify naming wrt both the prefix and suffix.
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/33bb513e186c8838acde37f87aee732b63bd5702.1740564009.git.jani.nikula@intel.com
|
|
https://gitlab.freedesktop.org/drm/i915/kernel into drm-next
drm/i915 feature pull for v6.15:
Features and functionality:
- Enable DP 128b/132b SST DSC (Jani, Imre)
- Allow DSB to perform commits when VRR is enabled (Ville)
- Compute HDMI PLLs for SNPS/C10 PHYs for rates not in fixed tables (Ankit)
- Allow DSB usage when PSR is enabled on LNL+ (Jouni)
- Enable Panel Replay mode change without full modeset (Jouni)
- Enable async flips with compressed buffers on ICL+ (Ville)
- Support luminance based brightness control via DPCD for eDP (Suraj)
- Enable VRR enable/disable without full modeset (Mitul, Ankit)
- Add debugfs facility for force testing HDCP 1.4 (Suraj)
- Add scaler tracepoints, improve plane tracepoints (Ville)
- Improve DMC wakelock debugging facilities (Gustavo)
- Allow GuC SLPC default strategies on MTL+ for performance (Rodrigo)
- Provide more information on display faults (Ville)
Refactoring and cleanups:
- Continue conversions to struct intel_display (Ville, Jani, Suraj, Imre)
- Joiner and Y plane reorganization (Ville)
- Move HDCP debugfs to intel_hdcp.c (Jani)
- Clean up and unify LSPCON interfaces (Jani)
- Move code out of intel_display.c to reduce its size (Ville)
- Clean up and simplify DDI port enabling/disabling (Imre)
- Make LPT LP a dedicated PCH type, refactor (Jani)
- Simplify DSC range BPG offset calculation (Ankit)
- Scaler cleanups (Ville)
- Remove unused code from GVT (David Alan Gilbert)
- Improve plane debugging (Ville)
- DSB and VRR refactoring (Ville)
Fixes:
- Check if vblank is sufficient for DSC prefill and scaler (Mitul)
- Fix Mesa clear color alignment regression (Ville)
- Add missing TC DP PHY lane stagger delay (Imre)
- Fix DSB + VRR usage for PTL+ (Ville)
- Improve robustness of display VT-d workarounds (Ville)
- Fix platforms for dbuf tracker state service programming (Ravi)
- Fix DMC wakelock support conditions (Gustavo)
- Amend DMC wakelock register ranges (Gustavo)
- Disable the Common Primary Timing Generator (CMTG) (Gustavo)
- Enable C20 PHY SSC (Suraj)
- Add workaround for DKL PHY DP mode write (Nemesa)
- Fix build warnings on clamp() usage (Guenter Roeck, Ankit)
- Fix error handling while adding a connector (Imre)
- Avoid full modeset at probe on vblank delay mismatches (Ville)
- Fix encoder HDMI check for HDCP line rekeying (Suraj)
- Fix HDCP repeater authentication during topology change (Suraj)
- Handle display PHY power state reset for power savings (Mika)
- Fix typos all over the place (Nitin)
- Update HDMI TMDS C20 parameters for various platforms (Dnyaneshwar)
- Guarantee a minimum hblank time for 128b/132b and 8b/10b MST (Arun, Imre)
- Do not hardcode LSPCON settle timeout (Giedrius Statkevičius)
Xe driver changes:
- Re-use display vmas when possible (Maarten)
- Remove double pageflip (Maarten)
- Enable DP tunneling (Imre)
- Separate i915 and xe tracepoints (Ville)
DRM core changes:
- Increase DPCD eDP display control CAP size to 5 bytes (Suraj)
- Add DPCD eDP version 1.5 definition (Suraj)
- Add timeout parameter to drm_lspcon_set_mode() (Giedrius Statkevičius)
Merges:
- Backmerge drm-next (Jani)
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/87h64j7b7n.fsf@intel.com
|
|
Going forward, struct intel_display is the main display device data
pointer. Convert the intel_mode_valid_max_plane_size() helper to struct
intel_display, allowing further conversions elsewhere.
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/6e7810c793ecc8ff6a31569830bf162156245668.1739378095.git.jani.nikula@intel.com
|
|
Going forward, struct intel_display is the main display device data
pointer. Convert the intel_cpu_transcoder_mode_valid()() helper to
struct intel_display, allowing further conversions elsewhere.
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/f9246a00a2e7aabaffb86f863915a4307e1fd3f8.1739378095.git.jani.nikula@intel.com
|
|
Pass intel_display to the display power stuff. These are spread
all over the place so tend to hinder clean conversions of whole
files.
TODO: The gt part/unpark power domain shenanigans need some
kind of more abstract interface...
v2: Deal with cmtg
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250206185533.32306-7-ville.syrjala@linux.intel.com
|
|
Bring rc1 to start the new release dev.
Signed-off-by: Maxime Ripard <mripard@kernel.org>
|
|
Try HDMI PLL alogorithm for C10 PHY, if there are no pre-computed tables.
Also get rid of the helpers to get rate for HDMI for C10/20 PHY, as we no
longer depend only on pre-computed tables.
Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Reviewed-by: Suraj Kandpal <suraj.kandpal@intel.com>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Tested-by: Khaled Almahallawy <khaled.almahallawy@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250120042122.1029481-6-ankit.k.nautiyal@intel.com
|
|
Try SNPS_PHY HDMI alogorithm, if there are no pre-computed tables.
Also get rid of the helper to get rate for HDMI snps phy, as we no
longer depend only on pre-computed tables.
v2:
-Prefer pre-computed tables over computed values from algorithm. (Jani)
Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Reviewed-by: Suraj Kandpal <suraj.kandpal@intel.com>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Tested-by: Khaled Almahallawy <khaled.almahallawy@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250120042122.1029481-3-ankit.k.nautiyal@intel.com
|
|
The mode_valid() callbacks of drm_encoder, drm_crtc and drm_bridge
take a const struct drm_display_mode argument. Change the mode_valid
callback of drm_connector to also take a const argument.
Acked-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Liviu Dudau <liviu.dudau@arm.com>
Reviewed-by: Raphael Gallais-Pou <rgallaispou@gmail.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: Maxime Ripard <mripard@kernel.org>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241214-drm-connector-mode-valid-const-v2-5-4f9498a4c822@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
|
|
Propagate errors from intel_hdmi_init_connector() to be able to handle
them at callers. This is similar to intel_dp_init_connector().
Cc: Sergey Senozhatsky <senozhatsky@chromium.org>
Cc: Ville Syrjala <ville.syrjala@linux.intel.com>
Reported-and-tested-by: Sergey Senozhatsky <senozhatsky@chromium.org>
Closes: https://lore.kernel.org/r/20241031105145.2140590-1-senozhatsky@chromium.org
Reviewed-by: Sergey Senozhatsky <senozhatsky@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/cdaf9e32cc4880c46e120933438c37b4d87be12e.1735568047.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
|
Going forward, struct intel_display will be the main display driver
structure. Convert the main display entry points to struct
intel_display.
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Gustavo Sousa <gustavo.sousa@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241204102150.2223455-1-jani.nikula@intel.com
|
|
We don't need to shout out loud if there is a Link Integrity
Failure. This does not mean HDCP has failed, it is expected and
taken into account in the HDCP Spec. The real failure happens when
we are not able to reauthenticate and get HDCP running again for
which we already have the right logging.
--v2
-Remove the log altogether [Ankit]
--v3
-Remove useless display variable
Signed-off-by: Suraj Kandpal <suraj.kandpal@intel.com>
Reviewed-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241202060410.1872121-1-suraj.kandpal@intel.com
|
|
Convert intel_display_device.[ch] to struct intel_display, including
callers, but excluding intel_display_device_probe() which will be
handled in follow-up.
v2: fix display->drm = display->drm goof-up
Reviewed-by: Vinod Govindapillai <vinod.govindapillai@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/865b27b66f599e707081d46fca9f679e19a4e8aa.1731321183.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
|
Changes in Dynamic Range and Mastering infoframe
should not trigger a full modeset. Therefore, allow
fastset. DP SDP programming is already hooked up in the
fastset flow but HDMI AVI infoframe update is not, add it.
Any other infoframe that can be fastset should be added to
the helper intel_hdmi_fastset_infoframes().
v3:
- Create a wrapper intel_ddi_update_pipe_hdmi to stick to
uniform naming (Jani)
- Do not disable HDMI AVI infoframe if already disabled (Uma)
v2:
- Update HDMI AVI infoframe during fastset.
Signed-off-by: Chaitanya Kumar Borah <chaitanya.kumar.borah@intel.com>
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
Signed-off-by: Animesh Manna <animesh.manna@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241023044122.3889137-1-chaitanya.kumar.borah@intel.com
|
|
There are some unconverted stragglers left in the HDCP API still using
struct drm_i915_private. Convert to struct intel_display.
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/9680cc9e5ed7798a736fa73ad9ea0eb9c88e64bb.1730146000.git.jani.nikula@intel.com
|
|
struct intel_display will replace struct drm_i915_private as the main
device pointer for display code. Switch gmbus code over to it.
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/d784e4799ab5095baa5c8fd840920066878c6273.1730146000.git.jani.nikula@intel.com
|
|
The panel fitter code doesn't really have much to do with the
rest of intel_panel.c, so extract it all into its own file.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241016143134.26903-9-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
|
|
In preparation of ultrajoiner, use number of pipes in the
intel_mode_valid_max_plane_size helper, instead of joiner flag.
v2: Use num_joined_pipes 1 where there are no joined pipes (Ville)
Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Reviewed-by: Suraj Kandpal <suraj.kandpal@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240916102836.2149012-4-ankit.k.nautiyal@intel.com
|
|
Use a forward declaration for struct cec_notifier instead of including
media/cec-notifier.h in intel_display_types.h, and only include it where
needed.
Also realize that a lot of places depend on including linux/debugfs.h
via intel_display_types.h -> media/cec-notifier.h -> media/cec.h, and
include that too where needed.
v2: hsw_ips.c also needs debugfs.h (kernel test robot)
Reviewed-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240827104521.4151471-1-jani.nikula@intel.com
|
|
Stop including drm/drm_probe_helper.h in intel_display_types.h and only
include it where needed.
Reviewed-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/88f565495763d0f31a84f31059ab3b01af9bf2b9.1724689818.git.jani.nikula@intel.com
|
|
There are only a handful of files that need the struct intel_hdcp_shim
definition. Move it to a new file intel_hdcp_shim.h and include where
needed.
Reviewed-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/8dc62bed1f4c827730f66f91a18e1cf0712df123.1724689818.git.jani.nikula@intel.com
|
|
Replace a comma between expression statements by a semicolon.
Signed-off-by: Chen Ni <nichen@iscas.ac.cn>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240903025558.493977-1-nichen@iscas.ac.cn
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
|
Going forward, struct intel_display shall replace struct
drm_i915_private as the main display device data pointer type. Convert
intel_hdmi.[ch] to struct intel_display. Remove intel_hdmi_to_i915().
Some stragglers are left behind where needed.
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/fa74b67935eb7e8084f57688a9683a36cb1d1a4c.1725012870.git.jani.nikula@intel.com
|
|
Avoid the implicit dev_priv local variable use, and pass dev_priv
explicitly to the TRANS_DDI_FUNC_CTL register macro.
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/4ccf75561aa0fb209fd71c85e9089b0350570fd6.1717514638.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
|
Avoid the implicit dev_priv local variable use, and pass dev_priv
explicitly to the PIPEDSL register macro.
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/53b751f5a883318d44b690284d2e9d5a43fba860.1717514638.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
|
Clean up the top level include/drm directory by grouping all the Intel
specific files under a common subdirectory.
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Dave Airlie <airlied@gmail.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Cc: Jaroslav Kysela <perex@perex.cz>
Cc: Takashi Iwai <tiwai@suse.com>
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Acked-by: Lucas De Marchi <lucas.demarchi@intel.com>
Acked-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/2d645970a65cfd13e01fd8195b35bf9483ae9c2f.1717075103.git.jani.nikula@intel.com
|
|
Avoid the implicit dev_priv local variable use, and pass dev_priv
explicitly to the ADL_TVIDEO_DIP_AS_SDP_DATA register macro.
Reviewed-by: Chaitanya Kumar Borah <chaitanya.kumar.borah@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/75a4f817f7c73277b2b8021275ccb9a4f3716953.1716808214.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
|
Avoid the implicit dev_priv local variable use, and pass dev_priv
explicitly to the ICL_VIDEO_DIP_PPS_DATA register macro.
Reviewed-by: Chaitanya Kumar Borah <chaitanya.kumar.borah@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/fb7c308dd655d1bc4af44ab9c88b5f5245d8a5d6.1716808214.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
|
Avoid the implicit dev_priv local variable use, and pass dev_priv
explicitly to the GLK_TVIDEO_DIP_DRM_DATA register macro.
Reviewed-by: Chaitanya Kumar Borah <chaitanya.kumar.borah@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/bab2d0385b748c34bec262afaf491be881990033.1716808214.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
|
Avoid the implicit dev_priv local variable use, and pass dev_priv
explicitly to the HSW_TVIDEO_DIP_VSC_DATA register macro.
Reviewed-by: Chaitanya Kumar Borah <chaitanya.kumar.borah@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/2f0ed82eb9c759feb3978e38f3b2835f359d6d1f.1716808214.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
|
Avoid the implicit dev_priv local variable use, and pass dev_priv
explicitly to the HSW_TVIDEO_DIP_GMP_DATA register macro.
Reviewed-by: Chaitanya Kumar Borah <chaitanya.kumar.borah@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/fff766dca0e790a801fb7d1ad78980da69d3b9f7.1716808214.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
|
Avoid the implicit dev_priv local variable use, and pass dev_priv
explicitly to the HSW_TVIDEO_DIP_SPD_DATA register macro.
Reviewed-by: Chaitanya Kumar Borah <chaitanya.kumar.borah@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/97412857f7580994ea9c9c0c8f5f778261f7e71b.1716808214.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
|
Avoid the implicit dev_priv local variable use, and pass dev_priv
explicitly to the HSW_TVIDEO_DIP_VS_DATA register macro.
Reviewed-by: Chaitanya Kumar Borah <chaitanya.kumar.borah@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/6f676d9b2bce0d4911e888c5efeacaddef98579c.1716808214.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
|
Avoid the implicit dev_priv local variable use, and pass dev_priv
explicitly to the HSW_TVIDEO_DIP_AVI_DATA register macro.
Reviewed-by: Chaitanya Kumar Borah <chaitanya.kumar.borah@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/113e40bf4d42a38c1be09a7ce0159dc828356ebc.1716808214.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|