summaryrefslogtreecommitdiff
path: root/drivers/gpu/drm/i915/display/intel_hotplug_irq.c
AgeCommit message (Collapse)Author
2025-10-31drm/i915/display: switch to intel_display_utils.hJani Nikula
The remaining utils display needs from i915_utils.h are primarily MISSING_CASE() and fetch_and_zero(), with a couple of i915_inject_probe_failure() uses. To avoid excessive churn, add duplicates of MISSING_CASE() and fetch_and_zero() to intel_display_utils.h, and switch display to use the display utils. As long as there are display files that include i915_drv.h, which includes i915_utils.h, we'll need #ifndef guards for MISSING_CASE() and fetch_and_zero() in both utils headers. We can remove them once display no longer depends on i915_drv.h. A couple of files in display still need i915_utils.h for i915_inject_probe_failure(). Annotate this. They will be handled separately. Reviewed-by: Luca Coelho <luciano.coelho@intel.com> Link: https://patch.msgid.link/79f9e31ca64c8c045834d48e20ceb0c515d1e9e1.1761146196.git.jani.nikula@intel.com Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2025-09-24drm/i915/irq: move check for HAS_HOTPLUG() inside i9xx_hpd_irq_ack()Jani Nikula
We want to avoid using the display dependent HAS_HOTPLUG() in generic irq code. Since the enabling of I915_DISPLAY_PORT_INTERRUPT depends on HAS_HOTPLUG() to begin with, we don't really expect to get the irqs for !HAS_HOTPLUG(). At least in theory, checking for HAS_HOTPLUG() inside i9xx_hpd_irq_ack() should not have any impact. Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://lore.kernel.org/r/2f97c077e67667bf420196c7381553d5286da958.1758637773.git.jani.nikula@intel.com Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2025-09-05drm/i915/hpd: Fix mtp_tc_hpd_enable_detection()Ville Syrjälä
Set the MTP TC hotplug bits in the correct register. Shouldn't matter really as this only gets used for eDP detection and there should be never eDP on TC ports on current hw. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20250902153915.4423-1-ville.syrjala@linux.intel.com Reviewed-by: Jani Nikula <jani.nikula@intel.com>
2025-06-09drm/i915: split out display register macros to a separate fileJani Nikula
This is a scripted split of the display related register macros from i915_reg.h to display/intel_display_regs.h. As a starting point, move all the macros that are only used in display code (or GVT). If there are users in core i915 code or soc/, or no users anywhere, keep the macros in i915_reg.h. This is done in groups of macros separated by blank lines, moving the comments along with the groups. Some manually picked macro groups are kept/moved regardless of the heuristics above. This is obviously a very crude approach. It's not perfect. But there are 4.2k lines in i915_reg.h, and its refactoring has ground to a halt. This is the big hammer that splits the file to two, and enables further cleanup. Cc: Suraj Kandpal <suraj.kandpal@intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Lucas De Marchi <lucas.demarchi@intel.com> Reviewed-by: Suraj Kandpal <suraj.kandpal@intel.com> # v2 Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com> Link: https://lore.kernel.org/r/20250606102256.2080073-1-jani.nikula@intel.com Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2025-05-07drm/i915/irq: move i915->irq_lock to display->irq.lockJani Nikula
Observe that i915->irq_lock is no longer used to protect anything outside of display. Make it a display thing. This allows us to remove the ugly #define irq_lock irq.lock hack from xe compat header. Note that this is slightly more subtle than it first looks. For i915, there's no functional change here. The lock is moved. However, for xe, we'll now have *two* locks, xe->irq.lock and display->irq.lock. These should protect different things, though. Indeed, nesting in the past would've lead to a deadlock because they were the same lock. With the i915 references gone, we can make a handful more files independent of i915_drv.h. Reviewed-by: Gustavo Sousa <gustavo.sousa@intel.com> Link: https://lore.kernel.org/r/6d8d2ce0f34a9c7361a5e2fcf96bb32a34c57e76.1746536745.git.jani.nikula@intel.com [Jani: Fixed a comment while applying.] Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2025-04-22drm/i915/display: pass struct intel_display to PCH macrosJani Nikula
Now that INTEL_PCH_TYPE() and HAS_PCH_*() macros are under display, and accept a struct intel_display pointer, use that instead of struct drm_i915_private pointer in display code. This is done naively by running: $ sed -i 's/\(INTEL_PCH_TYPE\|HAS_PCH_[A-Z0-9_-]*\)([^)]*)/\1(display)/g' \ $(find drivers/gpu/drm/i915/display -name "*.c") and fixing the fallout, i.e. removing unused local i915 variables and adding display variables where needed. v2: Rebase Reviewed-by: Chaitanya Kumar Borah <chaitanya.kumar.borah@intel.com> Link: https://lore.kernel.org/r/999f4d7b8ed11739b1c5ec8d6408fc39d5e3776b.1744880985.git.jani.nikula@intel.com Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2025-03-21drm/i915/display: rename I915_HAS_HOTPLUG() to HAS_HOTPLUGJani Nikula
Most of the other display feature check macros are just HAS_<something>. Follow suit with hotplug check. Reviewed-by: Uma Shankar <uma.shankar@intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://lore.kernel.org/r/c386ef007ae8bdda1bb9b1b353b1cd2957897842.1742481923.git.jani.nikula@intel.com
2025-03-21drm/i915/irq: convert intel_display_irq.[ch] interfaces to struct intel_displayJani Nikula
Going forward, struct intel_display is the main display device data pointer. Convert the external interfaces of intel_display_irq.[ch] to struct intel_display. Reviewed-by: Uma Shankar <uma.shankar@intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://lore.kernel.org/r/83b552154761d2790d8c774707e8d7612037bdf5.1742481923.git.jani.nikula@intel.com
2025-03-21drm/i915/hotplug: convert intel_hotplug_irq.[ch] to struct intel_displayJani Nikula
Going forward, struct intel_display is the main display device data pointer. Convert as much as possible of intel_hotplug_irq.[ch] to struct intel_display. Reviewed-by: Uma Shankar <uma.shankar@intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://lore.kernel.org/r/8ddf27ea31b543f88c5f124f029c2eaa06a9aae7.1742481923.git.jani.nikula@intel.com
2025-03-21drm/i915/hotplug: convert hotplug irq handling to intel_de_*()Jani Nikula
All the registers handled here are display registers. Switch from intel_uncore_*() to intel_de_*() functions. Reviewed-by: Uma Shankar <uma.shankar@intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://lore.kernel.org/r/cd1149b3ebcb7a9f73830b99957f09e468cd5fd9.1742481923.git.jani.nikula@intel.com
2025-03-21drm/i915/hotplug: convert intel_hotplug.[ch] to struct intel_displayJani Nikula
Going forward, struct intel_display is the main display device data pointer. Convert as much as possible of intel_hotplug.[ch] to struct intel_display. Reviewed-by: Uma Shankar <uma.shankar@intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://lore.kernel.org/r/cf382dbfacf1445b26fbe1e7c011e7a3ea6e1594.1742481923.git.jani.nikula@intel.com
2025-01-23drm/i915/display: fix typos in i915/display filesNitin Gote
Fix all typos in files under drm/i915/display reported by codespell tool. v2: - Include british and american spelling, as those are not typos. - Fix commenting style. <Jani> v3: Fix "In case" wrongly capitalized and also fix comment style. <Krzysztof Niemiec> Signed-off-by: Nitin Gote <nitin.r.gote@intel.com> Reviewed-by: Krzysztof Niemiec <krzysztof.niemiec@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20250120081517.3237326-8-nitin.r.gote@intel.com Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
2024-11-22drm/i915/irq: emphasize display_irqs_enabled is only about VLV/CHVJani Nikula
Use display_irqs_enabled only on VLV/CHV where it's relevant. Rename to vlv_display_irqs_enabled, to emphasize it's really only about VLV/CHV. Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/f60104ea59687cb8c65b18b4f9ddd832a643407d.1732102179.git.jani.nikula@intel.com Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2024-10-30drm/i915/gmbus: convert to struct intel_displayJani Nikula
struct intel_display will replace struct drm_i915_private as the main device pointer for display code. Switch gmbus code over to it. Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/d784e4799ab5095baa5c8fd840920066878c6273.1730146000.git.jani.nikula@intel.com
2024-09-27drm/i915/hotplug: Add comment for XE_LPD+ SHPD_FILTER_CNT valueSuraj Kandpal
Add the reason for having SHPD_FILTER_CNT value for XE_LPD+ and above as 250us instead of 500us. --v2 -Update commit message [Matt] Signed-off-by: Suraj Kandpal <suraj.kandpal@intel.com> Reviewed-by: Matt Roper <matthew.d.roper@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240923031007.1058072-4-suraj.kandpal@intel.com
2024-09-27drm/i915/hotplug: Reduce SHPD_FLITER_CNT for ICL and aboveSuraj Kandpal
Reduce SHPD_CNT to 250us for ICL and above as it lines up with DP1.4a(Table3-4) spec. --v2 -Update commit message and comment [Matt] --v3 -drop condition and use value of 250us for ICL and above [Matt] Signed-off-by: Suraj Kandpal <suraj.kandpal@intel.com> Reviewed-by: Matt Roper <matthew.d.roper@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240924073450.1261535-2-suraj.kandpal@intel.com
2024-09-03drm/i915/dp: convert intel_dp_aux.[ch] to struct intel_displayJani Nikula
Going forward, struct intel_display shall replace struct drm_i915_private as the main display device data pointer type. Convert intel_dp_aux.[ch] to struct intel_display. Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/f295369d573d217323a624fd4b8dc477a6cf183b.1725012870.git.jani.nikula@intel.com
2024-06-07drm/i915: pass dev_priv explicitly to PORT_HOTPLUG_STATJani Nikula
Avoid the implicit dev_priv local variable use, and pass dev_priv explicitly to the PORT_HOTPLUG_STAT register macro. Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/9a47bba4ab8fa4b1a8e8ceea2ba5301bed54805d.1717514638.git.jani.nikula@intel.com Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2024-06-07drm/i915: pass dev_priv explicitly to PORT_HOTPLUG_ENJani Nikula
Avoid the implicit dev_priv local variable use, and pass dev_priv explicitly to the PORT_HOTPLUG_EN register macro. Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/3f4c3fb108f62db5d9b6bdabd0fbeb6650e14e82.1717514638.git.jani.nikula@intel.com Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2024-04-09drm/i915: move display_irqs_enabled to display substructJani Nikula
The info is related to display, and should be placed under i915->display. Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Acked-by: Lucas De Marchi <lucas.demarchi@intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/f6ac8e4c6ec8621bacf3db58a2bf156bd636f1d1.1712599670.git.jani.nikula@intel.com
2024-01-03drm/i915/mtl: Add fake PCH for Meteor LakeHaridhar Kalvala
Correct the implementation trying to detect MTL PCH with the MTL fake PCH id. On MTL, both the North Display (NDE) and South Display (SDE) functionality reside on the same die (the SoC die in this case), unlike many past platforms where the SDE was on a separate PCH die. The code is (badly) structured today in a way that assumes the SDE is always on the PCH for modern platforms, so on platforms where we don't actually need to identify the PCH to figure out how the SDE behaves (i.e., all DG1/2 GPUs as well as MTL and LNL),we've been assigning a "fake PCH" as a quickhack that allows us to avoid restructuring a bunch of the code.we've been assigning a "fake PCH" as a quick hack that allows us to avoid restructuring a bunch of the code. Removed unused macros of LNL amd MTL as well. v2: Reorder PCH_MTL conditional check (Matt Roper) Reverting to PCH_MTL for PICA interrupt(Matt Roper) Signed-off-by: Haridhar Kalvala <haridhar.kalvala@intel.com> Reviewed-by: Matt Roper <matthew.d.roper@intel.com> Signed-off-by: Matt Roper <matthew.d.roper@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20231219185233.1469675-1-haridhar.kalvala@intel.com
2023-10-31drm/i915: Move the g45 PEG band gap HPD workaround to the HPD codeVille Syrjälä
We are asked to reprogram PEG_BAND_GAP_DATA prior to enabling hotplug detection on the g45 HDMI/DP ports. Currently we do said reprogamming from the DP/HDMI connector initialization functions. That code should be mostly platform agnostic so clearly not the best place for this. Move the workaround to the place where we actually enable HPD detection. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20231012124033.26983-1-ville.syrjala@linux.intel.com Reviewed-by: Jani Nikula <jani.nikula@intel.com>
2023-09-21drm/i915/xe2lpd: Add support for HPDGustavo Sousa
Hotplug setup for Xe2_LPD differs from Xe_LPD+ by the fact that the extra programming for hotplug inversion and DDI HPD filter duration is not necessary anymore. As mtp_hpd_irq_setup() is reasonably small, prefer to fork it into a new function for Xe2_LPD instead of adding a platform check. v2: Add extra bspec reference and fix missing else (Matt Roper) BSpec: 68970, 69940 Signed-off-by: Gustavo Sousa <gustavo.sousa@intel.com> Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com> Reviewed-by: Matt Roper <matthew.d.roper@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230919192128.2045154-16-lucas.demarchi@intel.com
2023-09-21drm/i915/xe2lpd: Handle port AUX interruptsGustavo Sousa
Differently from previous version, Xe2_LPD groups all port AUX interrupt bits into PICA interrupt registers. While at it, drop some trailing newlines. BSpec: 68958, 69697 Signed-off-by: Gustavo Sousa <gustavo.sousa@intel.com> Reviewed-by: Matt Roper <matthew.d.roper@intel.com> Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230919192128.2045154-13-lucas.demarchi@intel.com
2023-07-26drm/i915/hotplug: Reduce SHPD_FILTER to 250usSuraj Kandpal
On TGP, the RTC (always running) was reduced from 3MHz to 32KHz. As a result of this change, when HPD active going low pulse or HPD IRQ is presented and the refclk (19.2MHz) is not toggling already toggling, there is a 60 to 90us synchronization delay which effectively reduces the duration of the IRQ pulse to less than the programmed 500us filter value and the hot plug interrupt is NOT registered. Solution was to Reduce SHPD_FILTER to 250us for ADL and above. This solution was derived when the below patch was floated. [1]https://patchwork.freedesktop.org/patch/532187 and after some internal discussion Ville's suggestion made sense. Bspec: 68970 Cc: Uma Shankar <uma.shankar@intel.com> Cc: Ville Syrjala <ville.syrjala@linux.intel.com> Suggested-by: Ville Syrjala <ville.syrjala@linux.intel.com> Signed-off-by: Suraj Kandpal <suraj.kandpal@intel.com> Reviewed-by: Uma Shankar <uma.shankar@intel.com> Signed-off-by: Uma Shankar <uma.shankar@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230720104624.3063544-1-suraj.kandpal@intel.com
2023-05-16drm/i915/irq: split out display irq handlingJani Nikula
Split (non-hotplug) display irq handling out of i915_irq.[ch] into display/intel_display_irq.[ch]. v3: - Preserve [I915_MAX_PIPES] harder (kernel test robot) v2: - Rebase - Preserve [I915_MAX_PIPES] in functions (kernel test robot) Reviewed-by: Gustavo Sousa <gustavo.sousa@intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230515101738.2399816-3-jani.nikula@intel.com
2023-05-16drm/i915/irq: split out hotplug irq handlingJani Nikula
Split hotplug irq handling out of i915_irq.[ch] into display/intel_hotplug_irq.[ch]. The line between the new intel_hotplug_irq.[ch] and the existing intel_hotplug.[ch] needs further clarification, but the first step is to move the stuff out of i915_irq.[ch]. Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Reviewed-by: Gustavo Sousa <gustavo.sousa@intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230515101738.2399816-2-jani.nikula@intel.com
generated by cgit v1.2.3 (git 2.46.0) at 2025-12-10 12:56:29 +0000